Kvaser OBD II to Dsub9 Adapter Cable
Kvaser OBD II to Dsub9 Adapter Cable
More information see
www.kvaser.com
© 2014 KVASER AB
Kvaser OBD II Adapter Cable connects any Kvaser CAN bus interface with
a 9 Pin DSUB connector
A Kvaser OBD II Adapter Cable connects any Kvaser CAN bus interface with a 9
Pin DSUB connector to a vehicle with an OBD II (J1962) connector.
General features
Molded OBD II (SAE J1962) male connector, for Type A (12 Volt) as well
as Type B (24 Volt).
Molded 9 pin DSUB female connector with thumbscrews
2500 mm (approx. 8 ft) long cable made of durable thermoplastic rubber
Designed for Kvaser's High-Speed, Low-Speed and Single-Wire CAN
interfaces
Perfect for Kvaser Memorator, Kvaser Leaf Professional, etc.
Technical Data
Kvaser OBD II to Dsub9 Adapter Cable
Weight 160g
Length 2500mm
Material durable thermoplastic rubber
The information herein is subject to change without notice
KVASER
Aminogatan 25
SE-431 53 Mölndal, Sweden
Telephone: +46 (0)31 88 63 44
E-mail: sales@kvaser.com
www.kvaser.com
© 2014 KVASER AB
Powered by TCPDF (www.tcpdf.org)
