SPEC NO: DSAD2344 REV NO: V.8 DATE: APR/02/2011 PAGE: 2 OF 7
APPROVED: WYNEC CHECKED: Joe Lee DRAWN: J.Yu ERP: 1301000967
Selection Guide
Note:
1. Luminous intensity/ luminous Flux: +/-15%.
Absolute Maximum Ratings at TA=25°C
Electrical / Optical Characteristics at TA=25°C
Notes:
1.Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
Notes:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
2. 2mm below package base.
Part No. Dice Lens Type
Iv (ucd) [1]
@ 10mA
Min. Typ.
SC40-18GWA Green (GaP) White Diffused 14000 36000 Common Cathode, Rt.
Hand Decimal.
Description
Symbol Parameter Device Typ. Max. Units Test Conditions
λpeak Peak Wavelength Green 565 nm IF=20mA
λD [1] Dominant Wavelength Green 568 nm IF=20mA
Δλ1/2 Spectral Line Half-width Green 30 nm IF=20mA
C Capacitance Green 15 pF VF=0V;f=1MHz
VF [2] Forward Voltage
Per Segment Or (DP) Green 8.8
(4.4)
10.0
(5.0) V IF=20mA
IR Reverse Current
Per Segment Or (DP) Green 20
(10) uA VR=5V
Parameter Green Units
Power dissipation
Per Segment Or (DP)
500
(125) mW
DC Forward Current
Per Segment Or (DP)
50
(25) mA
Peak Forward Current [1]
Per Segment Or (DP)
280
(140) mA
Reverse Voltage
Per Segment Or (DP) 5 V
Operating / Storage Temperature -40°C To +85°C
Lead Solder Temperature[2] 260°C For 3-5 Seconds