TEN 5-2411WI - TRACO Power

http://www.tracopower.com Page 1 of 3

DC/DC Converters

TEN 5WI Series, 6 Watt

Features

◆ Ultra wide 4:1 input range

◆ DIP-24 Package with standard pinout

◆ Full SMD design

◆ Extended operating temperature range

–40°C to +85°C max.

◆ High efﬁciency

◆ Excellent load and line regulation

◆ Indeﬁnite short circuit protection

◆ I/O isolation 1500VDC

◆ Built-in Filter to meet EN 55022, Class A

and FCC, level A

◆ Lead-free design, fully RoHS compliant

◆ 3-year product warranty

The TEN 5WI series is a family of high performance dc-dc converter modules with

5 W output power, featuring ultra wide input voltage ranges of 9 - 36 VDC or

18 - 75 VDC. They come in a shielded DIP-24 metal package with industry-standard

footprint.

A high efﬁciency allows –40°C to +70°C operation ambient temperatures at full

load. Typical applications for these converters are battery operated equipment and

distributed power architectures in communication, instrumentation and industrial

electronics, everywhere where a wide input voltage range is required.

Ordercode Input voltage range Output voltage Output current max. Efﬁciency typ.

TEN 5-2410WI 3.3 VDC 1200 mA 75 %

TEN 5-2411WI 5 VDC 1000 mA 78 %

TEN 5-2412WI 12 VDC 500 mA 83 %

TEN 5-2413WI 9 – 36 VDC 15 VDC 400 mA 82 %

TEN 5-2421WI (24 VDC nominal) ±5 VDC ±500 mA 78 %

TEN 5-2422WI ±12 VDC ±250 mA 83 %

TEN 5-2423WI ±15 VDC ±200 mA 82 %

TEN 5-4810WI 3.3 VDC 1200 mA 75 %

TEN 5-4811WI 5 VDC 1000 mA 78 %

TEN 5-4812WI 18 – 75 VDC 12 VDC 500 mA 83 %

TEN 5-4813WI 15 VDC 400 mA 82 %

TEN 5-4821WI (48 VDC nominal) ±5 VDC ±500 mA 78 %

TEN 5-4822WI ±12 VDC ±250 mA 83 %

TEN 5-4823WI ±15 VDC ±200 mA 82 %

Models

UL 60950 -1

C B

Scheme

http://www.tracopower.com Page 2 of 3

All speciﬁcations valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.

DC/DC Converters

TEN 5WI Series 6 Watt

Input Specifications

Input current no load 24 Vin models 20 mA typ.

48 Vin models 10 mA typ.

Start-up voltage / 24 Vin models 9 VDC / 8.5 VDC typ.

under voltage shut down 48 Vin models 18 VDC / 16 VDC typ.

Surge voltage (1 sec. max.) 24 Vin models 50 V max.

48 Vin models 100 V max.

Reverse voltage protection 1.0 A max.

Conducted noise (input) EN 55022 level A, FCC part 15, level A

Output Specifications

Voltage set accuracy ±2.0 % max.

Regulation – Input variation Vin min. to Vin max. ±0.5 % max.

– Load variation 10 – 100 %

single output models 1.0 % max.

dual output models 1.0 % max. balanced load

25 – 100 % 5.0 % max. unbalanced load

Ripple and noise (20 MHz Bandwidth) 80 mVpk-pk max

Temperature coefficient ±0.02 %/K

Current limitation >110 % of Iout max., constant current

Short circuit protection indefinite (automatic recovery)

Capacitive load 3.3 / 5 VDC models 470 µF max.

12 / 15 VDC models 100 µF max.

dual output models 100 µF max.

General Specifications

Temperature ranges – Operating –40°C to +85°C

– Case temperature +100°C max.

– Storage –40°C to +125°C

Derating 3.5 %/K above +70°C

Humidity (non condensing) 95 % rel H max.

Reliability, calculated MTBF ( M I L- H D B K-217F, at +25°C, ground benign) >800’000 h

Isolation voltage (60 sec.) – Input/Output 1’500 VDC

Isolation capacitance – Input/Output 1000 pF typ

Isolation resistance – Input/Output (500 VDC) >1‘000 M Ohm

Switching frequency 450 kHz typ. (Pulse frequency modulation PFM)

Safety standards cUL/UL 60950-1 , IEC/EN 60950-1

Environmental compliance – Reach www.tracopower.com/info/reach-declaration.pdf

– RoHS directive 2011/65/EU

Page 3 of 3

Speciﬁcations can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com

www.tracopower.com

DC/DC Converters

TEN 5WI Series 6 Watt

Physical Specifications

Casing material black anodized aluminium

Baseplate material non conductive FR4

Potting material epoxy (UL 94V-0 rated)

Weight 17 g (0.49 oz)

Soldering temperature max. 260°C / 10 sec.

Outline Dimensions

Insulated Baseplate

22.86

20.3

4.5

31.8

10.2

4.1

15.24

23 2

Bottom view

2.54

15.24

2.4

5.08

(0.6)

(0.8)

(0.1)

(0.4)

(0.16)

(1.25)

(0.9) (0.18)

(0.1)

(0.2)

(0.6)

Pin Single Dual

2–Vin (GND) –Vin (GND)

3–Vin (GND) –Vin (GND)

9No pin Common

11 No function –Vout

14 +Vout +Vout

16 –Vout Common

22 +Vin (Vcc) +Vin (Vcc)

23 +Vin (Vcc) +Vin (Vcc)

Pin-Out

Rev. July 13, 2018

Dimensions in [mm], () = Inch

Pin diameter ø 0.5 ±0.05 (0.02 ±0.002)

Tolerances ±0.5 (±0.02)

Pin pitch tolerances ±0.35 (±0.014)

Supporting documents: www.tracopower.com/overview/ten5wi

Mouser Electronics

Authorized Distributor

Click to View Pricing, Inventory, Delivery & Lifecycle Information:

TRACO Power:

TEN 5-4811WI TEN 5-2411WI TEN 5-4823WI TEN 5-2421WI TEN 5-4812WI TEN 5-2422WI TEN 5-2423WI TEN

5-2410WI TEN 5-4810WI TEN 5-2413WI TEN 5-2412WI TEN 5-4821WI TEN 5-4813WI TEN 5-4822WI