Description
Features
n1500 WATT PEAK POWER PROTECTION
nEXCELLENT CLAMPING CAPABILITY
nFAST RESPONSE TIME
Mechanical Dimensions
nTYPICAL IR < 1µA ABOVE 10V
n
GLASS PASSIVATED CHIP CONSTRUCTION
nMEETS UL SPECIFICATION 94V-0
Maximum Ratings
Peak Power Dissipation...PPK
TP = 1ms (Note 5)
Steady State Power Dissipation...PD
@ TL = 75°C
Non-Repetitive Peak Forward Surge Current...IFSM
@ Rated Load Conditions, 8.3 ms, ½ Sine Wave, Single Phase
(Note 3)
Weight...GRM
Soldering Requirements (Time & Temp)...ST
@ 250°C
Operating & Storage Temperature Range...TJ, TSTRG
1.5KE Series
Data Sheet
6.8V to 400V GPP TRANSIENT
VOLTAGE SUPPRESSORS
1.5KE Series
Units
Watts
Watts
Amps
Grams
......................................... 1500 Min. ..........................................
............................................. 5.00 ...............................................
............................................. 200 ...............................................
............................................. 0.20 ...............................................
............................................. 11 Sec. ...........................................
......................................... -65 to 175 .......................................... °C
Page 11-14
Min. to
Solder
NOTES: 1. For Bi-Directional Applications, Use C or CA. Electrical Characteristics Apply in Both Directions.
2. Mounted on 40mm2 Copper Pads.
3. 8.3 ms, ½ Sine Wave, Single Phase Duty Cycle, @ 4 Pulses Per Minute Maximum.
4. VBR Measured After IT Applies for 300 µs. IT = Square Wave Pulse or Equivalent.
5. Non-Repetitive Current Pulse. Per Fig. 3 and Derated Above TA = 25°C Per Fig. 2.
(For Bi-Polar Applications, See Note 1)
.285
.375
1.00 Min.
.050 typ.
.190
.210
JEDEC
D0-201AD
Uni-Polar
Load
TVS
Device
TVS
Device
Load
Bi-Polar