Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Conductive Polymer Aluminum Electrolytic Capacitors
W2
W1
L
P
W2
P
H
+
–
Cap. Polarity bar (Positive)
R.V. codeLot No.
● Endurance 125 °C 1000 h
● High voltage & Large capacitance (2 V.DC 560 µF to 25 V.DC 33 µF)
● Low ESR (4.5 mΩ max.)
● RoHS compliance, Halogen free
Surface Mount Type
Series : HX (Guaranteed at 125 °C)
Features
Speci cations
Series HX
Category temp. range
–55 °C to +125 °C
Rated voltage range 2 V.DC to 2.5 V.DC, 10 V.DC to 25 V.DC
Category voltage range
1.6 V.DC to 2 V.DC, 8 V.DC to 20 V.DC
Nominal cap.range 15 µF to 560 µF
Capacitance tolerance
±20 % (120 Hz/+20 °C)
DC leakage cur rent 2 V.DC to 2.5 V.DC : I < 0.1 CV (A) 2 minutes, 10 V.DC to 25 V.DC : I < 0.3 CV (A) 2 minutes
Dissipation factor (tan d)
< 0.1 (120 Hz/+20 °C)
Surge voltage (V.DC) Rated voltage × 1.25 [2 V.DC to 16 V.DC], × 1.15 [20 V.DC to 25 V.DC](15 °C to 35 °C)
Endurance
+125 °C, 1000 h, Category voltage applied
Capacitance change Within ±20 % of the initial value
tan d< 2 times of the initial limit
DC leakage cur rent Within the initial limit
Damp heat
(Steady state)
After storing for 500 hours at +60 °C, 90 %
Capacitance change of
initial measurd val ue
2 V.DC to 2.5 V.DC 10 V.DC to 25 V.DC
+70 %, –20 % +60 %, –20 %
tan d< 2 times of the initial limit
DC leakage current 2 V.DC to 2.5 V.DC : Within the initial limit
10 V.DC to 25V DC : < 3 times of the initial limit
Unit : mm
Series L±0.2 W1±0.2 W2±0.1 H±0.1 P±0.3
HX 7.3 4.3 2.4 1.9 1.3
✽ Externals of fi gure are the reference.
Rated voltage mark
d 2 V.DC
e 2.5 V.DC
A 10 V.DC
C 16 V.DC
D 20 V.DC
E 25 V.DC
Marking Dimensions (not to scale)
Mar. 201805
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Conductive Polymer Aluminum Electrolytic Capacitors
Reflow ✽3<Standard>
Characteristics list
✽1: Ripple current (100 kHz/ +45°C ), ✽2: ESR (100 kHz/+20 °C)
✽3: Please refer to the page of “Mounting Specifi cations”.
✽4: Please contact us when 500 pcs packing is necessary.
Series
Rated
voltage
[105 °C]
(V.DC)
Category
voltage
[125 °C]
(V.DC)
Capacitance
(±20 %)
(µF)
Case size (mm) Specifi cation
Part number
Min.✽4
Packaging
Q’ty
(pcs)
LWH
✽1
Ripple
current
(mAr.m.s.)
✽2
ESR
(mΩ max.)
HX
2 1.6
470
7.3 4.3 1.9 5100 15 EEFHX0D471R 3500
7.3 4.3 1.9 6300 9 EEFHX0D471R9 3500
7.3 4.3 1.9 7500 6 EEFHX0D471R6 3500
7.3 4.3 1.9 8500 4.5 EEFHX0D471R4 3500
560 7.3 4.3 1.9 5100 15 EEFHX0D561R 3500
7.3 4.3 1.9 8500 4.5 EEFHX0D561R4 3500
2.5 2
330
7.3 4.3 1.9 5100 15 EEFHX0E331R 3500
7.3 4.3 1.9 6300 9 EEFHX0E331R9 3500
7.3 4.3 1.9 7500 6 EEFHX0E331R6 3500
7.3 4.3 1.9 8500 4.5 EEFHX0E331R4 3500
470
7.3 4.3 1.9 5100 15 EEFHX0E471R 3500
7.3 4.3 1.9 6300 9 EEFHX0E471R9 3500
7.3 4.3 1.9 7500 6 EEFHX0E471R6 3500
7.3 4.3 1.9 8500 4.5 EEFHX0E471R4 3500
10 8
47 7.3 4.3 1.9 3200 40 EEFHX1A470R 3500
68 7.3 4.3 1.9 3200 40 EEFHX1A680R 3500
100 7.3 4.3 1.9 3200 40 EEFHX1A101R 3500
16 12.8
15 7.3 4.3 1.9 3200 40 EEFHX1C150R 3500
22 7.3 4.3 1.9 3200 40 EEFHX1C220R 3500
33 7.3 4.3 1.9 3200 40 EEFHX1C330R 3500
47 7.3 4.3 1.9 3200 40 EEFHX1C470R 3500
68 7.3 4.3 1.9 3200 40 EEFHX1C680R 3500
20 16
22 7.3 4.3 1.9 3200 40 EEFHX1D220R 3500
33 7.3 4.3 1.9 3200 40 EEFHX1D330R 3500
47 7.3 4.3 1.9 3200 40 EEFHX1D470R 3500
56 7.3 4.3 1.9 3200 40 EEFHX1D560R 3500
25 20
15 7.3 4.3 1.9 3200 40 EEFHX1E150R 3500
22 7.3 4.3 1.9 3200 40 EEFHX1E220R 3500
33 7.3 4.3 1.9 3200 40 EEFHX1E330R 3500
Ripple current should be controlled so that surface temperature of capacitor does not exceed the category temperature.
Temp. T < 45 °C 45 °C < T < 85 °C 85 °C < T < 105 °C
105 °C < T < 125 °C
2 V.DC to 2.5 V.DC Coeffi cient 1.0 0.7 0.25 0.25
10 V.DC to 25 V.DC 1.0 0.8 0.5 0.25
Temperature compensation multipliers for ripple current
Mar. 201805
■ If you want to use our products described in this online catalog for applications requiring
special qualities or reliability, or for applications where the failure or malfunction of the
products may directly jeopardize human life or potentially cause personal injury
(e.g. aircraft and aerospace equipment, traffic and transportation equipment, combustion
equipment, medical equipment, accident prevention, anti-crime equipment, and/or safety
equipment), it is necessary to verify whether the specifications of our products fit to such
applications. Please ensure that you will ask and check with our inquiry desk as to whether
the specifications of our products fit to such applications use before you use our products.
■ The quality and performance of our products as described in this online catalog only apply
to our products when used in isolation. Therefore, please ensure you evaluate and verify
our products under the specific circumstances in which our products are assembled in your
own products and in which our products will actually be used.
■ If you use our products in equipment that requires a high degree of reliability, regardless
of the application, it is recommended that you set up protection circuits and redundancy
circuits in order to ensure safety of your equipment.
■ The products and product specifications described in this online catalog are subject to
change for improvement without prior notice. Therefore, please be sure to request and
confirm the latest product specifications which explain the specifications of our products in
detail, before you finalize the design of your applications, purchase, or use our products.
■ The technical information in this online catalog provides examples of our products'
typical operations and application circuits. We do not guarantee the non-infringement of
third party's intellectual property rights and we do not grant any license, right, or interest
in our intellectual property.
■ If any of our products, product specifications and/or technical information in this online
catalog is to be exported or provided to non-residents, the laws and regulations of the
exporting country, especially with regard to security and export control, shall be observed.
■ The switchover date for compliance with the RoHS Directive/REACH Regulations varies
depending on the part number or series of our products.
■ When you use the inventory of our products for which it is unclear whether those products
are compliant with the RoHS Directive/REACH Regulation, please select "Sales Inquiry" in the
website inquiry form and contact us.
We do not take any responsibility for the use of our products outside the scope of the
Guidelines and precautions regarding the
described in this online catalog.
<Regarding the Certificate of Compliance with
01-Apr-19
technical information and use of our products
the EU RoHS Directive/REACH Regulations>