PS2705A-1-F3-A - NEC Electronics

PIN CONNECTION

(Top View)

1. Anode, Cathode

2. Cathode, Anode

3. Emitter

4. Collector

DESCRIPTION

The PS2705A-1 is an optically coupled isolator containing a GaAs light emitting diode and an NPN silicon

phototransistor to realize an excellent cost performance.

This package is SOP (Small Outline Package) type and has shield effect to cut off ambient light.

It is designed for high density mounting applications.

FEATURES

• Lead-free product: Solder plating specification Sn-Bi

• AC input response

• High isolation voltage (BV = 3 750 Vr.m.s.)

• SOP (Small Outline Package) type

• Ordering number of taping product: PS2705A-1-F3, F4

• Safety standards

• UL approved: File No. E72422

• DIN EN60747-5-2 (VDE0884 Part2) approved (Option)

APPLICATIONS

• Hybrid IC

• Telephone/FAX.

• FA/OA equipment

• Programmable logic controllers

• Power supply

DATA SHEET

The information in this document is subject to change without notice. Before using this document, please confirm that

this is the latest version.

Not all devices/types available in every country. Please check with local NEC Compound Semiconductor Devices

representative for availability and additional information.

PHOTOCOUPLER

PS2705A-1

HIGH ISOLATION VOLTAGE

SOP PHOTOCOUPLER −NEPOC Series−

Document No. PN10397EJ01V0DS (1st edition)

Date Published May 2004 CP(K)

Printed in Japan 

NEC Compound Semiconductor Devices 2003, 2004

PACKAGE DIMENSIONS (in millimeters)

PS2705A-1

4.5±0.5

7.0±0.3

4.4

0.5±0.3

0.15+0.10

–0.05

2.0

0.1±0.1

2.1±0.2

2.54

0.4+0.10

–0.05 0.25 M

MARKING EXAMPLE

3 01

CTR Rank Code

Year Assembled

(Last 1 Digit)

Week Assembled

705A

N301

No. 1 pin

Mark Assembly Lot

*1 Bar : Lead Free

Remark "PS2" and "-1" are omitted from original type number

Data Sheet PN10397EJ01V0DS

PS2705A-1

ORDERING INFORMATION

Part Number Package Packing Style Safety Standards

Approval Solder Plating

Specification Application Part

Number*1

PS2705A-1 4-pin SOP Magazine case 100 pcs Standard products Sn-Pb PS2705A-1

PS2705A-1-F3 Embossed Tape 3 500 pcs/reel (UL approved)

PS2705A-1-F4

PS2705A-1-V Magazine case 100 pcs DIN EN60747-5-2

PS2705A-1-V-F3 Embossed Tape 3 500 pcs/reel (VDE0884 Part2)

PS2705A-1-V-F4 Approved (Option)

PS2705A-1-A Magazine case 100 pcs Standard products Sn-Bi

PS2705A-1-F3-A Embossed Tape 3 500 pcs/reel (UL approved)

PS2705A-1-F4-A

PS2705A-1-V-A Magazine case 100 pcs DIN EN60747-5-2

PS2705A-1-V-F3-A Embossed Tape 3 500 pcs/reel (VDE0884 Part2)

PS2705A-1-V-F4-A Approved (Option)

*1 For the application of the Safety Standard, following part number should be used.

Data Sheet PN10397EJ01V0DS 3

PS2705A-1

ABSOLUTE MAXIMUM RATINGS (TA = 25°C, unless otherwise specified)

Parameter Symbol Ratings Unit

Diode Forward Current (DC) IF ±30 mA

Power Dissipation Derating

∆

PD/°C 0.8 mW/°C

Power Dissipation PD 80 mW

Peak Forward Current*1 IFP ±0.5 A

Transistor Collector to Emitter Voltage VCEO 70 V

Emitter to Collector Voltage VECO 5 V

Collector Current IC 30 mA

Power Dissipation Derating

∆

PC/°C 1.5 mW/°C

Power Dissipation PC 150 mW

Isolation Voltage*2 BV 3 750 Vr.m.s.

Operating Ambient Temperature TA –55 to +100 °C

Storage Temperature Tstg –55 to +150 °C

*1 PW = 100

s, Duty Cycle = 1%

*2 AC voltage for 1 minute at TA = 25°C, RH = 60% between input and output

Data Sheet PN10397EJ01V0DS

PS2705A-1

ELECTRICAL CHARACTERISTICS (TA = 25°C)

Parameter Symbol Conditions MIN. TYP. MAX. Unit

Diode Forward Voltage VF IF = ±5 mA 1.2 1.4 V

Terminal Capacitance Ct V = 0 V, f = 1.0 MHz 20 pF

Transistor Collector to Emitter Dark

Current ICEO IF = 0 mA, VCE = 70 V 100 nA

Coupled Current Transfer Ratio

(IC/IF)*1 CTR IF = ±5 mA, VCE = 5 V 50 300 %

Collector Saturation

Voltage VCE (sat) IF = ±10 mA, IC = 2 mA 0.13 0.3 V

Isolation Resistance RI-O VI-O = 1.0 kVDC 1011 Ω

Isolation Capacitance CI-O V = 0 V, f = 1.0 MHz 0.4 pF

Rise Time

*2 tr VCC = 5 V, IC = 2 mA, RL = 100 Ω 5

Fall Time

*2 tf 7

*1 CTR rank

N: 50 to 300 (%)

L: 100 to 300 (%)

M: 50 to 150 (%)

*2 Test circuit for switching time

PW = 100 s,

Duty cycle = 1/10

Pulse input VCC

VOUT

RL = 100 Ω50 Ω

Data Sheet PN10397EJ01V0DS 5

PS2705A-1

TYPICAL CHARACTERISTICS (TA = 25°C, unless otherwise specified)

100

025 50 75 100 125

0.8 mW/˚C 200

150

100

025 50 75 100 125

1.5 mW/˚C

100

1.51.41.31.21.11.00.90.80.7

0.5

0.1

0˚C

–25˚C

–55˚C

+60˚C

+25˚C

TA = +100˚C

100

1 000

10 000

0 25 50 75 100

= 70 V

= 24 V

0.1

0 0.2 0.4 0.6 0.8 1.0

1mA

2mA

5mA

= 10mA

0.05

468

1 mA

2 mA

5 mA

= 10 mA

Ambient Temperature T

(˚C)

Diode Power Dissipation P

(mW)

DIODE POWER DISSIPATION vs.

AMBIENT TEMPERATURE

Ambient Temperature T

(˚C)

Transistor Power Dissipation P

(mW)

TRANSISTOR POWER DISSIPATION vs.

AMBIENT TEMPERATURE

Forward Voltage V

(V)

Forward Current I

(mA)

FORWARD CURRENT vs.

FORWARD VOLTAGE

Collector to Emitter Voltage V

(V)

Collector Current I

(mA)

COLLECTOR CURRENT vs.

COLLECTOR TO EMITTER VOLTAGE

Ambient Temperature T

(˚C)

COLLECTOR TO EMITTER DARK

CURRENT vs. AMBIENT TEMPERATURE

Collector to Emitter Dark Current I

CEO

(nA)

Collector Saturation Voltage V

CE (sat)

(V)

Collector Current I

(mA)

COLLECTOR CURRENT vs.

COLLECTOR SATURATION VOLTAGE

Remark The graphs indicate nominal characteristics.

Data Sheet PN10397EJ01V0DS

PS2705A-1

0.2

0.4

0.6

0.8

1.0

1.2

–

25 0 25 50 75 100

CTR : 300%

CTR : 90%

100

150

200

250

300

0.01 0.1 1 10 100

= 5 V,

n = 3

0.1

100

10 100 1 000 10 000

= 2 mA, V

= 5 V,

CTR = 236%

TA = 25˚C

TA = 60˚C

= 5 mA (TYP.)

1.2

1.0

0.8

0.6

0.4

0.2

010

100

1 000

1 10 100

= 5 mA, V

= 5 V,

CTR = 236%

= 1 kΩ

300 Ω

100 Ω

IF = 5 mA,

VCE = 5 V

–

0.1 1 10 100 1 000

–50

Ambient Temperature T

(˚C)

NORMALIZED CURRENT TRANSFER

RATIO vs. AMBIENT TEMPERATURE

Normalized Current Transfer Ratio CTR

Normalized to 1.0

at T

= 25˚C,

= 5 mA, V

= 5 V

Forward Current I

(mA)

Current Transfer Ratio CTR (%)

CURRENT TRANSFER RATIO vs.

FORWARD CURRENT

Sample A

Load Resistance R

(Ω)

SWITCHING TIME vs.

LOAD RESISTANCE

Switching Time t ( s)

Load Resistance R

(kΩ)

SWITCHING TIME vs.

LOAD RESISTANCE

Switching Time t ( s)

Frequency f (kHz)

Normalized Gain G

FREQUENCY RESPONSE

Time (Hr)

LONG TERM CTR DEGRADATION

CTR (Relative Value)

Remark The graphs indicate nominal characteristics.

Data Sheet PN10397EJ01V0DS 7

PS2705A-1

TAPING SPECIFICATIONS (in millimeters)

Tape Direction

Outline and Dimensions (Reel)

Packing: 3 500 pcs/reel

2.0±0.5

R 1.0

13.0±0.2

21.0±0.8

330±2.0

100±1.0

2.0±0.5

11.9 to 15.4

Outer edge of

flange

17.5±1.0

13.5±1.0

13.0±0.2

PS2705A-1-F3 PS2705A-1-F4

1.55±0.1

2.0±0.05

4.0±0.1

1.75±0.1

4.6±0.1

2.9 MAX.

0.3

8.0±0.1

Outline and Dimensions (Tape)

2.4±0.1

1.5

+0.1

–0

7.4±0.1

5.5±0.05

12.0±0.2

Data Sheet PN10397EJ01V0DS

PS2705A-1

NOTES ON HANDLING

1. Recommended soldering conditions

(1) Infrared reflow soldering

• Peak reflow temperature 260°C or below (package surface temperature)

• Time of peak reflow temperature 10 seconds or less

• Time of temperature higher than 220°C 60 seconds or less

• Time to preheat temperature from 120 to 180°C 120±30 s

• Number of reflows Three

• Flux Rosin flux containing small amount of chlorine (The flux with a

maximum chlorine content of 0.2 Wt% is recommended.)

120±30 s

(preheating)

220˚C

180˚C

Package Surface Temperature T (˚C)

Time (s)

Recommended Temperature Profile of Infrared Reflow

(heating)

to 10 s

to 60 s

260˚C MAX.

120˚C

(2) Wave soldering

• Temperature 260°C or below (molten solder temperature)

• Time 10 seconds or less

• Preheating conditions 120°C or below (package surface temperature)

• Number of times One (Allowed to be dipped in solder including plastic mold portion.)

• Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine

content of 0.2 Wt% is recommended.)

(3) Soldering by Soldering Iron

• Peak Temperature (lead part temperature) 350°C or below

• Time (each pins) 3 seconds or less

• Flux Rosin flux containing small amount of chlorine (The flux with a

maximum chlorine content of 0.2 Wt% is recommended.)

(a) Soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead

(b) Please be sure that the temperature of the package would not be heated over 100°C

Data Sheet PN10397EJ01V0DS 9

PS2705A-1

(4) Cautions

• Fluxes

Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent.

2. Cautions regarding noise

Be aware that when voltage is applied suddenly between the photocoupler’s input and output or between

collector-emitters at startup, the output side may enter the on state, even if the voltage is within the absolute

maximum ratings.

USAGE CAUTIONS

1. Protect against static electricity when handling.

2. Avoid storage at a high temperature and high humidity.

Data Sheet PN10397EJ01V0DS

PS2705A-1

M8E 00. 4 - 0110

The information in this document is current as of May, 2004. The information is subject to change

without notice. For actual design-in, refer to the latest publications of NEC's data sheets or data

books, etc., for the most up-to-date specifications of NEC semiconductor products. Not all products

and/or types are available in every country. Please check with an NEC sales representative for

availability and additional information.

No part of this document may be copied or reproduced in any form or by any means without prior

written consent of NEC. NEC assumes no responsibility for any errors that may appear in this document.

NEC does not assume any liability for infringement of patents, copyrights or other intellectual property rights of

third parties by or arising from the use of NEC semiconductor products listed in this document or any other

liability arising from the use of such products. No license, express, implied or otherwise, is granted under any

patents, copyrights or other intellectual property rights of NEC or others.

Descriptions of circuits, software and other related information in this document are provided for illustrative

purposes in semiconductor product operation and application examples. The incorporation of these

circuits, software and information in the design of customer's equipment shall be done under the full

responsibility of customer. NEC assumes no responsibility for any losses incurred by customers or third

parties arising from the use of these circuits, software and information.

While NEC endeavours to enhance the quality, reliability and safety of NEC semiconductor products, customers

agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To minimize

risks of damage to property or injury (including death) to persons arising from defects in NEC

semiconductor products, customers must incorporate sufficient safety measures in their design, such as

redundancy, fire-containment, and anti-failure features.

NEC semiconductor products are classified into the following three quality grades:

"Standard", "Special" and "Specific". The "Specific" quality grade applies only to semiconductor products

developed based on a customer-designated "quality assurance program" for a specific application. The

recommended applications of a semiconductor product depend on its quality grade, as indicated below.

Customers must check the quality grade of each semiconductor product before using it in a particular

application.

"Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio

and visual equipment, home electronic appliances, machine tools, personal electronic equipment

and industrial robots

"Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster

systems, anti-crime systems, safety equipment and medical equipment (not specifically designed

for life support)

"Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life

support systems and medical equipment for life support, etc.

The quality grade of NEC semiconductor products is "Standard" unless otherwise expressly specified in NEC's

data sheets or data books, etc. If customers wish to use NEC semiconductor products in applications not

intended by NEC, they must contact an NEC sales representative in advance to determine NEC's willingness

to support a given application.

(Note)

(1) "NEC" as used in this statement means NEC Corporation, NEC Compound Semiconductor Devices, Ltd.

and also includes its majority-owned subsidiaries.

(2) "NEC semiconductor products" means any semiconductor product developed or manufactured by or for

NEC (as defined above).

•

Data Sheet PN10397EJ01V0DS 11

PS2705A-1

Caution GaAs Products This product uses gallium arsenide (GaAs).

GaAs vapor and powder are hazardous to human health if inhaled or ingested, so please observe

the following points.

• Follow related laws and ordinances when disposing of the product. If there are no applicable laws

and/or ordinances, dispose of the product as recommended below.

1. Commission a disposal company able to (with a license to) collect, transport and dispose of

materials that contain arsenic and other such industrial waste materials.

2. Exclude the product from general industrial waste and household garbage, and ensure that the

product is controlled (as industrial waste subject to special control) up until final disposal.

• Do not burn, destroy, cut, crush, or chemically dissolve the product.

• Do not lick the product or in any way allow it to enter the mouth.

NEC Compound Semiconductor Devices Hong Kong Limited

E-mail: ncsd-hk@elhk.nec.com.hk (sales, technical and general)

Hong Kong Head Office

Taipei Branch Office

Korea Branch Office

TEL: +852-3107-7303

TEL: +886-2-8712-0478

TEL: +82-2-558-2120

FAX: +852-3107-7309

FAX: +886-2-2545-3859

FAX: +82-2-558-5209

NEC Electronics (Europe) GmbH http://www.ee.nec.de/

TEL: +49-211-6503-0 FAX: +49-211-6503-1327

California Eastern Laboratories, Inc. http://www.cel.com/

TEL: +1-408-988-3500 FAX: +1-408-988-0279

0401

NEC Compound Semiconductor Devices, Ltd. http://www.ncsd.necel.com/

E-mail: salesinfo@ml.ncsd.necel.com (sales and general)

techinfo@ml.ncsd.necel.com (technical)

5th Sales Group, Sales Division TEL: +81-44-435-1588 FAX: +81-44-435-1579

For further information, please contact

PS2705A-1