FPE 200, FPE 210 Vishay Draloric RF Power Plate Capacitors for Higher Voltages Class 1 Ceramic FEATURES * Low losses * High reliability * High voltage ratings APPLICATIONS These high technology are designed for usage in high frequency heating and welding equipment were high voltage ratings are required. CAPACITANCE RANGE 1000 pF to 1500 pF QUICK REFERENCE DATA DESCRIPTION VALUE Ceramic Class 1 Ceramic Dielectric Type CAPACITANCE TOLERANCE 20 %, 10 % R85 FPE 200 Voltage (Vp) CERAMIC DIELECTRIC FPE 210 R85 (TCC - 750 ppm/K) 30 000 Min. Capacitance (pF) 1000 1500 RATED VOLTAGE Max. Capacitance (pF) 1000 1500 30 kVp (= RF peak voltage + DC voltage) Mounting Screw terminal DIELECTRIC STRENGTH TEST MATERIAL Capacitor elements made from Class 1 ceramic dielectric with noble metal electrodes. Flexible connection terminals copper/brass, silver plated, to allow for series and parallel interconnection 50 000 VDC, 5 minutes 30 000 VAC, 50 Hz, 5 minutes DISSIPATION FACTOR Max. 0.05 % Measuring frequencies: 300 kHz or 100 kHz MARKING Type designator, capacitance value and tolerance, rated RF voltage (peak value), ceramic material code, production date code, manufacturer logo. INSULATION RESISTANCE FINISH OPERATING TEMPERATURE RANGE Noble metal electrodes and terminals protective lacquered. The contoured insulating rim is additionally glazed - 55 C to + 100 C Document Number: 22128 Revision: 14-Apr-11 Min. 10 000 M (at 25 C) For technical questions, contact: powcap@vishay.com www.vishay.com 1 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 FPE 200, FPE 210 RF Power Plate Capacitors for Higher Voltages Class 1 Ceramic Vishay Draloric SAP PART NUMBER AND ELECTRICAL DATA PART NUMBER CAP. VALUE (pF) CERAMIC TYPE FPE 200, FPE 210 FPE200WV102##BJ1 1000 R85 FPE210WV152##BJ1 RATED VOLTAGE (1) (kVp) 30 1500 RATED POWER (2) (kvar) RATED CURRENT (ARMS) 160 60 90 90 Notes * ## 14th to 15th digit: Capacitance tolerance code 20 % = 38, 10 % = 36 (1) Rated voltage = RF peak value + DC voltage when min. 80 % U DC (2) The surface temperature during operation must not exceed + 100 C DIMENSIONS in millimeters (inches) FPE 200: 73 2 (2.87 0.08) FPE 210: 56 1 (2.21 0.04) O 28 (1.10 Dia.) O 210 max. 8.27 Dia. max. 32.5 (1.28) M10 thread DERATING DIAGRAMS FPE200WV102##BJ1 Ug [kVp] 100 FPE210WV152##BJ1 0.06 MHz Ig [ARMS] Qg [kvar] 1000 3.58 MHz Ug [kVp] 100 Ug 0.02 MHz 9.54 MHz Ig [ARMS] Qg [kvar] 1000 Ug 10 100 10 100 Qg 1 Qg Ig 0.1 0.001 10 1 10 Ig 0.01 www.vishay.com 2 0.1 1 10 Frequency [MHz] 100 1 1000 0.1 0.001 0.01 For technical questions, contact: powcap@vishay.com 0.1 1 Frequency [MHz] 10 1 100 Document Number: 22128 Revision: 14-Apr-11 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 11-Mar-11 www.vishay.com 1