F-3106F 2/08
© KEMET Electronics Corporation • PO Box 5928 • Greenville, SC 29606 • www.kemet.com
2
Index
General Performance Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . .3-6
HIGH TEMPERATURE CERAMIC CAPACITORS
HT/HP - Standard Series - (+200°C) Ceramic Capacitors C0G (NP0), X7R Dielectric . . . . . . . . . . . .. . . . . . . . . . . . . . .7-9
HV-High Voltage Series - (+200°C) Ceramic Capacitors C0G (NP0), X7R Dielectric . . . . . . . . . . . . . . . . . . . . . . . . .10-12
Ceramic Cased Capacitors C3 General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..13
SCR/SCA Standard Axial & Radial Ceramic Capacitors - C0G (NP0) Dielectric . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . .14-16
SRR/SRA Standard Axial & Radial Ceramic Capacitors - X7R Dielectric . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14-16
ACR/ACA High Temperature (+200°C) Axial & Radial Ceramic Capacitors - C0G (NP0) Dielectric . . . . . . . . . . . . .. . .17-19
ARR/ARA High Temperature (+200°C) Axial & Radial Ceramic Capacitors - X7R Dielectric . . . . . . . . . . . . . . . . . . . .17-19
TCR/TCA High Temperature (+260°C) Axial & Radial Ceramic Capacitors - C0G (NP0) Dielectric . . . . . . . . . . . . . . .20-22
TRR/TRA High Temperature (+260°C) Axial & Radial Ceramic Capacitors - X7R Dielectric . . . . . . . . . . . . . . . . . . . .20-22
VCR - C3 High Temperature/High Voltage (+260°C) Axial & Radial Ceramic Capacitors - C0G (NP0) Dielectric . . . .23-25
VRR - C3 High Temperature/High Voltage (+260°C) Axial & Radial Ceramic Capacitors - X7R Dielectric . . . . . . . . . .23-25
HIGH VOLTAGE CERAMIC CAPACITORS
HV Series, High Voltage, Radial Conformally Coated, C0G (NP0), X7R Dielectric . . . . . . . . . . . . . . . . . . . . . . . . . . ..26-30
HV Series, High Voltage, Radial Conformally Coated, C0G (NP0) & X7R Dielectric (MIL-PRF-49467 Equivalent) . . . .31-33
HS Series, High Voltage, Radial Conformally Coated, Space Quality, C0G (NP0) & X7R Dielectric . . . . . . . . . . . . . ..34-38
High Voltage, Ceramic Chip Military Equivalent Tested - C0G (NP0), X7R Dielectric . . . . . . . . . . . . . . . . . . . . . . . . . . .39-43
SM Series, High Voltage Surface Mount Ceramic Chip - C0G (NP0), X7R Dielectric . . . . . . . . . . . . . . . . . . . . . . . . .44-48
D Series, High Voltage Surface Mount Ceramic Disc - C0G (NP0), X7R, X5U Dielectric . . . . . . . . . . . . . . . . .. . . . . .49-50
© KEMET Electronics Corporation • PO Box 5928 • Greenville, SC 29606 • www.kemet.com 3
High Temperature, High Voltage
Performance Characteristics
GENERAL SPECIFICATIONS
Working Voltage:
C0G 50, 100, 200, 500, 1k, 2k, 3k, 4k, 5k, 7.5k, 10k,
15k, 20k
X7R 50, 100, 200, 500, 1k, 2k, 3k, 4k, 5k, 7.5k, 10k, 15k,
20k, 30k, 40k, 50k
X5U 3k, 4k, 5k, 7.5k, 10k, 15k, 20k
Temperature Characteristics:
C0G 0 + 30 PPM / °C from - 55°C to + 125°C (1)
X7R + 15% from - 55°C to + 125°C
X5U + 22%, -56% from -55°C to + 85°C
Capacitance Tolerance:
C0G +0.5pF, +1%, +2%, +5%, +10%
X7R ±5%, ±10%, ±20%, +80% / -20%, +100% / -0%
X5U ±5%, ±10%, ±20%, +80% / -20%, +100% / -0%
Construction:
Epoxy encapsulated - meets flame test requirements
of UL Standard 94V-0.
High-temperature solder - meets EIA RS-198, Method 302,
Condition B (260°C for 10 seconds)
Termination Material:
Check individual Series: Part Number and Ordering Information
for Termination Materials offered in each series.
Solderability:
MIL-STD 202, Method 208
(Test Method: ANSI/J-STD-002)
Test A for through-hole mount and surface mount leaded.
Test B for surface mount leadless components.
Terminal Strength:
MIL-STD 202, Method 208, Condition A (2.3kg or 5 lbs)
Resistance to Solvents:
MIL-STD 202, Method 215
Resistance to Soldering Heat:
MIL-STD 202, Method 210, Test Condition C
ELECTRICAL
Capacitance @ 25°C:
Within specified tolerance and following test conditions per MIL-
STD 202, Method 305.
C0G, X7R & X5U
> 100pF with 1.0 vrms @ 1 kHz with 1.0 vrms
< 100pF with 1.0 vrms @ 1 MHz with 1.0 vrms
Dissipation Factor @ 25°C:
Same test conditions as capacitance.
C0G - 0.15% maximum
X7R - 2.5% maximum
X5U - 2.5% maximum
Insulation Resistance @25°C:
MIL-STD 202, Method 302
C0G & X7R:
100 gigohm or 1 gigohm x uF, whichever is less.
<500V test @ rated voltage, >1kV test @ 500V.
X5U:
10 gigohm or 100 megohm x uF, whichever is less.
<500V test @ rated voltage, >1kV test @ 500V.
Dielectric Withstanding Voltage:
MIL-STD 202, Method 301
<200V test @ 250% of rated voltage
500V to 1250V test @ 150% of rated voltage
>1251V test @ 120% of rated voltage
ENVIRONMENTAL
Vibration:
MIL-STD 202, Method 204, Condition D (20g)
Shock:
MIL-STD 202, Method 213, Condition I (100g)
Life Test:
MIL-STD 202, Method 108
<200V
C0G - 200% rated voltage @ +125°C
X7R - 200% rated voltage @ +125°C
>500V
C0G - rated voltage @ +125°C
X7R - rated voltage @ +125°C
X5U - rated voltage @ +85°C
Post Test Limits @ 25°C are:
Capacitance Change:
C0G (< 200V) - +3% or 0.25pF, whichever is greater.
C0G (> 500V) - +3% or 0.50pF, whichever is greater.
X7R - + 20% of initial value (2)
Dissipation Factor:
C0G - 0.25% maximum
X7R & X5U - 3.0% maximum
Insulation Resistance:
C0G & X7R:
100 gigohm or 1 gigohm x uF, whichever is less.
<500V test @ rated voltage, >1kV test @ 500V.
X5U:
10 gigohm or 100 megohm x uF, whichever is less.
<500V test @ rated voltage, >1kV test @ 500V.
Moisture Resistance:
MIL-STD 202, Method 106
Post Test Limits @ 25°C are:
Capacitance Change:
C0G (< 200V) - +3% or 0.25pF, whichever is greater.
C0G (> 500V) - +3% or 0.50pF, whichever is greater.
X7R - + 20% of initial value (2)
Dissipation Factor:
C0G - 0.25% maximum
X7R & X5U - 3.0% maximum
Insulation Resistance:
C0G & X7R:
100 gigohm or 1 gigohm x uF, whichever is less.
<500V test @ rated voltage, >1kV test @ 500V.
X5U:
10 gigohm or 100 megohm x uF, whichever is less.
<500V test @ rated voltage, >1kV test @ 500V.
Thermal Shock:
MIL-STD 202, Method 107, Condition A
C0G & X7R: -55°C to 125°C
X5U: -55°C to 85°C
(1) +53 PPM -30 PPM/ °C from +25°C to -55°C, + 60 PPM
below 10pF.
(2) X7R & X5U dielectrics exhibit aging characteristics;
therefore, it is highly recommended that capacitors be
deaged for 2 hours at 150°C and stabilized at room tem-
perature for 48 hours before capacitance measurements
are made.
© KEMET Electronics Corporation • PO Box 5928 • Greenville, SC 29606 • www.kemet.com
4
HIGH TEMPERATURE HIGH VOLTAGE
MILITARY & AEROSPACE
Avionics
Radar Systems
Telemetry, Data Tx/Rx
Control Systems
MEDICAL
.5 to 1.5 Tesla MR1 &
NM1 Tuning Coils
1 to 3 Tesla MR1 Gradient
Coils & Magnetic Rings
CT-Scanner
Medical MRI
X-Ray Generator
SEMICONDUCTOR
RF Tuning Networks
RF Power Supplies
Semiconductor Manufacturing
SECURITY
Handheld Scanners
Intruder Detection Systems
Luggage Scanners
Metal/Explosive Detector
OTHER
LCD Backlight Inverter
Electric Ballast for CFL
Electric Ballast for Fluorescent Lamp
Measurement Equipment
Microwave/Convection Ovens
POWER SUPPLY
HV Power Supply
Power Station Equipment
Power Supply for Air Conditioner, Washing Machine
Inverter Power Supply-AC
TELECOM
Base Station Power amps
Broadcasting Equipment
MODEM
DAA Modem
xDSL Modem
LAN, Router, HUB, Switches
RF Power Amplifiers
INDUSTRIAL
Oil Rigging, Down Hole, Mining
KEMET High Voltage Technical Summary
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
© KEMET Electronics Corporation • PO Box 5928 • Greenville, SC 29606 • www.kemet.com 5
Radial Conformally
Coated
Std
Mil-PRF-49467
Equivalent
Space Quality
Ceramic Surface Mount
Chip
Military
Leaded Chips
J or L lead
Disc
Disc Stack
C0G/X7R: 500 to
10k VDC
C0G/X7R: 600 to 5k
VDC
C0G/X7R: 500 to
10k VDC
C0G/X7R:
500 to 5k VDC
C0G/X7R:
500 to 10k VDC
C0G/X5U: 3k to
20k VDC,
X7R:3k to 50k VDC
C0G/X7R/X5U: 5k
to 20k VDC
C0G:12 pF - .330μF
X7R: 220 pF - 5.6 μF
C0G: 12 pF - .68 μF
X7R: 27 pF - .47 μF
C0G/X7R: 560 pF -
2.20μF
C0G: 12 pF- .10 μF
X7R: 270 pF -2.50 μF
C0G: 12 pF-.330 μF
X7R: 220 pF-5.6 uF
C0G: 1.2 pF-236 pF
X7R: 10 p -7400 pF
X5U: 80 pF-17300 pF
C0G: 1.2 pF-141 pF
X7R: 37 pF-4400 pF
X5U: 80 pF-10400 pF
C0G: 0.15% max
X7R: 2.5% max
C0G: 0.15% max
X7R: 2.5% max
C0G: 0.15% max
X7R: 2.5% max
C0G: 0.15% max
X7R: 2.5% max
C0G: 0.15% max
X7R: 2.5% max
C0G: 0.15% max
X7R: 2.5% max
X5U: 2.5% max
C0G: 0.15% max
X7R: 2.5% max
X5U: 2.5% max
C0G: -55°C to + 125°C
X7R: -55°C to + 125°C
C0G/X7R: -55°C to + 125°C
C0G/X7R: -55°C to + 125°C
C0G/X7R: -55°C to + 125°C
C0G/X7R: -55°C to + 125°C
C0G/X7R: -55°C to + 125°C
X5U: -55°C to + 85°C
C0G/X7R: -55°C to + 125°C
X5U: -55°C to + 85°C
Radial
Radial
Radial
Chip
Leaded Chip
J or L Lead
Disc
Disc Stack
5
6
7-10
11-13
14-16
17-19
20-21
22-23
24-
25
26-
27
28-
31
32-
33
34-
35
HIGH VOLTAGE
ELECTRICAL ENVIRONMENTAL MECHANICAL CATALOG
Voltage Capacitance Dissipation Operating Configuration See page(s)
Range Range Factor Temperature Range for detail
KEMET High Voltage Technical Summary
Hi Temp (HT/HP)
Hi Temp Hi Volt (HV)
Ceramic Cased Capacitor
Std 125°C
(SCR/SRR/SCA/SRA)
200°C
(ACR/ARR/ACA/ARA)
260°C
(TCR/TRR/TCA/TRA)
Hi Temp Hi Volt
(VCR/VRR)
100 to 200 VDC
500 to 4000 VDC
50 to 200 VDC
50 to 100 VDC
50 to 100 VDC
500 to 5000 VDC
-C0G: 22 pF-.100 μF
X7R:1000 pF-1.0μF
C0G: 390 pF-.015 μF
X7R:1400 pF- .270 μF
C0G: 1.0 pF- .12 μF
X7R:100 pF- 6.8 μF
C0G: 1.0 pF- .12 μF
X7R:100 pF- 3.3 μF
C0G: 1.0 pF- .12 μF
X7R:100 pF- 3.3 μF
C0G: 10 pF-.056 μF
X7R:330 pF-1.2μF
C0G 0.15%
X7R Type 2.0%
X7R 2.50%
C0G 0.15%
X7R Type 2.0%
X7R 2.50%
C0G 0.15%
X7R 2.50%
C0G 0.15%
X7R 2.50%
C0G 0.15%
X7R 2.50%
C0G 0.15%
X7R 2.50%
-55°C to + 200°C
-55°C to + 200°C
-55°C to + 125°C
-55°C to + 200°C
-55°C to + 260°C
-55°C to + 200°C
Axial/Radial
Radial
Axial/Radial
Axial/Radial
Axial/Radial
Radial
HIGH TEMPERATURE
© KEMET Electronics Corporation • PO Box 5928 • Greenville, SC 29606 • www.kemet.com
6
Features Ultra Stable Semi-Stable Semi-Stable Temp/Volt
High Voltage Hi-Temp Dependent
Dielectric Type C0G (NP0) X7R X7R type X5U
Temperature Coefficient 0 ±30ppm/ºC ±15% +15/-40% +22-56%
Operating Temp. Range -55 to +200ºC -55 to +125ºC -55 to +200ºC -55 to +125ºC
Dissipation Factor 0.1% max. 2.5% max. 2.0% max. 2.5% max.
Aging Rate None -2.0% max/dec. hour -2.0% max/dec. hour -2.0% max/dec. hour
Voltage Range 25 to 20k VDC 50 to 50k VDC 25 to 4k VDC Up to 20K VDC
Standard Tolerance J, K, M K, M, P, Z K, M, P, Z M, P, Z
Coefficient of Thermal 9 X 10-6 IN/IN ºC 11 X 10-6 IN/IN ºC 11 X 10-6 IN/IN ºC 11 X 10-6 IN/IN ºC
Expansion @ 25ºC
DIELECTRIC COMPARISONS
TYPICAL INSULATION RESISTANCE VS. TEMP (C°)
FOR C0G, NP0 & X7R DIELECTRICS
Technical Summary
25 75 125 175 225 275 325
10.00
100.00
1,000.00
10,000.00
Ohm-Farads
Temp (ºC)
© KEMET Electronics Corporation • PO Box 5928 • Greenville, SC 29606 • www.kemet.com 7
High Temperature (+200°C)
Axial and Radial Ceramic Capacitors
HT/HP Series
NOTE:
Other tolerances, higher capacitance values, voltages,
or special package configurations are available upon
request.
Style Sizes in Inches (mm) max Lead Spacing
±0.030 (S)
Length (L) Width (W) Thickness (T)
HT05 .200 (5.08) .200 (5.08) .100 (2.54) .100 (2.54)
HT55 .200 (5.08) .200 (5.08) .100 (2.54) .200 (5.08)
HT06 .300 (7.62) .300 (7.62) .150 (3.81) .200 (5.08)
HT08 .500 (12.70) .500 (12.70) .250 (6.35) .400 (10.16)
HT09 .700 (17.78) .400 (10.16) .200 (5.08) .500 (12.70)
Style Sizes in Inches (mm) max
Length (L) Diameter (D)
HT11 .170 (4.32) .100 (2.54)
HT13 .260 (6.60) .135 (3.43)
HT14 .400 (10.16) .155 (3.94)
HT15 .500 (12.70) .200 (5.08)
HT16 .750 (19.05) .375 (9.52)
DIMENSIONS
Molded (HT) and Conformal Coated (HP), Radial Lead Types Tubular Case, Axial Lead Types
MARKING
(HT05, HT55, HT11)
472K
KEC
(All other sizes)
HT06AW472K
KEC
Date Code
For CONFORMAL COATED types, change style number to HPXX. HP dimensions will be reduced slightly.
LT
L
W
S
D
1.25
Min.
1.25
Min.
The HT/HP Series is used in robust applications
• Down Hole
• Industrial
• Harsh Environments
Where a Radial/Axial coated capacitor can
withstand high temperatures (200°C).
CAPACITOR OUTLINE DRAWING
PART NUMBER AND ORDERING INFORMATION
CAPACITANCE VALUE
First two digits are significant, last digit is
number of zeros, i.e., 472=4700pF
J=±5%
K=±10%
M=±20%
Other tolerance available upon request
LEAD MATERIAL
N = Nickel (std)
C = Solder Coated Copper Clad Steel
STYLE
HT=Molded
HP= Conformal Coated
VOLTAGE
A=25V
B=50V
C=100V
D=200V
DIELECTRIC
MATERIAL
B, W=X7R type
N=C0G (NP0)
HT06 A W 472 K N
TOLERANCE
FEATURES
© KEMET Electronics Corporation • PO Box 5928 • Greenville, SC 29606 • www.kemet.com
8
High Temperature (+200°C)
Axial and Radial Ceramic Capacitors
HT/HP Series
C0G & X7R DIELECTRIC
C0G RADIAL
STYLE HT/HP 05 HT/HP 55 HT/HP 06 HT/HP 08 HT/HP 09
Cap
LMAX .200 (5.08) .200 (5.08) .300 (7.62) .500 (12.70) .700 (17.78)
WMAX .200 (5.08) .200 (5.08) .300 (7.62) .500 (12.70) .400 (10.16)
TMAX .100 (2.54) .100 (2.54) .150 (3.81) .250 (6.35) .200 (5.08)
S± .030 .100 (2.54) .200 (5.08) .200 (5.08) .400 (10.16) .500 (12.70)
Lead Dia. .025 (.635) .025 (.635) .025 (.635) .025 (.635) .025 (.635)
Cap
Code
WVDC WVDC WVDC WVDC WVDC
50 100 200 50 100 200 50 100 200 50 100 200 50 100 200
22pF 220
27 270
33 330
39 390
47 470
56 560
68 680
82 820
100 101
120 121
150 151
180 181
220 221
270 271
330 331
390 391
470 471
560 561
680 681
820 821
1000 102
1200 122
1500 152
1800 182
2200 222
2700 272
3300 332
3900 392
4700 472
5600 562
6800 682
8200 822
.010 uF 103
0.012 123
0.015 153
0.018 183
0.022 223
0.027 273
0.033 333
0.039 393
0.047 473
0.056 563
0.068 683
0.082 823
0.10 104
0.12 124
X7R RADIAL
STYLE HT/HP 05 HT/HP 55 HT/HP 06 HT/HP 08 HT/HP 09
Cap
LMAX .200 (5.08) .200 (5.08) .300 (7.62) .500 (12.70) .700 (17.78)
W MAX .200 (5.08) .200 (5.08) .300 (7.62) .500 (12.70) .400 (10.16)
TMAX .100 (2.54) .100 (2.54) .150 (3.81) .250 (6.35) .200 (5.08)
S± .030 .100 (2.54) .200 (5.08) .200 (5.08) .400 (10.16) .500 (12.70)
Lead Dia. .025 (.635) .025 (.635) .025 (.635) .025 (.635) .025 (.635)
Cap
Code
WVDC WVDC WVDC WVDC WVDC
50 100 200 50 100 200 50 100 200 50 100 200 50 100 200
1000pF 102
1200 122
1500 152
1800 182
2200 222
2700 272
3300 332
3900 392
4700 472
5600 562
6800 682
8200 822
.010 uF 103
0.012 123
0.015 153
0.018 183
0.022 223
0.027 273
0.033 333
0.039 393
0.047 473
0.056 563
0.068 683
0.082 823
0.10 104
0.12 124
0.15 154
0.18 184
0.22 224
0.27 274
0.33 334
0.39 394
0.47 474
0.56 564
0.68 684
0.82 824
1.0 105
1.2 125
1.5 155
1.8 185
2.2 225
2.7 275
3.3 335
3.9 395
4.7 475
5.6 565
© KEMET Electronics Corporation • PO Box 5928 • Greenville, SC 29606 • www.kemet.com 9
High Temperature (+200°C)
Axial and Radial Ceramic Capacitors
HT/HP Series
C0G & X7R DIELECTRIC
COG AXIAL
STYLE HT/HP 11 HT/HP 13 HT/HP 14 HT/HP 15 HT/HP 16
Cap
LMAX .170 (4.32) .260 (6.60) .400 (10.16) .500 (12.70) .750 (19.05)
DMAX .100 (2.54) .135 (3.43) .155 (3.94) .200 (5.08) .375 (9.52)
Lead Dia. .025 (.635) .025 (.635) .025 (.635) .025 (.635) .025 (.635)
Cap
Code
WVDC WVDC WVDC WVDC WVDC
50 100 200 50 100 200 50 100 200 50 100 200 50 100 200
5.6pF 569
6.8 689
8.2 829
10 100
12 120
15 150
18 180
22 220
27 270
33 330
39 390
47 470
56 560
68 680
82 820
100 101
120 121
150 151
180 181
220 221
270 271
330 331
390 391
470 471
560 561
680 681
820 821
1000 102
1200 122
1500 152
1800 182
2200 222
2700 272
3300 332
3900 392
4700 472
5600 562
6800 682
8200 822
.010 uF 103
0.012 123
0.015 153
0.018 183
0.022 223
0.027 273
0.033 333
0.039 393
0.047 473
0.056 563
0.068 683
0.082 823
0.10 104
X7R AXIAL
STYLE HT/HP 11 HT/HP 13 HT/HP 14 HT/HP 15 HT/HP 16
Cap
LMAX .170 (4.32) .260 (6.60) .400 (10.16) .500 (12.70) .750 (19.05)
DMAX .100 (2.54) .135 (3.43) .155 (3.94) .200 (5.08) .375 (9.52)
Lead Dia. .025 (.635) .025 (.635) .025 (.635) .025 (.635) .025 (.635)
Cap
Code
WVDC WVDC WVDC WVDC WVDC
50 100 200 50 100 200 50 100 200 50 100 200 50 100 200
100pF 101
120 121
150 151
180 181
220 221
270 271
330 331
390 391
470 471
560 561
680 681
820 821
1000 102
1200 122
1500 152
1800 182
2200 222
2700 272
3300 332
3900 392
4700 472
5600 562
6800 682
8200 822
.010uF 103
0.012 123
0.015 153
0.018 183
0.022 223
0.027 273
0.033 333
0.039 393
0.047 473
0.056 563
0.068 683
0.082 823
0.1 104
0.12 124
0.15 154
0.18 184
0.22 224
0.27 274
0.33 334
0.39 394
0.47 474
0.56 564
0.68 684
0.82 824
1.0 105
1.2 125
1.5 155
1.8 185
2.2 225
2.7 275
© KEMET Electronics Corporation • PO Box 5928 • Greenville, SC 29606 • www.kemet.com
1010
Style Sizes in Inches (mm) max. Lead Spacing
±0.030 (S)
Length (L) Width (W) Thickness (T)
HV10 .250 (6.35) .220 (5.59) .150 (3.81) .170 (4.32)
HV11 .320 (8.13) .300 (7.62) .250 (6.35) .200 (5.08)
HV12 .420 (10.67) .400 (10.16) .250 (6.35) .300 (7.62)
HV13 .520 (13.21) .500 (12.70) .300 (7.62) .400 (10.16)
HV14 .620 (15.75) .500 (12.70) .300 (7.62) .500 (12.70)
HV15 .720 (18.29) .700 (17.78) .300 (7.62) .600 (15.24)
HV16 .820 (20.83) .700 (17.78) .350 (8.89) .700 (17.78)
DIMENSIONS
LT
W
S
1.25
Min.
High Temperature (+200°C), High Voltage
Radial Ceramic Capacitors
HV Series
NOTE:
Other tolerances, higher capacitance values, voltages, or special
package configurations are available upon request.
MARKING
(HV10, HV11)
472M
KEC
Date Code
(All other sizes)
HV12B472M
1kV
KEC
Date Code
The HV series not only withstands high temperatures
(200°C) , but also offers high voltage (500-4000 VDC)
To be used in robust applications
• Down Hole
• Industrial
• Harsh Environments
PART NUMBER AND ORDERING INFORMATION
CAPACITANCE VALUE
First two digits are significant, last digit is
number of zeros, i.e., 472=4700pF
J=±5%
K=±10%
M=±20%
Other tolerances available upon request
LEAD MATERIAL
N = Nickel (std)
C = Solder Coated Copper Clad Steel
STYLE
HV12, etc
VOLTAGE
05=500V
10=1000V
20=2000V
30=3000V
40=4000V
TEMPERATURE
COEFFICIENT
B, W=X7R type
N=C0G (NP0)
10 HV12 B 472 K N M
TOLERANCE
FEATURES CAPACITOR OUTLINE DRAWING
GROUP A SCREENING*
Add to part number if required
*MIL-PRF-49467 (Subgroup 1) except Corona
© KEMET Electronics Corporation • PO Box 5928 • Greenville, SC 29606 • www.kemet.com 11
High Temperature (+200°C), High Voltage
Radial Ceramic Capacitors
HV Series
C0G DIELECTRIC
STYLE HV10 HV11 HV12 HV13 HV14 HV15 HV16
Cap
LMAX .250 (6.35) .320 (8.13) .420 (10.67) .520 (13.21) .620 (15.75) .720 (18.29) .820 (20.83)
WMAX .220 (5.59) .300 (7.62) .400 (10.16) .500 (12.70) .500 (12.70) .700 (17.78) .700 (17.78)
TMAX .150 (3.81) .250 (6.35) .250 (6.35) .300 (7.62) .300 (7.62) .300 (7.62) .350 (8.89)
S± .030 .170 (4.32) .200 (5.08) .300 (7.62) .400 (10.16) .500 (12.70) .600 (15.24) .700 (17.78)
Lead Dia.
+0.004/-.002 .025 (.635) .025 (.635) .025 (.635) .025 (.635) .025 (.635) .025 (.635) .025 (.635)
Cap
Code
WVDC WVDC WVDC WVDC WVDC WVDC WVDC
500 1k 2k 500 1k 2k 3k 500 1k 2k 3k 500 1k 2k 3k 500 1k 2k 3k 4k 500 1k 2k 3k 4k 500 1k 2k 3k 4k
12pF 120
15 150
18 180
22 220
27 270
33 330
39 390
47 470
56 560
68 680
82 820
100 101
120 121
150 151
180 181
220 221
270 271
330 331
390 391
470 471
560 561
680 681
820 821
1000 102
1200 122
1500 152
1800 182
2200 222
2700 272
3300 332
3900 392
4700 472
5600 562
6800 682
8200 822
0.01uF 103
0.012 123
0.015 153
© KEMET Electronics Corporation • PO Box 5928 • Greenville, SC 29606 • www.kemet.com
12
X7R DIELECTRIC
High Temperature (+200°C), High Voltage
Radial Ceramic Capacitors
HV Series
STYLE HV10 HV11 HV12 HV13 HV14 HV15 HV16
Cap
LMAX .250 (6.35) .320 (8.13) .420 (10.67) .520 (13.21) .620 (15.75) .720 (18.29) .820 (20.83)
WMAX .220 (5.59) .300 (7.62) .400 (10.16) .500 (12.70) .500 (12.70) .700 (17.78) .700 (17.78)
TMAX .150 (3.81) .250 (6.35) .250 (6.35) .300 (7.62) .300 (7.62) .300 (7.62) .350 (8.89)
S± .030 .170 (4.32) .200 (5.08) .300 (7.62) .400 (10.16) .500 (12.70) .600 (15.24) .700 (17.78)
Lead Dia.
+0.004/-.002 .025 (.635) .025 (.635) .025 (.635) .025 (.635) .025 (.635) .025 (.635) .025 (.635)
Cap
Code
WVDC WVDC WVDC WVDC WVDC WVDC WVDC
500 1k 2k 500 1k 2k 500 1k 2k 500 1k 2k 3k 500 1k 2k 3k 4k 500 1k 2k 3k 4k 500 1k 2k 3k 4k
270pF 271
330 331
390 391
470 471
560 561
680 681
820 821
1000 102
1200 122
1500 152
1800 182
2200 222
2700 272
3300 332
3900 392
4700 472
5600 562
6800 682
8200 822
0.01uF 103
0.012 123
0.015 153
0.018 183
0.022 223
0.027 273
0.033 333
0.039 393
0.047 473
0.056 563
0.068 683
0.082 823
0.10 104
0.12 124
0.15 154
0.18 184
0.22 224
0.27 274
0.33 334
0.39 394
0.47 474
© KEMET Electronics Corporation • PO Box 5928 • Greenville, SC 29606 • www.kemet.com 13
C3 GENERAL INFORMATION
Monolithic ceramic capacitors are capable of withstanding and operating at temperatures up to +260°C when properly
designed and manufactured for this application. A design has been developed which is ideal for operation at these
high temperatures. This design is a Ceramic Cased Capacitor (C3) as described in PATENT #4,931,899.
The advantages of the C3construction at 125°C, 200°C and 260°C are:
Radial C3- One Lead Removed Radial C3- Capacitor Internal Construction
Axial C3- One Lead Removed
Ceramic Case
Solder Seal
Internal
Electrodes
Lead with
Dumet Head
Internal
Electrodes
High Temperature
Ceramic Cased Capacitors C3
• Uniform coefficient of linear expansion eliminates chip cracking during thermal shock.
• No "pull-away" of epoxy potting from epoxy case at elevated temperatures.
• Resistant to moisture penetration.
• Superior volumetric efficiency
© KEMET Electronics Corporation • PO Box 5928 • Greenville, SC 29606 • www.kemet.com
14
C0G (NP0) capacitors which exhibit little change in capa-
citance with variations in temperature, are used in RF
oscillators, precision timing circuits, wave filters and
other circuits requiring a predictable linear temperature
coefficient.
PART NUMBER AND ORDERING INFORMATION
TEST LEVEL
S = KEMET standard screening
A = MIL-PRF-20, Group A Test (COG)
A = MIL-PRF-39014, Group A Test (X7R)
X = Special
LEAD MATERIALS
G = Gold plated copper clad steel
W = Solder coated copper
clad steel
CAPACITANCE TOLERANCES
J = ±5%
K = ±10%
M = ±20%
Other tolerances available upon request
CAPACITANCE CODE
3 Digit code system expressed in
picofarads (pF)
103 = 10,000pF
151 = 150pF
6R8 = 6.8pF
PRODUCT FAMILY
S = Standard Axial and
Radial Capacitors
TEMP. CHARACTERISTIC
C = C0G (NP0)
R = X7R (BX)
LEAD CONFIGURATION
A = Axial
R = Radial
STYLE
Case Size
See data sheet for detail dimensions
S C R 05 B 103 K G S
VOLTAGE RATING
B = 50vdc
D = 100vdc
F = 200vdc
S = Special
MARKING
Manufacturer’s ID KEC
Capacitance 106J
Voltage 50V
Date Code 123
BX and X7R capacitors are used in coupling circuits (IF and
RF); for bypassing and decoupling in computers and stereo
sytems; power supply line filtering and frequency discrimina-
tion.
C0G X7R
High Temperature Standard (+125°C)
Axial and Radial Ceramic Cased Capacitors (C3)
SCR/SRR/SCA/SRA Series
INSTALLATION:
Parts should be soldered using a heat sink between the soldering point and the part using a soldering iron rated between 18-
30 watts. Soldering temperature should not exceed +300°C. For wave soldering, the parts should be slowly heated to +150°C
and, after soldering, be allowed to cool down slowly to +90°C to preclude thermal shocking of the parts.
Note: Solderability testing is not required
for gold leaded parts.
© KEMET Electronics Corporation • PO Box 5928 • Greenville, SC 29606 • www.kemet.com 15
High Temperature Standard (+125°C)
Axial and Radial Ceramic Cased Capacitors (C3)
SCR/SCA Series
AXIAL
All Dimensions
in Inches (mm)
RADIAL
All Dimensions
in Inches (mm)
C0G DIELECTRIC
AXIAL
STYLE 16 25 39 50 69
Cap
LMAX .170 (4.32) .270 (6. 86) .400 (10.16) .520 (13.21) .720 (18.29)
W MAX .080 (2.03) .100 (2.54) .150 (3.81) .265 (6.73) .370 (9.40)
TMAX .080 (2.03) .100 (2.54) .150 (3.81) .160 (4.06) .160 (4.06)
S--- --- --- --- ---
d.020 ± .002
(.508 ± .051)
.020 ± .002
(.508 ± .051)
.025 ± .002
(.635 ± .051)
.025 ± .002
(.635 ± .051)
.025 ± .002
(.635 ± .051)
Cap
Code
WVDC WVDC WVDC WVDC WVDC
50 100 200 50 100 200 50 100 200 50 100 200 50 100 200
5.6pF 569
6.8 689
8.2 829
10 100
12 120
15 150
18 180
22 220
27 270
33 330
39 390
47 470
56 560
68 680
82 820
100 101
120 121
150 151
180 181
220 221
270 271
330 331
390 391
470 471
560 561
680 681
820 821
1000 102
1200 122
1500 152
1800 182
2200 222
2700 272
3300 332
3900 392
4700 472
5600 562
6800 682
8200 822
0.01 μF 103
0.012 123
0.015 153
0.018 183
0.022 223
0.027 273
0.033 333
0.039 393
0.047 473
0.056 563
0.068 683
0.082 823
0.10 104
0.12 124
0.15 154
0.18 184
0.22 224
RADIAL
05 06 07 08 09
.200 (5.08) .300 (7.62) .300 (7.62) .500 (12.70) .500 (12.70)
.200 (5.08) .300 (7.62) .300 (7.62) .500 (12.70) .500 (12.70)
.100 (2.54) .100 (2.54) .150 (3.81) .100 (2.54) .150 (3.81)
.200 ± .015
(5.08 ±.38)
.200 ± .015
(5.08 ±.38)
.200 ± .015
(5.08 ±.38)
.400 ± .015
(10.16 ± .38)
.400 ± .015
(10.16 ± .38)
.020 ± .002
(.508 ± .051)
.020 ± .002
(.508 ± .051)
.020 ± .002
(.508 ± .051)
.025 ± .002
(.635 ± .051)
.025 ± .002
(.635 ± .051)
WVDC WVDC WVDC WVDC WVDC
50 100 200 50 100 200 50 100 200 50 100 200 50 100 200
S
© KEMET Electronics Corporation • PO Box 5928 • Greenville, SC 29606 • www.kemet.com
16
High Temperature Standard (+125°C)
Axial and Radial Ceramic Cased Capacitors (C3)
SRR/SRA Series
AXIAL
All Dimensions
in Inches (mm)
RADIAL
All Dimensions
in Inches (mm)
X7R DIELECTRIC
AXIAL
STYLE 16 25 39 50 69
Cap
LMAX .170 (4.32) .270 (6. 86) .400 (10.16) .520 (13.21) .720 (18.29)
WMAX .080 (2.03) .100 (2.54) .150 (3.81) .265 (6.73) .370 (9.40)
TMAX .080 (2.03) .100 (2.54) .150 (3.81) .160 (4.06) .160 (4.06)
S --- --- --- --- ---
d.020 ± .002
(.508 ± .051)
.020 ± .002
(.508 ± .051)
.025 ± .002
(.635 ± .051)
.025 ± .002
(.635 ± .051)
.025 ± .002
(.635 ± .051)
Cap
Code
WVDC WVDC WVDC WVDC WVDC
50 100 200 50 100 200 50 100 200 50 100 200 50 100 200
100pF 101
120 121
150 151
180 181
220 221
270 271
330 331
390 391
470 471
560 561
680 681
820 821
1000 102
1200 122
1500 152
1800 182
2200 222
2700 272
3300 332
3900 392
4700 472
5600 562
6800 682
8200 822
0.01 μF 103
0.012 123
0.015 153
0.018 183
0.022 223
0.027 273
0.033 333
0.039 393
0.047 473
0.056 563
0.068 683
0.082 823
0.10 104
0.12 124
0.15 154
0.18 184
0.22 224
0.27 274
0.33 334
0.39 394
0.47 474
0.56 564
0.68 684
0.82 824
1.0 105
1.2 125
1.5 155
1.8 185
2.2 225
2.7 275
3.3 335
3.9 395
4.7 475
5.6 565
6.8 685
RADIAL
05 06 07 08 09
.200 (5.08) .300 (7.62) .300 (7.62) .500 (12.70) .500 (12.70)
.200 (5.08) .300 (7.62) .300 (7.62) .500 (12.70) .500 (12.70)
.100 (2.54) .100 (2.54) .150 (3.81) .100 (2.54) .150 (3.81)
.200 ± .015
(5.08 ±.38)
.200 ± .015
(5.08 ±.38)
.200 ± .015
(5.08 ±.38)
.400 ± .015
(10.16 + .38)
.400 ± .015
(10.16 + .38)
.020 ± .002
(.508 ± .051)
.020 ± .002
(.508 ± .051)
.020 ± .002
(.508 ± .051)
.025 ± .002
(.635 ± .051)
.025 ± .002
(.635 ± .051)
WVDC WVDC WVDC WVDC WVDC
50 100 200 50 100 200 50 100 200 50 100 200 50 100 200
S
© KEMET Electronics Corporation • PO Box 5928 • Greenville, SC 29606 • www.kemet.com 17
LEAD MATERIALS
W = Solder Coated Copper clad steel
G = Gold plated copper clad steel
CAPACITANCE TOLERANCES
J = ±5%
M = ±20%
K = ±10%
Other Tolerances available upon request
CAPACITANCE CODE
3 Digit code system expressed in
picofarads (pF)
103 = 10,000pF
151 = 150pF
6R8 = 6.8pF
PRODUCT FAMILY
A = High Temperature
Axial and Radial Capacitors
TEMP. CHARACTERISTIC
C = C0G (NP0)/BP
R = X7R (BX)
LEAD CONFIGURATION
A = Axial
R = Radial
STYLE
Case Size.
See data sheet for detail dimensions
A C R 06 B 103 K G S
VOLTAGE RATING
B = 50vdc
D = 100vdc
S = Special
TEST LEVEL
S = KEMET standard screening
A = MIL-PRF-39014, Group A Test
A = MIL-PRF-20 (COG)
X = Special
C0G (NPO) capacitors, which exhibit little change in
capacitance with variations in temperature, are used in RF
oscillators, precision timing circuits, wave filters, and other
circuits requiring a predictable linear temperature coeffi-
cient.
Specially formulated X7R ceramic materials result in a reten-
tion of 40% of the +25°C capacitance. Dissipation factor drops
from 1.25% at +25°C to 0.1% at +200°C. At +120°C the
ceramic undergoes a transformation (crystalline inversion)
resulting in the material changing from ferroelectric to para-
electric - no piezoelectric behavior.
C0G X7R
PART NUMBER AND ORDERING INFORMATION
MARKING
Manufacturer’s ID KEC
Capacitance 106J
Voltage 50V
Date Code 123
High temperature ceramic cased capacitors, with a new, unique design concept, are ideally suited for continuous operation
up to +200°C. Problems associated with epoxy cased/epoxy potted capacitors, such as material deterioration, cracks in
cases and potted areas, are nonexistent, even at +200°C.
High Temperature Standard (+200°C)
Axial and Radial Ceramic Cased Capacitors (C3)
ACR/ARR/ACA/ARA Series
Typical applications include oil well logging (down hole), jet engine controls and geophysical pressure probes.
INSTALLATION:
Parts should be soldered using a heat sink between the soldering point and the part using a soldering iron rated
between18-30 watts. Soldering temperature should not exceed +300°C.
© KEMET Electronics Corporation • PO Box 5928 • Greenville, SC 29606 • www.kemet.com
18
AXIAL
All Dimensions
in Inches (mm)
RADIAL
All Dimensions
in Inches (mm)
High Temperature Standard (+200°C)
Axial and Radial Ceramic Cased Capacitors (C3)
ACR/ACA Series
C0G DIELECTRIC
H
L
AXIAL RADIAL
STYLE 16 25 39 50 69 05 06 07 08 09
Cap
LMAX .170 (4.32) .270 (6. 86) .400 (10.16) .520 (13.21) .720 (18.29) .200 (5.08) .300 (7.62) .300 (7.62) .500 (12.70) .500 (12.70)
WMAX .080 (2.03) .100 (2.54) .150 (3.81) .265 (6.73) .370 (9.40) .200 (5.08) .300 (7.62) .300 (7.62) .500 (12.70) .500 (12.70)
TMAX .080 (2.03) .100 (2.54) .150 (3.81) .160 (4.06) .160 (4.06) .100 (2.54) .100 (2.54) .150 (3.81) .100 (2.54) .150 (3.81)
S--- --- --- --- --- .200 ± .015
(5.08 ±.38)
.200 ± .015
(5.08 ±.38)
.200 ± .015
(5.08 ±.38)
.400 ± .015
(10.16 + .38)
.400 ± .015
(10.16 +.38)
d.020 ± .002
(.508 ±.051)
.020 ± .002
(.508 ±.051)
.025 ± .002
(.635 ±.051)
.025 ± .002
(.635 ±.051)
.025 ± .002
(.635 ± .051)
.020 ± .002
(.508 ±.051)
.020 ± .002
(.508 ±.051)
.020 ± .002
(.508 ± .051)
.025 ± .002
(.635 ± .051)
.025 ± .002
(.635 ±.051)
Cap
Code
WVDC WVDC WVDC WVDC WVDC WVDC WVDC WVDC WVDC WVDC
50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100
5.6pF 569
6.8 689
8.2 829
10 100
12 120
15 150
18 180
22 220
27 270
33 330
39 390
47 470
56 560
68 680
82 820
100 101
120 121
150 151
180 181
220 221
270 271
330 331
390 391
470 471
560 561
680 681
820 821
1000 102
1200 122
1500 152
1800 182
2200 222
2700 272
3300 332
3900 392
4700 472
5600 562
6800 682
8200 822
0.01 μF 103
0.012 123
0.015 153
0.018 183
0.022 223
0.027 273
0.033 333
0.039 393
0.047 473
0.056 563
0.068 683
0.082 823
0.10 104
0.12 124
0.15 154
S
© KEMET Electronics Corporation • PO Box 5928 • Greenville, SC 29606 • www.kemet.com 19
High Temperature Standard (+200°C)
Axial and Radial Ceramic Cased Capacitors (C3)
ARR/ARA Series
AXIAL
All Dimensions
in Inches (mm)
RADIAL
All Dimensions
in Inches (mm)
X7R DIELECTRIC
AXIAL RADIAL
STYLE 16 25 39 50 69 05 06 07 08 09
Cap
LMAX .170 (4.32) .270 (6. 86) .400 (10.16) .520 (13.21) .720 (18.29) .200 (5.08) .300 (7.62) .300 (7.62) .500 (12.70) .500 (12.70)
W MAX .080 (2.03) .100 (2.54) .150 (3.81) .265 (6.73) .370 (9.40) .200 (5.08) .300 (7.62) .300 (7.62) .500 (12.70) .500 (12.70)
TMAX .080 (2.03) .100 (2.54) .150 (3.81) .160 (4.06) .160 (4.06) .100 (2.54) .100 (2.54) .150 (3.81) .100 (2.54) .150 (3.81)
S--- --- --- --- --- .200 ± .015
(5.08 ±.38)
.200 ± .015
(5.08 ±.38)
.200 ± .015
(5.08 ±.38)
.400 ± .015
(10.16 +.38)
400 ± .015
(10.16 +.38)
d.020 ± .002
(.508 ± .051)
.020 ± .002
(.508 ± .051)
.025 ± .002
(.635 ± .051)
.025 ± .002
(.635 ± .051)
.025 ± .002
(.635 ± .051)
.020 ± .002
(.508 ± .051)
.020 ± .002
(.508 ± .051)
.020 ± .002
(.508 ± .051)
.025 ± .002
(.635 ± .051)
.025 ± .002
(.635 ± .051)
Cap
Code
WVDC WVDC WVDC WVDC WVDC WVDC WVDC WVDC WVDC WVDC
50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100
100pF 101
120 121
150 151
180 181
220 221
270 271
330 331
390 391
470 471
560 561
680 681
820 821
1000 102
1200 122
1500 152
1800 182
2200 222
2700 272
3300 332
3900 392
4700 472
5600 562
6800 682
8200 822
0.01 μF 103
0.012 123
0.015 153
0.018 183
0.022 223
0.027 273
0.033 333
0.039 393
0.047 473
0.056 563
0.068 683
0.082 823
0.10 104
0.12 124
0.15 154
0.18 184
0.22 224
0.27 274
0.33 334
0.39 394
0.47 474
0.56 564
0.68 684
0.82 824
1.0 105
1.2 125
1.5 155
1.8 185
2.2 225
2.7 275
3.3 335
3.9 395
S
© KEMET Electronics Corporation • PO Box 5928 • Greenville, SC 29606 • www.kemet.com
20
TEST LEVEL
S = KEMET standard screening
A = MIL-PRF-20, Group A Test (COG)
A = MIL-PRF-39014 (X7R)
X = Special
LEAD MATERIALS
G = Gold Plated Copper Clad Steel
W = Solder Coated Copper Clad Steel
CAPACITANCE TOLERANCES
J = ±5%
M = ±20%
K = ±10%
Other Tolerances available upon request
CAPACITANCE CODE
3 Digit code system expressed in
picofarads (pF)
103 = 10,000pF
151 = 150pF
6R8 = 6.8pF
PRODUCT FAMILY
T = High Temperature Axial
and Radial Capacitors
TEMP. CHARACTERISTIC
260°C
C = C0G (NP0)/BP
R = X7R (BX)
LEAD CONFIGURATION
A = Axial
R = Radial
STYLE
Case Size.
See data sheet for detail dimensions
T C R 06 B 103 K G S
VOLTAGE RATING
B = 50vdc
D = 100vdc
MARKING EXAMPLE
Manufacturer’s ID KEC
Capacitance 106J
Voltage 50V
Date Code 123
Red dot = +260°C •
High Temperature (+260°C)
Axial and Radial Ceramic Cased Capacitors (C3)
TCR/TRR/TCA/TRA Series
C0G (NP0) capacitors, which exhibit little change in capa-
citance with variations in temperature, are used in RF
oscillators, precision timing circuits, wave filters, and other
circuits requiring a predictable linear temperature coeffi-
cient.
Conventional X7R materials lose up to 75% of the +25°C
capacitance. Dissipation factor drops from 1.25% at +25°C to
0.2% at +260°C. At +120°C the ceramic undergoes a transfor-
mation (crystalline inversion) resulting in the material changing
from ferroelectric to paraelectric - no piezoelectric behavior.
C0G X7R
PART NUMBER AND ORDERING INFORMATION
High temperature ceramic cased capacitors, with a new, unique design concept, are ideally suited for continuous operation
up to +260°C. Problems associated with epoxy cased/epoxy potted capacitors, such as material deterioration, cracks in
cases and potted areas, are nonexistent, even at +260°C.
INSTALLATION:
Parts should be soldered using a heat sink between the soldering point and the part using a soldering iron rated 18-30
watts. Remove all traces of flux or other contamination resulting from the soldering operation. An intermittent conducting
path between the leads, at high voltage, could cause breakdown. Soldering temperature should not exceed +300°C.
Typical applications include oil well logging (down hole), jet engine controls and geophysical pressure probes.
© KEMET Electronics Corporation • PO Box 5928 • Greenville, SC 29606 • www.kemet.com 21
High Temperature (+260°C)
Axial and Radial Ceramic Cased Capacitors (C3)
TCR/TCA Series
AXIAL
All Dimensions
in Inches (mm)
RADIAL
All Dimensions
in Inches (mm)
C0G DIELECTRIC
AXIAL RADIAL
STYLE 16 25 39 50 69 05 06 07 08 09
Cap
LMAX .170 (4.32) .270 (6. 86) .400 (10.16) .520 (13.21) .720 (18.29) .200 (5.08) .300 (7.62) .300 (7.62) .500 (12.70) .500 (12.70)
WMAX .080 (2.03) .100 (2.54) .150 (3.81) .265 (6.73) .370 (9.40) .200 (5.08) .300 (7.62) .300 (7.62) .500 (12.70) .500 (12.70)
TMAX .080 (2.03) .100 (2.54) .150 (3.81) .160 (4.06) .160 (4.06) .100 (2.54) .100 (2.54) .150 (3.81) .100 (2.54) .150 (3.81)
S--- --- --- --- --- .200 ± .015
(5.08 ±.38)
.200 ± .015
(5.08 ±.38)
.200 ± .015
(5.08 ±.38)
.400 ± .015
(10.16 + .38)
.400 ± .015
(10.16 + .38)
d.020 ± .002
(.508 ± .051)
.020 ± .002
(.508 ± .051)
.025 ± .002
(.635 ± .051)
.025 ± .002
(.635 ± .051)
.025 ± .002
(.635 ± .051)
.020 ± .002
(.508 ± .051)
.020 ± .002
(.508 ± .051)
.020 ± .002
(.508 ± .051)
.025 ± .002
(.635 ± .051)
.025 ± .002
(.635 ± .051)
Cap
Code
WVDC WVDC WVDC WVDC WVDC WVDC WVDC WVDC WVDC WVDC
50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100
5.6pF 569
6.8 689
8.2 829
10 100
12 120
15 150
18 180
22 220
27 270
33 330
39 390
47 470
56 560
68 680
82 820
100 101
120 121
150 151
180 181
220 221
270 271
330 331
390 391
470 471
560 561
680 681
820 821
1000 102
1200 122
1500 152
1800 182
2200 222
2700 272
3300 332
3900 392
4700 472
5600 562
6800 682
8200 822
0.01 μF 103
0.012 123
0.015 153
0.018 183
0.022 223
0.027 273
0.033 333
0.039 393
0.047 473
0.056 563
0.068 683
0.082 823
0.10 104
0.12 124
0.15 154
S
© KEMET Electronics Corporation • PO Box 5928 • Greenville, SC 29606 • www.kemet.com
22
High Temperature (+260°C)
Axial and Radial Ceramic Cased Capacitors (C3)
TRR/TRA Series
AXIAL
All Dimensions
in Inches (mm)
RADIAL
All Dimensions
in Inches (mm)
X7R DIELECTRIC
AXIAL
STYLE 16 25 39 50 69
Cap
LMAX .170 (4.32) .270 (6. 86) .400 (10.16) .520 (13.21) .720 (18.29)
WMAX .080 (2.03) .100 (2.54) .150 (3.81) .265 (6.73) .370 (9.40)
TMAX .080 (2.03) .100 (2.54) .150 (3.81) .160 (4.06) .160 (4.06)
S --- --- --- --- ---
d.020 ± .002
(.508 ± .051)
.020 ± .002
(.508 ± .051)
.025 ± .002
(.635 ± .051)
.025 ± .002
(.635 ± .051)
.025 ± .002
(.635 ± .051)
Cap
Code
WVDC WVDC WVDC WVDC WVDC
50 100 50 100 50 100 50 100 50 100
100pF 101
120 121
150 151
180 181
220 221
270 271
330 331
390 391
470 471
560 561
680 681
820 821
1000 102
1200 122
1500 152
1800 182
2200 222
2700 272
3300 332
3900 392
4700 472
5600 562
6800 682
8200 822
0.01 μF 103
0.012 123
0.015 153
0.018 183
0.022 223
0.027 273
0.033 333
0.039 393
0.047 473
0.056 563
0.068 683
0.082 823
0.10 104
0.12 124
0.15 154
0.18 184
0.22 224
0.27 274
0.33 334
0.39 394
0.47 474
0.56 564
0.68 684
0.82 824
1.0 105
1.2 125
1.5 155
1.8 185
2.0 205
2.2 225
2.7 275
3.3 335
3.9 395
RADIAL
05 06 07 08 09
.200 (5.08) .300 (7.62) .300 (7.62) .500 (12.70) .500 (12.70)
.200 (5.08) .300 (7.62) .300 (7.62) .500 (12.70) .500 (12.70)
.100 (2.54) .100 (2.54) .150 (3.81) .100 (2.54) .150 (3.81)
.200 ± .015
(5.08 ±.38)
.200 ± .015
(5.08 ±.38)
.200 ± .015
(5.08 ±.38)
.400 ± .015
(10.16 + .38)
.400 ± .015
(10.16 + .38)
.020 ± .002
(.508 ± .051)
.020 ± .002
(.508 ± .051)
.020 ± .002
(.508 ± .051)
.025 ± .002
(.635 ± .051)
.025 ± .002
(.635 ± .051)
WVDC WVDC WVDC WVDC WVDC
50 100 50 100 50 100 50 100 50 100
S
© KEMET Electronics Corporation • PO Box 5928 • Greenville, SC 29606 • www.kemet.com 23
LEAD MATERIALS
G = Gold plated Copper clad steel
W = Solder coated Copper clad steel
CAPACITANCE TOLERANCES
J = ±5%
M = ±20%
K = ±10%
Other tolerances available upon request
CAPACITANCE CODE
3 Digit code system expressed in
picofarads (pF)
103 = 10,000pF
151 = 150pF
PRODUCT FAMILY
V = High Voltage Radial
Capacitors
TEMP. CHARACTERISTIC
C = C0G (NP0)/BP
R = X7R (BX)
LEAD CONFIGURATION
R = Radial
STYLE
Case Size.
See data sheet for detail dimensions
V C R 40 M 102 K W A
VOLTAGE RATING
L = 500vdc V = 3000vdc
M = 1000vdc W = 4000vdc
T = 2000vdc X = 5000vdc
TEST LEVEL
S = KEMET standard screening
A = MIL-PRF-20, Group A Test
X = Special
High Temperature (+200°C), High Voltage
Radial Ceramic Cased Capacitors (C3)
VCR/VRR Series
INSTALLATION:
Parts should be soldered using a heat sink between the soldering point and the part using a soldering iron rated 18-30 watts.
Remove all traces of flux or other contamination resulting from the soldering operation. An intermittent conducting path
between the leads, at high voltage, could cause breakdown. Soldering temperature should not exceed +300°C.
PART NUMBER AND ORDERING INFORMATION
Ceramic cased capacitors, with a new, unique design concept which eliminates potential problems associated with conven-
tional epoxy cased epoxy potted capacitors.
Major application is high voltage power supplies. High voltage capacitors are also utilized on high voltage meter multiplier and
RF circuits.
MARKING EXAMPLE
Manufacturer’s ID KEC
Capacitance 106J
Voltage 500V
Date Code 123
© KEMET Electronics Corporation • PO Box 5928 • Greenville, SC 29606 • www.kemet.com
24
High Temperature (+200°C), High Voltage
Radial Ceramic Cased Capacitors (C3)
VCR Series
RADIAL
All Dimensions
in Inches (mm)
C0G DIELECTRIC
STYLE 07 40 50 60 70 80
LMAX .300 (7.62) .350 (8.89) .450 (11.43) .550 (13.97) .650 (16.51) .750 (19.05)
W MAX .300 (7.62) .400 (10.16) .500 (12.70) .600 (15.24) .700 (17.78) .800 (20.32)
TMAX .150 (3.81) .275 (6.98) .300 (7.62) .375 (9.52) .375 (9.52) .375 ( 9.52)
S.200 ± .015
(5.08 ± .38)
.300 ± .015
(7.62 ± .38)
.400 ± .015
(10.16 ± .38)
.500 ± .015
(12.70 ± .38)
.600 ± .015
(15.24 ± .38)
.600 ± .015
(15.24 ± .38)
d.025 ± .002
(.635 ±.051)
.032 ± .004
(.813 ± .102)
.032 ± .004
(.813 ± .102)
.032 ± .004
(.813 ± .102)
.032 ± .004
(.813 ± .102)
.032 ± .004
(.813 ± .102)
Cap
Cap
Code
WVDC WVDC WVDC WVDC WVDC WVDC
500 1k 2k 500 1k 2k 3k 4k 500 1k 2k 3k 4k 5k 500 1k 2k 3k 4k 5k 500 1k 2k 3k 4k 5k 500 1k 2k 3k 4k 5k
10 pF 100
12 120
15 150
18 180
22 220
27 270
33 330
39 390
47 470
56 560
68 680
82 820
100 101
120 121
150 151
180 181
220 221
270 271
330 331
390 391
470 471
560 561
680 681
820 821
1000 102
1200 122
1500 152
1800 182
2200 222
2700 272
3300 332
3900 392
4700 472
5600 562
6800 682
8200 822
0.01 μF 103
0.012 123
0.015 153
0.018 183
0.022 223
0.027 273
0.033 333
0.039 393
0.047 473
0.056 563
S
© KEMET Electronics Corporation • PO Box 5928 • Greenville, SC 29606 • www.kemet.com 25
High Temperature (+200ºC), High Voltage
Axial and Radial Ceramic Cased Capacitors (C3)
VRR Series
RADIAL
All Dimensions
in Inches (mm)
X7R DIELECTRIC
STYLE 07 40 50 60 70 80
LMAX .300 (7.62) .350 (8.89) .450 (11.43) .550 (13.97) .650 (16.51) .750 (19.05)
W MAX .300 (7.62) .400 (10.16) .500 (12.70) .600 (15.24) .700 (17.78) .800 (20.32)
TMAX .150 (3.81) .275 (6.98) .300 (7.62) .375 (9.52) .375 (9.52) .375 ( 9.52)
S.200 ± .015
(5.08 ± .38)
.300 ± .015
(7.62 ± .38)
.400 ± .015
(10.16 ± .38)
.500 ± .015
(12.70 ± .38)
.600 ± .015
(15.24 ± .38)
.600 ± .015
(15.24 ± .38)
d.025 ± .002
(.635 ±.051)
.032 ± .004
(.813 ± .102)
.032 ± .004
(.813 ± .102)
.032 ± .004
(.813 ± .102)
.032 ± .004
(.813 ± .102)
.032 ± .004
(.813 ± .102)
Cap
Cap
Code
WVDC WVDC WVDC WVDC WVDC WVDC
500 1k 2k 500 1k 2k 3k 4k 500 1k 2k 3k 4k 5k 500 1k 2k 3k 4k 5k 500 1k 2k 3k 4k 5k 500 1k 2k 3k 4k 5k
330pF 331
390 391
470 471
560 561
680 681
820 821
1000 102
1200 122
1500 152
1800 182
2200 222
2700 272
3300 332
3900 392
4700 472
5600 562
6800 682
8200 822
0.01 μF 103
0.012 123
0.015 153
0.018 183
0.022 223
0.027 273
0.033 333
0.039 393
0.047 473
0.056 563
0.068 683
0.082 823
0.10 104
0.12 124
0.15 154
0.18 184
0.22 224
0.27 274
0.33 334
0.39 394
0.47 474
0.56 564
0.68 684
0.82 824
1.0 105
1.2 125
S
World Sales Headquarters
KEMET Electronics Corporation
P.O. Box 5928
Greenville, SC 29606
Phone: 864-963-6300
Europe
KEMET Electronics S.A.
15bis chemin des Mines
1202 Geneva, Switerland
Phone: 41-22-715-0100
Asia
KEMET Electronics Marketing PTE Ltd.
73 Bukit Timah Road
#05-01 Rex House
Singapore, 229832, Singapore
Phone: 65-6586-1900
KEMET Electronics Asia Ltd.
30 Canton Road, Room 1512
SilverCord Tower II
Tsimshatshui, Kowloon
Hong Kong
Phone: 852-2305-1168
KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
KEMET reserves the right to modify minor details of internal and external construction at any time in the interest of product improvement. KEMET does not
assume any responsibility for infringement that might result from the use of KEMET capacitors in potential circuit designs.
