0402PA-6N2XGLW - Coilcraft

Taiwan

China

Singapore

+1-847-639-6400 sales@coilcraft.com

+44-1236-730595 sales@coilcraft-europe.com

+886-2-2264 3646 sales@coilcraft.com.tw

+86-21-6218 8074 sales@coilcraft.com.cn

+ 65-6484 8412 sales@coilcraft.com.sg

This product may not be used in medical or high

risk applications without prior Coilcraft appr

oval.

Specification subject to change without notice.

Please check web site for latest infor

mation.

Sample

& buy

Support

& FAQ

Web

page

Tools &

softw

are

Chip Inductors

–

0402PA (1005)

Document 347 -1

Document 347-1 Revised 10/03/08

Inductance2 Percent 900 MHz 1.7 GHz SRF typ5 DCR typ6 Irms7

Part number1 (nH)

tolerance3 L typ Q typ4 L typ Q typ4 (MHz) (Ohms) (mA)

0402PA-0N8XJE_ 0.78 5 0.79 35 0.76 55 15200 0.018 1860

0402PA-1N9X_E_ 1.9 5,2 1.83 50 1.81 73 12500 0.022 1700

0402PA-3N4X_E_ 3.4 5,2 3.36 51 3.33 93 7200 0.030 1500

0402PA-3N5X_E_ 3.5 5,2 3.51 58 3.55 82 8750 0.040 1400

0402PA-5N8X_E_ 5.8 5,2 5.76 56 5.70 83 5450 0.045 1300

0402PA-6N2X_E_ 6.2 5,2 6.17 57 6.28 81 4950 0.055 1150

0402PA-8N2X_E_ 8.2 5,2 8.15 58 8.19 82 4650 0.060 1100

1. When ordering, specify tolerance, termination and packaging codes:

0402PA-8N2XJEW

Tolerance: G = 2% J = 5%

Termination: E = Halogen free component. RoHS compliant silver-

palladium-platinum-glass frit terminations.

L = RoHS compliant, not halogen-free. Silver-palladium-

platinum-glass frit terminations.

Special order: T = RoHS tin-silver-copper (95.5/4/0.5)

or S = non-RoHS tin-lead (63/37)

Packaging: W = 7″ machine-ready reel. EIA-481 punched paper

tape (2000 parts per full reel).

U = Less than full reel. In tape, but not machine ready.

To have a leader and trailer added ($25 charge),

use code letter W instead.

2. Inductance measured at 250 MHz using a Coilcraft SMD-F test ﬁxture

and Coilcraft-provided correlation pieces with an Agilent/HP 4286 imped-

ance analyzer.

3. Tolerances in bold are stocked for immediate shipment.

4. Q measured using an Agilent/HP 4291A with an Agilent/HP 16193 test

ﬁxture.

5. For SRF >6 GHz, measured using an Agilent/HP 8722ES network

analyzer and a Coilcraft SMD-D test ﬁxture. For SRF £6 GHz, measured

using anAgilent/HP 8753D network analyzer and a Coilcraft SMD-D test

ﬁxture.

6. DCR measured on a micro-ohmmeter.

7. Current that causes a 15°C temperature rise from 25°C ambient. This

information is for reference only and does not represent absolute maxi-

mum ratings.

8. Electrical speciﬁcations at 25°C.

Refer to Doc 362 “Soldering Surface Mount Components” before soldering.

With current ratings as high as 1.8 A, Coilcraft’s 0402PA

wirewound chip inductors are ideal for power ampliﬁers

in TDMA, CDMA, GSM and other wireless applications.

Compared to our standard 0402CS Series, they can

handle up to 65% more current and have half the DC

resistance. These inductors are perfect for use as an RF

choke for the power supply, the LC tank between ampli-

ﬁer and antenna and in the ampliﬁer bias circuit. Like our

other ceramic chip inductors, they feature outstanding self-

resonant frequencies and excellent Q values. Most values

are available in 2% inductance tolerance.

Coilcraft Designer’s Kit C373 contains samples of all 5%

inductance tolerance parts. To order, contact Coilcraft or

visit http://order.coilcraft.com.

Core material Ceramic

Environmental RoHS compliant, halogen free

Terminations Silver-palladium-platinum-glass frit. Other termina-

tions available at additional cost.

Weight 0.9 – 1.1 mg

Ambient temperature –40°C to +125°C with Irms current

Maximum part temperature +140°C (ambient + temp rise).

Storage temperature Component: –40°C to +140°C.

Tape and reel packaging: –40°C to +80°C

Resistance to soldering heat Max three 40 second reﬂows at

+260°C, parts cooled to room temperature between cycles

Temperature Coefﬁcient of Inductance (TCL) +25 to +125 ppm/°C

Moisture Sensitivity Level (MSL) 1 (unlimited ﬂoor life at <30°C /

85% relative humidity)

Failures in Time (FIT) / Mean Time Between Failures (MTBF)

One per billion hours / one billion hours, calculated per Telcordia SR-332

Packaging 2000 per 7″ reel. Paper tape: 8 mm wide, 0.68 mm thick,

2 mm pocket spacing

PCB washing Tested to MIL-STD-202 Method 215 plus an additional

aqueous wash. See Doc787_PCB_Washing.pdf..

Taiwan

China

Singapore

+1-847-639-6400 sales@coilcraft.com

+44-1236-730595 sales@coilcraft-europe.com

+886-2-2264 3646 sales@coilcraft.com.tw

+86-21-6218 8074 sales@coilcraft.com.cn

+ 65-6484 8412 sales@coilcraft.com.sg

This product may not be used in medical or high

risk applications without prior Coilcraft appr

oval.

Specification subject to change without notice.

Please check web site for latest infor

mation.

0402PA Series (1005)

Document 347-2 Revised 10/03/08

Document 347-2

Typical L vs FrequencyTypical Q vs Frequency

110 100 1000

10000

Frequency (MHz)

Inductance (nH)

3.4 nH

5.8 nH

8.2 nH

0.8 nH

1.9 nH

3.5 nH

6.2 nH

110 100 1000

10000

Frequency (MHz)

100

Q Factor

3.4 nH

5.8 nH

8.2 nH

0.8 nH

1.9 nH

3.5 nH

6.2 nH

A B C D

max max max ref E F G H I J

0.047 0.025 0.026 0.010 0.020 0.009 0.022 0.026 0.014 0.018 inches

1,19 0,64 0,66 0,25 0,51 0,23 0,56 0,66 0,36 0,46 mm

overall

Recommended

Land Pattern

terminal

Terminal wraparound:

approx 0.007/0,18 both ends

Pick and

place

material

Note: Height dimension (C) is before optional solder application. For maximum

height dimension including solder, add 0.006 in / 0,152 mm.