To our customers, Old Company Name in Catalogs and Other Documents On April 1st, 2010, NEC Electronics Corporation merged with Renesas Technology Corporation, and Renesas Electronics Corporation took over all the business of both companies. Therefore, although the old company name remains in this document, it is a valid Renesas Electronics document. We appreciate your understanding. Renesas Electronics website: http://www.renesas.com April 1st, 2010 Renesas Electronics Corporation Issued by: Renesas Electronics Corporation (http://www.renesas.com) Send any inquiries to http://www.renesas.com/inquiry. Notice 1. 2. 3. 4. 5. 6. 7. All information included in this document is current as of the date this document is issued. Such information, however, is subject to change without any prior notice. Before purchasing or using any Renesas Electronics products listed herein, please confirm the latest product information with a Renesas Electronics sales office. Also, please pay regular and careful attention to additional and different information to be disclosed by Renesas Electronics such as that disclosed through our website. Renesas Electronics does not assume any liability for infringement of patents, copyrights, or other intellectual property rights of third parties by or arising from the use of Renesas Electronics products or technical information described in this document. No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights of Renesas Electronics or others. You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, whether in whole or in part. Descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of semiconductor products and application examples. You are fully responsible for the incorporation of these circuits, software, and information in the design of your equipment. Renesas Electronics assumes no responsibility for any losses incurred by you or third parties arising from the use of these circuits, software, or information. When exporting the products or technology described in this document, you should comply with the applicable export control laws and regulations and follow the procedures required by such laws and regulations. You should not use Renesas Electronics products or the technology described in this document for any purpose relating to military applications or use by the military, including but not limited to the development of weapons of mass destruction. Renesas Electronics products and technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable domestic or foreign laws or regulations. Renesas Electronics has used reasonable care in preparing the information included in this document, but Renesas Electronics does not warrant that such information is error free. Renesas Electronics assumes no liability whatsoever for any damages incurred by you resulting from errors in or omissions from the information included herein. Renesas Electronics products are classified according to the following three quality grades: "Standard", "High Quality", and "Specific". The recommended applications for each Renesas Electronics product depends on the product's quality grade, as indicated below. You must check the quality grade of each Renesas Electronics product before using it in a particular application. You may not use any Renesas Electronics product for any application categorized as "Specific" without the prior written consent of Renesas Electronics. Further, you may not use any Renesas Electronics product for any application for which it is not intended without the prior written consent of Renesas Electronics. Renesas Electronics shall not be in any way liable for any damages or losses incurred by you or third parties arising from the use of any Renesas Electronics product for an application categorized as "Specific" or for which the product is not intended where you have failed to obtain the prior written consent of Renesas Electronics. The quality grade of each Renesas Electronics product is "Standard" unless otherwise expressly specified in a Renesas Electronics data sheets or data books, etc. "Standard": 8. 9. 10. 11. 12. Computers; office equipment; communications equipment; test and measurement equipment; audio and visual equipment; home electronic appliances; machine tools; personal electronic equipment; and industrial robots. "High Quality": Transportation equipment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anticrime systems; safety equipment; and medical equipment not specifically designed for life support. "Specific": Aircraft; aerospace equipment; submersible repeaters; nuclear reactor control systems; medical equipment or systems for life support (e.g. artificial life support devices or systems), surgical implantations, or healthcare intervention (e.g. excision, etc.), and any other applications or purposes that pose a direct threat to human life. You should use the Renesas Electronics products described in this document within the range specified by Renesas Electronics, especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation characteristics, installation and other product characteristics. Renesas Electronics shall have no liability for malfunctions or damages arising out of the use of Renesas Electronics products beyond such specified ranges. Although Renesas Electronics endeavors to improve the quality and reliability of its products, semiconductor products have specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Further, Renesas Electronics products are not subject to radiation resistance design. Please be sure to implement safety measures to guard them against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a Renesas Electronics product, such as safety design for hardware and software including but not limited to redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system manufactured by you. Please contact a Renesas Electronics sales office for details as to environmental matters such as the environmental compatibility of each Renesas Electronics product. Please use Renesas Electronics products in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS Directive. Renesas Electronics assumes no liability for damages or losses occurring as a result of your noncompliance with applicable laws and regulations. This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written consent of Renesas Electronics. Please contact a Renesas Electronics sales office if you have any questions regarding the information contained in this document or Renesas Electronics products, or if you have any other inquiries. (Note 1) "Renesas Electronics" as used in this document means Renesas Electronics Corporation and also includes its majorityowned subsidiaries. (Note 2) "Renesas Electronics product(s)" means any product developed or manufactured by or for Renesas Electronics. HD74LS193 Synchronous Up / Down Decade Counter (dual clock lines) REJ03D0455-0200 Rev.2.00 Feb.18.2005 Synchronous operation is provided by having all flip-flops clocked simultaneously so that the output change coincidently with each other when so instructed by the steering logic. This mode of operation eliminates the output counting spikes, which are normally associated with asynchronous (ripple clock) counters. The outputs of the four master-slave flip-flops are triggered by a low-to-high-level transition of either count (clock) input. The direction of counting is determined by which count input is pulsed while the other count input is high. This counter is fully programmable; that is, each output may be preset to either level by entering the desired data at the data inputs while the load inputs is low. The output will change to agree with the data inputs independently of the count pulses. This feature allows the counters to be used as modulo-N dividers by simply modifying the count length with the preset inputs. A clear input has been provided which forces all outputs to the low level when a high level is applied. The clear function is independent of the count and load inputs. The clear, count, and load inputs are buffered to lower the drive requirements. This reduces the number of clock drivers, etc., required for long words. This counter was designed to be cascaded without the need for external circuitry. Both borrow and carry outputs are available to cascade both the upand down-counting functions. The borrow output produces a pulse equal in width to the count-down input when the counter underflows. Similarly, the carry output produces a pulse equal in width to the count up input when an overflow condition exists. The counters can be easily cascaded by feeding the borrow and carry outputs to the count-down and count-up inputs respectively of .the succeeding counter. Features * Ordering Information Part Name Package Type Package Code (Previous Code) Package Abbreviation Taping Abbreviation (Quantity) HD74LS193P DILP-16 pin PRDP0016AE-B (DP-16FV) P -- HD74LS193FPEL SOP-16 pin (JEITA) PRSP0016DH-B (FP-16DAV) FP EL (2,000 pcs/reel) HD74LS193RPEL SOP-16 pin (JEDEC) PRSP0016DG-A (FP-16DNV) RP EL (2,500 pcs/reel) Note: Please consult the sales office for the above package availability. Rev.2.00, Feb.18.2005, page 1 of 11 HD74LS193 Pin Arrangement Data B Input 1 QB 2 QB QA 3 QA Count Down Count Up QC 6 QC QD 7 QD GND 8 16 VCC A 15 Data A Clear 14 Clear 4 Count Borrow Down 13 Borrow 5 Count Up Carry 12 Carry Load 11 Load C 10 Data C 9 Data D B Outputs Inputs Inputs Outputs Outputs D (Top view) Rev.2.00, Feb.18.2005, page 2 of 11 Inputs HD74LS193 Block Diagram Borrow Output Carry Output Data Input A QA Down Count Output QA T QA Up Count Data Input B QB Output QB T QB Data Input C QC Output QC T QC Data Input D Clear QD Output QD T QD Load Absolute Maximum Ratings Item Symbol Ratings Unit Supply voltage VCC 7 V Input voltage VIN 7 V Power dissipation PT 400 mW Tstg -65 to +150 C Storage temperature Note: Voltage value, unless otherwise noted, are with respect to network ground terminal. Rev.2.00, Feb.18.2005, page 3 of 11 HD74LS193 Recommended Operating Conditions Item Symbol Min Typ Max Unit VCC 4.75 5.00 5.25 V IOH -- -- -400 A IOL -- -- 8 mA Operating temperature Topr -20 25 75 C Clock frequency clock 0 -- 25 MHz tw 20 -- -- ns tsu (CLR) 40 -- -- ns Setup time tsu 20 -- -- ns Hold time th 3 -- -- ns Supply voltage Output current Pulse width Setup time (Clear) Electrical Characteristics (Ta = -20 to +75 C) Item Input voltage Symbol VIH VIL min. 2.0 -- typ.* -- -- max. -- 0.8 Unit V V VOH 2.7 -- -- V II -- -- -- -- -- -- -- -- -- -- 0.4 0.5 20 -0.4 0.1 A mA mA VCC = 5.25 V, VI = 2.7 V VCC = 5.25 V, VI = 0.4 V VCC = 5.25 V, VI = 7 V IOS -20 -- -100 mA VCC = 5.25 V ICC VIK -- -- 19 -- 34 -1.5 mA V VCC = 5.25 V VCC = 4.75 V, IIN = -18 mA Output voltage VOL Input current Short-circuit output current Supply current** Input clamp voltage IIH IIL V Condition VCC = 4.75 V, VIH = 2 V, VIL = 0.8 V, IOH = -400 A IOL = 4 mA VCC = 4.75 V, VIH = 2 V, VIL = 0.8 V IOL = 8 mA Notes: * VCC = 5 V, Ta = 25C ** ICC is measured with all outputs open, clear and load inputs grounded, and all other inputs at 4.5 V. Switching Characteristics (VCC = 5 V, Ta = 25C) Item Maximum clock frequency Propagation delay time Symbol max tPLH tPHL tPLH tPHL tPLH tPHL tPLH tPHL tPHL Rev.2.00, Feb.18.2005, page 4 of 11 Inputs Outputs Count-up Carry Count-down Borrow Either Count Q Load Q Clear Q min. 25 -- -- -- -- -- -- -- typ. 32 17 18 16 15 27 30 24 max. -- 26 24 24 24 38 47 40 -- -- 25 23 40 35 Unit MHz Condition ns ns ns ns ns CL = 15 pF, RL = 2 k HD74LS193 Count Sequences Clear Load A Data Inputs B C D Count Up Count Down QA QB Outputs QC QD Carry Borrow 14 0 13 15 0 1 Count Up 2 1 0 14 Count Down Clear Preset Illustrated below is the following sequence: 1. Clear outputs to zero. 2. Load (preset) to binary thirteen. 3. Count up to fourteen, fifteen, carry, zero, one and two. 4. Count down to one, zero, borrow, fifteen, fourteen, and thirteen. Rev.2.00, Feb.18.2005, page 5 of 11 15 13 HD74LS193 Testing Method Test Circuit VCC Output 4.5V RL Load circuit 1 Borrow CL Up Output Down See Testing Table Input P.G. Zout = 50 Carry A Same as Load Circuit 1. Output B QA C Same as Load Circuit 1. Output D QB Same as Load Circuit 1. Output Load Clear QC Same as Load Circuit 1. Output QD Notes: Same as Load Circuit 1. 1. CL includes probe and jig capacitance. 2. All diodes are 1S2074(H). Testing Table Item max tPLH tPHL From input to output Up Count Down Count Up Count Down Count LoadQ ClearQ CLR GND GND GND GND GND IN Load 4.5V 4.5V 4.5V 4.5V IN IN* Up IN 4.5V IN 4.5V GND GND Inputs Down A 4.5V GND IN GND 4.5V GND IN GND GND IN GND 4.5V B GND GND GND GND IN 4.5V C GND GND GND GND IN 4.5V D GND GND GND GND IN 4.5V Note: *. For initialized Item max tPLH tPHL From input to output Up Count Down Count Up Count Down Count LoadQ ClearQ Rev.2.00, Feb.18.2005, page 6 of 11 Outputs QA QB QC QD Carry Borrow OUT OUT OUT OUT OUT OUT OUT OUT OUT OUT OUT OUT OUT OUT OUT OUT OUT OUT OUT OUT OUT OUT OUT OUT OUT -- OUT -- -- -- -- OUT -- OUT -- -- HD74LS193 Waveforms 1 max, tPLH, tPHL, (Count Up) tTLH Count Up 10% tTHL 90% 90% 1.3V 1.3V 10% tw (H) tw (L) tPLH QA (Measure at tn + 1) 3V 1.3V 1.3V 0V tPHL (Measure at tn + 2) VOH 1.3V tPHL (Measure at tn + 4) QB tPLH (Measure at tn + 2) VOL VOH 1.3V 1.3V VOL Outputs QC tPHL (Measure at tn + 8) 1.3V tPLH (Measure at tn + 4) tPHL (Measure at tn + 16) tPLH (Measure at tn + 8) VOH 1.3V VOL QD 1.3V VOH 1.3V VOL (Measure before 1 clock of tn + 16) tPHL tPLH (Measure at tn + 16) VOH Carry 1.3V 1.3V VOL Notes: 1. Input pulse; tTLH, tTHL 7 ns, Duty Cycle 50%, PRR = 500 kHz (Data input). PRR = 1 MHz (except data input) 2. for max tTLH = tTHL 2.5 ns. 3. tn is reference bit time when all outputs are low. Rev.2.00, Feb.18.2005, page 7 of 11 HD74LS193 Waveforms 2 max, tPLH, tPHL, (Count Down) tTLH tTHL tw (H) tw (L) 3V Count Down 90% 90% 1.3V 1.3V 1.3V 1.3V 1.3V 0V 10% 10% tPLH (Measure (Measure at tn + 1) tPHL at tn + 0) VOH QA 1.3V 1.3V 1.3V VOL tPHL (Measure at tn + 2) tPLH (Measure at tn + 0) QB 1.3V VOH 1.3V VOL tPLH (Measure tPHL (Measure at tn + 4) Outputs at tn + 0) QC 1.3V 1.3V VOH VOL tPLH (Measure tPHL (Measure at tn + 8) at tn + 0) VOH QD 1.3V 1.3V VOL t (Measure before 1 clock of tn + 0) PHL tPLH (Measure at tn + 0) VOH Borrow 1.3V 1.3V VOL Notes: 1. Input pulse; tTLH 7 ns, tTHL 7 ns, PRR = 1 MHz, duty cycle 50% 2. for max tTLH , tTHL 2.5 ns. 3. tn is reference bit time when all outputs are high. Rev.2.00, Feb.18.2005, page 8 of 11 HD74LS193 Waveforms 3 tPLH, tPHL, (Load, ClearQ) tTLH tTHL 3V Clear 10% 90% 90% 1.3V 1.3V 10% 0V tTLH tw (CLR) 20ns Data Inputs (A to D) tTHL 3V 10% 90% 1.3V 90% 1.3V tsu th 10% tsu tTHL 90% 1.3V Load tPHL 0V 3V 90% 1.3V 10% 10% tTLH tPLH 1.3V 1.3V 0V tPHL VOH Q 1.3V 1.3V 1.3V VOL Note: Input pulse: tTLH 7 ns, tTHL 7 ns Rev.2.00, Feb.18.2005, page 9 of 11 HD74LS193 Package Dimensions JEITA Package Code P-DIP16-6.3x19.2-2.54 RENESAS Code PRDP0016AE-B MASS[Typ.] 1.05g Previous Code DP-16FV D 9 E 16 1 8 b3 0.89 Z A1 A Reference Symbol L e Nom c e1 D 19.2 E 6.3 JEITA Package Code P-SOP16-5.5x10.06-1.27 RENESAS Code PRSP0016DH-B *1 Previous Code FP-16DAV 7.4 A1 0.51 b p 0.40 b 3 0.48 0.56 1.30 c 0.19 0 e 2.29 0.25 0.31 2.54 2.79 15 1.12 L 2.54 MASS[Typ.] 0.24g NOTE) 1. DIMENSIONS"*1 (Nom)"AND"*2" DO NOT INCLUDE MOLD FLASH. 2. DIMENSION"*3"DOES NOT INCLUDE TRIM OFFSET. D F 16 20.32 5.06 Z ( Ni/Pd/Au plating ) Max 7.62 1 A bp e Dimension in Millimeters Min 9 c HE *2 E bp Index mark Reference Symbol Terminal cross section ( Ni/Pd/Au plating ) 1 Z *3 bp Nom D 10.06 E 5.50 Max 10.5 A2 8 e Dimension in Millimeters Min x A1 M 0.00 0.10 0.20 0.34 0.40 0.46 0.15 0.20 0.25 7.80 8.00 A L1 2.20 bp b1 c A c A1 y L Detail F 1 0 HE 7.50 e 1.27 x 0.12 y 0.15 0.80 Z L L Rev.2.00, Feb.18.2005, page 10 of 11 8 0.50 1 0.70 1.15 0.90 HD74LS193 JEITA Package Code P-SOP16-3.95x9.9-1.27 RENESAS Code PRSP0016DG-A *1 Previous Code FP-16DNV MASS[Typ.] 0.15g D NOTE) 1. DIMENSIONS"*1 (Nom)"AND"*2" DO NOT INCLUDE MOLD FLASH. 2. DIMENSION"*3"DOES NOT INCLUDE TRIM OFFSET. F 16 9 c *2 Index mark HE E bp Reference Symbol Terminal cross section ( Ni/Pd/Au plating ) Dimension in Millimeters Min Nom Max D 9.90 10.30 E 3.95 A2 8 1 Z e *3 bp x A1 0.10 0.14 0.25 0.34 0.40 0.46 0.15 0.20 0.25 6.10 6.20 1.75 A M L1 bp b1 c A c A1 L y Detail F 1 0 HE 5.80 1.27 e x 0.25 y 0.15 0.635 Z 0.40 L L Rev.2.00, Feb.18.2005, page 11 of 11 8 1 0.60 1.08 1.27 Sales Strategic Planning Div. Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan Keep safety first in your circuit designs! 1. Renesas Technology Corp. puts the maximum effort into making semiconductor products better and more reliable, but there is always the possibility that trouble may occur with them. Trouble with semiconductors may lead to personal injury, fire or property damage. Remember to give due consideration to safety when making your circuit designs, with appropriate measures such as (i) placement of substitutive, auxiliary circuits, (ii) use of nonflammable material or (iii) prevention against any malfunction or mishap. Notes regarding these materials 1. These materials are intended as a reference to assist our customers in the selection of the Renesas Technology Corp. product best suited to the customer's application; they do not convey any license under any intellectual property rights, or any other rights, belonging to Renesas Technology Corp. or a third party. 2. Renesas Technology Corp. assumes no responsibility for any damage, or infringement of any third-party's rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples contained in these materials. 3. All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the time of publication of these materials, and are subject to change by Renesas Technology Corp. without notice due to product improvements or other reasons. It is therefore recommended that customers contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor for the latest product information before purchasing a product listed herein. The information described here may contain technical inaccuracies or typographical errors. Renesas Technology Corp. assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors. Please also pay attention to information published by Renesas Technology Corp. by various means, including the Renesas Technology Corp. Semiconductor home page (http://www.renesas.com). 4. When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, please be sure to evaluate all information as a total system before making a final decision on the applicability of the information and products. Renesas Technology Corp. assumes no responsibility for any damage, liability or other loss resulting from the information contained herein. 5. Renesas Technology Corp. semiconductors are not designed or manufactured for use in a device or system that is used under circumstances in which human life is potentially at stake. Please contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor when considering the use of a product contained herein for any specific purposes, such as apparatus or systems for transportation, vehicular, medical, aerospace, nuclear, or undersea repeater use. 6. The prior written approval of Renesas Technology Corp. is necessary to reprint or reproduce in whole or in part these materials. 7. If these products or technologies are subject to the Japanese export control restrictions, they must be exported under a license from the Japanese government and cannot be imported into a country other than the approved destination. Any diversion or reexport contrary to the export control laws and regulations of Japan and/or the country of destination is prohibited. 8. Please contact Renesas Technology Corp. for further details on these materials or the products contained therein. http://www.renesas.com RENESAS SALES OFFICES Refer to "http://www.renesas.com/en/network" for the latest and detailed information. Renesas Technology America, Inc. 450 Holger Way, San Jose, CA 95134-1368, U.S.A Tel: <1> (408) 382-7500, Fax: <1> (408) 382-7501 Renesas Technology Europe Limited Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, U.K. Tel: <44> (1628) 585-100, Fax: <44> (1628) 585-900 Renesas Technology Hong Kong Ltd. 7th Floor, North Tower, World Finance Centre, Harbour City, 1 Canton Road, Tsimshatsui, Kowloon, Hong Kong Tel: <852> 2265-6688, Fax: <852> 2730-6071 Renesas Technology Taiwan Co., Ltd. 10th Floor, No.99, Fushing North Road, Taipei, Taiwan Tel: <886> (2) 2715-2888, Fax: <886> (2) 2713-2999 Renesas Technology (Shanghai) Co., Ltd. Unit2607 Ruijing Building, No.205 Maoming Road (S), Shanghai 200020, China Tel: <86> (21) 6472-1001, Fax: <86> (21) 6415-2952 Renesas Technology Singapore Pte. Ltd. 1 Harbour Front Avenue, #06-10, Keppel Bay Tower, Singapore 098632 Tel: <65> 6213-0200, Fax: <65> 6278-8001 (c) 2005. Renesas Technology Corp., All rights reserved. Printed in Japan. Colophon .2.0