Web page Tools & software Sample & buy Support & FAQ Document 347 -1 Chip Inductors - 0402PA (1005) With current ratings as high as 1.8 A, Coilcraft's 0402PA wirewound chip inductors are ideal for power amplifiers in TDMA, CDMA, GSM and other wireless applications. Compared to our standard 0402CS Series, they can handle up to 65% more current and have half the DC resistance. These inductors are perfect for use as an RF choke for the power supply, the LC tank between ampli Inductance2 Part number1 0402PA-0N8XJE_ 0402PA-1N9X_E_ 0402PA-3N4X_E_ 0402PA-3N5X_E_ 0402PA-5N8X_E_ 0402PA-6N2X_E_ 0402PA-8N2X_E_ (nH) 0.78 1.9 3.4 3.5 5.8 6.2 8.2 Percent tolerance3 5 5,2 5,2 5,2 5,2 5,2 5,2 fier and antenna and in the amplifier bias circuit. Like our other ceramic chip inductors, they feature outstanding selfresonant frequencies and excellent Q values. Most values are available in 2% inductance tolerance. Coilcraft Designer's Kit C373 contains samples of all 5% inductance tolerance parts. To order, contact Coilcraft or visit http://order.coilcraft.com. 900 MHz L typ Q typ4 0.79 35 1.83 50 3.36 51 3.51 58 5.76 56 6.17 57 8.15 58 1. When ordering, specify tolerance, termination and packaging codes: 0402PA-8N2XJEW Tolerance: G = 2% J = 5% Termination: E = Halogen free component. RoHS compliant silverpalladium-platinum-glass frit terminations. L = RoHS compliant, not halogen-free. Silver-palladiumplatinum-glass frit terminations. Special order: T = RoHS tin-silver-copper (95.5/4/0.5) or S = non-RoHS tin-lead (63/37) Packaging: W = 7 machine-ready reel. EIA-481 punched paper tape (2000 parts per full reel). U = Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter W instead. 2. Inductance measured at 250 MHz using a Coilcraft SMD-F test fixture and Coilcraft-provided correlation pieces with an Agilent/HP 4286 impedance analyzer. 3. Tolerances in bold are stocked for immediate shipment. 4. Q measured using an Agilent/HP 4291A with an Agilent/HP 16193 test fixture. 5. For SRF >6 GHz, measured using an Agilent/HP 8722ES network analyzer and a Coilcraft SMDD test fixture. For SRF 6 GHz, measured using anAgilent/HP 8753D network analyzer and a Coilcraft SMDD test fixture. 6. DCR measured on a micro-ohmmeter. 7. Current that causes a 15C temperature rise from 25C ambient. This information is for reference only and does not represent absolute maximum ratings. 8. Electrical specifications at 25C. Refer to Doc 362 "Soldering Surface Mount Components" before soldering. 1.7 GHz L typ Q typ4 0.76 55 1.81 73 3.33 93 3.55 82 5.70 83 6.28 81 8.19 82 SRF typ5 (MHz) 15200 12500 7200 8750 5450 4950 4650 DCR typ6 (Ohms) 0.018 0.022 0.030 0.040 0.045 0.055 0.060 Irms7 (mA) 1860 1700 1500 1400 1300 1150 1100 Core material Ceramic Environmental RoHS compliant, halogen free Terminations Silver-palladium-platinum-glass frit. Other terminations available at additional cost. Weight 0.9 - 1.1 mg Ambient temperature -40C to +125C with Irms current Maximum part temperature +140C (ambient + temp rise). Storage temperature Component: -40C to +140C. Tape and reel packaging: -40C to +80C Resistance to soldering heat Max three 40 second reflows at +260C, parts cooled to room temperature between cycles Temperature Coefficient of Inductance (TCL) +25 to +125 ppm/C Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30C / 85% relative humidity) Failures in Time (FIT) / Mean Time Between Failures (MTBF) One per billion hours / one billion hours, calculated per Telcordia SR-332 Packaging 2000 per 7 reel. Paper tape: 8 mm wide, 0.68 mm thick, 2 mm pocket spacing PCB washing Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. See Doc787_PCB_Washing.pdf.. US +1-847-639-6400 sales@coilcraft.com UK +44-1236-730595 sales@coilcraft-europe.com Taiwan +886-2-2264 3646 sales@coilcraft.com.tw China +86-21-6218 8074 sales@coilcraft.com.cn Singapore + 65-6484 8412 sales@coilcraft.com.sg Document 347-1 Revised 10/03/08 (c) Coilcraft Inc. 2017 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information. Document 347-2 0402PA Series (1005) Typical Q vs Frequency Typical L vs Frequency 100 10 3.4 nH 90 5.8 nH 80 8.2 nH 8 8.2 nH 3.5 nH 60 50 0.8 nH 40 30 Inductance (nH) 6.2 nH 70 Q Factor 9 1.9 nH 7 6.2 nH 5.8 nH 6 5 4 3.5 nH 3.4 nH 3 20 2 1.9 nH 10 1 0.8 nH 0 0 1 10 100 1000 10000 1 Frequency (MHz) D F B max Pick and place material 1000 10000 H I G J F I Terminal wraparound: approx 0.007/0,18 both ends E terminal A max 100 Frequency (MHz) C B overall A 10 C max D ref E F G Recommended Land Pattern H I J 0.047 0.025 0.026 0.010 0.020 0.009 0.022 0.026 0.014 0.018 inches 1,19 0,64 0,66 0,25 0,51 0,23 0,56 0,66 0,36 0,46 mm Note: Height dimension (C) is before optional solder application. For maximum height dimension including solder, add 0.006 in / 0,152 mm. US +1-847-639-6400 sales@coilcraft.com UK +44-1236-730595 sales@coilcraft-europe.com Taiwan +886-2-2264 3646 sales@coilcraft.com.tw China +86-21-6218 8074 sales@coilcraft.com.cn Singapore + 65-6484 8412 sales@coilcraft.com.sg Document 347-2 Revised 10/03/08 (c) Coilcraft Inc. 2017 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information. Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Coilcraft: 0402PA-5N8XGLU 0402PA-8N2XGLW 0402PA-5N8XGLW 0402PA-3N5XGLU 0402PA-6N2XJLW 0402PA6N2XJLU 0402PA-1N9XGLW 0402PA-3N5XGLW 0402PA-0N8XJLU 0402PA-6N2XGLU 0402PA-3N4XGLW 0402PA-5N8XJLW 0402PA-8N2XJLU 0402PA-3N5XJLW 0402PA-3N5XJLU 0402PA-3N4XGLU 0402PA-5N8XJLU 0402PA-3N4XJLW 0402PA-3N4XJLU 0402PA-0N8XJLW 0402PA-6N2XGLW 0402PA-1N9XJLU 0402PA-1N9XGLU 0402PA-8N2XGLU 0402PA-1N9XJLW 0402PA-8N2XJLW