Thermal Imager Data Sheet Reap the benefits of a high resolution thermal imager that fits within your available budget. With the Fine Resolution capability, you can achieve effective resolution of 320 x 240 pixels from a 160 x 120 pixels detector - four times more resolution, four times more details. * Four times more pixels with Fine Resolution capability * View finer object details with 4x digital zoom * Quick access buttons to easily change settings or functions * Long product warranty - 3 years * Ergonomically designed with evenly distributed weight * In-camera monitoring for temperature trending * Ability to focus on objects, as close as 10 cm away See MORE. Accomplish MORE. Expect MORE. SEE MORE with U5855A Thermal Imager Perform more in-camera measurements and analysis Get more details with Fine Resolution Fine Resolution is a technology that restores the details originally inherent to the object while enhancing the resolution, at the same time minimizing fuzziness and noise. It is accomplished by performing sophisticated calculations on continuous multi-frames of the image - evaluated for misalignment caused mainly by hand tremor. The firmware then detects and corrects the information between images through one feature pixel. Capture thermal images effectively with its intuitive and easy to use tools: * Configurable quick access buttons that are able to change functions based on user preference. * Monitor temperature trends over time for quality checks when monitoring process parameters in industrial plant automation * Perform analysis using its extensive range of measurement tools. * Coupled with the U5855A's high sensitivity of 0.07 C, it can detect the slightest temperature difference to provide more accurate temperature readings. Continuous multi-frames of low resolution images Four times more resolution, noise eliminated Figure 2. Center spot, min and max tracking, three moveable spots. With Fine Resolution, * Get an effective 320 x 240 pixels of radiometric JPEG IR image which is clearer and sharper * See fine details on objects as close as 10cm, especially when measuring temperature on small components which are close to each other. Figure 3. Three moveable boxes with statistics * With 4x digital zoom, magnify a thermal image of a far-away objects quickly to identify anomalies and to reveal even finer details. * These are essential for industrial, building inspection, electronics, as well as medical research. Figure 4. Delta temperature Figure 1. Samples of IR images 2 Ergonomically designed for comfort The ergonomically built TrueIR thermal imager is designed to let you carry out daily tasks comfortably. With its evenly distributed weight of only 746 grams and good stability, it fits comfortably in your palm without straining your hands, even when used over a long period of time. With a stable grip, it allows you to single-handedly capture more images and to work more efficiently. Figure 5. Ergonomically designed to have distributed weight. It can even stand on its own! Figure 6. Good grip with belt support TrueIR Analysis and Reporting Tool Import, analyze, edit and present your thermal images to your clients swiftly with TrueIR analysis and reporting tool. With this PC software, you could change color settings and corrective parameters, add color alarm, or pick and choose any of the six measurement analysis tools or diagrams to help you present your findings to your customers clearly. Features: * Change color settings and corrective parameters, like emissivity, ambient temperature, atmospheric temperature, and more Also, generate reports quickly with the help of ready templates and then customize them accordingly based on your clients' requirements. * Capable to display thermal image, visual image, thermal-visual side-by-side, or fusion images as well as its associated photo or note tags * Set color alarm * Choose between six measurement analysis tools or diagrams like spot, line, line profile, box, histogram and delta temperature * Create reports based on available templates and then customize them to suit your client' needs * Generate reports in Microsoft Words or PDF * Eleven local languages to choose from - English, Spanish, Italian, French, German, Portuguese, simplified Chinese, traditional Chinese, Japanese, Korean and Russian Download for free from www.agilent.com/find/TrueIR_ART Figure 8. Sample of measurement analysis diagrams Figure 7. TrueIR Analysis and Reporting Tools GUI 3 Front and Back Panels Front panel Large 3.5 inch color LCD display Navigation/Enter key Light/Laser control key Power On/Off key View/Zoom key Back/Exit key Play/Delete key Auto/Manual scale key Quick access buttons to easily change settings or functions Adjustable hand strap for better grip (for right-handed or left-handed use) Back panel Torch light Video out port Laser pointer DC power inlet Visible image camera Infrared (IR) image camera lens (with shutter) Focus adjustment ring Camera trigger key SD memory card slot USB Mini-B port 4 Specifications Specifications are warranted in the temperature range of 0 to 40 C and after 2 minutes of power up, unless otherwise noted. Supplemental characteristics - which are not warranted, but are descriptions of performance - are determined either by design or testing. Performance Specifications Parameter Specification Basic Performance Temperature measurement range -20 ~ 350 C Range 1: -20 to 120 C Range 2: 0 to 350 C Thermal sensitivity Range 1: 0.07 C (at 30 C) Range 2: 0.1 C (at 30 C) Accuracy1 At 0 ~ 40 C ambient temperature 2 C or 2% (whichever is greater) Detector type Uncooled Focal Plane Array (-Si) Detector Resolution 160 x 120 Fine Resolution 320 x 240 (IR pixels) Spectral range 8 to 14 m Frame rate 9 Hz Field of view (FOV) 28 (H) x 21 (V) Spatial resolution (IFOV) Fine Resolution OFF: 3.1 mRad Fine Resolution ON: 2.1 mRad Focal distance 10 cm to infinity Focus mechanism Manual focus Image Processing and Enhancement Correction parameters Emissivity, reflected temperature, object distance, ambient temperature, humidity, transmissivity Emissivity correction 0.1 to 1.0 Predefined emissivity table Digital zoom Zoom ratio: 4x continuous Color palette Rainbow, iris, hot iron, gray, inverted gray Camera mode IR image, visible image, picture in picture, blend Measurements and Alarm Measurements Center spot, 3x moveable spots, max/min tracking, delta temperature, 3x moveable boxes (with min/max/avg) Color alarm High/low temperature in all areas Alarm zones: Above/below/inside/outside 1. Minimum distance with accuracy, 10 cm to 50 cm: 4 C or 4%. 5 Supplemental Characteristics Parameter Characteristic Storage device Supports up to 32 GB SDHC memory card with class 4 and above Image format IR image: Radiometric JPEG Visible image: JPEG State storage memory Three user-configurable stored states Tagging/annotation 3 photo tags, note tag, note tag from template (downloadable from the Agilent Web site) I/O USB 2.0 mass storage NTSC/PAL via video RCA cable Language English, French, German, Italian, Japanese, Korean, Portuguese, Russian, Spanish, Simplified Chinese, Traditional Chinese Built-in quick start tutorial Available Product Characteristics Product Characteristic Power supply Power adapter * * * * Line voltage range: 50/60 Hz, 100 - 240 VAC (Auto/Universal voltage), 1.2 A MAINS supply voltage fluctuations not to exceed 10% of the nominal voltage Output voltage: 12 VDC, 3 A Installation Category I (Isolated ELV supply source - connected to MAINS through an AC/DC power adapter) Battery * Li-Ion rechargeable battery, 7.4 VDC, 2500 mAh * Operating time: 4 hours Display 3.5" TFT Visible camera 3.1 MP Built-in led torch Available Laser pointer Class 2 Warm-up time 2 minutes Operating environment Temperature Humidity Storage compliance Temperature Humidity * -15 C to 50 C * 50% RH to 95% RH at 40 C * -40 C to 70 C * 95% RH at 40 C Altitude * Up to 2000 m Pollution degree Safety compliance * 2 * Laser safety: IEC 60825-1:2001/EN 60825-1:2001 (Laser Class 2) * IEC 61010-1:2010/EN 61010-1:2010 EMC compliance * IEC 61326-1:2005/EN61326-1:2006 * CISPR11:2003/EN55011:2007, Group 1 Class A * Canada: ICES/NMB-001: Issue 4, June 2006 * Australia/New Zealand: AS/NZS CISPR 11:2004 Shock Tested to IEC 60068-2-27 Ed. 3.0 Vibration Tested to IEC 60068-2-6 Drop test 2m Protection class 2 IP rating IP 54 Dimensions (W x H x D) 95 x 250 x 85 mm Weight 0.746 kg (with battery) Warranty Refer to www.agilent.com/go/warranty_terms 3 years for the product 3 months for the standard accessories unless otherwise specified Calibration cycle 1 year 6 Ordering information Standard shipped accessories Power adapter with power cord Rechargeable Li-Ion battery SD memory card Video RCA to RCA interface cable, 2 m USB Standard-A to Mini Type-B interface cable, 1 m Rugged, hard carrying case Quick start guide Certificate of calibration U5855A Optional accessories U5751A Power adapter (with power cord) U5752A Rechargeable Li-Ion battery U5753A External battery charger (2-bay) U5761A Video RCA to RCA interface cable, 2 m U5762A USB Standard-A to Mini Type-B interface cable, 1 m U5771A Rugged carrying case, hard U5772A Hand strap, Adjustable for right-handed and left-handed use 7 www.agilent.com www.agilent.com/find/trueIRimager myAgilent myAgilent www.agilent.com/find/myagilent For more information on Agilent Technologies' products, applications or services, please contact your local Agilent office. The complete list is available at: Three-Year Warranty www.agilent.com/find/ThreeYearWarranty Americas A personalized view into the information most relevant to you. Beyond product specification, changing the ownership experience. Agilent is the only test and measurement company that offers threeyear warranty on all instruments, worldwide. www.agilent.com/find/contactus Canada Brazil Mexico United States (877) 894 4414 (11) 4197 3600 01800 5064 800 (800) 829 4444 Asia Pacific Australia China Hong Kong India Japan Korea Malaysia Singapore Taiwan Other AP Countries 1 800 629 485 800 810 0189 800 938 693 1 800 112 929 0120 (421) 345 080 769 0800 1 800 888 848 1 800 375 8100 0800 047 866 (65) 375 8100 Europe & Middle East Belgium Denmark Finland France Germany Ireland Israel Italy Netherlands Spain Sweden United Kingdom 32 (0) 2 404 93 40 45 45 80 12 15 358 (0) 10 855 2100 0825 010 700* *0.125 /minute 49 (0) 7031 464 6333 1890 924 204 972-3-9288-504/544 39 02 92 60 8484 31 (0) 20 547 2111 34 (91) 631 3300 0200-88 22 55 44 (0) 118 927 6201 For other unlisted countries: www.agilent.com/find/contactus (BP-01-15-15) Product specifications and descriptions in this document subject to change without notice. (c) Agilent Technologies, Inc. 2014 Published in USA, April 10, 2014 5991-4297EN