ES2A THRU ES2D
SURFACE MOUNT FAST EFFICIENT PLASTIC RECTIFIER
Reverse Voltage - 50 to 200 Volts Forward Current - 2.0 Amperes
FEATURES
♦ Plastic package has Underwriters Laboratory
Flammability Classification 94V-0
♦ For surface mount applications
♦ Low profile package
♦ Built-in strain relief
♦ Ideal for automated placement
♦ Easy pick and place
♦ Glass passivated chip junction
♦ Superfast recovery times for high efficiency
♦ Low power loss, high efficiency
♦ High temperature soldering:
250°C/10 seconds at terminals
MECHANICAL DATA
Case: JEDEC DO-214AA molded plastic body
over passivated chip
Terminals: Solder plated solderable per MIL-STD-750,
Method 2026
Polarity: Color band denotes cathode end
Weight: 0.003 ounces, 0.093 gram
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
SYMBOLS ES2A ES2B ES2C ES2D UNITS
Device mar king code EA EB EC ED
Maximum repetitive peak reverse voltage VRRM 50 100 150 200 Volts
Maximum RMS voltage VRMS 35 70 105 140 Volts
Maximum DC blocking voltage VDC 50 100 150 200 Volts
Maximum average forward rectified current
at TL=110°C I(AV) 2.0 Amps
Peak forward surge current
8.3ms single half sine-wave superimposed on IFSM 50.0 Amps
rated load (JEDEC Method) at TL=110°C
Maximum instantaneous forward voltage at 2.0A VF0.90 Volts
Maximum DC reverse current TA=25°C 10.0
at rated DC blocking voltage TA=100°C IR350 µA
Maximum reverse recover y time (NOTE 1) trr 20.0 ns
Maximum reverse recover y time TJ=25°C 30.0
(NOTE 2) TJ=100°C trr 50.0 ns
Maximum stored charge TJ=25°C 10.0
(NOTE 2) TJ=100°C Qrr 25.0 nC
Typical junction capacitance (NOTE 3) CJ18.0 pF
Maximum thermal resistance (NOTE 4) RΘJA 75.0
RΘJL 20.0 °C/W
Operating junction and storage temperature range TJ, TSTG -55 to +150 °C
NOTES:
(1) Reverse recovery test conditions: IF=0.5A, IR= I.0A, lrr=0.25A
(2) Trr and Qrr measured at: IF=2.0A, VR=30V, di/dt=50A/µs, Irr=10% IR
(3) Measured at 1.0 MHZand applied reverse voltage of 4.0 Volts
(4) Units mounted on P.C.B. 5.0 x 5.0mm (0.013mm thick) land areas
0.160 (4.06)
0.180 (4.57)
0.006 (0.152)
0.012 (0.305)
0.030 (0.76)
0.060 (1.52) 0.008 (0.203)
0.205 (5.21)
0.220 (5.59)
0.084 (2.13)
0.096 (2.44)
0.077 (1.95)
0.086 (2.20)
0.130 (3.30)
0.155 (3.94)
MAX.
DO-214AA
Dimensions in inches and (millimeters)
0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8
0.01
0.1
1
10
50
10
20
30
40
50
60
1 10 100
10
20
30
40
50
60
0
80 90 100 110 120 130 140 150
0
1.0
2.0
3.0
020406080100
0.01
0.1
1
10
100
1,000
RATING AND CHARACTERISTIC CURVES ES2A THRU ES2D
FIG. 1 - MAXIMUM FORWARD CURRENT
DERATING CURVE
LEAD TEMPERATURE, °C
AVERAGE FORWARD RECTIFIED
CURRENT, AMPERES
FIG. 2 - MAXIMUM NON-REPETITIVE PEAK
FORWARD SURGE CURRENT
NUMBER OF CYCLES AT 60 HZ
PEAK FORWARD SURGE CURRENT,
AMPERES
FIG. 3 - TYPICAL INSTANTANEOUS
FORWARD CHARACTERISTICS FIG. 4 - TYPICAL REVERSE LEAKAGE
CHARACTERISTICS
INSTANTANEOUS FORWARD CURRENT,
AMPERES
INSTANTANEOUS REVERSE LEAKAGE CURRENT,
MICROAMPERES
INSTANTANEOUS FORWARD VOLTAGE,
VOLTS
PERCENT OF RATED PEAK REVERSE
VOLTAGE, %
FIG. 5 - TYPICAL JUNCTION CAPACITANCE
JUNCTION CAPACITANCE, pF
REVERSE V OLTAGE, V OLTS
8.3ms SINGLE HALF SINE-WAVE
(JEDEC Method) at TL=110°C
TJ=125°C
TJ=85°C
TJ=25°C
TJ=25°C
PULSE WIDTH=300µs
1% DUTY CYCLE
TJ=25°C
f=1.0 MHZ
Vsig=50mVp-p
RESISTIVE OR INDUCTIVE LOAD
P.C.B. MOUNTED ON
0.2 x 0.2” (5.0 x 5.0mm)
COPPER PAD AREAS
