1W005M THRU 1W10M Single Phase 1.0 AMP. Silicon Bridge Rectifiers Voltage Range 50 to 1000 Volts Current 1.0 Ampere WOB Features aUL Recognized File # E-96005 aSurge overload ratings to 30 amperes peak aIdeal for printed circuit board aReliable low cost construction technique results in inexpensive product aHigh temperature soldering guaranteed: 250 / 10 seconds / 0.375" ( 9.5mm ) lead length at 5 lbs. ( 2.3 Kg ) tension Mechanical Data a Case: Molded plastic a Lead: Solder plated a Polarity: As marked aWeight: 1.10 grams Dimensions in inches and (millimeters) Maximum Ratings and Electrical Characteristics Rating at 25ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% 1W005M 1W01M 1W02M 1W04M Type Number Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage 50 35 50 100 70 100 Maximum Average Forward Rectified Current @TA = 50 Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method ) Maximum Instantaneous Forward Voltage @ 1.0A Maximum DC Reverse Current @ TA=25 at Rated DC Blocking Voltage @ TA=100 Typical Thermal resistance (Note) RJA RJL Operating Temperature Range TJ Storage Temperature Range TSTG 200 140 200 400 280 400 1W06M 1W08M 1W10M 600 420 600 800 560 800 1000 700 1000 1.0 A 30 A 1.0 V 10 500 36 13 -55 to +125 -55 to +150 uA uA /W Note: Thermal Resistance from Junction to Ambient and from Junction to Lead Mounted on P.C.B. with 0.47 x 0.47" (12 x 12mm) Copper Pads. - 436 - Units V V V RATINGS AND CHARACTERISTIC CURVES (1W005M THRU 1W10M) FIG.1- MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT PER BRIDGE ELEMENT AVERAGE FORWARD CURRENT. (A) PEAK FORWARD SURGE CURRENT. (A) 50 40 30 20 10 0 FIG.2- MAXIMUM FORWARD CURRENT DERATING CURVE 1.6 1.4 1.2 1.0 .8 .6 .4 .2 0 1 2 10 20 40 60 40 20 100 80 60 100 120 o AMBIENT TEMPERATURE. ( C) NUMBER OF CYCLES AT 60Hz FIG.4- TYPICAL REVERSE CHARACTERISTICS PER BRIDGE ELEMENT FIG.3- TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS PER BRIDGE ELEMENT 10 20 INSTANTANEOUS REVERSE CURRENT. ( A) INSTANTANEOUS FORWARD CURRENT. (A) 10 Tj=25oC Pulse Width=300 s 1% Duty Cycle 1.0 0.1 Tj=100 0C 1.0 .10 Tj=25 0C 0.01 0 2 4 6 8 10 12 .01 14 0 20 40 60 80 100 120 PERCENT OF RATED PEAK REVERSE VOLTAGE. (%) FORWARD VOLTAGE. (V) - 437 - 140 140