Kvaser OBD II to Dsub9 Adapter Cable Kvaser OBD II to Dsub9 Adapter Cable Kvaser OBD II Adapter Cable connects any Kvaser CAN bus interface with a 9 Pin DSUB connector A Kvaser OBD II Adapter Cable connects any Kvaser CAN bus interface with a 9 Pin DSUB connector to a vehicle with an OBD II (J1962) connector. General features Molded OBD II (SAE J1962) male connector, for Type A (12 Volt) as well as Type B (24 Volt). Molded 9 pin DSUB female connector with thumbscrews 2500 mm (approx. 8 ft) long cable made of durable thermoplastic rubber Designed for Kvaser's High-Speed, Low-Speed and Single-Wire CAN interfaces Perfect for Kvaser Memorator, Kvaser Leaf Professional, etc. More information see www.kvaser.com (c) 2014 KVASER AB Technical Data Kvaser OBD II to Dsub9 Adapter Cable Weight Length Material 160g 2500mm durable thermoplastic rubber The information herein is subject to change without notice KVASER Aminogatan 25 SE-431 53 Molndal, Sweden Telephone: +46 (0)31 88 63 44 E-mail: sales@kvaser.com www.kvaser.com (c) 2014 KVASER AB Powered by TCPDF (www.tcpdf.org)