Single IDC Contact 18-24 AWG: WTB INTERCONNECT 9176-500 The 917X series of surface mount Insulation Displacement Connectors (IDC) were developed to meet the harsh automotive and industrial market applications for connecting individual wires directly to a PCB ranging from 14 AWG to 28 AWG. This industry proven contact system has been tested to automotive levels of shock, vibration, and temperature cycling to prove their reliability and robustness. This new single contact was developed as a standalone component to enhance the application uses with the IDC technology. The simplicity of inserting a wire into an SMT contact with a small tool or optional retention / termination cap allows a wide range of devices to be connected to the PCB without soldering. In SSL applications specifically, these contacts are used to bring power and signal onto the PCB or are used to daisy chain multiple boards together in a long string. While the IDC contact provides a gas-tight connection to conductor of the wire, the optional cap provides a positive strain relief even in the harshest conditions. In case of repair, the wires can be removed and replace up to three times. The single 9176 series contact and cap accepts 18 AWG to 24 AWG wires with an insulation diameter ranging from 1.1mm to 2.1mm. These dual beam contacts support a 10 amp current rating with a large SMT solder base to provide maximum stability on the PCB. The optional locking strain relief cap acts as the termination tool for severe vibration applications. APPLICATIONS * Connecting discrete wire components directly to the PCB * Bringing power and signals onto a PCB * Daisy chaining PCB's together to create a continuous string of boards * Application notes: refer to 201-01-124 FEATURES AND BENEFITS * * * * * * IDC contact is supplied in T&R pockets for standard SMT placement IDC contact provides a gas-tight connection to the PCB for long term reliability Optional termination cap provides additional strain relief for severe environments Tested to automotive levels on shock, vibration and temperature cycling for reliability Reduced total applied cost versus solder or crimp processes Individual contacts can be located anywhere on the PCB based on specific application ELECTRICAL ENVIRONMENTAL MECHANICAL * Current Rating: 10 Amps/Contact * Voltage Rating: Dependant on component proximity * Operating Temperature: -40C to +125C * * * * Insulator Material: Nylon 46: UL94V0 Contact Material: Phosphor Bronze Plating: Tin over Nickel Durability: 3 Cycles HOW TO ORDER - CONTACT OPTIONS 70 9176 001 Prefix 70 = Contact Series Number of Ways No of Code Ways Details 001 1 Page 3 Code 501 511 522 532 5XX 006 Wire Gauge Size Plating Option 006 = Pure Tin all over Accepted Wire Gauge 18 Gauge Stranded 20 Gauge Solid or Stranded 22 Gauge Solid or Stranded 24 Gauge Solid or Stranded HOW TO ORDER - CAP OPTIONS 60 9176 001 Prefix 60 = Cap Series Number of Ways No of Code Ways Details 001 1 Page 5 X00 5XX Wire Gauge Size Code 516 521 Wire Insulation (AWG) 1.1-1.6 (22-24) 1.6-2.1 (18-20) Insulator Color Code Color 000 Black 100 White Application Industrial Lighting CONNECTOR/TOOLING PART NUMBER MATRIX AWG 18 20 22 24 SERIES 9176-500 IDC HAND INSERTION TOOLING* ACCESSORY CAPS Wire Plastic Metal Cap Application Positions Part Number White Black Insulation (medium volume) (high volume) Tool O 1.6 - 2.1 1p 709176001501006 069176702001000 069176701901000 069176701801000 609176001521100 609176001521000 O 1.6 - 2.1 1p 709176001511006 069176702001000 069176701901000 069176701801000 609176001521100 609176001521000 O 1.1 - 1.6 1p 709176001522006 069176702002000 069176701902000 069176701801000 609176001516100 609176001516000 O 1.1 - 1.6 1p 709176001532006 069176702002000 069176701902000 069176701801000 609176001516100 609176001516000 * Hand Insertion Tooling and Cap Application - Universal Hand Tool 067000773001000; Consult Application Notes 201-01-124 Certification: UL File #E90723 1 Single IDC Contact 18-24 AWG: WTB INTERCONNECT 9176-500 CONTACT DETAILS Code 501 511 522 532 Accepted Wire Gauge 18 AWG Stranded 20 AWG Solid and Stranded 22 AWG Solid and Stranded 24 AWG Solid and Stranded A 0.72 0.60 0.47 0.37 NOTES: 1. CONNECTOR FOR IDC WIRE TO BOARD CONNECTION. 2. CONTACT MATERIAL: PHOSPHOR BRONZE. 3. CONTACT PLATING: PURE TIN. 4. CONNECTOR DESIGNED TO ACCEPT BETWEEN 18 AND 24 GAUGE STRANDED WIRE. SEE TABLE. 5. ALL DIMENSIONS FOR REFERENCE UNLESS OTHERWISE STATED. 6. FOR FULL PRODUCT SPECIFICATION REFER TO ELCO SPEC 201-01-106 AND APPLICATION NOTES 201-01-124. 7. SMT PCB LAYOUT, REFER TO PAGE 3. 8. PACKING IN TAPE AND REEL, QUANTITY 1000 PER REEL. 9. WHEN REQUIRED, MATCHING CAP DETAILS ON DRAWING 60-9176-001-5XX-X00S. 10. ASSEMBLY TOOLING ON PAGE 5 (WITH CAP AND WITHOUT CAP). PACKING DETAILS REEL QTY LEADER TRAILER 2 1000 480MM 120MM Single IDC Contact 18-24 AWG: WTB INTERCONNECT 9176-500 18-24 AWG IDC WIRE TO BOARD CONNECTOR SINGLE CONTACT SMT PCB LAYOUT PURE TIN PADS ORIENTATION OF CONTACT ON PAD ASSEMBLED/INSTALLED PRODUCTS NOTES: 1. CONNECTOR CAN BE USED WITH CONTACT ONLY OR WITH OPTIONAL CAP. 2. OUTLINE OF CAP WHEN USED. 3. FOR FULL PRODUCT SPECIFICATION REFER TO ELCO SPEC 201-01-106 AND 201-01-124. 4. DIMENSIONS SHOWN ARE REFERENCED DIMENSIONS. 5. ASSEMBLY TOOLING ON PAGE 43 (WITH CAP AND WITHOUT CAP). 3 Single IDC Contact 18-24 AWG: WTB INTERCONNECT 9176-500 ASSEMBLY TOOLING - CAP USED CAP APPLICATION TOOL 06-9176-7018-01-000 ORIENTATE CAP IN TOOL UNIVERSAL HANDLE 06 7000 7730 01 000 NOTES: 1. ASSEMBLY TOOLING FOR CAP. 2. AREA OF PCB TO BE KEPT CLEAR OF COMPONENTS, TACKS PERMISSIBLE. 3. WIRE AND CAP INSERTED IN ONE OPERATION. 4. REFER TO APPLICATION NOTE 201-01-124 FOR FURTHER INFORMATION. 5. REFER BELOW WHEN CONTACT USED WITHOUT CAP. ASSEMBLY TOOLING - CAP NOT USED WIRE ONTO CONTACT 2.1 WIRE (18-20 AWG) 1.6 WIRE (22-24 AWG) 06-9176-7019-01-000 06-9176-7020-01-000 06-9176-7019-02-000 06-9176-7020-02-000 UNIVERSAL HANDLE 06 7000 7730 01 000 NOTES: 1. ASSEMBLY TOOLING FOR CONTACT ONLY, NO CAP USED. 2. MINIMUM AREA OF PCB TO BE KEPT CLEAR OF COMPONENTS, TRACK PERMISSIBLE. 3. REFER TO TABLE FOR CORRECT TOOL/WIRE COMBINATION. 4. REFER TO APPLICATION NOTE 201-01-124 FOR FURTHER INFORMATION. 4 Wire Guage 22-24 AWG 18-20 AWG Wire Metal Tool Plastic Tool Handle Insulation o High Volume Small to Medium Volume 1.10 to 1.60 06-9176-7019-02-000 06-9176-7020-02-000 06-7000-7730-01-000 1.60 to 2.10 06-9176-7019-01-000 06-9176-7020-01-000 06-7000-7730-01-000 Single IDC Contact 18-24 AWG: WTB 9176-500 INTERCONNECT CAP DETAILS Code Insulator Diameter B Text C (AWG) 516 1.1 to 1.6 (22-24) 1.00 O 1.6 521 1.6 to 2.1 (18-20) 1.50 O 2.1 NOTES: 1. CAP FOR IDC WIRE TO BOARD CONNECTION. 2. CAP MATERIAL: GLASS FILLED NYLON 46, COLOR SEE PAGE 1. 3. CAPS DESIGNED TO ACCOMMODATE WIRE INSULATION DIAMETERS 1.1MM TO 2.1MM. 4. ALL DIMENSIONS FOR REFERENCE UNLESS OTHERWISE STATED. 5. FOR FULL PRODUCT SPECIFICATION REFER TO ELCO SPEC 201-01-106, APPLICATION NOTES 201-01-124. 6. PACKING IN BAGS, QUANTITY 1000 PER BAG. 7. FOR INSTALATION DETAILS REFER TO DRAWING 70-9176-001-XX-006S. 5 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: AVX: 069176701801000 069176701901000 069176701902000 069176702002000 069176702001000