3-8-11 Shin-Yokohama,Kouhoku-ku,Yokohama-city, Kanagawa, 222-0033 Japan TEL. +81-45-470-7251 FAX. +81-45-470-7261 SHIGA FACTORY 30 Ta-cho, Nagahama-city, Shiga, 529-0142 Japan TEL. +81-749-73-3021 FAX. +81-749-73-2175 SHIRAKAWA OFFICE 9-32 Aza-sugiyama, Oaza-yone, Nishigo-mura, Nishishirakawa-gun, Fukushima, 961-8031 Japan TEL. +81-248-48-1654 FAX. +81-248-25-5614 SALES OFFICE 2013 / 2014E HIGH QUALITY CAPACITORS HEAD OFFICE AFFILIATED COMPANY ELNA AMERICA.,INC. 3600 Dallas Hwy.,Ste.230 #389 Marietta, GA 30064, U.S.A. TEL. +1-678-261-8284 FAX. +1-678-815-0892 ELNA ELECTRONICS SINGAPORE PTE.LTD. 103 Kallang Avenue, #04-01 AIS Industrial Building Singapore 339504 TEL. + 6 5 - 6 2 9 3 0 1 8 1 FAX. + 6 5 - 6 2 9 6 6 7 1 6 ELNA (SHANGHAI) CO.,LTD. Room 6203, Rui Jin Hotel Business Center 118 Rui Jin 2 Road, Shanghai, China Post Code 200020 TEL. +86-21-64452269 FAX. +86-21-64452271 ELNA BANGKOK SALES OFFICE 88.90. Chalermphrakiat Rama 9 Road, Nongborn, TEL. + 6 6 - 2 - 3 9 8 5 3 3 3 Pravct, Bangkok 10250, Thailand FAX. + 6 6 - 2 - 3 9 8 5 3 3 7 ELNA MALAYSIA PENANG SALES OFFICE 2473, Tingkat Perusahaan 6, Free Trade Zone, Prai Industrial Estate, 13600 Prai, Penang, Malaysia TANIN ELNA CO.,LTD. HEAD OFFICE 88.90. Chalermphrakiat Rama 9 Road, Nongborn, Pravet, Bangkok 10250, Thailand CHIANGMAI FACTORY 56 Mahidoal Road T.Sutep A.Muang Chiangmai 50200, Thailand. TEL. + 6 6 - 2 - 3 9 8 5 3 3 3 FAX. + 6 6 - 2 - 3 9 8 5 3 3 7 TEL. + 6 6 - 5 3 - 2 7 0 2 0 6 FAX. + 6 6 - 5 3 - 2 7 5 0 6 4 ELNA-SONIC SDN.BHD. 2473, Tingkat Perusahaan 6, TEL. + 6 0 - 4 - 3 9 9 2 9 1 6 Free Trade Zone, Prai Industrial Estate, FAX. + 6 0 - 4 - 3 9 9 2 9 2 5 Sales office TEL. + 6 0 - 4 - 3 9 8 5 3 6 9 13600 Prai, Penang, Malaysia. ELNA TOHOKU CO.,LTD. AOMORI FACTORY 1-349-1 Okonoki, Kuroishi-city Aomori, 036-0357 Japan TEL. +81-172-52-4166 FAX. +81-172-53-4609 TEL. + 6 0 - 4 - 3 9 8 5 3 6 9 EASTERN JAPAN OFFICE 3-8-11 Shin-Yokohama,Kouhoku-ku,Yokohama-city TEL. +81-45-470-7254 Kanagawa, 222-0033 Japan FAX. +81-45-470-7260 WESTERN JAPAN OFFICE 6-1-15 Nishinakajima Yodogawa-ku, Osaka-city, Osaka, 532-0011 Japan CAUTION Observe the following to ensure safe operation. NOTE TEL. +81-6-6304-6831 FAX. +81-6-6304-8638 High Quality CAPACITORS CO.,LTD. 1. Since the contents contained are subject to changes in specifications, dimensions and so forth without notice due to modification, please confirm the contents when placing an order. If any of the matters described here are unclear, please inquire at one of our nearby sales offices. 2. The contents of this catalog are valid as of December 2012. CAT.No.2013/2014E Electronic Components 1. The models and specification values contained in this catalog are for reference purposes only. During actual use or when placing an order, please request "drawings"and make your purchase or use the purchased product based on those drawings. 2. In order to ensure that products are used correctly and safely, always make sure to read the cautions for using prior to using the product. ALUMINUM ELECTROLYTIC CAPACITORS WITH CONDUCTIVE POLYMER SOLID ELECTROLYTE ALUMINUM ELECTROLYTIC CAPACITORS ELECTRIC DOUBLE LAYER CAPACITORS DYNACAP(R)" PLASTIC FILM CAPACITORS CO.,LTD. CAT.No.2013/2014E 1<' 3/$67,&),/0&$3$&,7256 Certifications of Quality Management System (as of Sep. 2012) Standard Ratings Factory ELNA CO., LTD. SHIRAKAWA Tech. (Japan) ELNA TOHOKU CO., LTD. AOMORI Factory (Japan) TANIN ELNA CO., LTD. (Thailand) ELNA-SONIC SDN. BHD. (Malaysia) Applicable Standard ISO 9001 ISO/TS 16949 Certification Number JP05/060268 IATF0089622 44 111 060686 Item Aluminum electrolytic capacitors Electric double layer capacitors Aluminum electrolytic capacitors Electric double layer capacitors Aluminum electrolytic capacitors Electric double layer capacitors Applicable Organization Rated voltage Rated capacitance V (F) SGS TUV ISO 9001 04100 1999 0506 ISO/TS 16949 IATF0110000 SGS MY04/0675 Aluminum electrolytic capacitors SGS ISO 9001 SG02/20012 Aluminum electrolytic capacitors SGS 880 TUV 1100 Certifications of Environmental Management System (as of Sep. 2012) Factory ELNA TOHOKU CO., LTD. AOMORI Factory (Japan) TANIN ELNA CO., LTD. (Thailand) ELNA-SONIC SDN. BHD. (Malaysia) Applicable Standard ISO 14001 Certification Number JQA-EM2918 Applicable Organization Japan Quality Assurance (JQA) Case (mm) D L Casing symbol Maximum current Thermal resistance Maximum peak current Series resistance Self-inductance Arms (K/W) A (m) (nH) ELNA Parts No. 220 85 70 F70 50 5.6 2640 1.9 60 NYD-880V221KF706BB 260 75 95 E95 45 5.6 2600 2.8 80 NYD-880V261KE956BB 350 85 95 F95 50 5.1 3500 2.4 60 NYD-880V351KF956BB 440 116 70 H70 65 5.8 5280 1.5 60 NYD-880V441KH706BB 480 85 120 FC0 55 4.7 3840 2.8 60 NYD-880V481KFC06BB 550 85 136 FD6 50 4.6 3850 3.0 60 NYD-880V551KFD66BB 700 116 95 H95 70 5.4 7000 1.7 60 NYD-880V701KH956BB 750 85 173 FH3 55 4.3 6750 3.7 60 NYD-880V751KFH36BB 970 116 120 HC0 75 5.0 5820 1.9 60 NYD-880V971KHC06BB 1100 116 132 HD2 75 4.9 6600 2.0 60 NYD-880V112KHD26BB 1500 116 173 HH3 80 3.4 13500 2.4 60 NYD-880V152KHH36BB 100 75 70 E70 35 6.0 1200 2.5 80 NYD-1100V101KE706BB 140 85 70 F70 45 5.6 1680 2.1 60 NYD-1100V141KF706BB 170 75 95 E95 40 5.6 1700 3.2 80 NYD-1100V171KE956BB 230 75 120 EC0 40 4.7 1840 4.1 80 NYD-1100V231KEC06BB 260 75 136 ED6 40 4.6 2080 4.4 80 NYD-1100V261KED66BB 280 116 70 H70 60 5.8 2800 1.6 60 NYD-1100V281KH706BB 350 75 173 EH3 40 4.2 3500 5.6 80 NYD-1100V351KEH36BB 420 85 136 FD6 55 4.6 3200 2.2 60 NYD-1100V421KFD66BB 450 116 95 H95 65 5.4 4500 1.9 60 NYD-1100V451KH956BB 480 85 173 FH3 50 4.3 4800 4.3 60 NYD-1100V481KFH36BB 610 116 120 HC0 70 5.0 5490 2.2 60 NYD-1100V611KHC06BB 700 116 132 HD2 70 4.9 6300 2.3 60 NYD-1100V701KHD26BB 940 116 173 HH3 70 3.4 9400 1.6 60 NYD-1100V941KHH36BB 1100 116 230 HN0 80 2.7 11000 1.5 100 NYD-1100V112KHN06BB 70 75 70 E70 35 6.0 1050 2.8 80 NYD-1320V700KE706BB ISO 14001 04104 1999 0506E5 TUV 110 75 95 E95 35 5.6 1540 3.8 80 NYD-1320V111KE956BB 160 75 120 EC0 40 4.7 1600 4.6 80 NYD-1320V161KEC06BB 180 75 136 ED6 40 4.6 1800 5.1 80 NYD-1320V181KED66BB ISO 14001 SG03/60718 SGS 220 85 120 FC0 45 4.7 2200 3.6 60 NYD-1320V221KFC06BB 260 85 136 FD6 45 4.6 2600 3.9 60 NYD-1320V261KFD66BB 310 116 95 H95 65 5.4 3720 2.0 60 NYD-1320V311KH956BB 340 85 173 FH3 50 4.3 4080 4.9 60 NYD-1320V341KFH36BB NYD-1320V421KHC06BB 1320 420 116 120 HC0 65 5.0 4200 2.4 60 480 116 132 HD2 70 4.9 4800 2.6 60 NYD-1320V481KHD26BB 660 116 173 HH3 70 3.4 7920 3.1 60 NYD-1320V661KHH36BB Please read the following warning and cautions !! The Electronic components shown in this catalog are designed and produced mainly for such general purpose electronic equipment as audio and visual equipment, home appliances, office equipment and information processing and communication equipment. If you wish to use these components in medical equipment, transportation equipment, (automotive, train, ships, etc), aircraft, spacecraft, security systems or other equipment that requires high security application, you are required to confirm application through your own testing and own judgment. Regardless of a component intended use, if high safety application is required, it is recommended that you shall establish a protective or redundant circuit and shall conduct own evaluation test. It is highly recommended that you shall follow our "Cautions for using" Also it is recommended that you shall obtain technical specifications from Elna Co., Ltd to ensure that the component is suitable for your intended use. It is not our responsibility for any kind of problems without technical specifications. Specifications and dimensions shown in this catalog are subject to change without prior notice. NOTE CAT.No.2013/2014E Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. 217 &$71R( (R) LIST OF CONTENTS %HVXUHWRUHDG&DXWLRQVIRU8VLQJ(OHFWURO\WLF&DSDFLWRUVEHIRUHXVLQJWKRVHSURGXFWV $OXPLQXP(OHFWURO\WLF&DSDFLWRUV NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. 1 CAT.No.2013/2014E Electric Double Layer Capacitors (OHFWULF'RXEOH/D\HU&DSDFLWRUV '<1$&$332:(5&$3 Aluminum Electrolytic Capacitors for Audio $OXPLQXP(OHFWURO\WLF&DSDFLWRUVIRU$XGLR Large Capacitance Aluminum Electrolytic Capacitors /DUJH&DSDFLWDQFH $OXPLQXP(OHFWURO\WLF&DSDFLWRUV Miniature Aluminum Electrolytic Capacitors 0LQLDWXUH$OXPLQXP(OHFWURO\WLF&DSDFLWRUV Chip Type Aluminum Electrolytic Capacitors &KLS7\SH$OXPLQXP(OHFWURO\WLF&DSDFLWRUV Aluminum Electrolytic Capacitors With Conductive Polymer Solid Electrolyte $OXPLQXP(OHFWURO\WLF&DSDFLWRUV :LWK&RQGXFWLYH3RO\PHU6ROLG(OHFWURO\WH (R) ENVIRONMENTAL (Green Cap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b less PVC (OHFWULFGRXEOHOD\HUFDSDFLWRUV 7HUPLQDODUHDSODWLQJ 3ODWLQJWKLFNQHVV 6LQJOHFHOO 6QRU6Q&X P 6OHHYOHVV 3LOHGFHOO 6Q P 3(7 6QRU6Q&X P 3(7 /HDGWHUPLQDO 6Q P 3(7 6QDSLQWHUPLQDO 6Q P 3(7 &DWHJRU\ &LRQFHOO 60' /HDGW\SH /DUJH FDSDFLWDQFH 6FUHZWHUPLQDO 6OHHYH 3(7 1RWH6Q7LQ%L%LVPXWK&X&RSSHU 3OHDVHLQTXLUHZKHQKRSLQJH[FOXGLQJWKHDERYHPHQWLRQHGWHUPLQDOSODWLQJDQGVOHHYH CAT.No.2013/2014E 2 NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. (R) About the Sn whisker 1. Sn whisker-generating mechanism on the lead wire On the surface of the lead wire, Sn and aluminum will get mixed instead of getting dissolved. The surface condition is complex, aluminum will expand due to the heat and humid causing the oxidation and hydration. This reaction will cause the inner stress and influence the development of the whisker. 2. Generation control of the Sn whisker In the past, Sn whisker was reduced by adding a lead(Pb). Aluminum electrolytic capacitor was also using the Sn-plate with Pb on the lead wire. But due to environmental regulation such as the "ELV" and "RoHS", Pb was strictly prohibited since 2000. Lead wire not containing the Pb was used, which caused the Sn whisker problem to happen again. Since Sn whisker is influenced by the mixture of aluminum, method of reducing the aluminum on the welding surface was to clean the lead terminal using the alkali. However since the welding area of the large case size is larger compared to the small ones, whisker will generate even if it is cleaned by alkali. This whisker will scatter outside of the capacitor and potentially cause the short-circuit. Countermeasure of keeping the whisker inside the capacitor is being discussed. 3. Prevention of scattering of Sn whisker In the past Sn-plate with Pb was used and recently plate with Bi is being introduced to prevent the whisker from generating. However the whisker will still generate under the temperature and moisture condition. Therefore, the current method of preventing the whisker will not completely prevent the whisker from generating. In our company, we are developing and supplying products with design of preventing the whisker from scattering outside the capacitor. This design corresponds to series such as the RJD and RJE for 105 use, RKD and RPK for 125 use. If it is required for the other series, please feel free to make an inquiry. Sectional view of capacitor Standard type Whisker proof type Rubber hole Not covered NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. 3 Rubber hole covered CAT.No.2013/2014E (R) PACKAGING SPECIFICATION 2UGHULQJ,QIRUPDWLRQ Please designate the number of capacitors you order in integral multiples of the minimum packing number of units. $OXPLQXP(OHFWURO\WLF&DSDFLWRUV Classification Aluminum Electrolytic Capacitors With Conductive Polymer Solid Electrolyte Chip Type 04 Type Chip Type 04 Type 69 Type 331Type or Others Quantity (PCS.) Size DxL (mm) 5 to 6.3x4.5 to 7.7 8x6.7 to 7.7 10x7.7 6.3x8 8x8 10x12.5 3, 4 5 to 8x6.7, 6.3x7.7 8x10, 10x10 to 10.5 12.5x13.5 9.5x19 to 24 3 to 5x5, 4x7 5x7 6.3x5, 6.3x7 8x5 to 7 5 to 6.3x11, 11.5, 15 8x11.5,12 8x15 8x20 10x12.5 10x16 10x20 10x25 to 30 12.5x15 12.5x20 to 25 12.5x30 to 35 12.5x40 16x16 to 20 16x25 16x31.5 to 35.5 16x40 18x16 to 31.5 18x35.5 18x40 22 to 25 30 to 35 36 to 101 Forming lead Long lead Taping (flat box) Packaging box Vinyl bag 200 200 200 2,000 2,000 1,000 200 200 200 200 200 200 200 200 200 200 200 200 100 100 100 100 100 100 50 50 50 50 50 2,000 2,000 2,000 2,000 2,000 2,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 500 500 500 500 500 200 100 100 100 250 inyl bag Packaging box Taping (reel) Packaging quantity One reel Packaging quantity Box 200 200 200 2,000 2,000 1,000 2,000 1,000 500 20,000 10,000 5,000 200 200 200 200 200 200 200 200 200 200 100 100 100 100 200 200 100 100 100 100 100 100 100 5,000 4,000 2,000 2,000 2,000 2,000 2,000 1,000 4,000 1,000 500 500 500 1,000 2,000 2,000 1,000 1,000 1,000 800 1,000 1,000 800 2,000 2,000 2,000 1,000 2,000 1,000 1,000 1,000 500 500 500 500 500 500 500 20,000 20,000 20,000 10,000 20,000 10,000 8,000 8,000 5,000 5,000 4,000 3,000 4,000 4,000 3,000 250 250 250 2,000 1,500 1,500 250 1,500 1,000 1,000 500 2,000 1,000 500 200 400 5,000 4,000 2,000 10,000 5,000 2,000 1,000 (2,000) 100 50 Please inquire. (OHFWULF'RXEOH/D\HU&DSDFLWRUV Quantity (PCS.) Series DX, DXJ, DXN, DXSH or V Terminal DX, DXJ, DXNV Terminal DH, DHL, DHC, DBJ DK, DB, DBN, DBS DC, DCK DS, DSK DVN DVL Long lead Case sizemm 11.5 19 13.5 21.5 6.8 4.8 6.8 12.5x8.5 12.5x10.5 Standard lead Taping (reel) Taping (flat box) inyl bag Packaging box Vinyl bag Packaging box Box Packaging quantity 200 100 200 100 200 8,000 2,000 4,000 2,000 6,000 One reel Packaging quantity 2,000 10,000 1,500 to 2,000 6,000 to 10,000 300 1,500 250 1,250 Quantity (PCS.) Series DY DZ DZN DZH DP DZP Long lead Case sizemm 6.3 8 10 12.5x23 12.5x31.5 16x20 16x25 16x31.5 to 35.5 18 25 35 35 51 8.5x17x16 8.5x17x24 10.5x21x34 10.5x21x39 Forming lead Taping (reel) Packaging box Vinyl bag Packaging box Box Packaging quantity One reel Packaging quantity 200 200 200 100 100 100 100 50 50 1,000 1,000 1,000 500 500 500 500 200 250 50 or 100 50 or 100 50 32 200 200 100 100 200 100 100 100 100 2,000 1,000 500 1,000 2,000 1,000 1,000 1,000 800 2,000 1,000 500 500 500 250 250 250 20,000 8,000 3,000 4,000 3,000 2,000 1,500 1,500 Please inquire. CAT.No.2013/2014E Taping (flat box) inyl bag 4 NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use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o.2013/2014E (R) ALUMINUM ELECTROLYTIC CAPACITORS Type List for Miniature and Chip Type Aluminum Electrolytic Capacitors : Apply to those capacitors with rated voltage of 250V or less. Special Type Standard Type Ultra-miniature Type Surface Mounting Type Reflow Solding Resistance Color of sleeve JIS Configuration Note 105 - 55 6.3 2.5 120 to 1200 Silver 32 Ultra Low ESR Conductive Polymer Chip 105 - 55 10 2.5 100 to 1200 Silver 32 105 - 55 25 2.5 15 to 390 Silver 32 Super Low ESR Conductive Polymer Chip 105 - 55 35 2.5 10 to 1200 Silver 32 34 Low ESR Conductive Polymer Chip 105 - 55 35 2.5 10 to 1000 Silver 32 36 Super Low ESR, High Temp. Conductive Polymer Chip 125 - 55 25 2.5 10 to 1000 Silver 32 105 - 55 63 35 18 to 100 Silver 32 105 - 55 10 2.5 10 to 1500 Silver 04 Silver 32 Super Low ESR Conductive Polymer Chip, 4.5mmL PVM 32 PVH PVK PVS 38 Super Low ESR, High Voltage Conductive Polymer Chip PRM 40 Super Low ESR Conductive Polymer RV2 50 5.5mm L RV 51 Higher Capacitance Range RV3 52 RV4 53 5000hrs 30 10000hrs PV2 3000hrs 28 2000hrs 26 PVX 1000hrs PVG For Audio Ultra Low ESR Conductive Polymer Chip Applications Reliability at 105 Low Impedance Anti-cleaning solvent Thin and small Size Feature Series Page Polymer Category : New series : Upgrade Category Temp. Range Max. Min. Rated Voltage Range V.DC Max. Rated capacitance Range F Min. 85 - 40 50 4 0.22 to 220 85 - 40 100 6.3 10 to 2200 Silver Brown 32 High CV 85 - 40 50 6.3 4.7 to 330 Silver 32 4.5mm L 85 - 40 50 6.3 0.22 to 100 Silver 32 85 - 40 100 6.3 2.2 to 85 - 40 50 6.3 0.22 to RV5 54 High CV RVB 56 Non Polarized RVE 57 105 , 4.5mmL 105 - 40 50 6.3 RVS 58 105 , 5.5mm L 105 - 55 50 6.3 RVL 60 Long Life, 105 , 6.0mm L 105 - 55 50 RVR 62 105 , Long Life, High CV 105 - 40 50 RVJ 61 105 , Higher Capacitance RVC 64 1053000h/5000h RVD 66 105 , 3000h/5000h RVV 68 105 , Low Impedance, Long life RVZ 70 105 , Low Impedance 100 32 47 Silver 32 0.22 to 100 Silver 32 0.22 to 1500 Silver 32 6.3 0.22 to 100 Silver 32 4 0.22 to 1500 Silver 32 10 to 50 6.3 0.22 to 1000 Silver 32 100 6.3 4.7 to 1500 Silver 32 6.3 4.7 to 1500 Silver 32 105 - 40 105 - 55 105 - 55 35 Silver 32 105 - 55 35 6.3 4.7 to 125 - 40 100 10 4.7 to 125 - 40 63 10 10 to 135 - 40 35 25 22 to 330 105 - 40 50 6.3 0.22 to 47 105 - 55 100 6.3 125 - 40 63 10 32 105 - 55 35 6.3 150 to 8200 Silver 32 105 - 55 100 6.3 100 to 8200 Silver 32 125 - 40 100 10 100 to 4700 Silver 32 125 - 40 63 6.3 56 to 820 Black 88 85 - 40 50 4 0.22 to 470 105 - 55 50 6.3 0.22 to 100 Black 85 - 40 50 6.3 0.22 to 47 Blue 04 85 - 40 100 4 0.33 to 330 Blue 04 04 RVT 72 125 , Low ESR 74 125 , Higher Reliability RVX 75 135 , Higher Reliability RVI 76 105 , Non Polarized, 2000h RTJ 77 105 , Higher Capacitance, Vibration resistance RTK 78 125 , Vibration resistance RTZ 79 105 , Low Z, Higher Capacitance, Vibration resistance RTD 80 105 , Low Z, Higher Capacitance, Vibration resistance RTT 81 125 , Low ESR, Higher Capacitance, Vibration resistance 2700 Brown RVK 470 Brown 32 Silver 32 1000 Brown 32 Silver 32 Silver 32 10 to 470 Brown 32 10 to 330 Brown RYK 82 125 , Horizontal type RC3 84 5mm L, Standard R3S 85 5mm L, 105 RB3 86 5mm L, Bipolar RC2 87 7mm L, Standard R2S 88 7mm L, 105 105 - 55 50 6.3 0.33 to 100 Black RB2 89 7mm L, Bipolar 85 - 40 50 6.3 0.22 to 47 Blue 04 RE3 90 Miniaturized Standard 85 - 40 450 6.3 1 to 22000 Blue 04 R2B 92 Bipolarity Standard 100 6.3 0.47 to 4700 Blue 04 RJP 93 105 , Bipolar RJ5 94 105 , Miniaturized, High CV RJ4 96 105 , Miniaturized RJ3 98 105 , Low Impedance RLB 126 Low-leakage Current CAT.No.2013/2014E 6.3 1000 Silver 105 - 55 Silver 1500 Brown Blue 04 04 85 - 40 105 - 40 50 6.3 0.47 to 6800 Black 04 105 - 40 450 6.3 1 to 22000 Black 04 105 - 55 100 6.3 1 to 22000 Black 105 - 40 450 160 0.47 to 330 Black 105 - 55 100 6.3 1 to 15000 Black 105 - 40 400 160 0.47 to 220 Black 85 - 40 50 6.3 1 to 2200 Blue 6 Black 04 04 04 NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. (R) ALUMINUM ELECTROLYTIC CAPACITORS Type List for Miniature and Large type Aluminum Electrolytic Capacitors 105 - 55 100 6.3 3.3 to 10000 Black 04 105 - 55 100 6.3 1 to 15000 Black 04 RJF 105 105 , Extra Low Impedance, Miniaturized 105 - 40 100 6.3 5.6 to 6800 Black 04 RJL 108 105 , Long life, Low Impedance 105 - 40 100 6.3 6.8 to 6800 Black 04 RJD 110 105 , Low Impedance, High Ripple, Miniaturized 105 - 55 35 6.3 10 to 18000 Black 04 RJE 113 105 , Low Impedance, High Ripple, For Airbag 105 - 55 35 25 830 to 11000 Black 04 105 - 40 250 160 5000hrs 3000hrs 2000hrs 1000hrs 10000hrs Category Temp. Range Max. Min. Rated Voltage Range V.DC Max. Rated capacitance Range F Min. 4.7 to 220 Black Note JIS Configuration Reflow Solding Resistance 105 , Extra Low Impedance For Audio 105 , Low Impedance, Miniaturized 102 Anti-cleaning solvent 100 Applications Reliability at 105 Low Impedance Color of sleeve High Reliability Type Thin and small Size RJB Series Snap-in Type Feature RJH Page Category : New series : Upgrade RHS 114 105 , Long Life, High Ripple, For Ballast 105 - 25 450 350 1 to 120 Black 04 RHC 116 105 , Long Life, High Ripple, For Ballast 105 - 25 450 160 1 to 270 Black 04 RHD 118 105 , Long Life, High Ripple, For Ballast 105 - 25 450 160 3.3 to 330 Black 04 RKD 120 125 , Low Impedance, Miniaturized 125 - 40 100 10 100 to 6800 Black 04 RPK 122 125 , Low Impedance, Vibration resistance 125 - 40 100 10 220 to 6800 Black 04 RQA 124 150 , Low Impedance, Miniaturized 150 - 40 35 10 220 to 10000 Silver 04 RKB 125 135 , Low Impedance, Miniaturized 135 - 40 35 10 220 to Silver 04 85 85 - 40 - 25 400 450 10 - 56 to 82000 47 to 470 Black 692 105 - 25 450 160 22 to 2700 Black 692 105 - 40 100 16 560 to 47000 105 - 25 450 160 56 to 2200 Black 692 105 - 25 100 450 16 160 Black 692 LA5 128 Miniaturized LAT 130 105 , Miniaturized 105 , Standard 560 to 47000 56 to 2700 134 High-Reliability, High Ripple, Long Life LAX 136 105 , Ultra Long Life 105 - 25 400 160 56 to 1800 Black 692 LJ6 138 105 , Higher Capacitance, Ultra Long Life 105 - 25 500 200 390 to 3900 Black - LJ2 138 105 , Higher Capacitance, Ultra Long Life 105 - 25 500 200 560 to 3900 Black - LPM 140 High ripple current 85 - 25 400 250 45 to 220 Black 692 LM 140 High ripple current, Higher Capacitance 85 - 25 400 250 90 to 440 Black 622 LYX 142 105 , Ultra Long Life 105 - 25 450 350 1000 to 15000 Black 331 LYL 144 Ultra Long Life 85 - 40 450 350 1000 to 15000 Black 331 LY6 146 High Ripple, Miniaturized 85 - 25 550 400 1000 to 22000 Black 331 LY5 148 Standard 85 85 - 40 - 25 250 500 10 350 1500 to 820000 470 to 18000 Black 331 RVO 152 Chip Type (PURECAP) 85 - 40 50 6.3 0.22 to 1000 RVF 153 Chip Type (SILMIC) 85 - 40 50 10 0.33 to 100 Silver 32 RVM 154 Chip Type 105 , 2000h 105 - 55 50 6.3 1 to 470 Silver 32 RVW 155 Chip Type 105 (PURECAP) RVG 156 Chip Type RFS 157 ROS For Audio LAZ Special Type 132 Screw terminal Type LAH 6800 Silver Brown Silver 32 105 - 55 50 6.3 0.22 to 1000 85 - 40 35 6.3 3.3 to 470 Silver 32 High Grade (SILMIC ) 85 - 55 100 6.3 2.2 to 3300 Brown 04 158 High Grade (SILMIC) 85 - 40 100 16 1 to 2200 Brown 04 ROB 159 Miniaturized Standard (TONEREX) 85 - 40 100 6.3 1 to 10000 Black 04 R2A 160 7mmL 85 - 40 50 6.3 0.33 to 330 Black 04 R3A 161 5mmL 85 - 40 50 4 0.22 to 220 Raddish purple 04 RFO 162 Standard (PURECAP) 85 - 40 100 6.3 1 to 15000 Black 04 RA3 163 Miniaturized Standard 85 - 40 100 6.3 1 to 22000 Brown 04 RW5 164 105 , Miniaturized 105 - 55 25 16 100 to 15000 Black 04 RBD 165 Miniaturized Bipolar 85 - 40 100 6.3 0.47 to 4700 Black 04 LAO 166 For Audio, Higher Capacitance 85 - 40 100 16 680 to 10000 Black 692 Brown 32 Be sure to Cautions for Using Aluminum Electrolytic Capacitors , before using these products. Some series of the following table was omitted from this catalog. Please consult, when you inquire newly. Category High Reliability Type Snap-in Type For Audio Series JIS Configuration RJJ 04 105 , Low Impedance Applications 125 , Longevity RK 04 LH7 692 Higher Capacitance LAV 692 105 , Compatible with VDE LUH - 105 , Durable against Over Voltage PVO 32 For Audio, Conductive Polymer Chip ROA 04 High Grade (Cerafine) NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. 7 CAT.No.2013/2014E (R) ALUMINUM ELECTROLYTIC CAPACITORS 6\VWHPDWL]HG&ODVVLILFDWLRQRI0LQLDWXUHDQG&KLS7\SH$OXPLQXP(OHFWURO\WLF&DSDFLWRUV &RQGXFWLYH3RO\PHU Example Long life K )HDWXUHV &DWHJRU\WHPSHUDWXUH UDQJH /LIHWLPH3DJH PV2 392 Low ESR Lead terminal K Low ESR High Voltage K Low ESR 4.5mm L K )RU$XGLR +LJKYROWDJH 39* 39; /RZ(65 +LJK&9 /RZ(65 K /RZ(65 +LJK&9 /RZ(65 K K 599 RVX 59& +LJK WHPSHUDWXUH K Long Life K RV 59' RVT Long Life Bipolar K /RZLPSHGDQFH K +LJKWHPSHUDWXUH Low ESR K Long life 595 Long Life High CV K 59. 59/ /RZLPSHGDQFH K +LJKWHPSHUDWXUH /RQJOLIH K /RQJOLIH K +LJKWHPSHUDWXUH /RZLPSHGDQFH /RZ(65 K /RQJOLIH 59- 596 /DUJH &DSDFLWDQFH K PP/ K +LJK WHPSHUDWXUH 5- 54$ 0LQLDWXUL]HG 150 K +LJK WHPSHUDWXUH 5- 5- 5-( 5.% 0LQLDWXUL]HG K 6WDQGDUG K For Airbag Low Z,Miniaturized K 135 K +LJK WHPSHUDWXUH 56 56 5-' 5.' PP/ K PP/ K Low impedance Miniaturized K 125 Long life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or Ballast Long Life Miniaturized /RQJOLIH /RZLPSHGDQFH K K /RQJOLIH 5+& For Ballast Long Life Miniaturized K /RQJOLIH /RZ= 57. 57- 5/% 5+' /DUJH &DSDFLWDQFH K /DUJH &DSDFLWDQFH K /RZOHDNDJH FXUUHQW For Ballast Long Life Miniaturized K K VWDQGDUG )RU9LEUDWLRQUHVLVWDQFH CAT.No.2013/2014E PVK Low ESR High temperature K +LJK5HOLDELOLW\ +LJK&9 &RQYHUWWRFKLS 59= 59( 39+ /RZ(65 +LJK&9 K /RZLPSHGDQFH 4.5mmL K )RU$XGLR VWDQGDUG Low impedance /RZ(65 K +LJKWHPSHUDWXUH 390 6XUIDFHPRXQWGHYLFH+LJK7HPSHUDWXUH Lowimpedance ESR Low K /RZSURILOH /RZ(65 +LJK&9 5.' PVS +LJKWHPSHUDWXUH 6HULHV PRM 8 NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. (R) ALUMINUM ELECTROLYTIC CAPACITORS Systematized Classification of Large Aluminum Electrolytic Capacitors 105C High Reliability LAZ LUH LAV Long life High ripple -25/105 3000h 134 Durable against over voltage -25/105 2000h Compatible with VDE -25/105 2000h 105C standard Long life Over voltage Over voltage LAX LJ6 LJ2 Long life High reliability -25/105 5000h 136 Long life large capacitance -25/105 5000h 138 Long life large capacitance -25/105 5000h 138 LYL LPM Long life large capacitance -25/85 20000h 144 LM High ripple -25/85 2000h 140 High temperature 85C standard Large capacitance LY6 Long life large capacitance -25/85 5000h 146 Long life LY5 Large capacitance -25/85 2000h 148 Long life LA5 Standard (Miniaturized) -40/85 2000h 128 Large cap. LAG High reliability Standard -25/105 2000h High reliability LAH Miniaturized High ripple -40/105 2000h 132 Miniaturization LAT Ultra mini High ripple -25/105 2000h 130 Miniaturization L3J Wide temp. range -40/105 2000h High ripple large capacitance -25/85 2000h 140 LYX High temp large capacitance -25/105 5000h 142 Screw terminal Special Use Systematized Classification of Aluminum Electrolytic Capacitors For Audio Surfac mount device LAO RBD Large capacitance Snap-in terminal -40/85 1000h 166 RVW Bipolality PURECAP 105 -55/105 1000h 155 -40/85 2000h 165 High temperature R3A RVF Convert to chip 2000h 152 Miniaturization RFO R2A PURECAP -40/85 7mm L -40/85 1000h 162 1000h 160 2000h 153 RVM 40/85 2000h 156 -55/105 2000h 154 1000h ROS RFS SILMIC -40/85 SILMIC -40/85 1000h 158 For high grade 2000h 159 ROA Cerafine -40/85 For high grade ROB TONEREX -40/85 For high grade RA3 RW5 SILMIC -40/85 Miniaturization Miniaturized -40/85 2000h 163 High temperature RVG For high grade For high grade For high grade 1000h 161 RVO PURECAP -40/85 High temperature Long Life 5mm L -40/85 1000h 157 High temperature -40/105 1000h 164 NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. 9 CAT.No.2013/2014E (R) ALUMINUM ELECTROLYTIC CAPACITORS 3URGXFW6\PERO6\VWHPIRU$OXPLQXP(OHFWURO\WLF&DSDFLWRUV 0 9 6HULHVFRGH 5DWHGYROWDJH V\PERO 5DWHG FDSDFLWDQFH V\PERO &DVLQJ V\PERO 2SWLRQDO V\PERO 7DSLQJ /HDGIRUPLQJ V\PERO 6HULHVFRGH 3OHDVHUHIHUWRWKHSDJHRIHDFKVHULHV 5DWHGYROWDJHV\PERO :ULWHGRZQWKHUDWHGYROWDJHLWVHOIKRZHYHUZULWH5IRU9IRU9 5DWHGFDSDFLWDQFHV\PERO 7KHV\PEROGHQRWLQJQRPLQDOFDSDFLWDQFHVKDOOFRQVLVWRIWKUHHQXPHUDOV 7KHILUVWDQGVHFRQGQXPHUDOVVKDOOUHSUHVHQWWKHVLJQLILFDQWILJXUHVRI QRPLQDOFDSDFLWDQFHLQWKHXQLWRIPLFURIDUDG ) $QGWKHWKLUGQXPHUDOVKDOOUHSUHVHQWWKHQXPEHURI]HURVIROORZLQJWKHVLJQLILFDQWILJXUHV $GHFLPDOSRLQWLVH[SUHVVHGZLWK5 ([DPSOH 5DWHGFDSDFLWDQFH ) 6\PERO 0.1 R10 1 010 2.2 2R2 33 330 100 101 2200 222 33000 333 470000 474 &DSDFLWDQFHWROHUDQFHV\PERO ([DPSOH &DSDFLWDQFHWROHUDQFH 6\PERO 10% K 20% M -10 to 30% Q -10 to 50% T &DVLQJV\PERO Please refer to the page of each series. 2SWLRQDOV\PERO Plating or others are expressed. ([DPSOH 6\PERO &RQWHQWV Sn 100% plating PET sleeve (lead terminal type) U Sn-Bi plating (chip type) T Sn 100% plating (chip type) Q Based on AEC-Q200 7DSLQJ/HDGIRUPLQJV\PERO :ULWHGRZQRQHRIWKHIRUPLQJV\PEROVJLYHQRQSDJHWRIRUWDSLQJDQGOHDGIRUPLQJFDSDFLWRUV :KHQWDSLQJRUOHDGIRUPLQJLVQRWQHFHVVDU\OHDYHWKHER[HVEODQN CAT.No.2013/2014E 10 NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. (R) CHIP TYPE ALUMINUM ELECTROLYTIC CAPACITORS LAND PATTERN AND SIZE 5HFRPPHQGHGODQGSDWWHUQDQGVL]H 9HUWLFDOFKLSW\SH 6WDQGDUGW\SH (Unit : mm) ; Land Size Y W 0.8 2.2 1.0 2.6 1.4 3.0 1.9 3.6 1.9 3.6 2.1 4.0 3.0 3.5 4.0 4.0 4.0 6.0 Case Size DxL Thickness of Solder paste X 3x5.3 1.6 4x4.5, 5.3, 5.7, 5.8 1.6 5x4.5, 5.3, 5.7, 5.8 1.6 6.3x4.5, 5.3, 5.7, 5.8 1.6 6.3x7.7 1.6 8x6.5, 6.7 1.6 8x10, 10.5 2.5 10x7.7, 10, 10.5 2.5 12.5x13.5 3.2 )RU9LEUDWLRQUHVLVWDQFHXVH < : x xx < : xx < : < : < 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 )RUYLEUDWLRQUHVLVWDQFHW\SH 57-57. series < < : ; (Unit : mm) ; < : < Land Size Case Size DxL X1 X2 Y1 Y2 W1 W2 Thickness of Solder paste 8x10 2.5 2.5 3.0 3.5 4.0 3.0 0.20 10x10.5 2.5 2.5 4.0 4.5 4.0 3.0 0.20 Thickness of Solder paste RTZRTDRTT series ; (Unit : mm) Land Size < Case Size D Y W X : 8 4.0 2.5 5.0 0.2 10 4.8 3.6 5.0 0.2 12.5 6.6 3.2 7.0 0.2 16 7.8 5.0 10.5 0.2 18 8.8 5.0 10.5 0.2 < +RUL]RQWDOFKLSW\SH x SLQW\SH $ % & (Unit : mm) ' & & ' H D E G A B C D a b d e 8 pin 4.0 1.0 3.0 5.5 1.5 1.0 3.0 2.0 Thickness of Solder paste 0.15 x SLQW\SH (Unit : mm) $ % & ' & H D E G NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. 11 A B C D a b d e 6 pin 4.0 1.0 3.0 9.0 1.5 1.0 3.0 2.0 Thickness of Solder paste 0.15 CAT.No.2013/2014E SOLDERING CONDITIONS (R) ALUMINUM ELECTROLYTIC CAPACITORS Recommended soldering conditions Aluminum electrolytic capacitors (Lead free) (1) Methods See the following Methods Advisability Reflow soldering Soldering iron x Flow soldering (2) Soldering iron conditions +1 Iron tip temperature shall be 400 C5 C within the duration of 3 0 seconds. (3) Flow soldering conditions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o.2013/2014E 12 NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. SOLDERING SOLDERING ALUMINUM ELECTROLYTIC CAPACITORSCONDITIONS ALUMINUM ELECTROLYTIC CAPACITORS CONDITIONS (R) (R) Recommended soldering conditions Chip type aluminum electrolytic capacitors (Lead free) (1) Methods See the following Methods Advisability Reflow soldering Soldering iron Flow soldering x (2) Soldering iron conditions Iron tip temperature shall be 400 C5 C within the duration of 3 0 seconds. +1 (3) Reflow soldering conditions Profile Peak temp. Capacitor temp. ( C) 230 217 200 T230 180 160 C within 1. Preheating shall be under 180 120 seconds. 2. Peak temperature shall be within the peak temperature matrix. 3. For conditions exceeding the tolerances, consult with us. T217 120 T200 Time (s) T200 : Duration while capacitor head temperature exceeds 200 C (s) T217 : Duration while capacitor head temperature exceeds 217 C (s) T230 : Duration while capacitor head temperature exceeds 230 C (s) The measurement temperature point is the case top. Peak temp. matrix Series condition (1) RV2, RV3, RV4 (4, 5), RV5 (4 to 6.3), RVB, RVE, RVS (4 to 6.3), RVL, RVR (4 to 6.3), RVC (4 to 6.3), RVD (4 to 6.3), RVV (4 to 6.3), RVZ (4 to 6.3), RVT (4 to 6.3), RV, PVG (5, 6.3), PVX (5, 6.3) PV2, PVM (5, 6.3), PVH (6.3), PVK (6.3), PVS (6.3) 240 Peak temp. ( C) Peak temp. ( C) 250 230 220 210 200 0 250 240 230 0 10 20 30 40 50 60 70 T200 (s) 10 20 30 40 50 T230 (s) RV, RV4 (6.3), RV5 (8, 10), RVS (8, 10), RVR (8, 10), RVJ (8, 10), RVC (8, 10), RVD (8, 10), RVV (8, 10), RVZ (8, 10), RVT (8, 10), RVK (8, 10), RVX, RTJ, RTK, PVG (8, 10), PVX (8, 10) PVM (8, 10), PVH (8, 10), PVK (8, 10), PVS (8, 10) 250 240 230 217 0 condition (3) NOTE Peak temp. ( C) condition (2) Peak temp. ( C) RVJ (12.5), RVZ (12.5), RVK (12.5), RYK 10 20 30 40 50 60 70 T217 (s) RTZ (8, 10), RTD (8, 10), RTT (8, 10) 250 240 230 217 0 10 20 30 40 T230 (s) RTZ (12.5 to 18), RTD (12.5 to 18), RTT (12.5 to 18) Peak temp.: 260 C T217 : 90s max. T230 : 40s max. RZA (4 to 6.3), RZB (4 to 6.3), RZC (4 to 6.3) Peak temp.: 250 C T217 : 90s max. T230 : 40s max. RZA (8, 10), RZB (8, 10), RZC (8, 10) Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. 13 CAT.No.2013/2014E TAPING (R) VERTICAL CHIP TYPE ALUMINUM ELECTROLYTIC CAPACITORS 7DSLQJ &DUULHUWDSHGLPHQVLRQ WDSLQJSRODULW\5 6HULHV5<. 5959-59=59. 57=57'577 WR 1.5 +0.1 0 4.00.1 2.00.1 1.750.1 F0.1 B0.1 F0.1 W0.3 t10.1 W0.3 1.750.15 B0.2 4.00.1 2.00.1 1.5 +0.1 0 S0.1 (Unit : mm) t10.1 P0.1 t20.2 Pull-out directi A0.2 P0.1 t20.1 A0.2 Pull-out directi 0.20.05 1.5/2 1.5/2 7DSLQJSRODULW\ (Unit : mm) Outside size DxL W A B P t2 F t1 S 3x5.3 12 3.4 3.4 8.0 5.9 5.5 0.4 4x4.5 12 4.7 4.7 8.0 4.8 5.5 0.4 4x5.3 12 4.7 4.7 8.0 5.8 5.5 0.4 4x5.7, 5.8 12 4.7 4.7 8.0 6.2 5.5 0.4 5x4.5 12 5.7 5.7 12 4.8 5.5 0.4 5x5.3 12 5.7 5.7 12 5.8 5.5 0.4 5x5.7, 5.8 12 5.7 5.7 12 6.2 5.5 0.4 6.3x4.5 16 7.0 7.0 12 4.8 7.5 0.4 6.3x5.3 16 7.0 7.0 12 5.8 7.5 0.4 6.3x5.7, 5.8 16 7.0 7.0 12 6.2 7.5 0.4 6.3x7.7 16 7.0 7.0 12 8.3 7.5 0.4 8x6.5 16 8.7 8.7 12 6.8 7.5 0.4 8x6.7 24 8.7 8.7 12 7.2 11.5 0.4 8x10 24 8.7 8.7 16 11 11.5 0.4 8x10.5 24 8.7 8.7 16 11.5 11.5 0.4 10x7.7 24 10.7 10.7 16 8.2 11.5 0.4 10x10 24 10.7 10.7 16 11 11.5 0.4 10x10.5 24 10.7 10.7 16 11.5 11.5 0.4 12.5x13.5 32 13.4 13.4 24 14.5 14.2 0.5 28.4 12.5x16 28.4 7KHDOOVHULHVH[FHSW59%DQG5<. 6HULHV5<. 32 13.4 13.4 24 17 14.2 0.5 16x16.5 44 17 17 28 17.5 20.2 0.5 40.4 16x21.5 44 17 17 28 22.5 20.2 0.5 40.4 18x16.5 44 19 19 32 17.5 20.2 0.5 40.4 18x21.5 44 19 19 32 22.5 20.2 0.5 40.4 9.5x19.0 44 9.9 22.9 16 9.5 20.2 0.4 40.4 9.5x24.0 44 9.9 27.9 16 9.5 20.2 0.4 40.4 3DFNLQJTXDQWLW\ 5HHO 5HHOGLPHQVLRQ (Unit : mm) Outside size Reel dimension DxL t W (Unit : mm) 2.5 80 130.5 23 380 (330) W t Quatity (PCS.) 3, 4 14 3 3, 4 2000 5 14 3 5, 6.3 1000 6.3 18 3 8x6.5 1000 8x6.5 18 3 8x6.7 1000 8x6.7 26 3 8, 10 500 8, 10 26 3 12.5x13.5 200 12.5x16 150 12.5 34 3 16 46 3 16x16.5 18 46 3 16x21.5 75 18x16.5 125 125 9.5x19.0 45 3 9.5x24.0 45 3 18x21.5 75 9.5x19.0 400 9.5x24.0 400 5HHOPDWHULDO &DUGERDUGV\PERO5 3RO\VW\UHQHV\PERO5 CAT.No.2013/2014E Outside size DxL 14 NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS (R) LEAD FORMING /HDG)RUPLQJ In order to facilitate insertion into printed circuit board, lead wires are cut or formed. Product Size Table Forming name Unit: mm Lead forming symbol Dimension D Style 4 B F1 5 A F12 4 to 5 B F1 6.3 B F1 8 A F4 4 to 8 B F 4 to 8 B 10 to 12.5 A 16 to 18 A 4 to 8 B 10 to 12.5 A 16 to 18 A F Outline drawing (Lead pitch) (Case diameter) F10 2.0 3URFHVVHGVW\OH$ 3URFHVVHGVW\OH% L F0.5 D 3.5 D Forming cut F0.5 2.5 L 4.50.5 4.50.5 0D[ PP/PP/0D[ 5.0 F F 7.5 S1 3URFHVVHGVW\OH$ 3URFHVVHGVW\OH% 5.0 7.5 Snap-in 0D[ PP/PP/0D[ 4.50.5 D F0.5 4.50.5 F0.5 L L F49 Forming cut (restrict series) 3.1-0.2 F58 10 F49 16 to 18 D 10 to 12.5 D 5.0 F0.5 F51 +0.4 F51 3.20.5 10 to 12.5 F49 F0.5 S1 D S1 L L 7.5 16 to 18 F51 3.30.5 F58 D F0.5 L Forming name Lead forming symbol Dimension F D 0 1 8 5.5 1.0 G59, G60 8 3.6 1.0 G9, G10 10 to 12.5 5.5 1.0 G55, G56 12.5 7.5 2.5 10 to 12.5 3.6 1.0 0.95 4.9 (Lead pitch) (Case diameter) G9, G10 Outline drawing L 10.5 00.5 G59, G60 For 90 side mount of case D 3.5 5.0 12.5 G95, G96 G99, GA0 10 1.0 1.9 GAS, GAT 10 to 12.5 4.5 1.0 G9, G10 16 to 18 5.5 1.0 16 to 18 4.5 1.0 F0.5 7.5 GAS, GAT NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. 15 F0.5 G9, G55, G59, G95, G99, GAS G10, G56, G60, G96, GA0, GAT CAT.No.2013/2014E TAPING (R) MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS Taping For automatic insertion (radial lead type) Processed style A P P2 Processed style B P P2 6 h1 D Processed style C P P2 6 h1 6h 6 h1 D D P1 H W1 W W0 D0 P0 t D0 W1 P0 d F H0 H d W W0 W1 F D0 P0 P1 H d F W W0 P1 The shape of a lead wire sandwiched by the mounting strips may differ from the ones shown in the figures. Product Size Table Unit: mm 5L to 7L Item Symbol Tolerance 3 to 8(except 8x7L) T36 Lead forming symbol Style Lead-wire diameter d 0.05 4 to 8 T58 T2 A or B B 0.4 or 0.45 Lead to lead distance F 0.8 -0.2 Height of component from tape center H 0.75 -0.5 18.5 17.5 Lead-wire clinch height H0 0.5 16.0 Pitch of componet P 1.0 12.7 Feed hole pitch P0 0.3 12.7 Hole center to lead P1 0.5 Hole center to component P2 1.0 6.35 Tape width W 0.5 18.0 Hold down tape width W0 Min. 6.0 Feed hole position W1 0.5 9.0 Max. lead protrusion Max. 1.0 Feed hole diameter D0 0.2 4.0 Alignment of component to center 6h 1.0 0 Alignment of component to center 6h1 1.0 0 t 0.2 0.7 Total tape thickness CAT.No.2013/2014E 16 2.5 5.0 5.1 3.85 NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. (R) MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS TAPING 7DSLQJ For automatic insertion (radial lead type) Product Size Table Unit: mm 11L to 25L Item Symbol Tolerance 5, 6.3 T36 T2 8 10 12.5 T2 T2 T4 Lead forming symbol Style Lead-wire diameter d 0.05 Lead to lead distance F 0.8 -0.2 Height of component from tape center H 0.75 -0.5 Lead-wire clinch height H0 0.5 Pitch of componet P 1.0 12.7 15.0 Feed hole pitch P0 0.3 12.7 15.0 Hole center to lead P1 0.5 (10 to 18 0.7) Hole center to component P2 1.0 Tape width W 0.5 18.0 Hold down tape width W0 Min. 6.0 Feed hole position W1 0.5 9.0 Max. lead protrusion Max. 1.0 Feed hole diameter D0 0.2 4.0 Alignment of component to center h 1.0 0 Alignment of component to center h1 1.0 0 t 0.2 0.7 Total tape thickness T58 A or B B A 0.6 0.5 or 0.6 2.5 18.5 5.0 17.5 18.5 20.0 16.0 5.1 3.85 6.35 18.5 5.0 7.5 3DUWQXPEHULQJV\VWHP H[DPSOH6HULHV5-%9)PPSLWFKWDSLQJ 5-% 6HULHVFRGH 5DWHGYROWDJH V\PERO 9 0 * 5DWHGFDSDFLWDQFH V\PERO &DSDFLWDQFH WROHUDQFHV\PERO &DVLQJ V\PERO NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. 17 7 7DSLQJ V\PERO CAT.No.2013/2014E PACKING ALUMINUM ELECTROLYTIC CAPACITORS (R) 6WDQGHUGSDFNLQJVSHFLILFDWLRQRIDOXPLQLXPHOHFWURO\WLFFDSDFLWRUV WDSLQJDUWLFOH Chip type Classification Aluminium electrolytic capacitors with conductive polymer solid electrolyte Aluminium electrolytic capacitors Reel Reel Dampproof bag Packing style Inner box Inner box Classification Lead terminal type Flat box Packing style Inner box Please inquire for details. CAT.No.2013/2014E 18 NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. (R) ALUMINUM ELECTROLYTIC CAPACITORS PACKING 6WDQGHUGSDFNLQJVSHFLILFDWLRQRIDOXPLQLXPHOHFWURO\WLFFDSDFLWRUV ORQJOHDGOHDGIRUPLQJ Size 3 to 10 12.5 to 18 Plastic bag Small box Inner box Inner box Packing style Size 10 to 18 22 or more Tray Inner box Inner box Outer box Packing style Please inquire for details. NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. 19 CAT.No.2013/2014E (R) MEMO CAT.No.2013/2014E 20 (R) ALUMINUM ELECTROLYTIC CAPACITORS WITH CONDUCTIVE POLYMER SOLID ELECTROLYTE Aluminum Electrolytic Capacitors With Conductive Polymer Solid Electrolyte $OXPLQXP(OHFWURO\WLF&DSDFLWRUV :LWK&RQGXFWLYH3RO\PHU6ROLG(OHFWURO\WH NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. 21 CAT.No.2013/2014E TECHNICAL NOTE ALUMINUM ELECTROLYTIC CAPACITORS WITH CONDUCTIVE POLYMER SOLID ELECTROLYTE (R) &DXWLRQVIRU8VLQJ$OXPLQXP(OHFWURO\WLF&DSDFLWRUV:LWK&RQGXFWLYH3RO\PHU6ROLG(OHFWURO\WH 3OHDVHEHVXUHWRUHDGWKLVVSHFLILFDWLRQEHIRUHXVLQJWKLVSURGXFW %HIRUHSODFLQJDQRUGHUSOHDVHLQTXLUHDERXWWKH3URGXFW6SHFLILFDWLRQWRFKHFNGHWDLOV &DXWLRQVIRU8VDJH JHQHUDWLRQE\ULSSOHFXUUHQW &DSDFLWDQFHH[SUHVVHGLQWKHYDOXHDW& +] LQFUHDVHV ZLWK LQFUHDVHG WHPSHUDWXUH DQG GHFUHDVHVZLWKGHFUHDVLQJWHPSHUDWXUH 7DQJHQW RI ORVV DQJOH WDQ H[SUHVVHG LQ WKH YDOXHDW&+]LVWHPSHUDWXUHLQGHSHQGHQW (TXLYDOHQW VHULHV UHVLVWDQFH (65 H[SUHVVHG LQ WKH YDOXH DW & N+] LV WHPSHUDWXUH LQGHSHQGHQW /HDNDJH FXUUHQW LQFUHDVHV ZLWK LQFUHDVHG WHPSHUDWXUH DQG GHFUHDVHV ZLWK GHFUHDVLQJ WHPSHUDWXUH 6ROLGFRQGXFWLYHSRO\PHUDOXPLQXPHOHFWURO\WLF FDSDFLWRUVDUHSRODUL]HG 8VLQJ D FDSDFLWRU ZLWK UHYHUVHG SRODULW\ FDXVHV DEQRUPDOFXUUHQWIORZUHVXOWLQJLQDVKRUWFLUFXLW &DQQRW XVH IRU WKH FLUFXLW WR ZKLFK WKH SRODULW\ UHYHUVHVE\ULSSOHYROWDJH 3URKLELWHG&LUFXLWV 6LQFHOHDNDJHFXUUHQWSUREOHPPD\DULVHFDSDFLWRUV FDQQRWEHXVHGLQWKHIROORZLQJFLUFXLWV &RXSOLQJFLUFXLWV &LUFXLWVJUHDWO\DIIHFWHGE\OHDNDJHFXUUHQW 8VHFDSDFLWRUVZLWKLQWKHUDWHGYROWDJH 7KH DSSOLFDWLRQ RI YROWDJHV H[FHHGLQJ WKH UDWHG YROWDJH FDQ VLJQLILFDQWO\ LQFUHDVH OHDNDJH FXUUHQW UHVXOWLQJ LQ D VKRUW IDLOXUH 3OHDVH GR QRW DSSO\ D YROWDJHH[FHHGLQJWKHUDWHGYROWDJH %HFDUHIXORIH[FHVVLYHUXVKFXUUHQW 8VLQJ FDSDFLWRUV LQ WKH FLUFXLW ZKHUH H[FHVVLYH UXVK FXUUHQW SDVVHV PD\ FDXVH FKDUDFWHULVWLF GHWHULRUDWLRQ RU D VKRUW :KHQ WKH UXVK FXUUHQW H[FHHGV $ ZH UHFRPPHQG XVH RI SURWHFWLRQ FLUFXLWVWRHQVXUHKLJKUHOLDELOLW\ 8VH WKH DOORZDEOH ULSSOH YROWDJH DQG WKH UDWHG ULSSOHFXUUHQWEHORZWKHVSHFLILHGYDOXHV :KHQVXSHULPSRVLQJDULSSOHYROWDJHRQD'&ELDV YROWDJH H[HUFLVH FDUH WKDW WKH SHDN YROWDJH YDOXH GRHV QRW H[FHHG WKH UDWHG YROWDJH DQG GRHV QRW UHYHUVHWKHSRODULW\ 7KHUDWHGULSSOHFXUUHQWVKDOOEHEHORZWKHVSHFLILHG YDOXH &KDQJHVLQFKDUDFWHULVWLFVGXHWRRSHUDWLQJ WHPSHUDWXUH 7KH FKDUDFWHULVWLFV RI VROLG FRQGXFWLYH SRO\PHU DOXPLQXP HOHFWURO\WLF FDSDFLWRUV YDU\ E\ WHPSH UDWXUH DV IROORZV 7KHVH YDULDWLRQV DUH WHPSRUDU\ DQG UHFRYHU ZKHQ WKH WHPSHUDWXUH JRHV EDFN H[FHSW IRU WKH FDVH RI FKDUDFWHULVWLF GHWHULRUDWLRQ EHFDXVHRIKLJKWHPSHUDWXUHVRYHUDORQJWLPH 1RWHWKDWXVLQJFDSDFLWRUVRYHUWKHXSSHUFDWHJRU\ WHPSHUDWXUHLQFUHDVHVOHDNDJHFXUUHQWUHVXOWLQJLQ DVKRUWDQGGHVWUXFWLRQ %HFDUHIXORIWKHFDSDFLWRUWHPSHUDWXUHFRQVLGHULQJ QRW RQO\ WKH DPELHQW WHPSHUDWXUH ZKHUH WKH HTXLSPHQWLVSODFHGDQGWKHWHPSHUDWXUHLQVLGHWKH HTXLSPHQWEXWDOVRUDGLDWLRQKHDWIURPWKHKHDWLQJ HOHPHQW LQVLGH WKH HTXLSPHQW DQG VHOIKHDW CAT.No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esign, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use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esign, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use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a G ,VRSURS\ODOFRKRO SURSDQRO &OHDQLQJFRQGLWLRQV D 7KH WHPSHUDWXUH RI FOHDQLQJ VROXWLRQ VKDOO EH OHVVWKDQ& E 8VHLPPHUVLRQRUXOWUDVRQLFZDYHVZLWKLQWZR PLQXWHV CAT.No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o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esign, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. (R) MEMO 25 CAT.No.2013/2014E PVG ALUMINUM ELECTROLYTIC CAPACITORS WITH CONDUCTIVE POLYMER SOLID ELECTROLYTE *5((1 &$3 &KLS7\SH /RZ (65 60' Y& KRXUV (R) $QWL FOHDQLQJ VROYHQW Super low E.S.R. and high ripple current are realized. Guaranteed 105, 2000 hours. High CV Low ESR High CV Low ESR PVX PVG PVM Specifications Performance -55 to 105 20 Tolerance at rated capacitance (%) (20,120Hz) Less than 0.2CV Leakage current (A) Note C : Rated capacitance (F) ; V : Rated voltage (V) (20) (20,120Hz) Less than 0.12 Tangent of the loss angle (tan) Impedance ratio (max.) Characteristics at high and low temperature -25 / 20 : 1.15 -55 / 20 : 1.25 500 hours The initial specified value or less Within 20% of initial value 150% or less of the initial specified value 150% or less of the initial specified value Test time Leakage current Percentage of capacitance change Tangent of the loss angle E.S.R. change Bias Humidity 60, 90 to 95%RH (100kHz) 2000 hours The initial specified value or less Within 20% of initial value 150% or less of the initial specified value 150% or less of the initial specified value Test time Leakage current Percentage of capacitance change Tangent of the loss angle E.S.R. change Endurance (105) (Applied ripple current) The capacitors shall be subject to 1000 cycles each consisting of charge with the surge voltage specified at 105 for 30 seconds through a protective resister (Rc=1k) in 6 minutes per cycle. Surge voltage : 1.15 times of rated voltage Characteristics of applied The initial specified value or less Within 20% of initial value 150% or less of the initial specified value 150% or less of the initial specified value Leakage current Percentage of capacitance change Tangent of the loss angle E.S.R. change surge voltage 0.5% per 1000 hours maximum (Confidence level 60% at 105) Failure tare *Note : If any doubt arises, measure the leakage current after following voltage application treatment. Voltage application treatment : DC rated voltage are applied to the capacitors for 120 minutes at 105. Outline Drawing Unit : mm 3DUWQXPEHULQJV\VWHP H[DPSOH9) 39* (C) A0.2 0.40.2 0.3MAX 6HULHVFRGH 5DWHGYROWDJH V\PERO 9 0 ( 5DWHGFDSDFLWDQFH V\PERO &DSDFLWDQFH WROHUDQFHV\PERO &DVLQJ V\PERO 7DSLQJ V\PERO (C) (P) B0.2 D0.5 Aluminum Electrolytic Capacitors With Conductive Polymer Solid Electrolyte Item Category temperature range () W L0.3 ( ) : Reference size D 5 6.3 6.3 8 10 L 5.7 5.7 7.7 7.7 7.7 A 5.3 6.6 6.6 8.4 10.4 B 5.3 6.6 6.6 8.4 10.4 C 2.3 2.7 2.7 3.0 3.2 0.5 0.5 0.5 0.5 0.7 W to 0.8 to 0.8 to 0.8 to 0.8 to 1.1 P 1.5 2.0 2.0 3.1 4.7 Casing symbol E60 F60 F80 G80 H80 Soldering conditions are described on page 13. Land pattern size are described on page 11. The taping specifications are described on page 14. CAT.No.2013/2014E 26 NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. PVG ALUMINUM ELECTROLYTIC CAPACITORS WITH CONDUCTIVE POLYMER SOLID ELECTROLYTE (R) Standard Ratings Rated voltage (V) 2.5 4 6.3 Case ESR Rated ripple current Case ESR Rated ripple current Case ESR Rated ripple current DxL (mm) (m max.) (mArms) DxL (mm) (m max.) (mArms) DxL (mm) (m max.) (mArms) 120 8 4000 150 5x5.7 8 4000 8 4000 6.3x5.7 6 4500 6.3x5.7 7 4300 Item Rated capacitance (F) 220 5x5.7 5x5.7 6.3x5.7 6 4500 6.3x7.7 7 4600 330 6.3x5.7 6 4500 6.3x7.7 6 4800 8x7.7 7 4700 390 6.3x5.7 6 4500 6.3x7.7 6 4800 470 6.3x7.7 6 4800 8x7.7 6 5000 8x7.7 560 6.3x7.7 6 4800 8x7.7 680 6 5000 820 10x7.7 7 4900 8x7.7 7 4700 7 4700 1000 8x7.7 6 5000 10x7.7 6 5200 1200 10x7.7 6 5200 (Note) Rated ripple current : 105, 100kHz ; E.S.R. : 20, 100kHz NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. 27 CAT.No.2013/2014E Aluminum Electrolytic Capacitors With Conductive Polymer Solid Electrolyte 270 PVX ALUMINUM ELECTROLYTIC CAPACITORS WITH CONDUCTIVE POLYMER SOLID ELECTROLYTE *5((1 &$3 &KLS7\SH /RZ (65 60' Y& KRXUV (R) $QWL FOHDQLQJ VROYHQW Super low E.S.R. and high ripple current are realized. Guaranteed 105, 2000 hours. High CV Low ESR High CV Low ESR PVM PVX PVH Specifications Performance -55 to 105 20 Tolerance at rated capacitance (%) (20,120Hz) Less than 0.2CV Leakage current (A) Note C : Rated capacitance (F) ; V : Rated voltage (V) (20) (20,120Hz) Less than 0.12 Tangent of the loss angle (tan) Impedance ratio (max.) Characteristics at high and low temperature -25 / 20 : 1.15 -55 / 20 : 1.25 500 hours The initial specified value or less Within 20% of initial value 150% or less of the initial specified value 150% or less of the initial specified value Test time Leakage current Percentage of capacitance change Tangent of the loss angle E.S.R. change Bias Humidity 60, 90 to 95%RH (100kHz) 2000 hours The initial specified value or less Within 20% of initial value 150% or less of the initial specified value 150% or less of the initial specified value Test time Leakage current Percentage of capacitance change Tangent of the loss angle E.S.R. change Endurance (105) (Applied ripple current) The capacitors shall be subject to 1000 cycles each consisting of charge with the surge voltage specified at 105 for 30 seconds through a protective resister (Rc=1k) in 6 minutes per cycle. Surge voltage : 1.15 times of rated voltage Characteristics of applied The initial specified value or less Within 20% of initial value 150% or less of the initial specified value 150% or less of the initial specified value Leakage current Percentage of capacitance change Tangent of the loss angle E.S.R. change surge voltage 0.5% per 1000 hours maximum (Confidence level 60% at 105) Failure tare *Note : If any doubt arises, measure the leakage current after following voltage application treatment. Voltage application treatment : DC rated voltage are applied to the capacitors for 120 minutes at 105. Outline Drawing Unit : mm 3DUWQXPEHULQJV\VWHP H[DPSOH9) 39; (C) A0.2 0.40.2 0.3MAX 6HULHVFRGH 5DWHGYROWDJH V\PERO 9 0 ( 5DWHGFDSDFLWDQFH V\PERO &DSDFLWDQFH WROHUDQFHV\PERO &DVLQJ V\PERO ( 7DSLQJ V\PERO (C) (P) B0.2 D0.5 Aluminum Electrolytic Capacitors With Conductive Polymer Solid Electrolyte Item Category temperature range () W L0.3 ( ) : Reference size D 5 6.3 8 10 L 5.7 5.7 6.7 7.7 A 5.3 6.6 8.4 10.4 B 5.3 6.6 8.4 10.4 C 2.3 2.7 3.0 3.2 0.5 0.5 0.5 0.7 W to 0.8 to 0.8 to 0.8 to 1.1 P 1.5 2.0 3.1 4.7 Casing symbol E60 F60 G70 H80 Soldering conditions are described on page 13. Land pattern size are described on page 11. The taping specifications are described on page 14. CAT.No.2013/2014E 28 NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. ALUMINUM ELECTROLYTIC CAPACITORS WITH CONDUCTIVE POLYMER SOLID ELECTROLYTE (R) PVX Standard Ratings Rated voltage (V) 2.5 4 6.3 10 Case ESR Rated ripple current Case ESR Rated ripple current Case ESR Rated ripple current Case ESR Rated ripple current DxL (mm) (m max.) (mArms) DxL (mm) (m max.) (mArms) DxL (mm) (m max.) (mArms) DxL (mm) (m max.) (mArms) 100 15 3100 5x5.7 15 3100 120 6.3x5.7 13 3300 10 3800 Item Rated capacitance (F) 5x5.7 5x5.7 10 3800 5x5.7 10 3800 5x5.7 15 3100 220 5x5.7 10 3800 5x5.7 10 3800 6.3x5.7 9 4000 270 5x5.7 10 3800 330 6.3x5.7 9 4000 6.3x5.7 390 6.3x5.7 9 4000 470 8x6.7 8 4300 560 8x6.7 8 680 8x6.7 8 9 8x6.7 8 4300 8x6.7 10 3800 8x6.7 8 4300 8 4300 8x6.7 8 4300 4300 8x6.7 8 4300 4300 10x7.7 8 4600 10x7.7 8 4600 10x7.7 1200 10x7.7 8 4600 4000 8x6.7 1000 820 8x6.7 8 10x7.7 10 4000 10x7.7 8 4600 4600 (Note) Rated ripple current : 105, 100kHz ; E.S.R. : 20, 100kHz NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. 29 CAT.No.2013/2014E Aluminum Electrolytic Capacitors With Conductive Polymer Solid Electrolyte 150 PV2 ALUMINUM ELECTROLYTIC CAPACITORS WITH CONDUCTIVE POLYMER SOLID ELECTROLYTE *5((1 &$3 &KLS7\SH 60' /RZ (65 Y& KRXUV (R) $QWL FOHDQLQJ VROYHQW 4.5mm high Super low E.S.R. and high ripple current are realized. Guaranteed 105, 2000 hours. +LJK&9 /RZ3URILOH 39 390 Specifications Performance 55 to 105 20 Tolerance at rated capacitance (%) Rated voltage (V) Leakage current (A) Leakage current (A) *Note (20,120Hz) 2.5 to 20 Less than 0.2 CV 25, 35 Less than 0.5 CV C : Rated capacitance (F) ; V : Rated voltage (V) (20) (20,120Hz) Less than 0.12 Tangent of the loss angle (tan) Impedance ratio (max.) Characteristics at high and low temperature 25/20 : 1.15 55/20 : 1.25 (100kHz) Endurance (105) (Applied ripple current) Test time Leakage current Percentage of capacitance change Tangent of the loss angle E.S.R. change 2000 hours The initial specified value or less Within 20% of initial value 150% or less of the initial specified value 150% or less of the initial specified value Bias Humidity 60, 90 to 95%RH Test time Leakage current Percentage of capacitance change Tangent of the loss angle E.S.R. change 500 hours The initial specified value or less Within 20% of initial value 150% or less of the initial specified value 150% or less of the initial specified value The capacitors shall be subject to 1000 cycles each consisting of charge with the surge voltage specified at 105 for 30 seconds through a protective resister (Rc1k) in 6 minutes per cycle. Surge voltage : 1.15 times of rated voltage Characteristics of applied The initial specified value or less Within 20% of initial value 150% or less of the initial specified value 150% or less of the initial specified value Leakage current Percentage of capacitance change Tangent of the loss angle E.S.R. change surge voltage Failure tare 0.5% per 1000 hours maximum (Confidence level 60% at 105) *Note : If any doubt arises, measure the leakage current after following voltage application treatment. Voltage application treatment : DC rated voltage are applied to the capacitors for 120 minutes at 105. Outline Drawing Unit : mm Part numbering system (example : 4V120F) PV2 (C) A0.2 0.40.2 0.3MAX Series code 4 Rated voltage symbol V 121 M Rated capacitance Capacitance symbol tolerance symbol E46 Casing symbol Taping symbol (C) (P) B0.2 D0.5 Aluminum Electrolytic Capacitors With Conductive Polymer Solid Electrolyte ,WHP Category temperature range () L0.1 -0.2 W ( ) : Reference size D 5 6.3 L 4.5 4.5 A 5.3 6.6 B 5.3 6.6 C 2.3 2.7 W 0.5 to 0.8 0.5 to 0.8 P 1.5 2.0 Casing symbol E46 F46 Soldering conditions are described on page 13. Land pattern size are described on page 11. The taping specifications are described on page 14. CAT.No.2013/2014E 30 NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. PV2 ALUMINUM ELECTROLYTIC CAPACITORS WITH CONDUCTIVE POLYMER SOLID ELECTROLYTE (R) Standard Ratings Rated voltage (V) Item Rated capacitance (F) 2.5 Case ESR DxL (mm) (m max.) 4 Rated ripple current Case ESR 6.3 Rated ripple current 39 120 20 1400 180 5x4.5 ESR 10 Rated ripple current Case ESR 16 Rated ripple current Case ESR Rated ripple current (mArms) DxL (mm) (m max.) (mArms) DxL (mm) (m max.) (mArms) DxL (mm) (m max.) (mArms) DxL (mm) (m max.) (mArms) 100 150 Case 5x4.5 6.3x4.5 40 20 1300 6.3x4.5 30 1750 5x4.5 1450 6.3x4.5 16 1950 20 1400 6.3x4.5 16 2400 6.3x4.5 16 1950 270 6.3x4.5 16 2400 330 6.3x4.5 13 2400 390 6.3x4.5 16 2400 Case ESR Rated ripple current Case ESR Rated voltage (V) Item Rated capacitance (F) 20 DxL (mm) (m max.) 25 Rated ripple current (mArms) DxL (mm) (m max.) (mArms) 15 6.3x4.5 45 1150 22 6.3x4.5 45 1250 (Note) Rated ripple current : 105, 100kHz ; E.S.R. : 20, 100kHz NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. 31 CAT.No.2013/2014E Aluminum Electrolytic Capacitors With Conductive Polymer Solid Electrolyte 220 PVM ALUMINUM ELECTROLYTIC CAPACITORS WITH CONDUCTIVE POLYMER SOLID ELECTROLYTE *5((1 &$3 &KLS7\SH 60' /RZ (65 Y& KRXUV (R) $QWL FOHDQLQJ VROYHQW Super low E.S.R. and high ripple current are realized. Guaranteed 105, 2000 hours. +LJK&9 /RZ(65 390 39+ Specifications Performance 55 to 105 20 Tolerance at rated capacitance (%) Rated voltage (V) Leakage current (A) Leakage current (A) *Note (20,120Hz) 2.5 to 20 Less than 0.2 CV 25,35 Less than 0.5 CV C : Rated capacitance (F) ; V : Rated voltage (V) (20) (20,120Hz) Less than 0.12 Tangent of the loss angle (tan) Impedance ratio (max.) Characteristics at high and low temperature 25/20 : 1.15 55/20 : 1.25 (100kHz) Endurance (105) (Applied ripple current) Test time Leakage current Percentage of capacitance change Tangent of the loss angle E.S.R. change 2000 hours The initial specified value or less Within 20% of initial value 150% or less of the initial specified value 150% or less of the initial specified value Bias Humidity 60, 90 to 95%RH Test time Leakage current Percentage of capacitance change Tangent of the loss angle E.S.R. change 500 hours The initial specified value or less Within 20% of initial value 150% or less of the initial specified value 150% or less of the initial specified value The capacitors shall be subject to 1000 cycles each consisting of charge with the surge voltage specified at 105 for 30 seconds through a protective resister (Rc1k) in 6 minutes per cycle. Surge voltage : 1.15 times of rated voltage Characteristics of applied The initial specified value or less Within 20% of initial value 150% or less of the initial specified value 150% or less of the initial specified value Leakage current Percentage of capacitance change Tangent of the loss angle E.S.R. change surge voltage Failure tare 0.5% per 1000 hours maximum (Confidence level 60% at 105) *Note : If any doubt arises, measure the leakage current after following voltage application treatment. Voltage application treatment : DC rated voltage are applied to the capacitors for 120 minutes at 105. Outline Drawing Unit : mm Part numbering system (example : 4V150F) PVM (C) A0.2 0.40.2 0.3MAX Series code 4 Rated voltage symbol V 151 M Rated capacitance Capacitance symbol tolerance symbol E60 Casing symbol E Taping symbol (C) (P) B0.2 D0.5 Aluminum Electrolytic Capacitors With Conductive Polymer Solid Electrolyte ,WHP Category temperature range () W L0.3 ( ) : Reference size D 5 6.3 8 10 L 5.7 5.7 6.7 7.7 A 5.3 6.6 8.4 10.4 B 5.3 6.6 8.4 10.4 C 2.3 2.7 3.0 3.2 0.5 0.5 0.5 0.7 W to 0.8 to 0.8 to 0.8 to 1.1 P 1.5 2.0 3.1 4.7 Casing symbol E60 F60 G70 H80 Soldering conditions are described on page 13. Land pattern size are described on page 11. The taping specifications are described on page 14. CAT.No.2013/2014E 32 NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. ALUMINUM ELECTROLYTIC CAPACITORS WITH CONDUCTIVE POLYMER SOLID ELECTROLYTE (R) PVM Standard Ratings Rated voltage (V) Item Rated capacitance (F) 2.5 Case ESR DxL (mm) (m max.) 4 Rated ripple current Case ESR 6.3 Rated ripple current Case ESR (mArms) DxL (mm) (m max.) (mArms) DxL (mm) (m max.) 10 Rated ripple current Case ESR 16 Rated ripple current Case ESR Rated ripple current (mArms) DxL (mm) (m max.) (mArms) DxL (mm) (m max.) (mArms) 33 5x5.7 35 39 5x5.7 35 2070 47 5x5.7 28 2310 6.3x5.7 28 2340 56 5x5.7 28 2310 68 5x5.7 28 2310 6.3x5.7 28 2340 100 22 2610 5x5.7 24 2500 6.3x5.7 25 2530 8x6.7 24 3010 120 5x5.7 24 2500 6.3x5.7 25 2530 8x6.7 24 3010 150 22 2610 5x5.7 22 2610 6.3x5.7 15 3160 8x6.7 21 3220 10x7.7 22 3450 5x5.7 21 2670 220 5x5.7 21 2670 5x5.7 270 6.3x5.7 15 3160 8x6.7 21 3220 330 6.3x5.7 15 3160 6.3x5.7 15 3160 8x6.7 14 3950 10x7.7 19 3800 390 6.3x5.7 15 3160 8x6.7 14 3950 470 8x6.7 13 3600 8x6.7 14 3950 8x6.7 14 3950 10x7.7 19 3800 560 8x6.7 13 3600 8x6.7 14 3950 680 8x6.7 13 3600 10x7.7 14 4300 1000 10x7.7 13 4450 10x7.7 14 4300 1200 10x7.7 13 4450 Case ESR Rated ripple current Case ESR Rated ripple current Case ESR 820 Rated voltage (V) Item Rated capacitance (F) 20 DxL (mm) (m max.) 25 35 Rated ripple current (mArms) DxL (mm) (m max.) (mArms) DxL (mm) (m max.) (mArms) 150 1000 10 6.3x5.7 60 1500 15 22 6.3x5.7 50 1650 50 1800 33 10x7.7 100 1800 8x6.7 8x6.7 10x7.7 45 2100 47 8x6.7 45 2000 82 10x7.7 40 2500 39 (Note) Rated ripple current : 105, 100kHz ; E.S.R. : 20, 100kHz NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. 33 CAT.No.2013/2014E Aluminum Electrolytic Capacitors With Conductive Polymer Solid Electrolyte 180 5x5.7 2070 PVH ALUMINUM ELECTROLYTIC CAPACITORS WITH CONDUCTIVE POLYMER SOLID ELECTROLYTE *5((1 &$3 &KLS7\SH 60' /RZ (65 Y& KRXUV (R) $QWL FOHDQLQJ VROYHQW Super low E.S.R. and high ripple current are realized. Guaranteed 105, 2000 hours. PVH Specifications Performance -55 to 105 20 Tolerance at rated capacitance (%) Rated voltage (V) Leakage current (A) Leakage current (A) *Note (20,120Hz) 2.5 to 20 Less than 0.2 CV 25,35 Less than 0.5 CV C : Rated capacitance (F) ; V : Rated voltage (V) (20) (20,120Hz) Less than 0.12 Tangent of loss angle (tan) Impedance ratio (max.) Characteristics at high and low temperature -5/20 : 1.50 (100kHz) Endurance (105) (Applied ripple current) Test time Leakage current Percentage of capacitance change Tangent of the loss angle E.S.R. change 2000 hours The initial specified value or less Within 20% of initial value 150% or less of the initial specified value 200% or less of the initial specified value Damp heat, steady state (humidity) 60, 90 to 95%RH Test time Leakage current Percentage of capacitance change Tangent of the loss angle E.S.R. change 500 hours The initial specified value or less Within 20% of initial value 150% or less of the initial specified value 200% or less of the initial specified value The capacitors shall be subject to 1000 cycles each consisting of charge with the surge voltage specified at 15 to 35 for 30 seconds through a protective resister (Rc1k) in 6 minutes per cycle. Surge voltage : 1.15 times of rated voltage Leakage current Percentage of capacitance change Tangent of the loss angle E.S.R. change Characteristics of applied surge voltage The initial specified value or less Within 20% of initial value 150% or less of the initial specified value 200% or less of the initial specified value Failure tare 0.5% per 1000 hours maximum (Confidence level 60% at 105) *Note : If any doubt arises, measure the leakage current after following voltage application treatment. Voltage application treatment : DC rated voltage are applied to the capacitors for 120 minutes at 105. Outline Drawing Unit : mm Part numbering system (example : 4V150F) PVH (C) A0.2 0.40.2 0.3MAX Series code 4 Rated voltage symbol V 151 M Rated capacitance Capacitance symbol tolerance symbol F60 E Casing symbol Taping symbol (C) (P) B0.2 D0.5 Aluminum Electrolytic Capacitors With Conductive Polymer Solid Electrolyte Item Category temperature range () W L0.3 ( ) : Reference size D 6.3 8 10 L 5.7 6.7 7.7 A 6.6 8.4 10.4 B 6.6 8.4 10.4 C 2.7 3.0 3.2 W 0.5 to 0.8 0.5 to 0.8 0.7 to 1.1 P 2.0 3.1 4.7 Casing symbol F60 G70 H80 Soldering conditions are described on page 13. Land pattern size are described on page 11. The taping specifications are described on page 14. CAT.No.2013/2014E 34 NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. ALUMINUM ELECTROLYTIC CAPACITORS WITH CONDUCTIVE POLYMER SOLID ELECTROLYTE (R) PVH Standard Ratings Rated voltage (V) Item Rated capacitance (F) 2.5 Case ESR DxL (mm) (m max.) 4 Rated ripple current Case ESR 6.3 Rated ripple current Case ESR 10 Rated ripple current Case ESR 16 Rated ripple current Case ESR (mArms) DxL (mm) (m max.) (mArms) DxL (mm) (m max.) (mArms) DxL (mm) (m max.) (mArms) DxL (mm) (m max.) Rated ripple current (mArms) 33 6.3x5.7 37 39 6.3x5.7 37 2050 47 6.3x5.7 31 2250 6.3x5.7 37 2050 56 6.3x5.7 31 2250 68 6.3x5.7 27 2400 82 6.3x5.7 27 2400 8x6.7 30 2700 100 6.3x5.7 26 2450 6.3x5.7 27 2400 8x6.7 27 2800 8x6.7 30 2700 120 6.3x5.7 27 2400 8x6.7 27 2800 150 6.3x5.7 26 2450 8x6.7 25 3020 8x6.7 27 2800 10x7.7 26 3430 2050 10x7.7 26 3430 220 6.3x5.7 25 2500 8x6.7 25 3020 8x6.7 25 3020 10x7.7 24 3770 270 10x7.7 24 3770 330 8x6.7 23 3100 8x6.7 25 3020 10x7.7 20 4130 10x7.7 24 3770 470 8x6.7 23 3100 10x7.7 20 4130 10x7.7 20 4130 560 8x6.7 23 3100 680 10x7.7 20 4130 1000 10x7.7 19 4240 Case ESR Rated ripple current Case ESR Rated ripple current Case ESR Rated voltage (V) Item Rated capacitance (F) 20 DxL (mm) (m max.) 10 22 6.3x5.7 50 25 35 (mArms) DxL (mm) (m max.) (mArms) DxL (mm) (m max.) 1650 Rated ripple current (mArms) 6.3x5.7 65 1500 8x6.7 200 750 8x6.7 50 1800 10x7.7 150 1000 33 8x6.7 45 2000 10x7.7 45 2100 39 8x6.7 45 2000 10x7.7 45 2100 47 8x6.7 45 2000 82 10x7.7 40 2500 (Note) Rated ripple current : 105, 100kHz ; E.S.R. : 20, 100kHz NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. 35 CAT.No.2013/2014E Aluminum Electrolytic Capacitors With Conductive Polymer Solid Electrolyte 180 PVK ALUMINUM ELECTROLYTIC CAPACITORS WITH CONDUCTIVE POLYMER SOLID ELECTROLYTE *5((1 &$3 &KLS7\SH 60' /RZ (65 Y& KRXUV (R) $QWL FOHDQLQJ VROYHQW Super low E.S.R. and high ripple current are realized. Guaranteed 125, 1000 hours. +LJKWHPSHUDWXUH 39. 39+ Specifications Performance 55 to 125 20 Tolerance at rated capacitance (%) Rated voltage (V) Leakage current (A) Leakage current (A) *Note (20,120Hz) 2.5 to 20 Less than 0.2 CV 25,35 Less than 0.5 CV C : Rated capacitance (F) ; V : Rated voltage (V) (20) (20,120Hz) Less than 0.12 Tangent of the loss angle (tan) Impedance ratio (max.) Characteristics at high and low temperature 25/20 : 1.15 55/20 : 1.25 (100kHz) Endurance (125) (Applied ripple current) Test time Leakage current Percentage of capacitance change Tangent of the loss angle E.S.R. change 1000 hours The initial specified value or less Within 20% of initial value 150% or less of the initial specified value 150% or less of the initial specified value Bias Humidity 60, 90 to 95%RH Test time Leakage current Percentage of capacitance change Tangent of the loss angle E.S.R. change 500 hours The initial specified value or less Within 20% of initial value 150% or less of the initial specified value 150% or less of the initial specified value The capacitors shall be subject to 1000 cycles each consisting of charge with the surge voltage specified at 125 for 30 seconds through a protective resister (Rc1k) in 6 minutes per cycle. Surge voltage : 1.15 times of rated voltage Characteristics of applied The initial specified value or less Within 20% of initial value 150% or less of the initial specified value 150% or less of the initial specified value Leakage current Percentage of capacitance change Tangent of the loss angle E.S.R. change surge voltage Failure tare 0.5% per 1000 hours maximum (Confidence level 60% at 125) *Note : If any doubt arises, measure the leakage current after following voltage application treatment. Voltage application treatment : DC rated voltage are applied to the capacitors for 120 minutes at 125. Outline Drawing Unit : mm Part numbering system (example : 4V150F) PVK (C) A0.2 0.40.2 0.3MAX Series code 4 Rated voltage symbol V 151 M Rated capacitance Capacitance symbol tolerance symbol E60 Casing symbol E Taping symbol (C) (P) B0.2 D0.5 Aluminum Electrolytic Capacitors With Conductive Polymer Solid Electrolyte ,WHP Category temperature range () W L0.3 ( ) : Reference size D 6.3 8 10 L 5.7 6.7 7.7 A 6.6 8.4 10.4 B 6.6 8.4 10.4 C 2.7 3.0 3.2 W 0.5 to 0.8 0.5 to 0.8 0.7 to 1.1 P 2.0 3.1 4.7 Casing symbol F60 G70 H80 Soldering conditions are described on page 13. Land pattern size are described on page 11. The taping specifications are described on page 14. CAT.No.2013/2014E 36 NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. ALUMINUM ELECTROLYTIC CAPACITORS WITH CONDUCTIVE POLYMER SOLID ELECTROLYTE (R) PVK Standard Ratings Rated voltage (V) Item Rated capacitance (F) 2.5 Case ESR DxL (mm) (m max.) 4 Rated ripple current Case ESR 6.3 Rated ripple current Case ESR (mArms) DxL (mm) (m max.) (mArms) DxL (mm) (m max.) 10 Rated ripple current Case ESR 16 Rated ripple current Case ESR Rated ripple current (mArms) DxL (mm) (m max.) (mArms) DxL (mm) (m max.) (mArms) 6.3x5.7 37 590 39 6.3x5.7 37 590 47 6.3x5.7 31 680 6.3x5.7 37 590 56 6.3x5.7 31 680 68 6.3x5.7 27 720 82 6.3x5.7 27 720 8x6.7 30 830 100 6.3x5.7 26 770 6.3x5.7 27 720 8x6.7 27 880 8x6.7 30 830 120 6.3x5.7 27 720 8x6.7 27 880 150 6.3x5.7 26 770 8x6.7 25 960 8x6.7 27 880 10x7.7 26 930 180 10x7.7 26 930 220 6.3x5.7 25 770 8x6.7 25 960 8x6.7 25 960 10x7.7 24 1010 270 10x7.7 24 1010 330 8x6.7 23 960 8x6.7 25 960 10x7.7 20 1100 10x7.7 24 1010 470 8x6.7 23 960 10x7.7 20 1100 10x7.7 20 1100 560 8x6.7 23 960 680 10x7.7 20 1100 1000 10x7.7 19 1100 Case ESR Rated ripple current Case ESR Rated voltage (V) Item Rated capacitance (F) 20 DxL (mm) (m max.) 25 Rated ripple current (mArms) DxL (mm) (m max.) (mArms) 10 6.3x5.7 65 500 22 6.3x5.7 50 590 8x6.7 50 600 39 8x6.7 45 780 10x7.7 45 700 47 8x6.7 45 780 82 10x7.7 40 820 (Note) Rated ripple current : 125, 100kHz ; ESR : 20, 100kHz NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. 37 CAT.No.2013/2014E Aluminum Electrolytic Capacitors With Conductive Polymer Solid Electrolyte 33 PVS ALUMINUM ELECTROLYTIC CAPACITORS WITH CONDUCTIVE POLYMER SOLID ELECTROLYTE *5((1 &$3 &KLS7\SH 60' /RZ (65 Y& KRXUV (R) $QWL FOHDQLQJ VROYHQW High voltage (to 63V) High CV and low E.S.R and High ripple Current are realized Guaranteed 105, 2000 hours. +LJKYROWDJH +LJK&9 396 390 Specifications Performance 55 to 105 20 Tolerance at rated capacitance (%) (20,120Hz) Rated voltage (V) Leakage current (A) Leakage current (A) *Note 35 to 63 Less than 0.5 CV C : Rated capacitance (F) ; V : Rated voltage (V) (20) Less than 0.12 Tangent of the loss angle (tan) (20,120Hz) Impedance ratio (max.) Characteristics at high and low temperature 25/20 : 1.15 55/20 : 1.25 (100kHz) Endurance (105) (Applied ripple current) Test time Leakage current Percentage of capacitance change Tangent of the loss angle E.S.R. change 2000 hours The initial specified value or less Within 20% of initial value 150% or less of the initial specified value 150% or less of the initial specified value Bias Humidity 60, 90 to 95%RH Test time Leakage current Percentage of capacitance change Tangent of the loss angle E.S.R. change 500 hours The initial specified value or less Within 20% of initial value 150% or less of the initial specified value 150% or less of the initial specified value The capacitors shall be subject to 1000 cycles each consisting of charge with the surge voltage specified at 105 for 30 seconds through a protective resister (Rc1k) in 6 minutes per cycle. Surge voltage : 1.15 times of rated voltage Characteristics of applied The initial specified value or less Within 20% of initial value 150% or less of the initial specified value 150% or less of the initial specified value Leakage current Percentage of capacitance change Tangent of the loss angle E.S.R. change surge voltage Failure tare 0.5% per 1000 hours maximum (Confidence level 60% at 105) *Note : If any doubt arises, measure the leakage current after following voltage application treatment. Voltage application treatment : DC rated voltage are applied to the capacitors for 120 minutes at 105. Outline Drawing Unit : mm Part numbering system (example : 35V100F) PVS (C) A0.2 0.40.2 0.3MAX Series code 35 Rated voltage symbol V 101 M Rated capacitance Capacitance symbol tolerance symbol H80 Casing symbol Taping symbol (C) (P) B0.2 D0.5 Aluminum Electrolytic Capacitors With Conductive Polymer Solid Electrolyte ,WHP Category temperature range () W L0.3 ( ) : Reference size D 6.3 8 10 L 5.7 6.7 7.7 A 6.6 8.4 10.4 B 6.6 8.4 10.4 C 2.7 3.0 3.2 W 0.5 to 0.8 0.5 to 0.8 0.7 to 1.1 P 2.0 3.1 4.7 Casing symbol F60 G70 H80 Soldering conditions are described on page 13. Land pattern size are described on page 11. The taping specifications are described on page 14. CAT.No.2013/2014E 38 NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. PVS ALUMINUM ELECTROLYTIC CAPACITORS WITH CONDUCTIVE POLYMER SOLID ELECTROLYTE (R) Standard Ratings Rated voltage (V) 35 50 63 ESR Rated ripple current Case ESR Rated ripple current Case ESR Rated ripple current DxL (mm) m max. mArms DxLmm m max. mArms DxLmm m max. mArms 18 8x6.7 55 2300 22 27 6.3x5.7 40 2600 45 2600 33 39 10x7.7 50 3000 47 8x6.7 35 2800 56 10x7.7 40 3200 68 82 10x7.7 30 3500 Rated capacitance (F) 100 8x6.7 (Note) Rated ripple current : 105, 100kHz ; ESR. : 20, 100kHz NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. 39 CAT.No.2013/2014E Aluminum Electrolytic Capacitors With Conductive Polymer Solid Electrolyte Case Item PRM ALUMINUM ELECTROLYTIC CAPACITORS WITH CONDUCTIVE POLYMER SOLID ELECTROLYTE 5DGLDO,HDG7\SH *5((1 &$3 /RZ (65 Y& KRXUV (R) $QWL FOHDQLQJ VROYHQW Low E.S.R. and high ripple current are realized. Guaranteed 105, 2000 hours. 350 Specifications Performance -55 to 105 20 Tolerance at rated capacitance (%) (20,120Hz) Leakage current (A) Note Less than 0.2CV or 500 whichever is larger (after 2 minutes) Tangent of the loss angle (tan) Less than 0.12 C : Rated capacitance (F) ; V : Rated voltage (V) (20) (20,120Hz) Impedance ratio (max.) Characteristics at high and low temperature (100kHz) -55 / 20 : 1.50 2000 hours The initial specified value or less Within 20% of initial value 150% or less of the initial specified value 200% or less of the initial specified value Test time Leakage current Percentage of capacitance change Tangent of the loss angle E.S.R. change Endurance (105) (Applied ripple current) 500 hours The initial specified value or less Within 20% of initial value 150% or less of the initial specified value 200% or less of the initial specified value Test time Leakage current Percentage of capacitance change Tangent of the loss angle E.S.R. change Damp heat, steady state (humidity) 60, 90 to 95%RH The capacitors shall be subject to 1000 cycles each consisting of charge with the surge voltage specified at 105 for 30 seconds through a protective resister (Rc=1k) in 6 minutes per cycle. Surge voltage : 1.15 times of rated voltage Characteristics of applied The initial specified value or less Within 20% of initial value 150% or less of the initial specified value 200% or less of the initial specified value Leakage current Percentage of capacitance change Tangent of the loss angle E.S.R. change surge voltage 0.5% per 1000 hours maximum (Confidence level 60% at 105) Failure tare *Note : If any doubt arises, measure the leakage current after following voltage application treatment. Voltage application treatment : DC rated voltage are applied to the capacitors for 120 minutes at 105. Outline Drawing Unit : mm Part numbering system (example : 4V560F) d0.05 copper clad steel wire (tinned) PRM D0.5max. Series code F0.5 Aluminum Electrolytic Capacitors With Conductive Polymer Solid Electrolyte Item Category temperature range () L max. D 6.3 8 8 10 L 8.0 8.0 11.5 12.5 4 Rated voltage symbol V 561 M Rated capacitance Capacitance symbol tolerance symbol F2 Casing symbol Optional symbol Taping symbol 5 min. 15min. F 2.5 3.5 3.5 5.0 1.0 1.0 1.5 1.5 d 0.6 0.6 0.6 0.6 Casing symbol F2 G2 G3 H3 Soldering conditions are described on page 12. The taping specifications are described on page 17. CAT.No.2013/2014E 40 NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. ALUMINUM ELECTROLYTIC CAPACITORS WITH CONDUCTIVE POLYMER SOLID ELECTROLYTE (R) PRM Standard Ratings Rated voltage (V) Item Rated capacitance (F) 2.5 DxLmm 4 ESR Case tan Rated ripple current m max. mArms DxLmm 6.3 ESR Case tan Rated ripple current m max. mArms DxLmm 10 ESR Case tan Rated ripple current m max. mArms ESR Case DxLmm tan Rated ripple current m max. mArms 100 150 180 220 6.3x8.0 6.3x8.0 0.10 10 4680 8x8.0 0.08 10 5000 5000 270 330 390 6.3x8.0 0.10 7 5600 6.3x8.0 0.10 7 5600 560 6.3x8.0 0.10 7 5600 6.3x8.0 0.10 7 5600 0.10 10 4680 0.10 10 4680 8x8.0 0.08 10 6.3x8.0 0.10 7 5600 8x8.0 0.08 8 5700 8x8.0 0.08 7 6100 10x12.5 0.12 12 5300 680 8x8.0 0.08 6 6100 8x8.0 0.08 8 5700 820 8x8.0 0.08 6 6100 8x8.0 0.08 6 6100 10x12.5 0.12 10 5500 1000 8x8.0 0.08 6 6100 10x12.5 0.12 8 5500 10x12.5 0.12 10 5500 1200 10x12.5 0.12 8 5500 10x12.5 0.12 8 5500 1500 10x12.5 0.12 8 5500 (Note) Rated ripple current : 105 , 100kHz ; ESR : 20 , 100kHz NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. 41 CAT.No.2013/2014E Aluminum Electrolytic Capacitors With Conductive Polymer Solid Electrolyte 470 6.3x8.0 (R) MEMO CAT.No.2013/2014E 42 (R) ALUMINUM ELECTROLYTIC CAPACITORS $OXPLQXP(OHFWURO\WLF&DSDFLWRUV NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. 43 CAT.No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o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esign, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use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esign, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. 45 WKH IXQFWLRQ DV WKH SUHVVXUH YDOYH LQ RUGHU WR SUH YHQW H[SORVLRQ GXH WR WKH ULVH RI LQVLGH SUHVVXUH ZKHQ D UHYHUVH RU H[FHVVLYH YROWDJH LV DSSOLHG WR WKH FDSDFLWRU 2QFH LW KDV ZRUNHG DV D YDOYH WKH ZKROH FDSDFLWRU QHHGV WR EH UHSODFHG VLQFH WKH YDOYHZLOOQRWUHVWRUH :KHQ \RX XVH D FDSDFLWRU ZLWK SUHVVXUH YDOYH SURYLGH FHUWDLQ VSDFH DERYH WKH SUHVVXUH YDOYH DV EHORZ WR SUHYHQW DQ LQWHUIHUHQFH ZKHQ LW ZRUNV DV DYDOYH 'LDPHWHURIWKHFDSDFLWRU PP WROHVV WR 5HTXLUHGVSDFH DERYHWKHYDOYH PP 'RXEOHVLGHG3&%V :KHQ \RX XVH HOHFWURO\WLF FDSDFLWRUV RQ D GRXEOH VLGHG3&%EHFDUHIXOQRWWRKDYHWKHFLUFXLWSDWWHUQ UXQ XQGHU ZKHUH WKH FDSDFLWRU LV PRXQWHG 2WKHUZLVH LW PD\ FDXVH D VKRUW FLUFXLW RQ WKH 3&% GHSHQGLQJRQWKHFRQGLWLRQRIPRXQWLQJ 5HJDUGLQJWRFRQQHFWLRQRIFDSDFLWRUV $OXPLQXPHOHFWURO\WLFFDSDFLWRUKDVHOHFWURO\WHOLTXLG VR WKDW WKH PRVW SRUWLRQ RI HOHFWULF ORVV FKDUDFWHULVWLFV FDPH IURP (65 (TXLYDOHQW 6HULHV 5HVLVWDQFH RI HOHFWURO\WH OLTXLG 7KHUHIRUH WKH FDSDFLWRULVDQHOHFWURQLFGHYLVHZKLFKFDQIORZKLJK ULSSOHFXUUHQWLQFDVHWKHWHPSHUDWXUHLQFUHDVHVDQG LWGHFUHDVHV(65 ,QFDVHFRQQHFWLQJWZRFDSDFLWRUVRUPRUH(65RI WKHFDSDFLWRUVLVFORVHWRWKHUHVLVWDQFHRIWKHFLUFXLW 7KHUHIRUH LQ FDVH FXUUHQW LV XQEDODQFHG DQG VRPH FDSDFLWRUV KDV KLJK ULSSOH FXUUHQW WHPSHUDWXUH LQFUHDVHLWPDNHVPRUHKLJKFXUUHQWDQGILQDOO\LWLV RYHUWKHUDWHGULSSOHFXUUHQW )RU SDUDOOHO FRQQHFWLRQ RI FDSDFLWRUV WKH SURSHU GHVLJQRIHOHFWULFFLUFXLWVXFKDVEDODQFLQJRIHDFK FDSDFLWRUVUHVLVWDQFHRUFRQWURORIWRWDOULSSOHFXUUHQW VKDOOEHSURYLGHGWRDYRLGH[FHVVULSSOHFXUUHQWDQG YROWDJH :KHQ WZR RU PRUH FDSDFLWRUV DUH DUUDQJHG LQ VHULHV WKH YROWDJH JLYHQ WR HDFK FDSDFLWRUV VKDOO EHNHSWEHORZWKHUDWHGYROWDJHOHYHOE\DOVRJLYLQJ FRQVLGHUDWLRQ WR WKH EDODQFH RI WKH YROWDJH LPSUHVVHG RQ WKH FDSDFLWRUV )XUWKHU SDUWLDO SUHVVXUH UHVLVWRU ZKLFK FRQVLGHUV OHDNDJH FXUUHQW VKDOOEHSURYLGHGSDUDOOHOWRHDFKFRQGHQVHUQRWWR KDYHRYHUYROWDJHLPSUHVVHGRQ %DODQFH UHVLVWDQFH DUH H[SODLQHG RQ S RI RXU &DWDORJ &DXWLRQVIRU0RXQWLQJ &DXWLRQVIRUPRXQWLQJ &KHFN WKH UDWLQJV HOHFWURVWDWLF FDSDFLWDQFH DQG UDWHGYROWDJH RIWKHFDSDFLWRUEHIRUHPRXQWLQJ &KHFN WKH SRODULW\ RI WKH FDSDFLWRU WR WKH FKDVVLV 'R QRW GURS WKH FDSDFLWRU WR WKH IORRU 'R QRW XVH CAT.No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a G ,VRSURS\ODOFRKRO SURSDQRO CAT.No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esign, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use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esign, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use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o.2013/2014E (R) MEMO CAT.No.2013/2014E 48 (R) ALUMINUM ELECTROLYTIC CAPACITORS &KLS7\SH$OXPLQXP(OHFWURO\WLF&DSDFLWRUV Chip Type Aluminum Electrolytic Capacitors NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. 49 CAT.No.2013/2014E RV2 *5((1 &$3 &KLS7\SH6WDQGDUG&DSDFLWRUV KHLJKWPP (R) VERTICAL CHIP TYPE ALUMINUM ELECTROLYTIC CAPACITORS 60' $QWL FOHDQLQJ VROYHQW Compatible with surface mounting for 5.5mm high capacitors. Supplied with carrier taping. Guarantees 2000 hours at 85. Convert to chip RC3 RV2 Marking color : Black print Specifications Item Performance 40 to 85 20 Less than 0.01CV or 3 whichever is larger (after 2 minutes) C : Rated capacitance (F) ; V : Rated voltage (V) Category temperature range () Tolerance at rated capacitance (%) Leakage current (A) Rated voltage (V) Tangent of loss angle (tan) 3 4 to 6.3 tan (max.) Rated voltage(V) -25/20 3 Impedance ratio -40/20 (max.) -25/20 4 to -40/20 6.3 Chip Type Aluminum Electrolytic Capacitors Characteristics at high and low temperature 4 0.42 0.42 6.3 0.30 0.28 10 0.24 0.24 16 0.22 0.20 25 0.16 0.14 35 0.14 0.12 50 0.12 0.10 4 7 17 7 15 6.3 4 10 3 8 10 3 8 3 5 16 2 6 2 4 25 2 4 2 3 35 2 3 2 3 50 2 3 2 3 Tangent of the loss angle Shelf life (85) Test time : 1000hours ; other items are the same as those for the endurance. Voltage application treatment : According to JIS C5101-1 JIS C5101-1 1998, -18 1999 (IEC 60384-1 1992, -18 1993) 0.40.2 Unit : mm 0.3MAX (P) B0.2 C 1.5 2.0 2.3 2.7 RV2 P 0.8 1.0 1.5 2.0 1k 10k100k 1 1 1 1.15 1.25 1.35 1.25 1.40 1.50 V 16 Rated voltage symbol Series code W 0.45 to 0.75 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 120 0.80 0.80 0.80 * 3 (example : 16V10F) (C) D0.5 B 3.3 4.3 5.3 6.6 5060 Part numbering system W A 3.3 4.3 5.3 6.6 L 5.30.2 5.30.2 5.30.2 5.30.2 Frequency (Hz) 4 to 16 25 to 35 50 ( ) : Reference size D 3 4 5 6.3 Coefficient of Frequency for Rated Ripple Current Rated voltage (V) (C) A0.2 L (120Hz) Applicable standards Outline Drawing (20,120Hz) 2000 hours (3 : 1000 hours) The initial specified value or less Within 20% of initial value (4WV : 30%) 200% or less of the initial specified value (4WV : 300%) Test time Leakage current Percentage of capacitance change Endurance (85) (Applied ripple current) (20,120Hz) (20) 100 M B55 U Rated capacitance Capacitance symbol tolerance symbol Casing symbol Taping symbol * 4 to 6.3 (example : 16V47F) Casing symbol B55 RV2 V 16 Rated voltage symbol Series code 470 M U Rated capacitance Capacitance symbol tolerance symbol Taping symbol Additional symbol Should add S , when there is a black point in standard ratings. Soldering conditions are described on page 13. Land pattern size are described on page 11. The taping spesifications are described on page 14. Standard Ratings Rated voltage (V) Rated capacitance (F) 4 Item Case 0.1 D (mm) Casing symbol 6.3 ESR Rated ripple current Case mArmsD (mm) Casing symbol 10 ESR Rated ripple current Case mArmsD (mm) Casing symbol 16 ESR Rated ripple current Case D (mm) mArms Casing symbol 25 ESR Rated ripple current Case mArmsD (mm) Casing symbol 35 ESR Rated ripple current Case mArmsD (mm) Casing symbol 50 ESR Rated ripple current Case mArmsD (mm) B55 1990 1 905 754 603 503 424 353 199 166 75 50 2 5 3 6 4 7 6 10 15 19 35 26 17 44 0.33 0.47 1 2.2 3.3 8 9 11 19 B55 106 B55 70 B55 57 49 3 3 4.7 3 4 4 42 20 5 4 40 23 4 5 5 6.3 21 14 10 5.0 31 44 52 89 5 5 6.3 6.3 18 12 8.5 4.0 39 48 67 98 3 4 5 6.3 6.3 6.3 B55 22 33 47 100 220 3 B55 32 14 21 4 31 15 4 37 5 7.0 63 6.3 3.2 110 Rated ripple current B55 B55 B55 B55 0.22 37 18 33 26 15 44 10 63 7.1 75 3.3 103 ESR mArms 3 3 4 3 4 3 4 3 4 4 4 10 Casing symbol 5 23 32 5 20 34 6.3 6.3 6.3 11 7.0 55 67 6.3 9.1 59 (Note) Rated ripple current : 85, 120Hz ; ESR : 20, 120Hz CAT.No.2013/2014E 50 NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. (R) VERTICAL CHIP TYPE ALUMINUM ELECTROLYTIC CAPACITORS *5((1 &$3 &KLS7\SH/DUJH&DSDFLWDQFH&DSDFLWRUV Compatible with surface mounting. Supplied with carrier taping. Guarantees 2000 hours at 85. 60' RV $QWL FOHDQLQJ VROYHQW /DUJH&DSDFLWDQFH 59 59 Marking color : Black print (8x6.5L) White print on a brown sleeve (8x10L 12.5x13.5L) Specifications ,WHP 3HUIRUPDQFH Category temperature range () 40 to 85 20 Less than 0.01CV or 3 whichever is larger (after 2 minutes) C : Rated capacitance (F) ; V : Rated voltage (V) Tolerance at rated capacitance (%) Leakage current (A) Rated voltage (V) tan (max.) Tangent of loss angle (tan) 6.3 0.28 16 0.20 10 0.24 25 0.14 35 0.12 50 0.10 (20,120Hz) (20) 63 0.10 100 0.10 (20,120Hz) 6.3 4 8 Rated voltage (V) -25/20 -40/20 Characteristics at high and low temperature Impedance ratio (max.) 10 3 5 16 2 4 25 2 3 35 2 3 50 2 3 63 2 3 100 2 3 (120Hz) Shelf life (85) Test time : 1000hours; other items are the same as those for the endurance. Voltage application treatment : According to JIS C5101-1 Applicable standards JIS C 5101-1 1998,-18 1999 (IEC 60384-1 1992, -18 1993) Outline Drawing Coefficient of Frequency for Rated Ripple Current Unit: mm 0.3MAX 8,10 Frequency (Hz) Rated voltage (V) 6.3 to 16 25 to 35 50 to 63 100 3 B0.2 D0.5 & M A0.2 & ( ) : Reference size C 3.4 3.0 3.3 4.9 M 0.40.2 0.40.2 0.40.2 0.70.3 W 0.5 to 0.8 0.7 to 1.1 0.7 to 1.1 1.0 to 1.4 P 2.3 3.1 4.7 4.6 Casing symbol G68 G10 H10 E RV 6.3 Dmm Casing symbol 10 Rated ripple current Case mArms Dmm Casing symbol 120 1k 10k 100k 1 1 1 1.21 1.16 1.06 1.29 1.23 1.11 1.43 1.25 1.11 RV 16 Rated ripple current Case mArms Dmm Casing symbol V 10 102 H10 U M Rated capacitance Capacitance symbol tolerance symbol Casing symbol Taping symbol 12.510V1500F Standard Ratings Item Case 1.25 1.40 1.50 1.50 Rated voltage symbol Series code Rated capacitance (F) 10k100k 1.15 1.25 1.35 1.35 10 10V1000F Soldering conditions are described on page 13. Land pattern size are described on page 11. The taping specifications are described on page 14. Rated voltage (V) 1k 1 1 1 1 Part numbering system Series code 120 0.80 0.80 0.80 0.70 Frequency (Hz) Rated capacitance (F) 100 to 220 330 to 1000 1500 to 2200 : D L A B 6.50.3 8.4 8.4 8 100.5 8 8.4 8.4 100.5 10.4 10.4 10 12.5 13.50.5 13.0 13.0 5060 12.5 / Chip Type Aluminum Electrolytic Capacitors 2000 hours The initial specified value or less Within 20% of initial value 200% or less of the initial specified value Test time Leakage current Percentage of capacitance change Tangent of the loss angle Endurance (85) (Applied ripple current) 25 Rated ripple current Case mArms Dmm Casing symbol V 10 Rated voltage symbol 35 Rated ripple current Case mArms Dmm Casing symbol 152 M 50 Rated ripple current Case mArms Dmm Casing symbol T E Rated capacitance Capacitance symbol tolerance symbol Casing symbol 63 Rated ripple current Case mArms Dmm Casing symbol R5 Taping symbol 100 Rated ripple current Case mArms Dmm Casing symbol Rated ripple current mArms 10 8x10 G10 94 22 8x6.5 G68 155 8x10 G10 139 10x10 H10 189 33 47 68 100 8x6.5 G68 155 8x6.5 G68 155 8x6.5 G68 155 8x6.5 G68 155 8x10 G10 139 10x10 H10 189 G68 155 8x6.5 G68 155 8x10 G10 252 10x10 H10 226 10x10 H10 226 8x6.5 G68 155 8x10 G10 252 10x10 H10 458 10x10 H10 226 12.5x13.5 E 242 8x6.5 220 8x6.5 G68 155 8x6.5 G68 155 8x10 G10 252 8x10 G10 252 10x10 H10 458 12.5x13.5 E 343 330 8x6.5 G68 155 8x10 G10 252 8x10 G10 252 10x10 H10 458 12.5x13.5 E 451 8x10 G10 252 470 8x10 G10 252 10x10 H10 458 10x10 H10 458 10x10 H10 458 12.5x13.5 E 460 820 12.5x13.5 E 552 1000 10x10 H10 458 10x10 H10 458 12.5x13.5 E 521 1500 12.5x13.5 E 580 2200 12.5x13.5 E 651 (Note) Rated ripple current : 85, 120Hz NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. 51 CAT.No.2013/2014E RV3 &KLS7\SH&&DSDFLWRUV KHLJKWPPPP (R) VERTICAL CHIP TYPE ALUMINUM ELECTROLYTIC CAPACITORS *5((1 &$3 $QWL FOHDQLQJ VROYHQW 60' Compatible with surface mounting for 5.5mm, 8.0mm high capacitors. Supplied with carrier taping. Guarantees 2000 hours at 85. High CV RV3 RV2 Marking color : Black print Specifications Item Performance Category temperature range () 40 to 85 20 Less than 0.01CV or 3 whichever is larger (after 2 minutes) C : Rated capacitance (F) ; V : Rated voltage (V) Tolerance at rated capacitance (%) Leakage current (A) 6.3 0.42 Rated voltage (V) tan (max.) Tangent of loss angle (tan) 10 0.32 16 0.26 25 0.18 (20,120Hz) (20) 35 0.14 50 0.12 (20,120Hz) Rated voltage (V) 25/20 40/20 Chip Type Aluminum Electrolytic Capacitors Characteristics at high and low temperature Impedance ratio (max.) 6.3 4 8 10 3 8 16 2 5 25 2 5 35 2 4 50 2 4 (120Hz) Test time Leakage current Percentage of capacitance change Tangent of the loss angle Endurance (85) (Applied ripple current) 2000 hours The initial specified value or less Within 30% of initial value 300% or less of the initial specified value Shelf life (85) Test time : 1000 hours ; other items are the same as those for the endurance. Voltage application treatment : According to JIS C5101-1 Applicable standards JIS C5101-1 1998, -18 1999 (IEC 60384-1 1992, -18 1993) Outline Drawing Uni t: mm Frequency (Hz) Rated voltage (V) 6.3 to 16 25 to 35 50 RV3 ( ) : Reference size L 5.30.2 5.30.2 5.30.2 7.70.2 A 4.3 5.3 6.6 6.6 B 4.3 5.3 6.6 6.6 C 2.0 2.3 2.7 2.7 120 1k 10k100k 0.80 0.80 0.70 1 1 1 1.15 1.25 1.35 1.25 1.40 1.50 Part numbering system (example : 16V220F) W L D 4 5 6.3 6.3 50 (P) (C) D0.5 B0.2 (C) A0.2 0.40.2 0.3MAX Coefficient of Frequency for Rated Ripple Current 0.5 0.5 0.5 0.5 W to to to to 0.8 0.8 0.8 0.8 P 1.0 1.5 2.0 2.5 Series code 16 Rated voltage symbol V 221 M Rated capacitance Capacitance symbol tolerance symbol F80 U Casing symbol Taping symbol Casing symbol D55 E55 F55 F80 Soldering conditions are described on page 13. Land pattern size are described on page 11. The taping specifications are described on page 14. Standard Ratings Rated voltage (V) Rated capacitance (F) 4.7 10 22 33 47 68 100 150 220 330 Item 6.3 10 16 25 35 50 ripple ripple ripple ripple ripple ripple Case Case Case Case Case Case ESR Rated ESR Rated ESR Rated ESR Rated ESR Rated ESR Rated current current current current current current D (mm) mArmsD (mm) mArmsD (mm) mArmsD (mm) mArmsD (mm) mArmsD (mm) mArms 4x5.3 42 20 4x5.3 30 23 4x5.3 23 27 5x5.3 20 34 24 26 20 30 4x5.3 5x5.3 14 43 4x5.3 5x5.3 11 47 6.3x5.3 9.0 59 4x5.3 21 28 4x5.3 16 33 5x5.3 13 44 5x5.3 9.0 54 6.3x5.3 7.0 67 6.3x7.7 6.0 82 6.4 75 6.3x7.7 4.9 90 6.3x7.7 4.2 98 4x5.3 15 34 5x5.3 11 45 5x5.3 9.2 50 6.3x5.3 5x5.3 47 5x5.3 7.8 54 6.3x5.3 6.3 74 6.3x5.3 4.4 90 6.3x7.7 3.4 109 10 5x5.3 7.0 58 6.3x5.3 4.3 103 6.3x7.7 3.0 124 6.3x5.3 4.6 83 6.3x7.7 3.5 98 6.3x7.7 2.9 109 6.3x7.7 3.2 113 6.3x7.7 2.4 130 6.3x7.7 2.0 144 6.3x7.7 2.1 139 (Note) Rated ripple current : 85, 120Hz ; ESR : 20, 120Hz CAT.No.2013/2014E 52 NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. RV4 (R) VERTICAL CHIP TYPE ALUMINUM ELECTROLYTIC CAPACITORS *5((1 &$3 &KLS7\SH&&DSDFLWRUV KHLJKWPP $QWL FOHDQLQJ VROYHQW 60' Compatible with surface mounting for 4.5mm high capacitors. Supplied with carrier taping. Guarantees 2000 hours at 85. 59 /RZ3URILOH 59 Marking color : Black print Specifications Item Performance Category temperature range () 40 to 85 20 Less than 0.01CV or 3 whichever is larger (after 2 minutes) C : Rated capacitance (F) ; V : Rated voltage (V) Tolerance at rated capacitance (%) Leakage current (A) Rated voltage (V) tan (max.) Tangent of loss angle (tan) 6.3 0.30 10 0.24 16 0.19 25 0.16 (20 C,120Hz) (20 C) 35 0.14 50 0.12 (20 C,120Hz) 6.3 4 8 Impedance ratio (max.) 10 3 8 16 2 4 25 2 4 35 2 3 50 2 3 (120Hz) Test time Leakage current Percentage of capacitance change Tangent of the loss angle Endurance (85) (Applied ripple current) 2000 hours The initial specified value or less Within 20% of initial value 300% or less of the initial specified value Shelf life (85) Test time : 1000 hours ; other items are the same as those for the endurance. Voltage application treatment : According to JIS C5101-1 Applicable standards JIS C5101-1 1998, -18 1999 (IEC 60384-1 1992, -18 1993) Outline Drawing Unit : mm Frequency (Hz) Rated voltage (V) 6.3 to 16 25 to 35 0.1 to 3.3F 50 4.7 to 10F (C) (P) B0.2 D0.5 (C) A0.2 0.40.2 0.3MAX RV4 ( ) : Reference size D 4 5 6.3 L 4.5 0.1 -0.2 4.5 0.1 -0.2 4.5 0.1 -0.2 A B C W P Casing symbol 4.3 4.3 2.0 0.5 to 0.8 1.0 D46 5.3 5.3 2.3 0.5 to 0.8 1.5 E46 6.6 6.6 2.7 0.5 to 0.8 2.0 F46 5060 120 1k 10k100k 0.80 0.70 0.50 0.70 1 1 1 1 1.15 1.25 1.35 1.35 1.25 1.40 1.50 1.50 Part numbering system (example : 6.3V47F) W L Coefficient of Frequency for Rated Ripple Current Series code 6 Rated voltage symbol V 470 M Rated capacitance Capacitance symbol tolerance symbol E46 U Casing symbol Taping symbol Soldering conditions are described on page 13. Land pattern size are described on page 11. The taping specifications are described on page 14. Standard Ratings Rated voltage (V) Rated capacitance ( F) 0.22 0.33 0.47 1 2.2 3.3 4.7 10 22 33 47 100 Item 6.3 10 16 25 35 50 Rated ripple Rated ripple Rated ripple Rated ripple Rated ripple Rated ripple Case ESR Case ESR Case ESR Case ESR Case ESR Case ESR current current current current current current D(mm) mArmsD(mm) mArmsD(mm) mArmsD(mm) mArmsD(mm) mArmsD(mm) mArms 4 905 4 4 603 5 4 423 6 4 199 8 4 90 12 4 60 15 4 49 18 4 56 17 5 42 21 5 23 30 4 32 22 5 27 28 6.3 20 35 5 18 34 4 23 26 6.3 11 52 5 14 38 6.3 12 49 5 12 42 5 15 37 6.3 10 55 6.3 8 60 6.3 8 59 5 11 45 6.3 7 76 6.3 5 76 (Note) Rated ripple current : 85, 120Hz ; ESR : 20, 120Hz NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. 53 CAT.No.2013/2014E Chip Type Aluminum Electrolytic Capacitors Rated voltage (V) 25/20 40/20 Characteristics at high and low temperature RV5 *5((1 &$3 &KLS7\SH/DUJH&DSDFLWDQFH&DSDFLWRUV (R) VERTICAL CHIP TYPE ALUMINUM ELECTROLYTIC CAPACITORS $QWL FOHDQLQJ VROYHQW 60' Compatible with surface mounting. Supplied with carrier taping. Guarantees 2000 hours at 85 C. +LJK&9 59 59 Marking color : Black print (3x5.3L-8x10L) White print on a brown sleeve (10x10L) Specifications Performance 40 to 85 20 Less than 0.01CV or 3 whichever is larger (after 2 minutes) C : Rated capacitance (F) ; V : Rated voltage (V) Item Category temperature range () Tolerance at rated capacitance (%) Leakage current (A) Rated voltage (V) tan (max.) Tangent of loss angle (tan) 6.3 0.35 10 0.32 16 0.28 25 0.18 35 0.14 50 0.12 (20,120Hz) (20) 63 0.12 100 0.12 (20,120Hz) Rated voltage (V) -25/20 Impedance ratio (max.) -40/20 Chip Type Aluminum Electrolytic Capacitors Characteristics at high and low temperature 6.3 4 10 10 3 8 16 2 6 25 2 4 35 2 3 50 2 3 63 2 3 100 2 3 (120Hz) Test time Leakage current Percentage of capacitance change Tangent of the loss angle Endurance (85) (Applied ripple current) 2000 hours (3 : 1000 hours) The initial specified value or less Within 30% of initial value 200% or less of the initial specified value Shelf life (85) Test time : 1000 hours; other items are the same as those for the endurance. Voltage application treatment : According to JIS C5101-1 Applicable standards JIS C5101-1 1998, -18 1999 (IEC 60384-1 1992, -18 1993) Outline Drawing Unit : mm Frequency (Hz) Rated voltage (V) 6.3 to 16 25 to 35 50 to 63 100 (C) (P) B0.2 D0.5 (C) A0.2 0.40.2 0.3MAX Coefficient of Frequency for Rated Ripple Current RV5 ( ) : Reference size D 3 4 5 6.3 6.3 8 8 10 L 5.30.2 5.30.2 5.30.2 5.30.2 7.70.3 6.50.3 100.5 100.5 A 3.3 4.3 5.3 6.3 6.6 8.4 8.4 10.4 B 3.3 4.3 5.3 6.3 6.6 8.4 8.4 10.4 C 1.5 2.0 2.3 2.7 2.7 3.4 3.0 3.3 W 0.45 to 0.75 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.7 to 1.1 0.7 to 1.1 P 0.8 1.0 1.5 2.0 2.0 2.3 3.1 4.7 Casing symbol B55 D55 E55 F55 F80 G68 G10 H10 120 1k 10k100k 0.80 0.80 0.80 0.70 1 1 1 1 1.15 1.25 1.35 1.35 1.25 1.40 1.50 1.50 Part numbering system (example : 16V470F) W L 5060 Series code 16 Rated voltage symbol V 471 M Rated capacitance Capacitance symbol tolerance symbol G10 U Casing symbol Taping symbol Soldering conditions are described on page 13. Land pattern size are described on page 11. The taping spesifications are described on page 14. CAT.No.2013/2014E 54 NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. (R) RV5 VERTICAL CHIP TYPE ALUMINUM ELECTROLYTIC CAPACITORS Standard Ratings Rated voltage (V) 6.3 Item Case Casing Rated capacitance (F) 16 10 Rated ripple current Case Casing Rated ripple current Case Casing 25 Rated ripple current Case Casing 35 Rated ripple current Case Casing 50 Rated ripple current Rated ripple current B55 7 3x5.3 B55 10 4x5.3 D55 12 13 4x5.3 D55 18 5x5.3 E55 20 D55 24 5x5.3 E55 30 6.3x5.3 F55 32 6.3x7.7 F80 60 E55 41 6.3x5.3 F55 47 8x6.5 G68 62 8x10 G10 94 3.3 4.7 3x5.3 B55 B55 18 3x5.3 B55 16 4x5.3 B55 20 4x5.3 D55 24 5x5.3 100 Case Casing 3x5.3 47 100 Rated ripple current 33 Case Casing 22 63 Rated ripple current D(mm) symbol (mArms) D(mm) symbol (mArms) D(mm) symbol (mArms) D(mm) symbol (mArms) D(mm) symbol (mArms) D(mm) symbol (mArms) D(mm) symbol (mArms) D(mm) symbol (mArms) 2.2 10 Case Casing 3x5.3 B55 21 3x5.3 3x5.3 4x5.3 D55 32 4x5.3 D55 34 4x5.3 D55 33 5x5.3 E55 52 5x5.3 55 5x5.3 54 6.3x5.3 F55 70 E55 220 6.3x5.3 F55 6.3x7.7 6.3x5.3 F55 79 6.3x7.7 F80 173 8x6.5 G68 175 88 F80 188 8x6.5 G68 190 330 G10 310 E55 47 6.3x7.7 F80 120 8x6.5 G68 118 6.3x5.3 F55 54 6.3x7.7 F80 85 8x10 G10 139 10x10 H10 189 6.3x7.7 F80 120 8x10 G10 252 10x10 H10 226 8x6.5 G68 83 8x10 G10 260 300 10x10 H10 360 H10 400 6.3x7.7 F80 162 8x10 G10 8x10 G10 307 10x10 470 680 10x10 H10 380 G10 320 820 8x10 8x10 1000 10x10 H10 454 1500 10x10 H10 489 (Note) Rated ripple current : 85, 120Hz NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. 55 CAT.No.2013/2014E Chip Type Aluminum Electrolytic Capacitors 150 E55 5x5.3 RVB *5((1 &$3 &KLS7\SH%LSRODU&DSDFLWRUV KHLJKWPP (R) VERTICAL CHIP TYPE ALUMINUM ELECTROLYTIC CAPACITORS 60' $QWL FOHDQLQJ VROYHQW Compatible with surface mounting for 5.5mm high capacitors. Supplied with carrier taping. Guarantees 2000 hours at 85. %LSRODU 59% 59 Marking color : Black print Specifications Performance 40 to 85 20 Less than 0.01CV or 3 whichever is larger (after 2 minutes) C : Rated capacitance (F) ; V : Rated voltage (V) Item Category temperature range () Tolerance at rated capacitance (%) Leakage current (A) Rated voltage (V) Tangent of loss angle (tan) 6.3 0.35 0.30 4 5, 6.3 tan (max.) 10 0.30 0.25 16 0.25 0.20 25 0.25 0.15 (20,120Hz) (20) 35 0.25 0.15 50 0.25 0.15 (20,120Hz) Rated voltage (V) -25/20 -40/20 Chip Type Aluminum Electrolytic Capacitors Characteristics at high and low temperature 6.3 3 8 Impedance ratio (max.) 10 3 5 16 2 4 25 2 3 35 2 3 50 2 3 (120Hz) 2000 hours (with the polarity inverted every 250 hours) The initial specified value or less Within 20% of initial value 200% or less of the initial specified value Test time Leakage current Percentage of capacitance change Tangent of the loss angle Endurance (85) (Applied ripple current) Test time : 1000hours; other items are the same as those for the endurance. Voltage application treatment : According to JIS C5101-1 Shelf life (85) JIS C5101-1 1998, -18 1999 (IEC 60384-1 1992, -18 1993) Applicable standards Outline Drawing 0.3 MAX Coefficient of Frequency for Rated Ripple Current Frequency (Hz) Rated voltage (V) 50 120 1k 10k100k 6.3 to 16 25 to 35 50 0.80 0.80 0.80 1 1 1 1.15 1.25 1.35 1.25 1.40 1.50 (P) B0.2 D0.5 (C) A0.2 0.40.2 Unit : mm (C) 3DUWQXPEHULQJV\VWHP H[DPSOH9) 59% W / ( ) : Reference size D 4 5 6.3 L 5.30.2 5.30.2 5.30.2 A 4.3 5.3 6.6 B 4.3 5.3 6.6 C 2.0 2.3 2.7 W 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 6HULHVFRGH Rated voltage symbol 9 8 0 Rated capacitance symbol Capacitance tolerance symbol Taping symbol P 1.0 1.5 2.0 Soldering conditions are described on page 13. Land pattern size are described on page 11. The taping specifications are described on page 14. Standard Ratings Rated voltage (V) Rated capacitance (F) Item Case D(mm) 6.3 ESR () Rated ripple current Case (mArms) D(mm) 4 6.3 27 45 6.3 54 10 ESR () 0.22 0.33 0.47 1 2.2 3.3 4.7 50 10 5 23 19 22 6.3 15 13 33 6.3 11 47 (Note) Rated ripple current : 85 C, 120Hz ; ESR : 20 C, 120Hz CAT.No.2013/2014E Rated ripple current Case (mArms) D(mm) 4 18 5 40 6.3 50 6.3 16 ESR () 88 33 15 10 Rated ripple current Case (mArms) D(mm) 4 14 5 26 6.3 45 55 56 25 ESR () 101 53 25 Rated ripple current Case (mArms) D(mm) 4 13 5 20 5 35 6.3 35 ESR () 151 75 53 25 Rated ripple current Case (mArms) D(mm) 4 4 4 4 5 10 5 17 6.3 21 35 50 ESR () 1510 1010 706 332 113 75 53 Rated ripple current (mArms) 3.3 4.1 4.9 7.2 14 17 24 NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. (R) VERTICAL CHIP TYPE ALUMINUM ELECTROLYTIC CAPACITORS *5((1 &$3 &KLSW\SH&&DSDFLWRUV KHLJKWPP 60' RVE $QWL FOHDQLQJ VROYHQW Compatible with surface mounting. Supplied with carrier taping. Guarantees 1000 hours 105. High temperature RVE RV4 Marking color : Black print Specifications Performance 40 to 105 20 Less than 0.01CV or 3 whichever is larger (after 2 minutes) C : Rated capacitance (F), V : Rated voltage (V) Item Category temperature range () Tolerance at rated capacitance (%) Leakage current (A) Rated voltage (V) tan (max.) Tangent of loss angle (tan) 6.3 0.38 10 0.32 16 0.20 25 0.16 (20,120Hz) (20) 35 0.14 50 0.14 (20,120Hz) Rated voltage (V) Characteristics at high 10 3 8 16 2 6 25 2 4 35 2 3 50 2 3 (120Hz) 1000 hours The initial specified value or less Within 20% of initial value (16WV or less :25%) 300% or less of the initial specified value Test time Leakage current Percentage of capacitance change Tangent of loss angle Endurance (105) Shelf life (105) Test time : 500 hours ; other items are the same as those for the endurance. Voltage application treatment Applicable standards JIS C5101-1 1998, -18 1999 (IEC 60384-1 1992, -18 1993) Outline Drawing Coefficient of Frequency for Rated Ripple Current Unit : mm Frequency (Hz) Rated voltage (V) 6.3 to 16 25 to 35 0.1 to 3.3F 50 4.7F to (C) A 4.3 5.3 6.6 B 4.3 5.3 6.6 C 2.0 2.3 2.7 W 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 P 1.0 1.5 2.0 RVE ( ) : Reference size L 4.50.1 4.50.1 4.50.1 120 1k 10k100k 0.80 0.80 0.50 0.70 1.00 1.00 1.00 1.00 1.15 1.25 1.35 1.35 1.25 1.40 1.50 1.50 Part numbering system (example : 16V10F) W L D 4 5 6.3 5060 (P) B0.2 D0.5 (C) A0.2 0.40.2 0.3MAX Series code Casing symbol D46 E46 F46 16 V Rated voltage symbol 100 M Rated capacitance Capacitance symbol tolerance symbol D46 U Casing symbol Taping symbol Soldering conditions are described on page 13. Land pattern size are described on page 11. The taping specifications are described on page 14. Standard Ratings 6.3 Rated voltage (V) Rated capacitance (F) 0.22 0.33 0.47 1 2.2 3.3 4.7 10 22 33 47 100 Item 10 16 25 35 50 Case Rated ripple current Case Rated ripple current Case Rated ripple current Case Rated ripple current Case Rated ripple current Case Rated ripple current D(mm) (mArms) 19 26 32 52 D(mm) (mArms) 24 30 40 D(mm) (mArms) 16 26 35 44 D(mm) (mArms) 11 20 33 42 D(mm) (mArms) 13 22 36 D(mm) (mArms) 2.2 2.8 3.3 5.4 9.6 12 16 26 4 5 5 6.3 5 5 6.3 4 5 6.3 6.3 4 5 6.3 6.3 4 5 6.3 4 4 4 4 4 4 5 6.3 (Note) Rated ripple current : 105 C, 120Hz NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. 57 CAT.No.2013/2014E Chip Type Aluminum Electrolytic Capacitors and low temperature 6.3 4 10 25/20 40/20 Impedance ratio (max.) RVS *5((1 &$3 &KLS7\SH&6WDQGDUG&DSDFLWRUV (R) VERTICAL CHIP TYPE ALUMINUM ELECTROLYTIC CAPACITORS Compatible with surface mounting. Supplied with carrier taping. Guarantees 1000 hours at 105 C. 60' Y& KRXUV $QWL FOHDQLQJ VROYHQW 596 +LJKWHPSHUDWXUH 59 Marking color : Black print Specifications Item Performance 55 to 105 20 Less than 0.01CV or 3 whichever is larger (after 2 minutes) C : Rated capacitance (F) ; V : Rated voltage (V) Category temperature range () Tolerance at rated capacitance (%) Leakage current (A) Rated voltage (V) tan (max.) Tangent of loss angle (tan) 6.3 0.30 10 0.26 16 0.22 25 0.16 (20,120Hz) (20) 35 0.13 50 0.12 (20,120Hz) Rated voltage (V) 25/20 40/20 Chip Type Aluminum Electrolytic Capacitors Characteristics at high and low temperature Impedance ratio (max.) 6.3 4 8 10 3 5 16 2 4 25 2 3 35 2 3 50 2 3 (120Hz) 1000 hours The initial specified value or less Within 20% of initial value 200% or less of the initial specified value Test time Leakage current Percentage of capacitance change Tangent of the loss angle Endurance (105) (Applied ripple current) Shelf life (105) Test time : 1000 hours; other items are the same as those for the endurance. Voltage application treatment : According to JIS C5101-1 Applicable standards JIS C5101-1 1998, -18 1999 (IEC 60384-1 1992, -18 1993) Outline Drawing Unit : mm Frequency (Hz) Rated voltage (V) D0.5 (C) 4 6.3 6.3 8 8 10 10 A B C 5.30.2 5.30.2 5.30.2 7.70.3 6.50.3 100.5 100.5 10.50.5 4.3 5.3 6.6 6.6 8.4 8.4 10.4 10.4 4.3 5.3 6.6 6.6 8.4 8.4 10.4 10.4 2.0 2.3 2.7 2.7 3.4 3.0 3.3 3.3 120 1k 10k100k 0.80 0.80 0.80 1 1 1 1.15 1.25 1.35 1.25 1.40 1.50 (P) B0.2 RVS Reference size L 5060 Part numbering system (example : 16V47F) W L D 6.3 to 16 25 to 35 50 (C) A0.2 0.40.2 0.3MAX Coefficient of Frequency for Rated Ripple Current W 0.5 0.5 0.5 0.5 0.5 0.7 0.7 0.7 to to to to to to to to 0.8 0.8 0.8 0.8 0.8 1.1 1.1 1.1 P Casing symbol 1.0 1.5 2.0 2.0 2.3 3.1 4.7 4.7 D55 E55 F55 F80 G68 G10 H10 HA5 Series code 16 Rated voltage symbol V 470 M Rated capacitance Capacitance symbol tolerance symbol F55 Casing symbol U Taping symbol Soldering conditions are described on page 13. Land pattern size are described on page 11. The taping specifications are described on page 14. CAT.No.2013/2014E 58 NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. (R) VERTICAL CHIP TYPE ALUMINUM ELECTROLYTIC CAPACITORS RVS Standard Ratings Rated voltage (V) Item Rated capacitance (F) 6.3 Case ESR 10 Rated ripple current Case () 16 Rated ripple current Case (mArms) DxL(mm) ESR () 25 Rated ripple current Case Case Case Rated ripple current () (mArms) 4x5.3 905 3 0.33 4x5.3 603 4 0.47 4x5.3 424 5 1 4x5.3 199 7 2.2 4x5.3 91 10 3.3 4x5.3 60 12 4.7 4x5.3 57 12 4x5.3 46 14 5x5.3 42 17 4x5.3 43 15 16 5x5.3 27 21 5x5.3 22 23 6.3x5.3 20 26 12 36 6.3x5.3 10 50 22 4x5.3 23 21 5x5.3 20 25 5x5.3 17 28 6.3x5.3 33 5x5.3 15 30 5x5.3 13 31 6.3x5.3 11 40 6.3x5.3 8.0 44 47 5x5.3 11 36 6.3x5.3 9.2 43 6.3x5.3 7.8 47 8x6.5 5.6 66 100 6.3x5.3 61 6.3x5.3 4.3 60 6.3x5.3 3.6 60 6.3x7.7 2.7 91 6.3x7.7 150 5.0 8x6.5 (mArms) DxL(mm) ESR () 50 Rated ripple current () 36 (mArms) DxL(mm) ESR () 35 Rated ripple current DxL(mm) 4x5.3 (mArms) DxL(mm) ESR 0.22 10 (mArms) DxL(mm) ESR 8x6.5 9.0 51 6.5 59 6.3x7.7 6.0 60 6.3x7.7 4.2 63 2.2 84 8x10 2.0 140 180 6.3x7.7 2.4 105 8x10 1.8 140 8x10 1.4 155 10x10 1.3 8x6.5 2.3 102 6.3x7.7 2.0 105 6.3x7.7 1.7 105 8x10 1.2 155 8x10 0.98 190 10x10.5 0.91 220 330 6.3x7.7 1.5 105 8x10 1.3 195 8x10 1.1 195 8x10 0.80 190 10x10.5 0.65 300 470 8x10 1.1 210 8x10 0.92 210 8x10 0.78 230 10x10 0.57 300 0.54 680 8x10 0.73 210 10x10 0.63 310 10x10 310 1000 8x10 0.50 210 10x10 0.43 310 1500 10x10 0.33 310 (Note) Rated ripple current : 105 , 120Hz ; ESR : 20 , 120Hz NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. 59 CAT.No.2013/2014E Chip Type Aluminum Electrolytic Capacitors 220 RVL *5((1 &$3 &KLS7\SH&&DSDFLWRUV KHLJKWPP (R) VERTICAL CHIP TYPE ALUMINUM ELECTROLYTIC CAPACITORS Y& 60' KRXUV $QWL FOHDQLQJ VROYHQW Compatible with surface mounting for 6.0mm high capacitors. Supplied with carrier taping. Guarantees 2000 hours at 105 C. /RQJOLIH 59/ 596 Marking color : Black print Specifications Item Performance 55 to 105 20 Less than 0.01CV or 3 whichever is larger (after 2 minutes) C : Rated capacitance (F) ; V : Rated voltage (V) Category temperature range () Tolerance at rated capacitance (%) Leakage current (A) Rated voltage (V) tan (max.) Tangent of loss angle (tan) (20,120Hz) (20) 6.3 0.32 10 0.28 16 0.24 25 0.18 35 0.15 50 0.14 6.3 4 8 10 3 5 16 2 4 25 2 3 35 2 3 50 2 3 (20,120Hz) Rated voltage (V) 25/20 Impedance ratio (max.) 40/20 Chip Type Aluminum Electrolytic Capacitors Characteristics at high and low temperature (120Hz) 2000 hours The initial specified value or less Within 30% of initial value 300% or less of the initial specified value Test time Leakage current Percentage of capacitance change Tangent of the loss angle Endurance (105) (Applied ripple current) Shelf life (105) Test time : 1000hours ; other items are the same as those for the endurance. Voltage application treatment : According to JIS C5101-1 Applicable standards JIS C5101-1 1998, -18 1999 (IEC 60384-1 1992, -18 1993) Outline Drawing 0.3MAX Coefficient of Frequency for Rated Ripple Current Frequency (Hz) Rated voltage (V) 6.3 to 16 2535 0.1 to 3.3F 50 4.7 to 10F RVL (C) ( ) : Reference size Series code L 5.70.3 5.70.3 5.70.3 5 6.3 120 1k 10k100k 0.8 0.8 0.5 0.7 1 1 1 1 1.15 1.25 1.35 1.35 1.25 1.40 1.50 1.50 Part numbering system (example : 16V47F) W L D 4 5060 (P) B0.2 D0.5 (C) A0.2 0.40.2 Unit : mm A 4.3 B 4.3 C 2.0 W 0.5 to 0.8 P 1.0 Casing symbol D60 5.3 6.6 5.3 6.6 2.3 2.7 0.5 to 0.8 0.5 to 0.8 1.5 2.0 E60 F60 16 Rated voltage symbol V M 470 Capacitance Rated capacitance tolerance symbol symbol F60 U Casing symbol Taping symbol Soldering conditions are described on page 13. Land pattern size are described on page 11. The taping specifications are described on page 14. Standard Ratings Case D(mm) . 6.3 ESR () 6.3 5.3 Rated voltage (V) Item Rated capacitance (F) 0.22 0.33 0.47 1 2.2 3.3 4.7 10 22 33 47 100 Rated ripple current Case (mArms) D(mm) 6.3 99 10 ESR () 9.9 Rated ripple current Case (mArms) D(mm) 4 5 6.3 74 6.3 16 ripple Case ESR Rated current () (mArms) D(mm) 4 40 27 5 18 46 6.3 12 66 6.3 8.5 78 25 ripple Case ESR Rated current () (mArms) D(mm) 63 21 4 30 36 5 14 62 6.3 9.0 76 35 ESR () 53 25 11 Rated ripple current Case (mArms) D(mm) 4 4 4 4 4 4 5 23 6.3 39 65 50 ESR () 1055 703 494 232 105 70 49 23 Rated ripple current (mArms) 5 6 7 12 19 22 29 47 (Note) Rated ripple current : 105, 120Hz ; ESR : 20, 120Hz CAT.No.2013/2014E 60 NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. (R) *5((1 &$3 &KLS7\SHY&8VH/DUJH&DSDFLWDQFH&DSDFLWRUV RVJ VERTICAL CHIP TYPE ALUMINUM ELECTROLYTIC CAPACITORS Compatible with surface mounting. Supplied with carrier taping. Guarantees 2000 hours at 105. (12.5x13.55000 hours at 105) Y& 60' KRXUV $QWL FOHDQLQJ VROYHQW RVJ High temperature RV Marking color : Black print (8x6.5L) White print on a brown sleeve (8x10L 12.5x13.5L) Specifications Performance -55 to 105 20 Less than 0.01CV or 3 whichever is larger (after 2 minutes) C : Rated capacitance (F) ; V : Rated voltage (V) Item Category temperature range () Tolerance at rated capacitance (%) Leakage current (A) Rated voltage (V) tan (max.) Tangent of loss angle (tan) 6.3 0.30 10 0.24 16 0.22 25 0.16 35 0.13 50 0.12 (20,120Hz) (20) 63 0.11 100 0.10 (20,120Hz) 6.3 4 8 Impedance ratio (max.) 10 3 5 16 2 4 25 2 3 35 2 3 50 2 3 63 2 3 100 2 3 (120Hz) 2000 hours (12.5x13.55000 hours) The initial specified value or less Within 20% of initial value 200% or less of the initial specified value Test time Leakage current Percentage of capacitance change Tangent of the loss angle Endurance (105) (Applied ripple current) Shelf life (105) Test time : 1000 hours ; other items are the same as those for the endurance. Voltage application treatment : According to JIS C5101-1 Applicable standards JIS C 5101-1 1998, -18 1999 (IEC 60384-1 1992, -18 1993) Outline Drawing Coefficient of Frequency for Rated Ripple Current Unit : mm 8,10 Frequency (Hz) 0.3MAX 50 60 120 1k 10k 100k 6.3 to 16 25 to 35 50 to 63 100 0.80 0.80 0.80 0.70 1 1 1 1 1.15 1.25 1.35 1.35 1.25 1.40 1.50 1.50 Frequency (Hz) Rated capacitance() 120 1k 10k 100k 47 100 to 220 330 to 1000 0.50 0.70 0.80 0.76 0.85 0.93 0.87 0.90 0.98 1 1 1 Rated voltage (V) (P) B0.2 D0.5 (C) M A0.2 (C) 12.5 W L ( ) : Reference size L D B A 8.4 8 6.50.3 8.4 100.5 8.4 8 8.4 100.5 10.4 10.4 10 12.5 13.50.5 13.0 13.0 C 3.4 3.0 3.3 4.9 M 0.40.2 0.40.2 0.40.2 0.70.3 P 2.3 3.1 4.7 1.0 to 1.4 4.6 W 0.5 to 0.8 0.7 to 1.1 0.7 to 1.1 Casing symbol G68 G10 H10 E Part numbering system 8,10 16V470 RVJ Soldering conditions are described on page 13. Land pattern size are described on page 11. The taping specifications are described on page 14. Series code 6.3 Rated capacitance (F) Dmm Casing symbol 10 Rated ripple current Case mArms Dmm Casing symbol 16 Rated ripple current Case mArms Dmm Casing symbol 25 Rated ripple current Case mArms Dmm Casing symbol 35 Rated ripple current Case mArms Dmm Casing symbol 22 33 8x6.5 G68 110 8x6.5 G68 110 8x10 G10 178 10x10 H10 324 100 8x6.5 G68 8x6.5 G68 110 8x10 G10 178 8x6.5 8x10 110 G68 G10 110 178 Case mArms Dmm Taping symbol Casing symbol Casing symbol Case mArms Dmm 8x6.5 G68 110 8x10 G10 8x10 G10 8x10 G10 178 10x10 H10 324 Casing symbol R5 Taping symbol Casing symbol 63 Rated ripple current E M 102 Rated capacitance Capacitance symbol tolerance symbol 50 Rated ripple current 10 47 V 10 Rated voltage symbol Standard Ratings Item Case H10 U M 471 Rated capacitance Capacitance symbol tolerance symbol 12.5 10V1000 RVJ Rated voltage (V) V 16 Rated voltage symbol Series code 100 Rated ripple current Case mArms Dmm Casing symbol Rated ripple current mArms 8x10 G10 67 8x10 G10 99 10x10 H10 133 178 10x10 H10 160 10x10 H10 133 178 10x10 H10 160 12.5x13.5 E 475 12.5x13.5 E 577 220 8x10 G10 178 8x10 G10 178 10x10 H10 324 10x10 H10 324 10x10 H10 324 12.5x13.5 E 655 330 8x10 G10 178 10x10 H10 324 10x10 H10 324 10x10 H10 324 12.5x13.5 E 747 470 10x10 H10 324 10x10 H10 324 10x10 H10 324 12.5x13.5 E 747 12.5x13.5 E 747 10x10 H10 324 10x10 H10 324 12.5x13.5 E 747 12.5x13.5 E 747 12.5x13.5 1000 E 747 NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. 61 (Note) Rated ripple current : 105, 120Hz (Note) Rated ripple current : 105, 100kHz CAT.No.2013/2014E Chip Type Aluminum Electrolytic Capacitors Rated voltage (V) -25/20 -40/20 Characteristics at high and low temperature RVR Chip type, 105C Use, Long Life,High CV Capacitors (R) VERTICAL CHIP TYPE ALUMINUM ELECTROLYTIC CAPACITORS GREEN CAP 105C SMD 2000hours Anticleaning solvent Compatible with surface mounting. Supplied with carrier taping. Guarantees 2000 hours 105. High CV RVR RVL Marking color : Black print Specifications Item Performance 40 to 105 20 Less than 0.01CV or 3 whichever is larger (after 2 minutes) C : Rated capacitance (F), V : Rated voltage (V) Category temperature range () Tolerance at rated capacitance (%) Leakage current (A) Rated voltage (V) tan (max.) Tangent of loss angle (tan) 4 0.50 6.3 0.30 10 0.22 16 0.16 25 0.14 35 0.12 (20,120Hz) (20) 50 0.12 (20,120Hz) Rated voltage (V) Characteristics at high Impedance ratio (max.) Chip Type Aluminum Electrolytic Capacitors and low temperature 25/20 40/20 4 7 15 6.3 4 8 10 3 6 16 2 4 25 2 4 35 2 3 50 2 3 (120Hz) 2000 hours The initial specified value or less Within 20% of initial value(5 or Smaller(16V or less):30%) 200% or less of the initial specified value Test time Leakage current Percentage of capacitance change Tangent of loss angle Endurance (105) Shelf life (105) Test time : 1000 hours ; other items are the same as those for the endurance. Voltage application treatment Applicable standards JIS C5101-1 1998,18 1999(IEC 60384-1 1992, -18 1993) Outline Drawing Unit : mm Coefficient of Frequency for Rated Ripple Current Frequency (Hz) C (P B0.2 D0.5 W L 5060 120 1k 10k100k 0.80 0.80 0.50 1.00 1.00 1.00 1.15 1.25 1.35 1.25 1.40 1.50 6.3 to 16 25 to 35 50 (C A0.2 0.40.2 0.3MAX Rated voltage V Part numbering system (example : 16V100F) RVR Series code 16 Rated voltage symbol V 101 M Rated capacitance Capacitance symbol tolerance symbol F61 U Casing symbol Taping symbol ( ) : Reference size D 4 4 5 5 6.3 6.3 6.3 8 8 10 L 5.30.2 5.80.3 5.30.2 5.80.3 5.30.2 5.80.3 7.70.3 6.50.3 10.50.5 10.50.5 A 4.3 4.3 5.3 5.3 6.6 6.6 6.6 8.4 8.4 10.4 B 4.3 4.3 5.3 5.3 6.6 6.6 6.6 8.4 8.4 10.4 C 2.0 2.0 2.3 2.3 2.7 2.7 2.7 3.4 3.0 3.3 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.7 0.7 W to 0.8 to 0.8 to 0.8 to 0.8 to 0.8 to 0.8 to 0.8 to 0.8 to 1.1 to 1.1 P 1.0 1.0 1.5 1.5 2.0 2.0 2.0 2.3 3.1 4.7 Casing symbol D55 D61 E55 E61 F55 F61 F80 G68 GA5 HA5 Soldering conditions are described on page 13. Land pattern size are described on page 11. The taping spesifications are described on page 14. CAT.No.2013/2014E 62 NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. (R) VERTICAL CHIP TYPE ALUMINUM ELECTROLYTIC CAPACITORS RVR Standard Ratings Rated voltage(V) 4 Case 6.3 Rated ripple current Case 10 Rated ripple current Case 16 Rated ripple current DxL (mm) Casing symbol 4.7 - - - - - - - - - 6.8 - - - - - - - - - Item Rated capacitance(F) 10 - 22 - 33 - (mArms) DxL (mm) - - - - - - 47 4x5.8 D61 42 100 5x5.8 E61 70 - - 150 - 220 330 - (mArms) DxL (mm) - 4x5.3 D55 26 4x5.8 D61 28 5x5.8 E61 40 4x5.8 5x5.3 5x5.8 5x5.8 6.3x5.3 6.3x5.8 D61 E55 E61 E61 F55 F61 42 46 48 70 71 99 - - - 39 39 46 5x5.8 E61 48 5x5.8 6.3x5.3 6.3x5.8 E61 F55 F61 59 65 69 6.3x5.8 F61 82 6.3x7.7 F80 132 8x6.5 G68 146 F61 117 8x6.5 G68 151 - - 6.3x7.7 F80 156 6.3x7.7 F80 183 8x10 G10 320 8x6.5 G68 157 8x10.5 GA5 320 8x10.5 GA5 291 8x10.5 GA5 340 10x10.5 HA5 490 G68 181 8x10.5 GA5 296 - - Case 36 27 D61 E55 E61 6.3x5.8 8x6.5 Rated voltage(V) D61 D61 112 181 - 4x5.8 4x5.8 4x5.8 5x5.3 5x5.8 F61 G68 - 25 28 6.3x5.8 8x6.5 - D55 - D55 95 173 1500 4x5.3 - 4x5.3 F61 296 - 22 66 70 78 G68 - D55 E61 F55 F61 G10 - 4x5.3 5x5.8 6.3x5.3 6.3x5.8 8x6.5 1200 - 74 8x10 - (mArms) 55 163 - Rated ripple current 66 121 - (mArms) DxL (mm) Casing symbol F61 F80 1000 - 8x10 G10 320 8x10 G10 326 8x10 G10 348 8x10.5 GA5 320 8x10.5 GA5 326 8x10.5 GA5 348 10x10 H10 440 10x10.5 HA5 440 10x10 H10 484 - - - - - 10x10.5 HA5 484 - - - 8x10.5 - 8x10.5 10x10 10x10.5 - 10x10.5 35 GA5 340 - - GA5 H10 HA5 370 495 495 10x10.5 HA5 500 - - - - - - - - 10x10.5 HA5 500 - - - - - - HA5 550 - - - - - - - - - - 50 Rated ripple current Case Casing symbol Rated ripple current DxL (mm) Casing symbol 0.22 - - - 4x5.3 D55 2 0.33 - - - 4x5.3 D55 3 0.47 - - - 4x5.3 D55 5 4x5.3 D55 10 4x5.8 D61 12 4x5.3 D55 16 4x5.8 D61 19 4x5.3 D55 16 4x5.8 D61 22 4x5.8 5x5.3 5x5.8 D61 E55 E61 26 23 29 (mArms) DxL (mm) 1 - - - 2.2 - - - 3.3 - - - 4.7 4x5.8 D61 23 (mArms) - - - 5x5.3 E55 23 4x5.8 5x5.3 5x5.8 D61 E55 E61 30 28 39 5x5.8 6.3x5.3 6.3x5.8 E61 F55 F61 35 35 47 5x5.8 E61 52 6.3x5.3 F55 55 33 6.3x5.8 F61 74 47 6.3x5.8 F61 89 6.3x7.7 F80 117 330 6.3x5.8 Case E61 F61 - 220 F61 - - 25 Rated ripple current 5x5.8 6.3x7.7 - 150 6.3x5.8 - Casing symbol 6.3x5.8 6.3x5.8 - 100 41 43 47 163 820 68 33 D61 E55 E61 121 - 22 D61 F80 - 10 4x5.8 4x5.8 5x5.3 5x5.8 F61 - 6.8 - 6.3x7.7 680 Item - Case (mArms) DxL (mm) 6.3x5.8 - Rated capacitance(F) - Casing symbol 8x6.5 G68 130 6.3x7.7 8x6.5 8x10 8x10.5 F80 G68 G10 GA5 142 158 283 283 8x10 G10 293 8x10.5 GA5 293 8x10.5 GA5 302 10x10 H10 450 10x10.5 HA5 450 6.3x5.8 F61 61 6.3x7.7 F80 82 8x6.5 G68 91 6.3x7.7 F80 97 8x6.5 G68 108 - - - 8x10.5 GA5 230 10x10.5 HA5 262 10x10.5 HA5 300 10x10.5 HA5 375 - - - (Note) Rated ripple current : 105C, 120Hz NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. 63 CAT.No.2013/2014E Chip Type Aluminum Electrolytic Capacitors 470 - Casing symbol RVC &KLS7\SH&8VH/RQJ/LIH&DSDFLWRUV (R) VERTICAL CHIP TYPE ALUMINUM ELECTROLYTIC CAPACITORS Compatible with surface mounting. Supplied with carrier taping. Guarantees 3000 hours at 105. (10L:5000 hours). *5((1 &$3 Y& 60' KRXUV $QWL FOHDQLQJ VROYHQW Long life RVC RVL Marking color : Black print Specifications Performance 40 to 105 20 Less than 0.01CV or 3 whichever is larger (after 2 minutes) C : Rated capacitance (F), V : Rated voltage (V) Item Category temperature range () Tolerance at rated capacitance (%) Leakage current (A) Rated voltage (V) tan (max.) Tangent of loss angle (tan) 6.3 0.28 10 0.24 16 0.20 25 0.16 (20,120Hz) (20) 35 0.13 50 0.12 (20,120Hz) Rated voltage (V) Characteristics at high Impedance ratio (max.) Chip Type Aluminum Electrolytic Capacitors and low temperature 25/20 40/20 6.3 4 10 10 3 7 16 2 5 25 2 3 35 2 3 50 2 3 (120Hz) 3000 hours (10L : 5000 hours) The initial specified value or less Within 30% of initial value 300% or less of initial specified value Test time Leakage current Percentage of capacitance change Tangent of the loss angle Endurance (105) Shelf life (105) Test time : 1000 hours ; other items are the same as those for the endurance. Voltage application treatment : According to JIS C5101-1 Applicable standards JIS C5101-1 1998, -18 1999 (IEC 60384-1 1992, -18 1993) Outline Drawing 0.3MAX Coefficient of Frequency for Rated Ripple Current Frequency (Hz) Rated voltage (V) 6.3 to 16 25 to 35 0.1 to 3.3F 50 4.7F to RVC (C) ( ) : Reference size L 5.80.3 5.80.3 5.80.3 7.70.3 6.50.5 10.00.5 10.00.5 A 4.3 5.3 6.6 6.6 8.4 8.4 10.4 B 4.3 5.3 6.6 6.6 8.4 8.4 10.4 C 2.0 2.3 2.7 2.7 3.4 3.0 3.3 120 1k 10k100k 0.8 0.8 0.5 0.7 1 1 1 1 1.15 1.25 1.35 1.35 1.25 1.40 1.50 1.50 Part numbering system (example : 16V47F) W L D 4 5 6.3 6.3 8 8 10 50 (P) B0.2 D0.5 (C) A0.2 0.40.2 Unit : mm 0.5 0.5 0.5 0.5 0.5 0.7 0.7 W to 0.8 to 0.8 to 0.8 to 0.8 to 0.8 to 1.1 to 1.1 P 1.0 1.5 2.0 2.0 2.3 3.1 4.7 Casing symbol D61 E61 F61 F80 G68 G10 H10 Series code 16 Rated voltage symbol V 470 M Rated capacitance Capacitance symbol tolerance symbol F61 U Casing symbol Taping symbol Soldering conditions are described on page 13. Land pattern size are described on page 11. The taping specifications are described on page 14. CAT.No.2013/2014E 64 NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. (R) VERTICAL CHIP TYPE ALUMINUM ELECTROLYTIC CAPACITORS RVC Standard Ratings Rated voltage (V) Item Rated capacitance (F) 0.22 0.33 0.47 1 2.2 3.3 4.7 10 22 33 47 100 220 330 470 1000 6.3 Case Casing D(mm) symbol 4x5.8 D61 5x5.8 E61 6.3x5.8 F61 6.3x7.7 F80 G10 8x10 H10 10x10 10 Case Casing mArms D(mm) symbol 26 5x5.8 E61 46 71 8x10 G10 101 230 313 Rated ripple current 16 Case Casing mArms D(mm) symbol 4x5.8 D61 5x5.8 E61 43 6.3x5.8 F61 6.3x7.7 F80 160 10x10 H10 Rated ripple current 25 Case Casing mArms D(mm) symbol 28 39 6.3x5.8 F61 F80 70 6.3x7.7 8x10 G10 81 10x10 H10 340 Rated ripple current 35 Case Casing mArms D(mm) symbol 4x5.8 D61 5x5.8 E61 6.3x5.8 F61 F80 60 6.3x7.7 65 130 10x10 H10 238 Rated ripple current Rated ripple current mArms 16 28 55 57 220 50 Case Casing D(mm) symbol D61 4x5.8 D61 4x5.8 D61 4x5.8 D61 4x5.8 D61 4x5.8 D61 4x5.8 E61 5x5.8 F61 6.3x5.8 F80 6.3x7.7 G10 8x10 G10 8x10 H10 10x10 Rated ripple current mArms 2.6 3.2 5.0 10 16 17 23 35 58 91 100 160 (Note) Rated ripple current : 105, 120Hz Chip Type Aluminum Electrolytic Capacitors NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. 65 CAT.No.2013/2014E RVD &KLS7\SHY&8VH/RQJ/LIH&DSDFLWRUV (R) VERTICAL CHIP TYPE ALUMINUM ELECTROLYTIC CAPACITORS Compatible with surface mounting. Supplied with carrier taping. Guarantees 2000 hours at 105. (6.3 to 50V 10.5L:5000 hours) *5((1 &$3 60' /RZ= Y& KRXUV $QWL FOHDQLQJ VROYHQW Low Z, Long life RVD RVZ Marking color : Black print Specifications Item Performance 55 to 105 20 Less than 0.01CV or 3 whichever is larger (after 2 minutes) C : Rated capacitance (F) , V : Rated voltage (V) Category temperature range () Tolerance at rated capacitance (%) Leakage current (A) Rated voltage (V) tan (max.) Tangent of loss angle (tan) 6.3 0.26 10 0.19 16 0.16 25 0.14 35 0.12 50 0.10 0.1 63 0.08 (20,120Hz) (20) 80 0.08 100 0.07 (20,120Hz) Rated voltage (V) 25/20 Impedance ratio (max.) 40/20 55/20 Characteristics at high Chip Type Aluminum Electrolytic Capacitors and low temperature 10 2 3 4 6.3 2 3 8 16 2 3 4 25 2 3 3 35 2 3 3 50 2 3 3 63 2 3 3 80 2 3 3 100 2 3 3 (120Hz) Test time Leakage current Percentage of capacitance change Tangent of the loss angle Endurance (105) 2000 hours (6.3 to 50V 10.5L : 5000 hours) The initial specified value or less Within 30% of initial value 200% or less of initial specified value (6.3 to 50V 10.5L : 300% or less) Test time : 1000 hours ; other items are the same as those for the endurance. Voltage application treatment : According to JIS C5101-1 Shelf life (105) JIS C 5101-1 1998, -18 1999(IEC 60384-1 1992, -18 1993) Applicable standards Outline Drawing Unit : mm (P) ( ) : Reference size D 4 5 6.3 6.3 8 8 8 10 10 L 5.80.3 5.80.3 5.80.3 7.70.3 6.50.3 10.00.5 10.50.5 10.00.5 10.50.5 A 4.3 5.3 6.6 6.6 8.4 8.4 8.4 10.4 10.4 Series code W L B 4.3 5.3 6.6 6.6 8.4 8.4 8.4 10.4 10.4 C 2.0 2.3 2.7 2.7 3.4 3.0 3.0 3.3 3.3 0.5 0.5 0.5 0.5 0.5 0.7 0.7 0.7 0.7 W to 0.8 to 0.8 to 0.8 to 0.8 to 0.8 to 1.1 to 1.1 to 1.1 to 1.1 P 1.0 1.5 2.0 2.0 2.3 3.1 3.1 4.7 4.7 50 120 1k 10k100k 0.5 0.5 0.75 1 Part numbering system (example : 16V100F) RVD (C) D0.5 B0.2 (C) A0.2 Frequency (Hz) Rated voltage (V) 6.3 to 100 0.40.2 0.3MAX Coefficient of Frequency for Rated Ripple Current 16 Rated voltage symbol V 101 M Rated capacitance Capacitance symbol tolerance symbol F61 U Casing symbol Taping symbol In the case of for High Temperature Reflow type, a series name is RZB . Casing symbol D61 E61 F61 F80 G68 G10 GA5 H10 HA5 Soldering conditions are described on page 13. Land pattern size are described on page 11. The taping spesifications are described on page 14. CAT.No.2013/2014E 66 NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. VERTICAL CHIP TYPE ALUMINUM ELECTROLYTIC CAPACITORS Standard Ratings Rated voltage (V) Item Rated capacitance (F) 10 22 33 47 100 220 330 470 680 1000 1500 6.3 Case DxL (mm) Casing symbol Rated ripple current ( max.) (mArms) -- -- -- -- 4 X 5.8 D61 1.35 90 -- -- -- -- 4 X 5.8 D61 1.35 90 5 X 5.8 E61 0.70 170 5 X 5.8 E61 0.70 170 6.3 X 5.8 F61 0.36 250 Item capacitance (F)) ( 4 .7 DxL (mm) -- -- 1.35 4 X 5.8 D61 1.35 90 5 X 5.8 E61 0.70 170 -- -- -- -- 90 Rated ripple current ( max.) (mArms) 4 X 5.8 D61 1.35 90 4 X 5.8 D61 1.35 90 5 X 5.8 E61 0.70 170 -- -- -- -- 5 X 5.8 E61 0.70 170 6.3 X 5.8 F61 0.36 250 250 -- -- -- -- 6.3 X 5.8 F61 0.36 6.3 X 7.7 F80 0.30 300 6.3 X 7.7 F80 0.30 300 8 X 6.5 G68 0.30 300 8 X 6.5 G68 0.30 300 F80 0.30 300 8 X 10 G10 0.16 600 8 X 10 G10 0.16 600 8 X 6.5 G68 0.30 300 8 X 10.5 GA5 0.16 600 8 X 10.5 GA5 0.16 600 8 X 10 G10 0.16 600 8 X 10 G10 0.16 600 8 X 10 G10 0.16 600 8 X 10.5 GA5 0.16 600 8 X 10.5 GA5 0.16 600 8 X 10.5 GA5 0.16 600 8 X 10 G10 0.16 600 10 X 10 H10 0.09 850 8 X 10.5 GA5 0.16 600 10 X 10.5 HA5 0.08 850 -- -- -- -- -- -- -- Casing symbol Impedance Rated ripple current ( max.) (mArms) -- -- -- -- 8 X 10 G10 0.16 600 10 X 10 H10 0.09 850 8 X 10.5 GA5 0.16 600 10 X 10.5 HA5 0.08 850 10 X 10 H10 0.09 850 10 X 10.5 HA5 0.08 850 -- -- -- -- Rated ripple current Case Rated ripple current Case ( max.) (mArms) DxL (mm) Casing symbol Impedance DxL (mm) Casing symbol Impedance ( max.) (mArms) DxL (mm) -- -- -- -- 4 X 5.8 D61 1.35 90 4 X 5.8 D61 2.70 60 4 X 5.8 D61 1.35 90 5 X 5.8 E61 1.50 90 5 X 5.8 E61 0.70 170 6.3 X 5.8 F61 0.86 170 5 X 5.8 E61 0.70 170 6.3 X 5.8 F61 0.86 170 6.3 X 7.7 F80 0.66 195 8 X 6.5 G68 0.63 200 6.3 X 7.7 F80 0.66 195 8 X 6.5 G68 0.63 200 8 X 10 G10 0.34 350 8 X 10.5 -- 25 Case 35 1.35 90 22 5 X 5.8 E61 0.70 170 5 X 5.8 E61 0.70 170 6.3 X 5.8 F61 0.36 250 6.3 X 5.8 F61 0.36 6.3 X 7.7 F80 0.30 50 6.3 X 5.8 F61 0.36 250 250 6.3 X 5.8 F61 0.36 250 300 6.3 X 7.7 F80 0.30 300 8 X 10 G10 0.16 600 100 330 (mArms) -- D61 Impedance 6.3 X 7.7 D61 220 ( max.) -- 4 X 5.8 Casing symbol 250 4 X 5.8 47 Case DxL (mm) Casing symbol Rated ripple current 0.36 10 33 16 Impedance F61 6.3 X 5.8 Rated voltage (V) Rated 10 Impedance Case 8 X 6.5 G68 0.30 300 8 X 10.5 GA5 0.16 600 GA5 0.32 350 8 X 10 G10 0.16 600 8 X 10 G10 0.16 600 10 X 10 H10 0.20 700 8 X 10.5 GA5 0.16 600 8 X 10.5 GA5 0.16 600 10 X 10.5 HA5 0.18 700 8 X 10 G10 0.16 600 10 X 10 H10 0.09 850 8 X 10.5 GA5 0.16 600 10 X 10.5 HA5 0.08 850 -- -- -- -- -- -- -- -- -- -- -- Impedance Rated ripple current Case Impedance Rated ripple current ( max.) (mArms) 10 X 10 H10 0.09 850 10 X 10.5 HA5 0.08 850 Casing symbol Impedance Rated ripple current Case ( max.) (mArms) DxL (mm) Casing symbol ( max.) (mArms) DxL (mm) Casing symbol 5 X 5.8 E61 3.00 50 -- -- -- -- -- -- -- -- 10 6.3 X 5.8 F61 1.50 80 6.3 X 7.7 F80 2.40 60 -- -- -- -- 22 6.3 X 7.7 F80 1.20 120 8 X 10 G10 0.90 130 8 X 10 G10 1.30 130 8 X 10.5 GA5 0.90 130 8 X 10.5 GA5 1.30 130 8 X 10 G10 0.65 250 8 X 10 G10 0.90 130 10 X 10 H10 0.70 200 8 X 10.5 GA5 0.65 250 8 X 10.5 GA5 0.90 130 10 X 10.5 HA5 0.70 200 8 X 10 G10 0.65 250 10 X 10 H10 0.50 200 8 X 10.5 GA5 0.65 250 10 X 10.5 HA5 0.50 200 -- -- -- -- 8 X 10 G10 0.65 250 8 X 10.5 GA5 0.65 250 -- -- -- -- -- -- -- -- 10 X 10 H10 0.35 400 10 X 10.5 HA5 0.35 400 -- -- -- -- -- -- -- -- 470 Rated voltage (V) Item Rated capacitance (F) 4 .7 33 47 68 100 -- 63 Case DxL (mm) 80 100 (Note) Impedance : 20C, 100kHz Rated ripple current : 105C, 100kHz NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. 67 CAT.No.2013/2014EA RVV &KLS7\SHY&8VH/RZ,PSHGDQFH&DSDFLWRUV (R) VERTICAL CHIP TYPE ALUMINUM ELECTROLYTIC CAPACITORS *5((1 &$3 60' /RZ= Y& KRXUV $QWL FOHDQLQJ VROYHQW Compatible with surface mounting. Supplied with carrier taping. Guarantees 2000 hours at 105. Low impedance RVV RVD Marking color : Black print Specifications Item Performance 55 to 105 20 Less than 0.01CV or 3 whichever is larger (after 2 minutes) C : Rated capacitance (F) , V : Rated voltage (V) Category temperature range () Tolerance at rated capacitance (%) Leakage current (A) Rated voltage (V) tan (max.) Tangent of loss angle (tan) 6.3 0.26 10 0.19 16 0.16 (20,120Hz) (20) 25 0.14 35 0.12 (20,120Hz) Rated voltage (V) 25/20 Impedance ratio (max.) 40/20 55/20 Characteristics at high Chip Type Aluminum Electrolytic Capacitors and low temperature 6.3 2 3 8 10 2 3 4 16 2 3 4 25 2 3 3 35 2 3 3 (120Hz) Test time Leakage current Percentage of capacitance change Tangent of the loss angle Endurance (105) 2000 hours The initial specified value or less Within 30% of initial value 200% or less of initial specified value Test time : 1000 hours ; other items are the same as those for the endurance. Voltage application treatment : According to JIS C5101-1 Shelf life (105) JIS C 5101-1 1998, -18 1999(IEC 60384-1 1992, -18 1993) Applicable standards Outline Drawing Unit : mm (P) Series code W L 50 120 1k 10k100k 0.5 0.5 0.75 1 Part numbering system (example : 16V100F) RVV (C) D0.5 B0.2 (C) A0.2 Frequency (Hz) Rated voltage (V) 6.3 to 35 0.40.2 0.3MAX Coefficient of Frequency for Rated Ripple Current 16 Rated voltage symbol V 101 M Rated capacitance Capacitance symbol tolerance symbol F61 U Casing symbol Taping symbol ( ) : Reference size D 4 5 6.3 6.3 8 8 10 L 5.80.3 5.80.3 5.80.3 7.70.3 6.50.3 10.50.5 10.50.5 A 4.3 5.3 6.6 6.6 8.4 8.4 10.4 B 4.3 5.3 6.6 6.6 8.4 8.4 10.4 C 2.0 2.3 2.7 2.7 3.4 3.0 3.3 W 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.7 to 1.1 0.7 to 1.1 P 1.0 1.5 2.0 2.0 2.3 3.1 4.7 Casing symbol D61 E61 F61 F80 G68 GA5 HA5 Soldering conditions are described on page 13. Land pattern size are described on page 11. The taping spesifications are described on page 14. CAT.No.2013/2014E 68 NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. (R) VERTICAL CHIP TYPE ALUMINUM ELECTROLYTIC CAPACITORS RVV Standard Ratings Rated voltage (V) Item Rated capacitance (F) 10 22 33 6.3 Case Casing DxLmm symbol 4x5.8 10 max. Rated ripple current mArms Impedance D61 0.85 160 4x5.8 D61 0.85 160 5x5.8 E61 0.36 240 5x5.8 E61 0.36 240 6.3x5.8 F61 0.26 300 100 470 6.3x5.8 F61 0.26 16 max. Rated ripple current mArms Impedance 4x5.8 D61 0.85 160 4x5.8 D61 0.85 160 5x5.8 E61 0.36 240 Case Casing DxLmm symbol Impedance max. Rated ripple current mArms 4x5.8 D61 0.85 160 4x5.8 D61 0.85 160 5x5.8 E61 0.36 240 5x5.8 E61 0.36 240 6.3x5.8 F61 0.26 300 6.3x5.8 F61 0.26 300 6.3x7.7 F80 0.16 600 6.3x7.7 F80 0.16 600 6.3x7.7 F80 0.16 600 8x6.5 G68 0.18 500 8x6.5 G68 0.18 500 8x10.5 GA5 0.08 850 8x10.5 GA5 0.08 850 300 6.3x7.7 F80 0.16 600 8x6.5 G68 0.18 500 8x10.5 GA5 0.08 850 8x10.5 GA5 0.08 850 8x10.5 GA5 0.08 850 8x10.5 GA5 0.08 850 10x10.5 HA5 0.06 1190 330 680 Casing DxLmm symbol 47 220 Case 8x10.5 GA5 0.08 850 10x10.5 HA5 0.06 1190 1500 10x10.5 HA5 0.06 1190 Case Impedance max. Rated ripple current mArms Rated voltage (V) Rated capacitance (F) Item 4.7 10 22 25 Case Casing DxLmm symbol 4x5.8 35 Impedance D61 0.85 4x5.8 D61 0.85 160 4x5.8 D61 0.85 160 5x5.8 E61 0.36 240 5x5.8 E61 0.36 240 6.3x5.8 F61 0.26 300 160 5x5.8 E61 0.36 240 5x5.8 E61 0.36 240 6.3x5.8 F61 0.26 300 6.3x5.8 F61 0.26 300 6.3x5.8 F61 0.26 300 6.3x7.7 F80 0.16 600 6.3x7.7 F80 0.16 600 850 33 47 max. Rated ripple current mArms Casing DxLmm symbol 100 8x6.5 G68 0.18 500 8x10.5 GA5 0.08 220 8x10.5 GA5 0.08 850 8x10.5 GA5 0.08 850 330 8x10.5 GA5 0.08 850 10x10.5 HA5 0.06 1190 470 10x10.5 HA5 0.06 1190 (Note) Impedance : 20 , 100kHz Rated ripple current : 105 , 100kHz NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. 69 CAT.No.2013/2014E Chip Type Aluminum Electrolytic Capacitors 1000 RVZ (R) VERTICAL CHIP TYPE ALUMINUM ELECTROLYTIC CAPACITORS *5((1 &$3 &KLS7\SH&8VH/RZ,PSHGDQFH&DSDFLWRUV Compatible with surface mounting. Supplied with carrier taping. Guarantees 2000 hours at 105. 8x6.5L or less1000hours 12.5x13.5L 5000hours /RZ 60' Y& ,PSHGDQFH KRXUV $QWL FOHDQLQJ VROYHQW Miniaturized Low impedance Low impedance RVH RVZ RVJ Marking color : Black print Marking print (4x5.3L-8x6.5L,12.5x13.5L) : White print print on on brown black sleeve (8x10L-10x10.5L) Specifications Performance 55 to 105 20 Less than 0.01CV or 3 whichever is larger (after 2 minutes) C : Rated capacitance (F) ; V : Rated voltage (V) Item Category temperature range () Tolerance at rated capacitance (%) Leakage current (A) Rated voltage (V) Tangent of loss angle (tan) tan (max.) (20,120Hz) (20) 6.3 0.28 10 0.24 16 0.20 25 0.16 35 0.14 6.3 4 8 10 3 5 16 2 4 25 2 3 35 2 3 (20,120Hz) Rated voltage (V) Chip Type Aluminum Electrolytic Capacitors Characteristics at high and low temperature Impedance ratio (max.) -25/20 -55/20 (120Hz) 1000 hours8x6.5 or less 2000 hours8x10 to 10x10.5L 5000 hours12.5x13.5 Test time Endurance (105) (Applied ripple current) Leakage current Percentage of capacitance change Tangent of the loss angle The initial specified value or less Within 25% of initial value 200% or less of initial specified value Shelf life (105) Test time : 1000 hours ; other items are the same as those for the endurance. Voltage application treatment : According to JIS C5101-1 Applicable standards JIS C5101-1 1998, -18 1999 (IEC 60384-1 1992, -18 1993) Outline Drawing Unit : mm Coefficient of Frequency for Rated Ripple Current Frequency (Hz) 0.3MAX Rated voltage (V) A0.2 (P) RVZ ( ) : Reference size L A B 5.30.2 4.3 4.3 5.80.3 4.3 4.3 5.3 5.30.2 5.3 5.80.3 5.3 5.3 5.30.2 6.6 6.6 5.80.3 6.6 6.6 7.70.3 6.6 6.6 6.50.3 8.4 8.4 10.00.5 8.4 8.4 10.50.5 8.4 8.4 10.00.5 10.4 10.4 10.50.5 10.4 10.4 13.50.5 13.0 13.0 C 2.0 2.0 2.3 2.3 2.7 2.7 2.7 3.4 3.0 3.0 3.3 3.3 4.9 M 0.40.2 0.40.2 0.40.2 0.40.2 0.40.2 0.40.2 0.40.2 0.40.2 0.40.2 0.40.2 0.40.2 0.40.2 0.70.3 W 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.7 to 1.1 0.7 to 1.1 0.7 to 1.1 0.7 to 1.1 1.0 to 1.4 P 1.0 1.0 1.5 1.5 2.0 2.0 2.0 2.3 3.1 3.1 4.7 4.7 4.6 Casing symbol D55 D61 E55 E61 F55 F61 F80 G68 G10 GA5 H10 HA5 E 6 V Rated voltage symbol Series code D 4 4 5 5 6.3 6.3 6.3 8 8 8 10 10 12.5 1k 10k 100k 0.5 0.75 0.9 1.0 10x10.5L or less 6.3V1500F W L 120 Part numbering system (C) D0.5 B0.2 (C) M 6.3 to 35 152 M Rated capacitance Capacitance symbol tolerance symbol HA5 U Casing symbol Taping symbol In the case of for High Temperature Reflow type, a series name is RZA . 12.5x13.5L 6.3V2700F RVZ Series code V 272 M E Rated voltage Rated capacitance Capacitance symbol symbol tolerance symbol Casing symbol 6 T R5 Taping symbol Soldering conditions are described on page 13. Land pattern size are described on page 11. The taping specifications are described on page 14. CAT.No.2013/2014E 70 NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. (R) VERTICAL CHIP TYPE ALUMINUM ELECTROLYTIC CAPACITORS RVZ Standard Ratings Rated voltage (V) Rated Item capacitance (F) 4.7 10 15 6.3 Case 10 ripple Impedance Rated current Case 16 Rated ripple Case Casing Impedance current symbol (mArms) D (mm) () 4x5.3 D55 3.20 65 4x5.3 D55 3.20 4x5.3 D55 3.20 4x5.8 D61 1.80 5x5.3 E55 5x5.8 5x5.3 (mArms) D (mm) 65 4x5.8 D61 80 5x5.3 E55 1.50 110 5x5.3 E61 0.76 150 E55 1.50 110 35 25 D (mm) () Casing symbol ripple Impedance Rated current Casing symbol () Case (mArms) D (mm) Casing symbol ripple Impedance Rated current () 4x5.3 D55 3.20 4x5.8 D61 5x5.3 E55 5x5.8 Case (mArms) D (mm) Rated ripple Casing Impedance current symbol (mArms) () 65 4x5.3 D55 3.20 65 1.80 80 5x5.3 E55 1.50 110 1.50 110 5x5.8 E61 0.76 150 E61 0.76 150 5x5.8 E61 0.76 150 65 4x5.8 D61 1.80 80 1.80 80 5x5.3 E55 1.50 110 5x5.8 E61 0.76 150 5x5.8 E61 0.76 150 1.50 110 5x5.8 E61 0.76 150 6.3x5.3 F55 0.85 170 6.3x5.3 F55 0.85 170 E55 1.50 110 6.3x5.3 F55 0.85 170 6.3x5.3 F55 0.85 170 6.3x5.3 F55 0.85 170 5x5.8 E61 0.76 150 6.3x5.8 F61 0.44 230 6.3x5.8 F61 0.44 230 6.3x5.8 F61 0.44 230 6.3x5.3 F55 0.85 170 6.3x5.3 F55 0.85 170 6.3x5.3 F55 0.85 170 6.3x5.8 F61 0.44 230 6.3x7.7 F80 0.34 280 8x6.5 G68 0.34 280 6.3x7.7 F80 0.34 280 8x6.5 G68 0.34 280 22 33 47 68 5x5.8 E61 0.76 150 6.3x5.8 F61 0.44 230 6.3x5.8 F61 0.44 230 6.3x5.8 F61 0.44 230 6.3x5.8 F61 0.44 230 6.3x5.8 F61 0.44 230 6.3x5.8 F61 0.44 230 6.3x5.8 F61 0.44 230 F55 0.85 170 6.3x5.3 F55 0.85 170 6.3x5.8 F61 0.44 230 6.3x5.8 F61 0.44 230 6.3x5.8 F61 0.44 230 6.3x5.8 F61 0.44 230 100 150 0.34 280 F55 0.85 170 6.3x5.8 F61 0.44 230 8x6.5 G68 0.34 280 6.3x7.7 F80 0.34 280 8x10 G10 0.20 450 8x6.5 G68 0.34 280 8x10.5 GA5 0.17 450 8x10.5 GA5 0.17 450 H10 0.10 670 GA5 0.17 450 10x10 H10 0.10 670 10x10.5 HA5 0.09 670 6.3x7.7 F80 0.34 280 8x10 G10 0.20 450 8x6.5 G68 0.34 280 8x10.5 GA5 0.17 450 6.3x7.7 F80 0.34 280 8x10.5 GA5 0.17 450 6.3x5.8 F61 0.44 230 6.3x7.7 8x6.5 G68 0.34 280 6.3x7.7 F80 0.34 280 8x10 G10 0.20 450 8x10 G10 0.20 450 6.3x7.7 F80 0.34 280 8x10.5 GA5 0.17 450 8x10.5 GA5 0.17 450 H10 0.10 670 H10 0.10 670 220 F80 6.3x5.3 10x10 10x10 8x10.5 H10 0.10 670 GA5 0.17 450 10x10 H10 0.10 670 10x10.5 HA5 0.09 670 12.5x13.5 E 0.06 1100 8x10.5 8x6.5 G68 0.34 200 8x10 G10 0.20 450 8x10.5 GA5 0.17 450 GA5 0.17 450 GA5 0.17 450 H10 0.10 670 10x10 H10 0.10 670 10x10 H10 0.10 670 8x10.5 GA5 0.17 450 10x10.5 HA5 0.09 670 10x10.5 HA5 0.09 670 12.5x13.5 E 0.06 1100 12.5x13.5 E 0.06 1100 8x10.5 GA5 0.17 450 10x10.5 HA5 0.09 670 12.5x13.5 E 0.06 1100 12.5x13.5 E 0.06 1100 10x10 H10 0.10 670 1500 10x10.5 HA5 0.09 670 12.5x13.5 E 0.06 1100 12.5x13.5 E 0.06 1100 2200 12.5x13.5 E 0.06 1100 12.5x13.5 E 0.06 1100 2700 12.5x13.5 E 0.06 1100 330 10x10 8x10.5 10x10 8x10.5 470 10x10 680 1000 (Note) Rated ripple current : 105, 100kHz ; Impedance : 20, 100kHz NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. 71 CAT.No.2013/2014E Chip Type Aluminum Electrolytic Capacitors 6.3x5.3 RVT (R) VERTICAL CHIP TYPE ALUMINUM ELECTROLYTIC CAPACITORS *5((1 &$3 &KLS7\SH&8VH/RZ(65/RQJ/LIH&DSDFLWRUV Compatible with surface mounting. Supplied with carrier taping. Guarantees 2000 hours at 125. 4 to 8x6.5L1000h Y& 60' KRXUV $QWL FOHDQLQJ VROYHQW LowZ, Long Life RVT RVK Marking color : Black print Specifications Item Performance 40 to 125 20 Less than 0.01CV or 3 whichever is larger (after 2 minutes) C : Rated capacitance (F) ; V : Rated voltage (V) Category temperature range () Tolerance at rated capacitance (%) Leakage current (A) 10 0.28 0.24 Rated voltage (V) Tangent of loss angle Tangent of loss angle 16 0.26 0.20 25 0.24 0.16 35 0.2 0.14 50 0.18 0.14 63 0.16 0.12 (20,120Hz) (20) 80 0.16 0.12 100 0.14 0.10 (20,120Hz) Rated voltage (V) Characteristics at high Impedance Ratio (max.) Chip Type Aluminum Electrolytic Capacitors and low temperature 25/20 40/20 10 3 4 16 2 3 25 2 3 35 2 3 50 2 3 63 2 3 80 2 3 100 2 3 (120Hz) 2000 hours 4 to 8x6.5L1000h The initial specified value or less Within -30% to +30% of initial value 300% or less of the initial specified value Test time Leakage current Capacitance change Tangent of loss angle Endurance (125) Shelf life (125) Test time : 1000 hours ; other items are the same as those for the endurance. Voltage application treatment : According to JIS C5101-1 Applicable standards JIS C5101-1 1998, -18 1999 (IEC 60384-1 1992, -18 1993) Outline Drawing Unit : mm Coefficient of Frequency for Rated Ripple Current Frequency (Hz) 10 to 100 (C) RVT W L 120 1k 10k 100k 0.77 0.88 0.96 1.00 Part numbering system(example : 35V220F) (P) B0.2 D0.5 (C) A0.2 0.40.2 0.3MAX Rated voltage(V) Series code 35 Rated voltage symbol V 221 M Rated capacitance Capacitance symbol tolerance symbol HA5 U &DVLQJ V\PERO Taping symbol In the case of for High Temperature Reflow type, a series name is RZC . ( ) : Reference size D 4 5 6.3 6.3 8 8 8 10 10 L 5.80.3 5.80.3 5.80.3 7.70.3 6.50.3 10.00.5 10.50.5 10.00.5 10.50.5 A 4.3 5.3 6.6 6.6 8.4 8.4 8.4 10.4 10.4 B 4.3 5.3 6.6 6.6 8.4 8.4 8.4 10.4 10.4 C 2.0 2.3 2.7 2.7 3.4 3.0 3.0 3.3 3.3 W 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.7 to 1.1 0.7 to 1.1 0.7 to 1.1 0.7 to 1.1 P 1.0 1.5 2.0 2.0 2.3 3.1 3.1 4.7 4.7 Casing symbol D61 E61 F61 F80 G68 G10 GA5 H10 HA5 Soldering conditions are described on page 13. Land pattern size are described on page 11. The taping specifications are described on page 14. CAT.No.2013/2014E 72 NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. VERTICAL CHIP TYPE ALUMINUM ELECTROLYTIC CAPACITORS Standard Ratings Rated voltage (V) Item Rated capacitance (F) 10 10 Case 16 ESR ( max.) Rated ripple current Case DxL (mm) 25 ESR ( max.) Rated ripple current Case (mArms) DxL (mm) ESR ( max.) Rated ripple current (mArms) DxL (mm) 20C -- 40C (mArms) -- -- -- -- 4 x 5.8 3.0 45 50 5 x 5.8 1.5 23 81 20C -- 40C 20C -- 40C 22 4 x 5.8 3.0 45 50 5 x 5.8 1.5 23 81 6.3 x 5.8 1.0 15 114 33 5 x 5.8 1.5 23 81 6.3 x 5.8 1.0 15 114 6.3 x 5.8 1.0 15 114 6.3 x 7.7 0.60 9.0 8 x 6.5 0.60 9.0 180 6.3 x 7.7 0.60 9.0 165 8 x 6.5 0.60 9.0 180 8 x 10 0.20 2.0 340 8 x 10.5 0.20 2.0 340 47 100 -- -- 6.3 x 7.7 -- -- -- -- 9.0 0.60 -- -- 165 220 330 470 8 x 6.5 0.60 9.0 180 8 x 10 0.20 2.0 340 8 x 10.5 0.20 2.0 340 10 x 10 0.15 1.5 500 10 x 10.5 0.15 1.5 500 10 x 10 0.15 1.5 500 10 x 10.5 0.15 1.5 500 Rated voltage (V) Item Rated capacitance (F) 4 .7 10 22 220 DxL (mm) 20C Item capacitance (F) 10 22 33 -- 8 x 10 0.20 2.0 340 8 x 10 0.20 2.0 340 8 x 10.5 0.20 2.0 340 8 x 10.5 0.20 2.0 340 10 x 10 0.15 1.5 500 10 x 10 0.15 1.5 500 10 x 10.5 0.15 1.5 500 10 x 10.5 0.15 1.5 500 10 x 10 0.15 1.5 500 10 x 10 0.15 1.5 500 10 x 10.5 0.15 1.5 500 10 x 10.5 0.15 1.5 500 -- -- -- -- -- -- Rated ripple current Case -- -- -- 40C (mArms) DxL (mm) 20C -- 40C (mArms) DxL (mm) 20C -- 40C (mArms) -- -- -- -- -- -- -- -- 6.3 x 7.7 1.8 36 95 8 x 10 0.70 14 140 8 x 10.5 0.70 14 140 8 x 10 0.70 14 140 8 x 10.5 0.70 14 140 45 50 5 x 5.8 58 15 1.5 23 81 6.3 x 5.8 1.0 15 114 6.3 x 5.8 1.0 15 114 9.0 63 Case 3.0 0.60 -- 165 Rated ripple current 4 x 5.8 165 ESR ( max.) 6.3 x 5.8 3.2 48 58 6.3 x 7.7 1.2 18 95 ESR ( max.) Rated ripple current 6.3 x 7.7 1.2 8 x 10 0.50 7.5 180 10 x 10 0.50 10 200 8 x 10.5 0.50 7.5 180 10 x 10.5 0.50 10 200 18 95 8 x 6.5 0.60 9.0 180 6.3 x 7.7 0.60 9.0 165 8 x 10 0.50 7.5 180 8 x 10 0.70 14 140 8 x 6.5 0.60 9.0 180 8 x 10.5 0.50 7.5 180 8 x 10.5 0.70 14 140 8 x 10 0.20 2.0 340 10 x 10 0.30 4.5 280 10 x 10 0.50 10 200 8 x 10.5 0.20 2.0 340 10 x 10.5 0.30 4.5 280 10 x 10.5 0.50 10 200 8 x 10 0.20 2.0 340 8 x 10.5 0.20 2.0 340 10 x 10 0.30 4.5 280 10 x 10 0.15 1.5 500 -- -- -- -- 10 x 10.5 0.15 1.5 500 10 x 10.5 0.30 4.5 280 10 x 10 0.15 1.5 500 10 x 10.5 0.15 1.5 500 -- -- -- -- -- -- -- Rated voltage (V) Rated -- 114 50 ESR ( max.) 33 100 -- 15 1.0 35 Case 6.3 x 7.7 47 6.3 x 5.8 -- 80 Case 100 ESR ( max.) Rated ripple current Case ESR ( max.) Rated ripple current DxL (mm) 20C -- 40C (mArms) DxL (mm) 20C -- 40C (mArms) 8 x 10 0.75 15 110 8 x 10 0.75 15 110 8 x 10.5 0.75 15 110 8 x 10.5 0.75 15 110 8 x 10 0.75 15 110 8 x 10 0.75 15 110 8 x 10.5 0.75 15 110 0.75 15 110 10 x 10 0.55 11 150 10 x 10 0.55 11 150 10 x 10.5 0.55 11 150 10 x 10.5 0.55 11 150 8 x 10 0.75 15 110 8 x 10.5 0.75 15 110 10 x 10 0.55 11 150 10 x 10 0.55 11 150 10 x 10.5 0.55 11 150 10 x 10.5 0.55 11 150 8 x 10.5 (Note) ESR : 20C, 100kHz Rated ripple current : 125C, 100kHz NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. 73 CAT.No.2013/2014EA RVK *5((1 &$3 &KLS7\SHY&&DSDFLWRUV (R) VERTICAL CHIP TYPE ALUMINUM ELECTROLYTIC CAPACITORS Y& 60' Y& KRXUV KRXUV Compatible with surface mounting. Supplied with carrier taping. Guarantees 1250 hours at 125. (8 : 1000 hours) (12.5 : 5000 hours) Guarantees 5000 hours at 105. (8 : 4000 hours) $QWL FOHDQLQJ VROYHQW RVK High temperature RVJ Marking color 8, 10 :: Gold Goldprint printononbrown brown sleeve sleeve 12.5 :: White Whiteprint printonon black sleeve brown sleeve Specifications Performance 40 to 125 20 Less than 0.02CV or 3 whichever is larger (after 2 minutes) C : Rated capacitance (F) ; V : Rated voltage (V) Item Category temperature range () Tolerance at rated capacitance (%) Leakage current (A) 10 0.28 Rated voltage (V) Tangent of loss angle (tan) tan (max.) 16 0.26 25 0.24 35 0.20 (20,120Hz) (20) 50 0.19 63 0.18 (20,120Hz) Rated voltage (V) Characteristics at high and low temperature 10 3 5 -25/20 -40/20 Impedance ratio (max.) 16 3 5 25 3 5 35 3 5 50 3 5 63 3 5 (120Hz) Chip Type Aluminum Electrolytic Capacitors Endurance (Applied ripple current) Test temp. Test time Percentage of capacitance change Tangent of the loss angle Leakage current Shelf life Test temp. Test time Percentage of capacitance change Tangent of the loss angle Leakage current 125 105 8 : 4000h, 10 : 5000h 8 : 1000h, 10 : 1250h, 12.5 : 5000h Within 30% of initial value 300% or less of the initial specified value The initial specified value or less 125 105 500 h 1000h Within 20% of initial value 200% or less of the initial specified value The initial specified value or less JIS C5101-1 1998, -18 1999 (IEC 60384-1 1992, -18 1993) Applicable standards Outline Drawing Unit : mm Coefficient of Frequency for Rated Ripple Current 8,10 Frequency (Hz) 0.3MAX A0.2 M 10 to 63 (C) (P) B0.2 100 220 to 330 470 to 1000 (C) D0.5 C 3.0 3.3 M W P 0.40.2 0.7 to 1.1 3.1 0.40.2 0.7 to 1.1 4.7 Casing symbol G10 H10 12.5 13.50.5 13.0 13.0 4.9 0.70.3 1.0 to 1.4 4.6 E 10 DxL (mm) symbol RVK Series code Rated ripple current Case Casing RVK DxL ( max.) (mArms) (mm) symbol 25 Impedance Rated ripple current Case Casing DxL ( max.) (mArms) (mm) symbol symbol tolerance symbol 35 Impedance Rated ripple current Case Casing DxL ( max.) (mArms) (mm) symbol Rated ripple current 33 100 8x10 G10 0.68 60 10x10 H10 0.55 111 330 10x10 H10 0.55 470 12.5x13.5 E 0.105 680 12.5x13.5 E 0.105 1000 12.5x13.5 E 0.105 220 8x10 G10 0.68 60 10x10 H10 111 10x10 H10 579 12.5x13.5 E 579 12.5x13.5 E 579 8x10 G10 0.68 60 10x10 H10 0.55 102 Case Casing DxL ( max.) (mArms) (mm) Taping symbol 50 Impedance T R5 symbol V Casing symbol Taping symbol E H10 U Casing symbol M M Capacitance 221 Rated capacitance Capacitance symbol tolerance symbol 471 1 1 1 Rated capacitance 10 100k Rated voltage 22 47 10k 0.90 0.95 0.96 12.5 10V470F 16 Impedance 1k 0.75 0.85 0.88 V 16 Rated voltage symbol Series code 10 Item Case Casing 120 0.40 0.50 0.60 8,10 (16V220F) Standard Ratings Rated capacitance (F) 1 Part numbering system Soldering conditions are described on page 13. Land pattern size are described on page 11. The taping specifications are described on page 14. Rated voltage (V) 100k Frequency (Hz) A B 8.4 8.4 10.4 10.4 L 100.5 100.5 10k 0.96 Rated capacitance (F) ( ) : Reference size D 8 10 1k 0.88 12.5 W L 120 0.77 Rated voltage (V) 8x10 symbol G10 63 Impedance Rated ripple current Case Casing DxL ( max.) (mArms) (mm) 0.80 38 symbol Impedance Rated ripple current ( max.) (mArms) 10x10 H10 0.65 45 8x10 G10 0.80 38 8x10 G10 1.00 33 10x10 H10 0.65 48 10x10 H10 0.67 48 8x10 G10 0.80 40 58 10x10 H10 0.60 58 10x10 H10 0.60 8x10 G10 0.68 55 8x10 G10 0.80 40 10x10 H10 0.60 10x10 H10 0.55 70 10x10 H10 0.60 58 12.5x13.5 E 0.176 447 12.5x13.5 E 0.136 509 12.5x13.5 E 0.176 447 12.5x13.5 E 0.136 509 10x10 H10 0.55 102 10x10 H10 0.55 102 12.5x13.5 E 0.105 579 58 107 10x10 H10 0.55 107 0.55 111 12.5x13.5 E 0.105 579 12.5x13.5 E 0.105 579 0.105 579 12.5x13.5 E 0.105 579 12.5x13.5 E 0.105 579 0.105 579 0.55 (Note) Impedance : 20, 100kHz : Rated ripple current : 125, 100kHz CAT.No.2013/2014E 74 NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. (R) VERTICAL CHIP TYPE ALUMINUM ELECTROLYTIC CAPACITORS *5((1 &$3 &KLS7\SH&&DSDFLWRUV 60' Y& KRXUV RVX $QWL FOHDQLQJ VROYHQW Compatible with surface mounting. Supplied with carrier taping. Guarantees 1000 hours 135. High temperature RVX RVT Marking color : Black print Specifications Item Performance 40 to 135 20 Less than 0.01CV or 3 whichever is larger (after 2 minutes) C : Rated capacitance (F) ; V : Rated voltage (V) Category temperature range () Tolerance at rated capacitance (%) Leakage current (A) 25 0.24 Rated voltage (V) tan (max.) Tangent of loss angle (tan) (20,120Hz) (20) 35 0.20 (20,120Hz) Rated voltage (V) Characteristics at high Impedance Ratio (max.) 35 2 3 (120Hz) 1000 hours The initial specified value or less Within 20% of initial value 300% or less of the initial specified value Test time Leakage current Percentage of Capacitance change Tangent of loss angle Endurance (135) Shelf life (135) Test time : 500 hours ; other items are the same as those for the endurance. Voltage application treatment JIS C5101-1 1998, -18 1999 (IEC 60384-1 1992, -18 1993) Applicable standards Outline Drawing Coefficient of Frequency for Rated Ripple Current Unit : mm Frequency (Hz) 0.40.2 0.3MAX Rated voltage(V) 25 to 35 1k 10k 100k 0.77 0.88 0.96 1.00 Part numbering system(example : 35V220F) (P) B0.2 D0.5 (C) A0.2 120 (C) RVX Series code 25 Rated voltage symbol V 331 M Rated capacitance Capacitance symbol tolerance symbol HA5 U &DVLQJ V\PERO Taping symbol W L ( ) : Reference size 8 10 10.50.5 10.50.5 8.4 10.4 3.1 4.7 0.7 to 1.1 0.7 to 1.1 3.0 3.3 8.4 10.4 Casing symbol GA5 HA5 Soldering conditions are described on page 13. Land pattern size are described on page 11. The taping specifications are described on page 14. Standard Ratings Rated voltage (V) Rated capacitance (F) Item 22 33 47 100 220 330 25 Case DxLmm 35 Casing symbol max. Rated ripple current mArms ESR DxLmm Casing symbol max. Rated ripple current mArms 8x10.5 GA5 0.70 115 Case ESR 8x10.5 GA5 0.70 115 8x10.5 GA5 0.70 115 10x10.5 HA5 0.50 155 10x10.5 HA5 0.50 155 8x10.5 GA5 0.70 115 8x10.5 GA5 0.70 115 10x10.5 HA5 0.50 155 10x10.5 HA5 0.50 155 8x10.5 GA5 0.70 115 8x10.5 GA5 0.70 115 10x10.5 HA5 0.50 155 10x10.5 HA5 0.50 155 8x10.5 GA5 0.70 115 10x10.5 HA5 0.50 155 10x10.5 HA5 0.50 155 10x10.5 HA5 0.50 155 NoteESR 20100kHz Rated ripple current : 135 , 100kHz NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. 75 CAT.No.2013/2014E Chip Type Aluminum Electrolytic Capacitors and low temperature 25 2 3 25/20 40/20 RV *5((1 &$3 &KLS7\SHY&8VH/RQJ/LIH%LSRODU&DSDFLWRUV (R) VERTICAL CHIP TYPE ALUMINUM ELECTROLYTIC CAPACITORS 60' Y& KRXUV $QWL FOHDQLQJ VROYHQW Compatible with surface mounting. Supplied with carrier taping. Guarantees 2000 hours 105. Long life 59, 593 Marking color : Black print Specifications Item Performance 40 to 105 20 Less than 0.01CV or 3 whichever is larger (after 2 minutes) C : Rated capacitance (F) , V : Rated voltage (V) Category temperature range () Tolerance at rated capacitance (%) Leakage current (A) Rated voltage (V) tan (max.) Tangent of loss angle (tan) (20,120Hz) (20) 10 0.22 16 0.16 25 0.14 35 0.12 50 0.12 6.3 4 8 10 3 6 16 2 4 25 2 4 35 2 3 50 2 3 (20,120Hz) Rated voltage (V) -25/20 Impedance ratio (max.) -40/20 Characteristics at high and low temperature Chip Type Aluminum Electrolytic Capacitors 6.3 0.30 (120Hz) Test time Leakage current Percentage of capacitance change Tangent of loss angle Endurance (105) 2000 hours (with the polarity inverted every 250 hours) The initial specified value or less Within 20% of initial value 200% or less of the initial specified value Test time : 1000 hours ; other items are the same as those for the endurance. Voltage application treatment Shelf life (105) Applicable standards JIS C5101-1 1998, -18 1999 (IEC 60384-1 1992, -18 1993) Outline Drawing Unit : mm Frequency (Hz) 0.40.2 0.3MAX Coefficient of Frequency for Rated Ripple Current 50 (C) RV A 4.3 5.3 6.6 B 4.3 5.3 6.6 C 2.0 2.3 2.7 1k 10k100k 1.00 1.00 1.00 1.00 1.15 1.25 1.35 1.35 1.25 1.40 1.50 1.50 W 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 P 1.0 1.5 2.0 V 6 Rated voltage symbol Series code ( ) : Reference size L 5.80.3 5.80.3 5.80.3 120 0.80 0.80 0.50 0.70 Part numbering system (example : 6.3V47F) W L D 4 5 6.3 5060 6.3 to 16 25 to 35 0.1 to 3.3F 4.7F (P) B0.2 D0.5 (C) A0.2 Rated voltage (V) Casing symbol D61 E61 F61 470 M Rated capacitance symbol Capacitance tolerance symbol F61 U Casing symbol Taping symbol Soldering conditions are described on page 13. Land pattern size are described on page 11. The taping specifications are described on page 14. Standard Ratings Rated voltage (V) Rated capacitance (F) 0.22 0.33 0.47 1 2.2 Item 6.3 Case D (mm) 10 Rated ripple current mArms Case D (mm) 16 Rated ripple current mArms Case D (mm) 25 Rated ripple current mArms Case D (mm) 35 Rated ripple current mArms Case D (mm) 4 50 Rated ripple current mArms 10 3.3 4 12 4.7 10 22 33 47 6.3 45 4 6.3 20 41 5 25 4 6.3 6.3 12 28 55 Case D (mm) 4 4 4 4 5 6.3 6.3 Rated ripple current mArms 3 3 5 10 17 20 23 (Note) Rated ripple current : 105, 120Hz CAT.No.2013/2014E 76 NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. (R) VERTICAL CHIP TYPE ALUMINUM ELECTROLYTIC CAPACITORS &KLS7\SH&8VH/DUJH&DSDFLWDQFH&DSDFLWRUV Compatible with surface mounting. For Vibration resistance. Supplied with carrier taping. Guarantees 2000 hours at 105 C. Y& 9LEUDWLRQ 60' 5HVLVWDQFH KRXUV RTJ $QWL FOHDQLQJ VROYHQW RTJ Vibration resistance RVJ Marking color : White print on a brown sleeve 6SHFLILFDWLRQV Performance 55 to 105 20 Less than 0.01CV or 3 whichever is larger (after 2 minutes) C : Rated capacitance (F) ; V : Rated voltage (V) Item Category temperature range () Tolerance at rated capacitance (%) Leakage current (A) Rated voltage (V) tan (max.) Tangent of loss angle (tan) 6.3 0.30 10 0.26 16 0.22 25 0.16 35 0.13 50 0.12 (20,120Hz) (20) 63 0.11 100 0.10 (20,120Hz) Rated voltage (V) Characteristics at high 16 2 4 25 2 3 35 2 3 50 2 3 63 2 3 100 2 3 (120Hz) Test time Leakage current Percentage of capacitance change Tangent of the loss angle Endurance (105) (Applied ripple current) 2000 hours The initial specified value or less Within 20% of initial value 200% or less of the initial specified value Shelf life (105) Test time : 1000 hours; other items are the same as those for the endurance. Voltage application treatment : According to JIS C5101-1 Applicable standards JIS C5101-1 1998, -18 1999 (IEC 60384-1 1992, -18 1993) 2XWOLQH'UDZLQJ Coefficient of Frequency for Rated Ripple Current Unit : mm Frequency (Hz) 0.40.2 0.3MAX Rated voltage (V) (C) A B L 100.5 8.4 8.4 8 10 10.50.5 10.4 10.4 10k100k 0.80 0.80 0.80 0.70 1 1 1 1 1.15 1.25 1.35 1.35 1.25 1.40 1.50 1.50 Part numbering system (example: 25V220F) W1 C W2 3.0 0.7 to 1.1 1.50.2 3.3 0.7 to 1.1 1.50.2 RTJ W1 (P2) D 1k (P1) W2 B0.2 D0.5 (W3) L 120 6.3 to 16 25 to 35 50 to 63 100 (C) A0.2 5060 ( W3 2.0 3.0 Series code ) : Reference size P1 3.1 4.7 V 25 Rated voltage symbol 221 M Rated capacitance symbol Capacitance tolerance symbol H11 U Casing symbol Taping symbol P2 Casing symbol G10 4.4 H11 4.4 Soldering conditions are described on page 13. Land pattern size are described on page 11. The taping specifications are described on page 14. Standard Ratings Rated voltage Rated capacitance (F) D(mm) Casing symbol 16 10 6.3 (V) Item Case ESR Rated ripple current Case mArmsD(mm) Casing symbol ESR Rated ripple current Case mArmsD(mm) Casing symbol 35 25 ESR Rated ripple current Case mArmsD(mm) Casing symbol ESR Rated ripple current Case mArmsD(mm) Casing symbol 50 ESR Rated ripple current Case mArmsD(mm) Casing symbol 100 63 ESR Rated ripple current Case mArmsD(mm) Rated ripple current Case mArmsD(mm) ESR Rated ripple current mArms 22 8x10 G10 8.3 99 33 8x10 G10 6.0 178 10x10.5 H11 5.5 160 47 8x10 G10 4.6 178 8x10 G10 4.2 178 10x10.5 H11 3.9 160 100 8x10 G10 3.6 178 8x10 G10 2.7 178 10x10.5 H110.98 324 Casing symbol H11 2.2 324 ESR 10 10x10.5 Casing symbol 8x10 G10 16.6 67 10x10.5 H11 7.5 133 H11 2.0 324 220 8x10 G10 2.3 178 8x10 G10 2.0 178 10x10.5 H11 1.7 324 10x10.5 H11 1.2 324 10x10.5 330 8x10 G10 1.5 178 10x10.5 H11 1.3 324 10x10.5 H11 1.1 324 10x10.5 H110.80 324 470 10x10.5 H11 1.0 324 10x10.5 H110.92 324 10x10.5 H110.78 324 (Note) Rated ripple current : 105, 120Hz ; ESR : 20, 120Hz NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. 77 CAT.No.2013/2014E Chip Type Aluminum Electrolytic Capacitors and low temperature 10 3 5 6.3 4 8 -25/20 -40/20 Impedance ratio (max.) RTK &KLS7\SH&&DSDFLWRUV (R) VERTICAL CHIP TYPE ALUMINUM ELECTROLYTIC CAPACITORS Y& 9LEUDWLRQ 60' Y& 5HVLVWDQFH KRXUV KRXUV Compatible with surface mounting. For Vibration resistance. Supplied with carrier taping. Guarantees 1250 hours at 125. (8 : 1000 hours) Guarantees 5000 hours at 105. (8 : 4000 hours) $QWL FOHDQLQJ VROYHQW RTK Vibration resistance Marking color : Gold print on a brown sleeve RVK Specifications Item Performance -40 to 125 20 Less than 0.02CV or 3 whichever is larger (after 2 minutes) C : Rated capacitance (F) ; V : Rated voltage (V) Category temperature range () Tolerance at rated capacitance (%) Leakage current (A) Rated voltage (V) tan (max.) Tangent of loss angle (tan) 10 0.28 16 0.26 25 0.24 35 0.20 (20,120Hz) (20) 50 0.19 63 0.18 (20,120Hz) 10 3 5 Rated voltage (V) -25/20 -40/20 Characteristics at high and low temperature Impedance ratio (max.) 16 3 5 25 3 5 35 3 5 50 3 5 63 3 5 Chip Type Aluminum Electrolytic Capacitors (120Hz) 105 125 10 : 1250h, 8 : 1000h 10 : 5000h, 8 : 4000h Within 30% of initial value 300% or less of the initial specified value The initial specified value or less Test temp. Test time Percentage of capacitance change Tangent of the loss angle Leakage current Endurance (Applied ripple current) 125 500 h Test temp. Test time Percentage of capacitance change Tangent of the loss angle Leakage current Shelf life Within 20% of initial value 200% or less of the initial specified value The initial specified value or less JIS C5101-1 1998, -18 1999 (IEC 60384-1 1992, -18 1993) Applicable standards Outline Drawing Coefficient of Frequency for Rated Ripple Current Unit : mm Frequency (Hz) Rated voltage (V) 0.40.2 0.3MAX 10 to 63 1k 10k 100k 0.88 0.96 1 (C) RTK V 16 Rated voltage symbol Series code 221 H11 U M Rated capacitance Capacitance symbol tolerance symbol Casing symbol Taping symbol (W3) W1 (P2) 120 0.77 Part numbering system (example : 16V220F) (P1) W2 D0.5 B0.2 (C) A0.2 L 105 1000h ( ) : Reference size D L A B C W1 W2 W3 P1 P2 Casing symbol 8 100.5 8.4 8.4 3.0 0.7 to 1.1 1.50.2 2.0 3.1 4.4 G10 10 10.50.5 10.4 10.4 3.3 0.7 to 1.1 1.50.2 3.0 4.7 4.4 H11 Soldering conditions are described on page 13. Land pattern size are described on page 11. The taping specifications are described on page 14. Standard Ratings Rated voltage (V) Item Rated capacitance (F) 10 Case ESR 16 Impedance Rated ripple current Case ESR 25 Impedance Rated ripple current Case ESR 35 Impedance Rated ripple current Case ESR 50 Impedance Rated ripple current Case ESR 63 Impedance Rated ripple current Case ESR Impedance Rated ripple current mArmsDxL(mm) max. mArmsDxL(mm) max. mArmsDxL(mm) max. mArmsDxL(mm) max. mArmsDxL(mm) max. mArms DxL(mm) max. 10 22 33 47 8x10 10x10.5 7.1 7.1 0.68 0.58 65 70 8x10 10x10.5 8x10 10x10.5 8x10 10x10.5 8x10 10x10.5 32 32 14 14 10 10 6.7 6.7 0.80 0.65 0.80 0.65 0.80 0.60 0.80 0.60 38 45 38 48 40 58 40 58 8x10 10x10.5 14 14 1.00 0.67 33 48 100 8x10 4.3 0.68 60 8x10 4.0 0.68 60 10x10.5 3.3 0.55 102 220 8x10 10x10.5 2.1 2.1 0.68 0.55 60 111 10x10.5 2.0 0.55 107 10x10.5 1.8 0.55 107 330 10x10.5 1.4 0.55 111 10x10.5 1.3 0.55 111 (Note) Impedance : 20, 100kHz : Rated ripple current : 125, 100kHz ; ESR : 20, 120Hz CAT.No.2013/2014E 78 NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. (R) RTZ VERTICAL CHIP TYPE ALUMINUM ELECTROLYTIC CAPACITORS *5((1 &$3 &KLS7\SHY&8VH/RZ,PSHGDQFH&DSDFLWRUV Compatible with surface mounting. For Vibration resistance. Supplied with carrier taping. Guarantees 2000 hours at 105. 12.5 to 185000hours Y& /RZ 60' ,PSHGDQFH KRXUV $QWL FOHDQLQJ VROYHQW Vibration resistance 57= 59= Marking color : Black print Specifications Item Performance 55 to 105 20 Less than 0.01CV or 3 whichever is larger (after 2 minutes) C : Rated capacitance (F) , V : Rated voltage (V) Category temperature range () Tolerance at rated capacitance (%) Leakage current (A) Rated voltage (V) tan (max.) Tangent of loss angle (tan) (20,120Hz) (20) 6.3 0.28 10 0.24 16 0.20 25 0.16 35 0.14 6.3 4 8 10 3 5 16 2 4 25 2 3 35 2 3 (20,120Hz) 0.02 is added to every 1000F increase over 1000F Characteristics at high and low temperature (120Hz) 2000 hours (8, 10) 5000 hours (12.5 to 18) Test time Endurance (105) (Applied ripple current) The initial specified value or less Within 25% of initial value 200% or less of the initial specified value Leakage current Percentage of capacitance change Tangent of loss angle Test time : 1000 hours ; other items are the same as those for the endurance. Voltage application treatment : According to JIS C5101-1 JIS C5101-1 1998, -18 1999 (IEC 60384-1 1992, -18 1993) Shelf life (105) Applicable standards Outline Drawing Unit : mm Coefficient of Frequency for Rated Ripple Current Frequency (Hz) 6.3 to 35 C A0.2 L RTZ C 3.0 3.0 3.3 3.3 4.9 4.9 5.6 5.6 6.6 6.6 0.7 0.7 0.7 0.7 1.0 1.0 1.0 1.0 1.0 1.0 W to 1.1 to 1.1 to 1.1 to 1.1 to 1.4 to 1.4 to 1.4 to 1.4 to 1.4 to 1.4 10k 100k 0.75 0.9 1.0 6 V Rated voltage symbol HA5 SU U 152 M Rated capacitance symbol Capacitance tolerance symbol Casing symbol Taping symbol 12.5 or more (6.3V2200F) W A B 8.4 8.4 8.4 8.4 10.4 10.4 10.4 10.4 13 13 13 13 17 17 17 17 19 19 19 19 Series code RTZ ( ) : Reference size L 10.00.5 10.50.5 10.00.5 10.50.5 13.50.5 16.00.5 16.50.5 21.50.5 16.50.5 21.50.5 1k 0.5 8, 10 (6.3V1500F) : Dummy terminal D 8 8 10 10 12.5 12.5 16 16 18 18 120 Part numbering system C P B0.2 D0.5 M Rated voltage (V) 0.30Max. P 3.1 3.1 4.7 4.7 4.6 4.6 7.2 7.2 7.2 7.2 M Casing symbol 0.40.2 G10 0.40.2 GA5 H10 0.40.2 0.40.2 HA5 0.70.3 E 0.70.3 H 0.70.3 JH 0.70.3 JM 0.70.3 KH 0.70.3 KM Series code 6 V Rated voltage symbol 222 M E Rated capacitance symbol Capacitance tolerance symbol Casing symbol T Taping symbol Soldering conditions are described on page 13. Land pattern size are described on page 11. The taping specifications are described on page 14. Standard Ratings Rated voltage (V) 6.3 10 16 25 35 Rated ripple Rated ripple Rated ripple Rated ripple Rated ripple Case Case Case Case Case Item Rated Casing Impedance current Casing Impedance current Casing Impedance current Casing Impedance Casing Impedance current current capacitance DxL (mm) symbol ( max.) (mArms) DxL (mm) symbol ( max.) (mArms) DxL (mm) symbol ( max.) (mArms) DxL (mm) symbol ( max.) (mArms) DxL (mm) symbol ( max.) (mArms) (F) 150 - - - - 220 - - - - 330 - - - - - - - - - - - G10 0.20 450 0.17 0.10 0.17 0.10 450 670 450 670 HA5 0.090 670 670 10x10.5 HA5 0.090 670 12.5x13.5 E 0.060 1100 12.5x13.5 16x16.5 12.5x13.5 18x16.5 16x16.6 18x16.5 16x21.5 18x16.5 E JH E JH JH KH JM KH 0.060 0.046 0.060 0.046 0.046 0.042 0.040 0.042 1100 1540 1100 1540 1540 1760 1840 1760 12.5x13.5 16x16.5 16x21.5 18x16.5 16x21.5 18x16.5 E JH JM KH JM KH 0.060 0.046 0.040 0.042 0.040 0.042 1100 1540 1840 1760 1840 1760 18x21.5 KM 0.038 1960 18x21.5 KM 0.038 1960 - - - - - - - - - - - - - - - - - - 8x10.5 GA5 0.17 450 10x10.5 HA5 0.090 1000 8x10.5 10x10 GA5 H10 0.17 0.10 450 670 10x10.5 HA5 0.090 670 12.5x13.5 16x16.5 12.5x13.5 16x16.5 16x16.5 18x16.5 16x21.5 18x16.5 - - E JH E JH JH KH JM KM - - 0.060 0.046 0.060 0.046 0.046 0.042 0.040 0.038 - - 1100 1540 1100 1540 1540 1760 1840 1960 - - 3300 4700 6800 8200 670 0.060 1100 16x16.5 JH 0.046 1540 16x21.5 18x16.5 18x21.5 18x21.5 JM KH KM KM 0.040 0.042 0.038 0.038 1840 1760 1960 1960 - 450 670 450 670 GA5 H10 GA5 H10 470 0.090 - 0.17 0.10 0.17 0.10 8x10.5 10x10 8x10.5 10x10 680 E - GA5 H10 GA5 H10 8x10 450 670 HA5 - 8x10.5 10x10 8x10.5 10x10 - 0.17 0.10 10x10.5 - 450 670 450 670 GA5 H10 12.5x13.5 - 0.17 0.10 0.17 0.10 8x10.5 10x10 1500 - GA5 H10 GA5 H10 8x10.5 10x10 8x10.5 10x10 2200 - - - 10x10.5 8x10.5 10x10 8x10.5 10x10 GA5 H10 GA5 H10 0.17 0.10 0.17 0.10 10x10.5 HA5 0.090 670 12.5x13.5 16x16.5 12.5x13.5 16x16.5 16x16.5 18x16.5 E JH E JH JH KH 0.060 0.046 0.060 0.046 0.046 0.042 1100 1540 1100 1540 1540 1760 - 450 670 450 670 - - - KM 0.038 1960 - - - - - - - - - - - - - - - - 18x21.5 NoteRated ripple current : 105 , 100kHz, Impedance : 20 , 100kHz NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. 79 CAT.No.2013/2014E Chip Type Aluminum Electrolytic Capacitors Rated voltage (V) -25/20 Impedance ratio (max.) -55/20 RTD &KLS7\SHY&8VH/RQJ/LIH&DSDFLWRUV (R) VERTICAL CHIP TYPE ALUMINUM ELECTROLYTIC CAPACITORS *5((1 &$3 Y& /RZ 60' ,PSHGDQFH KRXUV $QWL FOHDQLQJ VROYHQW Compatible with surface mounting. For Vibration resistance. Supplied with carrier taping. Guarantees 5000 hours at 105. Vibration resistance 57' 59' Marking color : Black print Specifications Item Performance 55 to 105 20 Less than 0.01CV or 3 whichever is larger (after 2 minutes) C : Rated capacitance (F) , V : Rated voltage (V) Category temperature range () Tolerance at rated capacitance (%) Leakage current (A) 6.3 0.26 Rated voltage (V) tan (max.) Tangent of loss angle (tan) 16 0.16 10 0.19 35 0.12 25 0.14 63 0.08 50 0.1 (20,120Hz) (20) 100 0.07 80 0.08 (20,120Hz) 0.02 is added to every 1000F increase over 1000F 6.3 2 3 8 16 2 3 4 10 2 3 4 35 2 3 3 25 2 3 3 63 2 3 3 50 2 3 3 100 2 3 3 80 2 3 3 (120Hz) Test time Leakage current Percentage of capacitance change Tangent of loss angle Endurance (105) Shelf life (105) Applicable standards 5000 hours The initial specified value or less Within 30% of initial value 300% or less of the initial specified value Test time : 1000 hours ; other items are the same as those for the endurance. Voltage application treatment : According to JIS C5101-1 JIS C5101-1 1998, -18 1999 (IEC 60384-1 1992, -18 1993) Outline Drawing Coefficient of Frequency for Rated Ripple Current Unit : mm Frequency (Hz) M Rated voltage (V) 0.30Max. RTD C 3.0 3.0 3.3 3.3 4.9 4.9 5.6 5.6 6.6 6.6 0.7 0.7 0.7 0.7 1.0 1.0 1.0 1.0 1.0 1.0 W to 1.1 to 1.1 to 1.1 to 1.1 to 1.4 to 1.4 to 1.4 to 1.4 to 1.4 to 1.4 100k 0.9 1.0 6 V Rated voltage symbol HA5 SU U 152 M Rated capacitance symbol Capacitance tolerance symbol Casing symbol Taping symbol 12.5 or more (6.3V2200F) W A B 8.4 8.4 8.4 8.4 10.4 10.4 10.4 10.4 13 13 13 13 17 17 17 17 19 19 19 19 Series code RTD ( ) : Reference size L 10.00.5 10.50.5 10.00.5 10.50.5 13.50.5 16.00.5 16.50.5 21.50.5 16.50.5 21.50.5 10k 0.75 8, 10 (6.3V1500F) : Dummy terminal D 8 8 10 10 12.5 12.5 16 16 18 18 1k 0.5 Part numbering system C P L 120 6.3 to 100 C A0.2 B0.2 D0.5 Chip Type Aluminum Electrolytic Capacitors Rated voltage (V) -25/20 Impedance ratio (max.) -40/20 -55/20 Characteristics at high and low temperature P 3.1 3.1 4.7 4.7 4.6 4.6 7.2 7.2 7.2 7.2 M Casing symbol 0.40.2 G10 0.40.2 GA5 H10 0.40.2 0.40.2 HA5 0.70.3 E 0.70.3 H 0.70.3 JH 0.70.3 JM 0.70.3 KH 0.70.3 KM 6 Series code V Rated voltage symbol 222 M E Rated capacitance symbol Capacitance tolerance symbol Casing symbol T Taping symbol Soldering conditions are described on page 13. Land pattern size are described on page 11. The taping specifications are described on page 14. Standard Ratings Rated voltage (V) 6.3 10 16 25 35 Rated ripple Rated ripple Rated ripple Rated ripple Rated ripple Case Case Case Case Case Item Rated Casing Impedance current Casing Impedance current Casing Impedance current Casing Impedance Casing Impedance current current capacitance DxL (mm) symbol ( max.) (mArms) DxL (mm) symbol ( max.) (mArms) DxL (mm) symbol ( max.) (mArms) DxL (mm) symbol ( max.) (mArms) DxL (mm) symbol ( max.) (mArms) (F) 100 220 330 470 680 1000 1500 - - - 8x10.5 8x10.5 8x10.5 10x10.5 2200 12.5x13.5 - - - GA5 GA5 GA5 HA5 - - - 0.16 0.16 0.16 0.090 - - - 600 600 600 850 - - 8x10.5 8x10.5 10x10.5 10x10.5 12.5x13.5 - - GA5 GA5 HA5 HA5 E - - 0.16 0.16 0.090 0.090 0.054 - - 600 600 850 850 1160 E 0.054 1160 12.5x13.5 E 0.060 1160 3300 16x16.5 JH 0.044 1620 16x16.5 JH 0.044 1620 4700 6800 8200 18x16.5 18x16.5 18x21.5 KH KH KM 0.040 0.040 0.036 1840 1840 2080 18x16.5 - - KM - - 0.038 - - 2080 - - Rated voltage (V) Case Item Rated capacitance DxL (mm) (F) 100 220 330 470 680 1000 8x10.5 10x10.5 12.5x13.5 16x16.5 16x16.5 18x16.5 - - 8x10.5 8x10.5 10x10.5 12.5x13.5 12.5x13.5 16x16.5 18x16.5 16x21.5 18x16.5 18x21.5 - - - - GA5 GA5 HA5 E E JH KH JM KH KM - - - - 0.16 0.16 0.090 0.054 0.054 0.044 0.040 0.038 0.040 0.036 - - - - 600 600 850 1160 1160 1620 1840 1920 1840 2080 - - - 8x10.5 8x10.5 10x10.5 12.5x13.5 12.5x13.5 16x16.5 16x21.5 18x16.5 - GA5 GA5 HA5 E E JH JM KH - 0.16 0.16 0.090 0.054 0.054 0.044 0.038 0.040 - 600 600 850 1160 1160 1620 1920 1840 18x21.5 KM 0.036 2080 - - - - - - - - - - - - 8x10.5 8x10.5 10x10.5 12.5x13.5 12.5x13.5 16x16.5 18x16.5 GA5 GA5 HA5 E E JH KH 0.16 0.16 0.090 0.054 0.054 0.044 0.040 600 600 850 1160 1160 1620 1840 18x21.5 KM 0.036 2080 - - - - - - - - - - - - - - - - - - - - 50 63 80 100 Rated ripple Rated ripple Rated ripple Rated ripple Case Case Case Casing Impedance current Casing Impedance current Casing Impedance Casing Impedance current current symbol ( max.) (mArms) DxL (mm) symbol ( max.) (mArms) DxL (mm) symbol ( max.) (mArms) DxL (mm) symbol ( max.) (mArms) GA5 HA5 E JH JH KH 0.32 0.18 0.12 0.080 0.080 0.076 350 700 900 1000 1000 1100 12.5x13.5 12.5x13.5 16x16.5 18x16.5 18x21.5 - E E JH KH KM - 0.16 0.16 0.14 0.12 0.10 - 600 600 800 900 1050 - 12.5x13.5 16x16.5 18x16.5 18x21.5 - - E JH KH KM - - NoteRated ripple current : 105 , 100kHz, Impedance : 20 , 100kHz CAT.No.2013/2014E 80 0.18 0.16 0.13 0.11 - - 550 720 830 1000 - - 16x16.5 18x16.5 18x21.5 - - - JH KH KM - - - 0.17 0.15 0.13 - - - 700 800 940 - - - NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. (R) RTT VERTICAL CHIP TYPE ALUMINUM ELECTROLYTIC CAPACITORS *5((1 &$3 &KLS7\SHY&8VH/RZ(65/RQJ/LIH&DSDFLWRUV Compatible with surface mounting. For Vibration resistance. Supplied with carrier taping. Guarantees 2000 hours at 125. 12.5 or more5000h Y& 60' KRXUV $QWL FOHDQLQJ VROYHQW Vibration resistance 577 597 Marking color : Black print Specifications Item Performance 40 to 125 20 Less than 0.01CV or 3 whichever is larger (after 2 minutes) C : Rated capacitance (F) , V : Rated voltage (V) Category temperature range () Tolerance at rated capacitance (%) Leakage current (A) Rated voltage (V) Tangent of loss angle Tangent of loss angle (tan) (20,120Hz) (20) 10 0.24 0.28 16 0.20 0.26 25 0.16 0.24 35 0.14 0.2 50 0.14 0.19 63 0.12 0.15 80 0.12 0.15 100 0.10 0.12 10 3 4 16 2 3 25 2 3 35 2 3 50 2 3 63 2 3 80 2 3 100 2 3 (20,120Hz) 0.02 is added to every 1000F increase over 1000F Characteristics at high and low temperature (120Hz) Test time Leakage current Percentage of capacitance change Tangent of loss angle Endurance (125) 2000 hours (12.5 or more : 5000h) The initial specified value or less Within -30% to +30% of initial value 300% or less of the initial specified value Test time : 1000 hours ; other items are the same as those for the endurance. Voltage application treatment : According to JIS C5101-1 JIS C5101-1 1998, -18 1999 (IEC 60384-1 1992, -18 1993) Shelf life (125) Applicable standards Outline Drawing Unit : mm Coefficient of Frequency for Rated Ripple Current Frequency (Hz) 10 to 100 C A0.2 L C 3.0 3.3 4.9 4.9 5.6 5.6 6.6 6.6 0.7 0.7 1.0 1.0 1.0 1.0 1.0 1.0 W to 1.1 to 1.1 to 1.4 to 1.4 to 1.4 to 1.4 to 1.4 to 1.4 10k 100k 0.88 0.96 1.00 35 V Rated voltage symbol Series code H10 SU U 101 M Rated capacitance symbol Capacitance tolerance symbol Casing symbol Taping symbol 12.5 or more (35V1000F) W A B 8.4 8.4 10.4 10.4 13 13 13 13 17 17 17 17 19 19 19 19 RTT P 3.1 4.7 4.6 4.6 7.2 7.2 7.2 7.2 RTT ( ) : Reference size L 10.00.5 10.00.5 13.50.5 16.00.5 16.50.5 21.50.5 16.50.5 21.50.5 1k 0.77 8, 10 (35V100F) : Dummy terminal D 8 10 12.5 12.5 16 16 18 18 120 Part numbering system C P B0.2 D0.5 M Rated voltage (V) 0.30Max. M Casing symbol 0.40.2 G10 H10 0.40.2 0.70.3 E 0.70.3 H 0.70.3 JH 0.70.3 JM 0.70.3 KH 0.70.3 KM Series code 35 V Rated voltage symbol 102 M KM Rated capacitance symbol Capacitance tolerance symbol Casing symbol T Taping symbol Soldering conditions are described on page 13. Land pattern size are described on page 11. The taping specifications are described on page 14. Standard Ratings Rated voltage (V) 10 Case Item Rated capacitance DxL (mm) (F) 100 - 16 ESR ( max.) 20 - Rated ripple current -40 (mArms) - Case 25 ESR ( max.) DxL (mm) 20 - - - - Rated ripple current -40 (mArms) Case 20 - - - - - 0.25 0.15 0.15 0.086 0.086 0.060 0.060 0.050 0.042 - - - 2.5 1.5 1.5 1.29 1.29 0.90 0.90 0.75 0.63 - - - 340 500 500 750 750 1000 1000 1200 1550 - - - - - - - 8x10 10x10 0.25 0.15 2.5 1.5 340 500 330 8x10 10x10 0.25 0.15 2.5 1.5 340 500 10x10 0.15 1.5 500 470 10x10 0.15 1.5 500 12.5x13.5 0.086 1.29 750 0.086 0.060 0.050 0.050 0.042 - 1.29 0.90 0.75 0.75 0.63 - 750 1000 1200 1200 1550 - 8x10 10x10 10x10 12.5x13.5 12.5x13.5 16x16.5 16x16.5 18x16.5 18x21.5 - - - Rated ripple current Case 680 12.5x13.5 0.086 1.29 750 1000 2200 3300 4700 12.5x13.5 16x16.5 18x16.5 18x21.5 0.086 0.06 0.05 0.042 1.29 0.90 0.75 0.63 750 1000 1200 1550 Rated ripple current Case Rated voltage (V) 63 Case Item Rated capacitance DxL (mm) (F) 47 100 220 330 470 - 12.5x13.5 16x16.5 16x16.5 16x21.5 80 ESR ( max.) 20 - 0.25 0.22 0.22 0.16 -40 (mArms) - 3.75 3.3 3.3 2.4 - 400 500 500 650 20 - 16 x 16.5 16 x 21.5 18 x 21.5 - - 0.24 0.18 0.12 - -40 (mArms) Case 50 ESR ( max.) DxL (mm) 20 8x10 10x10 8x10 10x10 12.5x13.5 16x16.5 0.25 0.15 0.25 0.15 0.086 0.060 2.5 1.5 2.5 1.5 1.29 0.90 16x16.5 0.060 18x16.5 18x21.5 - - - Rated ripple current -40 (mArms) Case ESR ( max.) Rated ripple current DxL (mm) 20 -40 (mArms) 340 500 340 500 750 1000 10x10 12.5x13.5 0.50 0.18 7.5 2.7 250 550 12.5x13.5 0.18 2.7 550 16x16.5 0.12 1.8 850 0.90 1000 18x16.5 0.10 1.5 920 0.050 0.75 1200 - - - - 0.042 - - - 0.63 - - - 1550 - - - - - - - - - - - - - - - - - - - 100 ESR ( max.) DxL (mm) Rated ripple current DxL (mm) 220 12.5x13.5 16x16.5 18x16.5 18x16.5 18x21.5 - 35 ESR ( max.) -40 (mArms) - 3.6 2.7 1.8 - - 480 600 1000 - ESR ( max.) DxL (mm) 20 12.5x13.5 16x16.5 18x21.5 - - 0.32 0.24 0.16 - - Rated ripple current -40 (mArms) 4.8 3.6 2.4 - - 300 480 700 - - NoteRated ripple current : 105 , 100kHz, ESR : 100kHz NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. 81 CAT.No.2013/2014E Chip Type Aluminum Electrolytic Capacitors Rated voltage (V) -25/20 Impedance ratio (max.) -40/20 RYK +RUL]RQWDOW\SH&8VH+LJKWHPSHUDWXUH&DSDFLWRUV (R) HORIZONTAL CHIP TYPE ALUMINUM ELECTROLYTIC CAPACITORS 125 C high temperature surface mount. Highly resistant to vibration. Available in horizontal configurations only. Carrier taping supplied. Guarantees 1000 hours at 125 C. Y& 9LEUDWLRQ 60' 5HVLVWDQFH KRXUV $QWL FOHDQLQJ VROYHQW Horizontal type Large capacitance RYK RVK Marking color : White print on a black case Specifications Item Performance 40 to 125 20 Less than 0.02CV (after 2 minutes) C : Rated capacitance (F) ; V : Rated voltage (V) Category temperature range () Tolerance at rated capacitance (%) Leakage current (A) Rated voltage (V) tan (max.) Tangent of loss angle (tan) 6.3 0.3 10 0.28 16 0.26 25 0.24 (20,120Hz) (20) 35 0.20 50 0.19 63 0.18 (20,120Hz) Rated voltage (V) Characteristics at high Impedance ratio (max.) and low temperature 25/20 40/20 6.3 3 5 10 3 5 16 3 5 25 3 5 35 3 5 50 3 5 63 3 5 Chip Type Aluminum Electrolytic Capacitors (120Hz) Endurance (125) (Applied ripple current) Shelf life (125) Test time Percentage of capacitance change Tangent of the loss angle Leakage current 1000 hours Within 30% of initial value 300% or less of the initial specified value The initial specified value or less Test time Percentage of capacitance change Tangent of the loss angle Leakage current 1000 hours Within 20% of initial value 200% or less of the initial specified value The initial specified value or less Pretreatment performed JIS C5101-1 1998, -18 1999 (IEC 60384-1 1992, -18 1993) Applicable standards Outline Drawing Unit : mm H1 H0 H 0.10.2 -0 L L1 F W 0.10.05 6.5 0.10.05 6.5 F L0 Case size W L0 9.5x24 9.50.5 241 L1 L H F H1 H0 210.5 220.5 9.30.5 9.30.5 9.10.3 3.50.5 10 Rated voltage symbol Series code V 561 Case size W L0 9.5x19 9.50.5 191 Land pattern size are described on page 12. M G5T T Rated capacitance Capacitance symbol tolerance symbol L1 L H H1 H0 F 160.5 170.5 9.30.5 9.30.5 9.10.3 3.50.5 The taping specifications are described on page 13. Coefficient of Frequency for Rated Ripple Current Part numbering system (example: 10V560F) W L0 Soldering conditions are described on page 11. RYK H1 H0 10 2.00.5 L L1 2.00.5 0.10.05 Case Size : 9.5x19.0 6 terminals type : Casing symbol G4 1.50.3 0.10.2 -0 0.10.05 H 1.50.3 Case Size : 9.5x24.0 8 terminals type : Casing symbol G5T Casing symbol Frequency (Hz) Rated voltage (V) 10 to 63 FL Tray polarity symbol 120 1k 10k 100k 0.77 0.88 0.96 1 Standard Ratings Rated voltage (V) Item Rated capacitance (F) 6.3 Case WxL (mm) Case 25 16 10 ripple Impedance Rated current ripple Impedance Rated current Case ripple Impedance Rated current Case 50 35 ripple Impedance Rated current Case ripple Impedance Rated current Case 63 ripple Impedance Rated current Case ripple Impedance Rated current mArms WxL (mm) mArms WxL (mm) mArms WxL (mm) mArms WxL (mm) mArms WxL (mm) mArms WxL (mm) mArms 56 9.5x19.0 0.52 204 82 9.5x19.0 0.49 210 9.5x24.0 0.37 272 100 9.5x19.0 0.40 232 9.5x24.0 0.35 279 220 9.5x19.0 0.40 232 9.5x24.0 0.30 302 270 9.5x19.0 0.40 232 9.5x24.0 0.30 302 470 9.5x19.0 0.40 232 9.5x24.0 0.30 302 560 9.5x19.0 0.40 232 9.5x24.0 0.30 302 820 9.5x24.0 0.30 302 (Note) Rated ripple current : 125, 100kHz ; Impedance : 20, 100kHz CAT.No.2013/2014E 82 NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. (R) ALUMINUM ELECTROLYTIC CAPACITORS 0LQLDWXUH$OXPLQXP(OHFWURO\WLF&DSDFLWRUV Miniature Aluminum Electrolytic Capacitors NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. 83 CAT.No.2013/2014E RC3 *5((1 &$3 PP/6WDQGDUG&DSDFLWRUV (R) MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS Diameters from 3 to 8mm and a height of 5mm. 0LQLDWXUL]DWLRQ 5& 5& Marking color : White print on a blue sleeve (3: black sleeve) Specifications Item Performance 40 to 85 20 Less than 0.01CV or 3 whichever is larger (after 2 minutes) C : Rated capacitance (F); V : Rated voltage (V) Category temperature range () Tolerance at rated capacitance (%) Leakage current (A) Rated voltage (V) 3 to 6.3 8 Tangent of loss angle (tan) tan (max.) Rated voltage (V) -25/20 -40/20 Characteristics at high and low temperature Impedance ratio (max.) 4 0.35 0.39 6.3 0.24 0.28 10 0.20 0.24 16 0.16 0.16 25 0.14 0.14 35 0.12 0.12 50 0.10 0.10 4 6 16 6.3 4 10 10 3 8 16 2 6 25 2 4 35 2 4 50 2 4 (20,120Hz) (120Hz) 1000 hours The initial specified value or less Within 20% of initial value 200% or less of the initial specified value Test time Leakage current Percentage of capacitance change Tangent of the loss angle Endurance (85) (Applied ripple current) (20,120Hz) (20) Shelf life (85) Test time : 1000 hours ; other items are the same as those for the endurance. Voltage application treatment : According to JIS C5101-1 Applicable standards JIS C5101-1, -4 1998 (IEC 60384-1 1992, -4 1985) Unit : mm Coefficient of Frequency for Rated Ripple Current Frequency (Hz) Sleeve d0.05 copper clad steel wire (tinned) F0.5 D0.5max. Miniature Aluminum Electrolytic Capacitors Outline Drawing L max. Rated voltage (V) 4 to 16 25 to 35 50 RC3 Series code D F d Casing symbol 3 1.0 0.4 1.0 B0 4 1.5 0.45 1.0 D0 5 2.0 0.45 1.0 E0 6.3 2.5 0.45 1.0 F0 120 1k 10k100k 0.8 0.8 0.8 1 1 1 1.1 1.5 1.6 1.2 1.7 1.9 Part numbering system (example : 6.3V100F) 5 min. 15min. 5060 8 2.5 0.45 1.0 G0 6 Rated voltage symbol V 101 M F0 Rated capacitance Capacitance symbol tolerance symbol Casing symbol # Additional symbol Taping (Forming) Should add 2 , when size is 3x5L. Standard Ratings 4 Rated voltage (V) Rated capacitance (F) Item Case 6.3 Rated ripple current Case 10 Rated ripple current Case 16 Rated ripple current Case 25 Rated ripple current Case 35 Rated ripple current Case 50 Rated ripple current Case Rated ripple current (mArms) DxL (mm) (mArms) DxL (mm) (mArms) DxL (mm) (mArms) DxL (mm) (mArms) DxL (mm) (mArms) DxL (mm) (mArms) 0.1 3 3x5 0.22 5 (4) * 4x5 0.33 6 (5) * 4x5 0.47 7 (6) * 4x5 1 10 (8) * 4x5 2.2 15 * 4x5 14 (11) 4x5 3.3 * 4x5 15 (13) 18 4x5 17 4x5 4.7 * 4x5 17 (14) 4x5 18 25 4x5 20 5x5 10 * 4x5 4x5 22 4x5 25 5x5 30 40 20 (17) 5x5 30 6.3x5 * 4x5 22 4x5 5x5 35 5x5 40 6.3x5 50 25 (21) 75 30 6.3x5 55 8x5 4x5 33 5x5 5x5 45 6.3x5 60 6.3x5 65 30 90 40 8x5 80 8x5 4x5 47 5x5 6.3x5 65 6.3x5 70 8x5 95 35 50 8x5 100 5x5 100 6.3x5 6.3x5 95 8x5 125 8x5 135 60 85 6.3x5 220 8x5 8x5 155 105 145 8x5 330 8x5 150 175 8x5 470 180 (Note) Rated ripple current : 85, 120Hz ; The types of capacitor marked with a black circle are manufactured in the 3x5 size also ; the figures in the parentheses are applicable to capacitors with 3. DxL (mm) CAT.No.2013/2014E 84 NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. (R) MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS PP/&8VH&DSDFLWRUV *5((1 &$3 Y& KRXUV R3S $QWL FOHDQLQJ VROYHQW Diameters from 4 to 6.3mm and a height of 5mm. Guarantees 1000 hours at 105. R3S High temperature RC3 Marking color : White print on a black sleeve Specifications Performance -55 to 105 20 Less than 0.01CV or 3 whichever is larger (after 2 minutes) C : Rated capacitance (F); V : Rated voltage (V) Item Category temperature range () Tolerance at rated capacitance (%) Leakage current (A) Rated voltage (V) tan (max.) Tangent of loss angle (tan) 6.3 0.28 10 0.24 16 0.20 25 0.14 (20,120Hz) (20) 35 0.12 50 0.10 (20 C,120Hz) Rated voltage (V) -25/20 -40/20 Characteristics at high and low temperature 6.3 3 8 Impedance ratio (max.) 10 3 5 16 2 4 25 2 3 35 2 3 50 2 3 (120Hz) 1000 hours The initial specified value or less Within 20% of initial value 200% or less of the initial specified value Test time Leakage current Percentage of capacitance change Tangent of the loss angle Endurance (105) (Applied ripple current) Shelf life (105) Test time : 1000 hours ; other items are the same as those for the endurance. Voltage application treatment : According to JIS C5101-1 Applicable standards JIS C5101-1, -4 1998 (IEC 60384-1 1992, -4 1985) Unit : mm Coefficient of Frequency for Rated Ripple Current Frequency (Hz) Sleeve Rated voltage (V) d0.05 copper clad steel wire (tinned) F0.5 D0.5max. 6.3 to 16 25 to 35 50 L max. 15min. Casing symbol 4 1.5 0.45 1.0 D0 5 2.0 0.45 1.0 E0 120 1k 10k100k 0.64 0.57 0.53 0.80 0.71 0.67 0.92 0.89 0.90 1 1 1 Part numbering system (example : 16V47F) 5 min. R3S Series code D F d 5060 16 Rated voltage symbol V 470 M F0 # Rated capacitance Capacitance Casing symbol tolerance symbol symbol Taping(Forming) symbol 6.3 2.5 0.45 1.0 F0 Standard Ratings 10 16 25 35 50 6.3 Rated ripple current Rated ripple current Rated ripple current Rated ripple current Rated ripple current Rated ripple current Case Case Case Case Case Case DxL (mm) (mArms) DxL (mm) (mArms) DxL (mm) (mArms) DxL (mm) (mArms) DxL (mm) (mArms) DxL (mm) (mArms) 4x5 5 0.22 4x5 6 0.33 4x5 8 0.47 4x5 11 1 4x5 17 2.2 4x5 20 3.3 4x5 17 5x5 27 4.7 4x5 15 4x5 18 4x5 20 6.3x5 45 10 4x5 23 5x5 31 5x5 34 20 4x5 22 4x5 26 5x5 38 6.3x5 53 6.3x5 57 34 5x5 33 5x5 33 6.3x5 56 6.3x5 66 43 5x5 47 5x5 45 6.3x5 65 6.3x5 58 100 6.3x5 78 (Note) Rated ripple current : 105, 100kHz. Rated voltage (V) Item Rated capacitance (F) NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. 85 CAT.No.2013/2014E Miniature Aluminum Electrolytic Capacitors Outline Drawing RB3 PP/%LSRODU&DSDFLWRUV (R) MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS *5((1 &$3 Diameters from 4 to 6.3mm and a height of 5mm. Low Profile RB3 RB2 Bipolar RC3 Marking color : White print on a blue sleeve Specifications Performance -40 to 85 20 Less than 0.03CV 3 (after 5 minutes) C : Rated capacitance (F); V : Rated voltage (V) Item Category temperature range () Tolerance at rated capacitance (%) Leakage current (A) Rated voltage (V) Tangent of loss angle (tan) 6.3 0.35 0.30 4 5, 6.3 tan (max.) 10 0.30 0.25 16 0.25 0.20 25 0.20 0.15 (20,120Hz) (20) 35 0.20 0.15 50 0.20 0.15 (20,120Hz) 1000 hours (with the polarity inverted every 250 hours) The initial specified value or less Within20% of initial value 200% or less of the initial specified value Test time Leakage current Percentage of capacitance change Tangent of the loss angle Endurance (85) (Applied ripple current) JIS C5101-1, -4 1998 (IEC 60384-1 1992, -4 1985) Applicable standards Outline Drawing Unit : mm &RHIILFLHQWRI)UHTXHQF\IRU5DWHG5LSSOH&XUUHQW Frequency (Hz) Sleeve F0.5 Miniature Aluminum Electrolytic Capacitors D0.5max. d0.05 copper clad steel wire (tinned) L max. PLQ Rated voltage (V) 6.3 to 16 25 to 35 50 Casing symbol 4 1.5 0.45 1.0 D0 5 2.0 0.45 1.0 E0 120 1k 10k100k 0.8 0.8 0.8 1 1 1 1.1 1.5 1.6 1.2 1.7 1.9 Part numbering system (example : 10V47F) 5 min. RB3 Series code D F d 5060 10 Rated voltage symbol V 470 M Rated capacitance Capacitance symbol tolerance symbol F0 Casing symbol # Taping(Forming) symbol 6.3 2.5 0.45 1.0 F0 6WDQGDUG5DWLQJV Rated voltage (V) Rated capacitance (F) 0.22 0.33 0.47 1 2.2 3.3 4.7 10 22 33 47 Item 10 16 25 35 50 6.3 Rated ripple current Rated ripple current Rated ripple current Rated ripple current Rated ripple current Rated ripple current Case Case Case Case Case Case DxL (mm) (mArms) DxL (mm) (mArms) DxL (mm) (mArms) DxL (mm) (mArms) DxL (mm) (mArms) DxL (mm) (mArms) 4x5 3 4x5 4 4x5 5 4x5 7 5x5 4x5 14 11 4x5 6.3x5 13 5x5 20 17 4x5 5x5 14 6.3x5 21 6.3x5 24 24 4x5 5x5 6.3x5 26 35 6.3x5 18 35 5x5 6.3x5 6.3x5 45 31 40 6.3x5 6.3x5 45 49 6.3x5 6.3x5 54 59 (Note) Rated ripple current : 85, 120Hz. CAT.No.2013/2014E 86 NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. (R) MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS $QWL *5((1 FOHDQLQJ &$3 VROYHQW PP/6WDQGDUG&DSDFLWRUV RC2 Conventional RC2 further downsized, diameters from 4 to 8mm. Guarantees 1000 hours at 85. Low Profile RC2 RE3 Marking color : White print on a blue sleeve Specifications Performance -40 to 85 20 Less than 0.01CV or 3 whichever is larger (after 2 minutes) C : Rated capacitance (F); V : Rated voltage (V) Item Category temperature range () Tolerance at rated capacitance (%) Leakage current (A) Rated voltage (V) tan (max.) Tangent of loss angle (tan) 4 0.35 6.3 0.24 10 0.20 16 0.16 25 0.14 35 0.12 50 0.10 (20,120Hz) (20) 100 0.08 63 0.08 (20,120Hz) Rated voltage (V) -25/20 -40/20 Characteristics at high and low temperature 4 6 16 Impedance ratio (max.) 6.3 4 10 10 3 8 16 2 6 25 2 4 35 2 4 50 2 4 63 2 4 100 2 4 (120Hz) Test time Leakage current Percentage of capacitance change Tangent of the loss angle Endurance (85) (Applied ripple current) 1000 hours The initial specified value or less Within 20% of initial value 200% or less of the initial specified value Shelf life (85) Test time : 1000 hours ; other items are the same as those for the endurance. Voltage application treatment : According to JIS C5101-1 Applicable standards JIS C5101-1, -4 1998 (IEC 60384-1 1992, -4 1985) Unit : mm Coefficient of Frequency for Rated Ripple Current Frequency (Hz) Sleeve Rated voltage (V) 4 to 16 25 to 35 50 to 100 F0.5 D0.5max. d0.05 copper clad steel wire (tinned) L max. 15min. Casing symbol 4 1.5 0.45 1.0 D1 5 2.0 0.45 1.0 E1 RC2 5 min. 6.3 2.5 0.45 1.0 F1 120 1k 10k100k 0.8 0.8 0.8 1 1 1 1.1 1.5 1.6 1.2 1.7 1.9 Part numbering system (example : 10V220F) Series code D F d 5060 V 10 Rated voltage symbol 221 M G1 # Rated capacitance Capacitance Casing symbol tolerance symbol symbol Optional symbol Taping(Forming) symbol 8 3.5 0.45 1.0 G1 Standard Ratings 4 Rated voltage (V) Item Rated capacitance (F) Case DxL (mm) 4x7 4x7 5x7 6.3x7 8x7 (Note) Rated ripple current : 0.33 0.47 1 2.2 3.3 4.7 10 22 33 47 100 220 330 6.3 Rated ripple current Case Rated ripple current 10 Case Rated ripple current 16 Case 25 Rated ripple current Case Rated ripple current 35 Case Rated ripple current 50 Case Rated ripple current 63 Case Rated ripple current 100 Case Rated ripple current (mArms) DxL (mm) (mArms) DxL (mm) (mArms) DxL (mm) (mArms) DxL (mm) (mArms) DxL (mm) (mArms) DxL (mm) (mArms) DxL (mm) (mArms) DxL (mm) (mArms) 4x7 4x7 7 7 4x7 4x7 8 8 4x7 4x7 4x7 12 10 10 5x7 4x7 4x7 20 15 15 4x7 6.3x7 4x7 4x7 15 30 20 23 4x7 15 4x7 6.3x7 4x7 5x7 20 35 24 30 4x7 20 4x7 4x7 5x7 6.3x7 25 30 40 50 4x7 30 4x7 4x7 4x7 5x7 6.3x7 35 35 40 55 70 5x7 50 4x7 4x7 5x7 6.3x7 8x7 35 40 45 55 75 100 6.3x7 70 4x7 5x7 5x7 8x7 40 50 60 70 110 6.3x7 85 5x7 6.3x7 6.3x7 70 80 105 120 8x7 145 6.3x7 8x7 8x7 120 140 185 205 8x7 170 205 85, 120Hz. NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. 87 CAT.No.2013/2014E Miniature Aluminum Electrolytic Capacitors Outline Drawing R2S PP/&8VH&DSDFLWRUV (R) MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS *5((1 &$3 Y& KRXUV $QWL FOHDQLQJ VROYHQW Diameters from 4 to 6.3mm and a height of 7mm. Guarantees 1000 hours at 105. R2S High temperature RC2 Marking color : White print on a black sleeve Specifications Performance -55 to 105 20 Less than 0.01CV or 3 whichever is larger (after 2 minutes) C : Rated capacitance (F); V : Rated voltage (V) Item Category temperature range () Tolerance at rated capacitance (%) Leakage current (A) Rated voltage (V) tan (max.) Tangent of loss angle (tan) 6.3 0.22 10 0.19 16 0.16 25 0.14 (20,120Hz) (20) 35 0.12 50 0.10 (20 C,120Hz) Rated voltage (V) -25/20 -40/20 Characteristics at high Impedance ratio (max.) and low temperature 6.3 3 8 10 3 5 16 2 4 25 2 3 35 2 3 50 2 3 (120Hz) 1000 hours The initial specified value or less Within 20% of initial value 200% or less of the initial specified value Test time Leakage current Percentage of capacitance change Tangent of the loss angle Endurance (105) (Applied ripple current) Shelf life (105) Test time : 1000 hours ; other items are the same as those for the endurance. Voltage application treatment : According to JIS C5101-1 Applicable standards JIS C5101-1, -4 1998 (IEC 60384-1 1992, -4 1985) Unit : mm Sleeve d0.05 copper clad steel wire (tinned) F0.5 D0.5max. Miniature Aluminum Electrolytic Capacitors Outline Drawing L max. 15min. Coefficient of Frequency for Rated Ripple Current Frequency (Hz) Rated voltage (V) 5060 120 1k 10k100k 6.3 to 16 25 to 35 50 0.68 0.48 0.45 0.72 0.63 0.50 0.92 0.80 0.70 1 1 1 Part numbering system (example : 25V33F) 5 min. R2S Series code D F d Casing symbol 4 1.5 0.45 1.0 D1 5 2.0 0.45 1.0 E1 25 Rated voltage symbol V 330 M F1 # Rated capacitance Capacitance Casing symbol tolerance symbol symbol Taping(Forming) symbol 6.3 2.5 0.45 1.0 F1 Standard Ratings Rated voltage (V) Rated capacitance (F) 0.33 0.47 1 2.2 3.3 4.7 10 22 33 47 100 Item 10 16 25 35 50 6.3 Rated ripple current Rated ripple current Rated ripple current Rated ripple current Rated ripple current Rated ripple current Case Case Case Case Case Case DxL (mm) (mArms) DxL (mm) (mArms) DxL (mm) (mArms) DxL (mm) (mArms) DxL (mm) (mArms) DxL (mm) (mArms) 4x7 10 4x7 12 4x7 16 4x7 25 4x7 21 4x7 23 4x7 28 4x7 25 4x7 25 5x7 48 4x7 39 5x7 47 5x7 48 6.3x7 75 4x7 42 4x7 49 5x7 54 6.3x7 87 6.3x7 90 5x7 53 5x7 60 6.3x7 83 6.3x7 90 5x7 64 6.3x7 95 6.3x7 95 6.3x7 96 (Note) Rated ripple current : 105, 100kHz. CAT.No.2013/2014E 88 NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. (R) MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS PP/%LSRODU&DSDFLWRUV RB2 $QWL *5((1 FOHDQLQJ &$3 VROYHQW Diameters from 4 to 6.3mm and a height of 7mm. Bipolar RB2 RC2 Marking color : White print on a blue sleeve Specifications Performance -40 to 85 20 Less than 0.03CV 3 (after 5 minutes) C : Rated capacitance (F) ; V : Rated voltage (V) Item Category temperature range () Tolerance at rated capacitance (%) Leakage current (A) Rated voltage (V) tan (max.) Tangent of loss angle (tan) 6.3 0.30 10 0.25 16 0.20 25 0.15 (20,120Hz) (20) 35 0.15 50 0.15 (20,120Hz) 1000 hours (with the polarity inverted every 250 hours) The initial specified value or less Within 20% of initial value 200% or less of the initial specified value Test time Leakage current Percentage of capacitance change Tangent of the loss angle Endurance (85) JIS C5101-1, -4 1998 (IEC 60384-1 1992, -4 1985) Applicable standards Outline Drawing Unit : mm Coefficient of Frequency for Rated Ripple Current Frequency (Hz) Sleeve Rated voltage (V) F0.5 6.3 to 16 25 to 35 50 L max. 15min. Casing symbol 4 1.5 0.45 1.0 D1 5 2.0 0.45 1.0 E1 120 1k 10k100k 0.8 0.8 0.8 1 1 1 1.1 1.5 1.6 1.2 1.7 1.9 Part numbering system (example: 16V47F) 5 min. RB2 Series code D F d 5060 16 Rated voltage symbol V 470 M F1 # Rated capacitance Capacitance Casing symbol tolerance symbol symbol Taping(Forming) symbol 6.3 2.5 0.45 1.0 F1 Standard Ratings Rated voltage (V) Item Rated capacitance (F) 0.22 0.33 0.47 1 2.2 3.3 4.7 10 22 33 47 6.3 10 16 25 35 50 Rated ripple current Rated ripple current Rated ripple current Rated ripple current Rated ripple current Rated ripple current Case Case Case Case Case Case DxL (mm) (mArms) DxL (mm) (mArms) DxL (mm) (mArms) DxL (mm) (mArms) DxL (mm) (mArms) DxL (mm) (mArms) 4x7 4 4x7 5 4x7 6 4x7 9 4x7 14 5x7 16 4x7 17 5x7 19 5x7 19 4x7 17 5x7 23 5x7 23 6.3x7 27 4x7 23 5x7 29 6.3x7 39 6.3x7 39 5x7 35 5x7 39 6.3x7 50 6.3x7 58 5x7 43 6.3x7 55 6.3x7 61 6.3x7 71 6.3x7 60 6.3x7 66 6.3x7 73 (Note) Rated ripple current : 85, 120Hz. NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. 89 CAT.No.2013/2014E Miniature Aluminum Electrolytic Capacitors D0.5max. d0.05 copper clad steel wire (tinned) RE3 6WDQGDUG&DSDFLWRUV (R) MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS *5((1 &$3 $QWL FOHDQLQJ VROYHQW 90D[ Guarantees 2000 hours at 85. RJ4 High temperature RE3 Marking color : White print on a blue sleeve Specifications Item Performance Category temperature range () 40 to 85 Tolerance at rated capacitance (%) 20 Leakage current (A) (20,120Hz) Rated voltage (V) 6.3 to 100 160 to 450 Leakage current (A) Less than 0.03CV or 4 whichever is larger (after 1 minute) Less than 0.01CV or 3 whichever is larger (after 2 minutes) CV1000 : Less than 0.1CV40 (after 1 minute) CV>1000 : Less than 0.04CV100 (after 1 minute) (20) C : Rated capacitance (F) V: Rated voltage (V) Tangent of loss angle (tan) Rated voltage (V) 6.3 10 16 25 35 50 63 100 160 200 250 315 350 400 450 tan (max.) 0.28 0.24 0.20 0.16 0.14 0.12 0.10 0.08 0.20 0.20 0.20 0.24 0.24 0.24 0.24 (20,120Hz) 0.02 is added to every 1000F increase over 1000F. Rated voltage (V) Characteristics at high and low temperature Impedance -25/20 ratio -40/20 (max.) 6.3 10 16 25 35 50 63 100 160 200 250 315 350 400 5 4 3 2 2 2 2 2 4 4 4 4 4 4 450 4 12 10 8 5 4 3 3 3 15 15 15 10 10 10 10 (120Hz) 2000 hours Test time Within 20% of initial value Percentage of capacitance change 200% or less of the initial specified value Tangent of the loss angle Shelf life (85) Test time : 1000 hours ; other items are the same as those for the endurance. Voltage application treatment Applicable standards JIS C5101-1, -4 1998 (IEC 60384-1 1992, -4 1985) Outline Drawing Unit : mm Coefficient of Frequency for Rated Ripple Current Rated voltage (V) Sleeve Vent (except 5) d0.05 copper clad steel wire (tinned) Frequency (Hz) CV (FxWV) All CV value 1000 1000< 1000 1000< All CV value 6.3 to 16 25 to 35 F0.5 D0.5max. Miniature Aluminum Electrolytic Capacitors The initial specified value or less Leakage current Endurance (85) (Applied ripple current) L max. 15min. 50 to 100 160 to 450 5060 120 1k 10k 100k 0.8 0.8 0.8 0.8 0.8 0.8 1 1 1 1 1 1 1.1 1.5 1.2 1.6 1.2 1.3 1.2 1.7 1.3 1.9 1.3 1.5 1.2 1.7 1.3 1.9 1.3 1.6 5 min. Part numbering system (example : 16V1000F) D F d 5 2.0 0.5 6.3 2.5 0.5 2.0 8 3.5 0.6 1.5 10 5.0 0.6 2.0 12.5 5.0 0.6 16 7.5 0.8 2.5 18 7.5 0.8 RE3 Series code 16 Rated voltage symbol V 102 M Rated capacitance Capacitance symbol tolerance symbol H4 # Casing symbol Optional symbol Taping(Forming) symbol Casing symbol Casing Casing Size Size DxL (mm) Symbol DxL (mm) Symbol 12.5x25 6 5x11 E3 16x25 J6 6.3x11 F3 16x31.5 J7 8x11.5 G3 16x35.5 J8 10x12.5 H3 18x35.5 K8 10x16 H4 18x40 K9 10x20 H5 12.5x20 5 CAT.No.2013/2014E 90 NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. (R) MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS RE3 Standard Ratings Rated voltage (V) 6.3 Item Case Rated capacitance (F) ESR 10 Rated ripple current Case ESR 16 Rated ripple current Case ESR 25 Rated ripple current Case ESR 35 Rated ripple current Case ESR 50 Rated ripple current Case DxL (mm) ESR 63 100 Rated ripple current Case (mArms) DxL (mm) () (mArms) 21 5x11 ESR Rated ripple current Case ESR Rated ripple current () (mArms) DxL (mm) () (mArms) DxL (mm) () (mArms) DxL (mm) () (mArms) DxL (mm) () (mArms) DxL (mm) () (mArms) 1 5x11 2.2 5x11 90.5 31 5x11 60.3 30 3.3 5x11 60.3 38 5x11 40.2 40 4.7 45 10 5x11 33.2 22 5x11 15.1 33 5x11 10.1 47 5x11 8.47 99 5x11 7.06 100 5x11 3.78 146 5x11 3.32 160 6.3x11 1.51 264 8x11.5 () 199 DxL (mm) 133 5x11 56.5 38 5x11 49.4 40 5x11 42.3 45 5x11 35.3 45 5x11 28.2 50 5x11 26.5 55 5x11 23.2 59 5x11 19.9 66 5x11 16.6 66 6.3x11 13.3 75 5x11 12.1 82 5x11 10.6 87 5x11 9.05 98 5x11 7.54 100 6.3x11 92 5x11 8.04 100 5x11 7.04 107 5x11 6.03 126 6.3x11 5.03 140 110 5x11 5.65 118 5x11 4.94 130 6.3x11 4.23 155 6.3x11 3.53 170 6.3x11 2.65 199 6.3x11 2.32 214 8x11.5 1.99 260 10x12.5 1.66 300 10x20 1.21 349 10x12.5 1.06 443 10x12.5 0.905 443 10x16 7.54 21 75 6.03 130 8x11.5 4.02 180 10x12.5 2.82 230 1.33 370 470 12.5x20 0.603 620 0.402 760 220 5x11 2.11 200 6.3x11 1.81 240 330 6.3x11 1.41 270 6.3x11 1.21 290 8x11.5 1.01 383 10x12.5 0.804 510 10x12.5 0.704 542 10x16 0.603 595 10x20 0.503 710 12.5x25 470 6.3x11 0.988 322 8x11.5 0.847 417 8x11.5 0.706 457 10x12.5 0.565 545 10x16 0.494 664 12.5x20 0.423 887 12.5x20 0.353 900 16x25 0.282 1000 10x12.5 0.398 791 0.166 0.133 1380 0.464 546 10x16 0.332 10x20 0.265 996 12.5x20 0.232 1210 12.5x25 0.199 1400 16x25 1300 18x40 2200 10x20 0.226 1010 10x20 0.196 1080 12.5x20 0.166 1350 12.5x25 0.136 1660 16x25 0.121 1950 16x35.5 0.106 2340 3300 10x20 0.161 1230 12.5x20 0.141 1430 12.5x25 0.121 1690 16x25 0.101 2030 16x35.5 0.09 2510 18x35.5 0.08 2810 4700 12.5x20 0.12 1710 12.5x25 0.106 1780 16x25 0.092 2100 16x31.5 0.078 2650 18x35.5 0.071 2990 6800 12.5x25 0.093 1930 16x25 0.083 2200 16x35.5 0.073 2580 18x35.5 0.063 3290 10000 16x25 0.076 2450 16x35.5 0.07 2700 18x35.5 0.063 3130 15000 16x35.5 0.062 2860 18x35.5 0.058 3100 22000 18x40 0.053 3340 ESR Rated ripple current Case ESR Rated ripple current Case ESR Rated ripple current Case ESR Rated ripple current Case ESR Rated ripple current Case ESR Rated ripple current Case ESR Rated ripple current () (mArms) DxL (mm) () (mArms) DxL (mm) () (mArms) DxL (mm) () (mArms) DxL (mm) () (mArms) DxL (mm) () (mArms) DxL (mm) () (mArms) 1000 8x11.5 Rated voltage (V) 160 Item Case Rated capacitance (F) 200 250 315 350 400 450 0.47 6.3x11 706 15 6.3x11 706 15 6.3x11 706 15 6.3x11 847 15 6.3x11 847 15 6.3x11 847 15 8x11.5 847 18 1 6.3x11 332 22 6.3x11 332 22 6.3x11 332 22 6.3x11 398 22 6.3x11 398 22 6.3x11 398 22 8x11.5 398 25 2.2 6.3x11 151 32 6.3x11 151 32 6.3x11 151 32 8x11.5 181 38 8x11.5 181 38 8x11.5 181 38 10x12.5 181 43 3.3 6.3x11 101 40 6.3x11 101 40 8x11.5 101 48 10x12.5 121 53 10x12.5 121 53 10x12.5 121 54 10x16 121 59 4.7 6.3x11 8x11.5 70.6 56 10x12.5 84.7 65 10x12.5 84.7 65 10x16 84.7 71 10x20 84.7 76 39.8 115 10x20 39.8 115 12.5x20 39.8 123 12.5x20 39.8 123 10 8x11.5 70.6 48 8x11.5 70.6 56 33.2 81 10x12.5 33.2 94 10x16 33.2 101 10x20 22 10x16 15.1 151 10x20 15.1 170 12.5x20 15.1 182 12.5x20 18.1 182 12.5x25 18.1 197 12.5x25 18.1 197 16x25 18.1 226 33 10x20 10.1 202 12.5x20 10.1 223 12.5x25 10.1 243 16x25 12.1 277 16x25 12.1 277 16x25 12.1 277 16x31.5 12.1 304 47 12.5x20 7.06 266 12.5x25 7.06 265 12.5x25 7.06 295 16x25 8.47 330 16x25 8.47 330 16x31.5 8.47 361 16x35.5 8.47 380 100 12.5x25 3.32 422 16x25 3.32 483 3.32 528 18x31.5 3.98 567 18x31.5 3.98 567 18x35.5 1.51 882 220 16x31.5 1.51 783 330 18x35.5 1.01 1080 16x31.5 (Note) ESR : 20, 120Hz ; Rated ripple current : 85, 120Hz NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. 91 CAT.No.2013/2014E Miniature Aluminum Electrolytic Capacitors DxL (mm) 650 R2B $QWL *5((1 FOHDQLQJ &$3 VROYHQW 6WDQGDUG%LSRODU&DSDFLWRUV (R) MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS Guarantees 2000 hours at 85. Bipolar R2B Marking color : White print on a blue sleeve Specifications Performance -40 to 85 20 Less than 0.03CV 3 (after 5 minutes) C : Rated capacitance (F) ; V : Rated voltage (V) Item Category temperature range () Tolerance at rated capacitance (%) Leakage current (A) Rated voltage (V) tan (max.) Tangent of loss angle (tan) 6.3 0.24 10 0.24 16 0.20 25 0.20 35 0.16 (20,120Hz) (20) 50 0.14 63 0.12 100 0.10 (20,120Hz) 0.02 is added to every 1000F increase over 1000F Rated voltage (V) Impedance ratio -25/20 -40/20 (max.) Characteristics at high and low temperature 6.3 4 10 10 3 8 16 2 6 25 2 4 35 2 3 50 2 3 63 2 3 100 2 3 (120Hz) 0.5 for -25, 1 for -40 are added to every 1000F increase over 1000F 2000 hours (with the polarity inverted every 250 hours) The initial specified value or less Within 20% of initial value 150% or less of the initial specified value Test time Leakage current Percentage of capacitance change Tangent of the loss angle Endurance (85) (Applied ripple current) Shelf life (85) Applicable standards Test time : 1000 hours. Other have same as endurance. Voltage application treatment JIS C5101-1, -4 1998 (IEC 60384-1 1992, -4 1985) Outline Drawing Coefficient of Frequency for Rated Ripple Current Unit : mm Sleeve 5060 120 1k 10k100k 6.3 to 16 25 to 35 50 to 100 0.8 0.8 0.8 1 1 1 1.1 1.5 1.6 1.2 1.7 1.9 d0.05 copper clad steel wire (tinned) F0.5 D0.5max. Miniature Aluminum Electrolytic Capacitors Vent (except 5) Frequency (Hz) Rated voltage (V) 15min. L max. Part numbering system (example : 10V1000F) 5 min. R2B Series code D F d 5 2.0 0.5 6.3 2.5 0.5 8 3.5 0.6 10 5.0 0.6 12.5 16 18 5.0 7.5 7.5 0.6 0.8 0.8 2.0 (10,16L or less : 1.5) 1.5 V 10 Rated voltage symbol 102 5 # M Taping(Forming) symbol Rated capacitance Capacitance Casing symbol tolerance symbol symbol Casing symbol Casing Symbol E3 F3 G3 Case DxL (mm) 5x11 6.3x11 8x11.5 Case DxL (mm) 10x12.5 10x16 10x20 Casing Symbol H3 H4 H5 Casing Symbol 5 6 J6 Case DxL (mm) 12.5x20 12.5x25 16x25 Case DxL (mm) 16x31.5 16x35.5 18x35.5 Casing Symbol J7 J8 K8 Standard Ratings 6.3 Rated voltage (V) Rated capacitance (F) Item Case DxL (mm) 10 Rated ripple current Case 16 Rated ripple current Case 25 Rated ripple current Case 35 Rated ripple current 50 Rated ripple current Case Case 63 Rated ripple current Case 100 Rated ripple current Case Rated ripple current (mArms) DxL (mm) (mArms) DxL (mm) (mArms) DxL (mm) (mArms) DxL (mm) (mArms) DxL (mm) (mArms) DxL (mm) (mArms) DxL (mm) (mArms) 0.47 5x11 10 5x11 11 1 5x11 14 5x11 16 2.2 5x11 21 5x11 23 5x11 24 3.3 5x11 26 5x11 28 6.3x11 34 4.7 6.3x11 41 10 22 5x11 52 5x11 28 5x11 28 5x11 31 5x11 34 6.3x11 57 5x11 39 5x11 40 5x11 42 5x11 45 5x11 58 5x11 60 6.3x11 71 6.3x11 77 8x11.5 6.3x11 89 8x11.5 70 10x16 136 181 33 5x11 58 5x11 63 5x11 71 6.3x11 84 87 8x11.5 111 10x12.5 144 10x20 47 5x11 69 5x11 75 6.3x11 97 6.3x11 100 8x11.5 122 10x12.5 157 10x16 188 12.5x20 248 100 6.3x11 115 6.3x11 126 8x11.5 167 10x12.5 204 10x12.5 212 10x20 273 12.5x20 343 16x25 458 18x35.5 837 220 8x11.5 202 8x11.5 221 10x12.5 294 10x16 332 10x20 375 12.5x25 506 16x25 645 330 8x11.5 247 10x12.5 322 10x16 394 10x20 444 12.5x20 526 12.5x25 620 470 10x12.5 350 10x16 420 10x20 513 12.5x20 607 12.5x25 685 16x25 861 1000 10x20 611 12.5x20 767 12.5x25 935 16x25 1120 1270 2200 12.5x25 1090 16x25 1380 1660 3300 16x25 1490 16x31.5 1760 4700 16x31.5 1880 18x35.5 2280 16x31.5 16x31.5 (Note) Rated ripple current : 85, 120Hz CAT.No.2013/2014E 92 NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. (R) MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS &%LSRODU&DSDFLWRUV RJP $QWL *5((1 FOHDQLQJ &$3 VROYHQW Guarantees 2000 hours at 105. RJP High temperature R2B Marking color : White print on a black sleeve Specifications Performance -40 to 105 20 Less than 0.03CV 3 (after 5 minutes) C : Rated capacitance (F) ; V : Rated voltage (V) Item Category temperature range () Tolerance at rated capacitance (%) Leakage current (A) Rated voltage (V) tan (max.) Tangent of loss angle (tan) 6.3 0.4 10 0.3 16 0.2 (20,120Hz) (20) 25 0.2 35 0.16 50 0.14 (20,120Hz) 0.02 is added to every 1000F increase over 1000F Rated voltage (V) Impedance ratio -25/20 -40/20 (max.) Characteristics at high and low temperature 6.3 5 10 10 4 8 16 3 6 25 2 4 35 2 3 50 2 3 (120Hz) 0.5 for -25, 1 for -40 are added to every 1000F increase over 1000F 2000 hours (with the polarity inverted every 250 hours) The initial specified value or less Within 20% of initial value 200% or less of the initial specified value Test time Leakage current Percentage of capacitance change Tangent of the loss angle Endurance (105) (Applied ripple current) Shelf life (105) Applicable standards Test time : 1000 hours. Other have same as endurance. Voltage application treatment JIS C5101-1, -4 1998 (IEC 60384-1 1992, -4 1985) Outline Drawing Unit : mm Sleeve Frequency (Hz) Rated voltage (V) 5060 120 1k 10k100k 6.3 to 16 25 to 35 50 0.8 0.8 0.8 1 1 1 1.1 1.5 1.6 1.2 1.7 1.9 F0.5 D0.5max. d0.05 copper clad steel wire (tinned) 15min. L max. Part numbering system (example : 10V1000F) 5 min. RJP Series code D F d 5 2.0 0.5 6.3 2.5 0.5 8 3.5 0.6 10 5.0 0.6 12.5 16 18 5.0 7.5 7.5 0.6 0.8 0.8 2.0 (10,16L or less : 1.5) 1.5 10 V Rated voltage symbol 102 M 5 # Taping(Forming) symbol Rated capacitance Capacitance Casing symbol tolerance symbol symbol Casing symbol Case DxL (mm) 5x11 6.3x11 8x11.5 Casing Symbol E3 F3 G3 Case DxL (mm) 10x12.5 10x16 10x20 Casing Symbol H3 H4 H5 Case DxL (mm) 12.5x20 12.5x25 16x25 Casing Symbol 5 J6 Case DxL (mm) 16x31.5 18x35.5 Casing Symbol J7 K8 Standard Ratings Rated voltage (V) Rated capacitance (F) Item 6.3 10 16 25 35 50 Rated ripple Rated ripple Rated ripple Rated ripple Rated ripple Rated ripple Case Case Case Case Case Case current current current current current current DxLmmmArms DxLmmmArms DxLmmmArms DxLmmmArms DxLmmmArms DxLmmmArms 1 5x11 12 2.2 5x11 18 3.3 5x11 22 4.7 5x11 25 5x11 22 10 5x11 30 5x11 34 5x11 30 6.3x11 22 5x11 42 5x11 40 6.3x11 55 6.3x11 51 33 5x11 46 5x11 45 5x11 49 6.3x11 56 8x11.5 72 8x11.5 77 47 5x11 54 5x11 54 6.3x11 67 6.3x11 67 8x11.5 86 10x12.5 105 100 6.3x11 90 6.3x11 220 8x11.5 150 8x11.5 96 8x11.5 110 150 10x12.5 195 10x16 8x11.5 8x11.5 37 63 110 10x16 160 10x20 190 215 12.5x20 290 12.5x25 340 330 8x11.5 185 10x16 240 10x16 265 12.5x20 320 12.5x20 350 16x25 460 470 10x12.5 260 10x16 290 10x20 345 12.5x20 380 12.5x25 465 16x31.5 590 1000 10x20 460 12.5x20 510 12.5x25 605 16x25 670 2200 12.5x25 820 16x25 910 16x31.5 1070 3300 16x25 1110 16x31.5 1200 18x35.5 1400 4700 16x31.5 1430 18x35.5 1520 6800 18x35.5 1830 18x35.5 16x31.5 805 1140 (Note) Rated ripple current : 105 , 120Hz NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. 93 CAT.No.2013/2014E Miniature Aluminum Electrolytic Capacitors Vent (except 5) Coefficient of Frequency for Rated Ripple Current RJ5 &0LQLDWXUH&DSDFLWRUV (R) MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS *5((1 &$3 Y& KRXUV $QWL FOHDQLQJ VROYHQW Case size is one rank smaller than Series RJ4. Miniaturized RJ5 RJ4 Marking color : White print on a black sleeve Specifications Performance Item Category temperature range () -55105 Rated voltage (V) 6.3100 Tolerance at rated capacitance (%) 20 -40105 160450 Less than 0.03CV or 4 whichever is larger (after 1 minute) Less than 0.01CV or 3 whichever is larger (after 2 minutes) Leakage current (A) 20120Hz 20 20120Hz CV1000Less than 0.1CV40 (after 1 minute) CV>1000Less than 0.04CV100 (after 1 minute) 20 20 C : Rated capacitance (F) V: Rated voltage (V) Tangent of loss angle (tan) Rated voltage (V) 6.3 10 16 25 35 50 63 100 Rated voltage (V) 160 200 250 315 350 400 450 tan max. 0.34 0.26 0.20 0.16 0.14 0.12 0.10 0.08 tan max. 0.20 0.20 0.20 0.24 0.24 0.24 0.24 0.02 is added to every 1000F increase over 1000F. Rated voltage (V) 6.3 10 16 25 35 50 4 3 2 2 2 2 2 8 6 4 3 3 3 3 Impedance -25/20 5 ratio (max.) -40/20 10 Characteristics at high and low temperature 20120Hz 20120Hz Rated voltage (V) 160 to 250 Impedance -25/20 ratio -40/20 (max.) 4 4 15 10 63 100 315 to 450 120Hz 120Hz 2000 hours (5 to 8, 100V or less : 1000 hours) Test time The initial specified value or less Leakage current Endurance (105) (Applied ripple current) Within 20% of initial value Percentage of capacitance change 200% or less of the initial specified value Tangent of the loss angle Test time : 1000 hours ; other items are the same as those for the endurance. Voltage application treatment JIS C5101-1, -4 1998 (IEC 60384-1 1992, -4 1985) Outline Drawing Unit : mm Coefficient of Frequency for Rated Ripple Current Rated voltage (V) Rated Vent (except 5) Sleeve 6.3 to 100 F0.5 Lmax. 15min. 160 to 450 5 min. 5 2.0 0.5 6.3 2.5 0.5 100V : 1.5 160V : 2.0 8 3.5 0.6 10 5.0 0.6 1.5 100V 12.5, 16L : 1.5 100V 20L or 160 : 2.0 0.1 100 330 2200 0.47 to to to to to 47 220 1000 22000 470 5060 120 1k 10k 100k 0.8 0.8 0.8 0.8 0.8 1 1 1 1 1 1.5 1.2 1.2 1.1 1.3 1.7 1.3 1.2 1.1 1.4 2.0 1.4 1.3 1.1 1.6 Part numbering system (example : 10V1000F) RJ5 D F d Frequency (Hz) capacitance (F) d0.05 copper clad steel wire (tinned) D0.5max Miniature Aluminum Electrolytic Capacitors Shelf life (105) Applicable standards 12.5 5.0 0.6 16 7.5 0.8 18 7.5 0.8 Series code 10 Rated voltage symbol V 102 M Rated capacitance Capacitance symbol tolerance symbol H3 # Casing symbol Optional symbol Taping(Forming) symbol In 160V, should put input optional symbol B . "B". In the the case caseof of beyond 160V and beyond, should in optional symbol 100V : 2.0 160V : 2.5 Casing symbol Size Size Size Size Casing Casing Casing Casing DxLmm Symbol DxLmm Symbol DxLmm Symbol DxLmm Symbol K5 18x20 16x20 J5 10x12.5 H3 5x11 E3 16x25 J6 10x16 H4 6.3x11 F3 K6 18x25 16x31.5 J7 10x20 H5 8x11.5 G3 K7 18x31.5 K8 18x35.5 12.5x20 5 16x35.5 J8 12.5x25 6 K9 18x40 CAT.No.2013/2014E 94 NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. (R) MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS RJ5 Standard Ratings Rated voltage (V) Item Rated capacitance (F) 6.3 10 Rated ripple current Case DxL (mm) 16 Rated ripple current Case 25 Rated ripple current Case 35 Rated ripple current Case 50 Rated ripple current Case 63 Rated ripple current Case 100 Rated ripple current Case Case Rated ripple current mArms DxL (mm) mArms DxL (mm) mArms DxL (mm) mArms DxL (mm) mArms DxL (mm) mArms DxL (mm) mArms DxL (mm) mArms 1 5x11 15 5x11 15 2.2 5x11 22 5x11 21 3.3 5x11 27 5x11 29 4.7 5x11 32 5x11 32 10 5x11 47 5x11 50 22 5x11 70 5x11 71 33 5x11 90 6.3x11 100 47 5x11 93 6.3x11 115 6.3x11 68 6.3x11 110 6.3x11 150 8x11.5 100 5x11 125 6.3x11 151 8x11.5 190 8x11.5 220 5x11 155 6.3x11 190 6.3x11 200 8x11.5 270 10x12.5 314 330 6.3x11 210 6.3x11 225 8x11.5 310 10x12.5 384 10x16 470 6.3x11 250 8x11.5 323 10x12.5 429 10x16 470 130 120 8x11.5 140 155 10x12.5 190 200 10x16 240 10x16 335 12.5x20 390 421 10x20 510 10x20 540 12.5x20 640 16x25 715 12.5x25 930 18x35.5 960 398 10x12.5 460 10x12.5 500 10x16 610 12.5x20 857 1000 16x25 10x16 635 10x16 705 10x20 710 12.5x25 1180 16x25 1380 16x31.5 1410 18x35.5 3300 10x20 882 12.5x20 1010 12.5x25 1200 16x25 1440 16x31.5 1500 18x35.5 1990 4700 12.5x20 1120 12.5x25 1260 16x25 1500 16x25 1570 16x35.5 1780 6800 12.5x25 1380 16x25 1570 16x25 1600 16x35.5 1850 18x40 2000 10000 16x25 1750 16x31.5 1820 16x35.5 1930 18x40 2000 15000 16x31.5 1820 16x35.5 2050 18x40 2210 22000 18x35.5 2280 18x40 2420 Rated ripple current Case Rated ripple current Case Rated ripple current Case 8x11.5 Rated voltage (V) Item 200 250 6.3x11 3.3 6.3x11 4.7 6.3x11 33 47 68 100 6.3x11 10x12.5 10x16 10x20 12.5x25 16x20 61 125 170 8x11.5 10x16 10x20 220 330 12.5x20 6.3x11 35 42 6.3x11 42 72 8x11.5 72 10x16 135 10x20 150 12.5x20 210 135 185 305 12.5x20 16x20 250 355 Rated ripple current Case Rated ripple current Case Rated ripple current Case 350 400 21 6.3x11 450 Rated ripple current 26 6.3x11 35 8x11.5 21 8x11.5 10x12.5 41 35 10x12.5 49 26 35 10x16 67 10x16 67 10x20 86 12.5x20 135 12.5x20 140 12.5x20 140 12.5x25 170 12.5x25 195 12.5x25 195 16x20 225 16x25 296 18x20 16x31.5 460 16x31.5 390 18x25 380 18x25 380 18x31.5 505 18x35.5 540 18x35.5 588 18x40 615 18x40 688 430 18x20 465 18x25 460 18x25 460 16x31.5 560 18x31.5 560 18x31.5 560 18x35.5 648 16x25 570 16x31.5 625 16x35.5 655 18x20 570 18x25 615 18x25 615 18x25 675 18x31.5 735 18x35.5 855 16x31.5 685 18x25 675 16x35.5 790 18x31.5 810 745 286 350 16x20 510 350 390 430 510 16x25 18x20 16x31.5 500 16x25 240 18x20 16x35.5 18x20 195 16x20 350 500 510 12.5x25 16x35.5 510 12 20 74 465 16x25 8x11.5 6.3x11 10x16 16x25 18x20 18x25 8x11.5 400 150 220 12.5x25 120 180 DxLmm mArms DxLmm mArms DxLmm mArms DxLmm mArms DxLmm mArms DxLmm mArms DxLmm mArms 1 22 1650 315 2.2 10 18x35.5 648 18x40 688 18x40 750 330 18x40 1090 470 18x40 1300 (Note) Rated ripple current : 105 , 120Hz NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. 95 CAT.No.2013/2014E Miniature Aluminum Electrolytic Capacitors Rated capacitance (F) 160 Case 93 8x11.5 2200 1000 6.3x11 RJ4 &0LQLDWXUH&DSDFLWRUV (R) MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS *5((1 &$3 Y& KRXUV $QWL FOHDQLQJ VROYHQW 90D[ Case size is one rank smaller than Series RJ3. Guarantees 2000 hours at 105. (5 to 8 : 1000 hours) Miniaturized RJ4 RJ3 High temperature Marking color : White print on a black sleeve RE3 Specifications Performance Item -55 to 105 Category temperature range () -40 to 105 6.3 to 100 Rated voltage (V) 160 to 450 20 Tolerance at rated capacitance (%) Less than 0.03CV or 4 whichever is larger (after 1 minute) Less than 0.01CV or 3 whichever is larger (after 2 minutes) Leakage current (A) 20 (20,120Hz) (20,120Hz) CV1000 : Less than 0.1CV40 (after 1 minute) CV>1000 : Less than 0.04CV100 (after 1 minute) (20) (20) C: Rated capacitance (F) V : Rated voltage (V) Tangent of loss angle (tan) Rated voltage (V) 6.3 10 16 25 35 50 63 100 Rated voltage (V) 160 200 250 315 350 400 450 tan (max.) 0.28 0.24 0.20 0.16 0.14 0.12 0.10 0.08 tan (max.) 0.20 0.20 0.20 0.24 0.24 0.24 0.24 0.02 is added to every 1000F increase over 1000F Rated voltage (V) Characteristics at high and low temperature (20,120Hz) 6.3 10 16 25 35 50 63 100 Impedance -25/20 5 ratio (max.) -40/20 10 4 3 2 2 2 2 2 8 6 4 3 3 3 3 (20,120Hz) Rated voltage (V) 160 to 250 Impedance -25/20 ratio (max.) -40/20 315 to 450 4 4 15 10 (120Hz) Test time 2000 hours (5 to 8 : 1000 hours) Leakage current Endurance (105) (Applied ripple current) The initial specified value or less Within 20% of initial value Tangent of the loss angle 200% or less of the initial specified value Test time : 1000 hours ; other items are the same as those for the endurance. Voltage application treatment JIS C5101-1, -4 1998 (IEC 60384-1 1992, -4 1985) Applicable standards Outline Drawing Unit : mm Coefficient of Frequency for Rated Ripple Current Rated voltage (V) Rated Vent (except 5) Sleeve F0.5 15min. 160 to 450 5 min. 5 2.0 0.5 6.3 2.5 0.5 2.0 8 3.5 0.6 1.5 10 5.0 0.6 2.0 12.5 5.0 0.6 120 1k 10k 100k 0.8 0.8 0.8 0.8 0.8 1 1 1 1 1 1.5 1.2 1.2 1.1 1.3 1.7 1.3 1.2 1.1 1.4 2.0 1.4 1.3 1.1 1.6 Part numbering system (example : 16V2200F) RJ4 D F d 5060 0.1 to 47 100 to 220 330 to 1000 2200 to 22000 0.47 to 330 6.3 to 100 L max. Frequency (Hz) capacitance (F) d0.05 copper clad steel wire (tinned) D0.5max. Miniature Aluminum Electrolytic Capacitors Percentage of capacitance change Shelf life (105) (120Hz) 16 7.5 0.8 2.5 18 7.5 0.8 Series code 16 Rated voltage symbol V 222 M Rated capacitance Capacitance symbol tolerance symbol 5 # Casing symbol Optional symbol Taping(Forming) symbol Casing symbol Size DxL (mm) 5x11 6.3x11 8x11.5 10x12.5 10x16 10x20 12.5x20 Size Casing Casing Symbol DxL (mm) Symbol 12.5x25 6 E3 16x25 J6 F3 16x31.5 J7 G3 16x35.5 J8 H3 18x31.5 K7 H4 18x35.5 K8 H5 18x40 K9 5 CAT.No.2013/2014E 96 NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. (R) MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS RJ4 Standard Ratings Rated voltage (V) 6.3 Item Case Rated capacitance (F) ESR 10 Rated ripple current Case ESR 16 Rated ripple current Case ESR 25 Rated ripple current Case ESR 35 Rated ripple current Case ESR 50 Rated ripple current Case DxL (mm) () 1 5x11 2.2 5x11 3.3 4.7 5x11 56.5 27 5x11 49.4 10 5x11 33.2 37 5x11 26.5 39 5x11 22 5x11 15.1 54 5x11 12.1 58 5x11 33 5x11 10.1 67 5x11 8.04 71 5x11 7.04 (mArms) DxL (mm) () (mArms) DxL (mm) () (mArms) DxL (mm) () (mArms) DxL (mm) () (mArms) DxL (mm) ESR () 63 Rated ripple current Case (mArms) DxL (mm) ESR () 100 Rated ripple current Case (mArms) DxL (mm) ESR Rated ripple current () (mArms) 15 5x11 90.5 22 5x11 60.3 21 5x11 60.3 27 5x11 40.2 29 30 5x11 42.4 32 5x11 28.2 32 23.2 43 5x11 19.9 47 5x11 16.6 46 6.3x11 13.3 54 10.6 64 5x11 9.05 70 5x11 7.54 71 6.3x11 78 5x11 6.03 90 6.3x11 5.03 100 6.3x11 6.3x11 199 133 15 6.03 93 8x11.5 4.02 130 47 5x11 8.47 72 5x11 7.06 79 5x11 5.65 84 5x11 4.94 90 4.24 115 3.53 120 10x12.5 2.82 165 100 5x11 3.98 105 5x11 3.32 115 6.3x11 2.65 141 6.3x11 2.32 151 8x11.5 1.99 190 10x12.5 1.66 215 10x20 1.33 265 220 5x11 2.11 140 6.3x11 1.81 166 6.3x11 1.51 190 8x11.5 1.21 247 10x12.5 1.06 314 10x12.5 0.91 314 10x16 0.75 335 12.5x25 0.60 440 330 6.3x11 1.41 195 6.3x11 1.21 210 8x11.5 1.01 271 10x12.5 0.81 360 10x12.5 0.70 384 10x16 0.60 421 10x20 0.50 510 12.5x25 0.40 540 470 6.3x11 0.99 232 8x11.5 0.85 325 8x11.5 0.71 323 10x12.5 0.57 429 10x16 0.50 470 12.5x20 0.42 628 12.5x20 0.35 640 16x25 0.28 715 0.47 398 10x12.5 0.40 457 10x16 0.33 560 10x20 0.27 705 12.5x20 0.23 857 12.5x25 0.20 1000 16x25 0.17 930 18x40 0.13 985 961 12.5x25 0.14 1180 16x25 0.12 1380 16x35.5 0.11 1660 18x35.5 0.08 1990 1000 8x11.5 2200 10x20 0.23 720 10x20 0.20 761 12.5x20 0.17 3300 10x20 0.16 882 12.5x20 0.14 1010 12.5x25 0.12 1200 16x25 0.10 1440 16x35.5 0.09 1780 4700 12.5x20 0.12 1120 12.5x25 0.11 1250 16x25 0.09 1490 16x31.5 0.08 1880 18x35.5 0.07 2120 6800 12.5x25 0.09 1380 16x25 0.08 1570 16x35.5 0.07 1830 18x35.5 0.06 2330 10000 16x25 0.07 1750 16x35.5 0.07 1910 18x35.5 0.06 2220 15000 16x35.5 0.06 2040 18x35.5 0.06 2190 22000 18x40 0.05 2390 Rated ripple current Case Rated ripple current Case Rated ripple current Case Rated ripple current Case Rated ripple current Case Rated ripple current Case Rated voltage (V) 160 Item Case ESR 200 ESR 250 ESR 315 ESR 350 ESR 400 ESR 450 ESR Rated ripple current () (mArms) DxL (mm) 0.47 6.3x11 706 11 6.3x11 706 11 6.3x11 706 11 6.3x11 847 11 6.3x11 847 11 6.3x11 847 11 8x11.5 847 1 6.3x11 332 16 6.3x11 332 16 6.3x11 332 16 6.3x11 398 16 6.3x11 398 16 6.3x11 398 16 8x11.5 398 18 2.2 6.3x11 151 23 6.3x11 151 23 6.3x11 151 23 8x11.5 181 27 8x11.5 181 27 8x11.5 181 27 10x12.5 181 31 3.3 6.3x11 101 28 6.3x11 101 101 121 121 121 121 42 4.7 6.3x11 () DxL (mArms) (mm) () DxL (mArms) (mm) () DxL (mArms) (mm) () DxL (mArms) (mm) 28 8x11.5 70.6 34 8x11.5 70.6 40 8x11.5 33.2 58 10x12.5 33.2 66 10x16 15.1 107 10x20 15.1 33 10x20 10.1 143 12.5x20 10.1 47 12.5x20 7.06 188 12.5x20 7.06 100 12.5x25 3.32 299 16x25 3.32 342 18x35.5 1.51 624 10 22 8x11.5 220 16x31.5 1.51 554 330 18x35.5 1.01 764 () DxL (mArms) (mm) () DxL (mArms) (mm) 13 34 10x12.5 38 10x12.5 38 10x12.5 38 10x16 70.6 40 10x12.5 84.7 45 10x12.5 84.7 45 10x16 84.7 50 10x20 84.7 10x16 33.2 74 10x20 39.8 79 10x20 39.8 79 12.5x20 39.8 87 12.5x20 39.8 87 120 12.5x20 15.1 130 12.5x20 18.1 129 12.5x25 18.1 140 12.5x25 18.1 140 16x25 18.1 160 160 12.5x25 10.1 12.1 12.1 12.1 196 16x31.5 12.1 215 188 12.5x25 256 16x35.5 16x31.5 54 172 16x25 196 16x25 196 16x25 7.06 205 16x25 8.47 234 16x25 8.47 234 16x31.5 3.32 374 18x31.5 3.98 401 18x31.5 3.98 401 8.47 8.47 269 (Note) ESR : 20, 120Hz ; Rated ripple current : 105, 120Hz NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. 97 CAT.No.2013/2014E Miniature Aluminum Electrolytic Capacitors Rated capacitance (F) RJ3 *5((1 &$3 &8VH6WDQGDUG&DSDFLWRUV (R) MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS $QWL FOHDQLQJ VROYHQW 90D[ Y& KRXUV Guarantees 2000 hours at 105 (58 : 1000 hours). Miniaturized Miniaturized RJ4 RJ3 RJJ High temperature Marking color : White print on a black sleeve RE3 Specifications Performance Item Category temperature range () -55 to 105 Rated voltage (V) 6.3 to 100 Tolerance at rated capacitance (%) 20 -40 to 105 160 to 450 20 (20 C,120Hz) Less than 0.01CV or 3 whichever is larger (after 2 minutes) Leakage current (A) (20 C,120Hz) CV1000 : Less than 0.1CV40 (after 1 minute) CV1000 : Less than 0.04CV100 (after 1 minute) (20 C) (20 C) C : Rated capacitance (F) V : Rated voltage (V) Tangent of loss angle (tan) Rated voltage (V) 6.3 10 16 25 35 50 63 100 Rated voltage (V) 160 200 250 315 350 400 tan (max.) 0.22 0.19 0.16 0.14 0.12 0.10 0.09 0.08 tan (max.) 0.15 0.15 0.15 0.20 0.20 0.20 0.02 is added to every 1000F increase over 1000F Rated voltage (V) Characteristics at high and low temperature 6.3 Impedance Z-25/Z20 5 ratio Z-55/Z20 10 (max.) (20 C,120Hz) (20 C,120Hz) 10 16 25 35 50 63 100 Rated voltage (V) 160 to 250 315 to 400 4 3 2 2 2 2 2 3 3 8 6 4 3 3 3 3 Impedance Z-25/Z20 ratio Z-40/Z20 (max.) 8 6 (120Hz) (120Hz) Test time 2000 hours (5 to 8 : 1000 hours) The initial specified value or less Percentage of capacitance change Within 20% of initial value 200% or less of the initial specified value Tangent of the loss angle Shelf life (105) Test time : 1000 hours; other items are the same as those for the endurance. Voltage application treatment Applicable standards JIS C5101-1, -4 1998 (IEC 60384-1 1992, -4 1985) 2XWOLQH'UDZLQJ Unit : mm Coefficient of Frequency for Rated Ripple Current Frequency (Hz) Rated voltage (V) Rated capacitance (F) Sleeve Vent (except5) d0.05 copper clad steel wire (tinned) 0.1 10 100 330 2200 0.47 6.3 to 100 F0.5 D0.5max. Miniature Aluminum Electrolytic Capacitors Leakage current Endurance (105) (Applied ripple current) 15min L max. 160 to 400 to to to to to to 4.7 47 220 1000 15000 220 5060 120 1k 10k 100k 0.8 0.4 0.5 0.7 0.8 0.9 1 0.7 0.8 0.9 0.9 1.0 1.3 0.8 0.9 0.9 1.0 1 1.4 1 1 1 1 1 1.6 5 min. Part numbering system (example : 63V1000F) D F d 5 2.0 0.5 6.3 2.5 0.5 2.0 8 3.5 0.6 1.5 10 5.0 0.6 2.0 12.5 5.0 0.6 16 7.5 0.8 2.5 18 7.5 0.8 RJ3 Series code 63 Rated voltage symbol V 102 M Rated capacitance Capacitance symbol tolerance symbol J7 # Casing symbol Optional symbol Taping(Forming) symbol Casing symbol Size Size Casing Casing DxL (mm) Symbol DxL (mm) Symbol 5x11 6 E3 12.5x25 6.3x11 J6 F3 16x25 8x11.5 J7 G3 16x31.5 10x12.5 J8 H3 16x35.5 10x16 K8 H4 18x35.5 10x20 K9 H5 18x40 12.5x20 5 CAT.No.2013/2014E 98 NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. (R) MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS RJ3 Standard Ratings Rated voltage (V) Item Rated Capacitance (F) 4.7 10 6.3 10 Impedance Rated ripple 16 ESR DxL (mm) () 14.3 22 33 5x11 11.1 Case Impedance Rated ripple Case current ESR ( max.) (mArms) DxL (mm) current Case ( max.) (mArms) DxL (mm) () ESR () 25 Impedance Rated ripple ESR Case current ( max.) (mArms) DxL (mm) 5x11 26.5 2.5 12.1 92 Impedance Rated ripple current ( max.) (mArms) () 5x11 49.4 3.0 85 5x11 23.2 2.5 92 10.6 5x11 2.5 92 5x11 1.9 105 5x11 1.9 105 2.5 105 5x11 9.55 1.9 105 5x11 8.04 1.5 120 5x11 7.04 1.5 120 130 47 5x11 7.77 1.5 120 5x11 6.71 1.5 120 5x11 5.65 1.2 130 5x11 4.94 1.2 100 5x11 3.65 1.2 130 5x11 3.15 1.2 130 6.3x11 2.65 0.58 220 6.3x11 2.32 0.58 220 220 6.3x11 1.66 0.87 180 6.3x11 1.43 0.58 220 8x11.5 1.21 0.47 290 8x11.5 1.06 0.39 315 330 6.3x11 500 1.11 0.58 220 8x11.5 0.96 0.47 265 8x11.5 0.81 0.39 315 10x12.5 0.70 0.23 470 8x11.5 0.78 0.39 315 8x11.5 0.67 0.39 315 10x12.5 0.57 0.23 500 10x16 0.50 0.18 1000 10x12.5 0.37 0.23 500 10x16 0.32 0.18 615 10x20 0.27 0.12 825 12.5x20 0.23 0.090 1050 615 2200 12.5x20 0.18 0.095 1000 12.5x20 0.16 0.090 1050 12.5x25 0.14 0.068 1300 16x25 0.12 0.056 1740 3300 12.5x20 0.13 0.090 1050 12.5x25 0.12 0.068 1300 16x25 0.10 0.056 1740 16x31.5 0.09 0.045 2110 4700 16x25 0.10 0.061 1670 16x25 0.09 0.056 1740 16x31.5 0.08 0.045 2110 18x35.5 0.07 0.036 2580 6800 16x25 0.08 0.056 1740 16x31.5 0.07 0.045 2110 18x35.5 0.06 0.036 2580 10000 16x31.5 0.06 0.045 2110 18x35.5 0.06 0.036 2580 15000 18x35.5 0.05 0.036 2580 Case ESR Case ESR Case ESR Impedance Rated ripple current Rated voltage (V) Item Rated Capacitance (F) 35 Case ESR 50 Impedance Rated ripple current ( max.) (mArms) DxL (mm) () 5x11 2.2 5x11 3.3 4.7 5x11 42.4 2.5 10 5x11 19.9 22 5x11 33 5x11 47 6.3x11 current ( max.) (mArms) DxL (mm) () () 100 Impedance Rated ripple current ( max.) (mArms) DxL (mm) ( max.) (mArms) () 4.9 35 5x11 75.4 4.2 53 5x11 60.3 9.2 60 5x11 50.3 3.9 65 5x11 40.2 7.2 67 92 5x11 35.3 3.6 82 5x11 31.8 5.8 74 5x11 28.2 6.3 75 1.9 105 5x11 16.6 2.7 100 5x11 14.9 3.6 95 6.3x11 13.3 3.3 110 9.05 1.5 120 5x11 7.54 1.9 125 6.3x11 6.79 2.1 130 8x11.5 6.03 1.4 165 6.03 1.2 130 6.3x11 5.03 1.1 195 6.3x11 4.52 1.7 160 10x12.5 4.02 0.94 305 4.24 0.58 220 6.3x11 3.53 0.90 245 3.18 1.2 305 10x16 2.82 0.68 320 100 8x11.5 1.99 0.39 315 220 10x12.5 0.91 0.23 500 166 8x11.5 10x16 8x11.5 133 11 45 1.66 0.50 385 10x12.5 1.49 0.65 395 12.5x20 1.33 0.28 585 0.75 0.27 505 10x20 0.68 0.32 505 16x25 0.60 0.16 1120 330 10x16 0.60 0.18 615 10x20 0.50 0.18 675 12.5x20 0.45 0.22 660 16x25 0.40 0.13 1290 470 10x20 0.42 0.12 825 12.5x20 0.35 0.12 895 12.5x25 0.32 0.16 850 16x31.5 0.28 0.11 1350 1000 12.5x25 0.20 0.068 1300 16x25 0.17 0.076 1495 0.15 0.098 1430 18x35.5 0.09 0.050 2190 2200 16x31.5 0.11 0.045 2110 3300 18x35.5 0.08 0.036 2580 16x31.5 (Note) ESR : 20, 120Hz ; Impedance : 20, 100kHz ; Rated ripple current : 105, 100kHz Rated voltage (V) Item Rated Capacitance (F) 160 Case ESR 200 Rated ripple current Case ESR 250 Rated ripple current Case ESR 315 Rated ripple current Case ESR 350 Rated ripple current Case ESR 400 Rated ripple current Case ESR Rated ripple current () (mArms) (mArms) DxL (mm) (mArms) DxL (mm) (mArms) DxL (mm) (mArms) DxL (mm) (mArms) DxL (mm) 0.47 6.3x11 529 12 6.3x11 529 12 6.3x11 529 12 6.3x11 705 11 6.3x11 705 11 1 6.3x11 248 18 6.3x11 248 18 6.3x11 248 18 6.3x11 331 16 6.3x11 331 18 8x11.5 331 18 2.2 6.3x11 113 26 6.3x11 113 8x11.5 113 DxL (mm) () () 26 () () () 30 8x11.5 150 27 8x11.5 150 30 10x12.5 150 30 3.3 8x11.5 75.4 37 8x11.5 75.4 37 10x12.5 75.4 43 10x12.5 100 36 10x12.5 100 36 10x16 40 4.7 8x11.5 52.9 44 10x12.5 52.9 50 10x12.5 52.9 50 10x16 70.6 47 10x16 70.6 47 10x20 70.6 10 10x12.5 24.9 75 10x16 24.9 80 10x20 24.9 90 10x20 33.2 75 12.5x20 33.2 79 12.5x20 33.2 79 22 10x20 11.3 135 10x20 11.3 135 12.5x25 11.3 155 12.5x25 15.1 130 12.5x25 15.1 130 16x25 15.1 130 33 12.5x20 7.54 175 12.5x25 7.54 190 12.5x25 7.54 190 16x25 10.1 160 16x25 10.1 160 16x31.5 10.1 175 47 12.5x25 5.29 230 12.5x25 5.29 230 16x25 5.29 225 16x31.5 7.06 210 16x31.5 7.06 210 18x35.5 100 16x25 2.49 330 16x31.5 2.49 360 18x35.5 2.49 340 18x40 3.32 335 18x40 3.32 335 220 18x35.5 1.13 500 18x40 1.13 525 100 7.06 52 220 (Note) ESR : 20, 120Hz ; Rated ripple current : 105, 120Hz NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. 99 CAT.No.2013/2014E Miniature Aluminum Electrolytic Capacitors DxL (mm) 1 63 Impedance Rated ripple RJB (R) MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS *5((1 &$3 &8VH0LQLDWXUH+LJK5HOLDELOLW\/RZ,PSHGDQFH&DSDFLWRUV Y& /RZ ,PSHGDQFH KRXUV $QWL FOHDQLQJ VROYHQW Smaller and higher ripple current than RJH Series. Guarantees 5000 hours at 105 C. ( 5 to 6.3 : 2000 hours ; 8 to 10 : 3000 hours) 0LQLDWXUL]HG /RZLPSHGDQFH RJB RJJ Marking color : White print on a black sleeve Specifications Item Performance Category temperature range () 55 to 105 20 Tolerance at rated capacitance (%) Leakage current (A) (20,120Hz) Less than 0.01CV 2 (after 2 minutes) C : Rated capacitance (F) ; V : Rated voltage (V) Tangent of loss angle (tan) (20) Rated voltage (V) 6.3 10 16 25 35 50 63 100 tan (max.) 0.22 0.19 0.16 0.14 0.12 0.10 0.08 0.07 0.02 is added to every 1000F increase over 1000F. Rated voltage (V) Characteristics at high and low temperature Impedance ratio (max.) -55/20 (20,120Hz) 6.3 10 16 25 35 50 63 100 3 3 3 3 3 3 3 3 (120Hz) Test time Endurance (105) (Applied ripple current) 5000 hours Leakage current The initial specified value or less Percentage of capacitance change Within 20% of initial value Tangent of the loss angle 200% or less of the initial specified value Miniature Aluminum Electrolytic Capacitors Test time 1000 hours Leakage current Shelf life (105) (5 to 6.3 : 2000 hours) (8 to 10 : 3000 hours) The initial specified value or less Within 15% of initial value Percentage of capacitance change 150% or less of the initial specified value Tangent of the loss angle Voltage application treatment Applicable standards JIS C5101-1, -4 1998 (IEC 60384-1 1992, -4 1985) Outline Drawing Unit : mm Sleeve d0.05 copper clad steel wire (tinned) F0.5 D0.5max. Vent (except5) L max. 15min. 5 min. Coefficient of Frequency for Rated Ripple Current Frequency (Hz) Rated capacitance (F) 0.47 to 180 220 to 390 470 to 1800 2200 to 3900 4700 to 10000 5 2.0 0.5 1.0 6.3 2.5 0.5 1.0 8 3.5 0.6 1.0 10 5.0 0.6 2.0 12.5 5.0 0.6 2.0 1k 10k 100k 0.75 0.85 0.88 0.90 0.95 0.90 0.95 0.96 0.98 1 1 1 1 1 1 Part numbering system (example : 10V1000F) RJB D F d 120 0.40 0.50 0.60 0.75 0.85 16 7.5 0.8 2.0 18 7.5 0.8 2.0 Series code 10 Rated voltage symbol V 102 M H4 # Rated capacitance Capacitance Casing symbol tolerance symbol symbol Taping(Forming) symbol The electric characteristics are described on page 172. CAT.No.2013/2014E 100 NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. (R) MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS RJB Standard Ratings Rated voltage (V) Item Rated capacitance (F) Case DxL (mm) Casing symbol 6.3 ripple Impedance ( max.) Rated current 20 -10 (mArms) Case DxL (mm) Casing symbol 10 ripple Impedance ( max.) Rated current 20 -10 (mArms) Case DxL (mm) Casing symbol 16 ripple Impedance ( max.) Rated current 20 -10 (mArms) 100 5x11.5 E3 0.65 1.3 181 220 6.3x11.5 F3 0.32 0.64 290 330 6.3x11.5 F3 0.32 0.64 290 8x12 G3 0.17 0.34 555 8x12 G3 0.17 0.34 470 8x12 G3 0.17 0.34 555 8x12 G3 0.17 0.34 555 10x12.5 H3 0.12 0.24 760 680 8x12 G3 0.17 0.34 555 10x12.5 H3 0.12 0.24 760 10x16 H4 0.080 0.16 1050 1000 10x12.5 H3 0.12 0.24 760 10x16 H4 0.080 0.16 1050 10x20 H5 0.062 0.124 1220 2200 10x25 H6 0.052 0.104 1440 12.5x20 5 0.042 0.084 1690 12.5x25 6 0.034 0.068 1950 3300 12.5x20 5 0.042 0.084 1690 12.5x25 6 0.034 0.068 1950 16x25 J6 0.028 0.056 2560 4700 12.5x30 7 0.030 0.060 2310 16x25 J6 0.028 0.056 2560 16x31.5 J7 0.025 0.050 3010 6800 16x25 J6 0.028 0.056 2560 16x31.5 J7 0.025 0.050 3010 16x31.5 J7 0.025 0.050 3010 Case Rated ripple current Case Rated ripple current Case DxL (mm) Casing symbol DxL (mm) Casing symbol 22 33 10000 25 Rated voltage (V) Item Rated capacitance (F) 35 Impedance ( max.) 20 -10 (mArms) DxL (mm) Casing symbol 5x11.5 555 50 Impedance ( max.) 20 -10 (mArms) E3 0.65 Impedance ( max.) 20 -10 Rated ripple current (mArms) 5x11.5 E3 0.95 1.9 170 F3 0.46 0.92 260 1.3 181 6.3x11.5 47 5x11.5 E3 0.65 1.3 181 6.3x11.5 F3 0.32 0.64 290 6.3x11.5 F3 0.46 0.92 260 100 6.3x11.5 F3 0.32 0.64 290 8x12 G3 0.17 0.34 555 8x12 G3 0.21 0.42 485 615 150 10x12.5 H3 0.19 0.38 220 8x12 G3 0.17 0.34 555 10x12.5 H3 0.12 0.24 760 10x16 H4 0.16 0.32 850 330 10x12.5 H3 0.12 0.24 760 10x16 H4 0.080 0.16 1050 10x20 H5 0.085 0.17 1050 10x16 H4 0.080 0.16 1050 10x20 H5 0.062 0.124 1220 12.5x20 5 0.060 0.12 1500 680 10x20 H5 0.062 0.124 1220 12.5x20 5 0.042 0.084 1690 12.5x25 6 0.045 0.090 1832 1000 12.5x20 5 0.042 0.084 1690 12.5x25 6 0.034 0.068 1950 16x25 J6 0.038 0.076 2240 2200 16x25 J6 0.028 0.056 2560 J7 0.025 0.050 3010 3300 16x31.5 J7 0.025 0.050 3010 Impedance ( max.) Rated ripple current Case 20 -10 (mArms) DxL (mm) 63 Rated voltage (V) Item Rated capacitance (F) 3.3 16x31.5 Case DxL (mm) Casing symbol 100 Casing symbol Impedance ( max.) 20 -10 Rated ripple current (mArms) 5x11.5 E3 1.9 7.6 57 57 5x11.5 E3 1.2 3.6 120 5x11.5 E3 1.9 7.6 10 5x11.5 E3 1.2 3.6 120 6.3x11.5 F3 1.1 4.4 78 22 6.3x11.5 F3 0.55 1.7 148 8x12 G3 0.53 2.1 275 33 6.3x11.5 F3 0.55 1.7 148 10x12.5 H3 0.47 1.9 319 47 8x12 G3 0.32 0.96 360 10x16 H4 0.32 1.3 424 100 10x12.5 H3 0.23 0.69 448 12.5x20 5 0.13 0.52 805 220 10x20 H5 0.12 0.36 676 16x25 J6 0.081 0.32 1290 330 12.5x20 5 0.075 0.23 979 16x25 J6 0.081 0.32 1290 470 12.5x25 6 0.065 0.20 1180 16x31.5 J7 0.059 0.23 1630 J7 0.042 0.13 1890 4.7 1000 16x31.5 (Note) Impedance : 100kHz ; Rated ripple current : 105, 100kHz NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. 101 CAT.No.2013/2014E Miniature Aluminum Electrolytic Capacitors 470 RJH *5((1 &$3 &8VH+LJK5HOLDELOLW\/RZ,PSHGDQFH&DSDFLWRUV (R) MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS Y& /RZ ,PSHGDQFH KRXUV $QWL FOHDQLQJ VROYHQW The capacitor of this Series achieves high reliability under the environmental loading prevailing in a piece of equipment on which it is mounted. Guarantees 5000 hours at 105. Low impedance (5 to 6.3 : 2000 hours ; 8 to 10 : 3000 hours) RJH RJJ Marking color : White print on a black sleeve Specifications Item Performance Category temperature range () 55 to 105 Tolerance at rated capacitance (%) 20 Leakage current (A) Less than 0.01CV 2 (after 2 minutes) C : Rated capacitance (F) ; V : Rated voltage (V) Tangent of loss angle (tan) (20,120Hz) (20) Rated voltage (V) 6.3 10 16 25 35 50 63 100 tan (max.) 0.22 0.19 0.16 0.14 0.12 0.10 0.08 0.07 (20,120Hz) 0.02 is added to every 1000F increase over 1000F. Rated voltage (V) Characteristics at high and low temperature Impedance ratio (max.) 6.3 10 16 25 35 50 63 -25/20 2 2 2 2 2 2 2 100 2 -55/20 3 3 3 3 3 3 3 3 (120Hz) 5000 hours Test time Endurance (105) (Applied ripple current) The initial specified value or less Leakage current Within 20% of initial value Percentage of capacitance change 1000 hours Test time The initial specified value or less Leakage current Within 15% of initial value Percentage of capacitance change 150% or less of the initial specified value Tangent of the loss angle Voltage application treatment Applicable standards JIS C5101-1, -4 1998 (IEC 60384-1 1992, -4 1985) Outline Drawing Unit : mm Vent (except5) Sleeve d0.05 copper clad steel wire (tinned) F0.5 D0.5max. Miniature Aluminum Electrolytic Capacitors 200% or less of the initial specified value Tangent of the loss angle Shelf life (105) (5 to 6.3 : 2000 hours) (8 to 10 : 3000 hours) L max. 15min. 5 min. Coefficient of Frequency for Rated Ripple Current Frequency (Hz) Rated capacitance (F) 0.47 to 4.7 5.6 to 47 56 to 270 330 to 1000 1200 to 15000 5 2.0 0.5 1.0 CAT.No.2013/2014E 6.3 2.5 0.5 1.0 8 3.5 0.6 1.0 10 5.0 0.6 2.0 12.5 5.0 0. 6 2.0 1k 10k 100k 0.68 0.76 0.85 0.93 0.95 0.78 0.87 0.90 0.98 1 1 1 1 1 1 Part numbering system (example : 10V5600F) RJH D F d 120 0.40 0.50 0.70 0.80 0.90 16 7.5 0.8 2.0 18 7.5 0.8 2.0 Series code 102 10 Rated voltage symbol V 562 M Rated capacitance Capacitance symbol tolerance symbol J7 # Casing symbol Taping(Forming) symbol NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. (R) MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS RJH Standard Ratings Rated voltage (V) Case DxL (mm) 6.3 Item Rated capacitance Casing symbol (F) ESR () 10 Impedance ( max.) 20 Rated ripple current Rated capacitance -10 (mArms) (F) ESR Impedance ( max.) () 20 -10 Rated ripple current (mArms) 5x11.5 E3 100 3.65 0.65 1.46 175 82 3.84 0.65 1.46 5x15 E4 150 2.43 0.46 1.04 235 100 3.15 0.46 1.04 235 6.3x11.5 F3 220 1.66 0.31 0.70 290 180 1.75 0.31 0.70 290 6.3x15 F4 330 1.11 0.20 0.45 400 220 1.43 0.20 0.45 400 8x12 G3 470 0.777 0.17 0.38 488 330 0.956 0.17 0.38 488 8x15 G4 680 0.537 0.13 0.29 617 470 0.671 0.13 0.29 617 8x20 G5 1000 0.365 0.095 0.21 800 680 0.464 0.095 0.21 800 10x12.5 H3 680 0.537 0.1 0.23 625 470 0.671 0.10 0.23 625 10x16 H4 820 0.446 0.08 0.18 825 560 0.563 0.080 0.18 825 10x20 H5 1200 0.305 0.062 0.14 1010 1000 0.316 0.062 0.14 1010 10x25 H6 1500 0.244 0.052 0.12 1190 1200 0.263 0.052 0.12 1190 10x30 H7 2200 0.181 0.044 0.099 1440 1500 0.211 0.044 0.099 1440 12.5x15 4 1200 0.305 0.062 0.14 1010 * 1000 0.316 0.062 0.14 1010 12.5x20 5 2200 0.181 0.042 0.095 1400 1800 0.176 0.042 0.095 1400 12.5x25 6 2700 0.148 0.034 0.076 1690 2200 0.159 0.034 0.076 1690 12.5x30 7 3900 0.111 0.03 0.068 1950 2700 0.130 0.030 0.068 1950 12.5x35 8 4700 0.099 0.024 0.054 2220 3300 0.116 0.024 0.054 2220 12.5x40 9 5600 0.089 0.021 0.047 2390 3900 0.098 0.021 0.047 2390 16x16 J4 * 2700 0.148 0.046 0.10 1310 * 1800 0.176 0.046 0.10 1310 16x20 J5 * 4700 0.099 0.034 0.077 1660 * 3300 0.116 0.034 0.077 1660 16x25 J6 5600 0.089 0.028 0.063 2070 3900 0.098 0.028 0.063 2070 16x31.5 J7 6800 0.079 0.025 0.056 2350 5600 0.080 0.025 0.056 2350 16x35.5 J8 8200 0.073 0.022 0.050 2550 6800 0.071 0.022 0.050 2550 16x40 J9 12000 0.059 0.018 0.041 2970 8200 0.067 0.018 0.041 2970 18x16 K4 * 3300 0.131 0.043 0.097 1460 * 2200 0.159 0.043 0.097 1460 18x20 K5 * 5600 0.089 0.030 0.068 1850 * 3900 0.098 0.030 0.068 1850 18x25 K6 * 6800 0.079 0.027 0.061 2120 * 4700 0.089 0.027 0.061 2120 18x31.5 K7 10000 0.064 0.023 0.052 2410 6800 0.071 0.023 0.052 2410 18x35.5 K8 12000 0.059 0.019 0.043 2680 8200 0.067 0.019 0.043 2680 18x40 K9 15000 0.054 0.017 0.038 3010 10000 0.059 0.017 0.038 3010 * 16 Item Rated capacitance Casing symbol (F) ESR () 25 Impedance ( max.) 20 -10 Rated ripple current Rated capacitance (mArms) (F) ESR () Impedance ( max.) 20 -10 Rated ripple current (mArms) 5x11.5 E3 56 4.74 0.65 1.46 175 39 5.96 0.65 1.46 175 5x15 E4 82 3.24 0.46 1.04 235 56 4.15 0.46 1.04 235 6.3x11.5 F3 120 2.21 0.31 0.70 290 82 2.83 0.31 0.70 290 6.3x15 F4 180 1.48 0.20 0.45 400 120 1.94 0.20 0.45 400 8x12 G3 270 0.983 0.17 0.38 488 180 1.29 0.17 0.38 488 8x15 G4 330 0.805 0.13 0.29 617 220 1.06 0.13 0.29 617 8x20 G5 470 0.565 0.095 0.21 800 330 0.704 0.095 0.21 800 10x12.5 H3 330 0.805 0.10 0.23 625 220 1.06 0.10 0.23 625 10x16 H4 390 0.681 0.080 0.18 825 270 0.861 0.080 0.18 825 10x20 H5 680 0.391 0.062 0.14 1010 470 0.495 0.062 0.14 1010 10x25 H6 820 0.324 0.052 0.12 1190 560 0.415 0.052 0.12 1190 10x30 H7 1200 0.222 0.044 0.099 1440 820 0.284 0.044 0.099 1440 12.5x15 4 680 0.391 0.062 0.14 1010 470 0.495 0.062 0.14 1010 12.5x20 5 1200 0.222 0.042 0.095 1400 820 0.284 0.042 0.095 1400 12.5x25 6 1500 0.177 0.034 0.076 1690 1000 0.233 0.034 0.076 1690 12.5x30 7 2200 0.136 0.030 0.068 1950 1500 0.155 0.030 0.068 1950 12.5x35 8 2700 0.111 0.024 0.054 2220 1800 0.130 0.024 0.054 2220 12.5x40 9 3300 0.101 0.021 0.047 2390 2200 0.121 0.021 0.047 2390 16x16 J4 * 1500 0.177 0.046 0.10 1310 * 820 0.284 0.046 0.10 1310 16x20 J5 * 2200 0.136 0.034 0.077 1660 * 1500 0.155 0.034 0.077 1660 16x25 J6 2700 0.111 0.028 0.063 2070 1800 0.130 0.028 0.063 2070 16x31.5 J7 3900 0.086 0.025 0.056 2350 2700 0.099 0.025 0.056 2350 16x35.5 J8 4700 0.078 0.022 0.050 2550 3300 0.091 0.022 0.050 2550 16x40 J9 5600 0.072 0.018 0.041 2970 3900 0.077 0.018 0.041 2970 18x16 K4 * 1500 0.177 0.043 0.097 1460 * 1200 0.194 0.043 0.097 1460 18x20 K5 * 2700 0.111 0.030 0.068 1850 * 1800 0.130 0.030 0.068 1850 18x25 K6 * 3900 0.086 0.027 0.061 2120 * 2700 0.099 0.027 0.061 2120 18x31.5 K7 4700 0.078 0.023 0.052 2410 3300 0.091 0.023 0.052 2410 18x35.5 K8 6800 0.064 0.019 0.043 2680 3900 0.077 0.019 0.043 2680 18x40 K9 8200 0.061 0.017 0.038 3010 4700 0.071 0.017 0.038 3010 * * (Note) ESR : 20, 120Hz ; Impedance : 100kHz ; Rated ripple current : 105, 100kHz * : The black circles in the capacitance column denote semi-standard products. The standard ratings follow the next page. NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. 103 CAT.No.2013/2014E Miniature Aluminum Electrolytic Capacitors Rated voltage (V) Case DxL (mm) 175 RJH (R) MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS Standard Ratings ESR () 7.37 5.10 3.56 2.43 1.66 1.11 0.905 1.33 1.11 0.604 0.511 0.356 0.604 0.356 0.293 0.200 0.166 0.133 0.356 0.200 0.166 0.111 0.106 0.087 0.293 0.166 0.111 0.106 0.087 0.081 35 Impedance ( max.) 20 -10 0.65 1.46 0.46 1.04 0.31 0.70 0.20 0.45 0.17 0.38 0.13 0.29 0.095 0.21 0.10 0.23 0.080 0.18 0.062 0.14 0.052 0.12 0.044 0.099 0.062 0.140 0.042 0.095 0.034 0.076 0.030 0.068 0.024 0.054 0.021 0.047 0.046 0.10 0.034 0.077 0.028 0.063 0.025 0.056 0.022 0.050 0.018 0.041 0.043 0.097 0.030 0.068 0.027 0.061 0.023 0.052 0.019 0.043 0.017 0.038 ESR () 11.1 7.37 4.92 3.40 2.82 1.95 1.62 2.37 1.95 1.11 0.885 0.738 0.885 0.604 0.492 0.341 0.283 0.237 0.604 0.341 0.283 0.196 0.162 0.133 0.403 0.237 0.196 0.162 0.133 0.111 63 Impedance ( max.) 20 -10 1.2 3.6 0.85 2.6 0.55 1.7 0.38 1.1 0.32 0.96 0.24 0.72 0.17 0.51 0.23 0.69 0.17 0.51 0.12 0.36 0.10 0.30 0.085 0.26 0.11 0.33 0.075 0.23 0.065 0.20 0.055 0.17 0.048 0.14 0.042 0.13 0.080 0.24 0.057 0.17 0.052 0.16 0.042 0.13 0.036 0.11 0.032 0.096 0.065 0.20 0.058 0.17 0.050 0.15 0.042 0.13 0.035 0.11 0.032 0.096 Rated voltage (V) Miniature Aluminum Electrolytic Capacitors Case Casing Item DxL (mm) symbol E3 5x11.5 E3 5x11.5 E3 5x11.5 E3 5x11.5 E3 5x11.5 E3 5x11.5 E4 5x15 F3 6.3x11.5 F4 6.3x15 G3 8x12 G4 8x15 G5 8x20 H3 10x12.5 H4 10x16 H5 10x20 H6 10x25 H7 10x30 4 12.5x15 5 12.5x20 6 12.5x25 7 12.5x30 8 12.5x35 9 12.5x40 J4 16x16 J5 16x20 J6 16x25 J7 16x31.5 J8 16x35.5 J9 16x40 K4 18x16 K5 18x20 K6 18x25 K7 18x31.5 K8 18x35.5 K9 18x40 Rated capacitance * * * * * * (F) 27 39 56 82 120 180 220 150 180 330 390 560 330 560 680 1000 1200 1500 560 1000 1200 1800 2200 2700 680 1200 1800 2200 2700 3300 Rated voltage (V) Item Case Casing DxL (mm) symbol E3 5x11.5 E4 5x15 F3 6.3x11.5 F4 6.3x15 G3 8x12 G4 8x15 G5 8x20 H3 10x12.5 H4 10x16 H5 10x20 H6 10x25 H7 10x30 4 12.5x15 5 12.5x20 6 12.5x25 7 12.5x30 8 12.5x35 9 12.5x40 J4 16x16 J5 16x20 J6 16x25 J7 16x31.5 J8 16x35.5 J9 16x40 K4 18x16 K5 18x20 K6 18x25 K7 18x31.5 K8 18x35.5 K9 18x40 Rated capacitance * * * * * * (F) 12 18 27 39 47 68 82 56 68 120 150 180 150 220 270 390 470 560 220 390 470 680 820 1000 330 560 680 820 1000 1200 Rated ripple current Rated capacitance (mArms) 175 235 290 400 488 617 800 625 825 1010 1190 1440 1010 1400 1690 1950 2220 2390 1310 1660 2070 2350 2550 2970 1460 1850 2120 2410 2680 3010 * * * * * * (F) 1 2.2 3.3 4.7 10 18 27 39 56 68 82 120 82 100 180 220 330 180 330 470 560 680 820 330 680 820 1000 1200 1500 470 820 1000 1500 1800 2200 Rated ripple current Rated capacitance (mArms) 120 135 148 153 360 469 682 448 553 676 876 1020 745 979 1180 1310 1470 1590 982 1210 1490 1890 2140 2410 1200 1460 1740 1990 2340 2560 * * * * * * (F) 5.6 8.2 12 18 22 33 39 27 33 56 68 100 68 100 120 180 220 270 120 180 220 330 390 470 150 270 330 390 560 680 ESR () 166 75.4 50.3 35.3 16.6 9.22 6.14 4.25 2.96 2.44 2.02 1.38 2.02 1.66 0.922 0.754 0.503 0.922 0.503 0.353 0.297 0.244 0.203 0.503 0.244 0.203 0.166 0.139 0.111 0.353 0.203 0.166 0.111 0.074 0.073 ESR () 20.7 14.2 9.68 6.45 5.28 3.52 2.98 4.30 3.52 2.07 1.71 1.16 1.71 1.16 0.968 0.646 0.528 0.431 0.968 0.646 0.528 0.352 0.298 0.248 0.775 0.431 0.352 0.298 0.208 0.171 50 Impedance ( max.) 20 -10 3.5 7.0 3.0 6.0 2.6 5.2 2.2 4.4 1.4 2.8 0.95 1.9 0.66 1.32 0.43 0.86 0.33 0.66 0.20 0.40 0.18 0.36 0.13 0.26 0.18 0.36 0.15 0.30 0.085 0.17 0.075 0.15 0.055 0.110 0.095 0.190 0.060 0.120 0.044 0.088 0.040 0.080 0.036 0.072 0.034 0.068 0.065 0.130 0.045 0.090 0.038 0.076 0.032 0.064 0.028 0.056 0.026 0.052 0.048 0.096 0.036 0.072 0.032 0.064 0.026 0.052 0.025 0.050 0.024 0.048 100 Impedance ( max.) 20 -10 1.9 7.6 1.3 5.2 1.1 4.4 0.62 2.5 0.53 2.1 0.35 1.4 0.27 1.1 0.47 1.9 0.32 1.3 0.25 0.1 0.18 0.72 0.15 0.60 0.20 0.80 0.13 0.52 0.11 0.44 0.090 0.36 0.075 0.30 0.060 0.24 0.130 0.52 0.11 0.44 0.081 0.32 0.059 0.23 0.052 0.21 0.045 0.18 0.12 0.48 0.085 0.34 0.071 0.28 0.058 0.23 0.054 0.22 0.041 0.16 Rated ripple current (mArms) 36 54 63 75 110 120 135 148 153 360 460 670 443 553 676 876 1010 745 979 1180 1310 1470 1590 982 1210 1490 1890 2140 2410 1180 1450 1720 1970 2310 2530 Rated ripple current (mArms) 57 74 78 85 275 360 490 319 424 499 634 739 613 805 857 1120 1240 1330 706 916 1290 1630 1750 1920 871 1170 1500 1630 1920 2100 (Note) ESR : 20, 120Hz ; Impedance : 100kHz ; Rated ripple current : 105, 100kHz * : The black circles in the capacitance column denote semi-standard products. CAT.No.2013/2014E 104 NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. (R) MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS Y&8VH0LQLDWXUH+LJK5HOLDELOLW\([WUD/RZ,PSHGDQFH&DSDFLWRUV *5((1 &$3 RJF /RZ Y& ,PSHGDQFH KRXUV $QWL FOHDQLQJ VROYHQW Higher ripple current than RJB Series. Low impedance 5-% 5-) Marking color : White print on a black sleeve Specifications Item Performance Category temperature range () -40 to 105 20 Tolerance at rated capacitance (%) Leakage current (A) (20,120Hz) Less than 0.01CV or 3 whichever is larger (after 2 minutes) C : Rated capacitance (F) ; V : Rated voltage (V) Tangent of loss angle (tan) (20) Rated voltage (V) 6.3 10 16 25 35 50 63 80 100 tan (max.) 0.22 0.19 0.16 0.14 0.12 0.10 0.09 0.09 0.08 0.02 is added to every 1000F increase over 1000F. 6.3 10 16 25 35 50 63 80 100 -25/20 2 2 2 2 2 2 2 2 2 -40/20 3 3 3 3 3 3 3 3 3 Rated voltage (V) Characteristics at high and low temperature Impedance ratio (max.) (20,120Hz) (120Hz) 5L & 7L : 5 & 6.3 : 8 & 10 : 12.5 to 18 : Test time Endurance (105) (Applied ripple current) hours hours (63 to 100WV:5000 hours) hours (63 to 100WV:7000 hours) hours (63 to 100WV:10000 hours) The initial specified value or less Leakage current Miniature Aluminum Electrolytic Capacitors Within 25% of initial value Percentage of capacitance change 200% or less of the initial specified value Tangent of the loss angle 1000 hours Test time The initial specified value or less Leakage current Shelf life (105) 1000 2000 3000 5000 Within 25% of initial value Percentage of capacitance change 200% or less of the initial specified value Tangent of the loss angle Voltage application treatment Applicable standards JIS C5101-1, -4 1998 (IEC 60384-1 1992, -4 1985) Outline Drawing Sleeve d0.05 copper clad steel wire (tinned) F0.5 D0.5max. Vent (except 5, 5L7L) Unit : mm Lmax. 5 min. 15min. Coefficient of Frequency for Rated Ripple Current Frequency (Hz) Rated capacitance (F) 5.6 to 180 220 to 390 470 to 1800 2200 to 3900 4700 to 6800 4 1.5 0.45 1.0 5 2.0 0.5 1.0 6.3 2.5 0.5 1.0 8 3.5 0.6 1.0 10 5.0 0.6 2.0 1k 10k 100k 0.75 0.85 0.87 0.90 0.95 0.90 0.94 0.95 0.95 0.98 1 1 1 1 1 Part numbering system (example : 10V1000F) RJF D F d 120 0.40 0.50 0.60 0.75 0.85 12.5 5.0 0.6 2.0 16 7.5 0.8 2.0 Series code 18 7.5 0.8 2.0 10 Rated voltage symbol V 102 M H4 # Rated capacitance Capacitance Casing symbol tolerance symbol symbol Taping(Forming) symbol * The electric characteristics are described on page 172. * The standard ratings are described on the next page. NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. 105 CAT.No.2013/2014E RJF (R) MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS Standard Ratings 6.3 Rated voltage (V) Item Case 10 Impedance ( max.) Rated ripple current Case 16 Impedance ( max.) Rated ripple current Case Impedance ( max.) Rated ripple current DxL (mm) Casing symbol (mArms) DxL (mm) Casing symbol 20 -10 (mArms) DxL (mm) Casing symbol 20 -10 18 4x7 D1 0.92 2.8 130 27 4x7 D1 0.89 2.7 6.3x5 F0 0.30 0.95 210 33 5x7 6.3x5 E1 F0 0.45 0.30 1.4 0.95 210 210 39 4x7 D1 0.85 2.6 47 6.3x5 F0 0.29 0.93 210 56 5x7 E1 0.44 1.4 210 E3 0.22 0.80 345 68 5x7 E1 0.43 1.3 210 300 100 6.3x5 F0 0.28 0.91 210 Rated capacitance (F) 20 -10 130 120 150 5x11.5 6.3x7 E3 F1 0.22 0.23 0.80 0.69 180 220 8x7 G1 0.15 0.45 380 F3 0.094 0.35 540 6.3x11.5 330 470 8x12 560 G3 0.056 0.19 345 300 945 5x11.5 6.3x7 130 5x11.5 F1 0.24 0.72 E3 0.22 0.8 345 F1 0.23 0.69 300 8x7 6.3x11.5 G1 F3 0.15 0.094 6.3x7 0.45 0.35 (mArms) 380 540 8x7 G1 0.15 0.45 380 F3 0.094 0.35 540 8x12 G3 G3 0.056 0.19 8x15 G4 0.045 0.15 1250 10x16 H4 0.028 0.10 1760 6.3x11.5 8x12 945 0.056 0.19 945 680 H3 0.039 0.14 1330 820 8x15 G4 0.046 0.15 1250 1000 10x12.5 H3 0.039 0.14 1330 10x16 H4 0.028 0.10 1760 10x20 H5 0.020 0.060 1960 10x12.5 1200 10x16 H4 0.028 0.10 1760 10x20 H5 0.020 0.060 1960 10x25 H6 0.018 0.054 2250 1500 10x20 H5 0.020 0.060 1960 10x25 H6 0.018 0.054 2250 12.5x20 5 0.017 0.043 2480 2200 10x25 H6 0.018 0.054 2250 12.5x20 5 0.017 0.043 2480 12.5x25 6 0.015 0.038 2900 2700 16x20 J5 0.015 0.038 3250 Miniature Aluminum Electrolytic Capacitors 3300 12.5x20 5 0.017 0.043 2480 12.5x25 6 0.015 0.038 2900 16x25 J6 0.013 0.035 3630 3900 12.5x25 6 0.015 0.038 2900 16x20 J5 0.015 0.038 3250 16x25 J6 0.013 0.035 3630 4700 12.5x30 7 0.013 0.033 3450 16x25 J6 0.013 0.035 3630 5600 16x20 J5 0.015 0.038 3570 16x25 J6 0.013 0.035 3630 6800 16x25 J6 0.013 0.035 3630 Case Rated ripple current Case Case (mArms) DxL (mm) Casing symbol Rated ripple current DxL (mm) Casing symbol (mArms) DxL (mm) Casing symbol 4x7 D1 1.0 3.0 130 10 5x5 E0 0.61 1.5 130 5x5 4x7 E0 D1 0.63 0.96 130 130 5x7 E1 0.50 1.5 210 15 4x7 D1 0.94 2.9 130 18 5x7 E1 0.47 1.5 210 F0 0.31 0.97 6.3x5 F0 0.32 1.0 210 E3 0.22 0.80 F1 0.25 0.75 25 Rated voltage (V) Item Rated capacitance (F) 5.6 22 6.3x5 35 Impedance ( max.) 20 -10 210 5x7 E1 0.46 33 39 E3 0.22 0.80 345 56 100 5x11.5 6.3x7 8x7 6.3x11.5 210 20 -10 27 47 1.4 F1 E3 0.26 0.34 0.78 1.18 345 8x7 G1 0.17 300 380 300 8x7 6.3x11.5 G1 F3 0.16 0.094 6.3x11.5 F3 0.14 0.50 385 0.45 0.41 380 405 8x12 G3 0.074 0.22 724 8x15 G4 0.061 0.18 950 10x12.5 H3 0.061 0.18 979 8x20 G5 0.046 0.14 1190 150 180 G3 0.056 0.19 945 8x12 G3 380 540 0.51 300 238 0.72 0.48 0.35 6.3x7 5x11.5 0.24 (mArms) 0.15 0.13 8x12 1.5 2.9 20 -10 Rated ripple current F1 270 Impedance ( max.) G1 F3 120 220 5x11.5 6.3x7 50 Impedance ( max.) 0.056 0.19 945 10x12.5 H3 0.039 0.14 1330 10x16 H4 0.042 0.12 1370 8x20 G5 0.029 0.11 1500 10x20 H5 0.030 0.090 1580 330 10x12.5 H3 0.039 0.14 1330 10x16 H4 0.028 0.10 1760 10x25 H6 0.028 0.085 1870 470 10x16 H4 0.028 0.10 1760 10x20 H5 0.020 0.060 1960 12.5x20 5 0.027 0.068 2050 560 10x25 H6 0.018 0.054 2250 12.5x25 6 0.023 0.059 2410 680 10x20 H5 0.020 0.060 1960 12.5x20 5 0.017 0.043 2480 16x20 J5 0.023 0.059 2730 820 10x25 H6 0.018 0.054 2250 16x20 J5 0.023 0.059 2730 1000 12.5x20 5 0.017 0.043 2480 3010 1200 12.5x25 6 0.015 0.038 2900 16x25 J6 0.021 0.056 16x20 J5 0.015 0.038 3250 J6 0.013 0.035 3630 0.013 0.035 1500 12.5x25 6 0.015 0.038 2900 16x25 1800 16x20 J5 0.015 0.038 3250 16x25 J6 3630 2200 16x25 J6 0.013 0.035 3630 2700 16x25 J6 0.013 0.035 3630 (Note) Impedance : 100kHz CAT.No.2013/2014E Rated ripple current : 105, 100kHz 106 NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. (R) MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS RJF Standard Ratings Rated voltage (V) 63 Item Rated capacitance (F) 6.8 Case D L Casing symbol 80 Impedance ( max.) Rated ripple current 20 -10 (mArms) 15 5 11.5 E3 0.88 3.50 27 33 6.3 11.5 F3 0.35 1.40 39 47 56 8 68 82 100 120 150 180 220 270 330 390 470 10 G3 0.22 0.88 12.5 H3 0.11 0.44 5 11.5 E3 1.40 5.60 125 6.3 11.5 F3 0.57 2.30 205 8 12 G3 0.36 1.40 335 265 8 15 G4 0.25 1.00 450 10 12.5 H3 0.17 0.66 480 500 8 20 G5 0.19 0.76 565 12.5 H3 0.17 0.66 480 10 16 H4 0.11 0.47 600 10 20 H5 0.084 0.34 800 690 16 H4 0.11 0.47 600 12.5 15 4 0.11 0.34 750 10 20 H5 0.084 0.34 800 10 25 H6 0.069 0.28 900 H6 0.069 5 0.062 950 10 10 20 H5 0.056 0.23 1150 10 25 H6 0.046 0.19 1350 12.5 0.062 0.18 1100 12.5 16 20 20 J5 0.048 0.18 0.15 1100 1350 12.5 30 7 0.042 0.13 1500 12.5 25 6 0.047 0.14 1250 12.5 35 8 0.036 0.11 1650 16 20 J5 0.048 0.15 1350 16 25 J6 0.038 0.12 1700 18 20 K5 0.045 0.14 1500 12.5 25 6 0.031 0.093 1900 12.5 30 7 0.042 0.13 1500 12.5 40 9 0.032 0.095 1800 12.5 30 7 0.028 0.084 2300 12.5 35 8 0.036 0.11 1650 16 31.5 J7 0.032 0.095 1850 16 20 J5 0.032 0.096 2000 16 25 J6 0.038 0.12 1700 18 25 K6 0.036 0.11 1750 18 20 K5 0.045 0.14 1500 8 0.024 12.5 35 0.07 2500 16 35.5 J8 0.029 0.086 2000 18 31.5 K7 0.030 0.090 1900 31.5 J7 0.032 0.095 1850 16 40 J9 0.027 0.081 2480 18 35.5 K8 0.027 0.081 2200 16 35.5 J8 0.029 0.086 2000 K9 0.026 0.077 2700 18 31.5 K7 0.030 0.090 1900 K9 0.026 0.077 2700 0.021 0.063 2800 16 25 J6 0.025 0.075 2600 18 20 K5 0.030 0.090 2500 16 31.5 J7 0.021 0.063 2850 18 25 K6 0.024 0.072 2800 16 35.5 J8 0.019 0.057 2900 16 40 J9 0.018 0.054 3400 18 31.5 K7 0.020 0.060 3300 1500 18 35.5 K8 0.018 0.054 3400 1800 18 40 K9 0.017 0.051 3500 (Note) Impedance : 100kHz 16 18 40 18 40 Rated ripple current : 105, 100kHz NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. 107 CAT.No.2013/2014E Miniature Aluminum Electrolytic Capacitors 1200 5 900 9 1000 20 0.28 40 820 25 12.5 680 1500 0.13 10 0.31 10 0.076 0.041 -10 (mArms) H4 current 20 16 5 L 10 D 820 20 -10 (mArms) Impedance ( max.) Rated ripple 0.48 20 Casing symbol 0.12 12.5 current G5 L Case 20 D Casing symbol 100 Impedance ( max.) Rated ripple 165 8 560 12 Case RJL (R) MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS *5((1 &$3 &8VH0LQLDWXUH/RQJ/LIHH[WUD/RZ,PSHGDQFH&DSDFLWRUV /RZ Y& ,PSHGDQFH KRXUV $QWL FOHDQLQJ VROYHQW Long life than RJF Series. Guarantees 4000 to 10000 hours at 105. Long life RJL RJF Marking color : White print on a black sleeve Specifications Item Performance Category temperature range () -40 to 105 Tolerance at rated capacitance (%) 20 Leakage current (A) Less than 0.01CV or 3 whichever is larger (after 2 minutes) C : Rated capacitance (F), V : Rated voltage (V) Tangent of loss angle (tan) (20,120Hz) (20) Rated voltage (V) 6.3 10 16 25 35 50 63 100 tan (max.) 0.22 0.19 0.16 0.14 0.12 0.10 0.09 0.08 0.02 is added to every 1000F increase over 1000F. Rated voltage (V) Characteristics at high and low temperature Impedance ratio (max.) (20,120Hz) 6.3 10 16 25 35 50 63 Z-25/Z20 4 3 2 2 2 2 2 100 2 Z-40/Z20 8 6 4 3 3 3 3 3 (120Hz) 5, 6.3 : 5000 hours (6.310WV : 4000 hours) 8, 10 : 7000 hours (6.310WV : 6000 hours) 12.5, 16 : 10000 hours (6.310WV : 8000 hours) Test time Endurance (105) (Applied ripple current) The initial specified value or less Leakage current Within 25% of initial value Percentage of capacitance change 1000 hours Test time The initial specified value or less Leakage current Shelf life (105) Within 25% of initial value Percentage of capacitance change 200% or less of initial specified value Tangent of the loss angle Voltage application treatment JIS C5101-1, -4 1998 (IEC 60384-1 1992, -4 1985) Applicable standards Outline Drawing Unit : mm Coefficient of Frequency for Rated Ripple Current Frequency (Hz) Vent (except 5) d0.05 copper clad steel wire (tinned) Sleeve F0.5 D0.5max. Miniature Aluminum Electrolytic Capacitors 200% or less of the initial specified value Tangent of the loss angle L max. 15min. 5 min. Rated capacitance (F) to 33 47 to 270 330 to 680 820 to 1800 2200 to 6800 5 2.0 0.5 1.0 CAT.No.2013/2014E 6.3 2.5 0.5 1.0 8 3.5 0.6 1.0 10 5.0 0.6 2.0 12.5 5.0 0.6 2.0 1k 10k 100k 0.70 0.73 0.77 0.80 0.85 0.90 0.92 0.94 0.96 0.98 1.00 1.00 1.00 1.00 1.00 Part numbering system (example : 10V1000F) RJL D F d 120 0.42 0.50 0.55 0.60 0.70 16 7.5 0.8 2.0 Series code 108 10 Rated voltage symbol V 102 M H4 # Rated capacitance Capacitance Casing symbol tolerance symbol symbol Taping(Forming) symbol NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. (R) MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS RJL Standard Ratings 6.3 Rated voltage (V) Item Rated capacitance (F) 56 100 120 150 220 330 470 560 680 820 1000 1200 1500 1800 2200 2700 3300 3900 4700 5600 6800 Case DxL (mm) Casing symbol 5x11.5 6.3x11.5 8x12 8x12 10x12.5 8x15 10x16 10x20 10x25 10x25 12.5x20 12.5x30 16x20 16x25 E3 F3 G3 G3 H3 G4 H4 H5 H6 H6 5 7 J5 J6 Rated capacitance (F) Case DxL (mm) Casing symbol 5x11.5 6.3x11.5 8x12 8x15 10x16 10x20 10x25 12.5x20 12.5x25 12.5x25 16x20 12.5x35 16x25 E3 F3 G3 G4 H4 H5 H6 5 6 6 J5 8 J6 Rated capacitance (F) 6.8 15 27 47 56 68 82 100 120 180 220 270 330 390 470 560 20 -10 (mArms) DxL (mm) 0.58 0.22 0.13 0.13 0.080 0.087 0.060 0.046 0.042 0.042 0.035 0.024 0.027 0.021 2.3 0.87 0.52 0.52 0.32 0.35 0.24 0.18 0.17 0.17 0.12 0.078 0.078 0.060 210 340 640 640 865 840 1210 1400 1650 1650 1900 2650 2530 2930 5x11.5 6.3x11.5 8x12 8x15 10x12.5 Casing symbol Case DxL (mm) Casing symbol 5x11.5 6.3x11.5 8x12 8x15 10x16 10x20 10x25 12.5x20 12.5x25 16x20 16x20 16x25 E3 F3 G3 G4 H4 H5 H6 5 6 J5 J5 J6 20 -10 2.3 0.87 0.52 0.35 0.24 0.18 0.17 0.12 0.089 0.089 0.078 0.065 0.060 Case (mArms) DxL (mm) 0.58 0.22 0.13 0.087 0.080 2.3 0.87 0.52 0.35 0.32 210 340 640 840 865 10x16 10x16 10x20 10x25 12.5x20 H4 H4 H5 H6 5 0.060 0.060 0.046 0.042 0.035 0.24 0.24 0.18 0.17 0.12 1210 1210 1400 1650 1900 12.5x20 12.5x25 12.5x35 16x25 5 6 8 J6 0.035 0.027 0.020 0.021 0.12 0.089 0.065 0.060 1900 2230 2880 2930 5x11.5 6.3x11.5 8x12 8x15 10x16 Casing symbol Rated ripple current Case (mArms) DxL (mm) 210 340 640 840 1210 1400 1650 1900 2230 2230 2530 2880 2930 5x11.5 6.3x11.5 8x12 8x15 8x15 8x20 10x16 10x20 10x25 12.5x20 12.5x25 12.5x25 16x20 12.5x35 16x25 Rated ripple current Case (mArms) DxL (mm) Casing symbol 55 115 232 300 357 466 531 690 784 1040 1040 1250 5x11.5 6.3x11.5 8x12 10x12.5 8x20 10x16 10x20 10x25 12.5x20 12.5x25 16x20 16x25 E3 F3 G3 H3 G5 H4 H5 H6 5 6 J5 J6 Casing symbol E3 F3 G3 G4 G4 G5 H4 H5 H6 5 6 6 J5 8 J6 Rated ripple current 20 -10 (mArms) E3 F3 G3 G4 H4 0.58 0.22 0.13 0.087 0.060 2.3 0.87 0.52 0.35 0.24 210 340 640 840 1210 10x20 10x20 10x25 12.5x20 12.5x25 H5 H5 H6 5 6 0.046 0.046 0.042 0.035 0.027 0.18 0.18 0.17 0.12 0.089 1400 1400 1650 1900 2230 12.5x25 16x20 12.5x35 16x25 6 J5 8 J6 0.027 0.089 0.027 0.078 0.020 0.065 0.021 0.060 2230 2530 2880 2930 50 Impedance ( max.) 20 -10 0.58 0.22 0.13 0.087 0.087 0.069 0.060 0.046 0.042 0.035 0.027 0.027 0.027 0.020 0.021 Impedance ( max.) 2.3 0.87 0.52 0.35 0.35 0.27 0.24 0.18 0.17 0.12 0.089 0.089 0.078 0.065 0.060 Rated ripple current Case (mArms) DxL (mm) Casing symbol 210 340 640 870 870 1050 1210 1400 1650 1900 2230 2230 2530 2880 2930 5x11.5 5x11.5 6.3x11.5 8x12 8x15 10x12.5 8x20 10x16 10x20 10x25 12.5x20 12.5x25 12.5x25 12.5x30 16x25 E3 E3 F3 G3 G4 H3 G5 H4 H5 H6 5 6 6 7 J6 Impedance ( max.) Rated ripple current 20 -10 (mArms) 1.50 6.0 0.70 2.8 0.30 1.2 0.17 0.68 0.12 0.48 0.12 0.48 0.091 0.36 0.084 0.34 0.060 0.24 0.055 0.22 0.045 0.15 0.034 0.11 0.034 0.11 0.030 0.10 0.025 0.075 100 180 295 555 730 760 910 1050 1220 1440 1660 1950 1950 2310 2555 100 Impedance ( max.) 20 -10 2.3 1.2 0.63 0.45 0.31 0.21 0.20 0.16 0.12 0.091 0.091 0.073 20 -10 Rated ripple current 35 Impedance ( max.) 0.58 0.22 0.13 0.087 0.060 0.046 0.042 0.035 0.027 0.027 0.027 0.020 0.021 16 Impedance ( max.) E3 F3 G3 G4 H3 63 Rated voltage (V) Item Case 9.3 5.0 2.8 2.1 1.5 0.94 0.84 0.64 0.45 0.38 0.38 0.27 Impedance ( max.) 20 -10 2.3 1.2 0.63 0.43 0.33 0.31 0.21 0.20 0.16 0.120 0.091 0.073 9.3 5.0 2.8 1.8 1.6 1.5 0.94 0.84 0.64 0.45 0.38 0.27 Rated ripple current (mArms) 55 115 232 288 362 357 466 531 690 784 1040 1250 (Note) Impedance : 100kHz ; Rated ripple current : 105, 100kHz NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. 109 CAT.No.2013/2014E Miniature Aluminum Electrolytic Capacitors 10 22 33 47 56 100 120 150 180 220 270 330 470 560 680 820 1000 1200 1500 1800 2200 2700 Rated ripple current 25 Rated voltage (V) Item 10 Impedance ( max.) RJD (R) MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS &8VHPLQLDWXUH+L5HOLDELOLW\/RZLPSHGDQFH&DSDFLWRUV Smaller and higher ripple current than RJB series. Guarantees 8000 hours at 105. (5 to 6.3 : 2000 hours :8 to 10 : 3000 hours) *5((1 &$3 /RZ $QWL FOHDQLQJ VROYHQW Y& ,PSHGDQFH KRXUV Miniaturized Low impedance RJD RJB Marking color : White print on a black sleeve Specifications Item Performance 55 to 105 20 Less than 0.01CV or 3 whichever is larger (after 2 minutes) C : Rated capacitance (F), V : Rated voltage (V) Category temperature range () Tolerance at rated capacitance (%) Leakage current (A) Rated voltage (V) tan (max.) Tangent of loss angle (tan) 6.3 0.22 10 0.19 16 0.16 25 0.14 (20,120Hz) (20) 35 0.12 0.02 is added to every 1000F increase over 1000F. Rated voltage (V) Characteristics at high Impedance ratio (max.) and low temperature 55/20 (20,120Hz) 6.3 10 16 25 35 3 3 3 3 3 (120Hz) 5 to 6.3 : 2000 hours 8 to 10 : 3000 hours 12.5 to 18 : 8000 hours Test time Endurance (105) The initial specified value or less Within 20% of initial value 200% or less of the initial specified value Leakage current Percentage of capacitance change Tangent of the loss angle (Applied ripple current) Test time : 1000 hours ; other items are the same as those for the endurance. Voltage application treatment JIS C5101-1, -4 1998 (IEC 60384-1 1992, -4 1985) Outline Drawing Vent (except 5) Unit : mm Sleeve d0.05 copper clad steel wire (tinned) F0.5 D0.5max. Miniature Aluminum Electrolytic Capacitors Shelf life (105) Applicable standards L max. 15min. Coefficient of Frequency for Rated Ripple Current Frequency (Hz) Rated Capacitance (F) to 56 68 to 330 390 to 1000 1200 to 18000 5 2.0 0.5 1.0 6.3 2.5 0.5 1.0 8 3.5 0.6 1.0 10 5.0 0.6 2.0 12.5 5.0 0.6 2.0 120 300 1k 10k100k 0.20 0.55 0.70 0.80 0.30 0.65 0.75 0.85 0.50 0.75 0.80 0.90 0.80 0.85 0.90 0.95 1 1 1 1 Part numbering system(example : 6.3V10000F) 5 min. RJD Series code F d 5060 16 7.5 0.8 2.0 18 7.5 0.8 2.0 6 Rated voltage symbol V 103 M Rated capacitance Capacitance symbol tolerance symbol J7 &DVLQJ V\PERO # Taping(Forming) symbol If it is whisker preventive structure, should change # into G . (Note) Whisker preventive structure is possible for more than 8. CAT.No.2013/2014E 110 NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. (R) MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS RJD Standard Ratings Rated voltage(V) 6.3 Case Item 10 Impedance max. Rated ripple current Case 16 Impedance max. Rated ripple current Case Impedance max. Rated ripple current D L Casing symbol 20 -10 mArms D L Casing symbol 20 -10 mArms D L Casing symbol 20 -10 22 5 11.5 E3 0.5 1.0 182 33 5 11.5 E3 0.5 1.0 182 47 5 11.5 E3 0.5 1.0 182 82 5 15 E4 0.46 0.92 237 5 11.5 E3 182 Rated capacitance 100 150 5 11.5 E3 0.50 1.0 0.5 1.0 mArms 182 6.3 11.5 F3 0.25 0.50 295 6.3 11.5 F3 0.25 0.50 295 180 6.3 11.5 F3 0.25 0.50 295 6.3 15 F4 0.18 0.36 432 220 6.3 11.5 F3 0.25 0.50 295 6.3 15 F4 0.18 0.36 432 330 6.3 11.5 F3 0.25 295 6.3 15 F4 0.18 0.36 432 8 12 G3 0.117 0.234 567 390 8 12 G3 0.117 0.234 567 8 15 G4 0.085 0.170 733 12.5 H3 0.090 0.180 764 20 G5 0.065 0.130 996 733 470 6.3 15 F4 0.18 0.5 0.36 432 8 12 G3 0.117 0.234 567 10 560 8 12 G3 0.117 0.234 567 8 680 8 12 G3 0.117 0.234 567 12 G3 0.117 0.234 567 8 8 15 G4 0.085 0.170 12.5 H3 0.090 0.180 764 20 G5 0.065 0.130 996 10 16 H4 0.068 0.136 1060 10 16 H4 0.068 0.136 1060 10 8 820 15 G4 0.085 0.170 733 10 12.5 H3 0.090 0.180 764 10 12.5 H3 0.090 0.180 G4 0.085 0.170 733 8 10 8 15 12.5 H3 0.090 0.180 764 20 G5 0.065 0.130 996 10 12.5 H3 0.090 0.180 764 10 16 H4 0.068 0.136 1060 10 20 H5 0.052 0.104 1230 764 8 20 G5 0.065 0.130 996 10 20 H5 0.052 0.104 1230 1450 1000 8 1200 10 16 H4 0.068 0.136 1060 10 16 H4 0.068 0.136 1060 10 25 H6 0.045 0.090 8 20 G5 0.065 0.130 996 10 20 H5 0.052 0.104 1230 10 25 H6 0.045 0.090 1450 10 16 H4 0.068 0.136 1060 12.5 15 4 0.062 0.124 1210 10 30 H7 0.035 0.070 1830 12.5 15 4 0.062 0.124 1210 1500 10 20 H5 0.052 0.104 1230 10 20 H5 0.052 0.104 1230 10 25 H6 0.045 0.090 1450 10 25 H6 0.045 0.090 1450 2200 10 2700 25 H6 0.045 0.090 1450 10 25 H6 0.045 0.090 1450 10 30 H7 0.035 0.070 1830 12.5 20 5 0.038 0.076 1700 3300 3900 12.5 12.5 25 25 6 6 0.030 0.030 0.060 0.060 12.5 20 5 0.038 0.076 1700 10 30 H7 0.035 0.070 1830 12.5 20 5 0.038 0.076 1700 1950 18 16 K4 0.038 0.076 2010 30 7 0.025 0.050 2330 16 20 J5 0.029 0.058 2230 5600 8200 35 8 0.022 0.044 30 H7 0.035 0.070 1830 20 5 0.038 0.076 1700 16 16 J4 0.043 0.086 1700 12.5 25 6 0.030 0.060 1950 18 16 K4 0.038 0.076 2010 12.5 30 7 0.025 0.050 2330 2230 25 6 0.030 0.060 1950 16 20 J5 0.029 0.058 12.5 25 6 0.030 0.060 1950 12.5 35 8 0.022 0.044 2620 18 16 K4 0.038 0.076 2010 16 20 J5 0.029 0.058 2230 12.5 30 7 0.025 0.050 2330 12.5 40 9 0.017 0.034 3160 16 25 J6 0.022 0.044 2650 1950 12.5 12.5 10 12.5 12.5 4700 6800 16 20 J5 0.029 0.058 2230 12.5 35 8 0.022 0.044 2620 12.5 40 9 0.017 0.034 3160 16 25 J6 0.022 0.044 2650 16 31.5 J7 0.018 0.036 3210 18 25 K6 0.020 0.040 3000 2620 12.5 40 9 0.017 0.034 3160 16 25 J6 0.022 0.044 2650 18 20 K5 0.028 0.056 2500 16 31.5 J7 0.018 0.036 3210 16 40 J9 0.015 0.030 3880 18 25 K6 0.020 0.040 3000 18 35.5 K8 0.015 0.030 3960 10000 12000 18 25 K6 0.020 0.040 3000 15000 18 35.5 K8 0.015 0.030 3960 18000 18 40 K9 0.014 0.028 4300 18 40 18 20 K5 0.028 0.056 2500 16 25 J6 0.220 0.440 2650 16 31.5 J7 0.018 0.036 3210 18 25 K6 0.020 0.040 3000 18 35.5 K8 0.015 0.030 3960 18 40 K9 0.014 0.028 4300 K9 0.014 0.028 4300 (Note) Rated ripple current : 105 , 100kHz, Impedance : 20 , 100kHz NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. 111 CAT.No.2013/2014E Miniature Aluminum Electrolytic Capacitors 1800 RJD (R) MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS Standard Ratings Rated voltage(V) 25 Item Case 35 Impedance max. Rated ripple current Case Impedance max. Rated ripple current Rated capacitance D L Casing symbol 20 -10 D L Casing symbol 20 -10 10 5.0 11.5 E3 0.50 1.0 182 5.0 11.5 E3 0.50 1.0 182 22 5.0 11.5 E3 0.50 1.0 182 5.0 11.5 E3 0.50 1.0 182 182 mArms mArms 27 5.0 11.5 E3 0.50 1.0 182 5.0 11.5 E3 0.50 1.0 33 5.0 11.5 E3 0.50 1.0 182 5.0 11.5 E3 0.50 1.0 182 47 5.0 11.5 E3 0.50 1.0 182 6.3 11.5 F3 0.25 0.50 295 56 5.0 15 E4 0.46 0.92 237 6.3 11.5 F3 0.25 0.50 295 82 6.3 11.5 F3 0.25 0.50 295 6.3 15 F4 0.18 0.36 432 100 6.3 11.5 F3 0.25 0.50 295 8.0 12 G3 0.117 0.234 567 120 6.3 15 F4 0.18 0.36 432 150 8.0 12 G3 0.117 0.234 567 8.0 G3 0.117 0.234 567 180 220 8.0 270 8.0 12 12 G3 0.117 0.234 G3 0.117 0.234 12 8.0 12 G3 0.117 0.234 567 567 8.0 15 G4 0.085 0.170 733 8.0 15 G4 0.085 0.170 733 12.5 H3 0.090 0.180 764 20 G5 0.065 0.130 996 1060 567 10.0 8.0 12 G3 0.117 0.234 567 8.0 12.5 H3 0.090 0.180 764 10.0 16 H4 0.068 0.136 8.0 20 G5 0.065 0.130 996 10.0 16 H4 0.068 0.136 1060 10.0 20 H5 0.052 0.104 1230 1230 330 10.0 390 8.0 8.0 15 G4 0.085 0.170 733 15 G4 0.085 0.170 733 12.5 H3 0.090 0.180 764 470 10.0 8.0 20 G5 0.065 0.130 996 10.0 20 H5 0.052 0.104 10.0 16 H4 0.068 0.136 1060 12.5 15 4 0.062 0.124 1210 10.0 16 H4 0.068 0.136 1060 10.0 25 H6 0.045 0.090 1450 10.0 20 H5 0.052 0.104 1230 12.5 20 5 0.038 0.076 1700 12.5 15 4 0.062 0.124 1210 1830 560 680 820 Miniature Aluminum Electrolytic Capacitors 10.0 25 H6 0.045 0.090 1450 10.0 30 H7 0.035 0.070 12.5 20 5 0.038 0.076 1700 12.5 20 5 0.038 0.076 1700 12.5 25 6 0.030 0.060 1950 1000 1200 12.5 20 5 0.038 0.076 1700 18.0 16 K4 0.038 0.076 2010 10.0 30 H7 0.035 0.070 1830 12.5 30 7 0.025 0.050 2330 2230 1500 16.0 16 J4 0.043 0.086 1700 16.0 20 J5 0.029 0.058 12.5 25 6 0.030 0.060 1950 12.5 35 8 0.022 0.044 2620 18.0 16 K4 0.038 0.076 2010 16.0 20 J5 0.029 0.058 2230 12.5 30 7 0.025 0.050 2330 1800 2200 16.0 20 J5 0.029 0.058 2230 12.5 35 8 0.022 0.044 2620 18.0 25 K6 0.020 0.040 3000 2700 3300 3900 4700 12.5 40 9 0.017 0.034 3160 16.0 25 J6 0.022 0.044 2650 18.0 20 K5 0.028 0.056 2500 18.0 25 K6 0.020 0.040 12.5 40 9 0.017 0.034 3160 16.0 25 J6 0.022 0.044 2650 18.0 20 K5 0.028 0.056 2500 16.0 31.5 J7 0.018 0.036 3210 18.0 25 K6 0.020 0.040 3000 18.0 31.5 K7 0.016 0.032 3660 18.0 35.5 K8 0.015 0.030 3960 18.0 40 K9 0.014 0.028 4300 18.0 35.5 K8 0.015 0.030 3960 18.0 40 K9 0.014 0.028 4300 3000 5600 18.0 35.5 K8 0.015 0.030 3960 18.0 40 K9 0.014 0.028 4300 6800 18.0 35.5 K8 0.015 0.030 3960 18.0 40 K9 0.014 0.028 4300 8200 18.0 40 K9 0.014 0.028 4300 (Note) Rated ripple current : 105 , 100kHz, Impedance : 20 , 100kHz CAT.No.2013/2014E 112 NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. (R) )RU$LU%DJ MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS *5((1 &$3 Y& KRXUV RJE $QWL FOHDQLQJ )RU$LU%DJ VROYHQW For AirBag application High capacitance, low impedance, and good low temperature behavior Guarantees 5000 hours at 105. For SAS AirBag RJE RJD Marking color : White print on a black sleeve Specifications Item Performance 55 to 105 0 to 30 Less than 0.01CV (after 2 minutes) C : Rated capacitance (F) , V : Rated voltage (V) Category temperature range () Tolerance at rated capacitance (%) Leakage current (A) Tangent of loss angle (tan) (20,120Hz) (20) Rated voltage (V) tan (max.) 0.02 is added to every 1000F increase over 1000F 25 0.20 Rated voltage (V) 25 35 3 3 Characteristics at high Impedance ratio (max.) and low temperature 35 0.16 (20,120Hz) 55/20 (120Hz) 5000 hours The initial specified value or less Within -20% to +20% of initial value 200% or less of the initial specified value Test time Leakage current Percentage of capacitance change Tangent of loss angle Endurance (105) Shelf life (105) Test time : 1000 hours ; other items are the same as those for the endurance. Voltage application treatment JIS C5101-1, -18 1998 (IEC 60384-1 1992, -4 1985) Applicable standards Unit : mm Coefficient of Frequency for Rated Ripple Current Frequency (Hz) Sleeve Vent d0.05 copper clad steel wire (tinned) 5060 120 1k 10k100k 0.70 0.80 0.75 0.85 0.90 0.95 1 1 F0.5 D0.5max. 830 to 1100 1200 to 11000 L max. D F d Rated capacitance (F) 12.5 5.0 0.6 2.0 16 7.5 0.8 2.0 15min. Part numbering system(example : 25V4200F) 5 min. RJE 18 7.5 0.8 2.0 Series code V 25 Rated voltage symbol 422 A 9 (#)Q &DVLQJ Rated capacitance Capacitance symbol tolerance symbol V\PERO 2SWLRQDO V\PERO Taping(Forming) symbol If it is whisker preventive structure, should change # into G . (Note) Whisker preventive structure is possible. Standard Ratings Rated voltage(V) 25 Item Capacitance Case size Casing (F) symbol DxL (mm) 12.5x15 4 1100 35 ESR (max.) / 100kHz Rated ripple current 20 40 (mArms) Capacitance ESR (max.) / 100kHz Rated ripple current (F) 20 40 (mArms) 0.174 0.52 1210 830 0.174 0.52 1210 12.5x20 5 1800 0.107 0.27 1670 1300 0.107 0.27 1670 12.5x25 6 2400 0.084 0.21 1950 1600 0.084 0.21 1950 12.5x30 7 3200 0.070 0.18 2330 2200 0.070 0.18 2330 12.5x35 8 3700 0.062 0.16 2620 2500 0.062 0.16 2620 12.5x40 9 4200 0.048 0.12 3160 2900 0.048 0.12 3160 16x16 J4 2100 0.121 0.36 1700 1500 0.121 0.36 1700 16x20 J5 3100 0.082 0.21 2230 2100 0.082 0.21 2230 16x25 J6 4300 0.062 0.16 2650 3000 0.062 0.16 2650 16x31.5 J7 5800 0.051 0.13 3210 4000 0.051 0.13 3210 16x35.5 J8 6800 0.045 0.11 3570 4600 0.045 0.11 3570 16x40 J9 7800 0.042 0.11 3880 5300 0.042 0.11 3880 18x16 K4 3000 0.107 0.32 2010 2100 0.107 0.32 2010 18x20 K5 4300 0.079 0.20 2500 3000 0.079 0.20 2500 18x25 K6 6000 0.056 0.14 3000 4200 0.056 0.14 3000 18x31.5 K7 8000 0.045 0.11 3660 5600 0.045 0.11 3660 18x35.5 K8 9300 0.042 0.11 3960 6500 0.042 0.11 3960 18x40 K9 11000 0.040 0.10 4300 7400 0.040 0.10 4300 (Note) Rated ripple current : 105, 100kHz NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. 113 CAT.No.2013/2014E Miniature Aluminum Electrolytic Capacitors Outline Drawing RHS Y&8VH0LQLDWXUH+LJK5LSSOH/RQJ/LIH&DSDFLWRUV (R) MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS *5((1 &$3 Y& KRXUV Higher ripple current. Guarantees 4000 to 5000 hours at 105. Best-suited to electronic ballast. High ripple, Long life 5- 5+6 Marking color : White print on a black sleeve Specifications Item Performance Category temperature range () -40 to 105 (-25 to +105 at 350V or more) Rated Voltage (V) 160 to 450 Tolerence at rated capacitance (%) 20 (20,120Hz) CV 1000Less than 0.06CV40 (after 1 minutes) CV<1000Less than 0.03CV70 (after 1 minutes) C : Rated capacitance (F), V : Rated voltage (V) Leakage current (A) Tangent of loss angle (20) Rated voltage (V) 160 to 250 350 to 400 450 Tangent of loss angle 0.12 0.15 0.20 (20,120Hz) Rated voltage (V) Characteristics at high and low temperature Impedance ratio 160 to 250 350 to 450 -25/20 3 6 -40/20 4 - (120Hz) 10 : 4000 hours 12.5 to 18 : 5000 hours Test time The initial specified value or less Leakage current Within -20% to +20% of initial value Capacitance change 300% or less of the initial specified value Tangent of loss angle 1000 hours Test time The initial specified value or less Leakage current Shelf life (105) Capacitance change Within -20% to +20% of initial value Tangent of loss angle 200% or less of the initial specified value Voltage application treatment JIS C 5101-01, -04 1998 (IEC 60384-1 1992, 60384-4 1985) Applicable Standards Outline Drawing Unit : mm Vent Sleeve d0.05 copper clad steel wire (tinned) F0.5 D0.5max. Miniature Aluminum Electrolytic Capacitors Endurance (105) (Applied ripple current) Lmax. 15min. 5 min. D F d 10 5.0 0.6 12.5 5.0 0.6 16 7.5 0.8 18 7.5 0.8 2 2.5 2.5 20L : 3.0 25 to 40L : 2.5 CAT.No.2013/2014E Coefficient of Frequency for Rated Ripple Current Frequency (Hz) Rated voltage (V) 160 to 450 50,60 120 300 1k 10k or more 0.75 1.00 1.20 1.35 1.50 Part numbering system (example : 400V10F) RHS 400 V Series code 114 Rated voltage symbol 100 M 5 # Rated capacitance Capacitance Casing symbol tolerance symbol symbol B Optional symbol Taping(Forming) symbol NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. (R) MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS RHS Standard Ratings Rated voltage(V) Item Case Casing DxL mm symbol 10x12.5 H3 10x16 H4 10x20 H5 12.5x20 5 12.5x25 6 16x20 160 Rated capacitance F ESR 200 Rated ripple current max. mArms Rated capacitance F 4.7 ESR max. mArms 3.3 72 50 4.7 51 55 95 10 19 90 4.7 51 9.0 111 - - - - - - 145 10 19 105 - - - - 22 15 150 - - 96 10 19 60 4.7 22 9.0 145 22 9.0 - - - - - 33 6.0 190 33 6.0 190 - - 280 22 - 33 280 47 4.0 280 47 4.0 - - - - - J5 47 4.0 280 47 4.0 16x25 J6 100 2.0 380 - - 16x31.5 J7 - - - 100 16x35.5 J8 - - - - - - - 2.0 - 410 - - 24 120 9.0 180 22 11 180 6.0 250 33 6.0 250 22 47 4.0 300 33 100 2.0 410 - 300 - - 2.0 410 - - - 100 18x31.5 K7 - - - - - - - - - 18x35.5 K8 220 0.9 630 - - - - - - Rated capacitance ESR Rated ripple current Rated capacitance ESR max. mArms F - - 300 - - 300 - Rated ripple current H3 2.2 109 40 1 318 30 H4 3.3 72 50 2.2 145 45 10x20 H5 4.7 51 70 3.3 96 65 10 24 120 - - - 22 - - - 5 12.5x25 6 16x25 J6 16x31.5 J7 33 16x35.5 J8 82 18x20 K5 22 18x25 K6 33 18x31.5 K7 18x35.5 K8 - - - 100 2.6 750 18x40 K9 - - - 120 2.2 800 11 200 - - - - - - 11 - 68 80 10 32 140 200 22 14 220 - 33 10 280 7.0 245 47 5.6 420 3.2 500 68 3.9 520 200 - 7.0 245 68 47 5.0 300 82 82 3.2 500 - 4.7 - - 3.9 424 3.2 580 - Miniature Aluminum Electrolytic Capacitors 12.5x20 11 - 5.0 210 max. mArms 10x12.5 - 47 - 180 450 10x16 22 5.0 4.0 380 - F 7.0 - 47 2.0 - Case Casing DxL mm symbol 47 11 100 100 400 - - - K6 Item - - K5 410 - 10 18x20 2.0 65 - 18x25 Rated voltage(V) Rated ripple current max. mArms 82 - 22 F ESR 60 - - max. mArms Rated capacitance 19 - - 350 Rated ripple current 41 - - - F ESR 10 - - 19 Rated capacitance - 41 - 10 250 Rated ripple current - (Note) ESR : 20, 120Hz ; Rated ripple current : 105, 120Hz. NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. 115 CAT.No.2013/2014E RHC Y&8VH0LQLDWXUH+LJK5LSSOH/RQJ/LIH&DSDFLWRUV (R) MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS *5((1 &$3 Y& KRXUV Higher ripple current. Guarantees 5000 to 10000 hours at 105. Best-suited to electronic ballast. High ripple, Long life 5+6 5+& Marking color : White print on a black sleeve Specifications Item Performance Category temperature range () -25 to 105 Rated Voltage (V) 160 to 450 Tolerence at rated capacitance (%) 20 Leakage current (A) Less than 0.04CV + 100 (after 1 minutes) C : Rated capacitance (F), V : Rated voltage (V) Rated voltage (V) Tangent of loss angle (20,120Hz) 160 to 250 Tangent of loss angle (20) 350 to 450 0.10 (0.15) 0.12 (0.20) (20,120Hz) The black circles in the capacitance column correspond. Rated voltage (V) Characteristics at high and low temperature Impedance ratio 160 to 250 350 to 450 3 6 -25/20 (120Hz) 10x12.5 : 5000 hours 10x16 to 20 : 8000 hours 12.5 to 18 : 10000 hours Test time Endurance (105) The initial specifide value or less Leakage current (Applied ripple current) Within -30% to 30% of initial value Tangent of loss angle 300% or less of the initial specified value 1000 hours Test time The initial specifide value or less Leakage current Shelf life (105) Capacitance change Within -20% to 20% of initial value Tangent of loss angle 200% or less of the initial specified value Voltage application treatment JIS C 5101-01, -04 1998 (IEC 60384-1 1992, 60384-4 1985) Applicable standards Outline Drawing Unit : mm Vent d0.05 copper clad steel wire (tinned) Sleeve F0.5 D0.5max. Miniature Aluminum Electrolytic Capacitors Capacitance change Lmax. D F d 10 5.0 0.6 2.0 12.5 5.0 0.6 2.5 CAT.No.2013/2014E 16 7.5 0.8 2.5 15min. 5 min. Coefficient of Frequency for Rated Ripple Current Frequency (Hz) Rated voltage (V) 160 to 450 50 120 1k 10k 100k 0.30 0.50 0.80 0.90 1.00 Part numbering system (example : 400V10F) RHC 400 Series code Rated voltage symbol V 100 M H5 # B Rated capacitance Capacitance Casing symbol tolerance symbol symbol Optional symbol Taping(Forming) symbol 18 7.5 0.8 2.5 116 NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. (R) MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS RHC Standard Ratings Rated voltage(V) Item Case Casing DxL mm symbol 10x12.5 10x16 160 Rated capacitance F H3 H4 10x25 H5 200 Rated ripple current Rated capacitance max. mArms F ESR 250 Rated ripple current Rated capacitance max. mArms F - 28 200 28 200 1.5 106 - - - - - - 2.2 72 140 - - - - - - - - - 3.3 48 180 4.7 10 13 320 20 220 - - - 10 13 320 - - - - - - 6.6 500 22 33 4.0 650 33 47 2.8 750 - - - - - - - - - 6.8 4.7 6.8 10 6.0 500 - - 10 16 - - - - - - 33 4.0 720 - - - - 1.3 1420 68 120 1.7 1500 - - - - 12.5x35 8 - - - - - 100 68 - 47 2.8 880 - 2.8 980 33 4.0 800 22 2.0 1300 2.8 980 - - - - - - - 1.3 1350 - - 2.0 1300 33 2.0 47 1300 16x20 J5 100 1.3 1420 100 1.3 1420 - 16x25 J6 150 0.9 1890 150 0.9 1890 100 16x31.5 J6 - 270 Case Casing DxL mm symbol 10x12.5 180 1.1 2200 - 0.6 2370 220 0.9 2380 150 0.7 2470 - - - - - - - Rated ripple current Rated capacitance ESR Rated capacitance ESR 400 F H3 H4 max. mArms F 70 - - - 107 100 - - - 2.2 72 140 - - - 3.3 80 160 - - - 3.3 48 180 2.2 72 150 4.7 34 220 3.3 48 180 27 320 5.6 28 250 6.8 - 4.7 - - 34 220 23 280 5.6 28 250 10 16 350 6.8 23 280 12 22 450 10 27 330 18 15 290 - - - 15 11 550 10 16 450 22 12 650 - - - 760 15 11 600 22 12 650 - - H5 10x25 H6 12.5x20 5 12.5x25 6 12.5x30 7 33 8.0 720 12.5x35 8 47 5.6 960 16x20 J5 16x25 27 7.2 10 760 33 22 7.2 760 22 33 4.8 900 - J6 47 3.4 1180 33 18x25 K6 68 2.3 1470 18x31.5 K7 82 3.2 1600 100 2.7 1720 18x35.5 K8 - - - 0.9 47 3.4 1080 68 3.9 1120 - - 1940 68 - 2200 - 100 - 2.0 - 2.7 - 1470 - 1650 120 2.2 1945 150 1.8 2215 18x50 KB - 3.4 1200 1260 - - - 3.9 120 730 47 K9 7.2 - 68 100 KA 800 980 18x45 - 0.9 - 1530 - 8.0 4.8 - 18x40 - - 900 Rated ripple current 160 22 1.3 - 4.8 max. mArms 1.5 10x20 220 - - 650 450 1 10 - - 7.0 150 - - 2.7 1500 2.2 1660 - 1.8 Miniature Aluminum Electrolytic Capacitors 10x16 - Rated voltage(V) Item - - 350 - 100 220 280 - 6 - - 23 - 6 6.8 - 650 12.5x30 68 - 4.0 12.5x25 1180 250 22 2.0 2.0 220 28 500 68 68 34 5.6 6.0 - - 4.7 320 450 H7 47 250 13 9.0 5 1180 100 20 22 10x30 Rated ripple current max. mArms - 12.5x20 K6 F ESR - - K7 max. mArms Rated capacitance - - 18x31.5 350 Rated ripple current - H6 18x25 ESR - 22 10x20 ESR - 2050 (Note) ESR : 20 , 120Hz ; Rated ripple current : 105 , 100kHz NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. 117 CAT.No.2013/2014E RHD Y&8VH0LQLDWXUH+LJK5LSSOH/RQJ/LIH&DSDFLWRUV (R) MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS *5((1 &$3 Y& KRXUV Higher ripple current. Guarantees 8000 to 12000 hours at 105. Best-suited to electronic ballast. High ripple, Long life 5+& 5+' Marking color : White print on a black sleeve Specifications Item Performance Category temperature range () -25 to 105 Rated Voltage (V) 160 to 450 20 Tolerence at rated capacitance (%) Leakage current(A) (20,120Hz) (20) Less than 0.04CV + 100 (after 1 minutes) C:Rated capacitance (F),V:Rated Voltage (V) Rated voltage (V) Tangent of loss angle 160 to 250 Tangent of loss angle 350 to 450 0.15 0.20 (20,120Hz) Rated voltage (V) Characteristics at high and low temperature 160 to 250 350 to 450 3 6 -25/20 Impedance ratio (120Hz) 10x12.5L 8000hours 10x16,20L 10000hours 12.5 to 18 12000hours Test time Endurance (105) (Applied ripple current) The initial specified value or less Leakage current Within -30% to 30% of initial value Capacitance change 1000hours Test time The initial specified value or less Leakage current Shelf life (105) Within -20% to 20% of initial value Capacitance change 200% or less of the initial specified value Tangent of loss angle Voltage application treatment JIS C 5101-01, -04 1998 (IEC 60384-1 1992,60384-4 1985) Applicable Standards Outline Drawing Unit : mm Vent d0.05 copper clad steel wire (tinned) Sleeve F0.5 D0.5max. Miniature Aluminum Electrolytic Capacitors 300% or less of the initial specified value Tangent of loss angle Lmax. 15min. 5 min. D F d 10 5.0 0.6 12.5 5.0 0.6 16 7.5 0.8 18 7.5 0.8 2 2.5 2.5 20L : 3.0 25 to 40L : 2.5 CAT.No.2013/2014E Coefficient of Frequency for Rated Ripple Current Frequency (Hz) Rated voltage (V) 160 to 450 50 120 1k 10k 100k 0.30 0.50 0.80 0.90 1.00 Part numbering system (example : 400V47F) RHD 400 Series code 118 Rated voltage symbol V 470 M K6 # Rated capacitance Capacitance Casing symbol tolerance symbol symbol B Optional symbol Taping(Forming) symbol NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. (R) MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS RHD Standard Ratings Rated voltage(V) Item Case Casing DxL mm symbol 10x12.5 H3 10x16 10x20 H4 H5 160 Rated capacitance F - 10 ESR 200 Rated ripple current Rated capacitance max. mArms - 20 F ESR 250 Rated ripple current max. mArms Rated capacitance F - 10 20 250 250 10 20 250 - 6.8 ESR 350 Rated ripple current max. mArms 29 - 20 Rated capacitance F 4.7 56 200 - 6.8 39 220 27 280 22 9.0 500 22 9.0 500 10 280 10 33 6.0 500 33 6.0 600 - - - - - - - - 39 5.1 640 - - - - - - - - 47 4.2 660 - - - - - - H6 - 10x30 H7 - - - 56 3.5 700 - - - - 47 4.2 660 33 6.0 600 22 9.0 600 22 5 Rated ripple current max. mArms 250 10x25 12.5x20 ESR - 12 - - 350 - - - 47 4.2 660 33 6.0 600 - - - - - - 56 3.5 700 - - - - - - 12.5x25 6 68 2.9 760 68 2.9 760 47 4.2 720 - - - 12.5x30 7 - - - - - - - - - 47 5.6 425 16x20 J5 68 2.9 760 68 2.9 760 47 4.2 720 33 8.0 500 16x25 J6 100 2.0 1120 100 2.0 1120 68 2.9 920 47 5.6 660 16x31.5 J7 150 1.3 1360 150 1.3 1360 100 2.0 1200 68 3.9 850 220 0.9 1400 - - - - - - - - - 18x20 K5 100 2.0 1120 100 2.0 1120 68 2.9 920 47 5.6 660 18x25 K6 850 18x31.5 18x35.5 150 1.3 1360 150 1.3 1360 100 2.0 1200 68 3.9 220 0.9 1400 220 0.9 1400 - - - - - - K7 330 0.6 2580 220 0.9 1700 150 1.3 1500 100 2.6 1420 K8 - - - - - - - - 150 1.7 2115 Rated capacitance ESR Rated capacitance ESR Rated voltage(V) Item Case Casing DxL mm symbol 10x16 H4 400 F 10x25 H6 12.5x20 5 max. mArms F Rated ripple current max. mArms 80 200 4.7 56 130 6.8 39 220 6.8 39 140 27 280 4.7 56 140 - 6.8 39 150 - - 18 - - 14 - 10 27 280 500 15 18 380 - - - 10 27 320 - - - 15 18 380 12 430 12.5x25 6 22 430 22 12.5x30 7 47 5.6 910 - - - 12.5x40 9 - - - 47 5.6 880 16x20 J5 16x25 J6 16x31.5 J7 16x40 J9 18x20 K5 18x25 K6 18x31.5 K7 12 430 - 8.0 640 22 47 5.6 1180 47 5.6 840 100 2.6 1510 33 8.0 640 22 47 5.6 840 33 8.0 700 - - - 56 4.7 800 68 3.9 1000 47 5.6 880 82 3.2 1280 - - - 100 2.6 1640 68 3.9 1130 22 33 12 - 12 - 560 - - - 33 8.0 700 - Miniature Aluminum Electrolytic Capacitors H5 450 Rated ripple current 3.3 10 10x20 - - 12 - 560 18x35.5 K8 - - - 82 3.2 1200 18x40 K9 120 2.2 1740 100 2.6 1670 18x45 KA 150 1.7 1970 - - - (Note) ESR : 20 , 120Hz ; Rated ripple current : 105 , 100kHz NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. 119 CAT.No.2013/2014E RKD &8VH0LQLDWXUH/RZ,PSHGDQFH (R) MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS *5((1 &$3 Y& /RZ= KRXUV $QWL FOHDQLQJ VROYHQW Smaller and low impedance than RK series. Guarantees 5000 hours at 125 (8 : 2000h,10 : 3000h) Miniaturized, Low Z 5. 5.' Marking color : White print on a black sleeve Specifications Item Performance Category temperature range () 40 to 125 20 Tolerance at rated capacitance (%) (20,120Hz) Less than 0.01CV or 4 whichever is larger (after 1 2 minute) C : Rated capacitance (F), V : Rated voltage (V) Leakage current (A) Tangent of loss angle (tan) Rated voltage (V) 10 16 25 35 50 63 80 100 tan (max.) 0.20 0.16 0.14 0.12 0.10 0.10 0.08 0.08 (20,120Hz) 0.02 is added to every 1000F increase over 1000F. Rated voltage (V) Characteristics at high and low temperature (20) Impedance ratio (max.) -40/20 10 16 25 35 50 63 80 100 4 3 3 3 3 3 3 3 (120Hz) 5000 hours Test time Endurance (125) (Applied ripple current) The initial specified value or less Leakage current Within 30% to 30% of initial value Percentage of capacitance change Test time :1000 hours; other items are the same as those for the endurance. Voltage application treatment Shelf life (125) -4 1998 (IEC 60384-1 1992, -4 1985) JIS C5101-1, -18 Applicable standards Outline Drawing Unit : mm Sleeve d0.05 copper clad steel wire (tinned) F0.5 D0.5max. Miniature Aluminum Electrolytic Capacitors 300% or less of the initial specified value Tangent of the loss angle Vent (8 : 2000 hours) (10 : 3000 hours) L max. 15min. 5 min. Coefficient of Frequency for Rated Ripple Current Frequency (Hz) Rated capacitance (F) 100 to 180 220 to 390 470 to 1800 2200 to 6800 8 3.5 0.6 1.0 10 5.0 0.6 2.0 12.5 5.0 0.6 2.0 120 1k 0.40 0.50 0.60 0.68 0.75 0.85 0.88 0.90 0.90 0.95 0.96 0.98 10k100k 1 1 1 1 Part numbering system (example : 10V1000F) RKD D F d 5060 16 7.5 0.8 2.0 18 7.5 0.8 2.0 Series code 10 Rated voltage symbol V 102 M H5 Rated capacitance symbol Capacitance tolerance symbol Casing symbol # Taping(Forming) symbol If it is whisker preventive structure, should change # into G . (Note) Whisker preventive structure is possible for more than 8. CAT.No.2013/2014E 120 NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. (R) MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS RKD Standard Ratings Rated voltage (V) Item Rated capacitance 10 Case DxL (mm) Casing symbol 16 Impedance Rated ripple current Case DxL (mm) ( max.) (mArms) 100 - - - - 220 8x12 G3 0.153 500 330 8x12 10x12.5 G3 H3 0.153 0.098 470 10x12.5 H3 0.098 Casing symbol 25 Impedance Rated ripple current Case ( max.) (mArms) DxL (mm) 500 725 8x12 8x12 10x12.5 8x12 10x12.5 G3 G3 H3 G3 H3 0.153 0.153 0.098 0.153 0.098 500 500 725 500 725 725 10x16 H4 0.075 951 10x20 H5 0.057 1130 12.5x15 4 0.059 1150 1000 10x20 12.5x20 16x16 8x12 8x12 10x12.5 10x12.5 10x16 10x16 H4 0.075 951 10x20 H5 0.057 1130 1550 1880 1600 12.5x20 5 0.040 1550 - - - - 6 J5 7 J6 K5 8 J6 K5 9 J7 J7 J8 K6 K8 K7 J9 K8 K9 0.032 0.032 0.029 0.024 0.029 0.023 0.024 0.029 0.020 0.020 0.020 0.019 0.022 0.017 0.018 0.017 0.017 0.016 1880 2020 2160 2550 2320 2580 2550 2320 2920 3040 3040 3280 2880 3710 3410 3630 3710 4000 Impedance Rated ripple current ( max.) (mArms) - 0.131 0.097 0.088 0.069 0.066 - - - 1070 1350 1530 1980 2120 - - - - - 1500 - - - - - - - - 1800 - - - - - - - - 6 J5 K4 0.032 0.032 0.041 1880 2020 1800 6 J6 K5 0.032 0.024 0.029 1880 2550 2320 - - - - - - 5600 - - - - - - - - 6800 - - - - - - - - 12.5x25 16x20 12.5x30 16x25 18x20 12.5x35 16x25 18x20 12.5x40 16x31.5 16x31.5 16x35.5 18x25 18x35.5 18x31.5 16x40 18x35.5 18x40 Impedance Rated ripple current Case Impedance Rated ripple current Case ( max.) (mArms) DxL (mm) ( max.) (mArms) DxL (mm) 0.098 - 0.070 - 0.047 0.039 0.030 0.028 930 - 1170 - 1680 1990 2670 2900 - - 0.099 - 0.062 0.058 0.053 - - - 1230 - 1850 2010 2350 - 16x25 J6 0.024 2550 16x31.5 J7 0.020 3040 18x20 K5 0.029 2320 18x25 K6 0.022 2880 3300 3900 4700 - 16x31.5 18x25 - - - J7 K6 0.020 0.022 3040 2880 Rated voltage (V) Item Rated capacitance 220 330 470 560 820 1000 1800 2200 - 16x35.5 18x31.5 - - - J8 K7 0.019 0.018 3280 3410 50 Case DxL (mm) 10x20 - 12.5x20 - 12.5x30 16x25 18x31.5 18x35.5 Casing symbol - - 5 - 7 J6 K7 K8 63 - - 16x20 - 16x31.5 16x35.5 18x40 - Casing symbol - - J5 - J7 J8 K9 - 8x12 10x12.5 10x16 10x16 10x20 10x20 12.5x20 16x16 12.5x25 16x25 18x20 12.5x30 16x20 12.5x35 16x31.5 18x25 12.5x40 16x25 16x31.5 16x35.5 18x25 Casing symbol - 16x20 16x25 18x25 18x35.5 18x40 - - - J5 J6 K6 K8 K9 - - Rated ripple current ( max.) (mArms) G3 H3 H4 H4 H5 H5 5 J4 6 J6 K5 7 J5 8 J7 K6 9 J6 J7 J8 K6 0.153 0.098 0.075 0.075 0.057 0.057 0.040 0.044 0.032 0.024 0.029 0.029 0.032 0.023 0.020 0.022 0.020 0.024 0.020 0.019 0.022 500 725 951 951 1130 1130 1550 1600 1880 2550 2320 2160 2020 2580 3040 2880 2920 2550 3040 3280 2880 3280 16x35.5 J8 0.019 18x31.5 K7 0.018 3410 16x40 J9 0.017 3630 18x35.5 K8 0.017 3710 - - - - 18x40 K9 0.016 4000 - - - - - - - - Impedance Rated ripple current ( max.) (mArms) 0.131 0.097 0.077 0.069 0.066 - - - 1070 1350 1740 1940 2120 - - - 80 Casing symbol Impedance 100 Case DxL (mm) 16x20 16x25 16x35.5 16x40 18x40 - - - Casing symbol J5 J6 J8 J9 K9 - - - (Note) Rated ripple current : 125 , 100kHz, Impedance : 20 , 100kHz NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. 121 CAT.No.2013/2014E Miniature Aluminum Electrolytic Capacitors 0.040 0.032 0.044 - - DxL (mm) 500 500 725 725 951 5 6 J4 - - (mArms) 0.153 0.153 0.098 0.098 0.075 12.5x20 12.5x25 16x16 - 2700 ( max.) G3 G3 H3 H3 H4 1130 1550 1600 - 12.5x25 16x25 18x20 Case 0.057 0.040 0.044 - 12.5x25 16x20 18x16 Rated ripple current H5 5 J4 1200 2200 Casing symbol 35 Impedance RPK &8VH/RQJ/LIH&DSDFLWRUV (R) MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS *5((1 &$3 Y& /RZ ,PSHGDQFH KRXUV $QWL FOHDQLQJ VROYHQW Guarantees 5000 hours at 125. Best-suited to smoothing circuits and control circuits for industrial equipment power supplies of which long life and high reliability are required. NC terminal added items are lineup for vibration resistance. High temperature, long life RKD RPK Marking color : White print on a black sleeve Specifications Item Performance Category temperature range () -40 to 125 (20,120Hz) Tolerance at rated capacitance (%) 20 Leakage current (A) Less than 0.01CV or 4 whichever is larger (after 2 minutes) C : Rated capacitance (F) , V : Rated voltage (V) Tangent of loss angle (tan) (20) Rated voltage (V) 10 16 25 35 50 63 80 100 tan (max.) 0.20 0.16 0.14 0.12 0.10 0.10 0.08 0.08 0.02 is added to every 1000F increase over 1000F. Rated voltage (V) Characteristics at high and low temperature Impedance ratio (max.) (20,120Hz) 10 16 25 35 50 63 80 100 4 3 3 3 3 3 3 3 Z-40/Z20 (120Hz) 5000 hours Test time The initial specified value or less Leakage current Endurance (125) (Applied ripple current) Within -30% to 30% of initial value Percentage of capacitance change 300% or less of the initial specified value Tangent of the loss angle Test time :1000 hours; other items are the same as those for the endurance. Voltage application treatment JIS C5101-1, -4 -18 1998 (IEC 60384-1 1992, -4 1985) Outline Drawing d0.05 copper clad steel wire (tinned) Sleeve F0.5 Vent Unit : mm D0.5max. Miniature Aluminum Electrolytic Capacitors Shelf life (125) Applicable standards NC Coefficient of Frequency for Rated Ripple Current Frequency (Hz) Rated capacitance (F) 220 to 330 470 to 1000 2200 to 6800 D F F1 d 12.5 5.0 2.5 0.6 2.0 15min 16 7.5 3.75 0.8 2.0 5 min. 18 7.5 3.75 0.8 2.0 1k 10k 100k 0.85 0.88 0.90 0.95 0.96 0.98 1 1 1 Part numbering system RPK series L max. 120 0.50 0.60 0.68 F10.5 16V2200F RK Series code 16 Rated voltage symbol V 222 M Rated capacitance Capacitance tolerance symbol symbol J6 Casing symbol D# Taping(Forming) symbol If it is whisker preventive structure, should change # into G . (Note) Whisker preventive structure is possible. CAT.No.2013/2014E 122 NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. (R) MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS RPK Standard Ratings Rated voltage (V) Item Rated capacitance 470 10 Case DxL (mm) - Casing symbol 16 Impedance Rated ripple current Case ( max.) (mArms) DxL (mm) - - - 4 0.059 1150 - Casing symbol 25 Impedance Rated ripple current Case ( max.) (mArms) DxL (mm) - - - 12.5x20 5 0.040 1550 - 0.040 0.032 0.044 1550 1880 1600 5 0.040 1550 - - - 12.5x25 16x20 12.5x30 16x25 18x20 12.5x35 16x25 18x20 6 J5 7 J6 K5 8 J6 K5 0.032 0.032 0.029 0.024 0.029 0.023 0.024 0.029 1880 2020 2160 2550 2320 2580 2550 2320 12.5x40 9 0.020 2920 J7 J7 J8 K6 K8 K7 J9 K8 K9 0.020 0.020 0.019 0.022 0.017 0.018 0.017 0.017 0.016 3040 3040 3280 2880 3710 3410 3630 3710 4000 Impedance Rated ripple current Case ( max.) (mArms) DxL (mm) - 0.131 0.097 0.088 0.069 0.066 - - - 1070 1350 1530 1980 2120 - - 16x16 J4 0.044 1600 - - - - - - 12.5x20 1500 - - - - - - - - 1800 - - - - - - - - 6 J5 K4 0.032 0.032 0.041 1880 2020 1800 6 J6 K5 0.032 0.024 0.029 1880 2550 2320 - - - - - - 2700 - 12.5x25 16x25 18x20 - 16x25 J6 0.024 2550 16x31.5 J7 0.020 3040 18x20 K5 0.029 2320 18x25 K6 0.022 2880 3300 3900 4700 - 16x31.5 18x25 - - - J7 K6 0.020 0.022 3040 2880 - 16x35.5 18x31.5 - - - J8 K7 0.019 0.018 3280 3410 - 16x31.5 16x31.5 16x35.5 18x25 18x35.5 18x31.5 16x40 18x35.5 18x40 - - - - - - - - 6800 - - - - - - - - Impedance Rated ripple current Case Impedance Rated ripple current Case ( max.) (mArms) DxL (mm) ( max.) (mArms) DxL (mm) - - 0.070 - 0.047 0.039 0.030 0.028 - - 1170 - 1680 1990 2670 2900 - - 0.099 - 0.062 0.058 0.053 - - - 1230 - 1850 2010 2350 - Item Rated capacitance 220 330 470 560 820 1000 1800 2200 50 Case DxL (mm) - - 12.5x20 - 12.5x30 16x25 18x31.5 18x35.5 Casing symbol - - 5 - 7 J6 K7 K8 63 - - 16x20 - 16x31.5 16x35.5 18x40 - Casing symbol - - J5 - J7 J8 K9 - Casing symbol - 16x20 16x25 18x25 18x35.5 18x40 - - - J5 J6 K6 K8 K9 - - Rated ripple current ( max.) (mArms) 5 J4 6 J6 K5 7 J5 8 J7 K6 9 J6 J7 J8 K6 0.040 0.044 0.032 0.024 0.029 0.029 0.032 0.023 0.020 0.022 0.020 0.024 0.020 0.019 0.022 1550 1600 1880 2550 2320 2160 2020 2580 3040 2880 2920 2550 3040 3280 2880 3280 16x35.5 J8 0.019 18x31.5 K7 0.018 3410 16x40 J9 0.017 3630 18x35.5 K8 0.017 3710 - - - - 18x40 K9 0.016 4000 - - - - - - - - Impedance Rated ripple current ( max.) (mArms) 0.131 0.097 0.077 0.069 0.066 - - - 1070 1350 1740 1940 2120 - - - 80 Casing symbol Impedance 100 16x20 16x25 16x35.5 16x40 18x40 - - - Casing symbol J5 J6 J8 J9 K9 - - - (Note) Rated ripple current : 125, 100kHz , Impedance : 20, 100kHz NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. 123 CAT.No.2013/2014E Miniature Aluminum Electrolytic Capacitors 5600 Rated voltage (V) DxL (mm) 12.5x20 16x16 12.5x25 16x25 18x20 12.5x30 16x20 12.5x35 16x31.5 18x25 12.5x40 16x25 16x31.5 16x35.5 18x25 5 6 J4 - 12.5x25 16x20 18x16 (mArms) - - 2200 ( max.) Case - 1200 12.5x15 Rated ripple current - 12.5x20 12.5x25 16x16 1000 Casing symbol 35 Impedance RQA &8VH0LQLDWXUH/RZ,PSHGDQFH (R) MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS *5((1 &$3 $QWL FOHDQLQJ VROYHQW Y& /RZ= KRXUV 150, High temperature guaranteed. Guarantees 1000 hours at 150. RQA High temperature RKB Marking color : Black print Specifications Item Performance Category temperature range () 40 to 150 20 Tolerance at rated capacitance (%) (20,120Hz) Less than 0.01CV or 4 whichever is larger (after 1 2 minute) C : Rated capacitance (F), V : Rated voltage (V) Leakage current (A) Tangent of loss angle (tan) (20) Rated voltage (V) 10 16 25 35 tan (max.) 0.20 0.16 0.14 0.12 (20,120Hz) 0.02 is added to every 1000F increase over 1000F. Rated voltage (V) Characteristics at high and low temperature Impedance ratio (max.) -40/20 10 16 25 35 4 3 3 3 (120Hz) 1000 hours Test time The initial specified value or less Leakage current Endurance (150) (Applied ripple current) Within 30% to 30% of initial value Percentage of capacitance change 300% or less of the initial specified value Tangent of the loss angle JIS C5101-1, -18 -4 1998 (IEC 60384-1 1992, -4 1985) Applicable standards Outline Drawing Unit : mm Coefficient of Frequency for Rated Ripple Current Frequency (Hz) Vent Reasin covered d0.05 copper clad steel wire (tinned) 220 to 330 470 to 1000 2200 to 10000 F0.5 D0.5max. Miniature Aluminum Electrolytic Capacitors Shelf life (150) L max. 15min. Part numbering system (example : 35V1000F) 5 min. RQA D F d 10 5.0 0.6 2.0 12.5 5.0 0.6 2.0 16 7.5 0.8 2.0 V 35 Rated voltage symbol Series code 102 M 6 Rated capacitance symbol Capacitance tolerance symbol Casing symbol Taping(Forming) symbol 18 7.5 0.8 2.0 Standard Ratings Rated voltage (V) Rated capacitance () Item 10 Case DxL (mm) Casing symbol 16 Rated ripple current Case (mArms) DxL (mm) Casing symbol 25 Rated ripple current Case (mArms) DxL (mm) Casing symbol 35 Rated ripple current Case (mArms) DxL (mm) Casing symbol Rated ripple current (mArms) 220 10x14 H3 510 10x14 H3 510 330 10x17 H3 660 10x17 H4 660 470 1000 10x17 H4 510 10x22 H5 820 10x22 H5 820 10x22 H5 820 10x22 H5 820 12.5x27 6 1200 12.5x27 6 1200 2200 12.5x22 5 1000 12.5x27 6 1000 16x27 J6 1370 16x27 J6 1370 3300 12.5x22 5 1280 16x27 J6 1200 16x37.5 J8 1720 18x33.5 K7 1670 16x33.5 J7 1370 18x37.5 K8 1790 18x42 K9 1870 4700 10000 16x27 J6 1370 18x37.5 K8 1790 (Note) Rated ripple current : 150 , 100kHz CAT.No.2013/2014E 124 NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. (R) &8VH0LQLDWXUH/RZ,PSHGDQFH RKB MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS *5((1 &$3 Y& /RZ= KRXUV $QWL FOHDQLQJ VROYHQW High temperature guaranteed and low ESR series for automotive. Guarantees 3000 hours at 135. (10 : 2000 hours) RKB High temperature RKD Marking color : Black print Specifications Item Performance Category temperature range () 40 to 135 20 Tolerance at rated capacitance (%) (20,120Hz) Less than 0.01CV or 4 whichever is larger (after 1 2 minute) C : Rated capacitance (F), V : Rated voltage (V) Leakage current (A) Rated voltage (V) tan (max.) Tangent of loss angle (tan) 10 0.20 16 0.16 25 0.14 (20) 35 0.12 (20,120Hz) 0.02 is added to every 1000F increase over 1000F. Rated voltage (V) Impedance ratio -40/20 (max.) Characteristics at high and low temperature 10 16 25 35 4 3 3 3 (120Hz) 3000 hours (10 : 2000 hours) The initial specified value or less Within 30% to 30% of initial value 300% or less of the initial specified value Test time Leakage current Percentage of capacitance change Tangent of the loss angle Endurance (135) (Applied ripple current) Test time :1000 hours; other items are the same as those for the endurance. Voltage application treatment Shelf life (135) JIS C5101-1, -4 -18 1998 (IEC 60384-1 1992, -4 1985) Applicable standards Frequency (Hz) Rated capacitance (F) 220 to 330 470 to 1000 1200 to 6800 d0.05 copper clad steel wire (tinned) Reasin covered F0.5 D0.5max. Vent Coefficient of Frequency for Rated Ripple Current Unit : mm L max. 15min. D F d 10 5.0 0.6 2.0 12.5 5.0 0.6 2.0 5 min. 16 7.5 0.8 2.0 5060 120 1k 0.50 0.60 0.68 0.85 0.88 0.90 0.95 0.96 0.98 10k100k 1 1 1 Part numbering system (example : 10V1000F) RKB 18 7.5 0.8 2.0 V 10 Rated voltage symbol Series code 102 M Rated capacitance symbol Capacitance tolerance symbol H5 # Taping(Forming) symbol Casing symbol Standard Ratings 10 Rated voltage (V) Rated capacitance () 220 330 470 1000 Item 16 ESR ( max.) Rated ripple current Case DxL (mm) Casing symbol (mArms) DxL (mm) H3 0.098 725 Case 10x12.5 10x12.5 H3 0.098 725 25 Casing symbol ESR ( max.) Rated ripple current Case (mArms) DxL (mm) 10x12.5 H3 0.098 725 10x12.5 H3 0.098 725 10x16 H4 0.075 951 (mArms) DxL (mm) 10x12.5 H3 0.098 725 10x12.5 H3 0.098 10x16 H4 10x16 H4 10x20 Rated ripple current Casing symbol ESR ( max.) 10x12.5 H3 0.098 10x16 H4 0.075 951 725 10x16 H4 0.075 951 0.075 951 10x20 H5 0.057 1130 0.075 951 10x20 H5 0.057 1130 H5 0.057 1130 12.5x20 5 0.040 1550 (mArms) 725 H5 0.057 1130 10x20 H5 0.057 1130 12.5x20 5 0.040 1550 12.5x25 6 0.032 1880 0.059 1130 12.5x20 5 0.040 1550 12.5x25 6 0.032 1880 16x25 J6 0.024 2550 12.5x20 5 0.040 1550 12.5x30 7 0.029 2160 16x20 J5 0.032 2020 12.5x35 8 0.023 2580 J7 0.020 3040 12.5x25 6 0.032 1880 12.5x40 9 0.020 2920 16x20 J5 0.032 2020 16x25 J6 0.024 2550 12.5x30 7 0.029 2160 16x31.5 J7 0.020 3040 1500 1800 12.5x25 6 0.032 1880 12.5x25 6 0.032 1880 16x20 J5 0.032 2020 16x25 J6 0.024 2550 16x25 J6 0.024 2550 16x31.5 J7 0.020 3040 18x20 K5 0.029 2320 18x25 K6 0.022 2880 16x31.5 J7 0.020 3040 16x35.5 J8 0.019 3280 18x31.5 4700 Case 4 3300 Rated ripple current 10x20 2700 ESR ( max.) 12.5x15 1200 2200 35 Casing symbol 16x31.5 16x25 J6 0.024 2550 16x35.5 J8 0.019 3280 12.5x35 8 0.023 2580 16x35.5 J8 0.019 3280 16x25 J6 0.024 2550 18x31.5 K7 0.018 3410 12.5x40 9 0.020 2920 16x40 J9 0.017 3630 16x31.5 J7 0.020 3040 18x35.5 K8 0.017 3710 16x35.5 J8 0.019 3280 4000 18x25 K6 0.022 2880 K7 0.018 3410 18x31.5 K7 0.018 3410 18x40 K9 0.016 5600 16x40 J9 0.017 3630 6800 18x40 K9 0.016 4000 (Note) Rated ripple current : 135 , 100kHz, ESR : 20 , 100kHz NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. 125 CAT.No.2013/2014E Miniature Aluminum Electrolytic Capacitors Outline Drawing RLB /RZ/HDNDJH&XUUHQW&DSDFLWRUV (R) MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS *5((1 &$3 Low leakage current (after 1 minute) : 0.006CV or 0.5 (A). Marking color : White print on a blue sleeve Specifications Item Performance Category temperature range () -40 to 85 20 Less than 0.006CV or 0.5 whichever is larger (after 1 minute) Less than 0.002CV or 0.3 whichever is larger (after 2 minutes), C : Rated capacitance (F) ; V : Rated voltage (V) Tolerance at rated capacitance (%) Leakage current (A) Rated voltage (V) More than 1F tan (max.) 1F or less Tangent of loss angle (tan) 6.3 0.20 0.06 10 0.17 0.06 16 0.13 0.06 25 0.10 0.06 (20,120Hz) (20) 35 0.10 0.06 50 0.08 0.06 (20,120Hz) Rated voltage (V) -25/20 -40/20 Characteristics at high and low temperature 6.3 4 8 Impedance ratio (max.) 10 3 6 16 2 4 25 2 4 35 2 3 50 2 3 (120Hz) Test time Leakage current Percentage of capacitance change Tangent of the loss angle Endurance (85) (Applied ripple current) Shelf life (85) Applicable standards 1000 hours The initial specified value or less Within 20% of initial value 150% or less of the initial specified value Test time : 1000 hours ; other items are the same as those for the endurance. Voltage application treatment JIS C5101-1, -4 1998 (IEC 60384-1 1992, -4 1985) Outline Drawing Unit : mm Coefficient of Frequency for Rated Ripple Current Rated voltage (V) Sleeve d0.05 copper clad steel wire (tinned) 5 2.0 0.5 6.3 2.5 0.5 8 3.5 0.6 10 5.0 0.6 35 to 50 RLB 12.5 5.0 0.6 16 7.5 0.8 V 10 Rated voltage symbol Series code 18 7.5 0.8 1k 10k100k 1 1 1 1 1.1 1.5 1.2 1.6 1.2 1.7 1.3 1.9 # 102 M 6 Rated capacitance symbol Capacitance tolerance symbol Casing symbol Taping(Forming) symbol Casing symbol 2.0 (10,16L or less : 1.5) 1.5 120 0.8 0.8 0.8 0.8 Part numbering system (example : 10V1000F) 5 min. 15min. 5060 All CV value 1000 1000< All CV value 6.3 to 10 F0.5 L max. D F d Frequency (Hz) CV (FxV) 16 to 25 D0.5max. Miniature Aluminum Electrolytic Capacitors Vent (except 5) Case DxL (mm) 5x11 6.3x11 8x11.5 Casing symbol E3 F3 G3 Case 10x12.5 10x16 10x20 Casing symbol H3 H4 H5 DxL (mm) Case DxL (mm) 12.5x20 12.5x25 16x25 Casing symbol 5 6 J6 Case DxL (mm) 16x31.5 16x35.5 18x35.5 18x40 Casing symbol J7 J8 K8 K9 Standard Ratings Rated voltage (V) 6.3 10 16 25 35 50 Case Rated ripple current Case Rated ripple current Case Rated ripple current Case Rated ripple current Case Rated ripple current Case Rated ripple current DxL (mm) (mArms) DxL (mm) (mArms) DxL (mm) (mArms) DxL (mm) (mArms) DxL (mm) (mArms) DxL (mm) (mArms) 1 5x11 20 2.2 5x11 26 3.3 5x11 32 4.7 6.3x11 43 10 5x11 543 22 5x11 56 6.3x11 74 33 6.3x11 79 6.3x11 90 47 6.3x11 94 8x11.5 127 100 160 10x12.5 220 Item Rated capacitance (F) 8x11.5 5x11 34 5x11 34 6.3x11 57 6.3x11 57 8x11.5 75 99 8x11.5 99 10x12.5 131 8x11.5 121 10x12.5 144 10x16 176 10x12.5 172 10x12.5 172 10x16 210 10x16 270 10x20 300 12.5x20 380 8x11.5 220 10x12.5 260 10x16 350 10x20 390 12.5x20 510 12.5x25 550 16x25 720 330 10x16 350 10x20 460 12.5x20 550 12.5x25 680 16x25 790 16x31.5 970 16x25 940 16x25 940 16x35.5 1210 470 10x20 460 12.5x20 570 12.5x25 650 1000 12.5x25 840 12.5x25 910 16x25 1210 2200 16x25 1440 18x35.5 2200 16x31.5 1710 16x35.5 1580 18x35.5 1690 (Note) Rated ripple current : 85, 120Hz CAT.No.2013/2014E 126 NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. (R) ALUMINUM ELECTROLYTIC CAPACITORS /DUJH&DSDFLWDQFH $OXPLQXP(OHFWURO\WLF&DSDFLWRUV Large Capacitance Aluminum Electrolytic Capacitors NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. 127 CAT.No.2013/2014E LA5 *5((1 &$3 3&%6QDS,Q0LQLDWXUL]HG&DSDFLWRUV (R) LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS 20mm-tall products for every diameter of 22 to 35 are now offered in series. As many as 4 case sizes available for the same rating. Miniaturized, High ripple /$ Miniaturized, High ripple, Long life /$ /$ Marking color : White print on a black sleeve Specifications Item Performance Category temperature range () -40 to 85 (450V is at -25 to 85) 20 Less than 0.01CV or 1.5mA whichever is smaller (after 5 minutes) C : Rated capacitance (F) ; V : Rated voltage (V) Tolerance at rated capacitance (%) Leakage current (A) Rated voltage (V) tan (max.) Rated voltage (V) Tangent of loss angle D tan (max.) 22 to 30 35 Rated voltage (V) -25/20 -40/20 Characteristics at high and low temperature Impedance ratio (max.) 10 0.80 16 0.60 25 0.50 160 to 250 315 to 450 0.10 0.15 0.15 0.15 10 5 18 16 to 35 4 15 35 0.40 50 0.30 (20,120Hz) (20) 63 to 100 0.20 (20,120Hz) 50 to 100 3 10 160 to 200 3 6 250 to 400 4 8 450 4 (120Hz) Endurance (85) (Applied ripple current) Shelf life (85) Test time Leakage current Percentage of capacitance change Tangent of the loss angle 2000 hours The initial specified value or less Within 20% of initial value 200% or less of the initial specified value Test time Leakage current Percentage of capacitance change Tangent of the loss angle 1000 hours The initial specified value or less Within 15% of initial value 150% or less of the initial specified value Voltage application treatment JIS C5101-1, -4 1998 (IEC 60384-1 1992, -4 1985) Applicable standards Outline Drawing Unit : mm 22 Sleeve 10 1.50.1 () Negative terminal indicated by cross notching L2max. 5.4 Markings 4.7 0.9 D1max. 1 0. 10 Large Capacitance Aluminum Electrolytic Capacitors Lug terminal details Thickness : 0.8t 0.90.1 2.1 (For 4.00.5) Position of PC board holes 4.00.5 Vent 3.30.1 Three terminals type 100.1 2.5 2-2 4.750.1 Coefficient of Frequency for Rated Ripple Current Frequency (Hz) Part numbering system (example : 400V220F) LA5 Series code 400 Rated voltage symbol V 221 M Rated capacitance symbol Capacitance tolerance symbol S43 # Casing symbol Rated voltage (V) 100 or less 160 to 250 315 or more B Optional symbol 50 120 1k 10k 20k 0.95 0.87 0.80 1 1 1 1.10 1.11 1.14 1.15 1.18 1.19 1.15 1.20 1.20 In the case of three terminals type, a series name is "LT5". CAT.No.2013/2014E 128 NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. (R) LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS LA5 6WDQGDUG5DWLQJV Rated voltage (V) Item Case Casing symbol DxL (mm) 10 Rated capacitance ESR 16 Rated ripple current Rated capacitance ESR 25 Rated ripple current Rated capacitance ESR 35 Rated ripple current Rated capacitance ESR 50 Rated ripple current Rated capacitance ESR 63 Rated ripple current Rated capacitance ESR 80 Rated ripple current Rated capacitance ESR 100 Rated ripple current Rated capacitance ESR Rated ripple current F Arms F ArmsF ArmsF ArmsF ArmsF ArmsF ArmsF Arms 22x20 S21 8200 0.101 2.0 5600 0.118 1.9 3900 0.128 1.8 2700 0.154 1.6 1800 0.184 1.6 1500 0.166 1.7 1000 0.249 1.5 560 0.444 1.3 22x25 S22 12000 0.069 2.5 8200 0.081 2.4 5600 0.089 2.3 3900 0.106 2.1 2700 0.123 2.1 2200 0.113 2.2 1500 0.166 1.9 820 0.303 1.7 22x30 S23 15000 0.055 3.0 12000 0.055 3.0 8200 0.061 2.8 4700 0.088 2.4 3900 0.085 2.6 2700 0.092 2.5 1800 0.138 2.2 1200 0.207 2.1 22x35 S24 22000 0.038 3.7 15000 0.044 3.4 10000 0.050 3.2 6800 0.061 2.9 4700 0.071 3.1 3300 0.075 2.9 2200 0.113 2.5 1500 0.166 2.5 22x40 S25 18000 0.037 3.9 12000 0.041 3.7 8200 0.051 3.3 5600 0.059 3.4 3900 0.064 3.3 2700 0.092 2.8 1800 0.138 2.8 22x45 S26 27000 0.031 4.3 4700 0.053 3.7 3300 0.075 3.2 2200 0.113 3.2 22x50 S27 33000 0.025 4.9 22000 0.030 4.5 15000 0.033 4.3 10000 0.041 3.9 6800 0.049 3.9 5600 0.044 4.1 3900 0.064 3.6 25x20 S31 12000 0.069 2.5 8200 0.081 2.4 5600 0.089 2.2 3900 0.106 2.0 2700 0.123 2.1 1800 0.138 2.0 1200 0.207 1.7 820 0.303 1.7 25x25 S32 18000 0.046 3.2 12000 0.055 2.9 8200 0.061 2.8 5600 0.074 2.6 3900 0.085 2.6 2700 0.092 2.0 1800 0.138 2.2 1200 0.207 2.1 25x30 S33 22000 0.038 3.7 15000 0.044 3.4 10000 0.050 3.2 6800 0.061 2.9 4700 0.071 3.0 3900 0.064 3.2 2200 0.113 2.5 1500 0.166 2.5 25x35 S34 27000 0.031 4.2 18000 0.037 3.9 12000 0.041 3.7 8200 0.051 3.3 5600 0.059 3.4 4700 0.053 3.6 3300 0.075 3.1 1800 0.138 2.8 25x40 S35 33000 0.025 4.8 22000 0.030 4.4 15000 0.033 4.2 10000 0.041 3.8 6800 0.049 3.8 5600 0.044 4.0 3900 0.064 3.5 2200 0.113 3.2 25x45 S36 39000 0.021 5.4 27000 0.025 5.0 18000 0.028 4.7 12000 0.035 4.3 8200 0.040 4.3 6800 0.037 4.6 2700 0.092 2.9 25x50 S37 47000 0.018 6.0 22000 0.023 5.4 15000 0.028 4.9 10000 0.033 4.9 4700 0.053 4.0 3300 0.075 4.1 30x20 S41 18000 0.046 3.3 12000 0.055 3.0 8200 0.061 2.9 5600 0.074 2.6 3900 0.085 2.7 2700 0.092 2.6 1800 0.138 2.2 1200 0.207 2.2 30x25 S42 27000 0.031 4.2 18000 0.037 3.9 12000 0.041 3.7 8200 0.051 3.3 5600 0.059 3.4 3900 0.064 3.3 2700 0.092 2.9 1800 0.138 2.8 30x30 S43 33000 0.025 4.9 22000 0.030 4.4 15000 0.033 4.3 10000 0.041 3.8 6800 0.049 3.9 5600 0.044 4.1 3900 0.064 3.6 2200 0.113 3.2 30x35 S44 39000 0.021 5.5 27000 0.025 5.1 18000 0.028 4.8 12000 0.035 4.3 8200 0.040 4.4 6800 0.037 4.6 4700 0.053 4.0 2700 0.092 3.7 30x40 S45 47000 0.018 6.1 33000 0.020 5.8 22000 0.023 5.5 15000 0.028 5.0 10000 0.033 5.0 8200 0.030 5.2 5600 0.044 4.5 3300 0.075 4.2 30x45 S46 56000 0.015 6.9 39000 0.017 6.4 27000 0.018 6.2 18000 0.023 5.6 12000 0.028 5.6 10000 0.025 5.9 6800 0.037 5.1 3900 0.064 4.7 30x50 S47 68000 0.012 7.7 47000 0.014 7.2 33000 0.015 7.0 22000 0.019 6.3 15000 0.022 6.4 4700 0.053 5.2 35x20 S51 22000 0.038 3.9 15000 0.044 3.7 10000 0.050 3.5 6800 0.061 3.1 4700 0.071 3.2 3900 0.064 3.4 2700 0.092 3.0 1500 0.166 2.7 35x25 S52 33000 0.025 5.0 22000 0.030 4.6 15000 0.033 4.4 10000 0.041 4.0 6800 0.049 4.0 5600 0.044 4.2 3900 0.064 3.7 2200 0.113 3.4 35x30 S53 47000 0.018 6.2 33000 0.020 5.8 22000 0.023 5.5 15000 0.028 5.0 10000 0.033 5.0 6800 0.037 4.8 4700 0.053 4.2 3300 0.075 4.3 35x35 S54 56000 0.015 7.0 39000 0.017 6.5 27000 0.018 6.2 18000 0.023 5.7 12000 0.028 5.7 8200 0.030 5.5 5600 0.044 4.7 3900 0.064 4.8 35x40 S55 68000 0.012 7.9 47000 0.014 7.4 33000 0.015 7.2 22000 0.019 6.4 15000 0.022 6.5 10000 0.025 6.2 6800 0.037 5.3 4700 0.053 5.4 35x45 S56 82000 0.010 8.9 56000 0.012 8.2 39000 0.013 8.0 18000 0.018 7.3 12000 0.021 6.9 8200 0.030 6.0 5600 0.044 6.0 35x50 S57 27000 0.015 7.4 15000 0.017 7.9 10000 0.025 6.8 Rated ripple current Rated capacitance Rated ripple current Rated capacitance Rated ripple current Rated capacitance Rated ripple current Rated capacitance Rated ripple current Rated capacitance Rated ripple current Rated capacitance Rated voltage (V) Item Case Casing symbol DxL (mm) 160 Rated capacitance ESR 180 ESR 200 ESR 250 ESR 315 ESR 350 ESR 400 Rated ripple current Rated capacitance ESR 450 ESR Rated ripple current F ArmsF ArmsF ArmsF ArmsF ArmsF ArmsF ArmsF Arms S21 270 0.614 1.2 220 0.754 1.1 180 0.922 1.0 150 1.106 0.94 100 2.488 0.78 68 3.659 0.61 56 4.443 0.54 47 5.294 0.49 22x25 S22 390 0.425 1.5 330 0.503 1.4 270 0.614 1.3 220 0.754 1.2 150 1.659 1.0 100 2.488 0.78 82 3.034 0.69 68 3.659 0.62 22x30 S23 560 0.296 1.9 470 0.353 1.8 390 0.425 1.6 270 0.614 1.4 180 1.382 1.1 150 1.659 1.0 120 2.073 0.86 82 3.034 0.71 22x35 S24 680 0.244 2.2 560 0.296 2.0 470 0.353 1.9 330 0.503 1.6 220 1.131 1.3 180 1.382 1.1 150 1.659 1.0 100 2.488 0.82 22x40 S25 820 0.202 2.5 680 0.244 2.3 560 0.296 2.1 390 0.425 1.8 270 0.922 1.5 220 1.131 1.3 180 1.382 1.1 120 2.073 0.92 22x45 S26 820 0.202 2.6 680 0.244 2.4 470 0.353 2.0 330 0.754 1.7 220 1.131 1.3 150 1.659 1.1 22x50 S27 1000 0.166 2.9 820 0.202 2.6 560 0.296 2.2 270 0.922 1.5 180 1.382 1.2 25x20 S31 390 0.425 1.5 330 0.503 1.4 270 0.614 1.3 180 0.922 1.1 120 2.073 0.88 100 2.488 0.77 82 3.034 0.69 56 4.443 0.57 25x25 S32 560 0.296 1.9 470 0.353 1.8 390 0.425 1.6 270 0.614 1.4 180 1.382 1.1 150 1.659 0.99 120 2.073 0.87 82 3.034 0.72 25x30 S33 680 0.244 2.2 560 0.296 2.0 560 0.296 2.0 390 0.425 1.7 270 0.922 1.4 180 1.382 1.1 150 1.659 1.0 120 2.073 0.91 25x35 S34 820 0.202 2.5 680 0.244 2.3 680 0.244 2.3 470 0.353 2.0 330 0.754 1.7 220 1.131 1.3 180 1.382 1.1 150 1.659 1.0 25x40 S35 1000 0.166 2.8 820 0.202 2.6 820 0.202 2.6 560 0.296 2.2 390 0.638 1.8 270 0.922 1.5 220 1.131 1.3 180 1.382 1.2 25x45 S36 1200 0.138 3.2 1000 0.166 2.9 680 0.244 2.5 330 0.754 1.7 270 0.922 1.5 25x50 S37 1500 0.111 3.6 1200 0.138 3.3 1000 0.166 3.0 470 0.529 2.1 390 0.638 1.9 330 0.754 1.7 220 1.131 1.4 30x20 S41 560 0.296 2.0 470 0.353 1.8 390 0.425 1.7 270 0.614 1.4 180 1.382 1.2 150 1.659 1.0 120 2.073 0.93 82 3.034 0.77 30x25 S42 820 0.202 2.5 680 0.244 2.3 560 0.296 2.1 390 0.425 1.8 270 0.922 1.5 220 1.131 1.3 180 1.382 1.2 120 2.073 0.97 30x30 S43 1000 0.166 2.9 820 0.202 2.6 820 0.202 2.7 560 0.296 2.3 390 0.638 1.9 270 0.922 1.5 220 1.131 1.4 180 1.382 1.2 30x35 S44 1200 0.138 3.3 1200 0.138 3.3 1000 0.166 3.0 680 0.244 2.6 470 0.529 2.1 330 0.754 1.7 270 0.922 1.6 220 1.131 1.4 30x40 S45 1500 0.111 3.7 1200 0.138 3.4 820 0.202 2.9 560 0.444 2.4 390 0.638 1.9 330 0.754 1.8 270 0.922 1.6 30x45 S46 1800 0.092 4.2 1500 0.111 3.9 1000 0.166 3.3 680 0.366 2.7 470 0.529 2.1 390 0.638 2.0 30x50 S47 2200 0.075 4.7 1800 0.092 4.3 1500 0.111 4.0 1200 0.138 3.7 560 0.444 2.4 470 0.529 2.2 330 0.754 1.8 35x20 S51 680 0.366 2.3 560 0.444 2.1 560 0.444 2.1 390 0.638 1.8 270 0.922 1.5 180 1.382 1.2 150 1.659 1.2 120 2.073 1.0 35x25 S52 1000 0.249 2.9 820 0.303 2.6 820 0.303 2.7 560 0.444 2.3 390 0.638 1.9 270 0.922 1.6 220 1.131 1.5 180 1.382 1.3 35x30 S53 1500 0.166 3.6 1200 0.207 3.3 1000 0.249 3.0 680 0.366 2.6 470 0.529 2.2 390 0.638 1.9 330 0.754 1.8 220 1.131 1.5 35x35 S54 1800 0.138 4.1 1500 0.166 3.8 1200 0.207 3.4 820 0.303 2.9 560 0.444 2.5 470 0.529 2.2 390 0.638 2.1 270 0.922 1.7 35x40 S55 2200 0.113 4.7 1800 0.138 4.3 1500 0.166 3.9 1000 0.249 3.3 680 0.366 2.8 560 0.444 2.5 470 0.529 2.3 330 0.754 1.9 35x45 S56 2200 0.113 4.8 1800 0.138 4.4 1200 0.207 3.7 820 0.303 3.1 680 0.366 2.8 560 0.444 2.6 390 0.638 2.2 35x50 S57 2700 0.092 5.4 2200 0.113 5.0 1500 0.166 4.2 1000 0.249 3.5 680 0.366 2.9 470 0.529 2.4 (Note) ESR : 20, 120Hz ; Rated ripple current : 85, 120Hz NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. 129 CAT.No.2013/2014E Large Capacitance Aluminum Electrolytic Capacitors 22x20 LAT 8OWUD0LQLDWXUL]HG+LJK5HOLDELOLW\+LJK5LSSOH&DSDFLWRUV (R) LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS *5((1 &$3 Y& KRXUV Best suited as input filters for various power supplies. Guarantees 2000 hours at 105. Miniaturized, high-ripple LAT LAH Marking color : White print on a black sleeve Specifications Performance -25 to 105 20 Item Category temperature range ( C) Tolerance at rated capacitance (%) Leakage current (A) (20,120Hz) (20) Less than 0.02CV or 3mA whichever is smaller (after 5 minutes) C : Rated capacitance (F) ; V : Rated voltage (V) Rated voltage (V) tan (max.) Tangent of loss angle (tan) 160 to 250 0.15 315 to 500 0.20 (20,120Hz) Percentage of capacitance change (%) Characteristics at high and low temperature Impedance ratio (max.) Within 30% of the value at 20 4 25 25/20 (120Hz) Endurance (105) (Applied ripple current) Shelf life (105) Test time Leakage current Percentage of capacitance change Tangent of the loss angle 2000 hours The initial specified value or less Within 20% of initial value 200% or less of the initial specified value Test time Leakage current Percentage of capacitance change Tangent of the loss angle 1000 hours The initial specified value or less Within 15% of initial value 150% or less of the initial specified value Voltage application treatment Applicable standards JIS C5101-1, -4 1998 (IEC 60384-1 1992, -4 1985) Outline Drawing Unit : mm 22 Sleeve 10 0. 10 Lug terminal details Thickness : 0.8t 0.90.1 Large Capacitance Aluminum Electrolytic Capacitors () Negative terminal indicated by cross notching L2max. Vent 5.4 1.50.1 4.7 0.9 D1max. 1 Markings 2.1 (For 4.0 0.5) Position of PC board holes 4.00.5 3.30.1 Three terminals type 100.1 2.5 2-2 4.750.1 Coefficient of Frequency for Rated Ripple Current Frequency (Hz) Part numbering system (example : 200V470F) LAT 200 V Series code Rated voltage symbol 471 Rated capacitance symbol M Capacitance tolerance symbol S24 # Casing symbol Rated voltage (V) 160 to 250 315 or more B 50 120 1k 10k 30k 0.87 0.80 1 1 1.11 1.14 1.18 1.19 1.20 1.20 Optional symbol In the case of three terminals type, a series name is "LTT". The electric characteristics are described on page 174. CAT.No.2013/2014E 130 NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. (R) LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS LAT Standard Ratings Rated voltage(V) Item Case Casing DxL mm symbol 22x20 S21 22x25 S22 22x30 S23 22x35 S24 22x40 S25 22x45 S26 22x50 S27 25x20 S31 25x25 S32 25x30 S33 25x35 S34 25x40 S35 25x45 S36 25x50 S37 30x20 S41 30x25 S42 30x30 S43 30x35 S44 30x40 S45 30x45 S46 30x50 S47 35x20 S51 35x25 S52 35x30 S53 35x35 S54 35x40 S55 35x45 S56 35x50 S57 160 Case Casing DxL mm symbol 22x20 S21 22x25 S22 22x30 S23 22x35 S24 22x40 S25 S26 S27 25x20 S31 25x25 S32 25x30 S33 25x35 S34 25x40 S35 25x45 S36 25x50 S37 30x20 S41 30x25 S42 30x30 S43 30x35 S44 30x40 S45 30x45 S46 30x50 S47 35x20 S51 35x25 S52 35x30 S53 35x35 S54 35x40 S55 35x45 S56 35x50 S57 250 315 350 Rated capacitance Rated ripple current Rated capacitance Rated ripple current Rated capacitance Rated ripple current Rated capacitance Rated ripple current Rated capacitance Rated ripple current F Arms F Arms F Arms F Arms F Arms F Arms 220 390 470 560 680 820 1000 270 470 680 820 1000 1200 1500 390 680 1000 1200 1500 1800 2200 560 1000 1500 1800 2200 2200 2700 0.70 1.30 1.47 1.58 1.71 2.00 2.20 0.84 1.55 1.70 2.00 2.20 2.45 2.86 1.13 1.82 2.20 2.44 2.82 3.31 3.81 1.49 2.20 2.50 2.92 3.34 3.48 3.97 180 330 390 470 560 680 820 220 390 560 680 820 1000 1200 330 560 820 1000 1200 1500 1800 470 820 1200 1500 1800 2200 2200 0.63 1.20 1.30 1.50 1.62 1.70 2.00 0.76 1.35 1.53 1.74 2.00 2.23 2.51 1.04 1.67 2.00 2.24 2.52 2.89 3.30 1.37 2.00 2.50 2.89 3.05 3.46 3.60 150 270 390 470 560 680 820 180 390 560 680 820 820 1000 330 560 820 1000 1200 1500 1500 470 820 1000 1200 1500 1800 2200 0.58 1.10 1.31 1.50 1.56 1.74 1.99 0.68 1.35 1.53 1.74 1.95 2.04 2.30 1.04 1.67 2.00 2.24 2.52 2.91 3.03 1.37 2.00 2.30 2.65 3.08 3.47 3.78 120 220 270 330 390 470 560 150 270 330 470 560 680 680 220 390 560 680 820 1000 1000 330 560 680 820 1000 1200 1500 0.52 1.00 1.14 1.26 1.49 1.57 1.67 0.62 1.18 1.30 1.57 1.79 1.81 1.84 0.92 1.31 1.79 2.00 2.16 2.37 2.47 1.14 1.68 1.75 2.00 2.30 2.43 2.96 68 120 150 180 220 270 330 100 180 220 270 330 390 470 150 270 330 390 470 560 680 180 330 470 560 680 820 - 0.39 0.75 0.82 0.91 1.02 1.16 1.20 0.51 0.90 1.00 1.10 1.20 1.30 1.40 0.70 1.10 1.20 1.30 1.40 1.50 1.70 0.83 1.20 1.40 1.50 1.70 2.00 - 56 100 120 150 180 220 270 82 150 180 220 270 330 390 120 220 270 330 390 470 560 150 270 390 470 560 680 820 0.35 0.51 0.61 0.73 0.84 0.98 1.09 0.46 0.68 0.80 0.99 1.09 1.20 1.28 0.69 0.99 1.09 1.20 1.28 1.37 1.54 0.76 1.09 1.28 1.37 1.54 1.82 2.08 Rated capacitance Rated ripple current Rated capacitance Rated ripple current Rated capacitance Rated ripple current F Arms F Arms F Arms 56 68 82 100 100 120 120 150 150 180 180 220 220 270 68 82 120 150 150 180 180 220 220 270 270 330 330 390 82 100 150 180 220 270 270 330 330 390 390 470 470 560 120 150 220 270 330 390 390 470 470 560 560 680 680 820 0.39 0.43 0.64 0.56 0.69 0.73 0.75 0.73 0.82 0.84 0.90 0.99 1.05 1.16 0.46 0.51 0.75 0.68 0.84 0.80 0.94 1.04 1.07 1.11 1.20 1.29 1.32 1.43 0.52 0.57 0.82 0.90 1.06 1.09 1.21 1.34 1.39 1.51 1.55 1.65 1.69 1.84 0.75 0.84 1.08 1.20 1.20 1.30 1.54 1.69 1.74 1.82 1.85 1.95 2.03 2.33 56 - 68 82 100 - 120 150 150 180 180 220 220 - 56 - 100 120 150 150 180 - 220 - 270 - 270 330 82 100 150 180 220 220 270 - 330 330 330 390 390 470 120 150 220 - 270 330 390 - 470 - 470 560 560 680 0.35 - 0.52 0.47 0.56 - 0.65 0.73 0.77 0.84 0.89 0.98 1.03 - 0.38 - 0.71 0.61 0.82 0.82 0.96 - 1.00 - 1.17 - 1.22 1.35 0.52 0.57 0.83 0.72 1.12 0.86 1.24 - 1.18 1.18 1.46 1.35 1.58 1.55 0.72 0.67 1.04 - 1.26 1.15 1.54 - 1.59 - 1.64 1.79 2.02 2.03 22 27 33 39 47 56 68 - 82 - 100 - 120 - - - - - 68 - 82 - 100 120 150 - 180 - - - - - 100 - 120 - 150 - 180 - 220 270 - - - - 120 - 150 - 220 270 330 - 390 - 0.24 0.28 0.32 0.37 0.41 0.47 0.54 - 0.62 - 0.67 - 0.77 - - - - - 0.54 - 0.62 - 0.67 0.74 0.82 - 0.98 - - - - - 0.67 - 0.77 - 0.85 - 1.01 - 1.12 1.25 - - - - 0.80 - 0.85 - 1.12 1.25 1.36 - 1.54 - 400 450 500 Large Capacitance Aluminum Electrolytic Capacitors 22x45 22x50 200 Rated ripple current Rated voltage(V) Item 180 Rated capacitance (Note) Rated ripple current : 105 , 120Hz NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. 131 CAT.No.2013/2014E LAH *5((1 &$3 0LQLDWXUL]HG+LJK5HOLDELOLW\+LJK5LSSOH&DSDFLWRUV (R) LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Y& KRXUV High-reliability, high-ripple capacitors. Guarantees 2000 hours at 105. Miniaturized LAH LAG Marking color : White print on a black sleeve Specifications Performance -40 to 105 (-25 to 105 at 160V or more) 20 Less than 0.02CV or 3mA whichever is smaller (after 5 minutes) C : Rated capacitance (F) ; V : Rated voltage (V) Item Category temperature range ( C) Tolerance at rated capacitance (%) Leakage current (A) Rated voltage (V) tan (max.) Tangent of loss angle (tan) 16 0.50 25 0.40 35 0.35 50 0.30 (20,120Hz) (20) 63 to 100 160 to 250 400 to 450 0.20 0.15 0.20 (20,120Hz) Characteristics at high and low temperature Rated voltage (V) Impedance ratio -25/20 (max.) -40/20 Endurance (105) (Applied ripple current) Test time Leakage current Percentage of capacitance change Tangent of the loss angle 2000 hours The initial specified value or less Within 20% of initial value 200% or less of the initial specified value Test time Leakage current Percentage of capacitance change Tangent of the loss angle 1000 hours The initial specified value or less Within 15% of initial value 150% or less of the initial specified value Shelf life (105) 16 to 100 4 15 160 to 200 4 250 to 400 4 (120Hz) Voltage application treatment Applicable standards JIS C5101-1, -4 1998 (IEC 60384-1 1992, -4 1985) Outline Drawing Unit: mm 22 Sleeve 10 0. 10 Lug terminal details Thickness : 0.8t 0.90.1 5.4 0.9 () Negative terminal indicated by cross notching L2max. 4.7 1.50.1 2.1 (For 4.0 0.5) Position of PC board holes 4.00.5 Vent Three terminals type 100.1 2.5 3.30.1 Large Capacitance Aluminum Electrolytic Capacitors D1max. 1 Markings 2-2 4.750.1 Coefficient of Frequency for Rated Ripple Current Frequency (Hz) Part numbering system (example : 200V470F) LAH Series code 200 Rated voltage symbol V Rated voltage (V) 471 M S33 Rated capacitance symbol Capacitance tolerance symbol Casing symbol 100 or less 160 to 250 315 or more # B Optional symbol 50 120 1k 10k 30k 0.95 0.87 0.80 1 1 1 1.10 1.11 1.14 1.15 1.18 1.19 1.15 1.20 1.20 In the case of three terminals type, a series name is "LTH". CAT.No.2013/2014E 132 NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. (R) LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS LAH Standard Ratings Rated voltage(V) Item Case Casing DxL mm symbol 22x25 S22 22x30 S23 22x35 S24 22x40 S25 22x45 S26 22x50 S27 25x25 S32 25x30 S33 25x35 S34 25x40 S35 25x45 S36 25x50 S37 30x25 S42 30x30 S43 30x35 S44 30x40 S45 30x45 S46 30x50 S47 35x25 S52 35x30 S53 35x35 S54 35x40 S55 35x45 S56 35x50 S57 16 35 50 63 80 100 Rated ripple current Rated capacitance Rated ripple current Rated capacitance Rated ripple current Rated capacitance Rated ripple current Rated capacitance Rated ripple current Rated capacitance Rated ripple current Rated capacitance Rated ripple current F Arms F Arms F Arms F Arms F Arms F Arms F Arms 6800 10000 12000 15000 18000 - 10000 12000 15000 18000 22000 27000 12000 18000 22000 27000 33000 39000 18000 27000 33000 39000 47000 - 1.60 1.99 2.28 2.64 2.98 - 1.99 2.30 2.68 3.04 3.40 3.81 2.38 3.00 3.39 3.83 4.30 4.74 3.10 3.74 4.24 4.72 5.27 - 4700 6800 8200 10000 12000 - 6800 8200 10000 12000 15000 18000 8200 12000 15000 18000 22000 - 12000 15000 22000 - 27000 33000 1.55 1.91 2.14 2.40 2.69 - 1.91 2.16 2.44 2.74 3.15 3.54 2.25 2.70 3.13 3.54 4.24 - 2.80 3.22 3.96 - 4.75 5.39 3300 3900 5600 6800 - 8200 4700 5600 6800 8200 10000 12000 5600 8200 10000 12000 15000 - 8200 12000 15000 18000 - 22000 1.43 1.65 2.02 2.28 - 2.67 1.78 2.04 2.31 2.60 2.92 3.26 2.12 2.56 2.92 3.28 3.74 - 2.78 3.20 3.69 4.16 - 4.92 1800 2700 3300 3900 4700 5600 2700 3300 3900 5600 - 6800 3900 4700 5600 6800 8200 10000 4700 6800 8200 10000 12000 - 1.31 1.70 1.98 2.25 2.56 2.89 1.70 2.00 2.28 2.81 - 3.37 2.22 2.58 2.95 3.39 3.71 4.09 2.67 3.31 3.66 4.07 4.50 - 1200 1800 220 2700 - 3300 1800 2200 2700 3300 3900 4700 2700 3300 3900 4700 5600 6800 3300 4700 5600 6800 8200 10000 1.25 1.52 1.73 1.97 - 2.32 1.52 1.75 1.99 2.27 2.54 2.88 1.93 2.24 2.55 2.90 3.28 3.73 2.41 2.83 3.24 3.71 4.16 4.69 Rated capacitance Rated ripple current Rated capacitance Rated ripple current Rated capacitance Rated ripple current Rated capacitance Rated ripple current Rated capacitance Rated ripple current Rated capacitance Rated ripple current F Arms F Arms F Arms F Arms F Arms F Arms 330 390 470 560 680 820 470 560 680 820 1000 1200 680 820 1000 1200 1500 - 820 1200 1500 - 1800 2200 1.16 1.43 1.52 1.62 1.70 1.81 1.55 1.73 1.81 1.98 2.04 2.12 1.82 1.98 2.14 2.22 2.46 - 1.93 2.40 2.53 - 2.98 3.10 270 330 470 560 - 680 390 470 560 680 820 1000 560 680 820 1000 1200 1500 680 1000 1200 1500 1800 - 1.08 1.30 1.50 1.62 - 1.76 1.35 1.62 1.69 1.72 1.78 1.91 1.67 1.74 1.85 2.01 2.19 2.36 1.92 2.16 2.34 2.56 2.67 - 220 330 390 470 560 680 330 470 560 680 - 820 470 680 820 -- 1000 1200 1000 680 1200 680 820 - 820 1000 1200 1500 1800 1.08 1.30 1.41 1.50 1.58 1.68 1.35 1.47 1.65 1.80 - 1.87 1.56 1.82 1.99 -- 2.17 2.22 2.17 2.22 1.96 2.07 1.96 - 2.07 2.22 2.42 2.59 2.70 180 220 270 330 390 470 220 330 390 470 560 680 330 470 560 680 820 1000 470 560 820 1000 1200 - 0.94 1.10 1.13 1.20 1.26 1.37 1.15 1.30 1.41 1.52 1.59 1.66 1.30 1.36 1.57 1.76 1.83 1.87 1.40 1.56 1.82 1.99 2.10 - 68 82 120 150 -- 180 82 180 120 82 120 150 - 150 180 220 270 120 180 220 270 330 390 180 270 330 390 470 560 0.47 0.56 0.64 0.70 -- 0.78 0.65 0.78 0.70 0.65 0.73 0.70 - 0.73 0.82 0.87 0.94 0.78 0.83 0.86 0.95 1.11 1.15 0.86 0.91 1.13 1.26 1.31 1.50 Rated voltage(V) 160 180 200 250 820 1200 1500 1800 2200 - 1200 1500 2200 - 2700 3300 1800 2200 2700 3300 3900 4700 2200 3300 3900 4700 5600 6800 400 1.11 1.39 1.61 1.83 2.09 - 1.39 1.62 2.01 - 2.43 2.76 1.81 2.10 2.43 2.78 3.12 3.56 2.17 2.71 3.07 3.50 3.87 4.19 560 820 1000 1200 1500 - 820 1000 1200 1500 1800 2200 1200 1500 1800 2200 2700 3300 1500 2200 2700 3300 3900 4700 1.07 1.35 1.54 1.74 1.99 - 1.35 1.56 1.76 2.03 2.28 2.57 1.71 2.00 2.27 2.59 2.94 3.32 2.07 2.52 2.90 3.31 3.69 4.14 450 56 68 82 100 120 150 68 100 120 150 180 220 100 150 180 220 270 330 150 220 270 330 390 470 0.47 0.56 0.64 0.70 0.73 0.78 0.65 0.70 0.73 0.82 0.87 0.94 0.78 0.83 0.86 0.95 1.11 1.15 0.86 0.91 1.13 1.26 1.31 1.50 (Note) Rated ripple current : 105 , 120Hz NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. 133 CAT.No.2013/2014E Large Capacitance Aluminum Electrolytic Capacitors Item Case Casing DxL mm symbol 22x25 S22 22x30 S23 22x35 S24 22x40 S25 22x45 S26 22x50 S27 25x25 S32 25x30 S33 25x35 S34 25x40 S35 25x45 S36 25x50 S37 30x25 S42 30x30 S43 30x35 S44 30x40 S45 30x45 S46 30x50 S47 35x25 S52 35x30 S53 35x35 S54 35x40 S55 35x45 S56 35x50 S57 25 Rated capacitance LAZ *5((1 &$3 +LJK5HOLDELOLW\+LJK5LSSOH/RQJ/LIH&DSDFLWRUV (R) LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Y& KRXUV High-reliability, high-ripple, long life capacitors. Guarantees 3000 hours at 105 C. Long life LAZ LAH Marking color : White print on a black sleeve Specifications Item Performance 40 to 105 (25 to 105 at 160V or more) 20 Less than 0.02CV or 3mA whichever is smaller (after 5 minutes) C : Rated capacitance (F) ; V : Rated voltage (V) Category temperature range () Tolerance at rated capacitance (%) Leakage current (A) Rated voltage (V) tan (max.) Tangent of loss angle (tan) 25 0.40 16 0.50 35 0.35 50 0.30 (20,120Hz) (20) 63 to 100 160 to 250 400 to 450 0.20 0.15 0.20 (20,120Hz) Characteristics at high and low temperature Rated voltage (V) Impedance ratio 25/20 (max.) 40/20 Endurance (105) (Applied ripple current) Test time Leakage current Percentage of capacitance change Tangent of the loss angle 3000 hours The initial specified value or less Within 20% of initial value 200% or less of the initial specified value Test time Leakage current Percentage of capacitance change Tangent of the loss angle 1000 hours The initial specified value or less Within 15% of initial value 150% or less of the initial specified value Shelf life (105) 16 to 100 4 15 160 to 200 4 250 to 400 4 (120Hz) Voltage application treatment Applicable standards JIS C5101-1, -4 1998 (IEC 60384-1 1992, -4 1985) Outline Drawing Unit: mm 22 Sleeve 10 0. 10 Lug terminal details Thickness : 0.8t 0.90.1 0.9 () Negative terminal indicated by cross notching L2max. 4.7 1.50.1 5.4 Large Capacitance Aluminum Electrolytic Capacitors D1max. 1 Markings 2.1 (For 4.00.5) Position of PC board holes 4.00.5 Vent 3.30.1 Three terminals type 100.1 2.5 2-2 4.750.1 Coefficient of Frequency for Rated Ripple Current Frequency (Hz) Part numbering system (example : 200V470F) LAZ Series code 200 Rated voltage symbol V 471 M S33 Rated capacitance symbol Capacitance tolerance symbol Casing symbol Rated voltage (V) # 100 or less 160 to 250 315 or more B Optional symbol 50 120 1k 10k 30k 0.95 0.87 0.80 1 1 1 1.10 1.11 1.14 1.15 1.18 1.19 1.15 1.20 1.20 In the case of three terminals type, a series name is "LTZ". The electric characteristics are described on page 174. CAT.No.2013/2014E 134 NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. (R) LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS LAZ Standard Ratings Rated voltage(V) Item Case Casing DxL mm symbol 22x25 S22 22x30 S23 22x35 S24 22x40 S25 22x45 S26 22x50 S27 25x25 S32 25x30 S33 25x35 S34 25x40 S35 25x45 S36 25x50 S37 30x25 S42 30x30 S43 30x35 S44 30x40 S45 30x45 S46 30x50 S47 35x25 S52 35x30 S53 35x35 S54 35x40 S55 35x45 S56 35x50 S57 16 Case Casing DxL mm symbol 22x20 S21 22x25 S22 S23 22x35 S24 22x40 S25 22x45 S26 22x50 S27 25x20 S31 25x25 S32 25x30 S33 25x35 S34 25x40 S35 25x45 S36 25x50 S37 30x20 S41 30x25 S42 30x30 S43 30x35 S44 30x40 S45 30x45 S46 30x50 S47 35x20 S51 35x25 S52 35x30 S53 35x35 S54 35x40 S55 35x45 S56 35x50 S57 50 63 80 100 Rated capacitance Rated ripple current Rated capacitance Rated ripple current Rated capacitance Rated ripple current Rated capacitance Rated ripple current Rated capacitance Rated ripple current Rated capacitance Rated ripple current F Arms F Arms F Arms F Arms F Arms F Arms F Arms 6800 10000 12000 15000 18000 - 10000 12000 15000 18000 22000 27000 12000 18000 22000 27000 33000 39000 18000 27000 33000 39000 47000 - 1.60 1.99 2.28 2.64 2.98 - 1.99 2.30 2.68 3.04 3.40 3.81 2.38 3.00 3.39 3.83 4.30 4.74 3.10 3.74 4.24 4.72 5.27 - 4700 6800 8200 10000 12000 - 6800 8200 10000 12000 15000 18000 8200 12000 15000 18000 22000 - 12000 15000 22000 - 27000 33000 1.55 1.91 2.14 2.40 2.69 - 1.91 2.16 2.44 2.74 3.15 3.54 2.25 2.70 3.13 3.54 4.24 - 2.80 3.22 3.96 - 4.75 5.39 3300 3900 5600 6800 - 8200 4700 5600 6800 8200 10000 12000 5600 8200 10000 12000 15000 - 8200 12000 15000 18000 - 22000 1.43 1.65 2.02 2.28 - 2.67 1.78 2.04 2.31 2.60 2.92 3.26 2.12 2.56 2.92 3.28 3.74 - 2.78 3.20 3.69 4.16 - 4.92 1800 2700 3300 3900 4700 5600 2700 3300 3900 5600 - 6800 3900 4700 5600 6800 8200 10000 4700 6800 8200 10000 12000 - 1.31 1.70 1.98 2.25 2.56 2.89 1.70 2.00 2.28 2.81 - 3.37 2.22 2.58 2.95 3.39 3.71 4.09 2.67 3.31 3.66 4.07 4.50 - 1200 1800 2200 2700 - 3300 1800 2200 2700 3300 3900 4700 2700 3300 3900 4700 5600 6800 3300 4700 5600 6800 8200 10000 1.25 1.52 1.73 1.97 - 2.32 1.52 1.75 1.99 2.27 2.54 2.88 1.93 2.24 2.55 2.90 3.28 3.73 2.41 2.83 3.24 3.71 4.16 4.69 820 1200 1500 1800 2200 - 1200 1500 2200 - 2700 3300 1800 2200 2700 3300 3900 4700 2200 3300 3900 4700 5600 6800 1.11 1.39 1.61 1.83 2.09 - 1.39 1.62 2.01 - 2.43 2.76 1.81 2.10 2.43 2.78 3.12 3.56 2.17 2.71 3.07 3.50 3.87 4.19 560 820 1000 1200 1500 - 820 1000 1200 1500 1800 2200 1200 1500 1800 2200 2700 3300 1500 2200 2700 3300 3900 4700 1.07 1.35 1.54 1.74 1.99 - 1.35 1.56 1.76 2.03 2.28 2.57 1.71 2.00 2.27 2.59 2.94 3.32 2.07 2.52 2.90 3.31 3.69 4.14 Rated capacitance Rated ripple current Rated capacitance Rated ripple current Rated capacitance Rated ripple current Rated capacitance Rated ripple current Rated capacitance Rated ripple current Rated capacitance Rated ripple current F Arms F Arms F Arms F Arms F Arms F Arms 180 330 390 - 470 560 560 - 680 - 820 - 220 270 390 470 560 680 680 - 820 - 1000 1200 1200 - 390 680 - 820 - 1000 - 1200 1500 1500 - 1800 - 560 820 - 1200 - 1500 - 1800 - 1800 2200 2200 2700 0.70 1.16 1.43 - 1.52 1.50 1.62 - 1.70 - 1.91 - 0.81 0.95 1.30 1.55 1.73 1.82 1.85 - 1.98 - 2.04 2.12 2.20 - 1.25 1.82 - 1.98 - 2.14 - 2.22 2.46 2.60 - 2.98 - 1.55 1.93 - 2.40 - 2.53 - 2.98 - 3.00 3.10 3.20 3.89 180 270 330 390 470 - 560 - 680 - 680 - 220 - 390 - 470 - 560 680 680 820 820 1000 1000 - 330 560 - 680 820 820 1000 1000 1200 1200 1500 1500 - 470 680 820 1000 - 1200 1500 1500 1800 1800 - 2200 - 0.70 1.08 1.30 1.35 1.50 - 1.62 - 1.75 - 1.80 - 0.85 - 1.35 - 1.62 - 1.69 1.72 1.75 1.85 1.85 1.91 1.95 - 1.15 1.67 - 1.74 1.85 1.90 2.01 2.10 2.19 2.19 2.36 2.52 - 1.40 1.92 1.95 2.16 - 2.34 2.56 2.56 2.60 2.67 - 3.15 - 150 220 330 - 390 - 470 - 560 - 680 - 220 - 330 - 470 - 560 - 680 - 820 - 820 1000 270 470 - 680 - 820 - 1000 - 1000 1200 1200 1500 470 680 - 820 1000 1000 1200 1200 1500 1500 1800 1800 2200 0.65 1.08 1.30 - 1.41 - 1.50 - 1.58 - 1.78 - 0.85 - 1.35 - 1.47 - 1.65 - 1.80 - 1.97 - 1.99 2.17 1.05 1.56 - 1.82 - 1.99 - 2.17 - 2.20 2.32 2.39 2.59 1.56 1.96 - 2.07 2.22 2.22 2.42 2.42 2.59 2.61 2.70 2.85 3.30 120 180 220 - 270 - 330 390 390 - 470 0.60 0.94 1.10 - 1.13 - 1.30 1.41 1.49 - 1.50 150 - 220 - 330 - 390 - 470 - 560 - 680 - 220 330 390 470 560 560 680 680 820 820 - 1000 - 330 470 560 560 680 820 - 1000 - 1200 - 1500 - 0.74 - 1.15 - 1.30 - 1.41 - 1.52 - 1.80 - 2.00 - 0.95 1.30 1.41 1.51 1.70 1.80 1.90 2.00 2.20 2.25 - 2.47 - 1.16 1.51 1.65 1.65 2.00 2.20 - 2.47 - 2.60 - 3.00 - 47 68 82 100 120 - 150 - 180 - 220 - 68 - 82 100 120 150 150 180 180 220 220 270 270 330 100 120 150 180 220 220 270 270 330 330 390 390 470 150 180 220 270 330 330 390 390 470 470 560 560 - 0.37 0.47 0.56 0.62 0.75 - 0.83 - 0.98 - 1.10 - 0.46 - 0.65 0.62 0.70 0.83 0.85 0.98 1.01 1.05 1.05 1.22 1.25 1.44 0.60 0.78 0.83 0.98 1.03 1.10 1.22 1.23 1.44 1.45 1.60 1.60 1.90 0.80 0.95 1.03 1.22 1.37 1.39 1.60 1.60 1.85 1.91 2.12 2.15 - - 56 68 82 82 100 100 120 120 150 150 180 - - 68 82 100 120 120 150 150 180 180 220 220 - - 100 120 150 180 180 220 220 270 270 - 330 - - 150 - 220 - 270 - 330 390 390 - 470 - - 0.47 0.56 0.64 0.65 0.70 0.70 0.73 0.77 0.88 0.90 1.00 - - 0.56 0.64 0.70 0.73 0.77 0.88 0.90 1.00 1.02 1.12 1.15 - - 0.70 0.73 0.88 0.95 0.99 1.12 1.16 1.28 1.32 - 1.45 - - 0.86 - 1.12 - 1.28 - 1.45 1.45 1.49 - 1.85 - 160 180 200 250 400 450 (Note) Rated ripple current : 105 , 120Hz NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. 135 CAT.No.2013/2014E Large Capacitance Aluminum Electrolytic Capacitors 22x30 35 Rated ripple current Rated voltage(V) Item 25 Rated capacitance LAX 8OWUD/RQJ/LIH+LJK5HOLDELOLW\&DSDFLWRUV (R) LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS *5((1 &$3 Y& KRXUV Ultra Long Life, high-reliability capacitors. Guarantees 5000 hours at 105 C. Long life LAX LAG Marking color : White print on a black sleeve Specifications Performance -25 to 105 20 Item Category temperature range () Tolerance at rated capacitance (%) Leakage current (A) (20,120Hz) Less than 0.02CV or 3mA whichever is smaller (after 5 minutes) C : Rated capacitance (F) ; V : Rated voltage (V) Rated voltage (V) tan (max.) Tangent of loss angle (tan) 160 0.215 200 0.15 250 0.15 (20) 400 0.20 (20,120Hz) Impedance ratio (max.) and low temperature Within 30% of the value at 20 4 -25 -25/20 Percentage of capacitance change (%) Characteristics at high (120Hz) Endurance (105) (Applied ripple current) Shelf life (105) Test time Leakage current Percentage of capacitance change Tangent of the loss angle 5000 hours The initial specified value or less Within 20% of initial value 200% or less of the initial specified value Test time Leakage current Percentage of capacitance change Tangent of the loss angle 1000 hours The initial specified value or less Within 15% of initial value 150% or less of the initial specified value Voltage application treatment JIS C5101-1, -4 1998 (IEC 60384-1 1992, -4 1985) Applicable standards Standard Ratings Rated ripple current Rated capacitance Rated ripple current (F) (Arms) (F) (Arms) 0.75 0.99 1.16 1.24 1.37 0.96 1.14 1.45 1.55 1.72 1.11 1.43 1.66 1.79 2.00 1.76 2.05 2.22 2.43 150 180 220 270 390 180 270 330 390 470 270 330 470 560 680 470 560 680 1000 0.68 0.81 0.95 1.03 1.16 0.78 1.03 1.21 1.29 1.43 1.01 1.16 1.33 1.48 1.59 1.33 1.55 1.69 2.22 56 68 82 120 150 68 100 120 150 220 100 150 180 220 270 180 220 270 330 0.34 0.40 0.47 0.56 0.63 0.39 0.51 0.60 0.66 0.80 0.50 0.66 0.77 0.83 0.92 0.74 0.87 0.94 1.04 Lug terminal details Thickness : 0.8t 0.90.1 22 Sleeve 1 (Arms) 0. 10 (F) 180 270 330 390 470 270 330 470 560 680 330 470 560 680 1000 680 820 1000 1200 120Hz. 10 Large Capacitance Aluminum Electrolytic Capacitors 0.91 1.09 1.27 1.36 1.52 1.15 1.36 1.54 1.68 1.81 1.45 1.68 1.82 1.90 2.09 1.93 2.15 2.52 2.63 : 105, Rated capacitance 1.50.1 Markings L2max. 4.00.5 Vent 5.4 (Arms) Rated ripple current 0.9 (F) 22x25 S22 270 22x30 S23 330 22x35 S24 390 22x40 S25 470 22x50 S27 680 25x25 S32 390 25x30 S33 470 25x35 S34 560 25x40 S35 680 25x50 S37 820 30x25 S42 560 30x30 S43 680 30x35 S44 820 30x40 S45 1000 30x50 S47 1200 35x30 S53 820 35x35 S54 1000 35x40 S55 1500 35x50 S57 1800 (Note) Rated ripple current Rated capacitance Unit : mm 400 4.7 Casing symbol Rated ripple current 250 2.1 Position of PC board holes (For 4.0 0.5) () Negative terminal indicated by cross notching 2.5 100.1 Rated capacitance 200 3.30.1 Item Case DxL (mm) Outline Drawing 160 D1max. Rated voltage (V) Three terminals type 2-2 4.750.1 Coefficient of Frequency for Rated Ripple Current Frequency (Hz) 50 120 1k 10k 30k 0.87 0.80 1 1 1.11 1.14 1.18 1.19 1.20 1.20 Rated voltage (V) 160 to 250 400 Part numbering system (example : 200V470F) LAX The electric characteristics are described on page 175. Series code 200 Rated voltage symbol V 471 M Rated capacitance symbol Capacitance tolerance symbol S34 # Casing symbol B Optional symbol In the case of three terminals type, a series name is "LTX". CAT.No.2013/2014E 136 NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. (R) MEMO 137 CAT.No.2013/2014E LJ6,LJ2 *5((1 &$3 /DUJHFDSDFLWDQFH/RQJ/LIH+LJK5HOLDELOLW\&DSDFLWRUV (R) LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Y& KRXUV Large-capacitornce, Long-Life, High-reliability capacitors. Guarantees 5000 hours at 105 C. Large capacitance LJ6 LAX Marking color : White print on a black sleeve Specifications Performance -25105 20 Item Category temperature range () Tolerance at rated capacitance (%) Leakage current (A) 20120Hz Less than 0.02CV or 5mA whichever is smaller (after 5 minutes) C : Rated capacitance (F) ; V : Rated voltage (V) Rated voltage (V) tan (max.) Tangent of loss angle (tan) 20 200 to 500 0.15 20120Hz Percentage of capacitance change (%) Characteristics at high Impedance ratio (max.) and low temperature 25 25/20 Within 30% of the value at 20 4 120Hz Endurance (105) (Applied ripple current) Shelf life (105) Test time Leakage current Percentage of capacitance change Tangent of the loss angle 5000 hours The initial specified value or less Within 20% of initial value 200% or less of the initial specified value Test time Leakage current Percentage of capacitance change Tangent of the loss angle 1000 hours The initial specified value or less Within 15% of initial value 150% or less of the initial specified value Voltage application treatment JIS C5101-1-4 1998IEC 60384-1 1992-4 1985 Applicable standards Outline Drawing Unit : mm Sleeve NC 2.6 30 NC Markings 1.50.1 2.1 22.50.1 - L2max. 6.31 Sleeve 1.1-0.1 Thickness : 0.8t 200.1 5-1.3 200.1 NC NC Markings NC - 8.50.5 LJ2 only 40 4.50.5 Vent D1max. Large Capacitance Aluminum Electrolytic Capacitors D1max. Lug terminal details Thickness : 0.8t 0.80.1 4-2 7.5 6.8 LJ6 35, 40 - L2max. 40.1 17.50.1 Vent Coefficient of Frequency for Rated Ripple Current Frequency (Hz) Part numbering system (example : 350V1500F) LJ6 Series code 350 Rated voltage symbol CAT.No.2013/2014E V 152 M Rated capacitance symbol Capacitance tolerance symbol S6D # Casing symbol Rated voltage (V) 200 to 250 315 to 500 B 50 120 1k 10k 30k 0.87 0.80 1 1 1.11 1.14 1.18 1.19 1.20 1.20 Optional symbol 138 NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. (R) LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS LJ6,LJ2 Standard Ratings Rated voltage(V) Item Case Casing DxL mm symbol 35x60 S59 35x70 S5B 35x80 S5C 35x90 S5D 35x100 S5E 40x60 S69 40x70 S6B 40x80 S6C 40x90 S6D 200 315 350 ESR Rated ripple current Rated capacitance ESR Rated ripple current Rated capacitance ESR Rated ripple current Rated capacitance ESR Rated ripple current F Arms F Arms F Arms F Arms 2200 2700 3300 - 3900 2200 2700 3300 3900 0.090 0.073 0.060 - 0.051 0.090 0.073 0.060 0.051 4.05 4.77 5.56 - 6.64 4.40 5.17 6.02 7.00 1500 1800 2200 - 2700 1800 2200 - 2700 0.13 0.11 0.090 - 0.073 0.11 0.090 - 0.073 3.17 3.69 4.31 - 5.24 3.77 4.43 - 5.42 820 1000 1200 1500 1800 1000 1200 1500 1800 0.24 0.20 0.17 0.13 0.11 0.20 0.17 0.13 0.11 2.23 2.62 3.03 3.55 4.07 2.68 3.11 3.67 4.21 820 1000 1200 1500 1800 1000 1200 1500 1800 0.24 0.20 0.17 0.13 0.11 0.20 0.17 0.13 0.11 2.10 2.46 2.84 3.34 3.82 2.50 2.90 3.40 3.95 Rated capacitance ESR Rated ripple current Rated capacitance ESR Rated ripple current Rated capacitance ESR Rated ripple current F Arms F Arms F Arms 820 1000 - 1200 1500 - 1000 - 1200 1500 0.24 0.20 - 0.17 0.13 - 0.20 - 0.17 0.13 2.49 2.93 - 3.55 4.15 - 3.10 - 3.65 4.30 560 680 820 1000 1200 680 820 1000 1200 - 0.36 0.29 0.24 0.20 0.17 0.29 0.24 0.20 0.17 - 2.16 2.53 2.94 3.41 3.90 2.45 2.84 3.33 3.65 - 390 470 560 680 - 560 680 - 820 1000 0.51 0.42 0.36 0.29 - 0.36 0.29 - 0.24 0.20 1.65 1.92 2.22 2.57 - 2.15 2.51 - 3.05 3.51 Rated voltage(V) Item Case Casing DxL mm symbol 35x60 S59 35x70 S5B 35x80 S5C 35x90 S5D 35x100 S5E 40x60 S69 40x70 S6B 40x80 S6C 40x90 S6D 40x100 S6E 250 Rated capacitance 400 450 500 (Note) ESR : 20 , 120Hz ; Rated ripple current : 105 , 120Hz Large Capacitance Aluminum Electrolytic Capacitors NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. 139 CAT.No.2013/2014E LM,LPM )RU,QYHUWHU+LJK5LSSOH&DSDFLWRUV (R) LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS *5((1 &$3 Y& KRXUV Withstands high-ripple current generated by the voltage doubler rectifier system. Guarantees 2000 hours at 85. High ripple LM, LPM LA5 Marking color : White print on a black sleeve Specifications Tolerance at rated capacitance (%) Performance -25 to 85 20 Leakage current (A) Less than 0.01CV or 5mA whichever is smaller (after 5 minutes) C : Rated capacitance (F) ; V : Rated voltage (V) Item Category temperature range ( C) Rated voltage (V) tan (max.) Tangent of loss angle (tan) (20,120Hz) (20) 250, 400 0.05 (20,120Hz) 250, 400 4 Rated voltage (V) Impedance ratio (max.) 25/20 Characteristics at high and low temperature (120Hz) Endurance (85) (Applied ripple current) Shelf life (85) Test time Leakage current Percentage of capacitance change Tangent of the loss angle 2000 hours The initial specified value or less Within 20% of initial value 200% or less of the initial specified value Test time Leakage current Percentage of capacitance change Tangent of the loss angle 500 hours The initial specified value or less Within 15% of initial value 150% or less of the initial specified value Voltage application treatment Applicable standards JIS C5101-1, -4 1998 (IEC 60384-1 1992, -4 1985) Outline Drawing Unit : mm LPMsnap-in type 22 Sleeve 10 0. 10 Lug terminal details Thickness : 0.8t 0.80.1 5.4 1.50.1 2.1 () Negative terminal indicated by cross notching L2max. Vent 4.7 0.9 D1max. 1 Position of PC board holes 4.00.5 Sleeve LMlug type D1max. Vent 141 Large Capacitance Aluminum Electrolytic Capacitors Markings 122 L2max. Coefficient of Frequency for Rated Ripple Current Frequency (Hz) Part numbering system (example : 250V440F) LM 250 V Series code Rated voltage symbol CAT.No.2013/2014E 441 Rated capacitance symbol K Capacitance tolerance symbol S6E # Casing symbol Rated voltage (V) 250, 400 B 50 120 400 1k 10k 0.80 1 1.32 1.46 1.61 Optional symbol 140 NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. (R) LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS LM series Standard Ratings LPM series Standard Ratings 250V Rated capacitance Casemm LM,LPM 250V Casing symbol ESR Rated ripple current Rated capacitance max. Arms D L Casemm Casing symbol ESR Rated ripple current max. Arms D L 200 40 100 S6E 0.33 3.80 100 35 40 S55 0.66 1.90 220 40 100 S6E 0.30 4.00 110 35 40 S55 0.60 2.00 330 40 100 S6E 0.20 4.85 165 35 45 S56 0.40 2.45 360 40 100 S6E 0.18 5.10 180 35 50 S57 0.37 2.58 390 40 100 S6E 0.17 5.30 195 35 50 S57 0.34 2.68 420 40 100 S6E 0.16 5.50 210 35 50 S57 0.32 2.78 440 40 100 S6E 0.15 5.60 220 35 50 S57 0.30 2.80 Casing symbol ESR Rated ripple current Rated capacitance max. Arms D L 400V Rated capacitance 90 100 110 150 Casemm 400V ESR Rated ripple current max. Arms S57 1.47 1.50 40 S55 1.21 1.70 35 50 S57 0.88 1.98 35 50 S57 0.81 2.00 Casemm D L 35 80 S5C 0.74 3.00 45 35 50 40 80 S6C 0.74 3.00 55 35 35 90 S5D 0.66 3.20 75 40 90 S6D 0.66 3.20 82 35 100 S5E 0.60 3.30 40 100 S6E 0.60 3.30 35 100 S5E 0.44 3.90 3.90 40 100 S6E 0.44 165 40 100 S6E 0.40 4.10 220 40 100 S6E 0.30 4.10 Casing symbol NoteESR20120Hz ; Rated ripple current : 85 , 120Hz NoteESR20120Hz ; Rated ripple current : 85 , 120Hz Large Capacitance Aluminum Electrolytic Capacitors NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. 141 CAT.No.2013/2014E LYX 6FUHZ7HUPLQDO/RQJ/LIH+LJK7HPSHUDWXUHFDSDFLWRUV (R) LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS *5((1 &$3 Y& KRXUV Screw Terminal, Long Life, High Temperature capacitors. Guarantees 5000 hours at 105 C. Large capacitance LYX LJ6 Marking color : Silver print on a black sleeve Specifications Performance -25 to 105 20 Item Category temperature range () Tolerance at rated capacitance (%) Leakage current (A) (20,120Hz) Less than 0.01CV or 5mA whichever is smaller (after 5 minutes) C : Rated capacitance (F) ; V : Rated voltage (V) Tangent of loss angle (20) 0.20 (tan) (20,120Hz) Endurance (105) (Applied ripple current) Shelf life (105) Test time Leakage current Percentage of capacitance change Tangent of the loss angle 5000 hours The initial specified value or less Within 20% of initial value 200% or less of the initial specified value Test time Leakage current Percentage of capacitance change Tangent of the loss angle 1000 hours The initial specified value or less Within 20% of initial value 200% or less of the initial specified value Voltage application treatment JIS C5101-1, -4 1998 (IEC 60384-1 1992, -4 1995) Applicable standards Outline Drawing Unit : mm Sleeve Vent F D1 M5 - Plate L3 36 12.7 51 22.0 64 28.2 77 31.4 90 31.4 101 41.5 8 max. Mounting Clamp Unit : mm Code J2legs Code K3legs A B A 0 W1 12 W2 B 45 Large Capacitance Aluminum Electrolytic Capacitors D F1 R1 H R2 D 36 51 64 77 90 W1 48 68 81 93.5 108 W2 58 80 93 106 120.5 A 3.8 5 5 5 5 B 7 7 7 7 7 D 51 64 77 90 101 R1 31.8 38.1 44.5 50.8 57.5 R2 36.5 42.6 49.2 55.6 63.5 A 5 5 5 5 6 B 7 7 7 7 8 D 36 51101 H 15 30 Coefficient of Frequency for Rated Ripple Current Frequency (Hz) Part numbering system (example : 400V3300F) LYX Series code 400 Rated voltage symbol CAT.No.2013/2014E V 332 M Rated capacitance symbol Capacitance tolerance symbol DD0 Casing symbol Rated voltage (V) 350 to 450 B Optional symbol 50 120 300 1k 10k 0.80 1.00 1.10 1.30 1.40 Clamp code 142 NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. (R) LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS LYX Standard Ratings 350V Rated capacitance Casemm 400V Casing symbol ESR Rated ripple current Rated capacitance m max. Arms Casemm Casing symbol ESR Rated ripple current m max. Arms D L D L 1000 51 75 C75 259 3.9 1000 51 75 C75 215 1200 51 75 C75 215 4.2 1200 51 96 C96 179 4.6 1500 51 96 C96 172 5.2 1500 51 115 CB5 143 5.6 3.9 1800 51 96 C96 143 5.7 1800 51 130 CD0 119 6.4 2200 51 130 CD0 117 7.1 2200 64 96 D96 98 6.9 8.2 2700 64 96 D96 96 7.7 2700 64 115 DB5 80 3300 64 115 DB5 78 9.1 3300 64 130 DD0 65 9.5 3900 64 130 DD0 66 10.4 64 155 DF5 55 11.1 64 155 DF5 55 12.2 77 115 EB5 55 11.5 64 195 DJ5 46 14.6 77 130 ED0 46 13.1 6800 77 155 EF5 38 15.5 8200 90 157 FF7 31 18.1 10000 90 157 FF7 26 19.9 8200 12000 90 196 FJ6 22 23.8 10000 15000 90 236 FN6 17 28.8 12000 90 4700 5600 3900 4700 5600 6800 77 115 EB5 55 10.4 64 195 DJ5 46 13.4 77 130 ED0 46 12.0 64 195 DJ5 39 14.6 77 155 EF5 39 14.0 90 157 FF7 32 16.5 90 157 FF7 26 18.1 90 196 FJ6 22 21.7 236 FN6 18 25.8 450V Rated capacitance Casemm Casing symbol ESR Rated ripple current m max. Arms D L 1000 51 96 C96 215 4.2 1200 51 115 CB5 179 5.0 1500 51 130 CD0 143 5.9 1800 64 96 D96 119 6.3 2200 64 115 DB5 98 7.4 64 130 DD0 80 8.6 77 115 EB5 80 8.7 64 155 DF5 65 10.2 10.1 2700 3300 77 130 ED0 65 3900 64 195 DJ5 55 12.3 4700 77 155 EF5 46 12.9 15.4 5600 195 EJ5 38 157 FF7 38 14.9 90 196 FJ6 32 18.0 8200 90 196 FJ6 27 19.8 10000 90 236 FN6 22 23.6 Large Capacitance Aluminum Electrolytic Capacitors 6800 77 90 NoteESR20120Hz ; Rated ripple current : 105 , 120Hz NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. 143 CAT.No.2013/2014E LYL *5((1 &$3 6FUHZ7HUPLQDO/RQJ/LIHFDSDFLWRUV (R) LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Y& KRXUV Screw Terminal, Long Life capacitors. Guarantees 20000 hours at 85 C. Long life LYL LY6 Marking color : Silver print on a black sleeve Specifications Performance -40 to 85 20 Item Category temperature range () Tolerance at rated capacitance (%) Leakage current (A) (20,120Hz) Less than 0.01CV or 5mA whichever is smaller (after 5 minutes) C : Rated capacitance (F) ; V : Rated voltage (V) Tangent of loss angle (20) 0.20 (tan) (20,120Hz) Endurance (85) (Applied ripple current) Shelf life (85) Test time Leakage current Percentage of capacitance change Tangent of the loss angle 20000 hours The initial specified value or less Within 20% of initial value 200% or less of the initial specified value Test time Leakage current Percentage of capacitance change Tangent of the loss angle 1000 hours The initial specified value or less Within 20% of initial value 200% or less of the initial specified value Voltage application treatment JIS C5101-1, -4 1998 (IEC 60384-1 1992, -4 1995) Applicable standards Outline Drawing Unit : mm Sleeve Vent F D1 M5 - Plate L3 36 12.7 51 22.0 64 28.2 77 31.4 90 31.4 101 41.5 8 max. Mounting Clamp Unit : mm Code J2legs Code K3legs A B A 0 W1 12 W2 B 45 Large Capacitance Aluminum Electrolytic Capacitors D F1 R1 H R2 D 36 51 64 77 90 W1 48 68 81 93.5 108 W2 58 80 93 106 120.5 A 3.8 5 5 5 5 B 7 7 7 7 7 D 51 64 77 90 101 R1 31.8 38.1 44.5 50.8 57.5 R2 36.5 42.6 49.2 55.6 63.5 A 5 5 5 5 6 B 7 7 7 7 8 D 36 51101 H 15 30 Coefficient of Frequency for Rated Ripple Current Frequency (Hz) Part numbering system (example : 450V4700F) LYL Series code 450 Rated voltage symbol CAT.No.2013/2014E V Rated voltage (V) 472 M EF5 B Rated capacitance symbol Capacitance tolerance symbol Casing symbol Optional symbol 350 to 450 50 120 300 1k 10k 0.80 1.00 1.10 1.30 1.40 Clamp code 144 NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. (R) LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS LYL Standard Ratings 350V Rated capacitance Casemm 400V Casing symbol ESR Rated ripple current Rated capacitance m max. Arms D L Casemm Casing symbol ESR Rated ripple current m max. Arms D L 1000 51 75 C75 259 3.9 1000 51 75 C75 215 1200 51 75 C75 215 4.2 1200 51 96 C96 179 4.6 1500 51 96 C96 172 5.2 1500 51 115 CB5 143 5.6 3.9 1800 51 96 C96 143 5.7 1800 51 130 CD0 119 6.4 2200 51 130 CD0 117 7.1 2200 64 96 D96 98 6.9 8.2 2700 64 96 D96 96 7.7 2700 64 115 DB5 80 3300 64 115 DB5 78 9.1 3300 64 130 DD0 65 9.5 3900 64 130 DD0 66 10.4 64 155 DF5 55 11.1 64 155 DF5 55 12.2 77 115 EB5 55 11.5 64 195 DJ5 46 14.6 77 130 ED0 46 13.1 6800 77 155 EF5 38 15.5 8200 90 157 FF7 31 18.1 10000 90 157 FF7 26 19.9 8200 12000 90 196 FJ6 22 23.8 10000 15000 90 236 FN6 17 28.8 12000 90 4700 5600 3900 4700 5600 6800 77 115 EB5 55 10.4 64 195 DJ5 46 13.4 77 130 ED0 46 12.0 64 195 DJ5 39 14.6 77 155 EF5 39 14.0 90 157 FF7 32 16.5 90 157 FF7 26 18.1 90 196 FJ6 22 21.7 236 FN6 18 25.8 450V Rated capacitance Casemm Casing symbol ESR Rated ripple current m max. Arms D L 1000 51 96 C96 215 4.2 1200 51 115 CB5 179 5.0 1500 51 130 CD0 143 5.9 1800 64 96 D96 119 6.3 2200 64 115 DB5 98 7.4 64 130 DD0 80 8.6 77 115 EB5 80 8.7 64 155 DF5 65 10.2 10.1 2700 3300 77 130 ED0 65 3900 64 195 DJ5 55 12.3 4700 77 155 EF5 46 12.9 15.4 5600 195 EJ5 38 157 FF7 38 14.9 90 196 FJ6 32 18.0 8200 90 196 FJ6 27 19.8 10000 90 236 FN6 22 23.6 Large Capacitance Aluminum Electrolytic Capacitors 6800 77 90 NoteESR20120Hz ; Rated ripple current : 85 , 120Hz NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. 145 CAT.No.2013/2014E LY6 *5((1 &$3 6FUHZ7HUPLQDO0LQLDWXUL]HG+LJK5LSSOHFDSDFLWRUV (R) LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Y& KRXUV Screw Terminal, Miniaturized, High Ripple capacitors. Guarantees 5000 hours at 85 C. Long life LYL LY6 Marking color : Silver print on a black sleeve Specifications Performance -25 to 85 20 Item Category temperature range () Tolerance at rated capacitance (%) Leakage current (A) (20,120Hz) Less than 0.01CV or 5mA whichever is smaller (after 5 minutes) C : Rated capacitance (F) ; V : Rated voltage (V) Tangent of loss angle (20) 0.20 (tan) (20,120Hz) Endurance (85) (Applied ripple current) Shelf life (85) Test time Leakage current Percentage of capacitance change Tangent of the loss angle 5000 hours The initial specified value or less Within 20% of initial value 200% or less of the initial specified value Test time Leakage current Percentage of capacitance change Tangent of the loss angle 1000 hours The initial specified value or less Within 20% of initial value 200% or less of the initial specified value Voltage application treatment JIS C5101-1, -4 1998 (IEC 60384-1 1992, -4 1995) Applicable standards Outline Drawing Unit : mm Sleeve Vent F D1 M5 - Plate 36 12.7 51 22.0 64 28.2 77 31.4 90 31.4 101 41.5 8 max. L3 Mounting Clamp Unit : mm Code J2legs Code K3legs A B A 0 W1 12 W2 B 45 Large Capacitance Aluminum Electrolytic Capacitors D F1 R1 H R2 D 36 51 64 77 90 W1 48 68 81 93.5 108 W2 58 80 93 106 120.5 A 3.8 5 5 5 5 B 7 7 7 7 7 D 51 64 77 90 101 R1 31.8 38.1 44.5 50.8 57.5 R2 36.5 42.6 49.2 55.6 63.5 A 5 5 5 5 6 B 7 7 7 7 8 D 36 51101 H 15 30 Coefficient of Frequency for Rated Ripple Current Frequency (Hz) Part numbering system (example : 400V12000F) LY6 Series code 400 Rated voltage symbol CAT.No.2013/2014E V Rated voltage (V) 123 M FF7 B Rated capacitance symbol Capacitance tolerance symbol Casing symbol Optional symbol 400 to 550 50 120 300 1k 10k 0.80 1.00 1.10 1.30 1.40 Clamp code 146 NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. (R) LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS LY6 Standard Ratings 400V Rated capacitance Casemm 450V Casing symbol ESR Rated ripple current Rated capacitance m max. Arms D L Casemm Casing symbol ESR Rated ripple current m max. Arms D L 2200 51 115 CB5 98 8.8 1800 51 115 CB5 119 7.6 2700 51 130 CD0 80 10.2 2200 51 130 CD0 98 8.8 3300 64 96 D96 65 11.0 2700 64 96 D96 80 9.5 3900 64 115 DB5 55 12.8 3300 64 115 DB5 65 11.2 12.8 4700 64 130 DD0 46 14.8 3900 64 130 DD0 55 5600 77 115 EB5 38 16.2 4700 77 115 EB5 46 14.1 6800 77 130 ED0 32 18.7 5600 77 130 ED0 38 16.2 8200 77 155 EF5 26 22.0 6800 77 155 EF5 32 19.1 77 195 EJ5 22 26.7 77 195 EJ5 26 23.0 90 131 FD1 22 24.2 90 157 FF7 18 28.5 10000 12000 8200 10000 15000 90 196 FJ6 14 34.8 18000 90 236 FN6 12 41.2 22000 101 237 GN7 10 47.0 18000 Casing symbol ESR Rated ripple current Rated capacitance m max. Arms 12000 15000 90 131 FD1 26 21.0 90 171 FH1 22 25.7 90 196 FJ6 18 29.7 101 175 GH5 18 29.3 35.9 90 236 FN6 14 101 195 GJ5 14 24.2 101 237 GN7 12 40.5 500V Rated capacitance 1200 Casemm 550V Casemm Casing symbol ESR Rated ripple current m max. Arms D L D L 51 115 CB5 215 6.2 1000 51 130 CD0 258 5.9 64 96 D96 215 6.3 1200 64 115 DB5 215 6.8 8.0 130 CD0 172 7.3 1500 64 130 DD0 172 96 D96 172 7.1 1800 77 115 EB5 143 8.7 1800 64 115 DB5 143 8.3 2200 77 130 ED0 117 10.1 2200 64 130 DD0 117 9.6 2700 77 155 EF5 96 12.0 2700 77 115 EB5 96 10.7 3300 77 155 EF5 78 13.3 3300 77 130 ED0 78 12.4 3900 90 157 FF7 66 15.5 3900 77 155 EF5 66 14.4 4700 90 171 FH1 55 17.6 77 171 EH1 55 16.5 5600 90 196 FJ6 46 20.3 90 131 FD1 55 15.8 6800 90 236 FN6 38 24.1 77 195 EJ5 46 19.0 8200 101 237 GN7 31 27.3 90 157 FF7 46 18.6 90 171 FH1 38 21.2 90 196 FJ6 31 24.5 101 175 GH5 31 24.2 90 236 FN6 26 29.3 4700 5600 6800 8200 10000 12000 101 195 GJ5 26 27.9 101 237 GN7 22 33.1 Large Capacitance Aluminum Electrolytic Capacitors 51 64 1500 NoteESR20120Hz ; Rated ripple current : 85 , 120Hz NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. 147 CAT.No.2013/2014E LY5 *5((1 &$3 6FUHZ7HUPLQDO6WDQGDUGFDSDFLWRUV (R) LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Y& KRXUV Screw Terminal, Standard capacitors. Guarantees 2000 hours at 85 C. Large capacitance LY5 LA5 Marking color : Silver print on a black sleeve Specifications Performance Item -40 to 85 10 to 250 Category temperature range () Rated voltage (V) -25 to 85 350 to 500 (20,120Hz) Tolerance at rated capacitance (%) 20 Leakage current (A) Less than 0.01CV or 5mA whichever is smaller (after 5 minutes) C : Rated capacitance (F) ; V : Rated voltage (V) Tangent of loss angle (20) 0.20 (tan) Endurance (85) (Applied ripple current) Shelf life (85) (20,120Hz) Test time Leakage current Percentage of capacitance change Tangent of the loss angle 2000 hours The initial specified value or less Within 20% of initial value 200% or less of the initial specified value Test time Leakage current Percentage of capacitance change Tangent of the loss angle 1000 hours The initial specified value or less Within 20% of initial value 200% or less of the initial specified value Voltage application treatment JIS C5101-1, -4 1998 (IEC 60384-1 1992, -4 1995) Applicable standards Outline Drawing Unit : mm Sleeve Vent F D1 M5 - Plate L3 36 12.7 51 22.0 64 28.2 77 31.4 90 31.4 101 41.5 8 max. Mounting Clamp Unit : mm Code J2legs Code K3legs A B A 0 W1 12 W2 B 45 Large Capacitance Aluminum Electrolytic Capacitors D F1 R1 H R2 D 36 51 64 77 90 W1 48 68 81 93.5 108 W2 58 80 93 106 120.5 A 3.8 5 5 5 5 B 7 7 7 7 7 D 51 64 77 90 101 R1 31.8 38.1 44.5 50.8 57.5 R2 36.5 42.6 49.2 55.6 63.5 A 5 5 5 5 6 B 7 7 7 7 8 D 36 51101 H 15 30 Coefficient of Frequency for Rated Ripple Current Frequency (Hz) Part numbering system (example : 50V47000F) LY5 Series code 50 Rated voltage symbol CAT.No.2013/2014E V 473 M Rated capacitance symbol Capacitance tolerance symbol CB5 Casing symbol Rated voltage (V) 10 to 50 63 to 160 200 to 500 B Optional symbol Clamp code 148 50 120 300 1k 10k 0.95 0.95 0.80 1.00 1.00 1.00 1.04 1.06 1.10 1.10 1.16 1.25 1.15 1.30 1.50 NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. (R) LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS LY5 Standard Ratings 10V Rated capacitance 33,000 39,000 47,000 56,000 68,000 82,000 100,000 120,000 150,000 180,000 220,000 270,000 330,000 390,000 470,000 560,000 680,000 820,000 tan 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 1.00 1.00 1.50 1.50 1.50 1.50 2.00 2.00 2.00 2.00 Casemm D 36 36 36 36 36 36 36 36 36 51 51 51 64 64 64 77 77 77 L 53 53 65 83 83 100 101 121 121 96 121 122 96 115 130 115 130 155 16V Rated capacitance 22,000 27,000 33,000 39,000 47,000 56,000 68,000 82,000 100,000 120,000 150,000 180,000 220,000 270,000 330,000 390,000 470,000 560,000 680,000 820,000 Rated ripple Casing current symbol Arms A53 3.4 A53 3.7 A65 4.2 A83 4.7 A83 5.7 AA0 6.3 AA0 7.2 AC1 8.3 C96 8.7 C96 8.6 CB5 9.8 D96 11.6 DB5 13.3 DC1 14.8 DD0 14.9 EB5 17.0 ED0 20.0 EF5 20.3 FD1 23.5 FF7 26.4 FF7 29.6 Rated capacitance 5,600 6,800 8,200 10,000 12,000 15,000 18,000 22,000 27,000 33,000 39,000 47,000 56,000 68,000 82,000 100,000 120,000 150,000 180,000 220,000 270,000 A53 A53 A65 A83 A83 AA0 AA1 AC1 AC1 C96 CC1 CC2 D96 DB5 DD0 EB5 ED0 EF5 tan 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.80 0.80 0.80 1.00 1.00 1.00 1.00 1.50 1.50 1.50 1.50 1.50 2.00 Casemm D 36 36 36 36 36 36 36 36 36 36 51 51 51 64 64 64 77 77 77 90 35V Rated capacitance 10,000 12,000 15,000 18,000 22,000 27,000 33,000 39,000 47,000 56,000 68,000 82,000 100,000 120,000 150,000 180,000 220,000 270,000 330,000 390,000 470,000 tan 0.40 0.40 0.40 0.40 0.40 0.40 0.40 0.50 0.50 0.60 0.60 0.60 0.60 0.80 0.80 0.80 0.80 1.00 1.00 1.00 1.00 Casemm D 36 36 36 36 36 36 36 36 51 51 51 64 64 64 64 77 77 77 90 90 90 L 53 53 65 83 83 100 100 121 96 96 115 96 115 121 130 115 130 155 131 157 157 tan 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.30 0.30 0.30 0.30 0.30 0.40 0.40 0.40 0.40 0.40 0.40 Casemm D 36 36 36 36 36 36 36 36 36 36 51 51 51 51 64 64 77 77 77 90 90 L 53 53 65 83 83 83 100 100 121 121 96 96 115 130 115 130 115 130 155 131 157 Rated capacitance 15,000 18,000 22,000 27,000 33,000 39,000 47,000 56,000 68,000 82,000 100,000 120,000 150,000 180,000 220,000 270,000 330,000 390,000 470,000 560,000 680,000 Rated ripple Casing current symbol Arms A53 3.0 A53 3.3 A53 3.6 A65 4.0 A83 4.7 A83 5.5 AA0 6.2 AC1 6.3 AC1 7.1 C96 8.2 C96 8.1 CB5 9.3 D96 10.5 D96 12.0 DB5 13.7 EB5 14.7 EB5 16.7 ED0 19.3 EF5 21.9 FD1 21.4 FF7 24.6 Rated capacitance 3,900 4,700 5,600 6,800 8,200 10,000 12,000 15,000 18,000 22,000 27,000 33,000 39,000 47,000 56,000 68,000 82,000 100,000 120,000 150,000 180,000 220,000 A53 A53 A53 A65 A83 A83 AA0 AA0 AC1 AC1 C96 CB5 CD0 D96 DB5 DD0 EB5 ED0 EF5 FF7 tan 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.60 0.60 0.60 0.60 0.80 0.80 0.80 1.00 1.00 1.00 1.20 1.20 1.20 1.20 Casemm D 36 36 36 36 36 36 36 36 36 36 51 51 51 64 64 64 64 77 77 90 90 50V tan 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.40 0.40 0.40 0.50 0.50 0.50 0.50 0.50 0.60 0.60 0.60 0.60 0.60 0.60 Casemm D 36 36 36 36 36 36 36 36 36 51 51 51 64 64 64 77 77 77 77 90 90 80V Rated capacitance 3,300 3,900 4,700 5,600 6,800 8,200 10,000 12,000 15,000 18,000 22,000 27,000 33,000 39,000 47,000 56,000 68,000 82,000 100,000 120,000 150,000 L 53 53 53 65 83 83 100 100 121 121 96 115 130 96 115 130 115 130 155 157 25V Rated ripple current Arms 4.1 4.5 5.0 5.9 6.4 7.3 8.4 8.3 9.5 10.9 11.3 12.8 15.3 17.6 16.8 18.3 21.3 23.6 27.6 27.1 Casing symbol L 53 53 53 65 83 83 100 121 121 96 96 115 96 96 115 115 115 130 155 131 157 L 53 53 53 65 83 83 100 100 121 121 96 115 130 96 115 130 155 115 155 131 157 Casing symbol A53 A53 A53 A65 A83 A83 AA0 AA0 AC1 AC1 C96 CB5 CD0 D96 DB5 DD0 DF5 EB5 EF5 FD1 FF7 Rated ripple current Arms 3.7 4.1 4.5 5.0 5.9 6.7 7.7 7.9 9.2 10.4 10.3 11.7 14.1 15.7 16.1 18.6 21.9 22.0 25.6 27.9 32.5 63V tan 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.30 0.30 0.30 0.40 0.40 0.40 0.40 0.40 0.50 0.50 0.50 0.50 0.50 0.60 0.60 Casemm D 36 36 36 36 36 36 36 36 36 36 51 51 51 51 64 64 64 77 77 77 90 90 L 53 53 53 65 83 83 100 100 121 121 96 96 115 130 115 121 130 115 130 155 131 157 Casing symbol A53 A53 A53 A65 A83 A83 AA0 AA0 AC1 AC1 C96 C96 CB5 CD0 DB5 DC1 DD0 EB5 ED0 EF5 FD1 FF7 Rated ripple current Arms 2.7 3.0 3.3 3.6 4.3 4.9 5.6 5.9 6.7 7.8 7.4 8.4 9.5 11.3 12.8 12.7 14.5 16.7 18.9 22.4 22.4 26.2 100V Rated ripple Rated Casing current capacitance symbol Arms A53 2.5 1,800 A53 2.8 2,200 A65 3.0 2,700 A83 3.6 3,300 A83 3.9 3,900 A83 4.5 4,700 AA0 5.2 5,600 AA0 5.9 6,800 AC1 6.8 8,200 AC1 7.8 10,000 C96 8.0 12,000 C96 9.2 15,000 CB5 10.5 18,000 CD0 12.0 22,000 DB5 13.6 27,000 DD0 13.4 33,000 EB5 15.4 39,000 ED0 17.5 47,000 EF5 20.5 56,000 FD1 22.4 68,000 FF7 26.5 82,000 100,000 tan 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.35 0.35 0.35 0.35 0.35 Casemm D 36 36 36 36 36 36 36 36 36 36 51 51 51 51 64 64 77 77 77 90 90 90 L 53 53 53 65 83 83 100 100 121 121 75 96 115 130 115 130 115 130 155 131 157 171 Casing symbol A53 A53 A53 A65 A83 A83 AA0 AA0 AC1 AC1 C75 C96 CB5 CD0 DB5 DD0 EB5 ED0 EF5 FD1 FF7 FH1 Rated ripple current Arms 1.9 2.1 2.3 2.6 3.0 3.5 3.9 4.5 5.1 5.9 6.4 7.0 8.3 10.0 11.5 11.9 13.4 14.2 16.0 18.8 20.5 24.0 Notetan 20120Hz ; Rated ripple current : 85 , 120Hz NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. 149 CAT.No.2013/2014E Large Capacitance Aluminum Electrolytic Capacitors Rated ripple current Arms 4.3 4.7 5.2 6.1 6.7 7.7 8.8 10.0 10.8 12.0 11.2 12.8 15.3 17.3 16.7 19.0 21.7 24.7 Casing symbol LY5 (R) LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Standard Ratings 160V Rated capacitance 3,300 4,700 5,600 6,800 10,000 12,000 15,000 18,000 22,000 33,000 39,000 tan 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 Casemm D 36 51 51 51 64 51 64 64 77 90 90 L 121 75 96 96 96 120 130 130 130 131 157 200V Casing symbol AC1 C75 C96 C96 D96 CC0 DD0 DD0 ED0 FD1 FF7 Rated ripple Rated current capacitance Arms 5.2 2,200 5.9 3,300 7.0 4,700 7.8 5,600 10.4 6,800 11.3 8,200 14.3 10,000 15.6 15,000 18.3 18,000 23.8 22,000 27.9 33,000 tan 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 Casemm D 36 51 51 51 51 64 64 77 77 77 90 350V Rated capacitance 470 680 1,000 1,500 1,800 2,200 2,700 3,300 3,900 4,700 5,600 6,800 8,200 10,000 12,000 15,000 18,000 tan 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 Casemm D 36 36 36 51 51 51 51 51 64 64 77 77 77 90 90 90 90 L 83 83 100 75 96 96 130 130 115 130 115 130 155 157 157 196 236 L 100 75 96 115 130 96 96 96 130 150 157 250V Casing symbol AA0 C75 C96 CB5 CD0 D96 D96 E96 ED0 EF0 FF7 Rated ripple Rated current capacitance Arms 3.9 1,500 4.9 2,200 6.4 3,300 7.6 4,700 8.8 6,800 9.4 8,200 10.4 10,000 14.4 15,000 16.5 18,000 19.6 22,000 25.3 tan 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 Casemm D 36 51 51 64 64 64 64 77 77 90 400V Casing symbol A83 A83 AA0 C75 C96 C96 CD0 CD0 DB5 DD0 EB5 ED0 EF5 FF7 FF7 FJ6 FN6 Rated ripple Rated current capacitance Arms 2.2 470 2.6 680 3.4 1,000 4.3 1,200 5.1 1,500 5.7 1,800 7.1 2,200 7.9 2,700 9.0 3,300 10.3 3,900 11.4 4,700 13.1 5,600 15.4 6,800 18.1 8,200 20.0 10,000 24.5 12,000 28.8 15,000 tan 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 Casemm D 36 36 51 51 51 51 51 64 64 64 77 77 77 90 90 90 90 L 83 100 75 75 96 96 120 96 115 130 115 130 155 157 157 196 236 L 100 75 96 96 115 115 130 130 155 157 Casing symbol AA0 C75 C96 D96 DB5 DB5 DD0 ED0 EF5 FF7 Rated ripple current Arms 3.2 4.0 5.4 7.1 9.1 10.0 11.7 15.1 17.7 20.9 450V Casing symbol A83 AA0 C75 C75 C96 C96 CC0 D96 DB5 DD0 EB5 ED0 EF5 FF7 FF7 FJ6 FN6 Rated ripple Rated current capacitance Arms 2.2 470 2.8 680 3.5 820 3.8 1,000 4.7 1,200 5.2 1,500 6.4 1,800 7.0 2,200 8.2 2,700 9.4 3,300 10.4 3,900 11.9 4,700 14.1 5,600 16.4 6,800 18.3 8,200 21.8 10,000 26.3 12,000 tan 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 Casemm D 36 36 51 51 51 51 51 64 64 64 77 77 77 90 90 90 90 L 83 100 75 75 96 115 130 96 115 130 115 130 155 157 157 196 236 Casing symbol A83 AA0 C75 C75 C96 CB5 CD0 D96 DB5 DD0 EB5 ED0 EF5 FF7 FF7 FJ6 FN6 Rated ripple current Arms 2.2 2.8 3.2 3.5 4.2 5.0 5.9 6.3 7.5 8.7 9.5 10.9 12.8 15.0 16.5 20.0 23.6 500V Large Capacitance Aluminum Electrolytic Capacitors Rated capacitance 1,000 1,500 2,200 2,700 3,300 3,900 4,700 5,600 6,800 8,200 10,000 tan 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 Casemm D 51 64 64 77 77 77 77 90 90 77 90 L 115 96 130 115 130 130 155 157 171 220 236 Casing symbol CB5 D96 DD0 EB5 ED0 ED0 EF5 FF7 FH1 EM0 FN6 Rated ripple current Arms 4.6 5.7 6.9 8.1 9.6 10.8 12.1 13.8 15.8 17.2 22.1 Notetan 20120Hz ; Rated ripple current : 85 , 120Hz CAT.No.2013/2014E 150 NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. (R) ALUMINUM ELECTROLYTIC CAPACITORS FOR AUDIO $OXPLQXP(OHFWURO\WLF&DSDFLWRUVIRU$XGLR Aluminum Electrolytic Capacitors for Audio NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. 151 CAT.No.2013/2014E RVO VERTICAL CHIP TYPE ALUMINUM ELECTROLYTIC CAPACITORS FOR AUDIO &KLS7\SH$XGLR8VH&DSDFLWRUV *5((1 &$3 60' (R) )RU DXGLR Audio grade surface mount product with completely new components using synthetic mica paper for the separator. Both quality sense and sound field that could not be realized by the surface mount products are reproducible. )RUKLJKHUJUDGH 592 592 385(&$3 Marking color : Black print (except height : 10mm) White print on a brown sleeve (8x10L,10x10L) Specifications Item Performance 40 to 85 20 Less than 0.01CV or 3 whichever is larger (after 2 minutes) C : Rated capacitance (F) ; V: Rated voltage (V) Category temperature range () Tolerance at rated capacitance (%) Leakage current (A) 6.3 0.28 Rated voltage (V) tan (max.) Tangent of loss angle (tan) 10 0.24 16 0.20 25 0.14 (20,120Hz) (20) 35 0.12 50 0.10 (20,120Hz) Rated voltage (V) -25/20 -40/20 Characteristics at high and low temperature Impedance ratio (max.) 6.3 3 8 10 3 5 16 2 4 25 2 3 35 2 3 50 2 3 (120Hz) Test time Leakage current Percentage of capacitance change Tangent of the loss angle Endurance (85) (Applied ripple current) 2000 hours The initial specified value or less Within 20% of initial value 200% or less of the initial specified value Shelf life (85) Test time : 1000 hours; other items are the same as those for the endurance. Voltage application treatment Applicable standards JIS C5101-1 1998, -18 1999 (IEC 60384-1 1992, -18 1993) Outline Drawing Unit : mm Frequency (Hz) 0.40.2 0.3MAX Rated voltage (V) 6.3 to 16 25 to 35 50 (P) (C) D0.5 B0.2 (C) A0.2 Coefficient of Frequency for Rated Ripple Current ( ) : Reference size A 4.3 5.3 6.3 8.4 8.4 10.4 1k 10k100k 1 1 1 1.15 1.25 1.35 1.25 1.40 1.50 Part numbering system (example : 16V470F) RVO L 5.30.2 5.30.2 5.30.2 6.50.3 100.5 100.5 120 V 16 471 M H10 P2 U W L D 4 5 6.3 8 8 10 50 0.80 0.80 0.80 B 4.3 5.3 6.3 8.4 8.4 10.4 C 2.0 2.3 2.7 3.4 3.0 3.3 0.5 0.5 0.5 0.5 0.7 0.7 P 1.0 1.5 2.0 2.3 3.1 4.7 W to 0.8 to 0.8 to 0.8 to 0.8 to 1.1 to 1.1 Soldering conditions are described on page 13. Series code Rated voltage symbol Rated capacitance Capacitance symbol tolerance symbol Casing symbol Taping symbol Casing symbol D55 E55 F55 G68 G10 H10 Land pattern size are described on page 11. The taping specifications are described on page 14. Aluminum Electrolytic Capacitors for Audio Standard Ratings Rated voltage (V) Item Rated capacitance (F) 0.22 0.33 0.47 1 2.2 3.3 4.7 10 22 33 47 100 220 330 470 1000 50 6.3 10 16 25 35 Rated ripple current Rated ripple current Rated ripple current Rated ripple current Rated ripple current Rated ripple current Case Case Case Case Case Case (mArms) DxL (mm) DxL (mm) DxL (mm) DxL (mm) DxL (mm) DxL (mm) (mArms) (mArms) (mArms) (mArms) (mArms) 4x5.3 5 4x5.3 6 4x5.3 7 4x5.3 10 4x5.3 15 4x5.3 17 4x5.3 19 4x5.3 18 4x5.3 19 4x5.3 20 5x5.3 26 4x5.3 23 4x5.3 26 5x5.3 32 5x5.3 34 6.3x5.3 44 4x5.3 31 5x5.3 40 5x5.3 44 6.3x5.3 55 6.3x5.3 59 8x6.5 124 5x5.3 44 5x5.3 49 6.3x5.3 63 6.3x5.3 67 8x6.5 124 8x6.5 124 200 5x5.3 53 6.3x5.3 68 6.3x5.3 76 8x6.5 124 8x6.5 124 8x10 366 6.3x5.3 90 6.3x5.3 99 8x6.5 124 8x6.5 137 8x10 200 10x10 8x6.5 149 8x6.5 149 8x10 200 8x10 235 10x10 366 8x6.5 160 8x10 226 8x10 245 10x10 366 8x10 251 10x10 366 10x10 366 10x10 423 (Note) Rated ripple current : 85, 120Hz. CAT.No.2013/2014E 152 NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. VERTICAL CHIP TYPE ALUMINUM ELECTROLYTIC CAPACITORS FOR AUDIO (R) *5((1 &$3 &KLS7\SH)RU$XGLR+LJK*UDGH 6,/0,& Silk fiber paper products used surface mount device. Completely new audio products for the high-grade paper using silk fiber paper. Silk flexibility to reduce the vibration energy of the music, in the sense of high-frequency peak, a significant decrease in roughness of the midrange and bass increase. RVF )RU DXGLR 60' 6,/0,&60' 59) 526 Marking color : Black print Specifications Item Performance 40 to 85 20 Category temperature range () Tolerance at rated capacitance (%) (20,120Hz) Less than 0.01CV or 3 whichever is larger (after 2 min.) C : Rated capacitance (F) , V : Rated voltage (V) Leakage current (A) Rated voltage (V) tan (max.) Tangent of loss angle (tan) (20) 10 0.32 16 0.26 50 0.12 10 3 8 16 2 4 50 2 4 (20,120Hz) Rated voltage (V) -25/20 Impedance ratio (max.) -40/20 Characteristics at high and low temperature (120Hz) Test time Leakage current Percentage of capacitance change Tangent of the loss angle Endurance (85) 2000 hours The initial specified value or less Within 20% of initial value 200% or less of the initial specified value Test time : 500 hours ; other items are the same as those for the endurance. Voltage application treatment : According to JIS C5101-1 Shelf life (85) Applicable standards JIS C5101-1 1998, -18 1999 (IEC 60384-1 1992, -18 1993) Outline Drawing Unit : mm Frequency (Hz) Rated voltage (V) 10 to 16 50 50 120 1k 10k . 100k 0.80 0.80 1 1 1.15 1.35 1.25 1.50 Part numbering system (example : 16V10F) (P) B0.2 D0.5 (C) A0.2 0.40.2 0.3MAX Coefficient of Frequency for Rated Ripple Current (C) RVF Series code W L 16 Rated voltage symbol V 100 M Rated capacitance symbol Capacitance tolerance symbol E55 U Casing symbol Taping symbol ( ) : Reference size D 4 5 6.3 L 5.30.2 5.30.2 5.30.2 A 4.3 5.3 6.6 B 4.3 5.3 6.6 C 2.0 2.3 2.7 W 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 P 1.0 1.5 2.0 Soldering conditions are described on page 13. Land pattern size are described on page 11. The taping specifications are described on page 14. Aluminum Electrolytic Capacitors for Audio Standard Ratings Rated voltage (V) Rated capacitance (F) 0.33 0.47 1 2.2 3.3 4.7 10 22 33 47 100 Item 10 16 50 Rated ripple current Rated ripple current Rated ripple current Case Case Case DxLmm mArms DxLmm mArms DxLmm mArms 4 4x5.3 5 4x5.3 7 4x5.3 5x5.3 11 16 6.3x5.3 4x5.3 8x10 10 28 15 41 5x5.3 5x5.3 16 8x10 6.3x5.3 25 6.3x5.3 28 6.3x5.3 31 50 8x10 54 8x10 60 8x10 8x10 87 8x10 79 (Note) Rated ripple current : 85, 120Hz. NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. 153 CAT.No.2013/2014E RVM VERTICAL CHIP TYPE ALUMINUM ELECTROLYTIC CAPACITORS FOR AUDIO &KLS7\SH)RU$XGLR+LJK*UDGH *5((1 &$3 60' Y& (R) )RU KRXUVDXGLR KRXUV New developed AI-Foil and Electrolyte for Audio grade allow lower distortion. New range of bright and smooth sound is achieved in SMD area. +LJKWHPSHUDWXUH/RQJOLIH Guarantees 2000 hours 105. 590 59* Marking color : Black print Specifications Item Performance 55 to 105 20 Category temperature range () Tolerance at rated capacitance (%) (20,120Hz) Less than 0.01CV or 3 whichever is larger (after 2 min.) C : Rated capacitance (F), V: Rated voltage (V) Leakage current (A) Rated voltage (V) tan (max.) Tangent of loss angle (tan) (20) 6.3 0.28 10 0.24 16 0.20 25 0.16 35 0.13 50 0.12 6.3 2 8 10 2 4 16 2 4 25 2 3 35 2 3 50 2 3 (20,120Hz) Rated voltage (V) -25/20 Impedance ratio (max.) -40/20 Characteristics at high and low temperature (120Hz) Test time Leakage current Percentage of capacitance change Tangent of the loss angle Endurance (85) 2000 hours The initial specified value or less Within 30% of initial value 300% or less of the initial specified value Test time : 1000 hours; other items are the same as those for the endurance. Voltage application treatment : According to JIS C5101-1 Shelf life (85) Applicable standards JIS C5101-1 1998, -18 1999 (IEC 60384-1 1992, -18 1993) Outline Drawing Unit : mm Frequency (Hz) Rated voltage (V) 50 (P) (C) D0.5 B0.2 (C) A0.2 0.40.2 0.3MAX Coefficient of Frequency for Rated Ripple Current RVM ( ) : Reference size 4 5 6.3 8 8 10 Aluminum Electrolytic Capacitors for Audio 5.80.3 5.80.3 5.80.3 6.50.3 10.50.5 10.50.5 4.3 5.3 6.6 8.4 8.4 10.4 4.3 5.3 6.6 8.4 8.4 10.4 2.0 2.3 2.7 3.4 3.0 3.3 0.5 0.5 0.5 0.5 0.7 0.7 to 0.8 to 0.8 to 0.8 to 0.8 to 1.1 to 1.1 Casing symbol 1.0 D61 1.5 E61 2.0 F61 2.3 G68 3.1 GA5 4.7 HA5 50 120 1k 10k100k 0.80 0.80 0.50 0.70 1.00 1.00 1.00 1.00 1.15 1.25 1.35 1.35 1.25 1.40 1.50 1.50 Part numbering system (example : 6.3V220F) W L 6.3 to 16 25 to 35 1 to 3.3F 4.7F to Series code 6 Rated voltage symbol V 221 M G68 Rated capacitance symbol Capacitance tolerance symbol Casing symbol P U R2 Taping symbol Soldering conditions are described on page 13. Land pattern size are described on page 11. The taping specifications are described on page 14. Standard Ratings Rated voltage (V) Item Rated capacitance (F) 1 2.2 3.3 4.7 10 22 33 47 100 220 330 470 6.3 10 16 25 35 50 Case Case Case Case Case Case Rated ripple current Rated ripple current Rated ripple current Rated ripple current Rated ripple current Rated ripple current DxL (mm) DxL (mm) DxL (mm) (mArms) DxL (mm) DxL (mm) DxL (mm) (mArms) (mArms) (mArms) (mArms) (mArms) 4x5.8 7 4x5.8 10 4x5.8 12 4x5.8 11 4x5.8 13 4x5.8 14 5x5.8 17 4x5.8 15 4x5.8 17 5x5.8 21 5x5.8 24 6.3x5.8 29 4x5.8 21 5x5.8 26 5x5.8 28 6.3x5.8 37 6.3x5.8 41 8x6.5 52 5x5.8 29 5x5.8 32 6.3x5.8 41 6.3x5.8 45 8x6.5 62 8x10.5 75 5x5.8 35 6.3x5.8 44 6.3x5.8 48 8x6.5 66 8x10.5 86 8x10.5 90 8x6.5 86 6.3x5.8 60 8x6.5 79 8x10.5 113 10x10.5 145 10x10.5 151 8x10.5 101 8x10.5 150 8x10.5 127 8x10.5 137 10x10.5 194 10x10.5 216 10x10.5 174 8x10.5 156 10x10.5 194 10x10.5 213 10x10.5 215 10x10.5 232 10x10.5 254 (Note) Rated ripple current : 105, 120Hz. CAT.No.2013/2014E 154 NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. VERTICAL CHIP TYPE ALUMINUM ELECTROLYTIC CAPACITORS FOR AUDIO (R) &KLS7\SH$XGLR8VH&DSDFLWRUV *5((1 &$3 60' )RU DXGLR RVW Y& KRXUV Audio grade surface mount product with completely new components using synthetic mica paper for the separator. Both quality sense and sound field that could not be realized by the surface mount products are reproducible. +LJKWHPSHUDWXUH 59: 592 385(&$3 385(&$3 Marking color : Black print (except height : 10mm) White print on a brown sleeve (8x10L,10x10L) Specifications Item Performance 55 to 105 20 Less than 0.01CV or 3 whichever is larger (after 2 minutes) C : Rated capacitance (F) ; V : Rated voltage (V) Category temperature range () Tolerance at rated capacitance (%) Leakage current (A) Rated voltage (V) tan (max.) Tangent of loss angle (tan) (20,120Hz) (20) 6.3 0.30 10 0.26 16 0.22 25 0.16 35 0.13 50 0.12 6.3 4 8 10 3 5 16 2 4 25 2 3 35 2 3 50 2 3 (20,120Hz) Rated voltage (V) -25/20 Impedance ratio (max.) -40/20 Characteristics at high and low temperature (120Hz) Test time Leakage current Percentage of capacitance change Tangent of the loss angle Endurance (105) (Applied ripple current) 1000 hours The initial specified value or less Within 20% of initial value 200% or less of the initial specified value Shelf life (105) Test time : 1000 hours ; other items are the same as those for the endurance. Voltage application treatment Applicable standards JIS C5101-1 1998, -18 1999 (IEC 60384-1 1992, -18 1993) Outline Drawing Unit : mm Frequency (Hz) Rated voltage (V) 6.3 to 16 25 to 35 50 0.40.2 0.3MAX (P) B0.2 D0.5 (C) A0.2 Coefficient of Frequency for Rated Ripple Current 50 120 1k 10k . 100k 0.80 0.80 0.80 1 1 1 1.15 1.25 1.35 1.25 1.40 1.50 (C) Part numbering system (example : 16V470F) RVW 16 V 471 M H10 P2 U W L Series code Rated voltage symbol Rated capacitance Capacitance symbol tolerance symbol Casing symbol Taping symbol ( ) : Reference size D 4 5 6.3 8 8 10 L 5.30.2 5.30.2 5.30.2 6.50.3 100.5 100.5 A 4.3 5.3 6.3 8.4 8.4 10.4 B 4.3 5.3 6.3 8.4 8.4 10.4 C 2.0 2.3 2.7 3.4 3.0 3.3 0.5 0.5 0.5 0.5 0.7 0.7 W to 0.8 to 0.8 to 0.8 to 0.8 to 1.1 to 1.1 Soldering conditions are described on page 13. P 1.0 1.5 2.0 2.3 3.1 4.7 Casing symbol D55 E55 F55 G68 G10 H10 Land pattern size are described on page 11. The taping specifications are described on page 14. Rated voltage (V) Rated capacitance (F) 0.22 0.33 0.47 1 2.2 3.3 4.7 10 22 33 47 100 220 330 470 Item 6.3 10 16 25 35 50 Rated ripple current Rated ripple current Rated ripple current Rated ripple current Rated ripple current Rated ripple current Case Case Case Case Case Case (mArms) DxL (mm) DxL (mm) DxL (mm) DxL (mm) DxL (mm) (mArms) (mArms) (mArms) DxL (mm) (mArms) (mArms) 4x5.3 3 4x5.3 4 4x5.3 5 4x5.3 7 4x5.3 10 4x5.3 12 4x5.3 12 4x5.3 14 5x5.3 17 4x5.3 15 4x5.3 16 5x5.3 21 5x5.3 23 6.3x5.3 26 8x6.5 110 5x5.3 25 5x5.3 28 6.3x5.3 36 6.3x5.3 50 4x5.3 21 8x10 178 5x5.3 31 6.3x5.3 40 6.3x5.3 44 8x6.5 110 5x5.3 30 8x10 178 6.3x5.3 43 6.3x5.3 47 8x6.5 110 8x10 178 5x5.3 36 10x10 324 8x10 178 8x10 178 10x10 324 8x6.5 110 6.3x5.3 61 10x10 324 10x10 324 10x10 324 8x10 178 8x10 178 10x10 324 10x10 324 8x10 178 10x10 324 10x10 324 10x10 324 (Note) Rated ripple current : 105, 120Hz. NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. 155 CAT.No.2013/2014E Aluminum Electrolytic Capacitors for Audio Standard Ratings RVG VERTICAL CHIP TYPE ALUMINUM ELECTROLYTIC CAPACITORS FOR AUDIO *5((1 &$3 &KLS7\SH$XGLR8VH&DSDFLWRUV (R) )RU DXGLR 60' New developed AI-Foil and Electrolyte for Audio grade allow lower distortion. New range of bright and smooth sound is achieved in SMD area. Marking color : Black print Specifications Item Performance 40 to 85 20 Less than 0.01CV or 3 whichever is larger (after 2 minutes) C : Rated capacitance (F) ; V : Rated voltage (V) Category temperature range () Tolerance at rated capacitance (%) Leakage current (A) 6.3 0.28 Rated voltage (V) tan (max.) Tangent of loss angle (tan) 10 0.24 16 0.20 (20,120Hz) (20) 25 0.16 35 0.14 (20,120Hz) 6.3 4 8 Rated voltage (V) -25/20 -40/20 Characteristics at high and low temperature Impedance ratio (max.) 10 3 5 16 2 4 25 2 3 35 2 3 (120Hz) Test time Leakage current Percentage of capacitance change Tangent of the loss angle Endurance (85) (Applied ripple current) 2000 hours The initial specified value or less Within 20% of initial value 200% or less of the initial specified value Shelf life (85) Test time : 500 hours ; other items are the same as those for the endurance. Voltage application treatment Applicable standards JIS C5101-1 1998, -18 1999 (IEC 60384-1 1992, -18 1993) Outline Drawing Unit : mm Frequency (Hz) Rated voltage (V) 6.3 to 16 25 to 35 50 120 1k 10k100k 0.80 0.80 1 1 1.15 1.25 1.25 1.40 (P) Part numbering system (example : 16V47 F) W L RVG (C) D0.5 B0.2 (C) A0.2 0.40.2 0.3MAX Coefficient of Frequency for Rated Ripple Current V 16 Rated voltage symbol Series code F55 U 470 M Rated capacitance symbol Capacitance tolerance symbol Casing symbol Taping symbol ( ) : Reference size L 5.30.2 5.30.2 5.30.2 6.50.3 100.5 100.5 D 4 5 6.3 8 8 10 Aluminum Electrolytic Capacitors for Audio A 4.3 5.3 6.3 8.4 8.4 10.4 B 4.3 5.3 6.3 8.4 8.4 10.4 C 2.0 2.3 2.7 3.4 3.0 3.3 0.5 0.5 0.5 0.5 0.7 0.7 W to 0.8 to 0.8 to 0.8 to 0.8 to 1.1 to 1.1 P 1.0 1.5 2.0 2.3 3.1 4.7 Casing symbol D55 E55 F55 G68 G10 H10 Soldering conditions are described on page 13. Land pattern size are described on page 11. The taping specifications are described on page 14. Standard Ratings Rated voltage (V) Item 6.3 10 16 25 35 Case Rated ripple current Case Rated ripple current Case Rated ripple current Case Rated ripple current Case Rated ripple current DxL (mm) (mArms) DxL (mm) (mArms) DxL (mm) (mArms) DxL (mm) (mArms) DxL (mm) (mArms) 3.3 4x5.3 11 4.7 4x5.3 11 4x5.3 12 4x5.3 13 5x5.3 19 5x5.3 21 5x5.3 22 5x5.3 28 6.3x5.3 36 6.3x5.3 39 60 Rated capacitance (F) 10 22 4x5.3 20 33 5x5.3 29 5x5.3 31 6.3x5.3 40 6.3x5.3 44 8x6.5 47 5x5.3 34 6.3x5.3 43 6.3x5.3 47 8x6.5 66 8x10 82 100 6.3x5.3 58 8x6.5 79 8x6.5 87 8x10 112 10x10 139 220 8x6.5 107 8x10 136 8x10 149 10x10 192 330 8x10 153 8x10 166 10x10 221 470 8x10 183 10x10 229 (Note) Rated ripple current : 85, 120Hz CAT.No.2013/2014E 156 NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. (R) RFS MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS FOR AUDIO 6,/0,&VHULHV6LONILEHUXVLQJDXGLRSXUSRVHFDSDFLWRU ELNA developed new raw material for the separate paper which use a silk fibers. Therefore, this capacitor can give you high grade sound for your audio design. Due to the silk fiber's pliability, the capacitor makes a dream of the high quality sound. For examples ; To relieve the music's vibration energy. To decrease the peak feeling sound at high compass and rough quality sound at middle compass. To increase massive sound at low compass. For bipolar capacitors, consult with us. Marking color : White print on a brown sleeve *5((1 &$3 0LQLDWXUH+LJK*UDGH&DSDFLWRUVIRU$XGLR 6,/0,&,, All lead wires oxygen-free copper for extremely low distortion. (Third high frequency distortion 10kHz,0.1A,-120dB or less) "SILMIC II" mark on sleeve. )RU DXGLR )RUKLJKHUJUDGH 5)6 )RUKLJKHUJUDGH )RUKLJKHUJUDGH 52% 52$ 526 Specifications Item Performance 40 to 85 20 Less than 0.01CV or 3 whichever is larger (after 5 minutes) C : Rated capacitance (F) ; V : Rated voltage (V) Category temperature range () Tolerance at rated capacitance (%) Leakage current (A) 6.3 0.20 Rated voltage (V) tan (max.) Tangent of loss angle (tan) 10 0.17 16 0.13 35 0.10 50 0.08 63 0.08 100 0.08 0.02 is added to every 1000F increase over 1000F (20,120Hz) Test time Leakage current Percentage of capacitance change Tangent of the loss angle Endurance (85) (Applied ripple current) 1000 hours (with the polarity inverted every 250 hours) The initial specified value or less Within 20% of initial value 150% or less of the initial specified value Test time : 1000 hours. Other have same as endurance. Voltage application treatment JIS C5101-1, -4 1998 (IEC 60384-1 1992, -4 1985) Shelf life (85) Applicable standards Outline Drawing Unit : mm Vent Sleeve d0.05 copper wire (tinned) Coefficient of Frequency for Rated Ripple Current Rated voltage (V) F0.5 D0.5max. 6.3 to 16 25 to 35 6.3 2.5 0.6 8 3.5 0.6 10 5.0 0.6 12.5 5.0 0.6 16 7.5 0.8 5060 120 1k 10k 100k 0.8 0.8 0.8 0.8 0.8 1 1 1 1 1 1.1 1.5 1.2 1.6 1.2 1.2 1.7 1.3 1.9 1.3 1.2 1.7 1.3 1.9 1.3 Part numbering system (example : 25V100F) 18 7.5 0.8 RFS 2.0 (10,16L or less : 1.5) 1.5 5 min. 15min. L max. 5 2.0 0.6 Frequency (Hz) CV (FxWV) All CV value 1000 1000 1000 1000 50 to 100 D F d 25 0.10 (20,120Hz) (20) Series code V 25 Rated voltage symbol 101 M Rated capacitance Capacitance symbol tolerance symbol H4 #5 Casing symbol Taping (Forming) symbol Case symbol Casing Casing Casing Casing Case Case Case Case DxL (mm) Symbol DxL (mm) Symbol DxL (mm) Symbol DxL (mm) Symbol 5x11 E3 10x12.5 H3 16x31.5 J7 12.5x20 5 6.3x11 F3 10x16 H4 16x35.5 J8 12.5x25 6 8x11.5 G3 10x20 H5 18x35.5 K8 16x25 J6 18x40 K9 Standard Ratings 6.3 Rated voltage (V) Item Case DxL (mm) 10 16 25 35 50 63 100 Rated ripple Rated ripple Rated ripple Rated ripple Rated ripple Rated ripple Rated ripple Rated ripple Case Case Case Case Case Case Case current current current current current current current current (mArms) DxL (mm) (mArms) DxL (mm) (mArms) DxL (mm) (mArms) DxL (mm) (mArms) DxL (mm) (mArms) DxL (mm) (mArms) DxL (mm) (mArms) 2.2 3.3 4.7 10 22 33 47 100 220 330 470 1000 2200 3300 5x11 5x11 6.3x11 8x11.5 10x12.5 10x16 10x20 12.5x20 55 65 80 135 240 290 390 710 5x11 5x11 6.3x11 5x11 6.3x11 8x11.5 10x16 10x20 12.5x20 16x25 16x35.5 18x40 50 65 70 75 85 145 260 350 455 835 1500 1980 5x11 35 5x11 6.3x11 5x11 6.3x11 55 70 70 90 5x11 6.3x11 5x11 6.3x11 5x11 6.3x11 20 23 25 30 35 40 5x11 22 5x11 6.3x11 25 30 5x11 30 8x11.5 40 5x11 6.3x11 35 40 10x12.5 60 75 10x16 95 5x11 25 5x11 30 5x11 6.3x11 5x11 6.3x11 35 60 60 80 5x11 6.3x11 35 55 8x11.5 75 8x11.5 95 10x12.5 130 10x16 140 10x20 155 220 8x11.5 8x11.5 120 10x12.5 140 10x16 175 10x20 190 12.5x20 8x11.5 125 8x11.5 140 10x12.5 170 10x16 210 10x20 225 12.5x25 285 10x12.5 10x20 12.5x20 12.5x25 16x31.5 18x40 215 385 545 710 1315 2150 10x16 12.5x20 12.5x25 16x25 16x35.5 270 505 675 940 1575 10x20 12.5x25 16x25 16x31.5 18x35.5 295 550 785 1030 1690 12.5x20 16x25 16x31.5 16x35.5 18x40 380 720 965 1210 1985 12.5x25 16x31.5 16x35.5 18x35.5 415 785 1010 1295 16x25 18x40 485 930 (Note) Rated ripple current : 85, 120Hz NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. 157 CAT.No.2013/2014E Aluminum Electrolytic Capacitors for Audio Rated capacitance (F) ROS (R) MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS FOR AUDIO 6,/0,&VHULHV6LONILEHUXVLQJDXGLRSXUSRVHFDSDFLWRU +LJK*UDGH&DSDFLWRUVIRU$XGLR 6,/0,& *5((1 &$3 )RU DXGLR All lead wires oxygen-free copper for extremely low distortion. (Third high frequency distortion 10kHz,0.1A,-120dB or less) "SILMIC" mark on sleeve. )RUKLJKHUJUDGH 526 Marking color : White print on a brown sleeve )RUKLJKHUJUDGH 52% 52$ Specifications Item Performance 40 to 85 20 Less than 0.01CV or 3 whichever is larger (after 5 minutes) C : Rated capacitance (F) ; V: Rated voltage (V) Category temperature range () Tolerance at rated capacitance (%) Leakage current (A) 25 0.10 63 0.08 100 0.08 1000 hours The initial specified value or less Within 20% of initial value 150% or less of the initial specified value Test time : 1000 hours. Other have same as endurance. Voltage application treatment JIS C5101-1, -4 1998 (IEC 60384-1 1992, -4 1985) Outline Drawing Unit : mm Sleeve d0.05 copper wire (tinned) Coefficient of Frequency for Rated Ripple Current Rated voltage (V) D0.5max. 16 F0.5 25 to 35 15min. L max. 50 0.08 (20,120Hz) Test time Leakage current Percentage of capacitance change Tangent of the loss angle Shelf life (85) Applicable standards D F d 35 0.10 0.02 is added to every 1000F increase over 1000F Endurance (85) (Applied ripple current) Vent 16 0.13 Rated voltage (V) tan (max.) Tangent of loss angle (tan) (20,120Hz) (20) 6.3 2.5 0.6 8 3.5 0.6 1.5 10 5.0 0.6 50 to 100 5 min. 12.5 5.0 0.8 Frequency (Hz) CV(FxWV) All CV value 1000 1000 1000 1000 5060 120 1k 10k 100k 0.80 0.80 0.80 0.80 0.80 1 1 1 1 1 1.1 1.5 1.2 1.6 1.2 1.2 1.7 1.3 1.9 1.3 1.2 1.7 1.3 1.9 1.3 Part numbering system (example : 25V100F) 16 7.5 0.8 18 7.5 0.8 ROS 25 Series code Rated voltage symbol V 101 M Rated capacitance Capacitance symbol tolerance symbol H4 Casing symbol #5 Taping (Forming) symbol 2.0 (10,16L or less : 1.5) Case symbol Case Case Case Case Casing Casing Casing Casing DxL (mm) Symbol DxL (mm) Symbol DxL (mm) Symbol DxL (mm) Symbol 5x11 E3 10x12.5 H3 16x31.5 J7 12.5x20 5 6.3x11 F3 10x16 H4 16x35.5 J8 12.5x25 6 8x11.5 G3 10x20 H5 18x35.5 K8 16x25 J6 18x40 K9 Standard Ratings Aluminum Electrolytic Capacitors for Audio Rated voltage (V) Item Rated capacitance (F) 2.2 3.3 4.7 10 22 33 47 100 220 330 470 1000 2200 16 25 35 50 63 100 Rated ripple current Rated ripple current Rated ripple current Rated ripple current Rated ripple current Rated ripple current Case Case Case Case Case Case DxL (mm) (mArms) (mArms) (mArms) (mArms) (mArms) (mArms) DxL (mm) DxL (mm) DxL (mm) DxL (mm) DxL (mm) 6.3x11 25 8x11.5 35 6.3x11 40 6.3x11 40 10x12.5 60 8x11.5 75 8x11.5 75 10x16 95 6.3x11 55 70 80 6.3x11 6.3x11 10x12.5 130 10x16 140 10x20 155 8x11.5 95 90 120 6.3x11 8x11.5 10x16 175 10x20 190 12.5x20 220 10x12.5 140 125 140 8x11.5 8x11.5 10x16 210 10x20 225 12.5x25 285 10x12.5 170 215 270 10x12.5 10x16 12.5x20 380 12.5x25 415 16x25 485 10x20 295 385 505 10x20 12.5x20 16x25 720 16x31.5 785 18x40 930 12.5x25 550 545 675 12.5x20 12.5x25 16x31.5 965 16x35.5 1010 16x25 785 710 940 12.5x25 16x25 16x35.5 1210 18x35.5 1295 16x31.5 1030 1315 1575 16x31.5 16x35.5 18x40 1985 18x35.5 1690 2150 18x40 (Note) Rated ripple current : 85, 120Hz. CAT.No.2013/2014E 158 NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. (R) MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS FOR AUDIO *5((1 &$3 0LQLDWXUH6WDQGDUG&DSDFLWRUVIRU$XGLR ROB )RU DXGLR 721(5(; Adopting the newly developed formation method and composite electrolytic paper for audio application has reduced distortion, achieving high-quality sound. All lead wires are oxygen-free copper wires to reduce distortion. Marking color : Gold print on a black sleeve Specifications Item Performance 40 to 85 20 Less than 0.01CV or 4 whichever is larger (after 5 minutes) C : Rated capacitance (F) ; V: Rated voltage (V) Category temperature range () Tolerance at rated capacitance (%) Leakage current (A) Rated voltage (V) tan (max.) Tangent of loss angle (tan) 6.3 0.24 10 0.20 16 0.16 35 0.12 50 0.10 63 0.09 100 0.08 (20,120Hz) 0.02 is added to every 1000F increase over 1000F Test time Leakage current Percentage of capacitance change Tangent of the loss angle Endurance (85) (Applied ripple current) Shelf life (85) Applicable standards 1000 hours The initial specified value or less Within 20% of initial value 150% or less of the initial specified value Test time : 1000 hours. Other have same as endurance. Voltage application treatment JIS C5101-1, -4 1998 (IEC 60384-1 1992, -4 1985) Outline Drawing Coefficient of Frequency for Rated Ripple Current Unit : mm Rated voltage (V) Sleeve Vent (except 5) d0.05 copper wire (tinned) Frequency (Hz) CV (FxWV) D0.5max. 6.3 to 16 All CV value 1000 1000 1000 1000 F0.5 25 to 35 Lmax. 50 to 100 5 min. 15min. 5 2.0 0.6 6.3 2.5 0.6 8 3.5 0.6 10 5.0 0.6 12.5 5.0 0.8 5060 120 1k 10k 100k 0.80 0.80 0.80 0.80 0.80 1 1 1 1 1 1.1 1.5 1.2 1.6 1.2 1.2 1.7 1.3 1.9 1.3 1.2 1.7 1.3 1.9 1.3 Part numbering system (example : 25V100F) ROB D F d 25 0.14 (20,120Hz) (20) 16 7.5 0.8 Series code 18 7.5 0.8 V 25 Rated voltage symbol 101 G3 # M Rated capacitance Capacitance symbol tolerance symbol Taping (Forming) symbol Casing symbol 2.0 (10,16L or less : 1.5) 1.5 Case symbol Case DxL (mm) 5x11 6.3x11 8x11.5 Casing Symbol E3 F3 G3 Case DxL (mm) 10x12.5 10x16 10x20 Casing Symbol H3 H4 H5 Case Case Casing Symbol DxL (mm) 16x31.5 5 16x35.5 6 18x35.5 J6 18x40 DxL (mm) 12.5x20 12.5x25 16x25 Casing Symbol J7 J8 K8 K9 Standard Ratings 6.3 Rated voltage (V) Rated capacitance (F) Item 50 63 100 Rated ripple current Case Rated ripple current Case Rated ripple current Case Rated ripple current Case Rated ripple current Case Rated ripple current DxL (mm) (mArms) DxL (mm) (mArms) DxL (mm) (mArms) DxL (mm) (mArms) DxL (mm) (mArms) DxL (mm) (mArms) DxL (mm) (mArms) DxL (mm) (mArms) 5x11 50 5x11 25 5x11 10 5x11 20 5x11 25 5x11 35 5x11 6.3x11 5x11 35 5x11 40 5x11 45 5x11 50 5x11 60 5x11 60 6.3x11 75 6.3x11 80 6.3x11 35 5x11 15 5x11 25 5x11 30 6.3x11 40 60 8x11.5 70 8x11.5 100 10x12.5 120 33 5x11 55 5x11 65 5x11 70 6.3x11 80 90 8x11.5 110 8x11.5 115 10x16 160 47 5x11 65 5x11 75 6.3x11 95 6.3x11 100 8x11.5 120 8x11.5 130 10x12.5 165 10x20 210 100 6.3x11 110 6.3x11 120 8x11.5 150 165 10x12.5 210 10x16 250 10x20 285 12.5x20 340 620 8x11.5 220 8x11.5 185 8x11.5 200 10x12.5 265 10x16 310 10x20 365 12.5x20 440 12.5x20 470 16x25 330 10x12.5 265 10x12.5 200 10x16 350 10x20 410 12.5x20 500 12.5x20 540 12.5x25 620 16x31.5 820 470 10x12.5 315 10x16 380 10x20 460 12.5x20 550 12.5x25 640 16x25 800 16x25 840 18x35.5 1000 1000 10x20 550 12.5x20 670 12.5x25 810 16x25 1000 16x25 1050 2200 12.5x25 980 16x25 1200 16x25 1350 16x35.5 1650 18x35.5 1900 3300 16x25 1300 16x31.5 1600 16x35.5 1800 18x40 2100 4700 16x31.5 1700 16x35.5 1900 18x35.5 2400 6800 16x35.5 2100 18x40 2600 18x40 2800 10000 16x31.5 1200 18x35.5 1500 (Note) Rated ripple current : 85, 120Hz NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. 159 CAT.No.2013/2014E Aluminum Electrolytic Capacitors for Audio Case 4.7 35 Rated ripple current 22 3.3 25 Case 10 2.2 16 Rated ripple current 1 10 Case R2A *5((1 &$3 )RU$XGLR8OWUD0LQLDWXUL]HG 385(&$3 (R) MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS FOR AUDIO )RU DXGLR A new foil and electrolyte makes powerful and clear sound. New type ultra miniaturized capacitor for audio, using synthetic mica paper for the separator. Miniaturized 5$ 52 Marking color : White print on a black sleeve Specifications Item Performance -40 to 85 20 Less than 0.01CV or 3 whichever is larger (after 2 minutes) C : Rated capacitance (F) ; V : Rated voltage (V) Category temperature range () Tolerance at rated capacitance (%) Leakage current (A) Rated voltage (V) tan (max.) Tangent of loss angle (tan) 6.3 0.35 10 0.27 16 0.22 25 0.20 35 0.17 (20,120Hz) (20) 50 0.15 (20,120Hz) Rated voltage (V) -25/20 -40/20 Characteristics at high and low temperature 6.3 4 10 Impedance ratio (max.) 10 3 8 16 2 6 25 2 4 35 2 4 50 2 4 (120Hz) 1000 hours The initial specified value or less Within 20% of initial value 200% or less of the initial specified value Test time Leakage current Percentage of capacitance change Tangent of the loss angle Endurance (85) (Applied ripple current) Shelf life (85) Applicable standards Test time : 500 hours; other items are the same as those for the endurance. Voltage application treatment JIS C5101-1, -4 1998 (IEC 60384-1 1992, -4 1985) Outline Drawing Unit : mm Sleeve Part numbering system (example : 25V10F) d0.05 copper clad steel wire (tinned) Series code F0.5 D0.5max. R2A L max. 15min. 5 min. 5 2.0 0.45 1.0 E1 6.3 2.5 0.45 1.0 F1 25 Rated voltage symbol V 100 M D1 P6# Rated capacitance Capacitance Casing symbol tolerance symbol symbol Taping (Forming) symbol Common to R2A, R3A D F d Casing symbol 4 1.5 0.45 1.0 D1 8 3.5 0.45 1.0 G1 Standard Ratings Rated voltage (V) Rated capacitance (F) Aluminum Electrolytic Capacitors for Audio 0.33 0.47 1 2.2 3.3 4.7 10 22 33 47 100 220 330 (Note) DxL (mm) 6.3 10 16 25 35 50 4x7 4x7 4x7 4x7 4x7 5x7 6.3x7 6.3x7 8x7 4x7 5x7 6.3x7 6.3x7 8x7 4x7 5x7 4x7 5x7 6.3x7 8x7 5x7 6.3x7 8x7 6.3x7 4x7 5x7 6.3x7 8x7 items are refer to the right. CAT.No.2013/2014E 160 NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. (R) MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS FOR AUDIO *5((1 &$3 )RU$XGLR8OWUD0LQLDWXUL]HG 385(&$3 R3A )RU DXGLR A new foil and electrolyte makes powerful and clear sound. New type ultra miniaturized capacitor for audio, using synthetic mica paper for the separator. Miniaturized R3A R2A Marking color : White print on a reddish purple sleeve Specifications Item Performance 40 to 85 20 Less than 0.01CV or 3 whichever is larger (after 2 minutes) C : Rated capacitance (F) ; V : Rated voltage (V) Category temperature range () Tolerance at rated capacitance (%) Leakage current (A) 4 0.46 Rated voltage (V) tan (max.) Tangent of loss angle (tan) 6.3 0.30 10 0.26 16 0.20 25 0.17 (20,120Hz) (20) 35 0.13 50 0.11 (20,120Hz) 4 6 16 Rated voltage (V) -25/20 -40/20 Characteristics at high and low temperature Impedance ratio (max.) 6.3 4 10 10 3 8 16 2 6 25 2 4 35 2 4 50 2 4 (120Hz) 1000 hours The initial specified value or less Within 20% of initial value 200% or less of the initial specified value Test time Leakage current Percentage of capacitance change Tangent of the loss angle Endurance (85) (Applied ripple current) Shelf life (85) Applicable standards Test time : 500hours ; other items are the same as those for the endurance. Voltage application treatment JIS C5101-1, -4 1998 (IEC 60384-1 1992, -4 1985) Outline Drawing Unit : mm Sleeve d0.05 copper clad steel wire (tinned) Part numbering system (example : 35V10F) Series code F0.5 D0.5max. R3A L max. 15min. V 35 Rated voltage symbol 101 M E0 Rated capacitance Capacitance Casing symbol tolerance symbol symbol P3# Taping (Forming) symbol 5 min. Common to R2A, R3A D F d Casing symbol 4 1.5 0.45 1.0 D0 5 2.0 0.45 1.0 E0 6.3 2.5 0.45 1.0 F0 Standard Ratings Rated voltage (V) Rated capacitance (F) (Note) 4 6.3 10 16 25 35 6.3x5 4x5 5x5 6.3x5 4x5 4x5 5x5 6.3x5 4x5 5x5 4x5 5x5 5x5 6.3x5 6.3x5 50 4x5 4x5 4x5 4x5 4x5 4x5 5x5 6.3x5 items are refer to the right. NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. 161 CAT.No.2013/2014E Aluminum Electrolytic Capacitors for Audio 0.22 0.33 0.47 1 2.2 3.3 4.7 10 22 33 47 100 220 DxL (mm) RFO *5((1 &$3 0LQLDWXUH&DSDFLWRUVIRU$XGLR (R) MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS FOR AUDIO )RU DXGLR A standard capacitor utilizing a newly developed material for a high grade of audio reproduction. Copper clad steel wire is used for leads. New type miniaturized capacitor for audio, 1HZW\SH using synthetic mica paper for the separator. 5)2 5$ Marking color : Gold print on a black sleeve Specifications Item Performance 40 to 85 20 Less than 0.01CV or 3 whichever is larger (after 2 minutes) C : Rated capacitance (F) ; V : Rated voltage (V) Category temperature range () Tolerance at rated capacitance (%) Leakage current (A) 6.3 0.22 Rated voltage (V) tan (max.) Tangent of loss angle (tan) 10 0.19 16 0.16 35 0.12 50 0.10 63 0.09 100 0.08 (20,120Hz) 0.02 is added to every 1000F increase over 1000F Test time Leakage current Percentage of capacitance change Tangent of the loss angle Endurance (85) (Applied ripple current) 1000 hours The initial specified value or less Within 20% of initial value 150% or less of the initial specified value Test time : 1000 hours. Other have same as endurance. Voltage application treatment JIS C5101-1, -4 1998 (IEC 60384-1 1992, -4 1985) Shelf life (85) Applicable standards Outline Drawing Coefficient of Frequency for Rated Ripple Current Unit : mm Frequency(Hz) Rated voltage(V) Sleeve Vent (except 5) CV(FxWV) d0.05 copper clad steel wire (tinned) D0.5max. 6.3 to 16 All CV value 1000 1000 1000 1000 F0.5 25 to 35 L max. D F d 25 0.14 (20,120Hz) (20) 5 2.0 0.5 8 3.5 0.6 10 5.0 0.6 12.5 5.0 0.6 120 1k 10k 100k 0.80 0.80 0.80 0.80 0.80 1 1 1 1 1 1.1 1.5 1.2 1.6 1.2 1.2 1.7 1.3 1.9 1.3 1.2 1.7 1.3 1.9 1.3 Part numbering system (example : 25V100F) 16 7.5 0.8 RFO 18 7.5 0.8 25 Rated voltage symbol Series code V 101 M F3 P# Taping (Forming) symbol Rated capacitance Capacitance Casing symbol tolerance symbol symbol 2.0 (10,16L or less : 1.5) 1.5 5 min. 15min. 6.3 2.5 0.5 50 to 100 5060 Case symbol Casing Casing Casing Casing Case Case Case Case DxL (mm) Symbol DxL (mm) Symbol DxL (mm) Symbol DxL (mm) Symbol 5x11 E3 10x12.5 H3 16x31.5 J7 12.5x20 5 6.3x11 F3 10x16 H4 16x35.5 J8 12.5x25 6 8x11.5 G3 10x20 H5 18x35.5 K8 16x25 J6 18x40 K9 Standard Ratings 6.3 Rated voltage (V) 10 Rated ripple 16 Rated ripple 25 Rated ripple 35 Rated ripple 50 Rated ripple 63 Rated ripple 100 Rated ripple Rated ripple Aluminum Electrolytic Capacitors for Audio Case Case Case Case Case Case Case Case Item current current current current current current current current Rated DxL (mm) (mArms) DxL (mm) (mArms) DxL (mm) (mArms) DxL (mm) (mArms) DxL (mm) (mArms) DxL (mm) (mArms) DxL (mm) (mArms) DxL (mm) (mArms) capacitance (F) 5x11 15 5x11 15 1 2.2 5x11 20 5x11 25 3.3 5x11 25 5x11 30 4.7 5x11 30 5x11 30 5x11 35 5x11 35 10 5x11 45 5x11 45 5x11 50 6.3x11 22 5x11 60 5x11 70 6.3x11 85 33 5x11 55 6.3x11 47 5x11 65 6.3x11 100 5x11 85 5x11 95 220 6.3x11 150 6.3x11 165 330 6.3x11 470 50 5x11 55 5x11 60 5x11 70 5x11 80 6.3x11 100 5x11 75 5x11 85 6.3x11 110 6.3x11 120 8x11.5 120 6.3x11 5x11 8x11.5 220 8x11.5 140 8x11.5 190 250 10x12.5 330 8x11.5 8x11.5 60 110 100 10x12.5 160 150 10x16 210 210 10x12.5 260 12.5x20 380 10x16 400 10x20 460 16x25 720 180 8x11.5 240 8x11.5 270 10x12.5 370 10x16 450 10x20 540 12.5x20 650 16x25 8x11.5 260 8x11.5 280 10x12.5 390 10x16 480 10x20 590 12.5x20 740 12.5x25 850 16x31.5 10x12.5 12.5x25 880 1150 450 10x16 540 10x20 680 12.5x20 880 1050 16x25 1350 1550 2200 12.5x20 890 12.5x20 970 12.5x25 1200 16x25 1550 16x31.5 1750 16x35.5 2100 3300 12.5x20 1050 12.5x25 1250 16x25 1600 16x31.5 1950 18x35.5 2250 4700 16x25 1550 16x25 1650 16x31.5 2050 18x35.5 2500 6800 16x25 1750 16x31.5 2050 18x35.5 2550 10000 16x31.5 2150 18x35.5 2550 15000 18x35.5 2700 1000 16x31.5 (Note) Rated ripple current : 85, 120Hz CAT.No.2013/2014E 162 NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. (R) *5((1 &$3 0LQLDWXUH&DSDFLWRUVIRU$XGLR RA3 MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS FOR AUDIO )RU DXGLR With the same size as that for Series RE3 miniaturized standard capacitors, a high resolution sound quality grade has been realized. The newly developed audio use material makes Miniaturized clear sound a reality. RA3 RA2 All lead wires are copper clad steel. Marking color : White print on a brown sleeve Specifications Item Performance 40 to 85 20 Less than 0.01CV or 3 whichever is larger (after 2 minutes) C : Rated capacitance (F) ; V : Rated voltage (V) Category temperature range () Tolerance at rated capacitance (%) Leakage current (A) Rated voltage (V) tan (max.) Tangent of loss angle (tan) 6.3 0.28 10 0.24 16 0.20 35 0.14 50 0.12 63 0.11 100 0.10 (20,120Hz) 0.02 is added to every 1000F increase over 1000F Test time Leakage current Percentage of capacitance change Tangent of the loss angle Endurance (85) (Applied ripple current) Shelf life (85) Applicable standards 2000 hours The initial specified value or less Within 20% of initial value 200% or less of the initial specified value Test time : 1000 hours. Other have same as endurance. Voltage application treatment JIS C5101-1, -4 1998 (IEC 60384-1 1992, -4 1985) Outline Drawing Coefficient of Frequency for Rated Ripple Current Unit : mm Sleeve Vent (except5) Frequency (Hz) Rated voltage(V) d0.05 copper clad steel wire (tinned) CV (FxWV) L max. 5 2.0 0.5 6.3 2.5 0.5/0.6 1k 10k 100k 1 1 1 1 1 1.1 1.5 1.2 1.6 1.2 1.2 1.7 1.3 1.9 1.3 1.2 1.7 1.3 1.9 1.3 50 to 100 Part numbering system (example : 25V100F) 10 5.0 0.6 12.5 5.0 0.6 16 7.5 0.8 18 7.5 0.8 RA3 25 Rated voltage symbol Series code 2.0 (10,16L or less : 1.5) 1.5 120 0.80 0.80 0.80 0.80 0.80 5 min. 15min. 8 3.5 0.6 5060 All CV value 1000 1000< 1000 1000< 25 to 35 F0.5 D0.5max. 6.3 to 16 D F d 25 0.16 (20,120Hz) (20) V 101 M F3 #8 Rated capacitance Capacitance symbol tolerance symbol Taping (Forming) symbol Casing symbol Case symbol Case Case Case Case Casing Casing Casing Casing DxL (mm) Symbol DxL (mm) Symbol DxL (mm) Symbol DxL (mm) Symbol 10x12.5 H3 J7 5x11 E3 12.5x20 5 16x31.5 6.3x11 F3 10x16 H4 12.5x25 6 18x35.5 K8 8x11.5 G3 10x20 H5 16x25 J6 Standard Ratings 6.3 Rated voltage (V) 10 Rated ripple 16 Rated ripple 25 Rated ripple 35 Rated ripple 50 Rated ripple 63 Rated ripple 100 Rated ripple Rated ripple Case Case Case Case Case Case Case Item Case current current current current current current current current Rated DxL (mm) (mArms) DxL (mm) (mArms) DxL (mm) (mArms) DxL (mm) (mArms) DxL (mm) (mArms) DxL (mm) (mArms) DxL (mm) (mArms) DxL (mm) (mArms) capacitance (F) 5x11 21 5x11 21 1 5x11 31 5x11 31 3.3 5x11 38 5x11 40 4.7 5x11 50 5x11 45 10 5x11 50 5x11 55 5x11 60 5x11 66 5x11 70 5x11 70 22 5x11 75 5x11 90 5x11 95 5x11 100 5x11 105 6.3x11 115 33 5x11 110 5x11 110 5x11 110 5x11 110 6.3x11 130 8x11.5 47 5x11 130 5x11 130 5x11 130 6.3x11 155 6.3x11 160 8x11.5 100 5x11 130 5x11 150 5x11 180 6.3x11 199 6.3x11 214 8x11.5 220 5x11 240 6.3x11 250 6.3x11 280 8x11.5 349 8x11.5 350 10x12.5 429 330 6.3x11 300 6.3x11 330 8x11.5 383 8x11.5 383 10x12.5 542 10x16 595 470 6.3x11 380 8x11.5 417 8x11.5 480 10x12.5 545 10x16 664 12.5x20 12.5x25 250 8x11.5 158 188 270 10x16 358 10x16 505 12.5x20 663 10x20 676 12.5x25 886 887 12.5x20 924 16x25 1230 18x35.5 2210 580 10x12.5 650 10x16 791 10x20 996 12.5x20 1210 1400 16x25 1710 2200 10x16 939 10x20 1080 12.5x20 1350 12.5x25 1660 16x25 1950 16x31.5 2340 18x35.5 2870 3300 16x20 1230 12.5x20 1430 12.5x25 1690 16x25 2030 16x31.5 2320 18x35.5 2810 4700 12.5x20 1710 12.5x25 1780 16x25 2100 16x31.5 2650 18x35.5 2290 6800 12.5x25 1930 16x25 2270 16x31.5 2480 18x35.5 3290 10000 16x25 2450 16x31.5 2500 18x35.5 3130 15000 16x31.5 2580 18x35.5 3100 22000 18x35.5 3150 1000 8x11.5 (Note) Rated ripple current : 85, 120Hz NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. 163 CAT.No.2013/2014E Aluminum Electrolytic Capacitors for Audio 2.2 RW5 *5((1 &$3 )RU$XGLR0LQLDWXUH&DSDFLWRUV (R) MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS FOR AUDIO Y& KRXUV )RU $XGLR With the same size as that for Series RJ5 miniaturized standerd capacitors, a high resolution sound quality grade has been realized. Guarantees 1000 hours at 105 +LJKWHPSHUDWXUH 5: 5$ Marking color : Gold print on a black sleeve Specifications Item Performance 55 to 105 20 Category temperature range () Tolerance at rated capacitance (%) (20,120Hz) Less than 0.03CV or 4 whichever is larger (after 1 minutes) C : Rated capacitance (F) , V : Rated voltage (V) Leekage current (A) Rated voltage (V) tan (max.) Tangent of loss angle (tan) (20) 16 0.24 25 0.20 0.02CV is added to every 1000F increase over 1000F (20,120Hz) Rated voltage (V) -25/20 Impedance ratio (max.) -40/20 Characteristics at high and low temperature 16 3 6 25 2 4 (120Hz) Test time Leakage current Percentage of capacitance change Tangent of the loss angle Endurance (105) (Applied ripple current) 1000 hours The initial specified value or less Within 20% of initial value 200% or less of the initial specified value Test time : 1000 hours; Other have same as endurance. Voltage application treatment JIS C5101-1, -4 1998 (IEC 60384-1 1992, -4 1985) Shelf life (105) Applicable standerds Outline Drawing Coefficient of Frequency for Rated Ripple Current Unit : mm d0.05 copper clad steel wire (tinned) Sleeve F0.5 D0.5max Vent (except 5) Lmax. 15min. Frequency (Hz) Rated Capacitance (F) 5060 120 1k 10k 100k 100 to 220 330 to 1000 1200 to 15000 0.8 0.8 0.8 1 1 1 1.2 1.2 1.1 1.3 1.2 1.1 1.4 1.3 1.1 Part numbering system (example : 16V3300F) 5 min. RW5 Series code D F d 5 2.0 0.5 1.0 6.3 2.5 0.5 1.0 8 3.5 0.6 1.0 10 5.0 0.6 2.0 12.5 5.0 0.6 2.0 16 7.5 0.8 2.0 16 Rated voltage symbol V 332 M Rated capacitance Capacitance symbol tolerance symbol 6 Casing symbol # Taping (Forming) symbol 18 7.5 0.8 2.0 Standard Ratings Rated voltage (V) Aluminum Electrolytic Capacitors for Audio Item Rated capacitance (F) 100 220 330 470 1000 2200 3300 4700 6800 10000 15000 16 Case Casing DxLmm symbol Rated ripple current mArms 6.3x11.5 6.3x11.5 8x12 10x12.5 F3 F3 G3 H3 190 225 323 500 10x20 H5 710 12.5x25 16x20 16x25 18x20 16x25 18x20 16x35.5 18x40 6 J5 J6 K5 J6 K5 J8 K9 1200 1250 1500 1460 1600 1560 1930 2210 25 Case Casing DxLmm symbol E3 5x11.5 F3 6.3x11.5 G3 8x12 H3 10x12.5 H4 10x16 12.5x25 6 16x20 J5 18x16 K4 J6 16x25 18x20 K5 J6 16x25 K5 18x20 J8 16x35.5 K7 18x31.5 K9 18x40 Rated ripple current mArms 125 200 310 429 610 1180 1230 1200 1440 1400 1570 1530 1850 1870 2000 (Note) Rated ripple current : 105, 120Hz. CAT.No.2013/2014E 164 NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. (R) MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS FOR AUDIO *5((1 &$3 0LQLDWXUH%LSRODU&DSDFLWRUVIRU$XGLR RBD )RU DXGLR The newly developed audio use foil and special electrolyte makes clear and far-carrying sound a reality. All lead wires are copper clad steel. Tone quality improvements RBD R2B Marking color : Gold print on a black sleeve Specifications Item Performance 40 to 85 20 Less than 0.01CV or 4 whichever is larger (after 2 minutes) C : Rated capacitance (F); V : Rated voltage (V) Category temperature range () Tolerance at rated capacitance (%) Leakage current (A) Rated voltage (V) tan (max.) Tangent of loss angle (tan) (20,120Hz) (20) 6.3 0.24 10 0.20 16 0.16 25 0.15 35 0.14 50 0.12 63 0.10 6.3 4 10 10 3 8 16 2 6 25 2 4 35 2 3 50 2 3 63 2 3 100 0.09 (20,120Hz) 0.02 is added to every 1000F increase over 1000F. Rated voltage (V) Impedance ratio -25/20 (max.) -40/20 Characteristics at high and low temperature 100 2 3 0.5 for -25 C, 1 for -40 C are added to every 1000F increase over 1000F. Test time Leakage current Percentage of capacitance change Tangent of the loss angle Endurance (85) (Applied ripple current) 250h x 8 The initial specified value or less Within 20% of initial value 150% or less of the initial specified value JIS C5101-1, -4 1998 (IEC 60384-1 1992, -4 1985) Applicable standards Outline Drawing Coefficient of Frequency for Rated Ripple Current Unit : mm Sleeve Frequency (Hz) Rated voltage (V) 6.3 to 16 25 to 35 50 to 100 d0.05 copper clad steel wire (tinned) F0.5 D0.5max. Vent (except5) L max. D F d (120Hz) 5 2.0 0.5 6.3 2.5 0.5 8 3.5 0.6 10 5.0 0.6 1k 10k100k 1 1 1 1.1 1.5 1.6 1.2 1.7 1.9 RBD 16 7.5 0.8 Series code 18 7.5 0.8 10 Rated voltage symbol V 102 M 5 Rated capacitance Capacitance symbol tolerance symbol # Taping (Forming) symbol Casing symbol 2.0 (10,16L or less : 1.5) 1.5 12.5 5.0 0.6 120 0.8 0.8 0.8 Part numbering system (example : 10V1000F) 5 min. 15min. 5060 Case symbol Case Case Case Case Casing Casing Casing Casing DxL (mm) Symbol DxL (mm) Symbol DxL (mm) Symbol DxL (mm) Symbol 5x11 E3 10x12.5 H3 12.5x20 5 16x31.5 J7 6.3x11 F3 10x16 H4 12.5x25 6 16x35.5 J8 8x11.5 G3 10x20 H5 16x25 J6 18x35.5 K8 18x40 K9 Standard Ratings Rated voltage (V) Item 6.3 Case DxL (mm) 10 Rated ripple current Case 16 Rated ripple current Case 25 Rated ripple current Case 35 Rated ripple current Case 50 Rated ripple current Case 63 Rated ripple current Case 100 Rated ripple current Case Rated ripple current (mArms) DxL (mm) (mArms) DxL (mm) (mArms) DxL (mm) (mArms) DxL (mm) (mArms) DxL (mm) (mArms) DxL (mm) (mArms) DxL (mm) (mArms) 0.47 5x11 10 5x11 11 1 5x11 14 5x11 16 2.2 5x11 21 5x11 23 5x11 24 3.3 5x11 26 5x11 28 6.3x11 34 4.7 6.3x11 10 5x11 39 5x11 28 5x11 28 5x11 31 5x11 34 5x11 40 5x11 42 5x11 45 6.3x11 57 6.3x11 8x11.5 41 70 5x11 52 5x11 58 5x11 60 6.3x11 71 77 8x11.5 89 10x16 136 33 5x11 58 5x11 63 5x11 71 6.3x11 84 6.3x11 87 8x11.5 111 10x12.5 144 10x20 181 47 5x11 69 5x11 75 6.3x11 97 6.3x11 100 8x11.5 122 10x12.5 157 10x16 188 12.5x20 248 100 6.3x11 115 6.3x11 126 8x11.5 10x12.5 212 10x20 273 12.5x20 343 16x25 458 18x35.5 837 22 167 10x12.5 204 220 8x11.5 202 8x11.5 221 10x12.5 294 10x16 332 10x20 375 12.5x25 506 16x25 645 330 8x11.5 247 10x12.5 322 10x16 394 10x20 444 12.5x20 526 12.5x25 620 470 10x12.5 350 10x16 420 10x20 513 12.5x20 607 12.5x25 685 16x25 861 1000 10x20 611 12.5x20 767 12.5x25 935 16x25 1120 1270 2200 12.5x25 1090 16x25 1380 1660 3300 16x25 1490 16x31.5 1760 4700 16x31.5 1880 18x35.5 2280 16x31.5 16x31.5 (Note) Rated ripple current : 85, 120Hz NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. 165 CAT.No.2013/2014E Aluminum Electrolytic Capacitors for Audio Rated capacitance (F) LAO LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS FOR AUDIO (R) *5((1 &$3 3RZHU6XSSO\6PRRWKLQJ8VH6WDQGDUG&DSDFLWRUV )RU DXGLR Best suited as power supply filters for sound quality priority audio equipment. Printed circuit board terminal snap-in type. For audio LAO LA5 Marking color : Gold print on a black sleeve Specifications Performance 40 to 85 20 Less than 0.03CV or 5mA whichever is smaller (after 5 minutes) C : Rated capacitance (F), V : Rated voltage (V) Item Category temperature range () Tolerance at rated capacitance (%) Leakage current (A) Rated voltage (V) tan (max.) Tangent of loss angle (tan) Characteristics at high and low temperature 16 0.40 25 0.40 (20,120Hz) (20) 50 to 100 0.30 35 0.35 (20,120Hz) Rated voltage (V) Impedance ratio -25/+20 -40/+20 (max.) 16 to 35 4 15 50 to 100 3 10 (120Hz) Endurance (85) (Applied ripple current) 1000 hours The initial specified value or less Within 20% of initial value 150% or less of the initial specified value Test time Leakage current Percentage of capacitance change Tangent of the loss angle Test time : 1000 hours. Other have same as endurance. Voltage application treatment JIS C5101-1, -4 1998 (IEC 60384-1 1992, -4 1985) Shelf life (85) Applicable standards Outline Drawing Unit : mm Rated voltage (V) 50 or less 63 to 100 Lug terminal details 2-2 Sleeve Coefficient of Frequency for Rated Ripple Current Frequency (Hz) Printed circuit board snap-in type (Series LAO) 50 120 1k 10k 20k 0.95 0.95 1 1 1.10 1.16 1.15 1.30 1.15 1.33 0.9 4.7 1.50.1 Markings kings 5.4 D1max. 1 0. 10 10 0.90.1 Thickness : 0.8t Part numbering system (example : 63V6800F) LAO L2max. Vent 4.00.5 Position of PC board holes ()Negative terminal indicated by cross notching 2.1 (For 4.00.5) Series code 63 Rated voltage symbol V 682 M Rated capacitance Capacitance symbol tolerance symbol S57 PX # Casing symbol B Optional symbol Aluminum Electrolytic Capacitors for Audio CAT.No.2013/2014E 166 NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS FOR AUDIO (R) LAO Standard Ratings 16 Rated voltage (V) 25 35 50 63 80 100 Rated ripple Rated ripple Rated ripple Rated ripple Rated ripple Rated ripple Rated ripple Rated Rated Rated Rated Rated Rated Rated Item capacitance current current current current current current current capacitance capacitance capacitance capacitance capacitance capacitance Case Casing xL (mm) symbol F Arms F Arms F Arms F Arms F Arms F Arms F Arms 22x20 S21 3300 1.2 22x25 S22 4700 1.5 2200 1.0 1500 0.8 1000 0.8 680 0.7 22x30 S23 3300 1.3 2200 1.3 1500 1.1 1000 0.9 680 0.7 22x35 S24 2.0 4700 1.7 3300 1.7 1500 1.2 1000 1.0 680 0.8 22x40 S25 22x45 S26 10000 2.7 22x50 S27 25x25 S32 3300 1.7 25x30 S33 6800 2.5 4700 2.1 25x35 S34 10000 3.2 25x40 S35 25x45 S36 25x50 S37 10000 3.0 6800 2.6 4700 2.4 3300 2.0 2200 2.0 1500 1.8 30x25 S42 6800 2.6 4700 2.2 3300 2.3 2200 1.9 1500 1.6 1000 1.3 680 1.1 30x30 S43 10000 3.3 6800 2.7 4700 2.8 3300 2.4 2200 1.9 1500 1.6 1000 1.4 30x35 S44 30x40 S45 10000 3.1 2.7 4700 2.4 3300 2.1 2200 2.1 1500 1.8 30x45 S46 30x50 S47 10000 3.4 6800 3.1 4700 2.6 3300 2.2 2200 1.8 35x25 S52 10000 3.4 6800 2.8 4700 2.9 3300 2.4 2200 2.0 1500 1.7 1000 1.5 35x30 S53 10000 3.1 6800 2.7 4700 2.5 3300 2.1 2200 2.1 1500 1.8 35x35 S54 35x40 S55 10000 3.5 6800 3.1 4700 2.6 3300 2.2 2200 1.8 35x45 S56 35x50 S57 6800 3.3 4700 2.7 6800 6800 6800 2.2 2.7 2200 1.5 2.3 2200 1.6 3300 2.0 1500 1.3 1000 1.2 2200 1.7 1500 1.4 1000 1.2 680 1.0 3300 2.2 2200 1.8 1500 1.5 1000 1.2 680 1.1 4700 4700 6800 2.8 3300 2.3 2200 1.9 1500 1.6 1000 1.4 (Note) Rated ripple current : 85, 120Hz. Aluminum Electrolytic Capacitors for Audio NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. 167 CAT.No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x)P 7KH GLHOHFWULF FRQVWDQW RI DQ DOXPLQXP R[LGH ILOP LV WR /DUJHU FDSDFLWDQFHV FDQ EH REWDLQHG E\ HQ ODUJLQJWKHHOHFWURGHDUHD6RUUHGXFLQJW 7DEOHVKRZVWKHGLHOHFWULFFRQVWDQWVRIW\SLFDOGLHO HFWULFVXVHGLQWKHFDSDFLWRU,QPDQ\FDVHVFDSDFLWRU QDPHVDUHGHWHUPLQHGE\WKHGLHOHFWULFPDWHULDOXVHG IRUH[DPSOHDOXPLQXPHOHFWURO\WLFFDSDFLWRUWDQWDOXP FDSDFLWRUHWF Aluminum Electrolytic Capacitors for Audio 7DEOH 'LHOHFWULF 'LHOHFWULF&RQVWDQW 'LHOHFWULF 'LHOHFWULF&RQVWDQW $OXPLQXPR[LGHILOP WR 3RUFHODLQ FHUDPLF WR 0\ODU 0LFD WR 3RO\VW\UHQH 7DQWDOXPR[LGHILOP WR $OWKRXJK WKH DOXPLQXP HOHFWURO\WLF FDSDFLWRU LV VPDOO LWKDVDODUJHFDSDFLWDQFH,WLVEHFDXVHWKHHOHFWURGH DUHD LV URXJKHQHG E\ HOHFWURFKHPLFDO HWFKLQJ HQ ODUJLQJ WKH HOHFWURGH DUHD DQG DOVR EHFDXVH WKH GLH OHFWULFLVYHU\WKLQ 7KHVFKHPDWLFFURVVVHFWLRQRIWKHDOXPLQXPHOHFWURO \WLFFDSDFLWRULVDVLQ)LJ CAT.No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x :KHUH//LIHDWWHPSHUDWXUH7 //LIHDWWHPSHUDWXUH7 7KHHIIHFWVWRWKHOLIHE\GHUDWLQJRIWKHDSSOLHGYROWDJH HWF DUH QHJOHFWHG EHFDXVH WKH\ DUH VPDOO FRPSDUHG WRWKDWE\WKHWHPSHUDWXUH 168 NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. TECHNICAL NOTE ALUMINUM ELECTROLYTIC CAPACITORS (R) (VWLPDWLRQRIOLIHFRQVLGHULQJWKHULSSOHFXUUHQW 7KH ULSSOH FXUUHQW DIIHFWV WKH OLIH RI D FDSDFLWRU EHFDXVH WKH LQWHUQDO ORVV (65 JHQHUDWHV KHDW 7KH JHQHUDWHGKHDWZLOOEH 3,5 :KHUHO5LSSOHFXUUHQW $UPV 5(65 :LWKLQFUHDVHLQWKHWHPSHUDWXUHRIWKHFDSDFLWRU ,5 7 $+ :KHUH 77HPSHUDWXUHLQFUHDVHLQWKHFDSDFLWRU FRUH GHJ ,5LSSOHFXUUHQW $UPV 5(65 $ 6XUIDFHDUHDRIWKHFDSDFLWRU FP +5DGLDWLRQFRHIILFLHQW $SSUR[x :FPx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x. //Ux :KHUH/U/LIHDWWKHXSSHUFDWHJRU\WHPSHUDWXUH ZLWKWKHUDWHGULSSOHFXUUHQW K 7 7HPSHUDWXUHLQFUHDVHDWFDSDFLWRUFRUH DWWKHXSSHUFDWHJRU\WHPSHUDWXUH GHJ 7KHOLIHHTXDWLRQFRQVLGHULQJWKHDPELHQWWHPSHU DWXUH DQG WKH ULSSOH FXUUHQW ZLOO EH D FRQYHUVLRQ RI WKHDERYHHTXDWLRQ DVEHORZ ) ) , 7 7 7 x , //Ux x. :KHUHO5DWHGULSSOHFXUUHQWDWWKHXSSHUFDWHJRU\ WHPSHUDWXUH $UPV ,$SSOLHGULSSOHFXUUHQW $UPV 6LQFHLWLVDFWXDOO\GLIILFXOWWRPHDVXUHWKHWHPSHUDWXUH LQFUHDVH DW WKH FDSDFLWRU FRUH WKH IROORZLQJ WDEOH LV SURYLGHGIRUFRQYHUVLRQIURPWKHVXUIDFHWHPSHUDWXUH LQFUHDVHWRWKHFRUHWHPSHUDWXUHLQFUHDVH Table 2-1 Case diameter 10 12.516 18 22 25 30 35 Core / Surface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esign, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. 169 $PELHQWWHPSHUDWXUHRIFDSDFLWRU ) ) Aluminum Electrolytic Capacitors for Audio ) 7 7 7 //Gx x. :KHUH/G/LIHDW'&RSHUDWLRQ K .5LSSOHDFFHOHUDWLRQIDFWRU .ZLWKLQDOORZDEOHULSSOHFXUUHQW .LIH[FHHGLQJDOORZDEOHULSSOHFXUUHQW 78SSHUFDWHJRU\WHPSHUDWXUH 72SHUDWLQJWHPSHUDWXUH 77HPSHUDWXUHLQFUHDVHDWFDSDFLWRUFRUH GHJ Y& KRXUJXDUDQWHHG Y& KRXUJXDUDQWHHG Y& KRXUJXDUDQWHHG Y& KRXUJXDUDQWHHG Y& KRXUJXDUDQWHHG Y& KRXUJXDUDQWHHG Y& KRXUJXDUDQWHHG Y& KRXUJXDUDQWHHG Y& KRXUJXDUDQWHHG Y& KRXUJXDUDQWHHG Y& KRXUJXDUDQWHHG Y& KRXUJXDUDQWHHG K K <HDU CAT.No.2013/2014E TECHNICAL NOTE ALUMINUM ELECTROLYTIC CAPACITORS 7RFDOFXODWH%DODQFHZKHQFRQQHFWLQJLQ VHULHV &LUFXLWOD\RXW &LUFXLWIRUFRQQHFWLQJWZRFDSDFLWRUV && LQVHULHV DQGHTXLYDOHQWFLUFXLWFDQEHLOOXVWUDWHGDVEHORZILJXUH )RUPXODWRFDOFXODWHDEDODQFHUHVLVWDQFH5%RIEHORZ ILJXUHLVVKRZQDVIROORZV (R) If a0.8, 400(V)x2x0.8640(V) as an impressed YROWDJH If b2, R2b R1426(k), LC0.94(mA). %DODQFHUHVLVWDQFH5%ZLOOEH RB 2x2x213(k) (1-0.8) N (2x0.8)x2-1 5HJDUGLQJ5HFRYHU\9ROWDJH & 5% 5% 5 9 9 & 5% 5 5% 9 )ROORZLQJDUHWKHSUHFRQGLWLRQVRIWKHFLUFXLW 9VKDOOEHWKHUDWHGYROWDJH 9 99 9VKDOOEHDWLPHV9x9D9 D 5VKDOOHTXDO5xE E )RUPXODVWRFDOFXODWH>5%@ )ROORZLQJ IRUPXOD FDQ EH HVWDEOLVKHG IURP EDODQFHGFRQGLWLRQ 9 9 5 5% 5 5% )ROORZLQJ IRUPXOD FDQ EH HVWDEOLVKHG IURP SUHFRQGLWLRQV 99 99-9 D9-9 3XWIRUPXODV DQG LQIRUPXOD E55% 55% 9 55% E55% DE9 55% 9^E 55% E55% DE 55% E5 E 5% $FFRUGLQJO\ EDODQFH UHVLVWDQFH 5 VKDOO EH WKH IROORZLQJIRUPXOD D9-9 Aluminum Electrolytic Capacitors for Audio 5%2b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o.2013/2014E N 170 NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. ALUMINUM ELECTROLYTIC CAPACITORS (R) TECHNICAL NOTE (OHFWURGH)RLO'HYHORSPHQW7HFKQRORJ\ 7LPH K )LJ +LJKUHOLDELOLW\FDSDFLWRUV +LJKUHOLDELOLW\FDSDFLWRUV 5HIHUHQFH )LJ 6HDOLQJPDWHULDOSHUPHDELOLW\RIHOHFWURO\WH 7RHQVXUHORQJOLIHDORZSHUPHDEOHODFWRQHVROYHQWIRU WKHVHDOLQJPDWHULDOLVXVHGDVWKHPDLQVROYHQWRIWKH HOHFWURO\WHRIWKH+LJKUHOLDELOLW\FDSDFLWRU)LJVKRZV WKHWHVWUHVXOWVRQWKHSHUPHDELOLW\REWDLQHGE\FKDQJ LQJWKHZHLJKWRIWKHFDSDFLWRUVSURGXFHGZLWKGLIIHUHQW W\SHVRIHOHFWURO\WHVDWDKLJKWHPSHUDWXUH +LJKUHOLDELOLW\FDSDFLWRUV $PLGLFVROYHQW 5HIHUHQFH 7LPH K )LJ 'LHOHFWULFIRUPDWLRQYROWDJHDQGOHDNDJHFXUUHQW FKDUDFWHULVWLFVRIDQRGHIRLO 7R LQFUHDVH WKH RSHUDWLQJ OLIH E\ FRQWUROOLQJ WKH JDV JHQHUDWLRQLQVLGHFDSDFLWRUEHFDXVHRIWRWLPHV WKHUDWHGYROWDJHZKLOHWKDWRIWKHSUHYLRXVFDSDFLWRU LVDERXWWLPHVWKHUDWHGYROWDJH /DFWRQLFSURGXFW /& $ ([SRQHQWRIZHLJKWFKDQJHV ([SRQHQWRIUHVLVWLYLW\ 5HVLVWDQFH : 5HIHUHQFH /RQJWLPHVWDELOLW\RIHOHFWURO\WH 7KHHOHFWURO\WHXVHGLQWKH+LJKUHOLDELOLW\FDSDFLWRULVVWD EOH ZLWK ORZ LQLWLDO UHVLVWLYLW\ DQG VPDOO VHFXODU FKDQJHV DW D KLJK WHPSHUDWXUH )LJ VKRZV FKDQJHLQUHVLVWLYLW\DW& +LJKUHOLDELOLW\FDSDFLWRUV ([SRQHQWRIZHLJKWFKDQJHV &RUURVLRQLQKLELWLRQRIFDWKRGHIRLO ,QDFWLYHWUHDWPHQWLVLPSOHPHQWHGWRHQVXUHORQJOLIHE\ LQKLELWLQJQDWXUDOFRUURVLRQRIWKHFDWKRGHIRLO)LJ VKRZV LWV HIIHFWV ZLWK YDOXHV RI WKH SRODUL]DWLRQ UHVLVWDQFHLQYHUVHO\SURSRUWLRQDOWRWKHFRUURVLRQUDWH XVLQJWKH$&LPSHGDQFHPHWKRG )5$ 7KLVLQGLFDWHV WKDWWKHFDWKRGHIRLOXVHGLQWKH+LJKUHOLDELOLW\FDSDFLWRUV KDVWKHSRODUL]DWLRQUHVLVWDQFHKLJKHUWKDQWKDWRIWKH FRQYHQWLRQDOFDSDFLWRUVRZLQJWRFRUURVLRQLQKLELWLRQ 7LPH K )LJ 9ROWDJHUDWLR NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. 171 /RZHUHG(65RI(OHFWURGH)RLO 7R UHGXFH WKH (65 RI HOHFWURO\WLF FDSDFLWRU ZH KDYH LPSURYHG RXU FKHPLFDO FRQYHUVLRQ WHFKQRORJ\ IRU DQRGHIRLOWRGHYHORSORZHU(65HOHFWURGHIRLOFRPSDUHG WRWKHFRQYHQWLRQDOSURGXFWDVVKRZQLQ)LJ +LJKUHOLDELOLW\FDSDFLWRUV (65,QGH[ 5HIHUHQFH )LJ(65,QGH[RI$QRGH)RLO CAT.No.2013/2014E Aluminum Electrolytic Capacitors for Audio )LJ $LUWLJKWQHVVRIVHDOLQJPDWHULDO 6LQFHWKHHOHFWURO\WHLVVWDEOHIRUKRXUVWKHNH\HOHPHQW IRUFDSDFLWRUVOLIHLVWKHVHDOLQJPDWHULDO%\RSWLPL]LQJ WKH FURVVOLQNLQJ GHQVLW\ RI WKH VHDOLQJ PDWHULDO SRO\PHU WKHVHDOLQJPDWHULDORIWKH+LJKUHOLDELOLW\FDSDFLWRUDWWDLQV LWVORQJOLIHZLWKHOHFWURO\WHSHUPHDELOLW\OHVVWKDQWKDWRI WKHFRQYHQWLRQDOFDSDFLWRUV )LJ VKRZV WKH WHVW UHVXOWV RQ WKH DLUWLJKWQHVV RI WKH VHDOLQJ PDWHULDO REWDLQHG E\ FKDQJLQJ WKH ZHLJKW RI WKH FDSDFLWRUV DW D KLJK WHPSHUDWXUH SURGXFLQJ FDSDFLWRUV ZLWK WKH FRQYHQWLRQDO VHDOLQJ PDWHULDO DQG LPSURYHG RQH ERWK FRQWDLQLQJ WKH HOHFWURO\WH XVHG LQ WKH+LJKUHOLDELOLW\FDSDFLWRU TECHNICAL DATA ALUMINUM ELECTROLYTIC CAPACITORS (R) (OHFWULF&KDUDFWHULVWLFV'DWD 6HULHV5-)5-%5-' )UHTXHQF\FKDUDFWHULVWLFVDWY& 10 Series RJF RJD Rated Voltage 35V 35V Capacitance 680F 680F Size (xL) 12.5x20 12.5x20 Impedance Spec. (20, 100kHz) 0.017 0.038 RJF RJB Rated Voltage 10V 10V Capacitance 1000F 1000F Size (xL) 10x16 10x16 Impedance Spec. (20, 100kHz) 0.038 0.080 Performanse Series R J F Series R J D Impedance () 1 0.1 0.01 0.1 1k 10k Frequency (Hz) 100k 1M 10 Series Performanse Series R J F Series R J B Impedance () 1 0.1 0.01 100 1k 10k 100k 1M Frequency (Hz) )UHTXHQF\FKDUDFWHULVWLFVDWY&Y& (QGXUDQFH $SSOLHGULSSOHFXUUHQW DWY& Series R J D Series Ratings Case size Temp () RJD 35V 820F 12.5x20L -10 RJD 35V 820F 12.5x20L 20 1 Impedance () 12.5x20L 35V820F 1700mArms 100kHz n10 5 0 -5 -10 -15 -20 0 2000 4000 6000 8000 10000 2000 4000 6000 8000 10000 2000 4000 6000 8000 10000 tan 0.24 0.1 0.01 100 1k 10k 100k Leakage Current (A) Aluminum Electrolytic Capacitors for Audio Capacitance change (%) 10 1M Frequency (Hz) 0.20 0.16 0.12 0.08 0.04 0.00 0 150 120 90 60 30 0 0 Life Time (h) Notice : The mesurment values are not guaranteed values, but measurements. CAT.No.2013/2014E 172 NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. TECHNICAL DATA ALUMINUM ELECTROLYTIC CAPACITORS (R) 6HULHV59' )UHTXHQF\FKDUDFWHULVWLFVDWY& (QGXUDQFH $SSOLHGULSSOHFXUUHQW DWY& n=10 Series Ratings Case size RVD 6.3V1500F 10x10.5L RVZ 6.3V1000F 10x10.5L RVJ 6.3V 470F 10x10.5L Capacitance change (%) 10 Impedance () 1 Series Ratings Case size RVD 6.3V220F 6.3x5.8L 0 10 20 30 0 500 1000 1500 2000 0 500 1000 1500 2000 0 500 1000 1500 2000 0.60 0.50 tan 0.1 0.40 0.30 0.20 0.10 0.00 1k 10k 100k 1M Leakage Current (A) 0.01 100 Frequecy (Hz) )UHTXHQF\FKDUDFWHULVWLFVDWY&Y& 100 Series Ratings Case size Temp ( C) RVD 6.3V220F 6.3x5.8L 20 RVD 6.3V220F 6.3x5.8L 40 15 10 5 0 Life Time (h) Impedance () 10 1 0.1 100 1k 10k 100k 1M Frequency (Hz) 6HULHV5.' 12.5x25L 0 16V1000F 7HPSHUDWXUH&KDUDFWHULVWLFV 15 20 2000 4000 6000 8000 10000 Capacitance change (%) 10 0.24 0.20 tan 16V1000F 30 5 0 12.5x25L n=10 20 10 0 10 20 30 40 60 0.16 40 20 0 20 40 60 80 100 80 100 120 Temperature ( C) 0.12 0.08 10 0.04 0.00 2000 4000 6000 8000 10000 1 tan Leakage Current (A) 0 150 120 90 0.1 60 30 0.01 0 0 2000 4000 6000 8000 10000 Life Time (h) NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. 60 40 20 0 20 40 60 120 Temperature ( C) Notice : The mesurment values are not guaranteed values, but measurements. 173 CAT.No.2013/2014E Aluminum Electrolytic Capacitors for Audio Capacitance change (%) (QGXUDQFH $SSOLHGULSSOHFXUUHQW DWY& TECHNICAL DATA ALUMINUM ELECTROLYTIC CAPACITORS (R) 6HULHV/$7/$+ Series Ratings Case size Series Ratings Case size LAT 200V560F 25x30L LAT 400V150F 25x30L LAH 200V470F 25x30L LAH 400V120F 25x30L 20 20 10 10 Capacitance change (%) Capacitance change (%) 7HPSHUDWXUHFKDUDFWHULVWLFV6HULHV/$7/$+ 0 -10 -20 -30 -40 -10 -20 -30 -40 5 Tangent of loss angle Tangent of loss angle 5 0 1 0.5 1 0.5 0.1 0.1 0.05 0.05 0.01 -55 -40 -25 20 0.01 85 105 -55 -40 -25 -20 85 105 Temperature () Temperature () Series Ratings Case size Rated Ripple current 120Hz Series LAT 160V470F 25x30L 1.70Arms LAT 200V2200F 35x50L 3.78Arms LAH 160V390F 25x30L 1.43Arms LAH 200V1800F 35x50L 2.70Arms 0 Capacitance change (%) Capacitance change (%) (QGXUDQFH $SSOLHGULSSOHFXUUHQW DW&RI6HULHV/$7/$+ -10 -20 -30 Tangent of loss angle 0.1 0.05 Rated Ripple current 120Hz 0 -10 -20 -30 0.1 0.05 0.01 0.01 50 50 Leakage current (A) Aluminum Electrolytic Capacitors for Audio Tangent of loss angle Case size 0.5 0.5 Leakage current (A) Ratings 10 5 1 10 5 1 0 1000 2000 3000 4000 5000 0 Time (h) 1000 2000 3000 4000 5000 Time (h) Notice : The mesurment values are not guaranteed values, but measurements. CAT.No.2013/2014E 174 NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. ALUMINUM ELECTROLYTIC CAPACITORS (R) TECHNICAL DATA 6HULHV/$; 7HPSHUDWXUHFKDUDFWHULVWLFV6HULHV/$; Series Ratings Case size LAX 200V1000F 30 x 50L 20 20 10 10 Capacitance change (%) Capacitance change (%) 0 -10 -20 -30 -40 Tangent of loss angle Tangent of loss angle Ratings Case size LAX 400V330F 35 x 50L 0 -10 -20 -30 -40 5 5 1 0.5 1 0.5 0.1 0.1 0.05 0.05 0.01 Series 0.01 -55 -40 -25 20 Temperature () 85 105 -55 -40 -25 20 Temperature () 85 105 (QGXUDQFH $SSOLHGULSSOHFXUUHQW DWY&RI6HULHV/$; Series Ratings Case size LAX 200V1000F 30 x 50L 0 10 20 30 Case size 400V330F 35 x 50L 0 10 20 30 Tangent of loss angle 0.5 0.1 0.05 0.1 0.05 0.01 50 50 Leakage current (A) 0.01 10 5 1 Aluminum Electrolytic Capacitors for Audio Tangent of loss angle 0.5 Leakage current (A) Ratings LAX Ripple current : 1.04Arms (120Hz) Capacitance change (%) Capacitance change (%) Ripple current : 2.00Arms (120Hz) Series 10 5 1 0 2000 4000 6000 8000 10000 0 Time (h) 2000 4000 6000 8000 10000 Time (h) Notice : The mesurment values are not guaranteed values, but measurements. NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. 175 CAT.No.2013/2014E (R) MEMO CAT.No.2013/2014E 176 (OHFWULF'RXEOH/D\HU&DSDFLWRUV '<1$&$332:(5&$3 /LVWRI&RQWHQWV 7\SH/LVWDQG6\VWHPDWL]HG&ODVVLILFDWLRQIRU(OHFWULF'RXEOH /D\HU&DSDFLWRUV &DXWLRQVIRU8VLQJ(OHFWULF'RXEOH/D\HU&DSDFLWRUV 7DSLQJ 6SHFLILFDWLRQVIRU(OHFWULF'RXEOH/D\HU&DSDFLWRUVE\6HULHV 7HFKQLFDO1RWHIRU(OHFWULF'RXEOH/D\HU&DSDFLWRUV 3UHVHQWDWLRQRI6HULHVDQG3DUDOOHO&RQQHFWLRQ3DFN 7HFKQLFDOGDWDIRU(OHFWULF'RXEOH/D\HU&DSDFLWRUV 177 CAT.No.2013/2014E (R) ELECTRIC DOUBLE LAYER CAPACITORS : New series : Upgrade Type List for DYNACAP Category Series Category temp. range Max. Min. Max.operating voltage V.DC Capacitance range F Color of sleeve Page Applications Remarks Reflow soldering type DVN 70 -25 5.5 0.047 0.22 Brown 186 Reflow soldering type DVL 85 -40 5.5 0.047 0.22 Brown 187 Standard type DB 70 -25 5.5 0.047 1.5 Indigo 188 Low profile Low ESR type DBN 70 -25 5.5 0.047 1.0 Indigo 188 DBJ 85 -10 5.5 0.047 1.0 Black 189 DBS 85 -25 3.6 0.047 1.0 Black 190 DX 70 -25 5.5 0.047 1.5 Indigo 191 DXN 70 -25 5.5 0.047 1.5 Indigo 192 DXJ 85 -10 5.5 0.047 1.0 Black 193 DXS 85 -25 3.6 0.047 1.0 Black 194 DK 70 -25 6.3 0.047 1.0 Indigo 195 Ideal for backing up of Li -batterybacked equipment such as cameras, VIDEO s and telephone High temperature type DH 85 -25 5.5 0.047 1.0 Indigo 196 Ideal for backing up of controls, electronic rice cooking jars, home bakeries and others. Wide temperature range type DHL 85 -40 5.5 0.047 1.0 Indigo 197 High temperature long life type DHC 85 -25 5.5 0.047 1.0 DC 614 70 -25 2.5 0.2 DCK 614 60 -10 3.3 0.2 DC 621 70 -25 2.5 0.4 DCK 621 60 -10 3.3 0.4 DSK 414 70 -10 3.3 0.07 DS 614 70 -25 2.5 0.2 DSK 614 60 -10 3.3 0.2 DS 621 70 -25 2.5 0.33 DSK 621 60 -10 3.3 0.33 DZ 70 -25 2.5 1.0 200 Low profile High temperature type Low profile Low ESR High temperature Miniaturized Standard type For memory backup Miniaturized Low ESR type Miniaturized High temperature type Miniaturized Low ESR High temperature type High voltage tolerance type Coin type Reflow soldering Coin type Standard type Black 198 silver 199 Ideal for backing up of RTC s, momentary backup of a battery etc. Ideal for backing up of CMOS IC s, microcomputers, RAM s, RTC s and the like used inVIDEO s, tuners, TV sets, telephone sets, DVD and others. Ideal for backing up of CMOS IC s, microcom-puters, RAM s, RTC s and the like used in VIDEO s, tuners, T V sets, telephone sets, DVD,pager units, cameras, personal wireless items and others. Ideal for backing up of CMOS IC s, microcomputers, RAM s, RTC s for smart meter. outdoor equipment, auto motive and industrial. Ideal for backing up of pager, solar watches, solar calculators, solar remote control units, camaras and the like. 200 silver 201 Mountable on board with best suited for mainly memory and time functions as well as memory backup for PDA and DSC. Black 202 203 Ideal for power supplies of LED displays, personal wireless items, backup for power supplies, and the storage battery of solar battery. For power DZH 60 -25 2.5 50 300 Black High power type DZN 70 -25 2.5 / 2.7 0.7 200 Blue 204 205 Ideal for actuator of moters and electromagnetic coil drives. Low temperature type DY 70 -40 2.5 1.0 33 Brown 206 Packed type DZP 70 -25 5.0 0.47 4.7 Black 207 Ideal for power supplies of LED displays, personal wireless items, backup for power supplies, and the storage battery of solar battery. Max.operating voltage V.DC Capacitance range F Color of sleeve Page Applications 2.5 500,600 1200,1500 Black 208 Ideal for power supplies of LED displays, backup for power supplies, the storage battery of solar battery, and actuator of moters and electomagnetic coil drives. Type List for POWERCAP Category For energy Electric Double Layer Capacitors Large capacitance type Large capacitance type CAT.No.2013/2014E Series DP Category temp. range Max. Min. 60 -25 178 Remarks NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use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esign, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. 179 CAT.No.2013/2014E Electric Double Layer Capacitors W\SH! &K (R) ELECTRIC DOUBLE LAYER CAPACITORS 3URGXFW6\PERO6\VWHPIRU(OHFWULF'RXEOH/D\HU&DSDFLWRUV Series code Voltage Symbol Shape Symbol Capacitance Symbol Additional Symbol Refer to the examples on the page describing a particular series. Taping, Lead-forming Leave the boxes blank when no particular designation is made. Capacitance symbol Max.operating voltage (V) Voltage symbol 2.5 2R5 0.047 473 2.7 2R7 0.1 104 3.3 3R3 0.2 204 3.6 3R6 0.22 224 5.5 5R5 0.33 334 6.3 6R3 Capacitance (F) 0.47 474 0.4 404 0.68 684 1 105 1.5 155 3.3 335 4.7 475 10 106 20 206 50 506 100 107 200 207 1200 128 Write down one of the forming symbols for taping and leadforming capacitors. When taping or lead-forming is not necessary, leave the boxes blank. Electric Double Layer Capacitors CAT.No.2013/2014E 180 NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. (R) ELECTRIC DOUBLE LAYER CAPACITORS 5HFRPPHQGHGVROGHULQJPHWKRG VHULHV'6'6.'91'9/ Method Reflow soldering Soldering iron Flow soldering Advisability Reflow soldering conditions. Temperature on the surface of capacitor () Profile Peak temperature (5s Max.) 200 150 Reflow time 120 Preheat : 150 or less, within 120s Time (s) Peak temp. matrix series DVN,DVL 260 Peak temperature on the surface of capacitor () Peak temperature on the surface of capacitor () series DS,DSK 250 240 230 220 210 200 260 250 240 230 220 210 200 0 10 20 30 40 50 60 0 Reflow time (s) -Period of above 200- 10 20 30 40 50 60 Reflow time (s) -Period of above 200- Preheat : 150 or less, within 120s Preheat : 150 or less, within 120s Attention : Carry out soldering work at low temperature and in the shortest time within above conditions. Do NOT reflow solder, when cell voltage is above 0.3V. Please consult with us about reflow soldering conditions other than the above. Electric Double Layer Capacitors NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. 181 CAT.No.2013/2014E TAPING (R) ELECTRIC DOUBLE LAYER CAPACITORS "DYNACAP" 7DSLQJ &DUULHUWDSHGLPHQVLRQV 6HULHV'6'6. SRODULW\/ Pull-out direction 2.00.1 1.750.1 1.5 F A1 to B2 W B1 4.00.1 6. 9 A2 T2 P (Unit : mm) Ourside size 6.8x1.4 to 2.1L 4.8x1.4L (Terminal shaped : HL) W P F A1 240.2 12.0 11.5 4.4 3.4 5.9 6.5 160.2 8.0 7.5 2.4 3.6 5.0 5.1 3.6 2.4 5.1 5.0 4.8x1.4L (Terminal shaped : HR) A2 B1 B2 5HHOGLPHQVLRQV T2 to D 3.2 0.3 6.9 2.45 0.3 4.9 3DFNLQJTXDQWLW\ (Unit : mm) 100 Max. Ourside size w 330 Max. Ourside size W t 6.8x1.4 to 2.1L 26 3 4.8x1.4L 18 3 Quantity 6.8x2.1L 1500PCS. 6.8x1.4L 1500PCS. to 2000PCS. 4.8x1.4L 2000PCS. t &DUULHUWDSHGLPHQVLRQV 6HULHV'91'9/ SRODULW\5 +0.1 0 B0.1 t20.1 A0.2 P0.1 W0.3 1.750.1 2.00.1 F0.1 4.00.1 S0.1 1.5 t10.1 Pull-out directi 0.20.05 1.5/2 1.5/2 (Unit : mm) Ourside size W A B P t2 F t1 S 12.5x10.5L 32 13.4 13.4 24 11 14.2 0.5 28.4 12.5x 8.5L 32 13.4 13.4 24 9.5 14.2 0.5 28.4 3DFNLQJTXDQWLW\ 5HHOGLPHQVLRQV (Unit : mm) 130.5 80 Electric Double Layer Capacitors 2.5 23 330 CAT.No.2013/2014E W Ourside size W t Ourside size Quantity 12.5x10.5L 34 3 12.5x10.5L 250pcs. 12.5x 8.5L 34 3 12.5x 8.5L 300pcs. t 182 NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. (R) ELECTRIC DOUBLE LAYER CAPACITORS 6WDQGDUGSDFNLQJVSHFLILFDWLRQRI&RLQFHOOW\SH Series DC, DX, DB, DH, DCK614, 621 DXJ, DXN, DXS DBN, DBJ, DBS, DK, DHL, DHC13.5 DB, DBN, DBJ, DBS, DK DH, DHL, DHC21.5 Small box DSK414, 614, 621 DVN, DVL Plastic reel Plastic bag * Packing style Inner box Inner box Inner box * DC, DCK : Vacuum packing 6WDQGDUGSDFNLQJVSHFLILFDWLRQRIODUJHW\SH Series DY, DZ, DZN, DZH 6.3 to 18 DZP DY, DZ, DZN, DZH, DP 22 or more Plastic bag Inner box Packing style Inner box Outer box Electric Double Layer Capacitors Please inquire for details. NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. 183 CAT.No.2013/2014E (R) ELECTRIC DOUBLE LAYER CAPACITORS &DXWLRQVIRU8VLQJ(OHFWULF'RXEOH/D\HU&DSDFLWRU '<1$&$332:(5&$3 Electric Double Layer Capacitors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o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series connection will cause imbalance in the voltage, charged to the capacitors and an overvoltage may be charged to one or more them. This may cause a decrease in the capacity, an increase in the internal resistance and causing leakage or damage to the product in some cases. When using series connection for several capacitors, please derate the applied voltage from the operating maximum voltage or use balancing circuits (bleeder resistor, etc.) to compensate for the imbalance in the applied voltage for each capacitor Moreover, please ensure the arrangement does not cause temperature fluctuation between capacitors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esign, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. (R) ELECTRIC DOUBLE LAYER CAPACITORS .HHS WKH SURGXFW LQ D SODFH ZKHUH WKH WHPSHUDWXUHLVDQGWKHKXPLGLW\LVORZHU WKDQ $YRLG DQ DEUXSW WHPSHUDWXUH FKDQJH ZKLFKPD\FDXVHFRQGHQVDWLRQRUGHWHULRUDWLRQRI WKHSURGXFWRUOLTXLGOHDNDJH 'R QRW VWRUH ('/& DW D SODFH ZKHUH WKHUH LV D SRVVLELOLW\WKDWWKH\PD\JHWZDWHUVDOWRURLOVSLOO 'R QRW VWRUH ('/& DW SODFH ZKHUH WKH DLU FRQWDLQV GHQVH KD]DUGRXV JDV K\GURJHQ VXOILGH VXOIXURXVDFLGQLWURXVDFLGFKORULQHDPPRQLDHWF 'R QRW VWRUH ('/& DW D SODFH ZKHUH LW JHWV XOWUDYLROHWUD\RUUDGLRDFWLYHUD\ &DSDFLWRUVILWWHGZLWKDUHOLHIYDOYH 7KHUHOLHIYDOYHLVSURYLGHGZLWKDYDOYHIXQFWLRQ ZLWKSDUWRIWKHFDVHPDGHWKLQWRDYRLGH[SORVLRQ E\LQFUHDVHGLQWHUQDOSUHVVXUHZKHQWKHFDSDFLWRU LV XQGHU DEQRUPDO ORDG VXFK DV RYHUYROWDJH RU UHYHUVHYROWDJH$IWHUDFWLYDWLRQRIWKHUHOLHIYDOYH WKH FDSDFLWRU PXVW EH UHSODFHG DV LW GRHV QRW UHVWRUH )RU WKH FDSDFLWRUV ZLWK D FDVH UHOLHI YDOYH SURYLGHDYRLGRQWKHWRSRIWKHUHOLHIYDOYHVRDV QRWWRKDPSHULWVDFWLYDWLRQ0DNHDYRLGRIPP RUPRUHIRUWKHSURGXFWRIRUOHVVLQGLDPHWHU DQGDYRLGRIPPRUPRUHIRUWKHSURGXFWRI WRPPLQGLDPHWHURQWKHWRS 8VHDWDKLJKDOWLWXGH 7KHXVHRIFDSDFLWRUVDWKLJKDOWLWXGHVVXFKDVRQ DQDLUSODQHFDXVHVDODUJHGLIIHUHQFHEHWZHHQWKH LQWHUQDO SUHVVXUH RI WKH FDSDFLWRUV DQG WKH DWPR VSKHULFSUHVVXUH +RZHYHUWKHUHLVQRSUREOHPLQXVHXQGHUDWPRVSKHULF SUHVVXUHXSWRDERXWDQDOWLWXGHRIPHWHUV ,IWKHFRQGLWLRQLVVHYHUHOLNHVSDFHSOHDVHFRQWDFW XV NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use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o.2013/2014E Electric Double Layer Capacitors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ize : 12.5x8.5mm, compatible with surface mounting and low ESR. Unlike batteries, safe and high reliability without containing active and hazardous substance. Unlike batteries, excellent charge and discharge characteristics with no chemical reactions. Responds to temperature 260 during the reflow peek. Marking color : White print on an brown sleeve Convert to chip DBN DVN Specifications ,WHP Performance Category temperature range () 25 to 70 Tolerance at rated capacitance (%) 20 to 80 Internal resistance at 1 kHz Rated Capacitance (F) 0.047 0.1 0.22 Internal resistance () 30 25 30 25 30 25 Characteristics at high and low temperature Percentage of capacitance change Endurance (70) Percentage of capacitance change Within 30% of the value at 20 Less than five times of the value at 20 Internal resistance 1000 hours Test time Within 30% of the initial measured value Less than four times of the initial specified value Internal resistance Shelf life (70) Test time : 1000 hours ; Same as endurance. Applicable standards Conforms to JIS C5160-1 2009 (IEC 62391-1 2006) Outline Drawing Unit : mm 6.0 4.0 6.0 130.2 D0.5 Unit : mm 3.2 (5.0) (5.0) (5.0) 130.2 0.70.3 0.3 Max Recommended land pattern size L Max (1.2) Part numbering system (example : 5.5V0.1F) DVN 5R5 Series code Rated voltage symbol D 104 Terminal code Rated capacitance symbol T R5 Taping symbol Part number is refer to below table. Standard Ratings Max. operating voltage (V) Rated capacitance (F) 5.5 0.047 DVN-5R5D473T-R5 12.5x8.5 5.5 0.1 DVN-5R5D104T-R5 12.5x8.5 5.5 0.22 DVN-5R5D224T-R5 12.5x8.5 Electric Double Layer Capacitors soldering ELNA Parts No. DxL (mm) conditions are described on page 181. CAT.No.2013/2014E 186 NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. (R) ELECTRIC DOUBLE LAYER CAPACITORS "DYNACAP" 960':LGH7HPSHUDWXUHUDQJH *5((1 &$3 DVL & Size : 12.5x10.5mm, compatible with surface mounting. Wide temperature range (-40 to 85), Low ESR. Unlike batteries, safe and high reliability without containing active and hazardous substance. Unlike batteries, excellent charge and discharge characteristics with no chemical reactions. Responds to temperature 260 during the reflow peek. Convert to chip Marking color : White print on an brown sleeve DHL DVL Specifications ,WHP Performance Category temperature range () 40 to 85 Tolerance at rated capacitance (%) 20 to 80 Internal resistance at 1 kHz Rated Capacitance (F) 0.047 0.1 0.22 Internal resistance () 45 45 45 Characteristics at high and low temperature Percentage of capacitance change Within 30% of the value at 20 -40 : Less than seven times of the value at 20 85 : Less than five times of the value at 20 Internal resistance 1000 hours Test time Within 30% of the initial measured value Percentage of capacitance change Endurance (85) Less than four times of the initial specified value Internal resistance Test time : 1000 hours ; Same as endurance. Shelf life (85) Conforms to JIS C5160-1 2009 (IEC 62391-1 2006) Applicable standards Outline Drawing Unit : mm 6.0 4.0 6.0 130.2 D0.5 Unit : mm 3.2 (5.0) (5.0) (5.0) 130.2 0.70.3 0.3 Max Recommended land pattern size L Max (1.2) Part numbering system (example : 5.5V0.1F) DVL 5R5 Series code Rated voltage symbol D 104 Terminal code Rated capacitance symbol T R5 Taping symbol Part number is refer to below table. Standard Ratings Rated capacitance (F) ELNA Parts No. DxL (mm) 5.5 0.047 DVL-5R5D473T-R5 12.5x10.5 5.5 0.1 DVL-5R5D104T-R5 12.5x10.5 5.5 0.22 DVL-5R5D224T-R5 12.5x10.5 soldering conditions are described on page 181. NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. 187 CAT.No.2013/2014E Electric Double Layer Capacitors Max. operating voltage (V) DB, DBN *5((1 &$3 96WDQGDUG&DSDFLWRUV 6HULHV'% (R) ELECTRIC DOUBLE LAYER CAPACITORS "DYNACAP" Small-sized, large capacity, excellent voltage holding. For all ratings, uniform 5mm pitch of terminal spacing. Wider temperature range-25 to 70 Cthan battery. 21.5x7.5 size can encase up to 1.5F. Ideal for backing up of CMOS s, IC s, microcomputers, RAM s, RTC s and the like used in Video s, tuners, TV sets, telephone sets and others. & DB DBN Marking color : White print on an indigo sleeve Low resistance Specifications Item Performance Category temperature range () 25 to 70 Tolerance at rated capacitance (%) 20 to 80 Internal resistance Rated capacitance (F) 0.047 0.1 0.22 0.33 at 1 kHz Internal resistance () 120 75 75 75 Characteristics at high Percentage of capacitance change and low temperature Internal resistance Endurance (70) Percentage of capacitance change 0.47 1000 hours Within four times of the initial specified value Shelf life (70) Test time : 1000 hours ; Same as endurance. Conforms to JIS C5160-1 2009 (IEC 62391-1 2006) Outline Drawing Standard Ratings Unit : mm Max. operating voltage (V) Rated capacitance (F) Sleeve 1.20.1 0.50.1 6.01 4.00.5 3.00.5 0.047 0.1 0.22 0.33 0.47 0.47 1.0 1.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 0.80.1 5.00.3 30 Within 30% of the initial measured value Applicable standards D Max 1.5 30 Within 30% of the value at 20 Internal resistance 6.01 1.0 Less than five times of the value at 20 Test time L Max 0.47 7513.53021.5 ELNA Parts No. DB-5R5D473T DB-5R5D104T DB-5R5D224T DB-5R5D334T DB-5R5D474ST DB-5R5D474T DB-5R5D105T DB-5R5D155T DxL (mm) 13.5x7.5 13.5x7.5 13.5x7.5 13.5x7.5 13.5x7.5 21.5x8.0 21.5x8.0 21.5x8.0 Part numbering system (example : 5.5V0.1F) Sn plated teminal DB Series code 5R5 D 104 Reted voltage symbol Terminal code Reted capacitance symbol T Additional symbol Part number is refer to above table. 9/RZ5HVLVWDQFH 6HULHV'%1 *5((1 &$3 /RZ (65 & Specifications Internal resistance was reduced to 85% to DB series. It excels in rapid charge.(It can charge and discharge with 1.5 times as much current (mA) as rated capacitance.) Item Performance Category temperature range () 25 to 70 Tolerance at rated capacitance (%) 20 to 80 Internal resistance Rated capacitance (F) 0.047 0.1 0.22 0.33 at 1 kHz Internal resistance () 25 25 25 25 Characteristics at high Percentage of capacitance change and low temperature Internal resistance Endurance (70) Percentage of capacitance change 0.47 0.47 2513.52021.5 1.0 1.5 20 20 Within 30% of the value at 20 Less than five times of the value at 20 Test time 1000 hours Within 30% of the initial measured value Internal resistance Within four times of the initial specified value Electric Double Layer Capacitors Shelf life (70) Test time : 1000 hours ; Same as endurance. Applicable standards Conforms to JIS C5160-1 2009 (IEC 62391-1 2006) Standard Ratings Max. operating voltage (V) Rated capacitance (F) 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 CAT.No.2013/2014E 0.047 0.1 0.22 0.33 0.47 0.47 1.0 1.5 ELNA Parts No. DBN-5R5D473T DBN-5R5D104T DBN-5R5D224T DBN-5R5D334T DBN-5R5D474ST DBN-5R5D474T DBN-5R5D105T DBN-5R5D155T DxL (mm) 13.5x7.5 13.5x7.5 13.5x7.5 13.5x7.5 13.5x7.5 21.5x8.0 21.5x8.0 21.5x8.0 Part numbering system (example : 5.5V0.047F) DBN Series code 5R5 D 473 Reted voltage symbol Terminal code Reted capacitance symbol T Additional symbol Part number is refer to left table. 188 NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. (R) ELECTRIC DOUBLE LAYER CAPACITORS "DYNACAP" 9/RZSURILOHDQGKLJKWHPSHUDWXUH&DSDFLWRUV High temperature type of series DB. Small-sized, large capacity, excellent voltage holding. For all ratings, uniform 5mm pitch of terminal spacing. 13.5x7.5 e size can encase up to 1F. Ideal for backing up of CMOS s, IC s, microcomputers, RAM s, RTC s and the like used in Video s, tuners, TV sets, telephone sets and others. *5((1 &$3 DBJ Y& DH Low profile DBJ Marking color : White print on a black sleeve DB High temperature Specifications ,WHP Performance Category temperature range () 10 to 85 Tolerance at rated capacitance (%) 20 to 80 Internal resistance at 1 kHz Rated Capacitance (F) 0.047 0.1 0.22 0.33 0.47 1.0 Internal resistance () 200 150 150 150 100 75 Characteristics at high and low temperature Percentage of capacitance change Endurance (85) Percentage of capacitance change Within 30% of the value at 20 Internal resistance Within four times of the initial specified value Test time 1000 hours Within 30% of the initial measured value Internal resistance Less than four times of the initial specified value Test time : 1000 hours ; Same as endurance. Shelf life (85) Applicable standards Conforms to JIS C5160-1 2009 (IEC 62391-1 2006) Outline Drawing Unit : mm Part numbering system (example : 5.5V0.1F) Sleeve 0.50.1 5R5 Max.operating voltage symbol D 104 T Rated capacitance symbol D Max 6.01 Part number is refer to below table. 4.00.5 3.00.5 6.01 Series code 0.80.1 5.00.3 L Max DBJ 1.20.1 Sn plated teminal Standard Ratings Max. operating voltage (V) Rated capacitance (F) ELNA Parts No. DxL (mm) 5.5 0.047 DBJ-5R5D473T 13.5x7.5 5.5 0.1 DBJ-5R5D104T 13.5x7.5 5.5 0.22 DBJ-5R5D224T 13.5x7.5 5.5 0.33 DBJ-5R5D334T 13.5x7.5 5.5 0.47 DBJ-5R5D474T 21.5x8.0 5.5 1.0 DBJ-5R5D105T 21.5x8.0 Electric Double Layer Capacitors NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. 189 CAT.No.2013/2014E DBS *5((1 &$3 9/RZ3URILOHDQG/RZ(65+LJKWHPSHUDWXUH (R) ELECTRIC DOUBLE LAYER CAPACITORS "DYNACAP" Long life of 3.6V 2000 hours in small size low ESR. For all ratings, uniform 5mm pitch of terminal spacing. Wider temperature range (-25 to 85) than battery. 13.5x7.5 size can encase up to 0.47F. Ideal for backing up of CMOS s, IC s, microcomputers, RAM s, RTC s and the like used in Video s, tuners, TV sets, telephone sets and others. It excels in rapid charge. Y& Low voltage High temperature DBS DBN Marking color : White print on a black sleeve Specifications ,WHP Performance Category temperature range () 25 to 85 Tolerance at rated capacitance (%) 20 to 80 Internal resistance at 1 kHz Rated Capacitance (F) 0.047 0.1 0.22 0.33 Internal resistance () 25 25 25 25 Characteristics at high and low temperature Percentage of capacitance change Test time 2000 hours (13.5 0.047F : 1000 hours) Endurance (85) Percentage of capacitance change Within 30% of the initial measured value 0.47 0.47 25 13.5 20 21.5 1.0 20 Within 30% of the value at 20 Internal resistance Less than five times of the value at 20 Within four times of the initial specified value Internal resistance Test time : 1000 hours ; Same as endurance. Shelf life (85) Applicable standards Conforms to JIS C5160-1 2009 (IEC 62391-1 2006) Outline Drawing Unit : mm Part numbering system (example : 3.6V0.1F) Sleeve 0.50.1 3R6 D Reted voltage symbol Terminal code 104 T Reted capacitance Additional symbol symbol D Max 6.01 Part number is refer to following table. 4.00.5 3.00.5 6.01 Series code 0.80.1 5.00.3 L Max DBS 1.20.1 Sn plated teminal Standard Ratings Max. operating voltage (V) ELNA Parts No. Rated capacitance (F) DxL (mm) 3.6 0.047 DBS-3R6D473T 13.5x7.5 3.6 0.1 DBS-3R6D104T 13.5x7.5 3.6 0.22 DBS-3R6D224T 13.5x7.5 3.6 0.33 DBS-3R6D334T 13.5x7.5 3.6 0.47 DBS-3R6D474ST 13.5x7.5 3.6 0.47 DBS-3R6D474T 21.5x8.0 3.6 1.0 DBS-3R6D105T 21.5x8.0 Electric Double Layer Capacitors CAT.No.2013/2014E 190 NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. (R) ELECTRIC DOUBLE LAYER CAPACITORS "DYNACAP" *5((1 &$3 90LQLDWXUL]HG6WDQGDUG&DSDFLWRUV Smaller and lighter than Series DB. 5mm tall. Max. thin profile (H-shaped). Miniaturized but can encase up to 0.47F in 11.5x5mm case, and 1.5F in 19.0x20.5mm case. DX Y& 0LQLDWXUL]HG '; '% Marking color : White print on an indigo sleeve Specifications Item Performance Category temperature range () 25 to 70 Tolerance at rated capacitance (%) 20 to 80 Internal resistance at 1 kHz Rated capacitance (F) 0.047 0.1 0.22 0.33 Internal resistance () 120 75 75 75 Characteristics at high and low temperature Percentage of capacitance change Endurance (70) Percentage of capacitance change 0.47 0.47 3019.0 7511.575 1.0 1.5 30 30 Within 30% of the value at 20 Internal resistance Less than five times of the value at 20 Test time 1000 hours Within 30% of the initial measured value Internal resistance Less than four times of the initial specified value Test time : 1000 hours ; Same as endurance. Shelf life (70) Applicable standards Conforms to JIS C5160-1 2009 (IEC 62391-1 2006) Outline Drawing Unit : mm D0.3 Terminal shaped : H (4.5) SnCu plated (11.5 : 0.8, 19 0.15 0.15 5.00.3 4.00.3 Sleeve Sleeve SnCu plated 5R5 Reted voltage symbol Series code 5.00.5 : 1.0) Note U 104 Terminal code (0.8) 10.00.5 Part numbering system (example : 5.5V0.1F) DX D0.3 50.3 L0.5 L0.5 12.40.5 (4.5) Terminal shaped : V Reted capacitance symbol Additional symbol Part number is refer to below table. Do not apply external force to products or terminals as stress such as twisting, bending, pushing, or falling of such products or terminals may remove the terminals, resulting in an open/short circuit or liquid leakage. Avoid applying excessive heat to capacitors during heating of an adhesive curing oven. For details, refer to the precautions in use of DYNACAP. Standard Ratings Max. operating voltage (V) 5.5 5.5 5.5 5.5 Rated capacitance (F) ELNA Parts No. DxL (mm) DX-5R5V473U 11.5x13.0 DX-5R5H473U 11.5x 5.0 0.047 0.1 0.22 0.33 DX-5R5V104U 11.5x13.0 DX-5R5H104U 11.5x 5.0 DX-5R5V224U 11.5x13.0 DX-5R5H224U 11.5x 5.0 11.5x13.0 DX-5R5H334U 11.5x 5.0 DX-5R5V474SU DX-5R5H474SU DX-5R5V474U 11.5x13.0 11.5x 5.0 19.0x20.5 5.5 0.47 5.5 1.0 DX-5R5V105U 19.0x20.5 5.5 1.5 DX-5R5V155U 19.0x20.5 NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. 191 CAT.No.2013/2014E Electric Double Layer Capacitors DX-5R5V334U DXN (R) ELECTRIC DOUBLE LAYER CAPACITORS "DYNACAP" *5((1 &$3 90LQLDWXUL]HG/RZ5HVLVWDQFH Y& Internal resistance was reduced to 85% to DX series and this size. 5mm tall. Max. thin profile (H-shaped). Miniaturized but can encase up to 0.47F in 11.5x5mm case, /RZUHVLVWDQFH and 1.5F in 19.0x20.5mm case. It excels in rapid charge. ';1 '; (It can charge and discharge with 1.5 times as much current (mA) as rated capacitance.) Marking color : White print on an indigo sleeve Specifications Item Performance Category temperature range () -25 to 70 Tolerance at rated capacitance (%) -20 to 80 Internal resistance at 1 kHz Rated capacitance (F) 0.047 0.1 0.22 0.33 Internal resistance () 25 25 25 25 Characteristics at high and low temperature Percentage of capacitance change Endurance (70) Percentage of capacitance change 0.47 0.47 2511.52019.0 1.0 1.5 20 20 Within 30% of the value at 20 Internal resistance Less than five times of the value at 20 Test time 1000 hours Within 30% of the initial measured value Internal resistance Less than four times of the initial specified value Shelf life (70) Test time : 1000 hours ; Same as endurance. Applicable standards Conforms to JIS C5160-1 2009(IEC 62391-1 2006) Outline Drawing Unit : mm D0.3 Terminal shaped : H (4.5) SnCu plated (11.5 : 0.8, 19 : 1.0) 0.15 5R5 Rated voltage symbol Series code Note 104 Terminal shaped Rated Capacitance symbol (0.8) 10.00.5 5.00.5 Part numbering system (example : 5.5V0.1F) DXN 0.15 5.00.3 4.00.3 Sleeve Sleeve SnCu plated D0.3 50.3 L0.5 L0.5 12.40.5 (4.5) Terminal shaped : V U Additional symbol Part number is refer to below table. Do not apply external force to products or terminals as stress such as twisting, bending, pushing, or falling of such products or terminals may remove the terminals, resulting in an open/short circuit or liquid leakage. Avoid applying excessive heat to capacitors during heating of an adhesive curing oven. For details, refer to the precautions in use of DYNACAP. Standard Ratings Max. operating voltage (V) 5.5 5.5 5.5 5.5 Electric Double Layer Capacitors 5.5 Rated capacitance (F) ELNA Parts No. DxL (mm) DXN-5R5V473U 11.5x13.0 DXN-5R5H473U 11.5x 5.0 0.047 0.1 0.22 0.33 0.47 DXN-5R5V104U 11.5x13.0 DXN-5R5H104U 11.5x 5.0 DXN-5R5V224U 11.5x13.0 DXN-5R5H224U 11.5x 5.0 DXN-5R5V334U 11.5x13.0 DXN-5R5H334U 11.5x 5.0 DXN-5R5V474SU DXN-5R5H474SU DXN-5R5V474U 11.5x13.0 11.5x 5.0 19.0x20.5 5.5 1.0 DXN-5R5V105U 19.0x20.5 5.5 1.5 DXN-5R5V155U 19.0x20.5 CAT.No.2013/2014E 192 NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. (R) ELECTRIC DOUBLE LAYER CAPACITORS "DYNACAP" 90LQLDWXUL]HG+LJKWHPSHUDWXUH&DSDFLWRUV ] High temperature type of Series DX. 5mm tall. Max. thin profile (H-shaped). Miniaturized but can encase up to 0.33F in 11.5x5mm case, and 1.0F in 19.0x20.5mm case. *5((1 &$3 DXJ +LJKWHPSHUDWXUH ';- '; Marking color : White print on a black sleeve Specifications Item Performance Category temperature range () 10 to 85 Tolerance at rated capacitance (%) 20 to 80 Internal resistance at 1 kHz Rated capacitance (F) 0.047 0.1 0.22 0.33 1.0 Internal resistance () 200 150 150 150 75 Characteristics at high and low temperature Percentage of capacitance change Endurance (85) Percentage of capacitance change Within 30% of the value at 20 Internal resistance Within four times of the initial specified value 1000 hours Test time Within 30% of the initial measured value Less than four times of the initial specified value Internal resistance Shelf life (85) Test time : 1000 hours ; Same as endurance. Applicable standards Conforms to JIS C5160-1 2009 (IEC 62391-1 2006) 2XWOLQH'UDZLQJ Unit : mm Terminal shaped : H (4.5) D0.3 D0.3 Sleeve 4.00.3 Sleeve SnCu plated (11.5 : 0.8, 19 0.15 5.00.3 SnCu plated 0.15 10.00.5 5R5 Rated voltage symbol Series code 104 Terminal shaped (0.8) 5.00.5 : 1.0) 1RWH Part numbering system (example : 5.5V0.1F) DXJ 50.3 L0.5 L0.5 12.40.5 (4.5) Terminal shaped : V U Rated Capacitance symbol Part number is refer to below table. Do not apply external force to products or terminals as stress such as twisting, bending, pushing, or falling of such products or terminals may remove the terminals, resulting in an open/short circuit or liquid leakage. Avoid applying excessive heat to capacitors during heating of an adhesive curing oven. For details, refer to the precautions in use of DYNACAP. Standard Ratings Max. operating voltage (V) 5.5 5.5 5.5 5.5 0.047 0.1 0.22 0.33 1.0 NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. DxL (mm) DXJ-5R5V473U 11.5x13.0 DXJ-5R5H473U 11.5x 5.0 DXJ-5R5V104U 11.5x13.0 DXJ-5R5H104U 11.5x 5.0 DXJ-5R5V224U 11.5x13.0 DXJ-5R5H224U 11.5x 5.0 DXJ-5R5V334U 11.5x13.0 DXJ-5R5H334U 11.5x 5.0 DXJ-5R5V105U 19.0x20.5 Electric Double Layer Capacitors 5.5 ELNA Parts No. Rated capacitance (F) 193 CAT.No.2013/2014E DXS 3.6V Miniaturized Low ESR High Temperature (R) ELECTRIC DOUBLE LAYER CAPACITORS "DYNACAP" GREEN CAP 85C Long life of 3.6V 2000 hours, low ESR in DX series and this size. 5mm tall. Max. thin profile (H-shaped). Wider temperature range (-25 to 85 C) than battery. Miniaturized but can encase up to 0.47F in 11.5x5mm case Low voltage High and 1.0F in 19.0x20.5mm case. temperature It excels in rapid charge. DXS DXN Marking color : White print on a black sleeve Specifications Item Performance Category temperature range () 25 to 85 Tolerance at rated capacitance (%) 20 to 80 Internal resistance at 1 kHz Rated capacitance (F) 0.047 0.1 0.22 0.33 Internal resistance () 25 25 25 25 Characteristics at high and low temperature Percentage of capacitance change Endurance (85) Percentage of capacitance change 0.47 0.47 1.0 25 (11.5) 20 (19.0) 20 Within 30% of the value at 20 Internal resistance Less than five times of the value at 20 Test time 2000 hours11.5 0.047F : 1000 hours Within 30% of the initial measured value Internal resistance Less than four times of the initial specified value Shelf life (85) Test time : 1000 hours ; Same as endurance. Applicable standards Conforms to JIS C5160-1 2009(IEC 62391-1 2006) Outline Drawing Unit : mm D0.3 Terminal shaped : H (4.5) SnCu plated (11.5 : 0.8, 19 : 1.0) 0.15 3R6 Rated voltage symbol Series code Note 104 Terminal shaped (0.8) 10.00.5 5.00.5 Part numbering system (example : 3.6V0.1F) DXS 0.15 5.00.3 4.00.3 Sleeve Sleeve SnCu plated D0.3 50.3 L0.5 L0.5 12.40.5 (4.5) Terminal shaped : V Rated capacitance symbol Part number is refer to below table. U Additional symbol Do not apply external force to products or terminals as stress such as twisting, bending, pushing, or falling of such products or terminals may remove the terminals, resulting in an open/short circuit or liquid leakage. Avoid applying excessive heat to capacitors during heating of an adhesive curing oven. For details, refer to the precautions in use of DYNACAP. Standard Ratings Max. operating voltage (V) Rated capacitance (F) 5.5 3.6 0.047 5.5 3.6 0.1 3.6 5.5 Electric Double Layer Capacitors 5.5 3.6 0.22 0.33 3.6 5.5 0.47 5.5 3.6 1.0 CAT.No.2013/2014E ELNA Parts No. 194 DxL (mm) DXS-5R5V473U DXS-3R6V473U 11.5x13.0 DXS-5R5H473U DXS-3R6H473U 11.5x 5.0 DXS-5R5V104U DXS-3R6V104U 11.5x13.0 DXS-3R6H104U DXS-5R5H104U 11.5x 5.0 DXS-3R6V224U DXS-5R5V224U 11.5x13.0 DXS-5R5H224U DXS-3R6H224U 11.5x 5.0 DXS-5R5V334U DXS-3R6V334U 11.5x13.0 DXS-3R6H334U DXS-5R5H334U 11.5x 5.0 DXS-3R6V474SU DXS-5R5V474SU DXS-5R5H474SU DXS-3R6H474SU DXS-5R5V474U DXS-3R6V474U DXS-3R6V105U DXS-5R5V105U 11.5x13.0 11.5x 5.0 19.0x20.5 19.0x20.5 NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. (R) ELECTRIC DOUBLE LAYER CAPACITORS "DYNACAP" High Voltage Tolerance Capacitors GREEN CAP DK 70C High voltage tolerant (6.3V guaranteed) and highly reliable. Ideal for backing up of Li-battery-backed equipment such as cameras, video and telephone sets. Miniaturized High voltage tolerant DB DX DK Marking color : White print on an indigo sleeve Specifications Item Performance Category temperature range () 25 to 70 Tolerance at rated capacitance (%) 20 to 80 Internal resistance at 1 kHz Rated capacitance (F) 0.047 0.1 0.47 0.68 1.0 Internal resistance () 300 200 50 50 30 Characteristics at high and low temperature Percentage of capacitance change Endurance (70) Percentage of capacitance change Within 30% of the value at 20 Internal resistance less than five times of the value at 20 Test time 1000 hours Within 30% of the initial measured value Internal resistance Less than four times of the initial specified value Test time : 1000 hours ; Same as endurance. Shelf life (70) Conforms to JIS C5160-1 2009 (IEC 62391-1 2006) Applicable standards Outline Drawing Unit : mm Part numbering system (example : 6.3V0.1F) Sleeve 0.50.1 6R3 Max.operating voltage symbol D 104 T Rated capacitance symbol D Max 6.01 Part number is refer to below table. 4.00.5 3.00.5 6.01 Series code 0.80.1 5.00.3 L Max DK 1.20.1 Sn plated teminal Standard Ratings Max. operating voltage (V) Rated capacitance (F) ELNA Parts No. DxL (mm) 6.3 0.047 DK-6R3D473T 13.5x9.5 6.3 0.1 DK-6R3D104T 13.5x9.5 6.3 0.47 DK-6R3D474T 21.5x9.5 6.3 0.68 DK-6R3D684T 21.5x9.5 6.3 1.0 DK-6R3D105T 21.5x9.5 Electric Double Layer Capacitors NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. 195 CAT.No.2013/2014E DH GREEN CAP High-Temperature Capacitors (R) ELECTRIC DOUBLE LAYER CAPACITORS "DYNACAP" 85C High temperature tolerant (-25 to 85) and highly reliable. Ideal for backing up of controls, electronic rice cooking jars, home bakeries and the like. DH High temperature Miniaturized DB DX Marking color : White print on an indigo sleeve Specifications Item Performance Category temperature range () 25 to 85 Tolerance at rated capacitance (%) 20 to 80 Internal resistance at 1 kHz Rated capacitance (F) 0.047 0.1 0.22 0.47 0.68 1.0 Internal resistance () 300 200 120 50 50 30 Characteristics at high and low temperature Percentage of capacitance change Endurance (85) Percentage of capacitance change Within 30% of the value at 20 Internal resistance less than five times of the value at 20 Test time 1000 hours Within 30% of the initial measured value Internal resistance Less than four times of the initial specified value Shelf life (85) Test time : 1000 hours ; Same as endurance. Applicable standards Conforms to JIS C5160-1 2009 (IEC 62391-1 2006) Outline Drawing Unit : mm Part numbering system (example : 5.5V0.1F) Sleeve 0.50.1 5R5 Max.operating voltage symbol D 104 T Rated capacitance symbol D Max 6.01 Part number is refer to below table. 4.00.5 3.00.5 6.01 Series code 0.80.1 5.00.3 L Max DH 1.20.1 Sn plated teminal Standard Ratings Max. operating voltage (V) Rated capacitance (F) ELNA Parts No. DxL (mm) 5.5 0.047 DH-5R5D473T 13.5x9.5 5.5 0.1 DH-5R5D104T 13.5x9.5 5.5 0.22 DH-5R5D224T 13.5x9.5 5.5 0.47 DH-5R5D474T 21.5x9.5 5.5 0.68 DH-5R5D684T 21.5x9.5 5.5 1.0 DH-5R5D105T 21.5x9.5 Electric Double Layer Capacitors CAT.No.2013/2014E 196 NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. (R) ELECTRIC DOUBLE LAYER CAPACITORS "DYNACAP" 9:LGH7HPSHUDWXUH5DQJH&DSDFLWRUV *5((1 &$3 DHL Y& It is a category temperature range larger than battery. 13.5 size can encase up to 0.22F, 21.5 size can encase up to 1.0F. It excels in rapid charge. Ideal for backing up of CMOS IC s, microcomputers, RAM s, RTC s for smart meter, outdoor equipment, auto motive and industrial. :LGHWHPSHUDWXUHUDQJH '+ '+/ Marking color : White print on an indigo sleeve Specifications Item Performance Category temperature range () 40 to 85 Tolerance at rated capacitance (%) 20 to 80 Internal resistance at 1 kHz Rated capacitance (F) 0.047 0.1 0.22 0.47 0.68 1.0 Internal resistance () 40 40 40 20 20 20 Percentage of capacitance change Characteristics at high and low temperature Within 30% of the value at 20 40 : Less than seven times of the value at 20 85 : Less than five times of the value at 20 Internal resistance Test time Endurance (85) 1000 hours Percentage of capacitance change Within 30% of the initial measured value Internal resistance Less than four times of the initial specified value Shelf life (85) Test time : 1000 hours ; Same as endurance. Applicable standards Conforms to JIS C5160-1 2009 (IEC 62391-1 2006) Outline Drawing Unit : mm Part numbering system (example : 6.3V0.1F) Sleeve 0.50.1 5R5 D 104 Rated voltage symbol Terminal code Rated capacitance symbol T D Max 6.01 4.00.5 3.00.5 6.01 Series code Part number is refer to below table. 5.00.3 L Max DHL 1.20.1 0.80.1 Sn plated teminal Standard Ratings Max. operating voltage (V) Rated capacitance (F) ELNA Parts No. DxL (mm) 5.5 0.047 DHL-5R5D473T 13.5x9.5 5.5 0.1 DHL-5R5D104T 13.5x9.5 5.5 0.22 DHL-5R5D224T 13.5x9.5 5.5 0.47 DHL-5R5D474T 21.5x9.5 5.5 0.68 DHL-5R5D684T 21.5x9.5 5.5 1.0 DHL-5R5D105T 21.5x9.5 Electric Double Layer Capacitors NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. 197 CAT.No.2013/2014E DHC 9+LJK7HPSHUDWXUH/RQJ/LIH&DSDFLWRUV (R) ELECTRIC DOUBLE LAYER CAPACITORS "DYNACAP" *5((1 &$3 Y& Guarantees 3000 hours at 85, 5.5V (10 years at room temperature). It is a category temperature range larger than battery. It excels in rapid charge. Ideal for backing up of CMOS IC s, microcomputers, RAM s, RTC s for smart meter, outdoor equipment, auto motive and industrial. /RQJ/LIH '+ '+& Marking color : White print on a Black sleeve Specifications Item Performance Category temperature range () 25 to 85 Tolerance at rated capacitance (%) 20 to 80 Internal resistance at 1 kHz Rated capacitance (F) 0.047 0.1 0.22 0.47 0.68 1.0 Internal resistance () 300 200 120 50 50 30 Characteristics at high and low temperature Percentage of capacitance change Endurance (85) Percentage of capacitance change Within 30% of the value at 20 Internal resistance less than five times of the value at 20 Test time 3000 hours Within 30% of the initial measured value Internal resistance Less than four times of the initial specified value Shelf life (85) Test time : 1000 hours ; Same as endurance. Applicable standards Conforms to JIS C5160-1 2009 (IEC 62391-1 2006) Outline Drawing Unit : mm Part numbering system (example : 5.5V0.1F) Sleeve 0.50.1 5R5 D 104 Rated voltage symbol Terminal code Rated capacitance symbol T D Max 6.01 Part number is refer to below table. 4.00.5 3.00.5 6.01 Series code 0.80.1 5.00.3 L Max DHC 1.20.1 Sn plated teminal Standard Ratings Max. operating voltage (V) Rated capacitance (F) 5.5 0.047 ELNA Parts No. DHC-5R5D473T DxL (mm) 13.5x9.5 5.5 0.1 DHC-5R5D104T 13.5x9.5 5.5 0.22 DHC-5R5D224T 13.5x9.5 5.5 0.47 DHC-5R5D474T 21.5x9.5 5.5 0.68 DHC-5R5D684T 21.5x9.5 5.5 1.0 DHC-5R5D105T 21.5x9.5 Electric Double Layer Capacitors CAT.No.2013/2014E 198 NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. (R) *5((1 &$3 &RLQ&HOO&DSDFLWRUV DC,DCK-614,621 ELECTRIC DOUBLE LAYERCAPACITORS CAPACITORS "DYNACAP" Unlike batteries, the number of charging / discharging cycles unlimited and rapid charging / discharging is possible. High reliability, Safe and unlike secondary batteries, this is pollution free devices. 1.8mm height 614type made lineup in the DC, DCK Series. DC DC 614 621 For higher voltage tolerant Low profile DCK DCK 614 621 Specifications Low profile Item Performance Series Name Series DC Max. operating voltage (V) 2.5 3.3 Category temperature range () 25 to 70 10 to 60 Tolerance at rated capacitance (%) 20 to 80 20 to 80 Internal resistance () at 1 kHz Characteristics at high and low temperature Series DCK Size code 614 621 Size code 614 Rated capacitance (F) 0.2 0.4 Rated capacitance (F) 0.2 0.4 Internal resistance () 100 100 Internal resistance () 200 200 Size code 614 621 Size code 614 621 621 Rated capacitance (F) Within 30% of the value at 20 Within 30% of the value at 20 Rated capacitance (F) Within 50% of the value at 20 Within 50% of the value at 20 Internal resistance () Less than five times of the value at 20 Less than five times of the value at 20 Internal resistance () Less than five times the initial specified value Less than ten times of the value at 20 Endurance 614 621 Size code Test time and temp 70 1000 hours 70 500 hours Rated capacitance (F) Within 30% of the initial measured value of the initial measured value Internal resistance () 400 Max. 1k Max. Size code 614 621 Test time and temp 60 1000 hours 60 500 hours Rated capacitance (F) Within 30% of the initial measured value Within 40% of the initial measured value Internal resistance () 2k Max. 800 Max. Shelf life Same as endurance. Same as endurance. Conforms to JIS C5160-1 2009 (IEC 62391-1 2006) Applicable standards Outline Drawing Unit : mm Terminal shaped : E 1.8MAX(614) 2.6MAX(621) D0.2 L0.1 0.2 Sn plated 1.70.3 2.50.3 0.5 0.150.05 0.50.1 2.00.3 Part numbering system (example : 614,2.5V0.2F, terminal shaped : E) DC Series code 2R5 Max. operating voltage symbol E T 614 E 204 Rated capacitance symbol Part numbering system (example : 621, 3.3V0.4F, terminal shaped : E) DCK Additional symbol Series code Part number is refer to below table. 3R3 E Max. operating voltage symbol 404 T E Rated capacitance Additional symbol symbol Part number is refer to below table. Standard Ratings Rated capacitance (F) ELNA Parts No. DxL (mm) 2.5 0.2 DC-2R5E204T614-E 6.8x1.4 3.3 0.2 DCK-3R3E204T614-E 6.8x1.4 2.5 0.4 DC-2R5E404T-E 6.8x2.1 3.3 0.4 DCK-3R3E404T-E 6.8x2.1 NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. 199 CAT.No.2013/2014E Electric Double Layer Capacitors Max. operating voltage (V) DSK-414 &RLQ&HOO&DSDFLWRUV ELECTRIC DOUBLE LAYER CAPACITORS "DYNACAP" *5((1 &$3 (R) Reflow soldering method available. Unlike batteries, the number of charging / DSK discharging cycles unlimited and rapid 414 charging / discharging is possible. Low profile Unlike batteries, exceilent charge and discharge characteristics with no chemical reactions. 4.8x1.71mm Max height type made lineup in the DSK series. DSK 614 Specifications Item Performance Series Name DSK series Max. operating voltage (V) 3.3 Category temperature range () 10 to 70 Tolerance at rated capacitance (%) 20 to 80 Rated Capacitance (F) 0.07 Internal resistance () at 1 kHz 100 Percentage of capacitance change Characteristics at high and low temperature Within 50% of the value at 20 Internal resistance Within ten times the initial specified value Test temperature 70 Test time Endurance 500 hours Percentage of capacitance change Within 30% of the initial measured value 5k or less Internal resistance Shelf life Test time : 500 hours ; Same as endurance. Applicable standards Conforms to JIS C5160-1 2009IEC 62391-1 2006) Outline Drawing Unit : mm Terminal shaped : HL 3.500.5 0.10.03 2.0 0 0.1 1.660.05 Polarity changesto terminal form. Sn plated Sn plated 1.50.1 4.60.1 1.50.1 7.4 Max. 1.60.2 1.10.5 0.1 L 0.2 1.10.5 7.4 Max. 1.10.5 1.10.5 1.60.2 1.00.2 0.70.2 0.10.03 2.80.1 2.500.5 0.10.03 1.00.2 0.70.2 L 0.1 0.2 D 0 0.2 3.0 0, 0.1 1.660.05 0.10.03 Please Unit : mm Terminal shaped : HR D0 0.2 2.00 0.1 3.0 0, 0.1 Recommended land pattern size consult with us about other terminal form Part numbering system (3.3V0.07F, terminal shaped : HL) DSK Series code 3R3 Max.operating voltage symbol H T414 703 Rated capacitance symbol Additional symbol HL L Terminal shaped Taping Standard Ratings Max. operating voltage (V) 3.3 Reflow Rated capacitance (F) 0.07 ELNA Parts No. DSK-3R3H703T414-HLL DSK-3R3H703T414-HRL DxL (mm) 4.8x1.4 soldering condition : 181 page. Electric Double Layer Capacitors CAT.No.2013/2014E 200 NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. *5((1 Y& &$3 Y& &RLQ&HOO&DSDFLWRUV DS,DSK-614,621 ELECTRIC DOUBLE LAYER CAPACITORS "DYNACAP" (R) Reflow soldering method available. Unlike batteries, the number of charging/ discharging cycles unlimited and rapid charging/ discharging is possible. Unlike batteries, excellent charge and discharge characteristics with no chemical reactions. 1.8mm height type 614 made lineup in the DS, DSK series. DS DS 621 614 For higher voltage tolerant Low profile DSK DSK 621 614 Low profile Specifications Item Performance Series Name Series DS Max.operating voltage (V) 2.5 3.3 Category temperature range () 25 to 70 10 to 60 Tolerance at rated capacitance (%) 20 to 80 20 to 80 Internal resistance () at 1 kHz Characteristics at high and low temperature Endurance Series DSK Size code 614 621 Size code 614 621 Rated capacitance (F) 0.2 0.33 Rated capacitance (F) 0.2 0.33 Internal resistance () 100 100 Internal resistance () 200 200 Size code 614 621 Size code 614 621 Rated capacitance (F) Within 30% of the value at 20 Within 30% of the value at 20 Rated capacitance (F) Within 50% of the value at 20 Within 50% of the value at 20 Internal resistance () Less than five times of the value at 20 Less than five times of the value at 20 Internal resistance () Less than five times the initial specified value Less than five times of the value at 20 Size code Test time and temp. Rated capacitance (F) Internal resistance () Size code Test time and temp. Rated capacitance (F) Internal resistance () 614 60 1000 hours 621 60 500 hours 614 70 1000 hours 621 70 500 hours Within 30% of the initial measured value Within 30% of the initial measured value 400 Max. 1k Max. Same as endurance. Shelf life Within 30% of the initial measured value Within 30% of the initial measured value 800 Max. 2k Max. Same as endurance. Applicable standards Conforms to JIS C5160-1 2009(IEC 62391-1 2006) Outline Drawing Unit : mm Teriminal shaped :H2 614) Recommended land pattern size Unit : mm Terminal shaped :H621) 0 2.00.1 0.80.2 0.150.05 3.00.2 8.30.1 1.70.1 2.50.5 1.40.3 1.30.3 0.90.2 1.00.2 L Sn planted 0.150.05 11.7Max. 2.250.3 0.1 -0.2 2.80.2 4.00.2 0.150.05 2.00.3 1.8 Max. 2.50.3 4.00.5 1.20.2 5-0.5 D0.2 0 4-0.5 0.150.05 3.00.2 Please consult with us about other terminal form. Part numbering system ( 2.5V0.2F, terminal shaped:H2 ) DS Series code 2R5 Max.operating voltage symbol H 204 T614 Rated capacitance symbol Additional symbol H2 Terminal shaped L Part numbering system (example:621, 3.3V0.33F, terminal shaped:H) DSK Taping Part number is refer to below table. Series code 3R3 Max.operating voltage symbol H 334 T ated capacitance symbol Additional symbol H L Terminal shaped Taping Part number is refer to below table. Standard Ratings Rated capacitance (F) ELNA Parts No. DxL (mm) 2.5 0.20 DS-2R5H204T614-H2L 6.8x1.4 3.3 0.20 DSK-3R3H204T614-H2L 6.8x1.4 2.5 0.33 DS-2R5H334T-HL 6.8x2.1 3.3 0.33 DSK-3R3H334T-HL 6.8x2.1 Reflow soldering condition : 181 page. NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. 201 CAT.No.2013/2014E Electric Double Layer Capacitors Max. operating voltage (V) DZ,DZH 6WDQGDUG/DUJHFDSDFLWDQFHW\SH&DSDFLWRUV (R) ELECTRIC DOUBLE LAYER CAPACITORS "DYNACAP" Pollution-Free ; with no pollutants such as Cd or Pb. Unlike batteries ; excellent charge and discharge characteristics with no chemical reactions Y& *5((1 &$3 9 Y& 9 /DUJHFDSDFLWDQFH '=+ '= Specifications Marking color : White print on a black sleeve Item Performance Series name Series DZ Series DZH Category temperature range () 25 to 70 25 to 60 Tolerance at rated capacitance (%) 20 to 80 20 to 80 Internal resistance at 1kHz Refer to the following page Characteristics at high and low temperature Endurance Percentage of capacitance change Within 30% of the value at 20 Percentage of capacitance change Within 30% of value at 20 Internal resistance Less than five times of the value at 20 Internal resistance Less than eight times of the value at 20 Test temperature 70 Test temperature 60 Test time 1000 hours Test time 2000 hours Percentage of capacitance change Within 30% of the initial measured value Percentage of capacitance change Within 30% of the initial measured value Internal resistance Less than four times of the initial specified value Internal resistance Less than four times of the initial specified value Shelf life Same as endurance Same as endurance Applicable standards Conforms to JIS C5160-1 2009 (IEC 62391-1 2006) Outline Drawing Unit : mm d0.05 copper clad steel wire (tinned) Sleeve 22 Sleeve D1max. F0.5 1 D0.5max. 0. 6.3 2.5 5 min. 15min. 8 10 12.5 3.5 5.0 0.6 2.0 1.50.1 Markings L2max. D F d 10 10 L max. Lug terminal details 0.90.1 Thickness : 0.8t 16 1 Vent 18 7.5 0.8 2.6 9HQW 25, 35 6.8 7.5 6.3 to 18 () Negative terminal indicated by cross notching Position of printed circuit board holes 2.1 Part numbering system (example : 2.5V10F) DZ Series code 2R5 D 106 (H8) Rated voltage symbol Terminal code Rated capacitance symbol Casing symbol T Part number is refer to the following page. Electric Double Layer Capacitors CAT.No.2013/2014E 202 NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. (R) ELECTRIC DOUBLE LAYER CAPACITORS "DYNACAP" DZ,DZH Standard Ratings (Series DZ 2.5V) Max. operating voltage (V) Rated capacitance (F) Max. Leakage Current (mA) after 24h ELNA Parts No. DxL (mm) Internal resistance ( max.) at 1kHz Internal resistance (m) at 1kHz (measurement value) 2.5 0.9 0.1 DZ-2R5D904F4T 6.3x14.0 1.0 2.5 1.0 0.1 DZ-2R5D105G3T 8.0x12.0 1.0 400 200 2.5 1.0 0.1 DZ-2R5D105G4T 8.0x15.0 1.0 200 2.5 1.0 0.1 DZ-2R5D105T 8.0x22.0 1.0 150 2.5 2.7 0.2 DZ-2R5D275G5T 8.0x22.0 0.5 150 2.5 3.3 0.2 DZ-2R5D335H5T 10.0x20.0 0.3 70 2.5 3.3 0.2 DZ-2R5D335T 12.5x23.0 0.3 70 2.5 4.7 0.3 DZ-2R5D475H5T 10.0x20.0 0.2 80 40 2.5 4.7 0.3 DZ-2R5D475T 12.5x31.5 0.2 2.5 6.8 0.4 DZ-2R5D685H7T 10.0x30.0 0.2 50 0.5 DZ-2R5D106H8T 10.0x35.0 0.2 40 2.5 10 2.5 10 0.5 DZ-2R5D106Z7T 12.5x31.5 0.2 40 2.5 10 0.5 DZ-2R5D106T 18.0x35.0 0.2 30 35 2.5 15 0.7 DZ-2R5D156J5T 16.0x20.0 0.2 2.5 20 0.8 DZ-2R5D206K8T 18.0x35.0 0.2 30 2.5 20 0.8 DZ-2R5D206T 18.0x40.0 0.2 30 2.5 22 0.8 DZ-2R5D226J6T 16.0x25.0 0.2 30 2.5 30 0.8 DZ-2R5D306K9T 18.0x40.0 0.2 30 2.5 33 0.8 DZ-2R5D336J8T 16.0x35.5 0.2 30 2.5 50 1.0 DZ-2R5D506T 25.0x40.0 0.08 20 2.5 100 1.0 DZ-2R5D107S37T 25.0x50.0 0.08 15 2.5 100 1.0 DZ-2R5D107T 35.0x50.0 0.08 15 2.5 200 2.0 DZ-2R5D207S57T 35.0x50.0 0.08 15 We tailor packaged product in series and parallel arrangements according to voltage and capacitance as required. Standard Ratings (Series DZ 2.7V) Max. operating voltage (V) Rated capacitance (F) Max. Leakage Current (mA) after 24h ELNA Parts No. DxL (mm) Internal resistance ( max.) at 1kHz Internal resistance (m) at 1kHz (measurement value) 2.7 0.9 0.2 DZ-2R7D904F4T 6.3x14.0 1.0 2.7 1.0 0.2 DZ-2R7D105G3T 8.0x12.0 1.0 400 200 2.7 1.0 0.2 DZ-2R7D105G4T 8.0x15.0 1.0 200 2.7 1.0 0.2 DZ-2R7D105G5T 8.0x22.0 1.0 150 2.7 2.7 0.3 DZ-2R7D275G5T 8.0x22.0 0.5 150 2.7 3.3 0.3 DZ-2R7D335H5T 10.0x20.0 0.3 100 2.7 3.3 0.3 DZ-2R7D335Z6T 12.5x23.0 0.3 70 2.7 4.7 0.4 DZ-2R7D475H5T 10.0x20.0 0.2 80 2.7 4.7 0.4 DZ-2R7D475Z7T 12.5x31.5 0.2 40 2.7 6.8 0.5 DZ-2R7D685H7T 10.0x30.0 0.2 50 2.7 10 0.6 DZ-2R7D106H8T 10.0x35.0 0.2 40 2.7 10 0.6 DZ-2R7D106Z7T 12.5x31.5 0.2 40 2.7 10 0.6 DZ-2R7D106K8T 18.0x35.0 0.2 30 2.7 15 0.8 DZ-2R7D156J6T 16.0x25.0 0.2 35 2.7 20 1.0 DZ-2R7D206K8T 18.0x35.0 0.2 30 2.7 20 1.0 DZ-2R7D206K9T 18.0x40.0 0.2 30 2.7 22 1.0 DZ-2R7D226J7T 16.0x31.5 0.2 30 2.7 30 1.0 DZ-2R7D306K9T 18.0x40.0 0.2 30 2.7 33 1.0 DZ-2R7D336J9T 16.0x40.0 0.2 30 We tailor packaged product in series and parallel arrangements according to voltage and capacitance as required. Standard Ratings (Series DZH 2.5V) Max. operating voltage (V) Rated capacitance (F) Max. Leakage Current (mA) after 24h Internal resistance ( max.) at 1kHz Internal resistance (m) at 1kHz (measurement value) ELNA Parts No. DxL (mm) 2.5 50 1.0 DZH-2R5D506K9T 18.0x40.0 0.08 30 2.5 100 2.0 DZH-2R5D107S35T 25.0x40.0 0.08 20 2.5 300 5.0 DZH-2R5D307S57T 35.0x50.0 0.08 15 We tailor packaged product in series and parallel arrangements according to voltage and capacitance as required. Electric Double Layer Capacitors NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. 203 CAT.No.2013/2014E DZN *5((1 &$3 +LJKSRZHUW\SH&DSDFLWRUV (R) ELECTRIC DOUBLE LAYER CAPACITORS "DYNACAP" 9 Y& /RZ(65 9 Low internal resistance allows boosting charge and heavy-current discharge. (ampere level) Pollution-Free ; with no pollutants such as Cd or Pb. +LJKSRZHU Unlike batteries, excellent charge and discharge characteristics with no chemical '=1 '= reaction Marking color : White print on a blue sleeve Specifications Item Performance Category temperature range () 25 to 70 Tolerance at rated capacitance (%) 20 to 80 Internal resistance at 1 kHz Refer to the following page Characteristics at high and low temperature Percentage of capacitance change Endurance (70) Percentage of capacitance change Within 30% of the value at 20 Internal resistance Less than five times of the value at 20 1000 hours Test time Within 30% of the initial measured value Internal resistance Less than four times of the initial specified value Shelf life (70) Test time : 1000 hours ; Same as endurance. Applicable standards Conforms to JIS C5160-1 2009 (IEC 62391-1 2006) Outline Drawing Unit : mm 6.3 to 18 9HQW d0.05 copper clad steel wire (tinned) Sleeve 25, 35 22 Sleeve D0.5max. 5 min. 15min. L2max. D F d 6.3 2.5 8 10 12.5 3.5 5.0 0.6 2.0 16 6.31 Vent 18 7.5 0.8 2.6 6.8 1.50.1 Markings () Negative terminal indicated by cross notching Position of printed circuit board holes 7.5 D1max. F0.5 Lmax. 1 0. 10 10 Lug terminal details 0.90.1 Thickness : 0.8t 2.1 Part numbering system (example : 2.5V10F) DZN Series code 2R5 D 106 (H8) Rated voltage symbol Terminal code Rated capacitance symbol Casing symbol T Part number is refer to the following page. Electric Double Layer Capacitors CAT.No.2013/2014E 204 NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. (R) ELECTRIC DOUBLE LAYER CAPACITORS "DYNACAP" DZN Standard Ratings (Series DZ 2.5V) Max. operating voltage (V) Rated capacitance (F) Max. Leakage Current (mA) after 24h ELNA Parts No. DxL (mm) Internal resistance ( max.) at 1kHz Internal resistance (m) at 1kHz (measurement value) 2.5 0.7 0.1 DZN-2R5D704G4T 8.0x15.0 0.4 200 2.5 0.9 0.1 DZN-2R5D904F4T 6.3x14.0 0.4 300 2.5 1.0 0.1 DZN-2R5D105G3T 8.0x12.0 0.3 150 2.5 1.0 0.1 DZN-2R5D105G4T 8.0x15.0 0.3 150 2.5 1.0 0.1 DZN-2R5D105T 8.0x22.0 0.3 120 2.5 2.7 0.2 DZN-2R5D275G5T 8.0x22.0 0.3 120 2.5 3.3 0.2 DZN-2R5D335H5T 10.0x20.0 0.2 60 2.5 3.3 0.2 DZN-2R5D335T 12.5x23.0 0.2 60 2.5 4.7 0.3 DZN-2R5D475H5T 10.0x20.0 0.1 70 2.5 4.7 0.3 DZN-2R5D475T 12.5x31.5 0.1 35 6.8 0.4 DZN-2R5D685H7T 10.0x30.0 0.1 40 0.5 DZN-2R5D106H8T 10.0x35.0 0.1 35 30 2.5 2.5 10 2.5 10 0.5 DZN-2R5D106Z8T 12.5x36.5 0.1 2.5 10 0.5 DZN-2R5D106T 18.0x35.0 0.1 25 2.5 15 0.7 DZN-2R5D156J5T 16.0x20.0 0.1 30 2.5 20 0.8 DZN-2R5D206K8T 18.0x35.0 0.1 25 2.5 20 0.8 DZN-2R5D206T 18.0x40.0 0.1 20 2.5 22 0.8 DZN-2R5D226J6T 16.0x25.0 0.1 25 2.5 30 0.8 DZN-2R5D306K9T 18.0x40.0 0.1 25 2.5 33 0.8 DZN-2R5D336J8T 16.0x35.5 0.1 25 2.5 50 1.0 DZN-2R5D506T 25.0x40.0 0.03 15 2.5 100 1.0 DZN-2R5D107S37T 25.0x50.0 0.03 15 2.5 100 1.0 DZN-2R5D107T 35.0x50.0 0.03 8 2.5 200 2.0 DZN-2R5D207S57T 35.0x50.0 0.03 8 We tailor packaged product in series and parallel arrangements according to voltage and capacitance as required. Standard Ratings (Series DZ 2.7V) Max. operating voltage (V) Rated capacitance (F) Max. Leakage Current (mA) after 24h Internal resistance ( max.) at 1kHz Internal resistance (m) at 1kHz (measurement value) ELNA Parts No. DxL (mm) 2.7 0.7 0.2 DZN-2R7D704G4T 8.0x15.0 0.4 200 2.7 0.9 0.2 DZN-2R7D904F4T 6.3x14.0 0.4 300 2.7 1.0 0.2 DZN-2R7D105G3T 8.0x12.0 0.3 150 2.7 1.0 0.2 DZN-2R7D105G4T 8.0x15.0 0.3 150 2.7 1.0 0.2 DZN-2R7D105G5T 8.0x22.0 0.3 120 2.7 2.7 0.3 DZN-2R7D275G5T 8.0x22.0 0.3 120 2.7 3.3 0.3 DZN-2R7D335H5T 10.0x20.0 0.2 90 2.7 3.3 0.3 DZN-2R7D335Z6T 12.5x23.0 0.2 60 2.7 4.7 0.4 DZN-2R7D475H5T 10.0x20.0 0.1 70 2.7 4.7 0.4 DZN-2R7D475Z7T 12.5x31.5 0.1 35 6.8 0.5 DZN-2R7D685H7T 10.0x30.0 0.1 40 0.6 DZN-2R7D106H8T 10.0x35.0 0.1 35 30 2.7 2.7 10 2.7 10 0.6 DZN-2R7D106Z8T 12.5x36.5 0.1 2.7 10 0.6 DZN-2R7D106K8T 18.0x35.0 0.1 25 2.7 15 0.8 DZN-2R7D156J6T 16.0x25.0 0.1 40 2.7 20 1.0 DZN-2R7D206K8T 18.0x35.0 0.1 25 2.7 20 1.0 DZN-2R7D206K9T 18.0x40.0 0.1 25 2.7 22 1.0 DZN-2R7D226J7T 16.0x31.5 0.1 25 2.7 30 1.0 DZN-2R7D306K9T 18.0x40.0 0.1 25 2.7 33 1.0 DZN-2R7D336J9T 16.0x40.0 0.1 25 We tailor packaged product in series and parallel arrangements according to voltage and capacitance as required. Electric Double Layer Capacitors NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. 205 CAT.No.2013/2014E DY )RU/RZ7HPSHUDWXUH7\SH&DSDFLWRUV (R) ELECTRIC DOUBLE LAYER CAPACITORS "DYNACAP" *5((1 &$3 For Low Temperature (40YC). Pollution-Free ; with no pollutants such as Cd or Pb. Unlike batteries, excellent charge and discharge characteristics with no chemical reaction. Y& 9 )RU Y& )RU/RZ7HPSHUDWXUH '< '= Marking color : White print on a brown sleeve Specifications Item Performance Category temperature range () 40 to 70 Tolerance at rated capacitance (%) 20 to 80 Internal resistance at 1 kHz Refer to the Standard Ratings Percentage of capacitance change Characteristics at high and low temperature Internal resistance 20 to 70 Within 30% of the value at 20 40 to 25 Within 50% of the value at 20 20 to 70 Less than five times of the value at 20 40 to 25 Less than ten times of the value at 20 Test time Endurance (70) 1000 hours Percentage of capacitance change Within 30% of initial value Internal resistance Less than four times of the initial specified value Shelf life (70) Test time : 1000 hours ; Same as endurance. Applicable standards Conforms to JIS C5160-1 2009 (IEC 62391-1 2006) Outline Drawing Unit : mm 8 to 18 9HQW d0.05 copper clad steel wire (tinned) F0.5 D0.5max. Sleeve Lmax. 15min. D F d 5 min. 8 3.5 10 5.0 16 18 7.5 0.8 0.6 2.0 Part numbering system (example : 2.5V10F) DY Series code 2R5 D 106 H8 Rated voltage symbol Terminal code Rated capacitance symbol Casing symbol T Part number is refer to the following table. Standard Ratings DxL (mm) Internal resistance ( max.) at 1kHz 2.5 1.0 0.1 DY-2R5D105G3T 8.0x12.0 1.0 200 2.5 1.0 0.1 DY-2R5D105G4T 8.0x15.0 1.0 200 2.5 2.7 0.2 DY-2R5D275G5T 8.0x22.0 0.5 120 2.5 3.3 0.2 DY-2R5D335H5T 10.0x20.0 0.3 60 2.5 4.7 0.3 DY-2R5D475H5T 10.0x20.0 0.2 70 2.5 6.8 0.4 DY-2R5D685H7T 10.0x30.0 0.2 40 Max. operating voltage (V) Rated capacitance (F) Max. Leakage Current (mA) after 24h ELNA Parts No. Internal resistance (m) at 1kHz (measurement value) Electric Double Layer Capacitors 2.5 10 0.5 DY-2R5D106H8T 10.0x35.0 0.2 35 2.5 15 0.7 DY-2R5D156J5T 16.0x20.0 0.2 30 2.5 20 0.8 DY-2R5D206K8T 18.0x35.0 0.2 25 2.5 22 0.8 DY-2R5D226J6T 16.0x25.0 0.2 25 2.5 30 0.8 DY-2R5D306K9T 18.0x40.0 0.2 25 2.5 33 0.8 DY-2R5D336J8T 16.0x35.5 0.2 25 CAT.No.2013/2014E 206 NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. (R) ELECTRIC DOUBLE LAYER CAPACITORS "DYNACAP" 3DFNHG7\SH *5((1 &$3 Y& DZP 9 High-voltage capacitor which connected DZ in series. Pollution-Free ; with no pollutants such as Cd or Pb. Unlike batteries, excellent charge and discharge characteristics with no chemical reaction. +LJKYROWDJH '=3 '= Marking color : White print on a brown sleeve Specifications Item Performance Category temperature range () 25 to 70 Tolerance at rated capacitance (%) 20 to 80 Internal resistance at 1 kHz Refer to the Standard Ratings Characteristics at high and low temperature Percentage of capacitance change Endurance (70) Percentage of capacitance change Within 30% of the value at 20 Internal resistance Less than five times of the value at 20 1000 hours Test time Within 30% of initial value Internal resistance Less than four times of the initial specified value Shelf life (70) Same as endurance. Applicable standards Conforms to JIS C5160-1 2009 (IEC 62391-1 2006) Outline Drawing Unit : mm W0.5max. L max. d0.05 copper clad steel wire (tinned) W0.5max. Sleeve T0.5max. 5 min. 10min. T0.5max. L max. F0.5 F0.5 Part numbering system (example : 5.0V0.47F) DZP Series code 5 V Rated voltage symbol 474 G3 Terminal Rated capacitance code symbol Casing symbol TS1 Additional code Part number is refer to the following table. Standard Ratings Max. operating voltage (V) Rated capacitance (F) Max. Leakage Current (mA) after 24h 0.47 0.2 5.0 1.0 0.3 5.0 1.5 0.4 5.0 3.3 0.8 5.0 4.7 1.0 DZP-5V474G3TS1A DZP-5V474G3TS1B DZP-5V105G5STS1A DZP-5V105G5STS1B DZP-5V155G5STS1A DZP-5V155G5STS1B DZP-5V335H7TS1A DZP-5V335H7TS1B DZP-5V475H8TS1A DZP-5V475H8TS1B NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. 207 TxWxL (mm) d 8.5x17.0x16.0 0.6 8.5x17.0x24.0 0.6 8.5x17.0x24.0 0.6 10.5x21.0x34.0 0.6 10.5x21.0x39.0 0.6 F 5.1 12.1 5.1 12.1 5.1 12.1 5.5 15.5 5.5 15.5 Internal resistance ( max.) at 1kHz Internal resistance (m) at 1kHz (measurement value) 2.0 600 1.0 250 1.0 250 0.4 100 0.4 80 CAT.No.2013/2014E Electric Double Layer Capacitors 5.0 ELNA Parts No. DP /DUJHFDSDFLWDQFH+LJKHQHUJ\W\SH&DSDFLWRUV (R) ELECTRIC DOUBLE LAYER CAPACITORS "POWERCAP" *5((1 &$3 Y& Most suitable for energy storage with large capacitance. Terminals arranged in the same orientation provide easy connection. Unlike batteries, safe and high reliability without containing active and hazardous substances. Unlike batteries, excellent charge and discharge characteristics with no chemical reactions. Large capacitance DZ DP Marking color : White print on a black sleeve Specifications Item Performance Category temperature range () -25 to 60 Tolerance at rated capacitance (%) -20 to 20 Internal resistance at 1 kHz Rated capacitance (F) 500 600 1200 1500 Internal resistance (m) 12 10 10 10 Characteristics at high and low temperature Percentage of capacitance change Endurance (60) Percentage of capacitance change Within 30% of value at 20 Internal resistance Less than five times of the value at 20 Test time 2000 hours Within 30% of the initial measured value Internal resistance Less than four times of the initial specified value Shelf life (60) Test time : 2000 hours ; Same as endurance. Applicable standards Conforms to JIS C5160-1 2009 (IEC 62391-1 2006) Outline Drawing Unit : mm Sleeve Vent F1 D1 Bolt (M5) Capacitance (F) 500 600 1200 1500 L4max. 61 D 35 35 51 51 L 85 105 105 120 F 12.7 12.7 21.8 21.8 Standard Ratings ELNA Parts No. DxL (mm) Internal resistance (m) at 1kHz (measurement value) 500 DP-2R5D507A85 35.0x 85.0 4.0 600 DP-2R5D607AA5 35.0x105.0 3.2 2.5 1200 DP-2R5D128CA5 51.0x105.0 3.0 2.5 1500 DP-2R5D158CC0 51.0x120.0 3.0 Max. operating voltage (V) Rated capacitance (F) 2.5 2.5 Internal resistance are not guaranteed values, but measurement value. We tailor packaged product in series and parallel arrangements according to voltage and capacitance as required. Part numbering system (example : 2.5V600F) Electric Double Layer Capacitors DP Series code 2R5 Max.operating voltage symbol CAT.No.2013/2014E D 607 AA5 Rated capacitance symbol Casing symbol 208 NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use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to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lectric Double Layer Capacitors )LJ6FKHPDWLFRI3ULQFLSOHRI(OHFWULF'RXEOH/D\HU&DSDFLWRU NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. 209 CAT.No.2013/2014E TECHNICAL NOTE ELECTRIC DOUBLE LAYER CAPACITORS 1-4 Construction of DYNACAP The series which consists of coin cells is similar to that of coin-type batteries as shown in Fig.2. DYNACAP contains a single cell or two to three cells stacked in series. Since these series have a large electrode-to-electrode distance and a small electrode area exhibiting a large internal resistance, they are suitable for the memory backup application that involves microcurrent discharge. The cylindrical cell construction as seen in the DZ and DZN series has the construction similar to that of aluminum electrolytic capacitors as shown in Fig.3. (R) These series have a small electrode-to-electrode distance, allowing a large electrode area because of the winding structure. This decreases the internal resistance, which is primary suitable for applications requiring high-power such as motor drive and LED lighting that need high currents. 2 Description of Life Expectancy Generally, the life of Electric Double Layer Capacitors is largely affected by the ambient temperature. The expected life is approximated by the equation as shown below: Where, Gasket Activated carbon electrode Electrolyte Expected lifetime at temperature T Lifetime at temperature Expected working temperature Upper category temperature Cap Note that the above equation does not cover charge and discharge. In the case of charge and discharge, heat generation occurs inside a capacitor; the temperature rise by this heat generation must also be considered. Separator Case Fig.2 Example of Basic Construction of Coin Cell Separator Activated carbon electrode Aluminum case Seal rubber Terminal Fig.3 Example of Basic Construction of Cylindrical Cell Electric Double Layer Capacitors CAT.No.2013/2014E 210 NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use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x9 , :KHUH W'LVFKDUJHWLPH VHF &&DSDFLWRUFDSDFLWDQFH ) 9:RUNLQJYROWDJHUDQJH 9 ,'LVFKDUJHFXUUHQW $ $VDQH[DPSOHZHFDOFXODWHWKHGLVFKDUJHWLPHZKHQ DFDSDFLWRURIWKH'%VHULHV9)LVFKDUJHGZLWK 9 DQG GLVFKDUJHG WR 9 DW D FRQVWDQW FXUUHQW RI P$ 6LQFH WKH ZRUNLQJ YROWDJH UDQJH 9 LV 9 IURP-9W ) x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lectric Double Layer Capacitors 9ROWDJH 'LVFKDUJHFXUYHJLYHQE\FDOFXODWLRQ $FWXDOGLVFKDUJHFXUYH 7LPH )LJ([DPSOHRI'LVFKDUJH&XUYHLQYROYLQJ6HOI'LVFKDUJH NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. 211 CAT.No.2013/2014E TECHNICAL NOTE ELECTRIC DOUBLE LAYER CAPACITORS (R) 4 Series-parallel connection packaged products. Electric Double Layer Capacitors have a low operating voltage per cell. To deal with this, ELNA is ready to offer series packaging for high operating voltages to meet to various needs. Please consult with us on optimization and design. Packaged item Example of packaged item In case of a low voltage (up to about 24 V) for the DZ and DZN series with relatively low capacitance, we are preparing simple packaged products. No full-scale voltage equalization circuit has been equipped yet, but comparatively low cost and flexible layout can be realized. 5 Moisture-proof provision If a electric double layer capacitor is used in a heat-and-high-humidity environment, the characteristic will deteriorate. We can improve the durability in heat-and-high-humidity environment by coating of special resin. Please consult about resin coating. 6 Applications Features & Benefits of Electric Double Layer Capacitor Electric Double Layer Capacitors CAT.No.2013/2014E 212 NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. ELECTRIC DOUBLE LAYER CAPACITORS (R) TECHNICAL DATA 7 Electric Characteristics Data 7-1 Coin type for memory back-up DYNACAP Series DXJ 5.5V 0.33F/DXJ-5R5H334 11.5x5L (mm) DYNACAP Series DHL 5.5V 0.22F/DHL-5R5D224T 13.5x9.5L (mm) 10 Capacitance change (%) Capacitance change (%) Endurance (85 5.5V.DC) 0 -10 -20 -30 -40 -50 0 200 400 600 800 10 0 -10 -20 -30 -40 -50 1000 0 200 400 800 1000 800 1000 Time (h) Time (h) 500 ESR () at 1kHz 500 ESR () at 1kHz 600 400 300 200 100 400 300 200 100 0 0 0 200 400 600 800 0 1000 200 400 600 Time (h) Time (h) 6.0 6.0 5.0 5.0 Voltage (V.) Voltage (V.) Discharge characteristics 4.0 3.0 2.0 4.0 3.0 2.0 1.0 1.0 200uA 100uA 50uA 200uA 100uA 50uA 10uA 10uA 0.0 0.0 1 10 100 1000 1 10000 10 100 1000 10000 Discharge time (m) Discharge time (m) Characteristics at high and low temperature 10 Capacitance change (%) Capacitance change (%) 10 0 -10 DXJ series DX series -20 -30 -40 -50 0 -10 -30 -40 -50 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 DHL series DH series -20 -50 -40 -30 -20 -10 0 Temperature () 500 400 400 ESR () at 1kHz 500 300 200 100 0 300 200 100 0 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 -50 -40 -30 -20 -10 0 Temperature () NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. 10 20 30 40 50 60 70 80 90 Temperature () 213 CAT.No.2013/2014E Electric Double Layer Capacitors ESR () at 1kHz Temperature () 10 20 30 40 50 60 70 80 90 TECHNICAL DATA ELECTRIC DOUBLE LAYER CAPACITORS (R) DYNACAP Series DZK 3.3V 0.22F/DSK-3R3H224 6.8x2.1L (mm) Capacitance change(%) Endurance (60 3.3V.DC) 10 0 -10 -20 -30 -40 -50 0 200 400 600 800 1000 800 1000 Time (h) ESR() at 1kHz 500 400 300 200 100 0 0 200 400 600 Time (h) Discharge characteristics 3.5 Voltage (V.) 3.0 2.5 2.0 1.5 1.0 200uA 100uA 50uA 0.5 10uA 1uA 0 1 10 100 1000 10000 Discharge time (m) Characteristics at high and low temperature Capacitance change(%) 10 0 -10 -20 -30 -40 -50 -20 -10 0 10 20 30 40 50 60 70 50 60 70 Temperature () Electric Double Layer Capacitors ESR() at 1kHz 500 400 300 200 100 0 -20 -10 0 10 20 30 40 Temperature () CAT.No.2013/2014E 214 NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. TECHNICAL DATA ELECTRIC DOUBLE LAYER CAPACITORS (R) &\OLQGULFDOW\SHIRUSRZHU '<1$&$36HULHV'=1 9)'=15'7x/ PP '<1$&$36HULHV'=1 9)'=15'7x/ PP (QGXUDQFH 9'& (QGXUDQFH 9'& &DSDFLWDQFHFKDQJH &DSDFLWDQFHFKDQJH i i i i i i i i i i (65 P DWN+] (65 P DWN+] 7LPH K 7LPH K 7LPH K 7LPH K 9ROWDJH 9 9ROWDJH 9 'LVFKDUJHFKDUDFWHULVWLFV $ $ P$ P$ $ $ $ P$ P$ 'LVFKDUJHWLPH VHF 'LVFKDUJHWLPH VHF &KDUDFWHULVWLFVDWKLJKDQGORZWHPSHUDWXUH (65 P DWN+] i i '=VHULHV '=1VHULHV i '=VHULHV '=1VHULHV i i i i i 7HPSHUDWXUH NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. i i i 7HPSHUDWXUH 215 CAT.No.2013/2014E Electric Double Layer Capacitors &DSDFLWDQFHFKDQJH NYD )RU'&/LQNFLUFXLWV (R) PLASTIC FILM CAPACITORS '&/,1. Used in DC-Link circuits, can replace electrolytic capacitor. PP film design, good temperature characteristics, stable capacity, low ESR, high ripple current handing capabilities, low Ls, long life. Aluminum case, filled with fire-retardant resin. Self-healing property. Used in lnverters of wind power and solar power, HEV or EV, welders, elevators, Motor Driver systems. Specifications Performance 40 to 85 10 Item Category temperature range () Tolerance at rated capacitance (%) Rated Rated Rated Rated Rated Over Voltage (at Hotspot in capacitor) (20, 50 to 120Hz) 30% of on-load-duration 30 min/day 5 min/day 1 min/day 3 ms every time, 100ms/day voltage x1.1 voltage x1.15 voltage x1.2 voltage x1.3 voltage x1.5 2x10-4 or less 100000 hours 50Fit Dielectric Dissipation Factor Life Expectancy Failure Rate Between Terminals Between Terminals and Case Withstanding DC Voltage (at Hotspot in capacitor = 70) Rated voltage x 1.5 10s 3000 VAC 10s Insulation Resistance Reference Standard (20, 50Hz) 5000MF or less IEC 61071 Outline Drawing (20, 100V DC, 1min) Unit : mm Part numbering system (1100V420F) M12x16 NYD 1100 Rated voltage symbol V 421 K FD6 6BB Rated capacitance symbol Capacitance tolerance symbol Casing symbol Additional symbol D P Marking Series code M6x10 L D P0.1 75 32 85 32 116 50 Cautions 1.Please do not exceed the specified current. 2.Please confirm voltage waveform and do not exceed the specified voltage. 3.The expected life time changes under the effect of the applied voltage and the inside temperature of the capacitor. Please refer to the following figure. 1000000 70 60 50 Expected life timeh Hotspot in capacitor 100000 85 50 60 70 85 10000 1000 0.8 0.9 1.0 1.1 1.2 1.3 1.4 Working / Rated voltage CAT.No.2013/2014E 216 NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. 1<' 3/$67,&),/0&$3$&,7256 Certifications of Quality Management System (as of Sep. 2012) Standard Ratings Factory ELNA CO., LTD. SHIRAKAWA Tech. (Japan) ELNA TOHOKU CO., LTD. AOMORI Factory (Japan) TANIN ELNA CO., LTD. (Thailand) ELNA-SONIC SDN. BHD. (Malaysia) Applicable Standard ISO 9001 ISO/TS 16949 Certification Number JP05/060268 IATF0089622 44 111 060686 Item Aluminum electrolytic capacitors Electric double layer capacitors Aluminum electrolytic capacitors Electric double layer capacitors Aluminum electrolytic capacitors Electric double layer capacitors Applicable Organization Rated voltage Rated capacitance V (F) SGS TUV ISO 9001 04100 1999 0506 ISO/TS 16949 IATF0110000 SGS MY04/0675 Aluminum electrolytic capacitors SGS ISO 9001 SG02/20012 Aluminum electrolytic capacitors SGS 880 TUV 1100 Certifications of Environmental Management System (as of Sep. 2012) Factory ELNA TOHOKU CO., LTD. AOMORI Factory (Japan) TANIN ELNA CO., LTD. (Thailand) ELNA-SONIC SDN. BHD. (Malaysia) Applicable Standard ISO 14001 Certification Number JQA-EM2918 Applicable Organization Japan Quality Assurance (JQA) Case (mm) D L Casing symbol Maximum current Thermal resistance Maximum peak current Series resistance Self-inductance Arms (K/W) A (m) (nH) ELNA Parts No. 220 85 70 F70 50 5.6 2640 1.9 60 NYD-880V221KF706BB 260 75 95 E95 45 5.6 2600 2.8 80 NYD-880V261KE956BB 350 85 95 F95 50 5.1 3500 2.4 60 NYD-880V351KF956BB 440 116 70 H70 65 5.8 5280 1.5 60 NYD-880V441KH706BB 480 85 120 FC0 55 4.7 3840 2.8 60 NYD-880V481KFC06BB 550 85 136 FD6 50 4.6 3850 3.0 60 NYD-880V551KFD66BB 700 116 95 H95 70 5.4 7000 1.7 60 NYD-880V701KH956BB 750 85 173 FH3 55 4.3 6750 3.7 60 NYD-880V751KFH36BB 970 116 120 HC0 75 5.0 5820 1.9 60 NYD-880V971KHC06BB 1100 116 132 HD2 75 4.9 6600 2.0 60 NYD-880V112KHD26BB 1500 116 173 HH3 80 3.4 13500 2.4 60 NYD-880V152KHH36BB 100 75 70 E70 35 6.0 1200 2.5 80 NYD-1100V101KE706BB 140 85 70 F70 45 5.6 1680 2.1 60 NYD-1100V141KF706BB 170 75 95 E95 40 5.6 1700 3.2 80 NYD-1100V171KE956BB 230 75 120 EC0 40 4.7 1840 4.1 80 NYD-1100V231KEC06BB 260 75 136 ED6 40 4.6 2080 4.4 80 NYD-1100V261KED66BB 280 116 70 H70 60 5.8 2800 1.6 60 NYD-1100V281KH706BB 350 75 173 EH3 40 4.2 3500 5.6 80 NYD-1100V351KEH36BB 420 85 136 FD6 55 4.6 3200 2.2 60 NYD-1100V421KFD66BB 450 116 95 H95 65 5.4 4500 1.9 60 NYD-1100V451KH956BB 480 85 173 FH3 50 4.3 4800 4.3 60 NYD-1100V481KFH36BB 610 116 120 HC0 70 5.0 5490 2.2 60 NYD-1100V611KHC06BB 700 116 132 HD2 70 4.9 6300 2.3 60 NYD-1100V701KHD26BB 940 116 173 HH3 70 3.4 9400 1.6 60 NYD-1100V941KHH36BB 1100 116 230 HN0 80 2.7 11000 1.5 100 NYD-1100V112KHN06BB 70 75 70 E70 35 6.0 1050 2.8 80 NYD-1320V700KE706BB ISO 14001 04104 1999 0506E5 TUV 110 75 95 E95 35 5.6 1540 3.8 80 NYD-1320V111KE956BB 160 75 120 EC0 40 4.7 1600 4.6 80 NYD-1320V161KEC06BB 180 75 136 ED6 40 4.6 1800 5.1 80 NYD-1320V181KED66BB ISO 14001 SG03/60718 SGS 220 85 120 FC0 45 4.7 2200 3.6 60 NYD-1320V221KFC06BB 260 85 136 FD6 45 4.6 2600 3.9 60 NYD-1320V261KFD66BB 310 116 95 H95 65 5.4 3720 2.0 60 NYD-1320V311KH956BB 340 85 173 FH3 50 4.3 4080 4.9 60 NYD-1320V341KFH36BB NYD-1320V421KHC06BB 1320 420 116 120 HC0 65 5.0 4200 2.4 60 480 116 132 HD2 70 4.9 4800 2.6 60 NYD-1320V481KHD26BB 660 116 173 HH3 70 3.4 7920 3.1 60 NYD-1320V661KHH36BB Please read the following warning and cautions !! The Electronic components shown in this catalog are designed and produced mainly for such general purpose electronic equipment as audio and visual equipment, home appliances, office equipment and information processing and communication equipment. If you wish to use these components in medical equipment, transportation equipment, (automotive, train, ships, etc), aircraft, spacecraft, security systems or other equipment that requires high security application, you are required to confirm application through your own testing and own judgment. Regardless of a component intended use, if high safety application is required, it is recommended that you shall establish a protective or redundant circuit and shall conduct own evaluation test. It is highly recommended that you shall follow our "Cautions for using" Also it is recommended that you shall obtain technical specifications from Elna Co., Ltd to ensure that the component is suitable for your intended use. It is not our responsibility for any kind of problems without technical specifications. Specifications and dimensions shown in this catalog are subject to change without prior notice. NOTE CAT.No.2013/2014E Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. 217 &$71R( 3-8-11 Shin-Yokohama,Kouhoku-ku,Yokohama-city, Kanagawa, 222-0033 Japan TEL. +81-45-470-7251 FAX. +81-45-470-7261 SHIGA FACTORY 30 Ta-cho, Nagahama-city, Shiga, 529-0142 Japan TEL. +81-749-73-3021 FAX. +81-749-73-2175 SHIRAKAWA OFFICE 9-32 Aza-sugiyama, Oaza-yone, Nishigo-mura, Nishishirakawa-gun, Fukushima, 961-8031 Japan TEL. +81-248-48-1654 FAX. +81-248-25-5614 SALES OFFICE 2013 / 2014E HIGH QUALITY CAPACITORS HEAD OFFICE AFFILIATED COMPANY ELNA AMERICA.,INC. 3600 Dallas Hwy.,Ste.230 #389 Marietta, GA 30064, U.S.A. TEL. +1-678-261-8284 FAX. +1-678-815-0892 ELNA ELECTRONICS SINGAPORE PTE.LTD. 103 Kallang Avenue, #04-01 AIS Industrial Building Singapore 339504 TEL. + 6 5 - 6 2 9 3 0 1 8 1 FAX. + 6 5 - 6 2 9 6 6 7 1 6 ELNA (SHANGHAI) CO.,LTD. Room 6203, Rui Jin Hotel Business Center 118 Rui Jin 2 Road, Shanghai, China Post Code 200020 TEL. +86-21-64452269 FAX. +86-21-64452271 ELNA BANGKOK SALES OFFICE 88.90. Chalermphrakiat Rama 9 Road, Nongborn, TEL. + 6 6 - 2 - 3 9 8 5 3 3 3 Pravct, Bangkok 10250, Thailand FAX. + 6 6 - 2 - 3 9 8 5 3 3 7 ELNA MALAYSIA PENANG SALES OFFICE 2473, Tingkat Perusahaan 6, Free Trade Zone, Prai Industrial Estate, 13600 Prai, Penang, Malaysia TANIN ELNA CO.,LTD. HEAD OFFICE 88.90. Chalermphrakiat Rama 9 Road, Nongborn, Pravet, Bangkok 10250, Thailand CHIANGMAI FACTORY 56 Mahidoal Road T.Sutep A.Muang Chiangmai 50200, Thailand. TEL. + 6 6 - 2 - 3 9 8 5 3 3 3 FAX. + 6 6 - 2 - 3 9 8 5 3 3 7 TEL. + 6 6 - 5 3 - 2 7 0 2 0 6 FAX. + 6 6 - 5 3 - 2 7 5 0 6 4 ELNA-SONIC SDN.BHD. 2473, Tingkat Perusahaan 6, TEL. + 6 0 - 4 - 3 9 9 2 9 1 6 Free Trade Zone, Prai Industrial Estate, FAX. + 6 0 - 4 - 3 9 9 2 9 2 5 Sales office TEL. + 6 0 - 4 - 3 9 8 5 3 6 9 13600 Prai, Penang, Malaysia. ELNA TOHOKU CO.,LTD. AOMORI FACTORY 1-349-1 Okonoki, Kuroishi-city Aomori, 036-0357 Japan TEL. +81-172-52-4166 FAX. +81-172-53-4609 TEL. + 6 0 - 4 - 3 9 8 5 3 6 9 EASTERN JAPAN OFFICE 3-8-11 Shin-Yokohama,Kouhoku-ku,Yokohama-city TEL. +81-45-470-7254 Kanagawa, 222-0033 Japan FAX. +81-45-470-7260 WESTERN JAPAN OFFICE 6-1-15 Nishinakajima Yodogawa-ku, Osaka-city, Osaka, 532-0011 Japan CAUTION Observe the following to ensure safe operation. NOTE TEL. +81-6-6304-6831 FAX. +81-6-6304-8638 High Quality CAPACITORS CO.,LTD. 1. Since the contents contained are subject to changes in specifications, dimensions and so forth without notice due to modification, please confirm the contents when placing an order. If any of the matters described here are unclear, please inquire at one of our nearby sales offices. 2. The contents of this catalog are valid as of December 2012. CAT.No.2013/2014E Electronic Components 1. The models and specification values contained in this catalog are for reference purposes only. During actual use or when placing an order, please request "drawings"and make your purchase or use the purchased product based on those drawings. 2. In order to ensure that products are used correctly and safely, always make sure to read the cautions for using prior to using the product. ALUMINUM ELECTROLYTIC CAPACITORS WITH CONDUCTIVE POLYMER SOLID ELECTROLYTE ALUMINUM ELECTROLYTIC CAPACITORS ELECTRIC DOUBLE LAYER CAPACITORS DYNACAP(R)" PLASTIC FILM CAPACITORS CO.,LTD. CAT.No.2013/2014E Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Elna: RVO-50VR10MD55P2U-R2 RVO-10V100MD55P2U-R2 RVO-10V330ME55P2U-R2 RVO-25V100ME55P2U-R2 RVO-16V220ME55P2U-R2 RVO-10V470MF55P2U-R2 RVO-16V330MF55P2U-R2 RVO-50V010MD55P2U-R2 RVO16V100MD55P2U-R2 RVO-35V3R3MD55P2U-R2 RVO-50V100MF55P2U-R2 RVO-50V4R7ME55P2U-R2 RVO10V220ME55P2U-R2 RVO-25V330MF55P2U-R2 RVO-50VR47MD55P2U-R2 RVO-6V470ME55P2U-R2 RVO6V220MD55P2U-R2 RVO-6V330ME55P2U-R2 RVO-50VR33MD55P2U-R2 RVO-50VR22MD55P2U-R2 RVO35V100ME55P2U-R2 RVO-6V101MF55P2U-R2 RVO-35V4R7MD55P2U-R2 RJ4-400V100MI5#-T4 RVO50V2R2MD55P2U-R2 RVO-16V470MF55P2U-R2 RVO-35V220MF55P2U-R2 RVO-10V101MF55P2U-R2 RVO25V220MF55P2U-R2 RVO-50V3R3MD55P2U-R2 RVO-16V4R7MD55P2U-R2