NC7WZU04P6X_F065 - Fairchild

NC7WZU04 — TinyLogic

®

UHS Dual Unbuffered Inverter

NC7WZU04 Rev. 1.0.4

June 2008

NC7WZU04

TinyLogic

®

UHS Dual Unbuffered Inverter

Features

■

Space saving SC70 6-lead package

■

Ultra small MicroPak™ leadless package

■

Unbuffered for crystal oscillator and analog

applications

■

Balanced output drive: ±8mA at 4.5V V

CC

■

Broad V

CC

operating range: 1.65V to 5.5V

■

Low quiescent power: I

CC

< 1µA at 5V V

CC

, T

A

= 25°C

General Description

The NC7WZU04 is a dual unbuffered inverter from

Fairchild’s Ultra High Speed Series of TinyLogic

®

in the

space saving SC70 6-lead package. The special pur-

pose unbuffered circuit design is intended for crystal

oscillator or analog applications. The internal circuit

consists of only one-stage, the output, to allow for this

part to be used in these oscillator or analog applications.

The device is fabricated with advanced CMOS technol-

ogy to achieve ultra high speed with high output drive

while maintaining low static power dissipation over a

very broad V

CC

operating range. The device is specified

to operate over the 1.65V to 5.5V V

CC

range. The inputs

are high impedance when V

CC

is 0V. Inputs tolerate

voltages up to 7V independent of V

CC

operating voltage.

Ordering Information

All packages are lead free per JEDEC: J-STD-020B standard.

Logic Symbol

Order

Number

Package

Number

Package Code

Top Mark Package Description Supplied As

NC7WZU04P6X MAA06A ZU4 6-Lead SC70, EIAJ SC88,

1.25mm Wide

3k Units on Tape and Reel

NC7WZU04L6X MAC06A B5 6-Lead MicroPak, 1.0mm Wide 5k Units on Tape and Reel

A

1

IEEE/IEC

1Y

1

A

2

Y

2

NC7WZU04 Rev. 1.0.4 2

NC7WZU04 — TinyLogic

®

UHS Dual Unbuffered Inverter

Connection Diagrams Pin Descriptions

Function Table

Y = A

H = HIGH Logic Level

L = LOW Logic Level

Pad Assignments for MicroPak

(Top Through View)

(Top View)

Pin One Orientation Diagram

1

A1

AAA represents Product Code Top Mark – see

ordering code

Note: Orientation of Top Mark determines Pin One

location. Read the top product code mark left to

right, Pin One is the lower left pin (see diagram).

AAA

Pin One

(Top View)

Pin Assignment for SC70

A1Y1

1 6

GND VCC

2 5

A2Y2

3 4

2

GND

3

6

5

4

A2

Y1

VCC

Y2

Pin Name Description

A

1

, A

2

Data Inputs

Y

1

, Y

2

Outputs

Input Output

AY

LH

HL

NC7WZU04 Rev. 1.0.4 3

NC7WZU04 — TinyLogic

®

UHS Dual Unbuffered Inverter

Absolute Maximum Ratings

The “Absolute Maximum Ratings” are those values beyond which the safety of the device cannot be guaranteed.

The device should not be operated at these limits. The parametric values defined in the Electrical Characteristics

tables are not guaranteed at the absolute maximum ratings. The “Recommended Operating Conditions” table will

define the conditions for actual device operation.

Recommended Operating Conditions

(1)

The Recommended Operating Conditions table defines the conditions for actual device operation. Recommended

operating conditions are specified to ensure optimal performance to the datasheet specifications. Fairchild does not

recommend exceeding them or designing to absolute maximum ratings.

Note:

1. Unused inputs must be held HIGH or LOW. They may not float.

Symbol Parameter Rating

V

CC

Supply Voltage –0.5V to +7V

V

IN

DC Input Voltage –0.5V to +7V

V

OUT

DC Output Voltage –0.5V to +7V

I

IK

DC Input Diode Current @ V

IN

≤

–0.5V –50mA

I

OK

DC Output Diode Current @

V

OUT

< –0.5V

V

OUT

> 0.5V, V

CC

= GND

–50mA

+50mA

I

OUT

DC Output Current ±50mA

I

CC

/I

GND

DC V

CC

/GND Current ±100mA

T

STG

Storage Temperature –65°C to +150°C

T

J

Junction Temperature under Bias 150°C

T

L

Junction Lead Temperature (Soldering, 10 seconds) 260°C

P

D

Power Dissipation @ +85°C

SC70-6

Micropak-6

215mW

Symbol Parameter Rating

V

CC

Supply Voltage Operating 1.8V to 5.5V

V

CC

Supply Voltage Data Retention 1.5V to 5.5V

V

IN

Input Voltage 0V to 5.5V

V

OUT

Output Voltage 0V to V

CC

T

A

Operating Temperature –40°C to +85°C

θ

JA

Thermal Resistance

SC70-6

Micropak-6

350°C/W

NC7WZU04 Rev. 1.0.4 4

NC7WZU04 — TinyLogic

®

UHS Dual Unbuffered Inverter

DC Electrical Characteristics

Symbol

Parameter V

CC

(V) Conditions

T

A

=

Units

+25°C

-40°C to +85°C

Min . Typ. Max . Min. Max.

V

IH

HIGH Level

Input Voltage

1.8 to 2.7 0.85 V

CC

0.85 V

CC

V

3.0 to 5.5 0.8 V

CC

0.8 V

CC

V

IL

LOW Level

Input Voltage

1.8 to 2.7 0.15 V

CC

0.15 V

CC

V

3.0 to 5.5 0.2 V

CC

0.2 V

CC

V

OH

HIGH Level

Output Voltage

1.65 V

IN

= V

IL

I

OH

= -100µA 1.55 1.65 1.55 V

1.8 1.6 1.79 1.6

2.3 2.1 2.29 2.1

3.0 2.7 2.99 2.7

4.5 4.0 4.48 4.0

1.65 V

IN

= GND I

OH

= -2mA 1.29 1.52 1.29 V

2.3 I

OH

= -2mA 1.9 2.19 1.9

3.0 I

OH

= -4mA 2.4 2.82 2.4

3.0 I

OH

= -6mA 2.3 2.73 2.3

4.5 I

OH

= -8mA 3.8 4.24 3.8

VOL LOW Level

Output Voltage

1.65 V

IN

= V

IH

I

OL

= 100µA 0.01 0.2 0.2 V

1.8 0.01 0.2 0.2

2.3 0.01 0.2 0.2

3.0 0.01 0.3 0.3

4.5 0.01 0.5 0.5

1.65 V

IN

= V

CC

I

OL

= 2mA 0.10 0.24 0.24 V

2.3 I

OL

= 2mA 0.12 0.3 0.3

3.0 I

OL

= 4mA 0.19 0.4 0.4

3.0 I

OL

= 6mA 0.29 0.55 0.55

4.5 I

OL

= 8mA 0.29 0.55 0.55

I

IN

Input Leakage

Current

0 to 5.5 V

IN

= 5.5V, GND ±0.1 ±1.0 µA

I

CC

Quiescent

Supply Current

1.65 to 5.5 V

IN

= 5.5V, GND 1.0 10 µA

I

CCPEAK

Peak Supply

Current in

Analog

Operation

1.8 V

OUT

= Open

V

IN

= Adjust for Peak

I

CC

Current

0.2 mA

2.5 2

3.3 5

5.0 15

NC7WZU04 Rev. 1.0.4 5

NC7WZU04 — TinyLogic

®

UHS Dual Unbuffered Inverter

AC Electrical Characteristics

Note:

2. C

PD

is defined as the value of the internal equivalent capacitance which is derived from dynamic operating current

consumption (I

CCD

) at no output loading and operating at 50% duty cycle. (See Figure 2.) C

PD

is related to I

CCD

dynamic operating current by the expression:

I

CCD

=

(C

PD

)(V

CC

)(f

IN

) + (I

CC

static).

AC Loading and Waveforms

Symbol Parameter V

CC

(V) Conditions

T

A

=

Units

Figure

Number

+25˚C –40°C to +85°C

Min. Typ. Max. Min. Max.

t

PLH

, t

PHL

Propagation Delay 1.65 CL = 15pF,

RL = 1MΩ

1.5 5.5 9.8 1.5 11.0 ns Figure 1

Figure 3

1.8 1.5 4.6 8.1 1.5 8.9

2.5 ± 0.2 1.2 3.3 5.7 1.2 6.3

3.3 ± 0.3 0.8 2.7 4.1 0.8 4.5

5.0 ± 0.5 0.5 2.2 3.3 0.5 3.6

3.3 ± 0.3 CL = 50pF,

RL = 500Ω,

1.2 4.0 6.4 1.2 7.0 ns Figure 1

Figure 3

5.0 ± 0.5 0.8 3.4 5.6 0.8 6.2

CIN Input Capacitance 0 3 pF

CPD Power Dissipation

Capacitance

3.3 Note 2 3.5 pF Figure 2

5.0 5.5

tr = 3ns

Input Output

tPLH

Input

Output

Figure 3. AC Waveforms

Figure 1. AC Test Circuit

Figure 2. ICCD Test Circuit

tf = 3ns

VOH

90%

50% 50%

90%

10% 10%

50% 50%

tPHL

tW

VOL

VCC

GND

RL

CL*

VCC

*CL includes load and stray capacitance.

Input PRR = 1.0MHz; tW = 500ns

A

Input

Application Note: When operating the NC7WZU04’s

unbuffered output stage in its linear range, as in oscillator

applications, care must be taken to observe maximum power

rating for the device and package. The high drive nature of

the design of the output stage will result in substantial simultaneous

conduction currents when the stage is in the linear region. See

the ICCPEAK specification on page 2.

Input = AC Waveform; tr, tf = 1.8ns;

PRR = 10MHz; Duty Cycle = 50%

NC7WZU04 Rev. 1.0.4 6

NC7WZU04 — TinyLogic® UHS Dual Unbuffered Inverter

Tape and Reel Specification

Tape Format for SC70

Tape Dimension inches (millimeters)

Package

Designator

Tape

Section

Number

Cavities

Cavity

Status

Cover Tape

Status

P6X Leader (Start End) 125 (typ) Empty Sealed

Carrier 3000 Filled Sealed

Trailer (Hub End) 75 (typ) Empty Sealed

PackageTape Size Dim A Dim B Dim F Dim KODim P1 Dim W

SC70-6 8mm 0.093

(2.35)

0.096

(2.45)

0.138 ± 0.004

(3.5 ± 0.10)

0.053 ± 0.004

(1.35 ± 0.10)

0.157

(4)

0.315 ± 0.004

(8 ± 0.1)

NC7WZU04 Rev. 1.0.4 7

NC7WZU04 — TinyLogic® UHS Dual Unbuffered Inverter

Tape and Reel Specification (Continued)

Tape Format for MicroPak

Tape Dimension inches (millimeters)

Package

Designator

Tape

Section

Number

Cavities

Cavity

Status

Cover Tape

Status

L6X Leader (Start End) 125 (typ.) Empty Sealed

Carrier 3000 Filled Sealed

Trailer (Hub End) 75 (typ) Empty Sealed

NC7WZU04 Rev. 1.0.4 8

NC7WZU04 — TinyLogic® UHS Dual Unbuffered Inverter

Tape and Reel Speciﬁcation (Continued)

Reel Dimension for MicroPak inches (millimeters)

Tape Size ABCDN W1 W2 W3

8mm 7.0

(177.8)

0.059

(1.50)

0.512

(13.00)

0.795

(20.20)

2.165

(55.00)

0.331 + 0.059/–0.000

(8.40 + 1.50/–0.00)

0.567

(14.40)

W1 + 0.078/–0.039

(W1 + 2.00/–1.00)

NC7WZU04 Rev. 1.0.4 9

NC7WZU04 — TinyLogic® UHS Dual Unbuffered Inverter

Physical Dimensions

Figure 4. 6-Lead SC70, EIAJ SC88, 1.25mm Wide

Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner

without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or

obtain the most recent revision. Package speciﬁcations do not expand the terms of Fairchild’s worldwide terms and conditions,

speciﬁcally the warranty therein, which covers Fairchild products.

Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings:

http://www.fairchildsemi.com/packaging/

RECOMMENED

LAND PATTERN

NC7WZU04 Rev. 1.0.4 10

NC7WZU04 — TinyLogic® UHS Dual Unbuffered Inverter

Physical Dimensions (Continued)

Figure 5. 6-Lead MicroPak, 1.0mm Wide

Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner

without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or

obtain the most recent revision. Package speciﬁcations do not expand the terms of Fairchild’s worldwide terms and conditions,

speciﬁcally the warranty therein, which covers Fairchild products.

Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings:

http://www.fairchildsemi.com/packaging/

2. DIMENSIONS ARE IN MILLIMETERS

1. CONFORMS TO JEDEC STANDARD M0-252 VARIATION UAAD

MAC06AREVC

Notes:

3. DRAWING CONFORMS TO ASME Y14.5M-1994

TOP VIEW

SIDE VIEW

RECOMMENED

LAND PATTERN

BOTTOM VIEW

1.45

1.00

A

B0.05 C

0.05 C

2X

0.55 MAX.

0.05 C

(0.49)

(1)

(0.75)

(0.52)

(0.30)

6X

1X

6X

PIN 1

DETAIL A

0.075 X 45

CHAMFER

0.25

0.15

0.35

0.25

0.40

0.30

0.5

(0.05)

1.0

5X

DETAIL A

PIN 1 TERMINAL

0.40

0.30

0.45

0.35

0.10

0.00

0.10 C B A

0.05 C

C

0.05 C

0.05

0.00

5X

6X (0.13)

4X

6X

NC7WZU04 Rev. 1.0.4 11

TRADEMARKS

The following includes registered and unregistered trademarks and service marks, owned by Fairchild Semiconductor and/or its global

subsidiaries, and is not intended to be an exhaustive list of all such trademarks.

ACEx®

Build it Now™

CorePLUS™

CorePOWER™

CROSSVOLT™

CTL™

Current Transfer Logic™

EcoSPARK®

EfficentMax™

EZSWITCH™ *

™

®

Fairchild®

Fairchild Semiconductor®

FACT Quiet Series™

FACT®

FAST®

FastvCore™

FlashWriter®*

FPS™

F-PFS™

FRFET®

Global Power ResourceSM

Green FPS™

Green FPS™e-Series™

GTO™

IntelliMAX™

ISOPLANAR™

MegaBuck™

MICROCOUPLER™

MicroFET™

MicroPak™

MillerDrive™

MotionMax™

Motion-SPM™

OPTOLOGIC®

OPTOPLANAR®

®

PDP SPM™

Power-SPM™

PowerTrench®

Programmable Active Droop™

QFET®

QS™

Quiet Series™

RapidConfigure™

Saving our world, 1mW at a time™

SmartMax™

SMART START™

SPM®

STEALTH™

SuperFET™

SuperSOT™-3

SuperSOT™-6

SuperSOT™-8

SupreMOS™

SyncFET™

®

The Power Franchise®

TinyBoost™

TinyBuck™

TinyLogic®

TINYOPTO™

TinyPower™

TinyPWM™

TinyWire™

µSerDes™

UHC®

Ultra FRFET™

UniFET™

VCX™

VisualMax™

*EZSWITCH™ and FlashWriter®are trademarks of System General Corporation, used under license by Fairchild Semiconductor.

DISCLAIMER

FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS

HEREIN TO IMPROVE RELIABILITY, FUNCTION, OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE

APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS

PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD’S

WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS.

LIFE SUPPORT POLICY

FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR

SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION.

As used herein:

1. Life support devices or systems are devices or systems

which, (a) are intended for surgical implant into the body or

(b) support or sustain life, and (c) whose failure to perform

when properly used in accordance with instructions for use

provided in the labeling, can be reasonably expected to

result in a significant injury of the user.

2. A critical component in any component of a life support,

device, or system whose failure to perform can be

reasonably expected to cause the failure of the life support

device or system, or to affect its safety or effectiveness.

PRODUCT STATUS DEFINITIONS

Definition of Terms

Datasheet Identification Product Status Definition

Advance Information Formative / In Design This datasheet contains the design specifications for product development.

Specifications may change in any manner without notice.

Preliminary

This datasheet contains preliminary data; supplementary data will be published

at a later date. Fairchild Semiconductor reserves the right to make changes at

any time without notice to improve design.

No Identification Needed Full Production

First Production

This datasheet contains final specifications. Fairchild Semiconductor reserves

the right to make changes at any time without notice to improve the design.

Obsolete Not In Production This datasheet contains specifications on a product that is discontinued by

Fairchild Semiconductor. The datasheet is for reference information only.

Rev. I34

NC7WZU04 — TinyLogic® UHS Dual Unbuffered Inverter