NOTES: 31-71043 REVISIONS DRAWING NO. REV DESCRIPTION DATE APPR |. MATERIALS AND FINISHES: BODY - ZINC DIE CAST, NICKEL PLATED [.000150 MIN THICK] THIRD ANGLE PROJ. @ <i | A RELEASE TO MFG. 8/20/98 | 42607 | CPM CONTACT - PHOSPHOR BRONZE, GOLD PLATED [.000003 MIN THICK], B SEE SHEET | 3/03/05 45392 CPM OVER TIN PLATING [.000100 MIN THICK], OVER NICKEL PLATING [.000050 MIN THICK] GOLD PLATING AT CONTACT AREA, AND TIN OVER NICKEL PLATING OVER ALL SEE SHEET | T/29/08 | 41082 | VC INSULATOR - POLYPROPYLENE, UL94V-0 GROUND TER.- COPPER WIRE, TIN PLATED [.000100 MIN THICK} D SEE SHEET | 10/7/08 | 46939 | CPM LEGS - BRASS, TIN PLATED [.000100 MIN THICK] 2. ELECTRICAL: A. IMPEDANCE: 75 OHM 3. PACKAGING: A. QUANTITY: BULK PACK OF 50 PER TRAY B. MARKING : BAG TO BE MARKED 1.3744 .012 "AMPHENOL, 31-71043, AND DATE CODE" .814+.012 ee .3384.012 @ .5054.004 SCALE 1.000 461.004 RECOMMENDED PANEL CUTOUT fo 7 SCALE 2.000 | | coe .157+.012 H -500-28UNEF-2A = 2-D .079+.004 L904. 020 y . . .200 REF .2004.004 | _ J 2-D 035.004 00 sous aa .200+.004 RECOMMENDED PCB LAYOUT CUSTOMER OUTLINE DRAWING a ALL OTHER SHEETS ARE FOR INTERNAL USE ONLY UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES AND TOLERANCES ARE: MATERIAL DRAWN DATE TITLE 2 PLACE DECIMAL 3 PLACE DECIMAL ANGLES VIVEK.C 15-May-08 Amp henol RF +.015 (0,381 mm) +.005 (0,127 mm) + 1 y BNC JACK, 75 OHM Danbury, CT, USA NOTICE - These drawings, specifications, or other data (1) are, and remain the ENGINEER DATE Tainan, Taiwan property of Ampheno | Corp. (2) must be returned upon request; and (3) are VIVEK.C 15-May-08 R/A PCB MOUNT Shenzhen Chi na confidential and not to be disclosed to any person other than those to whom they REFERENCE Z | NC D) | F CAST h Irf are given by Amphenol Corp. The furnishing of these drawings, specifications, or FARH 2272 APPROVED DATE www. amphenoiri.com th data by Amph 1c . t th t f i not to be regarded by implication or otherwise in any monner licensing, gronting. kK. CAPOZZ| 1129/08 SCALE: 3.0:1 [SHEET 2 OF 2 rights or permitting such holder or any other person to manufacture, use or sell any CAD FILE CODE ID IDWG SIZEIDRAWING NO. REV duct, design, tented th ise, that i b lated t or disclosed by said drawings, specifications, or other data. |: \BNC\31-71043 74868] B 31-11043 D