Document Number: 22128 For technical questions, contact: powcap@vishay.com www.vishay.com
Revision: 14-Apr-11 1
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
www.vishay.com/doc?91000
RF Power Plate Capacitors for Higher Voltages
Class 1 Ceramic
FPE 200, FPE 210
Vishay Draloric
MATERIAL
Capacitor elements made from Class 1 ceramic dielectric
with noble metal electrodes.
Flexible connection terminals copper/brass, silver plated, to
allow for series and parallel interconnection
MARKING
Type designator, capacitance value and tolerance, rated RF
voltage (peak value), ceramic material code, production
date code, manufacturer logo.
FINISH
Noble metal electrodes and terminals protective lacquered.
The contoured insulating rim is additionally glazed
FEATURES
• Low losses
• High reliability
• High voltage ratings
APPLICATIONS
These high technology are designed for usage in high
frequency heating and welding equipment were high voltage
ratings are required.
CAPACITANCE RANGE
1000 pF to 1500 pF
CAPACITANCE TOLERANCE
± 20 %, ± 10 %
CERAMIC DIELECTRIC
R85 (TCC - 750 ppm/K)
RATED VOLTAGE
30 kVp (= RF peak voltage + DC voltage)
DIELECTRIC STRENGTH TEST
50 000 VDC, 5 minutes
30 000 VAC, 50 Hz, 5 minutes
DISSIPATION FACTOR
Max. 0.05 %
Measuring frequencies:
300 kHz or 100 kHz
INSULATION RESISTANCE
Min. 10 000 M (at 25 °C)
OPERATING TEMPERATURE RANGE
- 55 °C to + 100 °C
QUICK REFERENCE DATA
DESCRIPTION VALUE
Ceramic Class 1
Ceramic Dielectric R85
Type FPE 200 FPE 210
Voltage (Vp) 30 000
Min. Capacitance (pF) 1000 1500
Max. Capacitance (pF) 1000 1500
Mounting Screw terminal
www.vishay.com For technical questions, contact: powcap@vishay.com Document Number: 22128
2Revision: 14-Apr-11
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
www.vishay.com/doc?91000
FPE 200, FPE 210
Vishay Draloric RF Power Plate Capacitors for Higher Voltages
Class 1 Ceramic
Notes
• ## 14th to 15th digit: Capacitance tolerance code ± 20 % = 38, ± 10 % = 36
(1) Rated voltage = RF peak value + DC voltage when min. 80 % UDC
(2) The surface temperature during operation must not exceed + 100 °C
SAP PART NUMBER AND ELECTRICAL DATA
PART NUMBER CERAMIC
CAP.
VALUE
(pF)
RATED
VOLTAGE (1)
(kVp)
RATED
POWER (2)
(kvar)
RATED
CURRENT
(ARMS)
TYPE FPE 200, FPE 210
FPE200WV102##BJ1 R85 1000 30 160 60
FPE210WV152##BJ1 1500 90 90
DIMENSIONS in millimeters (inches)
DERATING DIAGRAMS
FPE200WV102##BJ1 FPE210WV152##BJ1
Ø 28
(1.10 Dia.)
Ø 210 max.
8.27 Dia. max.
32.5 (1.28)
FPE 200: 73 ± 2 (2.87 ± 0.08)
FPE 210: 56 ± 1 (2.21 ± 0.04)
M10 thread
1
10
100
1000
0.1
1
10
100
Ig [ARMS]
Qg [kvar]
Ug [kVp]
0.001 0.01 0.1 1 10 100 1000
U
g
Q
g
I
g
Frequency [MHz]
3.58 MHz
0.06 MHz
1
10
100
1000
0.1
1
10
100
0.001 0.01 0.1 1 10 100
Ig [ARMS]
Qg [kvar]
Ug [kVp]
Frequency [MHz]
U
g
Q
g
I
g
9.54 MHz0.02 MHz
Document Number: 91000 www.vishay.com
Revision: 11-Mar-11 1
Disclaimer
Legal Disclaimer Notice
Vishay
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
