CTS Reeves
FREQUENCY PRODUCTS
CRYSTALS CLOCKS VCXOs TCXOs OCXOs
17
400 REIMANN AVE. • SANDWICH, IL 60548
Phone: 815-786-8411 • Fax: 815-786-3600 • E-Mail: www.ctsreeves.com
Electrical Specifications:
Standard Crystals
MP Series
Features:
• Frequency Range: 1-48 MHz
• Thru Hole or Surface Mount
• Standard Frequencies Stocked
by CTS Distributors
• Rugged Resistance Weld Seal
• Low Cost: AT-Cut Resonators
• Non-Standard Frequencies or Tolerances
also Available, Consult Factory
The MP Series are the right choice for Microprocessor, controller, or other standard crystal
applications. These hermetic packages use Resistance Weld sealing for improved aging and
reliability. Surface mount lead forming is available as well as insulating sleeve, top wire, bent
leads, or tape/reel packaging.
Frequency Range 1.0 - 48 MHz
Calibration Tolerance ±0.005% (±50 ppm) at +25°C
Temperature Stability ±0.005% (±50 ppm) of +25°C reading
Operating Temperature Range -0°C to +70°C
Operating Mode Fundamental (or 3rd O.T. as applicable)
Drive Level 100 Microwatts
Shunt Capacitance 7 pF, Max
Aging <10 ppm/Yr
Parameter
Standard Frequency Table:
PART FREQUENCY LOAD/
NUMBER (MHz) HOLDER SERIES
MP05A 5.000000 HC/49 20pF
MP05B 5.000000 HC/49 SERIES
MP050 5.068800 HC/49 SERIES
MP060 6.000000 HC/49 20pF
MP061 6.144000 HC/49 20pF
MP073 7.372800 HC/49 SERIES
MP080 8.000000 HC/49 SERIES
MP080A 8.000000 HC/49 20pF
MP098 9.830400 HC/49 20pF
MP100 10.000000 HC/49 SERIES
MP101 10.000000 HC/49 30pF
MP107 10.738635 HC/49 32pF
MP110 11.000000 HC/49 18pF
MP111 11.059200 HC/49 SERIES
PART FREQUENCY LOAD/
NUMBER (MHz) HOLDER SERIES
MP120 12.000000 HC/49 SERIES
MP122 12.288800 HC/49 32pF
MP143 14.318180 HC/49 SERIES
MP147 14.745600 HC/49 SERIES
MP150 15.000000 HC/49 SERIES
MP160 16.000000 HC/49 SERIES
MP184 18.432000 HC/49 SERIES
MP196 19.660800 HC/49 SERIES
MP200 20.000000 HC/49 SERIES
MP221 22.118400 HC/49 SERIES
MP240 24.000000 HC/49 SERIES
MP245 24.576000 HC/49 SERIES
MP250 25.000000 HC/49 SERIES
PART FREQUENCY LOAD/
NUMBER (MHz) HOLDER SERIES
MP010 1.000000 HC/33-51 13pF
MP018 1.843200 HC/33-51 13pF
MP018S 1.843200 HC/49 13pF
MP020 2.000000 HC/33-51 20pF
MP020S 2.000000 HC/49 20pF
MP024 2.457600 HC/33-51 32pF
MP024S 2.457600 HC/49 32pF
MP036 3.579545 HC/33/51 18pF
MP036S 3.579545 HC/49 18pF
MP037 3.686400 HC/49 20pF
MP040 4.000000 HC/49 20pF
MP04A 4.000000 HC/49 SERIES
MP041 4.194304 HC/49 12pF
MP042 4.915200 HC/49 20pF
18
CTS Reeves
FREQUENCY PRODUCTS
400 REIMANN AVE. • SANDWICH, IL 60548
Phone: 815-786-8411 • Fax: 815-786-3600 • E-Mail: www.ctsreeves.com
CRYSTALS
CLOCKS
VCXOs
TCXOs
OCXOs
Mechanical/Environmental Specifications
Package type:
Metal cover; hermetic seal base,
resistance weld seal
Storage Temperature:
-40 to +85°C
Solderability
63Sn/37Pb solder, 5 sec. @ 245°C using
RMA flux; 95% coverage, minimum
Leak test
<2x10-8cc-atm/sec
Insulation Resistance:
500 Mohm min @ 100v.
Ordering Information
MP ___ ___ ___ ___ ___
The first three digits come from “MP-Crystals — Standard Frequencies Table”
*This space is optional and may be an “A”, “B”, or “S” from the same
Standard Frequency table.
**This space is optional and may define:
“TW” = Hold down Top Wire
“SLV” = Insulating Sleeve
“SM” = Surface Mount lead form
“INS” = Insulating Spacer
“1” = Tape and Reel loading for Surface Mount
(see “Tape and Reel” page for tape dimensions)
“2” = (Axial) Tape and Reel for Through Hole
Standard Crystals
MP Series
Custom frequencies specified upon request. Contact CTS Reeves for more information.
* **
INS SM
