Features Applications 4.5 mm SMD Fast tripping resettable circuit protection Surface mount packaging for automated assembly Reduced component size and resistance Agency recognition: High Density Circuit Board Applications: Hard disk drives PC motherboards PC peripherals Point-of-sale (POS) equipment PCMCIA cards MF-MSMD Series - PTC Resettable Fuses Electrical Characteristics Ihold Model MF-MSMD010 MF-MSMD014 MF-MSMD020 NEW! MF-MSMD030 MF-MSMD050 MF-MSMD075 NEW! MF-MSMD075/24 MF-MSMD110 NEW! MF-MSMD110/16 MF-MSMD125 MF-MSMD150 MF-MSMD160 MF-MSMD200 MF-MSMD260 V max. Volts I max. Amps 60.0 60.0 30.0 30.0 15.0 13.2 24.0 6.0 16.0 6.0 6.0 8.0 6.0 6.0 40 40 80 10 100 100 40 100 100 100 100 100 100 100 Itrip Amperes at 23 C Hold Trip 0.10 0.14 0.20 0.30 0.50 0.75 0.75 1.10 1.10 1.25 1.50 1.60 2.00 2.60 0.30 0.34 0.40 0.60 1.00 1.50 1.50 2.20 2.20 2.50 3.00 2.80 4.00 5.20 Resistance Ohms at 23 C RMin. R1Max. 0.70 0.40 0.40 0.30 0.15 0.11 0.11 0.04 0.04 0.035 0.03 0.035 0.020 0.015 15.00 6.50 6.00 3.00 1.00 0.45 0.45 0.21 0.21 0.14 0.120 0.099 0.100 0.080 Max. Time To Trip Amperes at 23 C Seconds at 23 C 0.5 1.5 6.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 1.5 0.15 0.06 0.10 0.15 0.20 0.20 0.30 0.30 0.4 0.5 2.0 3.0 5.0 Tripped Power Dissipation Watts at 23 C Max. 1.0 1.0 1.0 1.2 1.2 1.2 1.2 1.2 1.2 1.5 1.5 1.5 1.5 1.5 Environmental Characteristics Operating/Storage Temperature ........................-40 C to +85 C Maximum Device Surface Temperature in Tripped State ................................................125 C Passive Aging......................................................+85 C, 1000 hours ....................................5 % typical resistance change Humidity Aging....................................................+85 C, 85 % R.H. 1000 hours....................5 % typical resistance change Thermal Shock ....................................................+85 C to -40 C, 20 times ..........................10 % typical resistance change Solvent Resistance ............................................MIL-STD-202, Method 215 ........................No change Vibration ..............................................................MIL-STD-883C, Method 2007.1, ................No change Condition A Test Procedures And Requirements For Model MF-MSMD Series Test Test Conditions Accept/Reject Criteria Visual/Mech.....................................Verify dimensions and materials ....................................Per MF physical description Resistance ......................................In still air @ 23 C ............................................................Rmin R R1max Time to Trip ....................................At specified current, Vmax, 23 C ..................................T max. time to trip (seconds) Hold Current....................................30 min. at Ihold ..............................................................No trip Trip Cycle Life ................................Vmax, Imax, 100 cycles ..................................................No arcing or burning Trip Endurance ................................Vmax, 48 hours ..............................................................No arcing or burning Solderability ....................................MIL-STD-202F, Method 208F..........................................95 % min. coverage UL File Number ..................................E174545 http://www.ul.com/ Follow link to Certifications, then UL File No., enter E174545 CSA File Number ................................CA110338 http://directories.csa-international.org/ Under "Certification Record" and "File Number" enter 110338-0-000 TUV Certificate Number......................R 02057213 http://www.tuvdotcom.com/ Follow link to "other certificates", enter File No. 2057213 Specifications are subject to change without notice. Additional Features Patents pending MF-MSMD Series - PTC Resettable Fuses Product Dimensions A Model Min. 4.37 (0.172) 4.37 (0.172) 4.37 (0.172) 4.37 (0.172) 4.37 (0.172) 4.37 (0.172) 4.37 (0.172) 4.37 (0.172) 4.37 (0.172) 4.37 (0.172) 4.37 (0.172) 4.37 (0.172) 4.37 (0.172) 4.37 (0.172) MF-MSMD010 MF-MSMD014 MF-MSMD020 MF-MSMD030 MF-MSMD050 MF-MSMD075 MF-MSMD075/24 MF-MSMD110 MF-MSMD110/16 MF-MSMD125 MF-MSMD150 MF-MSMD160 MF-MSMD200 MF-MSMD260 B Max. 4.73 (0.186) 4.73 (0.186) 4.73 (0.186) 4.73 (0.186) 4.73 (0.186) 4.73 (0.186) 4.73 (0.186) 4.73 (0.186) 4.73 (0.186) 4.73 (0.186) 4.73 (0.186) 4.73 (0.186) 4.73 (0.186) 4.73 (0.186) Min. 3.07 (0.121) 3.07 (0.121) 3.07 (0.121) 3.07 (0.121) 3.07 (0.121) 3.07 (0.121) 3.07 (0.121) 3.07 (0.121) 3.07 (0.121) 3.07 (0.121) 3.07 (0.121) 3.07 (0.121) 3.07 (0.121) 3.07 (0.121) C Max. 3.41 (0.134) 3.41 (0.134) 3.41 (0.134) 3.41 (0.134) 3.41 (0.134) 3.41 (0.134) 3.41 (0.134) 3.41 (0.134) 3.41 (0.134) 3.41 (0.134) 3.41 (0.134) 3.41 (0.134) 3.41 (0.134) 3.41 (0.134) Min. 0.56 (0.022) 0.56 (0.022) 0.56 (0.022) 0.56 (0.022) 0.38 (0.015) 0.38 (0.015) 0.38 (0.015) 0.38 (0.015) 0.38 (0.015) 0.30 (0.012) 0.30 (0.012) 0.30 (0.012) 0.30 (0.012) 0.25 (0.010) Max. 0.81 (0.032) 0.81 (0.032) 0.81 (0.032) 0.81 (0.032) 0.62 (0.024) 0.62 (0.024) 0.62 (0.024) 0.62 (0.024) 0.62 (0.024) 0.48 (0.019) 0.48 (0.019) 0.48 (0.019) 0.48 (0.019) 0.48 (0.019) Packaging: 2000 pcs. per reel. Top and Bottom View UNIT = Side View A MM (INCHES) Solder Reflow Recommendations C 300 Preheating Soldering Cooling 10-20 120 250 Temperature (C) B D Recommended Pad Layout 1.5 0.05 (.059 .002) D Min. 0.30 (0.012) 0.30 (0.012) 0.30 (0.012) 0.30 (0.012) 0.30 (0.012) 0.30 (0.012) 0.30 (0.012) 0.30 (0.012) 0.30 (0.012) 0.30 (0.012) 0.30 (0.012) 0.30 (0.012) 0.30 (0.012) 0.30 (0.012) 1.5 0.05 (.059 .002) 3.2 0.1 (0.126 .004) 2.70 0.1 (.106 .004) Terminal material: solder-plated copper Termination pad solderability: Meets EIA Specification RS-186-9E, ANSI/J-STD-002 Category 3. 200 150 100 50 0 160-220 Time (seconds) Note: * If reflow temperatures exceed the recommended profile, devices may not meet the performance requirements. Specifications are subject to change without notice. MF-MSMD Series - PTC Resettable Fuses How to Order Typical Time to Trip at 23 C MF - MSMD 075/24 - 2 100 Multifuse(R) Product Designator MF-MSMD200 Series MSMD = 4.5 mm Surface Mount Component Time to Trip (Seconds) 10 Hold Current, Ihold 010-260 (0.10 Amps - 2.60 Amps) MF-MSMD030 Max. Voltage, V Packaging Packaged per EIA 481-1 -2 = Tape and Reel 1 Typical Part Marking 0.1 MF-MSMD260 MF-MSMD014 0.01 MF-MSMD150 MF-MSMD125 MF-MSMD110 MF-MSMD075 MF-MSMD110/16 MF-MSMD020 MF-MSMD075/24 MF-MSMD050 0.001 1 0.1 Represents total content. Layout may vary. MF-MSMD160 10 PART IDENTIFICATION MANUFACTURER'S TRADEMARK 075 0A DATE CODE WEEK 1 OF 2000 = 0A (YEAR & WEEK) WEEK 27 OF 2000 = A0 (WEEK & YEAR) 100 Fault Current (Amps) Thermal Derating Chart - Ihold / Itrip (Amps) Ambient Operating Temperature Model MF-MSMD010 MF-MSMD014 MF-MSMD020 MF-MSMD030 MF-MSMD050 MF-MSMD075 MF-MSMD075/24 MF-MSMD110 MF-MSMD110/16 MF-MSMD125 MF-MSMD150 MF-MSMD160 MF-MSMD200 MF-MSMD260 -40 C 0.16 / 0.32 0.23 / 0.52 0.29 / 0.58 0.44 / 0.88 0.77 / 1.54 1.15 / 2.30 1.11 / 2.22 1.59 / 3.18 1.59 / 3.18 1.80 / 3.61 2.17 / 4.34 2.30 / 5.00 3.08 / 6.14 4.00 / 7.98 -20 C 0.14 / 0.28 0.19 / 0.45 0.26 / 0.52 0.39 / 0.78 0.68 / 1.36 1.01 / 2.02 1.00 / 2.00 1.43 / 2.86 1.43 / 2.86 1.63 / 3.25 1.95 / 3.90 2.20 / 4.40 2.71 / 5.39 3.52 / 7.01 MF-MSMD SERIES, REV. M, 07/02 Specifications are subject to change without notice. 0 C 0.12 / 0.24 0.17 / 0.40 0.23 / 0.46 0.35 / 0.70 0.59 / 1.18 0.88 / 1.76 0.85 / 1.70 1.26 / 2.52 1.26 / 2.52 1.43 / 2.86 1.72 / 3.44 1.90 / 3.80 2.35 / 4.62 3.06 / 6.09 23 C 0.11 / 0.22 0.14 / 0.34 0.20 / 0.40 0.30 / 0.60 0.50 / 1.00 0.75 / 1.50 0.75 / 1.50 1.10 / 2.20 1.10 / 2.20 1.25 / 2.50 1.50 / 3.00 1.60 / 2.80 2.00 / 4.01 2.60 / 5.15 40 C 0.08 / 0.16 0.12 / 0.29 0.17 / 0.34 0.26 / 0.52 0.44 / 0.88 0.65 / 1.30 0.67 / 1.34 0.95 / 1.90 0.95 / 1.90 1.08 / 2.16 1.30 / 2.59 1.45 / 2.90 1.80 / 1.61 2.34 / 4.64 50 C 0.07 / 0.14 0.10 / 0.25 0.15 / 0.30 0.23 / 0.46 0.40 / 0.80 0.60 / 1.20 0.61 / 1.22 0.87 / 1.74 0.87 / 1.74 0.99 / 1.98 1.18 / 2.37 1.30 / 2.60 1.60 / 3.19 2.08 / 4.13 60 C 0.06 / 0.12 0.09 / 0.23 0.14 / 0.28 0.21 / 0.42 0.37 / 0.74 0.55 / 1.10 0.52 / 1.06 0.80 / 1.60 0.80 / 1.60 0.91 / 1.82 1.09 / 2.18 1.15 / 2.30 1.50 / 2.98 1.95 / 3.87 70 C 0.05 / 0.10 0.08 / 0.21 0.12 / 0.24 0.18 / 0.36 0.33 / 0.66 0.49 / 0.98 0.50 / 1.00 0.71 / 1.42 0.71 / 1.42 0.81 / 1.62 0.97 / 1.94 1.03 / 2.06 1.07 / 2.12 1.39 / 2.74 85 C 0.03 / 0.06 0.06 / 0.16 0.10 / 0.20 0.15 / 0.30 0.29 / 0.58 0.43 / 0.86 0.42 / 0.84 0.60 / 1.20 0.60 / 1.20 0.68 / 1.36 0.82 / 1.64 0.91 / 1.82 0.80 / 1.58 1.04 / 2.05 MF-MSMD, MF-USMD & MF-ESMD Series Tape and Reel Specs MF-MSMD Series per EIA-481-1 MF-USMD Series per EIA 481-1 MF-ESMD Series per EIA 481-2 W 12.0 0.30 (0.472 0.012) 8.0 0.30 (0.315 0.012) 24.0 0.3 (0.945 0.012) P0 4.0 0.10 (0.157 0.004) 4.0 0.10 (0.157 0.004) 4.0 0.1 (0.157 0.004) Tape Dimensions P2 8.0 0.10 (0.315 0.004) 2.0 0.05 (0.079 0.002) A0 3.66 0.15 (0.144 0.006) B0 4.98 0.10 (0.196 0.004) P1 4.0 0.10 (0.157 0.004) 2.0 0.05 (0.079 0.002) MF-USMD005,010,020: MF-USMD035,050,075,110: 2.76 0.10 2.93 0.15 (0.109 0.004) (0.115 0.006) MF-USMD005,010,020: 3.5 0.1 (0.138 0.004) 5.9 (0.232) 1.5 + 0.10/-0.00 (0.059 + 0.004/-0) 5.5 0.05 (0.217 0.002) 1.75 0.10 (0.069 0.004) B1 max. D0 F E1 10.25 (0.404) 0.6 (0.024) 0.1 (0.004) E2 min. T max. T1 max. 0.95 0.10 (0.037 0.004) K0 Leader min. Trailer min. 8.0 0.1 (0.315 0.004) 2.0 0.1 (0.079 0.004) 5.65 0.1 (0.222 0.004) MF-USMD035,050,075,110: 3.56 0.1 (0.140 0.004) 11.86 0.1 (0.467 0.004) 20.1 (0.791) 1.5 + 0.1/-0.0 (0.059 + 0.004/-0) 11.5 0.10 (0.453 0.004) 1.75 0.10 (0.069 0.004) 4.35 (0.171) 1.50 + 0.1/-0.0 (0.059 + 0.004/-0) 3.5 0.05 (0.138 0.002) 1.75 0.10 (0.069 0.004) 6.25 (0.246) 0.6 (0.024) 22.25 (0.876) 0.6 (0.024) 0.1 (0.004) 0.1 (0.004) MF-USMD005,010,020: MF-USMD035,050,075,110: 0.75 0.10 1.07 0.10 (0.030 0.004) (0.042 0.004) 0.85 0.1 (0.033 0.004) 390 (15.35) 160 (6.30) 390 (15.35) 160 (6.30) 390 (15.35) 160 (6.30) 185 (7.28) 50 (1.97) 185 (7.28) 50 (1.97) 8.4 + 1.5/-0.0 (0.331 + 0.059/-0) 14.4 (0.567) 360 (14.17) 60 (2.36) Reel Dimensions A max. N min. 12.4 + 2.0/-0.0 (0.488 + 0.079/-0.0) 18.4 (0.724) W1 W2 max. UNIT = P0 T D0 24.4 + 2.0/ -0.0 (0.961 + 0.079/-0) 30.4 (1.20) P2 MM (INCHES) E1 W2(MEASURED AT HUB) COVER TAPE F E2 W B1 A N(HUB DIA.) B0 K0 T1 P1 A0 W1(MEASURED AT HUB) Specifications are subject to change without notice.