7
Dimensions are in millimeters (inches) www.fcai.fujitsu.com
Specications
subject to change
n FEATURES
The 700 series connector has a superior ejector with a
unique exible latch. Terminals are palladium plated and
have an excellent cost performance ratio. The solder dip
section is a 0.5 mm (0.020 in.) square and can be used
in a φ0.8 mm (0.031 in.) through hole. Special strain
relief prevents breakage. Two kinds of keys and bump
polarization prevent incorrect insertion. Connectors with 4
mm (0.157 in.) long tails are also available for mounting on
multilayer PC boards.
n SPECIFICATIONS
Item
Operating temperature range
Current rating
Voltage rating
Contact resistance
Insulation resistance
Dielectric strength
Insertion force
Withdrawal force
Applicable wire
Applicable wire-wrapping
wire
Applicable PC board
(standard)
–55°C to +105°C
DC 1 A
AC 250 V
120 mΩ max. (DC 6 V, 0.1 A)
1000 MΩ min. (DC 500 V)
AC 500 V for 1 minute
3.5 kg max. (10 pins), 21 kg max.
(60 pins)
0.25 kg min. (10 pins), 2.5 kg min.
(60 pins)
Flat cable: 1.27 mm (0.050 in.) pitch
AWG #28 (stranded wires) or AWG
#30 (solid wire)
AWG #26 to #30 (solid wire)
1.6 mm (0.062 in.) for standard
terminal, 3.2 mm (0.125 in.) for
long tail
n MATERIALS
Polyester (UL94V-0)
Copper alloy
Contact
Terminal
Gold
Palladium
Item
Insulating material
Conductor
Plating
PC BOARD CONNECTORS
700 SERIES
8
Dimensions are in millimeters (inches) www.fcai.fujitsu.com
Specications
subject to change
SOCKET
n DIMENSIONS
Unit: mm (in.)
n CONFIGURATION BY THE NUMBER OF PINS
n PART NUMBERS
10
14
16
20
26
30
34
40
50
60
Type
n DIMENSIONS
10
14
16
20
26
30
34
40
50
60
A
32.0 (1.25)
37.1 (1.46)
39.6 (1.56)
44.7 (1.76)
52.3 (2.06)
57.4 (2.26)
62.5 (2.46)
70.1 (2.76)
82.8 (3.26)
95.5 (3.76)
B
21.8 (.858)
26.9 (1.06)
29.4 (1.16)
34.5 (1.36)
42.2 (1.66)
47.2 (1.86)
52.3 (2.06)
59.9 (2.36)
72.6 (2.86)
85.3 (3.36)
C
27.9 (1.10)
33.0 (1.30)
35.5 (1.40)
40.6 (1.60)
48.3 (1.90)
53.3 (2.10)
58.4 (2.30)
66.0 (2.60)
78.7 (3.10)
91.4 (3.60)
D
10.16 (0.400)
15.24 (0.600)
17.78 (0.700)
22.86 (0.900)
30.48 (1.20)
35.56 (1.40)
40.64 (1.60)
48.26 (1.90)
60.96 (2.40)
73.66 (2.90)
E
18.3 (0.720)
23.4 (0.921)
25.9 (1.02)
31.0 (1.22)
38.6 (1.52)
43.7 (1.72)
48.8 (1.92)
56.4 (2.22)
69.0 (2.72)
81.8 (3.22)
F
32.3 (1.27)
37.4 (1.47)
39.9 (1.57)
45.0 (1.77)
52.6 (2.07)
57.7 (2.27)
62.8 (2.47)
70.4 (2.77)
83.0 (3.26)
95.8 (3.77)
F’
26.3 (1.04)
31.4 (1.24)
33.9 (1.33)
39.0 (1.54)
46.6 (1.83)
51.7 (2.04)
56.8 (2.24)
64.4 (2.54)
77.0 (3.03)
89.8 (3.33)
G
17.3 (0.681)
22.4 (0.881)
24.9 (0.980)
30.0 (1.18)
37.6 (1.48)
42.7 (1.68)
47.8 (1.88)
55.4 (2.18)
68.1 (2.68)
80.8 (3.18)
H
11.43 (0.450)
16.51 (0.650)
19.05 (0.750)
24.13 (0.950)
31.75 (1.25)
36.83 (1.45)
41.91 (1.65)
49.53 (1.95)
62.23 (2.45)
74.93 (2.95)
FCN-707J010-AU/0
FCN-707J014-AU/0
FCN-707J016-AU/0
FCN-707J020-AU/0
FCN-707J026-AU/0
FCN-707J030-AU/0
FCN-707J034-AU/0
FCN-707J040-AU/0
FCN-707J050-AU/0
FCN-707J060-AU/0
FCN-707J010-AU/B
FCN-707J014-AU/B
FCN-707J016-AU/B
FCN-707J020-AU/B
FCN-707J026-AU/B
FCN-707J030-AU/B
FCN-707J034-AU/B
FCN-707J040-AU/B
FCN-707J050-AU/B
FCN-707J060-AU/B
FCN-707B010-AU/0
FCN-707B014-AU/0
FCN-707B016-AU/0
FCN-707B020-AU/0
FCN-707B026-AU/0
FCN-707B030-AU/0
FCN-707B034-AU/0
FCN-707B040-AU/0
FCN-707B050-AU/0
FCN-707B060-AU/0
FCN-707B010-AU/B
FCN-707B014-AU/B
FCN-707B016-AU/B
FCN-707B020-AU/B
FCN-707B026-AU/B
FCN-707B030-AU/B
FCN-707B034-AU/B
FCN-707B040-AU/B
FCN-707B050-AU/B
FCN-707B060-AU/B
Bump type
30
23
21
17
14
12
11
9
7
6
9
Dimensions are in millimeters (inches) www.fcai.fujitsu.com
Specications
subject to change
IDC HEADER M6 SERIES
n DIMENSIONS
Unit: mm (in.)
n PART NUMBERS AND DIMENSIONS
10
14
16
20
26
30
34
40
50
60
FCN-707P010-AU/0
FCN-707P014-AU/0
FCN-707P016-AU/0
FCN-707P020-AU/0
FCN-707P026-AU/0
FCN-707P030-AU/0
FCN-707P034-AU/0
FCN-707P040-AU/0
FCN-707P050-AU/0
FCN-707P060-AU/0
A
32.0
(1.25)
37.1
(1.46)
39.62
(1.56)
44.7
(1.76)
52.32
(2.06)
57.4
(2.26)
62.48
(2.46)
70.1
(2.76)
82.8
(3.26)
95.5
(3.76)
B
26.80
(1.06)
31.90
(1.26)
34.42
(1.36)
39.50
(1.56)
47.12
(1.86)
52.20
(2.06)
57.28
(2.26)
64.90
(2.56)
77.60
(3.06)
90.30
(3.56)
C
18.3
(.720)
23.4
(.921)
25.9
(1.02)
31.0
(1.22)
38.6
(1.52)
43.7
(1.72)
48.8
(1.92)
56.4
(2.22)
69.1
(2.72)
81.8
(3.22)
D
10.16
(.400)
15.24
(.600)
17.78
(.700)
22.86
(.900)
30.48
(1.20)
35.56
(1.40)
40.64
(1.60)
48.26
(1.90)
60.96
(2.40)
73.66
(2.90)
E
11.43
(.450)
16.51
(.650)
19.05
(.750)
24.13
(.950)
31.75
(1.25)
36.83
(1.45)
41.91
(1.65)
49.53
(1.95)
62.23
(2.45)
74.93
(2.95)
F
13.43
(.528)
18.53
(.729)
21.03
(.828)
26.13
(1.03)
33.73
(1.33)
38.83
(1.53)
43.93
(1.73)
51.53
(2.03)
64.23
(2.53)
76.93
(3.03)
J
20.2
(.795)
25.3
(.996)
27.8
(1.09)
32.9
(1.29)
40.5
(1.59)
45.6
(1.79)
50.7
(2.00)
58.3
(2.29)
71.0
(2.79)
83.7
(3.29)
FCN-707P010-AU/M6
FCN-707P014-AU/M6
FCN-707P016-AU/M6
FCN-707P020-AU/M6
FCN-707P026-AU/M6
FCN-707P030-AU/M6
FCN-707P034-AU/M6
FCN-707P040-AU/M6
FCN-707P050-AU/M6
FCN-707P060-AU/M6
H
18.3
(.720)
23.4
(.921)
25.9
(1.02)
31.0
(1.22)
38.6
(1.52)
43.7
(1.72)
48.8
(1.92)
56.4
(2.22)
69.1
(2.72)
81.8
(3.22)
G
13.43
(.528)
18.53
(.729)
21.03
(.828)
26.13
(1.03)
33.73
(1.33)
38.83
(1.53)
43.93
(1.73)
51.53
(2.03)
64.23
(2.53)
76.93
(3.03)
DISCONTINUED
10
Dimensions are in millimeters (inches) www.fcai.fujitsu.com
Specications
subject to change
THROUGH HOLE SOCKET
n DIMENSIONS
Unit: mm (in.)
n PART NUMBERS AND DIMENSIONS
10
14
16
20
26
30
34
40
50
60
FCN-704J010-AU/0
FCN-704J014-AU/0
FCN-704J016-AU/0
FCN-704J020-AU/0
FCN-704J026-AU/0
FCN-704J030-AU/0
FCN-704J034-AU/0
FCN-704J040-AU/0
FCN-704J050-AU/0
FCN-704J060-AU/0
A
10.16 (0.400)
15.24 (0.600)
17.78 (0.700)
22.86 (0.900)
30.48 (1.20)
35.56 (1.40)
40.64 (1.60)
48.26 (1.90)
60.96 (2.40)
73.66 (2.90)
B
17.3 (0.681)
22.4 (0.881)
24.9 (0.980)
30.0 (1.18)
37.6 (1.48)
42.7 (1.68)
47.8 (1.88)
55.4 (2.18)
68.1 (2.68)
80.8 (3.18)
11
Dimensions are in millimeters (inches) www.fcai.fujitsu.com
Specications
subject to change
ACCESSORIES KEY, LOCK
n DIMENSIONS
Unit: mm (in.) Unit: mm (in.)
n SPECIFICATION OF POLARITY TO PREVENT INCORRECT INSERTION
Notes: • See the next page for cable termination.
• See the next page for IDC tools.
• The last digit (0) of the part number is zero.
• Use tapping screws JIS B1122, 2.5x6 to mount a straight connector on PC boards.
• Socket (pin type)
FCN-707J050-AU/B #
Basic part number
Common
Pin number with pin polarity
Example
04: FCN-700A1 plugged into pin
4
Note: The specication method is the
same for IDC plugs and through
hole sockets.
s
s
12
Dimensions are in millimeters (inches) www.fcai.fujitsu.com
Specications
subject to change
IDC TOOLS
n FEATURES
• Special IDC tools are used to assemble FCN-700
series connectors and at cables.
• All tools are simple and easy to use, even for rst-
time users.
• Users who have IDC tools manufactured by us do
not have to buy hand presses or cutting cables.
They are compatible. Please buy the locator
plate designed for your connectors.
• The number of pins can be changed easily by
setting the connector guide to a specied pin
hole.
• The cable cutter remains sharp, giving fast, easy
cutting with a long life.
Notes: • Please ask for an operation instruction
manual if needed.
• If you have any questions about Fujitsu IDC
tools, please contact your local Fujitsu ofce
or your local Fujitsu distributor.
Hand press Cable cutter Locator plate
n CABLE TERMINATION
There are many ways to connect connectors to at
cables. Choose the best connection method for your
application from the gure below.
The orientation of a connector is important when you
specify polarity to prevent incorrect insertion of 700
series clip types.
Discrete wire insulation displacement connection is
possible, but cable assembly is not simple. Please
contact us for details.
The length of a cable is indicated in units of cm, as
shown in the gure below. The minimum length is 3 cm.
The specied tolerance of the cable length is ±10% for
L ≤ 10 cm (±5 mm min.), ±1 cm for 10 cm < L < 100 cm,
±(L/100 cm + 2 cm) for 100 cm ≤ L ≤ 1800 cm, and ±20
cm for 1800 cm < L.
700 series
707P series
n PART NUMBERS FOR IDC TOOLS
Cable cutter (common)
Hand press (common)
Locator plate 700 series socket
Locator plate 700 series plug (for 707P series)
Locator plate 700 series plug (for 707P series M6 type)
FCN-707T-T001/H
FCN-707T-T101/H
FCN-707T-T022/H
FCN-707T-T025/H
FCN-707T-T036/H
The hand press and the cable cutter can be used for other IDC connectors.
Dimensions are in millimeters (inches) www.fcai.fujitsu.com
Specications
subject to change
Fujitsu Component Limited
Gotanda-Chuo Building
3-5, Higashigotanda 2-chome, Shinagawa-ku
Tokyo 141, Japan
Tel: (81-3) 5449-7010
Fax: (81-3) 5449-2626
Email: promothq@ft.ed.fujitsu.com
Web: www.fcl.fujitsu.com
Fujitsu Components America, Inc.
250 E. Caribbean Drive
Sunnyvale, CA 94089 U.S.A.
Tel: (1-408) 745-4900
Fax: (1-408) 745-4970
Email: components@us.fujitsu.com
Web: http://www.fujitsu.com/us/services/edevices/components/
Fujitsu Components Europe B.V.
Diamantlaan 25
2132 WV Hoofddorp
Netherlands
Tel: (31-23) 5560910
Fax: (31-23) 5560950
Email: info@fceu.fujitsu.com
Web: emea.fujitsu.com/components/
Fujitsu Components Asia Ltd.
102E Pasir Panjang Road
#01-01 Citilink Warehouse Complex
Singapore 118529
Tel: (65) 6375-8560
Fax: (65) 6273-3021
Email: fcal@fcal.fujitsu.com
Web: http://www.fujitsu.com/sg/services/micro/components/
©2010 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the property of their respective
owners.
Fujitsu Components America or its afliates do not warrant that the content of datasheet is error free. In a continuing effort to improve our
products Fujitsu Components America, Inc. or its afliates reserve the right to change specications/datasheets without prior notice.
Rev. January 20, 2010.
