ADG433ABRZ-REEL7 - ANALOG DEVICES

TLP3041(S),TLP3042(S),TLP3043(S)

2010-10-01

TOSHIBA PHOTOCOUPLER GaAs IRED & PHOTO-TRIAC

TLP3041(S),TLP3042(S),TLP3043(S)

OFFICE MACHINE

HOUSEHOLD USE EQUIPMENT

TRIAC DRIVER

SOLID STATE RELAY

The TOSHIBA TLP3041 (S), TLP3042 (S), TLP3043 (S) consist of a zero

voltage crossing turn-on photo-triac optically coupled to a gallium

arsenide infrared emitting diode in a six lead plastic DIP package.

z Peak Off-State Voltage : 400 V (min)

z Trigger LED Current : 15 mA (max) (TLP3041(S))

10 mA (max) (TLP3042(S))

5 mA (max) (TLP3043(S))

z On-State Current : 100 mA (max)

z Isolation Voltage : 5000 Vrms (min)

z UL Recognized : UL1577, File No. E67349

z SEMKO Approved : SS EN60065

SS EN60950, File No.9841109

z BSI Approved : BS EN60065, File No.8385

BS EN60950, File No.8386

z Option (D4) type

VDE approved: DIN EN60747-5-2

Approved No. 40009302

Maximum operating insulation voltage: 890VPK

Highest permissible over voltage: 8000VPK

(Note):When a EN60747-5-2 approved type is needed,

please designate the "Option (D4)"

z Construction mechanical rating

7.62 mm pich

Standard Type

10.16 mm pich

TLPxxxxF Type

Creepage Distance

Clearance

Insulation Thickness

7.0 mm (Min)

0.5 mm (Min)

8.0 mm (Min)

0.5 mm (Min)

JEDEC ―

JEITA ―

TOSHIBA 11-7A9

weight: 0.39g (typ.)

Unit: mm

1: Anode

2: Cathode

3: N.C.

4:Terminal 1

6:Terminal 2

ZC:Zero-cross Circuit

Pin Configuration

(top view)

TLP3041(S),TLP3042(S),TLP3043(S)

2010-10-01

Absolute Maximum Ratings (Ta = 25°C)

CHARACTERISTIC SYMBOL RATING UNIT

Forward Current IF 50 mA

Forward Current Derating

(Ta ≥ 53°C) ΔIF / °C −0.7 mA / °C

Peak Forward Current

(100

s pulse, 100pps) IFP 1 A

Power Dissipation PD 100 mW

Power Dissipation Derating

(Ta ≥ 25°C) ΔPD / °C −1.0 mW / °C

Reverse Voltage VR 5 V

LED

Junction Temperature Tj 125 °C

Off-State Output Terminal Voltage VDRM 400 V

On-Stage RMS Ta = 25°C 100

Current Ta = 70°C

IT(RMS)

On-State Current Derating

(Ta ≥ 25°C) ΔIT / °C −1.1 mA / °C

Peak On-Stage Current

(100

s pulse, 120pps) ITP 2 A

Peak Nonrepetitive Surge

Current (PW = 10ms) ITSM 1.2 A

Power Dissipation PD 300 mW

Power Dissipation Derating

(Ta ≥ 25°C) ΔPD / °C −4.0 mW / °C

DETECTOR

Junction Temperature Tj 115 °C

Storage Temperature Range Tstg −55 to 150 °C

Operating Temperature Range Topr −40 to 100 °C

Lead Soldering Temperature (10s) Tsol 260 °C

Total Package Power Dissipation PT 330 mW

Total Package Power Dissipation

Derating (Ta ≥ 25°C) ΔPT / °C −4.4 mW / °C

Isolation Voltage

(AC, 1 min., R.H. ≤ 60%) (Note 1) BVS 5000 Vrms

Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the

significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even

if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum

ratings.

Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook

(“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test

report and estimated failure rate, etc).

Note 1: Device considered a two terminal device: Pins 1, 2 and 3 shorted together and pins 4 and 6 shorted

together.

Recommended Operating Conditions

CHARACTERISTIC SYMBOL MIN TYP. MAX UNIT

Supply Voltage VAC ⎯ ⎯ 120 Vac

Forward Current IF* 15 20 25 mA

Peak On-Stage Current ITP ⎯ ⎯ 1 A

Operating Temperature Topr −25 ⎯ 85 °C

Note: Recommended operating conditions are given as a design guideline to obtain expected performance of the

device. Additionally, each item is an independent guideline respectively. In developing designs using this

product, please confirm specified characteristics shown in this document.

* : In the case of TLP3042

TLP3041(S),TLP3042(S),TLP3043(S)

2010-10-01

Individual Electrical Characteristics (Ta = 25°C)

CHARACTERISTIC SYMBOL TEST CONDITION MIN TYP. MAX UNIT

Forward Voltage VF I

F = 10mA 1.0 1.15 1.3 V

Reverse Current IR V

R = 5V ⎯ ⎯ 10

LED

Capacitance CT V = 0, f = 1MHz ⎯ 10 ⎯ pF

Peak Off-State Current IDRM V

DRM = 400V ⎯ 10 100 nA

Peak On-Stage Voltage VTM I

TM = 100mA ⎯ 1.7 3.0 V

Holding Current IH ⎯ ⎯ 0.6 ⎯ mA

Critical Rate of Rise of Off-

State Voltage dv / dt Vin = 120Vrms, Ta = 85°C (Fig.1) 200 500 ⎯ V /

DETECTOR

Critical Rate of Rise of

Commutating Voltage dv / dt(c) Vin = 30Vrms, IT = 15mA (Fig.1) ⎯ 0.2 ⎯ V /

Coupled Electrical Characteristics (Ta = 25°C)

CHARACTERISTIC SYMBOL TEST CONDITION MIN TYP. MAX UNIT

TLP3041(S) ⎯ ⎯ 15

TLP3042(S) ⎯ 5 10

Trigger LED Current

TLP3043(S)

IFT V

T = 3V

⎯ ⎯ 5

Inhibit Voltage VIH I

F = Rated IFT ⎯ ⎯ 40 V

Leakage in Inhibited State IIH IF = Rated IFT

VT = Rated VDRM ⎯ 100 300

Capacitance Input to Output CS V

S = 0, f = 1MHz ⎯ 0.8 ⎯ pF

Isolation Resistance RS V

S = 500V (R.H. ≤ 60%) 5×1010 1014 ⎯ Ω

AC, 1 minute 5000 ⎯ ⎯

AC, 1 second (in oil) ⎯ 10000 ⎯

Vrms

Isolation Voltage BVS

DC, 1 minute (in oil) ⎯ 10000 ⎯ Vdc

Fig. 1 dv / dt test circuit

＋5V,VCC

dv / dt（c）

Vin

dv / dt

～

Rin

2kΩ

VCC 120Ω

−

TLP3041(S),TLP3042(S),TLP3043(S)

2010-10-01

TLP3041(S),TLP3042(S),TLP3043(S)

2010-10-01

TLP3041(S),TLP3042(S),TLP3043(S)

2010-10-01

RESTRICTIONS ON PRODUCT USE

• Toshiba Corporation, and its subsidiaries and affiliates (collectively “TOSHIBA”), reserve the right to make changes to the information

in this document, and related hardware, software and systems (collectively “Product”) without notice.

• This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with

TOSHIBA’s written permission, reproduction is permissible only if reproduction is without alteration/omission.

• Though TOSHIBA works continually to improve Product’s quality and reliability, Product can malfunction or fail. Customers are

responsible for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and

systems which minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily

injury or damage to property, including data loss or corruption. Before customers use the Product, create designs including the

Product, or incorporate the Product into their own applications, customers must also refer to and comply with (a) the latest versions of

all relevant TOSHIBA information, including without limitation, this document, the specifications, the data sheets and application notes

for Product and the precautions and conditions set forth in the “TOSHIBA Semiconductor Reliability Handbook” and (b) the

instructions for the application with which the Product will be used with or for. Customers are solely responsible for all aspects of their

own product design or applications, including but not limited to (a) determining the appropriateness of the use of this Product in such

design or applications; (b) evaluating and determining the applicability of any information contained in this document, or in charts,

diagrams, programs, algorithms, sample application circuits, or any other referenced documents; and (c) validating all operating

parameters for such designs and applications. TOSHIBA ASSUMES NO LIABILITY FOR CUSTOMERS’ PRODUCT DESIGN OR

APPLICATIONS.

• Product is intended for use in general electronics applications (e.g., computers, personal equipment, office equipment, measuring

equipment, industrial robots and home electronics appliances) or for specific applications as expressly stated in this document.

Product is neither intended nor warranted for use in equipment or systems that require extraordinarily high levels of quality and/or

reliability and/or a malfunction or failure of which may cause loss of human life, bodily injury, serious property damage or serious

public impact (“Unintended Use”). Unintended Use includes, without limitation, equipment used in nuclear facilities, equipment used

in the aerospace industry, medical equipment, equipment used for automobiles, trains, ships and other transportation, traffic signaling

equipment, equipment used to control combustions or explosions, safety devices, elevators and escalators, devices related to electric

power, and equipment used in finance-related fields. Do not use Product for Unintended Use unless specifically permitted in this

document.

• Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part.

• Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any

applicable laws or regulations.

• The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any

infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to

any intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise.

• ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE

FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY

WHATSOEVER, INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR

LOSS, INCLUDING WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND

LOSS OF DATA, AND (2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO

SALE, USE OF PRODUCT, OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS

FOR A PARTICULAR PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT.

• GaAs (Gallium Arsenide) is used in Product. GaAs is harmful to humans if consumed or absorbed, whether in the form of dust or

vapor. Handle with care and do not break, cut, crush, grind, dissolve chemically or otherwise expose GaAs in Product.

• Do not use or otherwise make available Product or related software or technology for any military purposes, including without

limitation, for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile

technology products (mass destruction weapons). Product and related software and technology may be controlled under the

Japanese Foreign Exchange and Foreign Trade Law and the U.S. Export Administration Regulations. Export and re-export of Product

or related software or technology are strictly prohibited except in compliance with all applicable export laws and regulations.

• Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product.

Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances,

including without limitation, the EU RoHS Directive. TOSHIBA assumes no liability for damages or losses occurring as a result of

noncompliance with applicable laws and regulations.