8018701020001101 - PRECI-DIP DURTAL SA

Staying tough at

the top

When it comes to professional connecting devices

with machined precision contacts (read: IC-

sockets, PCB connectors and allied products) you

can consider Preci-Dip as one of the top addresses

in the world.

Preci-Dip's skill and manufacturing experience,

combined with a strongly dedicated sales

organisation, offer you total security, all over the

world. Security in terms of quality. Of timely

deliveries. And last but not least: of price.

Play it safe and call the top address for your needs

of Sockets and Strips, of Carriers, PGAs and PCB

Connectors and of customized products – for

YOUR security and peace of mind.

Thanks to the highly automated precision machining division at the

Preci-Dip production plant, most Preci-Dip products come with

high quality machined contacts for additional safety and durability.

Machined precision contacts

Preci-Dip's contact technology for receptacles uses three, four or

six finger clips made of CuBe and housed in a machined brass

sleeve. Platings can be different for both parts, e.g. tin for the

sleeve, gold for the clip.

Contact clips are

produced on mod-

ern, high speed pre-

cision stamping

machines and insert-

ed – after plating of

both parts – into the

sleeve on fully auto-

matic assembly lines.

Receptacles made by

Preci-Dip are of

extremely good reli-

ability and have ex-

cellent performances

with respect to shock

and vibration, number of matings, contact resistance, etc...

One of the most important features, however, is the closed design

of the sleeve which makes it absolutely safe against flux wicking

during the soldering process.

Insertion diameter and contact point

Insertion diameter and contact point of the receptacles may vary

depending on contact type.

These relevant values are normally indicated on each catalog draw-

ing representing a receptacle:

– insertable pin diameter (0.40–0.56 mm) or

rectangle (0.25 ×0.45 mm) is shown on

top of part

– distance between contact point and upper

edge of receptacle (2.4 mm) is shown on

left side of part.

Male contacts

Male contacts have cylindrical, machined pins. In comparison to

pins with square or rectangular section, this provides for smoother

insertion/extraction with more constant forces, longer life and

higher reliability.

The terminations of machined contacts are rugged and accurately

positioned; bending of leads by inadvertance is almost excluded

which makes handling very easy.

Interconnect components

Machined pins are ideally suited for all kinds of board-to-board

interconnecting applications. Their ruggedness and precision are

major advantages when reliability and sturdiness of the mechanical

assembly are major requirements.

Interconnect contacts are available in a variety of different lengths

to suit a maximum number of applications.

They are mostly fitted to single or double row strip insulators but

they are also available on dual-in-line or other body styles.

The fact of these contacts being machined allows to manufacture

customer specific lengths with no or very little tooling cost.

Insulator bodies

Precision injection molded insulator bodies are made of temper-

ature resistant thermoplastic material, to withstand soldering heat

and climatic requirements. All the plastic materials used on

Preci-Dip products are UL 94-V0 rated.

Contact strips have a notched design. The insulators are thus easy

to cut to any length – in most cases without any loss of contact.

Carriers

Disposable insulators made of recycled plastic material with carrier

pins and plugged-on contacts are used on Preci-Dip's unique carri-

er sockets and strips.

These carriers are rugged and have the same rigidity and precision

as the standard sockets and strips. In comparison to flexible carrier

solution, Preci-Dip carriers are as easy to handle as normal preci-

sion sockets and strips.

All styles of insulator bodies including PGAs can be equipped for

carrier applications.

Products with stamped contacts

Some Preci-Dip product lines come with stamped contact versions.

Please refer to respective product pages for detailed information.

Technology infor-

mation

Technical specifications

Materials

– Insulator: Glass filled thermoplastic polyester, self extin-

guishing UL 94 V-0, colour black, resistant to mineral acids,

solvents, greases, oils (short time).

– Receptacle contact:

– Sleeve: Screw-machined brass (QQ-B-626), gold or tin-lead

plated (90/10) over 2–3 µm nickel

– Clip: Stamped beryllium-copper (QQ-C-533), gold or tin-

lead (90/10) plated over 2–3 µm nickel

– Pin contact: Screw-machined brass (QQ-B-626) or phosphor

bronze (QQ-B-750), gold or tin-lead plated (90/10) over

2–3 µm nickel

Series

850 830 800 300/400/

Mechanical data

700

– Insertion characteristics*

– Gauge diameter (mm): 0.43 0.46 0.76 0.46

(1 mm)

– Insertion force (N): 1.2 1 1.2 1.8

– Withdrawal force (N): 0.6 0.5 0.6 1

– Mechanical life: min. 500 cycles

* (measured with a polished steel gauge, typical values)

Electrical data

– Rated current (A): 1 3 3 1

– Rated voltage: 100 VRMS / 150 VDC

– Max contact

resistance (mΩ): 20 10 10 10

– Insulation resistance: 10 000 MΩmin.

– Dielectric strength: 1000 VRMS min.

– Air and creepage

distances (mm): 0.4/0.5 0.5 0.85/0.7 0.7

– Capacitance (pF): 1 1 1 0.8

Environmental data

– Operating temperature: –55/+125°C

– Vibration

(10–2000 Hz, 15 g): no electrical discontinuity > 1 µs

– Shock: (50 g): no electrical discontinuity > 1 µs

– Solderability

(IEC 68-2-54 Ta): 235°C, 5 s

– Resistance to soldering heat:

(IEC 68-2-20 Tb): 260°C, 5 s

– Resistance to atmospheric

corrosion: IEC 68-2-42 and 43

– Climatic category (IEC): 55/125/21

PCB connectors and

carriers

Series 850

PCB connectors 1.27 mm

Single row / double row / triple row

Solder tail

Ultraminiature PCB receptacles,

solder tail

Grid spacing 1.27×1.27 mm

Receptacle for pins

∅0.35–0.45 mm

For corresponding pin connectors see pages 13, 14 and 15

Ordering information

Replace xxx with the number of poles, e.g. 853-91-xxx-10-001

for a double row version with 8 pins per row becomes:

853-91-016-10-001

851-91-xxx-10-001

851-93-xxx-10-001

851-99-xxx-10-001

Straight receptacle: solder tail,

single row

Availability from: 1 to 50 contacts

Standard number of contacts 25

and 50

853-91-xxx-10-001

853-93-xxx-10-001

853-99-xxx-10-001

Straight receptacle: solder tail,

double row

Availability from: 4 to 100

contacts

Standard number of contacts 50

and 100

853-91-xxx-10-002

853-93-xxx-10-002

853-99-xxx-10-002

Straight receptacle: solder tail,

double row with 2.54 mm row to

row distance

Availability from: 4 to 100

contacts

Standard number of contacts 100

855-91-xxx-10-001

855-93-xxx-10-001

855-99-xxx-10-001

Straight receptacle: solder tail,

triple row

Availability from: 9 to 150

contacts

Standard number of contacts 150

Platings Sleeve Clip Pin

91 5 µm Sn Pb 0.25 µm Au

93 5 µm Sn Pb 0.75 µm Au

99 5 µm Sn Pb 5 µm Sn Pb

Series 850

PCB connectors 1.27 mm

Single row / double row / triple row

Solder tail

Ultraminiature PCB receptacles,

solder tail

Grid spacing 1.27×1.27 mm

Receptacle for pins

∅0.35–0.45 mm

For corresponding pin connectors see pages 13, 14 and 15

Ordering information

Replace xxx with the number of poles, e.g. 853-91-xxx-20-001

for a double row version with 8 pins per row becomes:

853-91-016-20-001

851-91-xxx-20-001

851-93-xxx-20-001

851-99-xxx-20-001

Right angle receptacle: solder tail,

single row

Availability from: 1 to 50 contacts

Standard number of contacts 25

and 50

853-91-xxx-20-001

853-93-xxx-20-001

853-99-xxx-20-001

Right angle receptacle: solder tail,

double row

Availability from: 4 to 100

contacts

Standard number of contacts 50

and 100

853-91-xxx-20-002

853-93-xxx-20-002

853-99-xxx-20-002

Right angle receptacle: solder tail,

double row with 2.54 mm row to

row distance

Availability from: 4 to 100

contacts

Standard number of contacts 100

855-91-xxx-20-001

855-93-xxx-20-001

855-99-xxx-20-001

Right angle receptacle: solder tail,

triple row

Availability from: 6 to 150

contacts

Standard number of contacts 150

Platings Sleeve Clip Pin

91 5 µm Sn Pb 0.25 µm Au

93 5 µm Sn Pb 0.75 µm Au

99 5 µm Sn Pb 5 µm Sn Pb

Series 850

PCB connectors 1.27 mm

Single row / double row

Surface mount

Ultraminiature PCB receptacles,

surface mount

Grid spacing 1.27×1.27 mm

Receptacles for pins ∅0.35–0.45 mm

For corresponding connectors see pages 13, 14 and 15

Ordering information

Replace xxx with the number of poles, e.g. 853-91-xxx-30-001

for a double row version with 8 pins per row becomes:

853-91-016-30-001

851-91-xxx-40-001

851-93-xxx-40-001

851-99-xxx-40-001

SMD receptacle: single row,

parallel mount

Availability from: 1 to 50 contacts

Standard number of contacts 25

and 50

851-91-xxx-30-001

851-93-xxx-30-001

851-99-xxx-30-001

SMD receptacle: single row,

perpendicular mount

Availability from: 3 to 50 contacts

Standard number of contacts

single row: 25 and 50

853-91-xxx-30-001

853-93-xxx-30-001

853-99-xxx-30-001

SMD receptacle: double row,

perpendicular mount

Availability from: 4 to 100

contacts

Standard number of contacts 50

and 100

853-91-xxx-30-002

853-93-xxx-30-002

853-99-xxx-30-002

SMD receptacle: double row with

2.54 mm distance, perpendicular

row to row mount

Availability from: 4 to 100

contacts

Standard number of contacts 100

On request with positioning pins

Platings Sleeve Clip Pin

91 5 µm Sn Pb 0.25 µm Au

93 5 µm Sn Pb 0.75 µm Au

99 5 µm Sn Pb 5 µm Sn Pb

Series 850

PCB connectors 1.27 mm

Single row / double row / triple row

Solder tail

Ultraminiature PCB

pin connectors, solder tail

Grid spacing 1.27×1.27 mm

Screw-machined pin ∅0.43 mm

For corresponding receptacles see pages 10, 11 and 12

Ordering information

Replace xxx with the number of poles, e.g. 852-10-xxx-10-001

for a double row version with 8 pins per row becomes:

852-10-016-10-001

850-10-xxx-10-001

850-90-xxx-10-001 Straight pin connector: solder

tail, single row

Availability from: 1 to 50 contacts

Standard number of contacts 25

and 50

852-10-xxx-10-001

852-90-xxx-10-001 Straight pin connector: solder

tail, double row

Availability from: 4 to 100

contacts

Standard number of contacts 50

and 100

852-10-xxx-10-002

852-90-xxx-10-002 Straight pin connector: solder

tail, double row with 2.54 mm

row to row distance

Availability from: 4 to 100

contacts

Standard number of contacts 100

854-10-xxx-10-001

854-90-xxx-10-001 Straight pin connector: solder

tail, triple row

Availability from: 9 to 150

contacts

Standard number of contacts 150

Platings Sleeve Clip Pin

10 0.25 µm Au

90 5 µm Sn Pb

Series 850

PCB connectors 1.27 mm

Single row / double row / triple row

Solder tail

Ultraminiature PCB

pin connectors, solder tail

Grid spacing 1.27×1.27 mm

Screw-machined pin ∅0.43 mm

For corresponding receptacles see pages 10, 11 and 12

Ordering information

Replace xxx with the number of poles, e.g. 852-10-xxx-20-001

for a double row version with 8 pins per row becomes:

852-10-016-20-001

850-10-xxx-20-001

850-90-xxx-20-001 Right angle pin connector: solder

tail, single row

Availability from: 1 to 50 contacts

Standard number of contacts 25

and 50

852-10-xxx-20-001

852-90-xxx-20-001 Right angle pin connector: solder

tail, double row

Availability from: 4 to 100

contacts

Standard number of contacts 50

and 100

852-10-xxx-20-002

852-90-xxx-20-002 Right angle pin connector: solder

tail, double row with 2.54 mm

row to row distance

Availability from: 4 to 100

contacts

Standard number of contacts 100

854-10-xxx-20-001

854-90-xxx-20-001 Right angle pin connector: solder

tail, triple row

Availability from: 6 to 150

contacts

Standard number of contacts 150

Platings Sleeve Clip Pin

10 0.25 µm Au

90 5 µm Sn Pb

Series 850

PCB connectors 1.27 mm

Single row / double row

Surface mount

Ultraminiature PCB pin connectors,

surface mount

Grid spacing 1.27×1.27 mm

Pin connectors with screw-machined pin ∅0.43 mm

For corresponding connectors see pages 10, 11 and 12

Ordering information

Replace xxx with the number of poles, e.g. 852-10-xxx-30-001

for a double row version with 8 pins per row becomes:

852-10-016-30-001

850-10-xxx-40-001

850-90-xxx-40-001 SMD pin connector: single row,

parallel mount

Availability from: 1 to 50 contacts

Standard number of contacts 25

and 50

850-10-xxx-30-001

850-90-xxx-30-001 SMD pin connector: single and

double row, perpendicular mount

Availability from: 3 to 50 contacts

Standard number of contacts 25

and 50

852-10-xxx-30-001

852-90-xxx-30-001 SMD pin connector: double row,

perpendicular mount

Availability from: 4 to 100

contacts

Standard number of contacts 50

and 100

852-10-xxx-30-002

852-90-xxx-30-002 SMD pin connector: double row

with 2.54 mm row to row

distance, perpendicular mount

Availability from: 4 to 100

contacts

Standard number of contacts 100

On request with positioning pins

Platings Sleeve Clip Pin

10 0.25 µm Au

90 5 µm Sn Pb

Operating principle:

The electrical connection is made from the moving, spring actuated pin or plunger ➀to the

fixed wiring end of the connector ➁by a multifinger sliding contact ➂. The moving contact pin

is actuated by a compression spring ➃assuring pressure against the fixed contact counterpart ➄.

Parts ➀to ➃are fixed together by the plastic connector housing ➅. Standar d wiring is for PCB

through hole soldering, but SMD version will be available.

Product information

CONNECTOR WITH SPRING LOADED CONTACTS

Preci-Dip is introducing a new type of contact that can be proposed for connectors with very

high cycle count in the range of 10 000 or more. The electrical connection is made with a spring

loaded contact pin that is pressed against a fixed plate. The basic design is made to be easily

adapted to various requirements of contact force and stroke, contact pitch and height of the

connector.

Two different contact types are currently available:

■the original design for small pitch implementation down to 1.25 mm, and with solder tail

■a “very-low-profile” design with about 4.5 mm height with a working stroke of about 1mm;

the min pitch is 2.54 mm and SMD termination.

Typical field of application:

■mobile phone, radio telephone and other portable telecom equipment

■battery loader for appliance, audio and video equipment

■portable computer (note book) and portable data acquisition and processing equipment

■test equipment.

Availability:

Samples for evaluation and functional tests available now.

Custom specific connector with new housing and/or particular connection side, but with the

standard contact elements, please consult.

Contact with other specifications like stroke/force characteristics or electrical values on request.

Operating Non operating

Series 317 / 350

PCB connectors 1.778 and 1.8 mm

Single row

Solder tail

Receptacles and pin connectors, solder tail

With reduced grid spacing 1.778 and 1.8 mm

Ordering information

Replace xx with the number of poles, e.g. 317-91-1xx-41-005

for a single row version with 8 contacts per row becomes:

317-91-108-41-005

317-91-1xx-41-005

317-93-1xx-41-005

317-97-1xx-41-005

317-99-1xx-41-005

Straight receptacle: single row,

accepts pin ∅0.40–0.56 mm,

grid spacing 1.778 mm

Availability from: 1 to 38 contacts

Standard number of contacts 21

and 38

350-10-1xx-00-012

350-90-1xx-00-012 Straight pin connector: single

row, grid spacing 1.778 mm,

screw-machined pin ∅0.47 mm

Availability from: 1 to 38 contacts

Standard number of contacts 21

and 38

Platings Sleeve Clip Pin

91 5 µm Sn Pb 0,25 µm Au

93 5 µm Sn Pb 0,75 µm Au

97 5 µm Sn Pb Goldflash

99 5 µm Sn Pb 5 µm Sn Pb

10 0,25 µm Au

90 5 µm Sn Pb

317-91-1xx-01-687

317-93-1xx-01-687

317-99-1xx-01-687

Straight receptacle: single row,

accepts pin ∅0.40–0.56 mm,

grid spacing 1.8 mm for LCD-

displays

Availability from: 1 to 42 contacts

Standard number of contacts 42

Series 830

PCB connectors 2.0 mm

Single row / double row

Solder tail

“Hard metric” PCB receptacles

solder tail

Grid spacing 2.0×2.0 mm

Receptacle for pins

∅0.40–0.56 mm

For corresponding pin connectors see pages 19 and 20

Ordering information

Replace xxx with the number of poles, e.g. 833-93-xxx-10-001

for a double row version with 8 pins per row becomes:

833-93-016-10-001

831-91-xxx-10-001

831-93-xxx-10-001

831-99-xxx-10-001

Straight receptacle: solder tail,

single row

Availability from: 1 to 50 contacts

Standard number of contacts 50

833-91-xxx-10-001

833-93-xxx-10-001

833-99-xxx-10-001

Straight receptacle: solder tail,

double row

Availability from: 4 to 100

contacts

Standard number of contacts 100

831-91-xxx-20-001

831-93-xxx-20-001

831-99-xxx-20-001

Right angle receptacle: solder tail,

single row

Availability from:1 to 50 contacts

Standard number of contacts 50

833-91-xxx-20-001

833-93-xxx-20-001

833-99-xxx-20-001

Right angle receptacle: solder tail,

double row

Availability from: 4 to 100

contacts

Standard number of contacts 100

Platings Sleeve Clip Pin

91 5 µm Sn Pb 0.25 µm Au

93 5 µm Sn Pb 0.75 µm Au

99 5 µm Sn Pb 5 µm Sn Pb

Series 830

PCB connectors 2.0 mm

Single row / double row

Solder tail

“Hard metric”

PCB pin connectors, solder tail

Grid spacing 2.0×2.0 mm

Screw-machined pins

∅0.46–0.47 mm

For corresponding receptacles see pages 18, 20 and 21

Ordering information

Replace xxx with the number of poles, e.g. 832-10-xxx-20-001

for a double row version with 8 pins per row becomes:

832-10-016-20-001

830-10-xxx-10-001

830-90-xxx-10-001 Straight pin connector: solder

tail, single row

Availability from: 1 to 50 contacts

Standard number of contacts 50

832-10-xxx-10-001

832-90-xxx-10-001 Straight pin connector: solder

tail, double row

Availability from: 4 to 100

contacts

Standard number of contacts 100

830-10-xxx-20-001

830-90-xxx-20-001 Right angle pin connector: solder

tail, single row

Availability from: 1 to 50 contacts

Standard number of contacts 50

832-10-xxx-20-001

832-90-xxx-20-001 Right angle pin connector: solder

tail, double row

Availability from: 4 to 100

contacts

Standard number of contacts 100

Platings Sleeve Clip Pin

10 0.25 µm Au

90 5 µm Sn Pb

831-91-xxx-30-001

831-93-xxx-30-001

831-99-xxx-30-001

SMD receptacle: single row,

perpendicular mount

Availability from: 3 to 50 contacts

Standard number of contacts 50

833-91-xxx-30-001

833-93-xxx-30-001

833-99-xxx-30-001

SMD receptacle: double row,

perpendicular mount

Availability from: 4 to 100

contacts

Standard number of contacts 100

Series 830

PCB connectors 2.0 mm

Single row / double row

Surface mount

“Hard metric” PCB receptacles

and pin connectors, surface mount

Grid spacing 2.0×2.0 mm

Receptacles for pins

∅0.40–0.56 mm

Screw machined pins ∅0.46–0.47 mm

For corresponding connectors see pages 18, 19 and 21

Ordering information

Replace xxx with the number of poles, e.g. 833-91-xxx-30-001

for a double row version with 8 pins per row becomes:

833-91-016-30-001

830-10-xxx-30-001

830-90-xxx-30-001 SMD pin connector: single row,

perpendicular mount

Availability from: 3 to 50 contacts

Standard number of contacts 50

832-10-xxx-30-001

832-90-xxx-30-001 SMD pin connector: double row,

perpendicular mount

Availability from: 4 to 100

contacts

Standard number of contacts 100

Platings Sleeve Clip Pin

10 0.25 µm Au

90 5 µm Sn Pb

91 5 µm Sn Pb 0.25 µm Au

93 5 µm Sn Pb 0.75 µm Au

99 5 µm Sn Pb 5 µm Sn Pb

Series 830

PCB connectors 2.0 mm

Single row / double row

Press-fit

“Hard metric” PCB receptacles press-fit

Grid spacing 2.0×2.0 mm

Receptacle for pins

∅0.40–0.56 mm

For solderless mount into PCB with 1.5–2.4 mm thickness for

plated thru-holes ∅0.71±0.06 mm

For corresponding pin connectors see pages 19 and 20

Ordering information

Replace xxx with the number of poles, e.g. 833-93-xxx-64-001

for a double row version with 8 pins per row becomes:

833-93-016-64-001

831-91-xxx-64-001

831-93-xxx-64-001

831-99-xxx-64-001

Straight receptacle: press-fit,

single row

Availability from: 1 to 50 contacts

Standard number of contacts 50

833-91-xxx-64-001

833-93-xxx-64-001

833-99-xxx-64-001

Straight receptacle: press-fit,

double row

Availability from: 4 to 100

contacts

Standard number of contacts 100

Platings Sleeve Clip Pin

91 5 µm Sn Pb 0.25 µm Au

93 5 µm Sn Pb 0.75 µm Au

99 5 µm Sn Pb 5 µm Sn Pb

Series 800

PCB connectors 2.54 mm

Single row / double row / triple row

Solder tail

Receptacles, solder tail

Accept square pins ■■0.635 mm

and round pins ∅0.70–0.80 mm

For corresponding pin connectors see

pages 30 to 35

Ordering information

Replace xxx with the number of poles, e.g. 803-91-xxx-10-001

for a double row version with 8 pins per row becomes:

803-91-016-10-001

801-91-xxx-10-001

801-93-xxx-10-001

801-99-xxx-10-001

Straight receptacle: solder tail,

single row

Availability from: 1 to 50 contacts

Standard number of contacts 24,

28, 29, 30, 36, 42, 48, 50

Option

On request with clinched

(right/left) solder tails

803-91-xxx-10-001

803-93-xxx-10-001

803-99-xxx-10-001

Straight receptacle: solder tail,

double row

Availability from: 4 to 100

contacts

Standard number of contacts 72

and 100

805-91-xxx-10-001

805-93-xxx-10-001

805-99-xxx-10-001

Straight receptacle: solder tail,

triple row

Availability from: 9 to 96 contacts

Standard number of contacts 96

Platings Sleeve Clip Pin

91 5 µm Sn Pb 0.25 µm Au

93 5 µm Sn Pb 0.75 µm Au

99 5 µm Sn Pb 5 µm Sn Pb

Series 800

PCB connectors 2.54 mm

Single row / double row / triple row

Solder tail

Receptacles, solder tail

Accept square pins ■■0.635 mm

and round pins ∅0.70–0.80 mm

For corresponding pin connectors see

pages 30 to 35

Ordering information

Replace xxx with the number of poles, e.g. 803-91-xxx-10-012

for a double row version with 8 pins per row becomes:

803-91-016-10-012

801-91-xxx-10-002

801-93-xxx-10-002

801-99-xxx-10-002

801-91-xxx-10-012

801-93-xxx-10-012

801-99-xxx-10-012

Straight receptacle: solder tail,

single row, low profile

h = 4.2 mm

…-002: Availability from: 1 to 64

contacts

Standard number of contacts 64

…-012: Availability from: 1 to 32

contacts

Standard number of contacts 14,

20 and 32

803-91-xxx-10-002

803-93-xxx-10-002

803-99-xxx-10-002

803-91-xxx-10-012

803-93-xxx-10-012

803-99-xxx-10-012

Straight receptacle: solder tail,

double row, low profile

h = 4.2 mm

…-002: Availability from: 4 to 72

contacts

Standard number of contacts 40,

44, 56, 64 and 72

…-012: Availability from: 4 to 64

contacts

Standard number of contacts 64

805-91-xxx-10-012

805-93-xxx-10-012

805-99-xxx-10-012

Straight receptacle: solder tail,

triple row, low profile

h = 4.2 mm

Availability from: 9 to 96 contacts

Standard number of contacts 96

Platings Sleeve Clip Pin

91 5 µm Sn Pb 0.25 µm Au

93 5 µm Sn Pb 0.75 µm Au

99 5 µm Sn Pb 5 µm Sn Pb

Products not available from stock. Please consult PRECI-DIP.

Series 800

PCB connectors 2.54 mm

Single row / double row

Solder tail

Receptacles, solder tail

Accept square pins ■■0.635 mm

and round pins ∅0.70–0.80 mm

For corresponding pin connectors see pages 30 to 35

Ordering information

Replace xxx with the number of poles, e.g. 803-91-xxx-10-003

for a double row version with 8 pins per row becomes:

803-91-016-10-003

Option:

Triple row on request

801-91-xxx-10-003

801-93-xxx-10-003

801-99-xxx-10-003

Straight receptacle height 8 mm:

solder tail, single row

Availability from: 1 to 36 contacts

Standard number of contacts 36

803-91-xxx-10-003

803-93-xxx-10-003

803-99-xxx-10-003

Straight receptacle height 8 mm:

solder tail, double row

Availability from: 4 to 100

contacts

Standard number of contacts 72

and 100

801-91-xxx-10-005

801-93-xxx-10-005

801-99-xxx-10-005

Straight receptacle height

8.5 mm: solder tail, single row

Availability from: 1 to 36 contacts

Standard number of contacts 36

803-91-xxx-10-005

803-93-xxx-10-005

803-99-xxx-10-005

Straight receptacle height

8.5 mm: solder tail, double row

Availability from: 4 to 100

contacts

Standard number of contacts 100

Platings Sleeve Clip Pin

91 5 µm Sn Pb 0.25 µm Au

93 5 µm Sn Pb 0.75 µm Au

99 5 µm Sn Pb 5 µm Sn Pb

Series 800

PCB connectors 2.54 mm

Single row / double row

Solder tail

Right angle receptacles,

solder tail

Receptacles accept square

pins ■■0.635 mm

and round pins ∅0.70–0.80 mm

For corresponding receptacle connectors see pages 30 to 35

Ordering information

Replace xxx with the number of poles, e.g. 803-91-xxx-20-001

for a double row version with 8 pins per row becomes:

803-91-016-20-001

Option:

Triple row right angle receptacles on request

801-91-xxx-20-001

801-93-xxx-20-001

801-99-xxx-20-001

Right angle receptacle: solder tail,

single row

Availability from: 1 to 50 contacts

Standard number of contacts 24,

28, 29, 30, 36, 42, 48, 50

803-91-xxx-20-001

803-93-xxx-20-001

803-99-xxx-20-001

Right angle receptacle: solder tail,

double row

Availability from: 4 to 100

contacts

Standard number of contacts 72

and 100

801-91-xxx-20-002

801-93-xxx-20-002

801-99-xxx-20-002

Right angle short receptacle:

solder tail, single row

Availability from: 1 to 64 contacts

Standard number of contacts:

Right angle short receptacle:

solder tail, double row available

on request

Please consult

Platings Sleeve Clip Pin

91 5 µm Sn Pb 0.25 µm Au

93 5 µm Sn Pb 0.75 µm Au

99 5 µm Sn Pb 5 µm Sn Pb

Series 800

PCB connectors 2.54 mm

Single row / double row

Surface mount

Receptacles, surface mount

Accept square pins ■■0.635 mm

and round pins ∅0.70–0.80 mm

For corresponding pin connectors see

pages 30 to 35

Ordering information

Replace xxx with the number of poles, e.g. 803-91-xxx-30-001

for a double row version with 8 pins per row becomes:

803-91-016-30-001

801-91-xxx-30-001

801-93-xxx-30-001

801-99-xxx-30-001

SMD receptacle: single row

perpendicular mount

Availability from: 3 to 50 contacts

Standard number of contacts 24,

28, 29, 30, 36, 42, 48 and 50

803-91-xxx-30-001

803-93-xxx-30-001

803-99-xxx-30-001

SMD receptacle: double row

perpendicular mount

Availability from: 4 to 100

contacts

Standard number of contacts 72

and 100

801-91-xxx-30-002

801-93-xxx-30-002

801-99-xxx-30-002

SMD receptacle: single row, low

profile, perpendicular mount

Availability from: 3 to 32 contacts

Standard number of contacts 32

803-91-xxx-30-002

803-93-xxx-30-002

803-99-xxx-30-002

SMD receptacle: double row, low

profile, perpendicular mount

Availability from: 4 to 72 contacts

Standard number of contacts 40,

44, 56, 64 and 72

Platings Sleeve Clip Pin

91 5 µm Sn Pb 0.25 µm Au

93 5 µm Sn Pb 0.75 µm Au

99 5 µm Sn Pb 5 µm Sn Pb

Series 800

PCB connectors 2.54 mm

Single row / double row / surface mount

Receptacles, surface mount

Accept square pins ■■0.635 mm

and round pins ∅0.70–0.80 mm

For corresponding pin connectors see

pages 30 to 35

Ordering information

Replace xxx with the number of poles, e.g. 803-91-xxx-40-001

for a double row version with 8 pins per row becomes:

803-91-016-40-001

801-91-xxx-40-001

801-93-xxx-40-001

801-99-xxx-40-001

SMD receptacle: single row

parallel mount

Availability from: 1 to 50 contacts

Standard number of contacts 24,

28, 29, 30, 36, 42, 48 and 50

801-91-xxx-40-002

801-93-xxx-40-002

801-99-xxx-40-002

SMD receptacle: single row, low

profile, parallel mount

Availability from: 1 to 32 contacts

Standard number of contacts 32

Platings Sleeve Clip Pin

91 5 µm Sn Pb 0.25 µm Au

93 5 µm Sn Pb 0.75 µm Au

99 5 µm Sn Pb 5 µm Sn Pb

Series 800

PCB connectors 2.54 mm

Single row / double row

Press-fit

Receptacles connectors, press-fit

Receptacles accept square pins

■■0.635 mm, and round pins ∅0.70–0.80 mm

With compliant pin for solderless mount into PCB

plated-thru holes ∅1 mm +0.09/–0.06 mm

For corresponding connectors see pages 30 to 35

New version with modified eye of the needle pin

Ordering information

Replace xxx with the number of poles, e.g. 803-93-xxx-65-001

for a double row version with 8 pins per row becomes:

803-93-016-65-001

(Older versions 801/803-..-...-61/62/63-001 please consult)

for PCB thickness 1.5 to

2.0 mm D = 2.80 mm

801-91-xxx-65-001

801-93-xxx-65-001

801-99-xxx-65-001

for PCB thickness 2.1 to

3.2 mm D = 3.80 mm

801-91-xxx-66-001

801-93-xxx-66-001

801-99-xxx-66-001

Press-fit receptacle: single row

Availability from: 1 to 50 contacts

Standard number of contacts 24,

28, 29, 30, 36, 42, 48, 50

New version with modified eye of

the needle pin

for PCB thickness 1.5 to

2.0 mm D = 2.80 mm

803-91-xxx-65-001

803-93-xxx-65-001

803-99-xxx-65-001

for PCB thickness 2.1 to

3.2 mm D = 3.80 mm

803-91-xxx-66-001

803-93-xxx-66-001

803-99-xxx-66-001

Press-fit receptacle: double row

Availability from: 4 to 100

contacts

Standard number of contacts 72

and 100

New version with modified eye of

the needle pin

Platings Sleeve Clip Pin

91 5 µm Sn Pb 0.25 µm Au

93 5 µm Sn Pb 0.75 µm Au

99 5 µm Sn Pb 5 µm Sn Pb

Series 800

PCB connectors 2.54 mm

Single row / double row

Wire-wrap / solder tail

PCB receptacles with wire-wrap posts

Accept square pins ■■0.635 mm

and round pins ∅0.70–0.80 mm

For corresponding pin connectors see pages

30 to 35

Receptacles, solder tail

for pins ∅0.95–1.05 mm

Ordering information

Replace xxx with the number of poles, e.g. 803-91-xxx-10-004

for a double row version with 8 pins per row becomes:

803-91-016-10-004

801-91-xxx-10-004

801-93-xxx-10-004

801-99-xxx-10-004

Straight receptacle: single row,

accepts pin

∅0.95–1.05 mm

Availability from: 1 to 50 contacts

Standard number of contacts 24,

28, 29, 30, 36, 42, 48, 50

803-91-xxx-10-004

803-93-xxx-10-004

803-99-xxx-10-004

Straight receptacle: double row,

accepts pin

∅0.95–1.05 mm

Availability from: 4 to 100

contacts

Standard number of contacts 72

and 100

Platings Sleeve Clip Pin

91 5 µm Sn Pb 0.25 µm Au

93 5 µm Sn Pb 0.75 µm Au

99 5 µm Sn Pb 5 µm Sn Pb

801-91-xxx-53-001

801-93-xxx-53-001 Wire-wrap receptacle: single row,

3 levels

Availability from: 1 to 50 contacts

Standard number of contacts 24,

28, 29, 30, 36, 42, 48, 50

803-91-xxx-53-001

803-93-xxx-53-001 Wire-wrap receptacle: double

row, 3 levels

Availability from: 4 to 100

contacts

Standard number of contacts 72

and 100

Products not available from stock. Please consult PRECI-DIP.

Series 800

PCB connectors 2.54 mm

Single row / double row

Solder tail

Pin connectors, solder tail

Screw-machined pins ∅0.76 mm

For corresponding receptacles see pages 22 to 29

New:

Pin connectors with selective plated precision screw machined

pin, plating code Z1.

Connecting side 1: gold plated

soldering/PCB side 2: tin plated

Ordering information

Replace xx with the number of poles, e.g. 802-10-0xx-10-001

for a double row version with 8 pins per row becomes:

802-10-016-10-001

800-10-0xx-10-001

800-90-0xx-10-001

800-Z1-0xx-10-001

Straight pin connector: solder

tail, single row

Availability from: 1 to 64 contacts

Standard number of contacts 5,

6, 8, 10, 14, 16, 20, 21, 25, 30,

32, 48, 56, 60, 64

Option

On request with clinched

(right/left) solder tails

802-10-0xx-10-001

802-90-0xx-10-001

802-Z1-0xx-10-001

Straight pin connector: solder

tail, double row

Availability from: 4 to 72 contacts

Standard number of contacts 40,

44, 56, 64, 72

800-10-0xx-10-002

800-90-0xx-10-002

800-Z1-0xx-10-002

Straight pin connector: solder

tail, single row, short pin

Availability from: 1 to 64 contacts

Standard number of contacts 5,

6, 8, 10, 14, 16, 20, 21, 25, 30,

32, 48, 56, 60, 64

Option

On request with clinched

(right/left) solder tails

802-10-0xx-10-002

802-90-0xx-10-002

802-Z1-0xx-10-002

Straight pin connector: solder

tail, double row, short pin

Availability from: 4 to 72 contacts

Standard number of contacts 40,

44, 56, 64, 72

Platings Sleeve Clip Pin

10 0.25 µm Au

90 5 µm Sn Pb

Z1 1: 0.25 µm Au

2: 5 µm Sn Pb

Series 800

PCB connectors 2.54 mm

Single row / double row

Solder tail

Right angle pin connectors, solder tail

Screw-machined pins ∅0.76 mm

For corresponding receptacles see pages 22 to 29

New:

Pin connectors with selective plated precision screw machined

pin, plating code Z1.

Connecting side 1: gold plated

soldering/PCB side 2: tin plated

Ordering information

Replace xx with the number of poles, e.g. 802-10-0xx-20-001

for a double row version with 8 pins per row becomes:

802-10-016-20-001

800-10-0xx-20-001

800-90-0xx-20-001

800-Z1-0xx-20-001

Right angle pin connector: solder

tail, single row

Availability from: 1 to 64 contacts

Standard number of contacts 5,

6, 8, 10, 14, 16, 20, 21, 25, 30,

32, 48, 56, 60, 64

802-10-0xx-20-001

802-90-0xx-20-001

802-Z1-0xx-20-001

Right angle pin connector: solder

tail, double row

Availability from: 4 to 72 contacts

Standard number of contacts 40,

44, 56, 64, 72

Platings Sleeve Clip Pin

10 0.25 µm Au

90 5 µm Sn Pb

Z1 1: 0.25 µm Au

2: 5 µm Sn Pb

Series 800

PCB connectors 2.54 mm

Single row / double row

Surface mount

Pin connectors, surface mount

Screw-machined pins ∅0.76 mm

For corresponding receptacles see

pages 22 to 29

New:

Pin connectors with selective plated precision screw machined

pin, plating code Z1.

Connecting side 1: gold plated

soldering/PCB side 2: tin plated

Ordering information

Replace xx with the number of poles, e.g. 802-10-0xx-30-001

for a double row version with 8 pins per row becomes:

802-10-016-30-001

800-10-0xx-30-001

800-90-0xx-30-001

800-Z1-0xx-30-001

SMD pin connector: single row,

perpendicular mount

Availability from: 3 to 64 contacts

Standard number of contacts 5,

6, 8, 10, 14, 16, 20, 21, 25, 30,

32, 48, 56, 60, 64

802-10-0xx-30-001

802-90-0xx-30-001

802-Z1-0xx-30-001

SMD pin connector: double row,

perpendicular mount

Availability from: 4 to 72 contacts

Standard number of contacts 40,

44, 56, 64, 72

800-10-0xx-40-001

800-90-0xx-40-001

800-Z1-0xx-40-001

SMD pin connector: single row,

parallel mount

Availability from: 2 to 64 contacts

Standard number of contacts 5,

6, 8, 10, 14, 16, 20, 21, 25, 30,

32, 48, 56, 60, 64

Platings Sleeve Clip Pin

10 0.25 µm Au

90 5 µm Sn Pb

Z1 1: 0.25 µm Au

2: 5 µm Sn Pb

Series 800

PCB connectors 2.54 mm

Single row / double row

Press-fit

Pin connectors, press-fit

Pin connectors with screw-machined

pin ∅0.76 mm

With compliant pin for solderless mount into PCB

plated-thru holes ∅1 mm +0.09/–0.06 mm

For corresponding connectors see pages 22 to 29

New version with modified eye of the needle pin

Ordering information

Replace xxx with the number of poles, e.g. 802-10-xxx-65-001

for a double row version with 8 pins per row becomes:

802-10-016-65-001

(Older versions 800/802-..-...-61/62-001 please consult)

for PCB thickness 1.5 to

2.0 mm D = 2.80 mm

800-10-xxx-65-001

800-90-xxx-65-001

for PCB thickness 2.1 to

3.2 mm D = 3.80 mm

800-10-xxx-66-001

800-90-xxx-66-001

Press-fit pin connector: single

row

Availability from: 1 to 64 contacts

Standard number of contacts 5,

6, 8, 10, 14, 16, 20, 21, 25, 30,

32, 48, 56, 60, 64

New version with modified eye of

the needle pin

for PCB thickness 1.5 to

2.0 mm D = 2.80 mm

802-10-xxx-65-001

802-90-xxx-65-001

for PCB thickness 2.1 to

3.2 mm D = 3.80 mm

802-10-xxx-66-001

802-90-xxx-66-001

Press-fit pin connector: double

row

Availability from: 4 to 72 contacts

Standard number of contacts 40,

44, 56, 64, 72

New version with modified eye of

the needle pin

Platings Sleeve Clip Pin

10 0.25 µm Au

90 5 µm Sn Pb

Series 890 / 892

PCB connectors 2.54 mm

Single row / double row

Solder tail

Series 890 / 892 square

pin headers are cost effi-

cient thanks to selective

gold plating on pins made

of copper alloy

They come with various

pin lengths to suit many

different applications

When used with series

999 female jumpers,

these connectors may

serve as a practical, sim-

ple means for coding pur-

poses

For corresponding recept-

acles see pages 22 to 29

Platings Sleeve Clip Pin

19 0.25 µm Au/Sn Pb*

39 0.75 µm Au/Sn Pb*

90 Sn Pb

* selective

Ordering information

Replace xxx with required number of poles, e.g.

892-39-xxx-10-802 for a double row version with 12 pins per

row becomes: 892-39-024-10-802

Availability:

single row: 1 to 36 contacts, standard 36 contacts

double row: 4 to 72 contacts, standard 72 contacts

Order Codes Dimensions

Plating 19 Plating 39 Plating 90 Solder side Connector side Total lenght Min. length of

B±0.2 A±0.2 C±0.1 gold plating G

Single row

890-19-xxx-10-802 890-39-xxx-10-802 890-90-xxx-10-802 2.56 5.7 10.8 4.5

890-19-xxx-10-809 890-39-xxx-10-809 890-90-xxx-10-809 2.46 8.5 13.5 7.3

890-19-xxx-10-803 890-39-xxx-10-803 890-90-xxx-10-803 2.96 5.8 11.3 4.6

890-19-xxx-10-000 890-39-xxx-10-000 890-90-xxx-10-000 2.96 7.0 12.5 5.8

890-19-xxx-10-800 890-39-xxx-10-800 890-90-xxx-10-800 3.26 6.7 12.5 5.5

890-19-xxx-10-804 890-39-xxx-10-804 890-90-xxx-10-804 3.46 5.8 11.8 4.6

890-19-xxx-10-811 890-39-xxx-10-811 890-90-xxx-10-811 3.06 15.4 21.0 14.2

890-19-xxx-10-805 890-39-xxx-10-805 890-90-xxx-10-805 4.96 6.0 13.5 4.8

890-19-xxx-10-807 890-39-xxx-10-807 890-90-xxx-10-807 10.06 5.7 18.3 4.5

890-19-xxx-10-808 890-39-xxx-10-808 890-90-xxx-10-808 12.76 5.7 21.0 4.5

Double row

892-19-xxx-10-802 892-39-xxx-10-802 892-90-xxx-10-802 2.56 5.7 10.8 4.5

892-19-xxx-10-809 892-39-xxx-10-809 892-90-xxx-10-809 2.46 8.5 13.5 7.3

892-19-xxx-10-803 892-39-xxx-10-803 892-90-xxx-10-803 2.96 5.8 11.3 4.6

892-19-xxx-10-000 892-39-xxx-10-000 892-90-xxx-10-000 2.96 7.0 12.5 5.8

892-19-xxx-10-800 892-39-xxx-10-800 892-90-xxx-10-800 3.26 6.7 12.5 5.5

892-19-xxx-10-804 892-39-xxx-10-804 892-90-xxx-10-804 3.46 5.8 11.8 4.6

892-19-xxx-10-811 892-39-xxx-10-811 892-90-xxx-10-811 3.06 15.4 21.0 14.2

892-19-xxx-10-805 892-39-xxx-10-805 892-90-xxx-10-805 4.96 6.0 13.5 4.8

892-19-xxx-10-807 892-39-xxx-10-807 892-90-xxx-10-807 10.06 5.7 18.3 4.5

892-19-xxx-10-808 892-39-xxx-10-808 892-90-xxx-10-808 12.76 5.7 21.0 4.5

Products not available from stock. Please consult PRECI-DIP.

Series 890 / 892

PCB connectors 2.54 mm

Single row / double row

Solder tail

Series 890/892 square pin

headers are cost efficient

thanks to selective gold

plating on pins made of

copper alloy

They come with various

pin lengths to suit many

different applications

When used with series

999 female jumpers,

these connectors may

serve as a practical, sim-

ple means for coding pur-

poses

For corresponding recept-

acles see pages 22 to 29

Platings Sleeve Clip Pin

19 0.25 µm Au/Sn Pb*

39 0.75 µm Au/Sn Pb*

90 Sn Pb

* selective

Ordering information

Replace xxx with required number of poles, e.g.

892-39-xxx-20-902 for a double row version with 12 pins per

row becomes: 892-39-024-20-902

Availability:

single row: 1 to 36 contacts, standard 36 contacts

double row: 4 to 72 contacts, standard 72 contacts

Order Codes Dimensions

Plating 19 Plating 39 Plating 90 Solder side Connector side Min. length of

B±0.2 A±0.2 gold plating G

Single row

890-19-xxx-20-902 890-39-xxx-20-902 890-90-xxx-20-902 2.5 5.7 4.5

890-19-xxx-20-000 890-39-xxx-20-000 890-90-xxx-20-000 2.9 7.0 5.8

890-19-xxx-20-901 890-39-xxx-20-901 890-90-xxx-20-901 3.2 6.7 5.5

890-19-xxx-20-903 890-39-xxx-20-903 890-90-xxx-20-903 3.4 5.8 4.6

890-19-xxx-20-904 890-39-xxx-20-904 890-90-xxx-20-904 5.1 5.7 4.5

Double row

892-19-xxx-20-902 892-39-xxx-20-902 892-90-xxx-20-902 2.5 5.7 4.5

892-19-xxx-20-000 892-39-xxx-20-000 892-90-xxx-20-000 2.9 7.0 5.8

892-19-xxx-20-901 892-39-xxx-20-901 892-90-xxx-20-901 3.2 6.7 5.5

892-19-xxx-20-903 892-39-xxx-20-903 892-90-xxx-20-903 3.4 5.8 4.6

For other pin and solder tail lenghts, triple row headers, double body board spacer

(Sandwich) headers and SMT or press-fit terminations please consult.

Products not available from stock. Please consult PRECI-DIP.

Series 310 / 410

PCB connectors 2.54 mm

Single row / double row

Solder tail

Receptacles, solder tail

Accept pins ∅0.40–0.56 mm

For corresponding pin connectors see

pages 43 to 46

Ordering information

Replace xx with the number of poles, e.g. 410-91-2xx-41-001

for a double row version with 8 pins per row becomes:

410-91-216-41-001

310-13-1xx-41-001

310-91-1xx-41-001

310-93-1xx-41-001

310-97-1xx-41-001

310-99-1xx-41-001

Straight receptacle: solder tail,

single row

Availability from: 1 to 64 contacts

Standard number of contacts 5,

6, 8, 10, 14, 16, 20, 21, 25, 30,

32, 48, 56, 60, 64

410-13-2xx-41-001

410-91-2xx-41-001

410-93-2xx-41-001

410-97-2xx-41-001

410-99-2xx-41-001

Straight receptacle: solder tail,

double row

Availability from: 4 to 72 contacts

Standard number of contacts 40,

44, 56, 64, 72

310-91-1xx-01-640

310-93-1xx-01-640

310-97-1xx-01-640

310-99-1xx-01-640

Straight receptacle: solder tail,

single row, with standoff

Availability from: 1 to 32 contacts

Standard number of contacts 14,

20, 32

Option

On request double and triple row

310-91-1xx-01-666

310-93-1xx-01-666

310-97-1xx-01-666

310-99-1xx-01-666

Straight receptacle: with clinched

(right/left) solder tails, single row

Availability from: 3 to 64 contacts

Standard number of contacts 5,

6, 8, 10, 14, 16, 20, 21, 25, 30,

32, 48, 56, 60, 64

Platings Sleeve Clip Pin

13 0.25 µm Au 0.75 µm Au

91 5 µm Sn Pb 0.25 µm Au

93 5 µm Sn Pb 0.75 µm Au

97 5 µm Sn Pb Goldflash

99 5 µm Sn Pb 5 µm Sn Pb

Products not available from stock. Please consult PRECI-DIP.

Series 311 / 411 / 315 / 415

PCB connectors 2.54 mm

Single row / double row

Solder tail

Receptacles, solder tail

Accept pins ∅0.40–0.56 mm

For corresponding pin connectors see pages

43 to 46

Ordering information

Replace xx with the number of poles, e.g. 411-91-2xx-41-001

for a double row version with 8 pins per row becomes:

411-91-216-41-001

311-91-1xx-41-001

311-93-1xx-41-001

311-99-1xx-41-001

Straight receptacle: solder tail,

long, single row

Availability from: 1 to 64 contacts

Standard number of contacts 5,

6, 8, 10, 14, 16, 20, 21, 25, 30,

32, 48, 56, 60, 64

411-91-2xx-41-001

411-93-2xx-41-001

411-99-2xx-41-001

Straight receptacle: solder tail,

long, double row

Availability from: 4 to 72 contacts

Standard number of contacts 40,

44, 56, 64, 72

Very low profile:

315-91-1xx-41-001

315-93-1xx-41-001

315-99-1xx-41-001

415-91-2xx-41-001

415-93-2xx-41-001

415-99-2xx-41-001

Straight receptacle: solder tail,

single row, low profile

Availability from: 1 to 64 contacts

Standard number of contacts 5,

6, 8, 10, 14, 16, 20, 21, 25, 30,

32, 48, 56, 60, 64

Straight receptacle: solder tail,

double row, low profile

Availability from: 4 to 72 contacts

Standard number of contacts 40,

44, 56, 64, 72

Ultra low profile:

315-91-1xx-41-003

315-93-1xx-41-003

315-97-1xx-41-003

315-99-1xx-41-003

Straight receptacle: solder tail,

single row, ultra low profile

Availability from: 1 to 64 contacts

Standard number of contacts 20,

56 and 64

Ultra low version not available as

double row

Platings Sleeve Clip Pin

91 5 µm Sn Pb 0.25 µm Au

93 5 µm Sn Pb 0.75 µm Au

97 5 µm Sn Pb Goldflash

99 5 µm Sn Pb 5 µm Sn Pb

Products not available from stock. Please consult PRECI-DIP.

Series 316 / 416

PCB connectors 2.54 mm

Single row / double row

Solder tail

Interconnect receptacles, solder tail

Receptacles accept pins ∅0.40–0.56 mm

For corresponding pin connectors see pages

43 to 46

Ordering information

Replace xx with the number of poles, e.g. 416-93-2xx-41-006

for a double row version with 8 pins per row becomes:

416-93-216-41-006

Option:

On request triple row

L =

6 mm 316-93-1xx-41-006

8 mm 316-93-1xx-41-003

9 mm 316-93-1xx-41-012

10 mm 316-93-1xx-41-007

12 mm 316-93-1xx-41-008

13 mm 316-93-1xx-41-009

15 mm 316-93-1xx-41-001

18 mm 316-93-1xx-41-011

22 mm 316-93-1xx-41-004

33 mm 316-93-1xx-41-013

Interconnect receptacle: solder

tail, single row

Availability from: 1 to 64 contacts

Standard number of contacts 5,

6, 8, 10, 14, 16, 20, 21, 25, 30,

32, 48, 56, 60, and 64

L =

6 mm 416-93-2xx-41-006

8 mm 416-93-2xx-41-003

9 mm 416-93-2xx-41-012

10 mm 416-93-2xx-41-007

12 mm 416-93-2xx-41-008

13 mm 416-93-2xx-41-009

15 mm 416-93-2xx-41-001

18 mm 416-93-2xx-41-011

22 mm 416-93-2xx-41-004

33 mm 416-93-2xx-41-013

Interconnect receptacle: solder

tail, double row

Availability from: 4 to 72 contacts

Standard number of contacts 40,

44, 56, 64 and 72

Platings Sleeve Clip Pin

93 5 µm Sn Pb 0.75 µm Au

Series 399 / 499

PCB connectors 2.54 mm

Single row / double row

Solder tail

Right angle receptacles, solder tail

Receptacles accept pins

∅0.40–0.56 mm

For corresponding connectors see pages 43 to 46

Ordering information

Replace xx with the number of poles, e.g. 499-93-2xx-10-003

for a double row version with 8 pins per row becomes:

499-93-216-10-003

399-91-1xx-10-003

399-93-1xx-10-003 Right angle receptacle: single row

Availability from: 1 to 64 contacts

Standard number of contacts 5,

6, 8, 10, 14, 16, 20, 21, 25, 30,

32, 48, 56, 60, 64

499-91-2xx-10-003

499-93-2xx-10-003 Right angle receptacle: double

row

Availability from: 4 to 72 contacts

Standard number of contacts 40,

44, 56, 64, 72

Platings Sleeve Clip Pin

91 5 µm Sn Pb 0,25 µm Au

93 5 µm Sn Pb 0,75 µm Au

310-91-1xx-41-205

310-93-1xx-41-205

310-97-1xx-41-205

310-99-1xx-41-205

SMD receptacle: single row,

parallel mount

Availability from: 1 to 64 contacts

Standard number of contacts 5,

6, 8, 10, 14, 16, 20, 21, 25, 30,

32, 48, 56, 60, 64

Series 310 / 410

PCB connectors 2.54 mm

Single row / double row

Surface mount

Receptacles, surface mount

Accept pins ∅0.40–0.56 mm

For corresponding pin connectors see pages

43 to 46

Ordering information

Replace xx with the number of poles, e.g. 410-91-2xx-41-105

for a double row version with 8 pins per row becomes:

410-91-216-41-105

310-91-1xx-41-105

310-93-1xx-41-105

310-97-1xx-41-105

310-99-1xx-41-105

SMD receptacle: single row,

perpendicular mount

Availability from: 3 to 64 contacts

Standard number of contacts 5,

6, 8, 10, 14, 16, 20, 21, 25, 30,

32, 48, 56, 60, 64

410-91-2xx-41-105

410-93-2xx-41-105

410-97-2xx-41-105

410-99-2xx-41-105

SMD receptacle: double row,

perpendicular mount

Availability from: 4 to 72 contacts

Standard number of contacts 40,

44, 56, 64, 72

Platings Sleeve Clip Pin

91 5 µm Sn Pb 0.25 µm Au

93 5 µm Sn Pb 0.75 µm Au

97 5 µm Sn Pb Goldflash

99 5 µm Sn Pb 5 µm Sn Pb

446-91-2xx-41-035

446-93-2xx-41-035

446-99-2xx-41-035

Press-fit receptacle connector:

double row, compliant pin

for plated-thru hole

∅1 (+0.09/–0.06) mm

Availability from: 4 to 72 contacts

Standard number of contacts 40,

44, 56, 64, 72

For PCB thickness 2.1 to 3.2 mm

Series 346 / 446

PCB connectors 2.54 mm

Single row / Double row

Press-fit

Receptacles, press-fit

For solderless mount into PCB, plated-thru holes,

for pins ∅0.40–0.56 mm

For corresponding pin connectors see pages 43 to 46

New version with modified eye of the needle pin

Ordering information

Replace xx with the number of poles, e.g. 346-93-1xx-41-035

for a single row version with 8 pins becomes:

346-93-108-41-035

(Older versions 346/446-..-...-41-012/013/019 please consult)

346-91-1xx-41-036

346-93-1xx-41-036

346-99-1xx-41-036

Press-fit receptacle connector:

single row, compliant pin

for plated-thru hole

∅1 (+0.09/–0.06) mm

Availability from: 1 to 64 contacts

Standard number of contacts 5,

6, 8, 10, 14, 16, 20, 21, 25, 30,

32, 48, 56, 60, 64

For PCB thickness 1.5 to 2.0 mm

446-91-2xx-41-036

446-93-2xx-41-036

446-99-2xx-41-036

Press-fit receptacle connector:

double row, compliant pin

for plated-thru hole

∅1 (+0.09/–0.06) mm

Availability from: 4 to 72 contacts

Standard number of contacts 40,

44, 56, 64, 72

For PCB thickness 1.5 to 2.0 mm

346-91-1xx-41-035

346-93-1xx-41-035

346-99-1xx-41-035

Press-fit receptacle connector:

single row, compliant pin

for plated-thru hole

∅1 (+0.09/–0.06) mm

Availability from: 1 to 64 contacts

Standard number of contacts 5,

6, 8, 10, 14, 16, 20, 21, 25, 30,

32, 48, 56, 60, 64

For PCB thickness 2.1 to 3.2 mm

Platings Sleeve Clip Pin

91 5 µm Sn Pb 0.25 µm Au

93 5 µm Sn Pb 0.75 µm Au

99 5 µm Sn Pb 5 µm Sn Pb

Series 321–326 / 421–426

PCB connectors 2.54 mm

Single row / double row / wire-wrap

1/2/3/4 level / wire-wrap solder tail

Receptacles with wire-wrap posts

Interconnect receptacles with wire-wrap

– solder tail combination

Accept pins ∅0.40–0.56 mm

For corresponding pin connectors see pages

43 to 46

Ordering information

Replace xx with required number of poles, e.g.

423-91-2xx-41-001 for a double row version with 8 poles per

row becomes:

423-91-216-41-001

L =

321-93-1xx-41-001 6.6

322-**-1xx-41-001 9.4

323-**-1xx-41-001 12.95

324-93-1xx-41-002 16.0

Please note: ** = all platings

available; 93 = this plating

only.

Wire-wrap receptacle, 1, 2, 3 and

4 level: single row

Availability from: 1 to 64 contacts

Standard number of contacts 5,

6, 8, 10, 14, 16, 20, 21, 25, 30,

32, 48, 56, 60, 64

326-93-1xx-41-001 L = 5.9

326-93-1xx-41-002 L = 8.9

326-93-1xx-41-003 L = 11.9

Interconnect receptacle with

wire-wrap – solder tail combina-

tion, single row

Availability from: 1 to 64 contacts

Standard number of contacts 5,

6, 8, 10, 14, 16, 20, 21, 25, 30,

32, 48, 56, 60, 64

L =

421-93-2xx-41-001 6.6

422-**-2xx-41-001 9.4

423-**-2xx-41-001 12.95

424-93-2xx-41-002 16.0

Please note: ** = all platings

available; 93 = this plating

only.

Wire-wrap receptacle, 1, 2, 3 and

4 level: double row

Availability from: 4 to 72 contacts

Standard number of contacts 40,

44, 56, 64, 72

Platings Sleeve Clip Pin

13 0.25 µm Au 0.75 µm Au

91 5 µm Sn Pb 0.25 µm Au

93 5 µm Sn Pb 0.75 µm Au

99 5 µm Sn Pb 5 µm Pb

426-93-2xx-41-001 L = 5.9

426-93-2xx-41-002 L = 8.9

426-93-2xx-41-003 L = 11.9

Interconnect receptacle with

wire-wrap – solder tail combina-

tion, double row

Availability from: 4 to 72 contacts

Standard number of contacts 40,

44, 56, 64, 72

Products not available from stock. Please consult PRECI-DIP.

Series 350 / 450

PCB connectors 2.54 mm

Single row / double row

Solder tail

Pin connectors, solder tail

With screw-machined pins ∅0.47 mm

For corresponding receptacles see pages

36 to 42 and 47, 48

New:

Pin connectors with selective plated precision screw machined

pin, plating code Z1.

Connecting side 1: gold plated

soldering/PCB side 2: tin plated

Ordering information

Replace xx with the number of poles, e.g. 450-10-2xx-00-001

for a double row version with 8 pins per row becomes:

450-10-216-00-001

350-10-1xx-00-006

350-90-1xx-00-006

350-Z1-1xx-00-006

Straight pin connector: solder

tail, single row

Availability from: 1 to 64 contacts

Standard number of contacts 5,

6, 8, 10, 14, 16, 20, 21, 25, 30,

32, 48, 56, 60, 64

450-10-2xx-00-006

450-90-2xx-00-006

450-Z1-2xx-00-006

Straight pin connector: solder

tail, double row

Availability from: 4 to 72 contacts

Standard number of contacts 40,

44, 56, 64, 72

350-10-1xx-01-666

350-90-1xx-01-666

350-Z1-1xx-01-666

Straight pin connector with

clinched (right/left) solder tails,

single row

Availability from: 3 to 64 contacts

Standard number of contacts 5,

6, 8, 10, 14, 16, 20, 21, 25, 30,

32, 48, 56, 60, 64

Platings Sleeve Clip Pin

10 0.25 µm Au

90 5 µm Sn Pb

Z1 1: 0.25 µm Au

2: 5 µm Sn Pb

Series 350 / 351 / 450 / 451

PCB connectors 2.54 mm

Single row / double row

Solder tail

Pin connectors, solder tail

With screw-machined pins ∅0.47 mm

For corresponding receptacles see pages 36 to 42

and 47, 48

Ordering information

Replace xx with the number of poles, e.g. 450-10-2xx-00-001

for a double row version with 8 pins per row becomes:

450-10-216-00-001

350-10-1xx-00-001

350-90-1xx-00-001 Straight pin connector: solder

tail, single row

Availability from: 1 to 64 contacts

Standard number of contacts 5,

6, 8, 10, 14, 16, 20, 21, 25, 30,

32, 48, 56, 60, 64

Note:

For new designs refer to 006 ver-

sion

450-10-2xx-00-001

450-90-2xx-00-001 Straight pin connector: solder

tail, double row

Availability from: 4 to 72 contacts

Standard number of contacts 40,

44, 56, 64, 72

Note:

For new designs refer to 006 ver-

sion

L =

351-10-1xx-00-003 6.2 mm

351-90-1xx-00-003

351-10-1xx-00-004 8.4 mm

351-90-1xx-00-004

351-10-1xx-00-005 15.3 mm

351-90-1xx-00-005

351-10-1xx-00-016 21.2 mm

351-90-1xx-00-016

351-10-1xx-00-017 27.4 mm

351-90-1xx-00-017

Straight interconnect pin con-

nector solder tail, single row

Availability from: 1 to 64 contacts

Standard number of contacts 5,

6, 8, 10, 14, 16, 20, 21, 25, 30,

32, 48, 56, 60, 64

L =

451-10-2xx-00-003 6.2 mm

451-90-2xx-00-003

451-10-2xx-00-004 8.4 mm

451-90-2xx-00-004

451-10-2xx-00-005 15.3 mm

451-90-2xx-00-005

451-10-2xx-00-016 21.2 mm

451-90-2xx-00-016

451-10-2xx-00-017 27.4 mm

451-90-2xx-00-017

Straight interconnect pin con-

nector solder tail, double row

Availability from: 4 to 72 contacts

Standard number of contacts 40,

44, 56, 64, 72

Platings Sleeve Clip Pin

10 0.25 µm Au

90 5 µm Sn Pb

Series 399 / 499

PCB connectors 2.54 mm

Single row / double row

Solder tail

Right angle pin connectors, solder tail

Pin connectors with pins ∅0.47 mm

For corresponding connectors see pages

36 to 42 and 47, 48

New:

Pin connectors with selective plated precision screw machined

pin, plating code Z1.

Connecting side 1: gold plated

soldering/PCB side 2: tin plated

Ordering information

Replace xx with the number of poles, e.g. 499-93-2xx-10-009

for a double row version with 8 pins per row becomes:

499-93-216-10-009

399-10-1xx-10-009

399-90-1xx-10-009

399-Z1-1xx-10-009

Right angle pin connector: single

row

Availability from: 1 to 64 contacts

Standard number of contacts 5,

6, 8, 10, 14, 16, 20, 21, 25, 30,

32, 48, 56, 60, 64

499-10-2xx-10-009

499-90-2xx-10-009

499-Z1-2xx-10-009

Right angle pin connector:

double row

Availability from: 4 to 72 contacts

Standard number of contacts 40,

44, 56, 64, 72

Platings Sleeve Clip Pin

10 0,25 µm Au

90 5 µm Sn Pb

Z1 1: 0.25 µm Au

2: 5 µm Sn Pb

350-10-1xx-00-206

350-90-1xx-00-206

350-Z1-1xx-00-206

SMD pin connector: single row,

parallel mount

Availability from: 1 to 64 contacts

Standard number of contacts 5,

6, 8, 10, 14, 16, 20, 21, 25, 30,

32, 48, 56, 60, 64

Series 350 / 450

PCB connectors 2.54 mm

Single row / double row

Surface mount

Pin connectors, surface mount

With screw machined pins ∅0.47 mm

For corresponding receptacles see

pages 36 to 42 and 47, 48

New:

Pin connectors with selective plated precision screw machined

pin, plating code Z1.

Connecting side 1: gold plated

soldering/PCB side 2: tin plated

Ordering information

Replace xx with the number of poles, e.g. 350-10-1xx-00-106

for a single row version with 16 contacts becomes:

350-10-116-00-106

350-10-1xx-00-106

350-90-1xx-00-106

350-Z1-1xx-00-106

SMD pin connector: single row,

perpendicular mount

Availability from: 3 to 64 contacts

Standard number of contacts 5,

6, 8, 10, 14, 16, 20, 21, 25, 30,

32, 48, 56, 60, 64

450-10-2xx-00-106

450-90-2xx-00-106

450-Z1-2xx-00-106

SMD pin connector: double row,

perpendicular mount

Availability from: 4 to 72 contacts

Standard number of contacts 40,

44, 56, 64, 72

Platings Sleeve Clip Pin

10 0.25 µm Au

90 5 µm Sn Pb

Z1 1: 0.25 µm Au

2: 5 µm Sn Pb

Series 712 / 714

PCB connectors carrier assemblies 2.54 mm

Single row / double row

Solder tail

PCB “Zero profile” receptacles

Accept pins ∅0.40–0.56 mm

Single receptacle contacts for solder mount into PCB,

supplied on disposable carriers.

For corresponding pin connectors see pages 43 to 46

Ordering information

Replace xx with the number of poles, e.g. 714-91-2xx-41-001

for a double row version with 8 pins per row becomes:

714-91-216-41-001

Option:

Double row, disposable carrier strip on request

712-91-1xx-41-001

712-93-1xx-41-001

712-99-1xx-41-001

Straight receptacle contacts: sol-

der mount, into PCB thickness

1.4 to 2 mm with hole ∅0.7 to

0.9 mm

Availability: supplied on single

row, disposable carrier strip, from

2 to 64 contacts

Standard number of contacts 5,

6, 8, 10, 14, 16, 20, 21, 25, 30,

32, 48, 56, 60, 64

714-91-1xx-41-001

714-93-1xx-41-001

714-99-1xx-41-001

Straight receptacle contacts: sol-

der mount into PCB thickness 1

to 2.6 mm with hole ∅1.5 mm

Availability: supplied on single

row, disposable carrier strip, from

2 to 64 contacts

Standard number of contacts 5,

6, 8, 10, 14, 16, 20, 21, 25, 30,

32, 48, 56, 60, 64

714-91-1xx-41-014

714-93-1xx-41-014

714-99-1xx-41-014

Straight receptacle contacts: sol-

der mount into PCB thickness 1

to 4 mm with hole ∅1.5 mm

Availability: supplied on single

row, disposable carrier strip, from

2 to 64 contacts

Standard number of contacts 5,

6, 8, 10, 14, 16, 20, 21, 25, 30,

32, 48, 56, 60, 64

Platings Sleeve Clip Pin

91 5 µm Sn Pb 0.25 µm Au

93 5 µm Sn Pb 0.75 µm Au

99 5 µm Sn Pb 5 µm Sn Pb

Products not available from stock. Please consult PRECI-DIP.

Series 714

PCB connectors carrier assemblies 2.54 mm

Single row / double row

Solder tail / press-fit

PCB “Zero profile” receptacles

Accept pins ∅0.40–0.54 mm

Single receptacle contacts for solder- and press-fit

solderless mount into PCB, supplied on disposable carriers

For corresponding pin connectors see pages 43 to 46

Ordering information

Replace xx with the number of poles, e.g. 714-91-1xx-31-012

for a single row version with 8 pins per row becomes:

714-91-108-31-012

Option:

Double row, disposable carrier strip on request

714-91-1xx-31-012

714-93-1xx-31-012

714-99-1xx-31-012

Straight receptacle contacts: sol-

der mount into PCB thickness 1

to 2.4 mm with hole ∅1mm

Availability: supplied on single

row, disposable carrier strip, from

2 to 64 contacts

Standard number of contacts 5,

6, 8, 10, 14, 16, 20, 21, 25, 30,

32, 48, 56, 60, 64

714-91-1xx-31-018

714-93-1xx-31-018

714-99-1xx-31-018

Straight receptacle contacts: sol-

der mount into PCB thickness 1

to 3.4 mm with hole ∅1mm

Availability: supplied on single

row, disposable carrier strip, from

2 to 64 contacts

Standard number of contacts 5,

6, 8, 10, 14, 16, 20, 21, 25, 30,

32, 48, 56, 60, 64

714-91-1xx-31-008

714-93-1xx-31-008

714-99-1xx-31-008

Straight receptacle contacts: sol-

derless press-fit mount into PCB

thickness 1.5 to 2.5 mm with

plated-thru hole ∅1.05 mm

(± 0.05)

Availability: supplied on single

row, disposable carrier strip, from

2 to 64 contacts

Standard number of contacts 5,

6, 8, 10, 14, 16, 20, 21, 25, 30,

32, 48, 56, 60, 64

Platings Sleeve Clip Pin

91 5 µm Sn Pb 0.25 µm Au

93 5 µm Sn Pb 0.75 µm Au

99 5 µm Sn Pb 5 µm Sn Pb

Products not available from stock. Please consult PRECI-DIP.

Technical specifications

Materials

– Insulator: Glass filled thermoplastic polyester, self extin-

guishing UL 94 V-0, colour black, resistant to mineral acids,

solvents, greases, oils (short time).

– Receptacle contact:

– Sleeve: Screw-machined brass (QQ-B-626), gold or tin-lead

plated (90/10) over 2–3 µm nickel

– Clip: Stamped beryllium-copper (QQ-C-533), gold or tin-

lead (90/10) plated over 2–3 µm nickel

– Pin contact: Screw-machined brass (QQ-B-626) or phosphor

bronze (QQ-B-750), gold or tin-lead plated (90/10) over

2–3 µm nickel

Mechanical data

– Insertion characteristics

(measured with a polished steel gauge, typical values):

– Type of clip (finger): 4 4 3 6

standard short

– Gauge diameter (mm): 0.43 0.43 0.43 0.46

– Insertion force (N): 1.8 2 1 0.6

– Withdrawal force (N): 0.9 1 0.5 0.3

– Mechanical life: min. 100 cycles

Electrical data

– Rated current: 1 A

– Rated voltage: 100 VRMS / 150 VDC

– Contact resistance: 10 mΩmax.

– Insulation resistance: 10 000 MΩmin.

– Dielectric strength: 1000 VRMS min.

(700 for Series 117 Shrink-Dip)

– Air and creepage distances: 0.6 mm

(0.3 for Series 117 Shrink-Dip)

– Capacitance: 0.3 pF max.

(1 for series 117 Shrink-Dip)

Environmental data

– Operating temperature: –55/+125°C

– Vibration

(10–2000 Hz, 15 g): no electrical discontinuity > 1 µs

– Shock: (50 g): no electrical discontinuity > 1 µs

– Solderability

(IEC 68-2-54 Ta): 235°C, 5 s

– Resistance to soldering heat:

(IEC 68-2-20 Tb): 260°C, 5 s

– Resistance to atmospheric

corrosion: IEC 68-2-42 and 43

– Climatic category (IEC): 55/125/21

Dual-in-line sockets

and carriers

Dual-in-line

Insulator bodies

Standard, open frame

210

Fig. 1

304

Fig. 2

306

Fig. 3

308

Fig. 4

310

Fig. 5

312

Fig. 5a

314

Fig. 6

316

Fig. 7

318

Fig. 8

320

Fig. 9

322

Fig. 10

324

Fig. 11

328

Fig. 12

420

Fig. 12a

422

Fig. 13

424

Fig. 14

428

Fig. 15

432

Fig. 16

610

Fig. 16a

624

Fig. 17

628

Fig. 18

632

Fig. 19

636

Fig. 20

640

Fig. 21

642

Fig. 22

648

Fig. 23

650

Fig. 24

652

Fig. 25

950

Fig. 26

952

Fig. 27

964

Fig. 28

Open frame insulators 318, 320, 322, 324,

624, 628, 632, 640 and 648 available on

special request without center bars.

Order number same as the corresponding

socket with bars but with suffix 050 added.

Example:

110-93-628-41-001 standard

110-93-628-41-001050

Same but without center bar.

Dual-in-line

Insulator bodies

Standard, closed frame

Ultra low, open frame

Standard, closed frame

Ultra low, open frame

306

Fig. 30

308

Fig. 31

310

Fig. 32

314

Fig. 33

316

Fig. 34

318

Fig. 35

320

Fig. 36

324

Fig. 37

422

Fig. 38

424

Fig. 39

624

Fig. 40

628

Fig. 41

632

Fig. 42

636

Fig. 43

640

Fig. 44

648

Fig. 45

306

Fig. 50

308

Fig. 51

314

Fig. 52

316

Fig. 53

318

Fig. 54

320

Fig. 55

322

Fig. 56

324

Fig. 57

328

Fig. 58

420

Fig. 59

422

Fig. 60

424

Fig. 61

428

Fig. 62

624

Fig. 63

628

Fig. 64

632

Fig. 65

636

Fig. 66

640

Fig. 67

648

Fig. 68

650

Fig. 69

310

Fig. 51a

Dual-in-line

Insulator bodies

Shrinkdip, open and closed frame

Automatic insertion, open frame

Shrinkdip,

open and closed frame

Automatic insertion,

open frame

316

Fig. 70

428

Fig. 71

430

Fig. 71a

432

Fig. 71b

448

Fig. 72

620

Fig. 81

624

Fig. 82

628

Fig. 73

640

Fig. 74

642

Fig. 75

648

Fig. 76

652

Fig. 77

656

Fig. 77a

664

Fig. 78

668

Fig. 79

764

Fig. 80

764

Fig. 90

306

Fig. 100

308

Fig. 101

314

Fig. 102

316

Fig. 103

318

Fig. 104

320

Fig. 105

324

Fig. 106

422

Fig. 107

640

Fig. 108

Series 110

Dual-in-line sockets

Open frame

Solder tail

Most popular line of

standard low profile

IC-Sockets.

Open frame design

leaves space beneath IC

for improved heat

dissipation, easier PCB

cleaning and inspections

Insertion

characteristics:

4-finger standard

Platings Sleeve Clip Pin

13 0.25 µm Au 0.75 µm Au

91 5 µm Sn Pb 0.25 µm Au

93 5 µm Sn Pb 0.75 µm Au

97 5 µm Sn Pb Goldflash

99 5 µm Sn Pb 5 µm Sn Pb

Ordering information

For standard versions see table (order codes)

Option (*):

Open frame insulators 318, 320, 322, 324, 624, 628, 632, 640

and 648 available on special request without center bars; add

suffix 050 to the part number. Example: 110–93–628–41–001

becomes: 110–93–628–41–001-050

10 110-13-210-41-001 110-91-210-41-001 110-93-210-41-001 110-97-210-41-001 110-99-210-41-001 Fig. 1 12.6 5.08 7.6

4 110-13-304-41-001 110-91-304-41-001 110-93-304-41-001 110-97-304-41-001 110-99-304-41-001 Fig. 2 5.0 7.62 10.1

6 110-13-306-41-001 110-91-306-41-001 110-93-306-41-001 110-97-306-41-001 110-99-306-41-001 Fig. 3 7.6 7.62 10.1

8 110-13-308-41-001 110-91-308-41-001 110-93-308-41-001 110-97-308-41-001 110-99-308-41-001 Fig. 4 10.1 7.62 10.1

10 110-13-310-41-001 110-91-310-41-001 110-93-310-41-001 110-97-310-41-001 110-99-310-41-001 Fig. 5 12.6 7.62 10.1

12 110-13-312-41-001 110-91-312-41-001 110-93-312-41-001 110-97-312-41-001 110-99-312-41-001 aFig. 5a 15.2 7.62 10.1

14 110-13-314-41-001 110-91-314-41-001 110-93-314-41-001 110-97-314-41-001 110-99-314-41-001 Fig. 6 17.7 7.62 10.1

16 110-13-316-41-001 110-91-316-41-001 110-93-316-41-001 110-97-316-41-001 110-99-316-41-001 Fig. 7 20.3 7.62 10.1

*18* 110-13-318-41-001 110-91-318-41-001 110-93-318-41-001 110-97-318-41-001 110-99-318-41-001 Fig. 8 22.8 7.62 10.1

*20* 110-13-320-41-001 110-91-320-41-001 110-93-320-41-001 110-97-320-41-001 110-99-320-41-001 Fig. 9 25.3 7.62 10.1

*22* 110-13-322-41-001 110-91-322-41-001 110-93-322-41-001 110-97-322-41-001 110-99-322-41-001 Fig. 10 27.8 7.62 10.1

*24* 110-13-324-41-001 110-91-324-41-001 110-93-324-41-001 110-97-324-41-001 110-99-324-41-001 Fig. 11 30.4 7.62 10.1

28 110-13-328-41-001 110-91-328-41-001 110-93-328-41-001 110-97-328-41-001 110-99-328-41-001 Fig. 12 35.5 7.62 10.1

20 110-13-420-41-001 110-91-420-41-001 110-93-420-41-001 110-97-420-41-001 110-99-420-41-001 aFig. 12a 25.3 10.16 12.6

22 110-13-422-41-001 110-91-422-41-001 110-93-422-41-001 110-97-422-41-001 110-99-422-41-001 Fig. 13 27.8 10.16 12.6

24 110-13-424-41-001 110-91-424-41-001 110-93-424-41-001 110-97-424-41-001 110-99-424-41-001 Fig. 14 30.4 10.16 12.6

28 110-13-428-41-001 110-91-428-41-001 110-93-428-41-001 110-97-428-41-001 110-99-428-41-001 Fig. 15 35.5 10.16 12.6

32 110-13-432-41-001 110-91-432-41-001 110-93-432-41-001 110-97-432-41-001 110-99-432-41-001 Fig. 16 40.6 10.16 12.6

10 110-13-610-41-001 110-91-610-41-001 110-93-610-41-001 110-97-610-41-001 110-99-610-41-001 aFig. 16a 12.6 15.24 17.7

*24* 110-13-624-41-001 110-91-624-41-001 110-93-624-41-001 110-97-624-41-001 110-99-624-41-001 Fig. 17 30.4 15.24 17.7

*28* 110-13-628-41-001 110-91-628-41-001 110-93-628-41-001 110-97-628-41-001 110-99-628-41-001 Fig. 18 35.5 15.24 17.7

*32* 110-13-632-41-001 110-91-632-41-001 110-93-632-41-001 110-97-632-41-001 110-99-632-41-001 Fig. 19 40.6 15.24 17.7

36 110-13-636-41-001 110-91-636-41-001 110-93-636-41-001 110-97-636-41-001 110-99-636-41-001 Fig. 20 45.7 15.24 17.7

*40* 110-13-640-41-001 110-91-640-41-001 110-93-640-41-001 110-97-640-41-001 110-99-640-41-001 Fig. 21 50.6 15.24 17.7

42 110-13-642-41-001 110-91-642-41-001 110-93-642-41-001 110-97-642-41-001 110-99-642-41-001 Fig. 22 53.2 15.24 17.7

*48* 110-13-648-41-001 110-91-648-41-001 110-93-648-41-001 110-97-648-41-001 110-99-648-41-001 Fig. 23 60.9 15.24 17.7

50 110-13-650-41-001 110-91-650-41-001 110-93-650-41-001 110-97-650-41-001 110-99-650-41-001 Fig. 24 63.4 15.24 17.7

52 110-13-652-41-001 110-91-652-41-001 110-93-652-41-001 110-97-652-41-001 110-99-652-41-001 Fig. 25 65.9 15.24 17.7

50 110-13-950-41-001 110-91-950-41-001 110-93-950-41-001 110-97-950-41-001 110-99-950-41-001 Fig. 26 63.4 22.86 25.3

52 110-13-952-41-001 110-91-952-41-001 110-93-952-41-001 110-97-952-41-001 110-99-952-41-001 Fig. 27 65.9 22.86 25.3

64 110-13-964-41-001 110-91-964-41-001 110-93-964-41-001 110-97-964-41-001 110-99-964-41-001 Fig. 28 81.1 22.86 25.3

No. Insulator

of Order Codes dimen-

poles sions

Plating 13 Plating 91 Plating 93 Plating 97 Plating 99 See ABC

page 50

Products not available from stock. Please consult PRECI-DIP.

Series 111

Dual-in-line sockets for multilayer PCB

Open frame

Solder tail

Standard Dual-in-line

socket with increased sol-

der tail length of 4.2 mm,

allowing application on

multilayer PCBs up to

3.4 mm thickness. Other

lengths on request

Insertion

characteristics:

4-finger standard

Platings Sleeve Clip Pin

91 5 µm Sn Pb 0.25 µm Au

93 5 µm Sn Pb 0.75 µm Au

99 5 µm Sn Pb 5 µm Sn Pb

Ordering information

For complete part number see Order Codes list below

10 111-91-210-41-001 111-93-210-41-001 111-99-210-41-001 Fig. 1 12.6 5.08 7.6

4 111-91-304-41-001 111-93-304-41-001 111-99-304-41-001 Fig. 2 5.0 7.62 10.1

6 111-91-306-41-001 111-93-306-41-001 111-99-306-41-001 Fig. 3 7.6 7.62 10.1

8 111-91-308-41-001 111-93-308-41-001 111-99-308-41-001 Fig. 4 10.1 7.62 10.1

10 111-91-310-41-001 111-93-310-41-001 111-99-310-41-001 Fig. 5 12.6 7.62 10.1

12 111-91-312-41-001 111-93-312-41-001 111-99-312-41-001 aFig. 5a 15.2 7.62 10.1

14 111-91-314-41-001 111-93-314-41-001 111-99-314-41-001 Fig. 6 17.7 7.62 10.1

16 111-91-316-41-001 111-93-316-41-001 111-99-316-41-001 Fig. 7 20.3 7.62 10.1

18 111-91-318-41-001 111-93-318-41-001 111-99-318-41-001 Fig. 8 22.8 7.62 10.1

20 111-91-320-41-001 111-93-320-41-001 111-99-320-41-001 Fig. 9 25.3 7.62 10.1

22 111-91-322-41-001 111-93-322-41-001 111-99-322-41-001 Fig. 10 27.8 7.62 10.1

24 111-91-324-41-001 111-93-324-41-001 111-99-324-41-001 Fig. 11 30.4 7.62 10.1

28 111-91-328-41-001 111-93-328-41-001 111-99-328-41-001 Fig. 12 35.5 7.62 10.1

20 111-91-420-41-001 111-93-420-41-001 110-99-420-41-001 aFig. 12a 25.3 10.16 12.6

22 111-91-422-41-001 111-93-422-41-001 111-99-422-41-001 Fig. 13 27.8 10.16 12.6

24 111-91-424-41-001 111-93-424-41-001 111-99-424-41-001 Fig. 14 30.4 10.16 12.6

28 111-91-428-41-001 111-93-428-41-001 111-99-428-41-001 Fig. 15 35.5 10.16 12.6

32 111-91-432-41-001 111-93-432-41-001 111-99-432-41-001 Fig. 16 40.6 10.16 12.6

10 111-91-610-41-001 110-93-610-41-001 110-99-610-41-001 aFig. 16a 12.6 15.24 17.7

24 111-91-624-41-001 111-93-624-41-001 111-99-624-41-001 Fig. 17 30.4 15.24 17.7

28 111-91-628-41-001 111-93-628-41-001 111-99-628-41-001 Fig. 18 35.5 15.24 17.7

32 111-91-632-41-001 111-93-632-41-001 111-99-632-41-001 Fig. 19 40.6 15.24 17.7

36 111-91-636-41-001 111-93-636-41-001 111-99-636-41-001 Fig. 20 45.7 15.24 17.7

40 111-91-640-41-001 111-93-640-41-001 111-99-640-41-001 Fig. 21 50.6 15.24 17.7

42 111-91-642-41-001 111-93-642-41-001 111-99-642-41-001 Fig. 22 53.2 15.24 17.7

48 111-91-648-41-001 111-93-648-41-001 111-99-648-41-001 Fig. 23 60.9 15.24 17.7

50 111-91-650-41-001 111-93-650-41-001 111-99-650-41-001 Fig. 24 63.4 15.24 17.7

52 111-91-652-41-001 111-93-652-41-001 111-99-652-41-001 Fig. 25 65.9 15.24 17.7

50 111-91-950-41-001 111-93-950-41-001 111-99-950-41-001 Fig. 26 63.4 22.86 25.3

52 111-91-952-41-001 111-93-952-41-001 111-99-952-41-001 Fig. 27 65.9 22.86 25.3

64 111-91-964-41-001 111-93-964-41-001 111-99-964-41-001 Fig. 28 81.1 22.86 25.3

No. Insulator

of Order Codes dimen-

poles sions

Plating 91 Plating 93 Plating 99 See ABC

page 50

B B B

Products not available from stock. Please consult PRECI-DIP.

Series 110…41-005

Dual-in-line sockets automatic insertion

Open frame

Solder tail

Standard dual-in-line

socket with soft copper

alloy machined contact

allows clinching.

Open frame design

leaves space beneath IC

for improved heat

dissipation, easier PCB

cleaning and inspections

Insertion

characteristics:

4-finger standard

Platings Sleeve Clip Pin

91 5 µm Sn Pb 0.25 µm Au

93 5 µm Sn Pb 0.75 µm Au

97 5 µm Sn Pb Goldflash

99 5 µm Sn Pb 5 µm Sn Pb

Ordering information

For standard versions see table (order codes)

Option:

On special request available with solder tail length 4.2 mm, for

multilayer boards up to 3.4 mm. Part number:

111–xx–xxx–41–013

10 110-91-210-41-005 110-93-210-41-005 110-97-210-41-005 110-99-210-41-005 Fig. 1 12.6 5.08 7.6

4 110-91-304-41-005 110-93-304-41-005 110-97-304-41-005 110-99-304-41-005 Fig. 2 5.0 7.62 10.1

6 110-91-306-41-005 110-93-306-41-005 110-97-306-41-005 110-99-306-41-005 Fig. 3 7.6 7.62 10.1

8 110-91-308-41-005 110-93-308-41-005 110-97-308-41-005 110-99-308-41-005 Fig. 4 10.1 7.62 10.1

10 110-91-310-41-005 110-93-310-41-005 110-97-310-41-005 110-99-310-41-005 Fig. 5 12.6 7.62 10.1

12 110-91-312-41-005 110-93-312-41-005 110-97-312-41-005 110-99-312-41-005 aFig. 5a 15.2 7.62 10.1

14 110-91-314-41-005 110-93-314-41-005 110-97-314-41-005 110-99-314-41-005 Fig. 6 17.7 7.62 10.1

16 110-91-316-41-005 110-93-316-41-005 110-97-316-41-005 110-99-316-41-005 Fig. 7 20.3 7.62 10.1

18 110-91-318-41-005 110-93-318-41-005 110-97-318-41-005 110-99-318-41-005 Fig. 8 22.8 7.62 10.1

20 110-91-320-41-005 110-93-320-41-005 110-97-320-41-005 110-99-320-41-005 Fig. 9 25.3 7.62 10.1

22 110-91-322-41-005 110-93-322-41-005 110-97-322-41-005 110-99-322-41-005 Fig. 10 27.8 7.62 10.1

24 110-91-324-41-005 110-93-324-41-005 110-97-324-41-005 110-99-324-41-005 Fig. 11 30.4 7.62 10.1

28 110-91-328-41-005 110-93-328-41-005 110-97-328-41-005 110-99-328-41-005 Fig. 12 35.5 7.62 10.1

20 110-91-420-41-005 110-93-420-41-005 110-97-420-41-005 110-99-420-41-005 aFig. 12a 25.3 10.16 12.6

22 110-91-422-41-005 110-93-422-41-005 110-97-422-41-005 110-99-422-41-005 Fig. 13 27.8 10.16 12.6

24 110-91-424-41-005 110-93-424-41-005 110-97-424-41-005 110-99-424-41-005 Fig. 14 30.4 10.16 12.6

28 110-91-428-41-005 110-93-428-41-005 110-97-428-41-005 110-99-428-41-005 Fig. 15 35.5 10.16 12.6

32 110-91-432-41-005 110-93-432-41-005 110-97-432-41-005 110-99-432-41-005 Fig. 16 40.6 10.16 12.6

10 110-91-610-41-005 110-93-610-41-005 110-97-610-41-005 110-99-610-41-005 aFig. 16a 12.6 15.24 17.7

24 110-91-624-41-005 110-93-624-41-005 110-97-624-41-005 110-99-624-41-005 Fig. 17 30.4 15.24 17.7

28 110-91-628-41-005 110-93-628-41-005 110-97-628-41-005 110-99-628-41-005 Fig. 18 35.5 15.24 17.7

32 110-91-632-41-005 110-93-632-41-005 110-97-632-41-005 110-99-632-41-005 Fig. 19 40.6 15.24 17.7

36 110-91-636-41-005 110-93-636-41-005 110-97-636-41-005 110-99-636-41-005 Fig. 20 45.7 15.24 17.7

40 110-91-640-41-005 110-93-640-41-005 110-97-640-41-005 110-99-640-41-005 Fig. 21 50.6 15.24 17.7

42 110-91-642-41-005 110-93-642-41-005 110-97-642-41-005 110-99-642-41-005 Fig. 22 53.2 15.24 17.7

48 110-91-648-41-005 110-93-648-41-005 110-97-648-41-005 110-99-648-41-005 Fig. 23 60.9 15.24 17.7

No. Insulator

of Order Codes dimen-

poles sions

Plating 91 Plating 93 Plating 97 Plating 99 See ABC

page 50

Series 110…41-605

Dual-in-line sockets automatic insertion

Open frame

Solder tail

Thanks to the new design

of the insulator body, this

socket line is fully com-

patible with all standard

automatic insertion

equipment

– Chamfered contact

entries for easy IC inser-

tion without bent leads.

– Soft copper alloy ma-

chined contact allows

clinching

Insertion characteristics:

4-finger standard

Platings Sleeve Clip Pin

91 5 µm Sn Pb 0.25 µm Au

93 5 µm Sn Pb 0.75 µm Au

97 5 µm Sn Pb Goldflash

99 5 µm Sn Pb 5 µm Sn Pb

Ordering information

For standard versions see table (order codes)

Option:

For multilayer boards up to 3.4 mm, solder tail 4.2 mm, we offer

series 111-xx-xxx-41-613

6 110-91-306-41-605 110-93-306-41-605 110-97-306-41-605 110-99-306-41-605 Fig. 100 7.6 7.62 10.1

8 110-91-308-41-605 110-93-308-41-605 110-97-308-41-605 110-99-308-41-605 Fig. 101 10.1 7.62 10.1

14 110-91-314-41-605 110-93-314-41-605 110-97-314-41-605 110-99-314-41-605 Fig. 102 17.7 7.62 10.1

16 110-91-316-41-605 110-93-316-41-605 110-97-316-41-605 110-99-316-41-605 Fig. 103 20.3 7.62 10.1

18 110-91-318-41-605 110-93-318-41-605 110-97-318-41-605 110-99-318-41-605 Fig. 104 22.8 7.62 10.1

20 110-91-320-41-605 110-93-320-41-605 110-97-320-41-605 110-99-320-41-605 Fig. 105 25.3 7.62 10.1

24 110-91-324-41-605 110-93-324-41-605 110-97-324-41-605 110-99-324-41-605 Fig. 106 30.4 7.62 10.1

22 110-91-422-41-605 110-93-422-41-605 110-97-422-41-605 110-99-422-41-605 Fig. 107 27.8 10.16 12.6

24 110-91-624-41-605 110-93-624-41-605 110-97-624-41-605 110-99-624-41-605 Fig. 17 30.4 15.24 17.7

28 110-91-628-41-605 110-93-628-41-605 110-97-628-41-605 110-99-628-41-605 Fig. 18 35.5 15.24 17.7

32 110-91-632-41-605 110-93-632-41-605 110-97-632-41-605 110-99-632-41-605 Fig. 19 40.6 15.24 17.7

40 110-91-640-41-605 110-93-640-41-605 110-97-640-41-605 110-99-640-41-605 Fig. 108 50.6 15.24 17.7

No. Insulator

of Order Codes dimen-

poles sions

Plating 91 Plating 93 Plating 97 Plating 99 See ABC

page 52

Series 115

Dual-in-line sockets very low profile /

ultra low profile / open frame

Solder tail

Preci-Dip “Very low / Ultra

low profile” sockets have

specially designed con-

tacts for reduced socket

height above PCB

Insertion characteristics:

4-finger standard

(very low)

4-finger short (ultra low)

Platings Sleeve Clip Pin

91 5 µm Sn Pb 0.25 µm Au

93 5 µm Sn Pb 0.75 µm Au

97 5 µm Sn Pb Goldflash

99 5 µm Sn Pb 5 µm Sn Pb

Ordering information

For standard version (ultra low) (Fig. 1) see table

Option:

Very low version (Fig. 2) is optional; change suffix 003 to 001.

Insulator body dimensions see page 50 Fig. 1 to 28. Same num-

ber of poles as standard series 110.

6 115-91-306-41-003 115-93-306-41-003 115-97-306-41-003 115-99-306-41-003 Fig. 50 7.6 7.62 10.1

8 115-91-308-41-003 115-93-308-41-003 115-97-308-41-003 115-99-308-41-003 Fig. 51 10.1 7.62 10.1

10 115-91-310-41-003 115-93-310-41-003 115-97-310-41-003 115-99-310-41-003 aFig. 51a 12.6 7.62 10.1

14 115-91-314-41-003 115-93-314-41-003 115-97-314-41-003 115-99-314-41-003 Fig. 52 17.7 7.62 10.1

16 115-91-316-41-003 115-93-316-41-003 115-97-316-41-003 115-99-316-41-003 Fig. 53 20.3 7.62 10.1

18 115-91-318-41-003 115-93-318-41-003 115-97-318-41-003 115-99-318-41-003 Fig. 54 22.8 7.62 10.1

20 115-91-320-41-003 115-93-320-41-003 115-97-320-41-003 115-99-320-41-003 Fig. 55 25.3 7.62 10.1

22 115-91-322-41-003 115-93-322-41-003 115-97-322-41-003 115-99-322-41-003 Fig. 56 27.8 7.62 10.1

24 115-91-324-41-003 115-93-324-41-003 115-97-324-41-003 115-99-324-41-003 Fig. 57 30.4 7.62 10.1

28 115-91-328-41-003 115-93-328-41-003 115-97-328-41-003 115-99-328-41-003 Fig. 58 35.5 7.62 10.1

20 115-91-420-41-003 115-93-420-41-003 115-97-420-41-003 115-99-420-41-003 Fig. 59

22 115-91-422-41-003 115-93-422-41-003 115-97-422-41-003 115-99-422-41-003 Fig. 60 27.8 10.16 12.6

24 115-91-424-41-003 115-93-424-41-003 115-97-424-41-003 115-99-424-41-003 Fig. 61 30.4 10.16 12.6

28 115-91-428-41-003 115-93-428-41-003 115-97-428-41-003 115-99-428-41-003 Fig. 62 35.5 10.16 12.6

24 115-91-624-41-003 115-93-624-41-003 115-97-624-41-003 115-99-624-41-003 Fig. 63 30.4 15.24 17.7

28 115-91-628-41-003 115-93-628-41-003 115-97-628-41-003 115-99-628-41-003 Fig. 64 35.5 15.24 17.7

32 115-91-632-41-003 115-93-632-41-003 115-97-632-41-003 115-99-632-41-003 Fig. 65 40.6 15.24 17.7

36 115-91-636-41-003 115-93-636-41-003 115-97-636-41-003 115-99-636-41-003 Fig. 66 45.7 15.24 17.7

40 115-91-640-41-003 115-93-640-41-003 115-97-640-41-003 115-99-640-41-003 Fig. 67 50.6 15.24 17.7

48 115-91-648-41-003 115-93-648-41-003 115-97-648-41-003 115-99-648-41-003 Fig. 68 60.9 15.24 17.7

50 115-91-650-41-003 115-93-650-41-003 115-97-650-41-003 115-99-650-41-003 Fig. 69 63.5 15.24 17.7

No. Insulator

of Order Codes dimen-

poles sions

Plating 91 Plating 93 Plating 97 Plating 99 See ABC

page 51

B B

Fig. 1

Fig. 2

Products not available from stock. Please consult PRECI-DIP.

Series 116

Dual-in-line sockets interconnect

Open frame

Solder tail

For mechanical and elec-

trical interconnection and

stacking of PCBs

Other platings and

heights on request

Insertion characteristics:

4-finger standard

Platings Sleeve Clip Pin

93 5 µm Sn Pb 0.75 µm Au

Ordering information

For complete part number replace xxx with the code given in

the column corresponding to the required figure for L

10 116-93-210-41-xxx 006 003 012 007 008 009 001 011 004 013 Fig. 1 12.6 5.08 7.6

4 116-93-304-41-xxx 006 003 012 007 008 009 001 011 004 013 Fig. 2 5.0 7.62 10.1

6 116-93-306-41-xxx 006 003 012 007 008 009 001 011 004 013 Fig. 3 7.6 7.62 10.1

8 116-93-308-41-xxx 006 003 012 007 008 009 001 011 004 013 Fig. 4 10.1 7.62 10.1

10 116-93-310-41-xxx 006 003 012 007 008 009 001 011 004 013 Fig. 5 12.6 7.62 10.1

12 116-93-312-41-xxx 006 003 012 007 008 009 001 011 004 013 aFig. 5a 15.2 7.62 10.1

14 116-93-314-41-xxx 006 003 012 007 008 009 001 011 004 013 Fig. 6 17.7 7.62 10.1

16 116-93-316-41-xxx 006 003 012 007 008 009 001 011 004 013 Fig. 7 20.3 7.62 10.1

18 116-93-318-41-xxx 006 003 012 007 008 009 001 011 004 013 Fig. 8 22.8 7.62 10.1

20 116-93-320-41-xxx 006 003 012 007 008 009 001 011 004 013 Fig. 9 25.3 7.62 10.1

22 116-93-322-41-xxx 006 003 012 007 008 009 001 011 004 013 Fig. 10 27.8 7.62 10.1

24 116-93-324-41-xxx 006 003 012 007 008 009 001 011 004 013 Fig. 11 30.4 7.62 10.1

28 116-93-328-41-xxx 006 003 012 007 008 009 001 011 004 013 Fig. 12 35.5 7.62 10.1

20 116-93-420-41-xxx 006 003 012 007 008 009 001 011 004 013 aFig. 12a 25.3 10.16 12.6

22 116-93-422-41-xxx 006 003 012 007 008 009 001 011 004 013 Fig. 13 27.8 10.16 12.6

24 116-93-424-41-xxx 006 003 012 007 008 009 001 011 004 013 Fig. 14 30.4 10.16 12.6

28 116-93-428-41-xxx 006 003 012 007 008 009 001 011 004 013 Fig. 15 35.5 10.16 12.6

32 116-93-432-41-xxx 006 003 012 007 008 009 001 011 004 013 Fig. 16 40.6 10.16 12.6

10 116-93-610-41-xxx 006 003 012 007 008 009 001 011 004 013 aFig. 16a 12.6 15.24 17.7

24 116-93-624-41-xxx 006 003 012 007 008 009 001 011 004 013 Fig. 17 30.4 15.24 17.7

28 116-93-628-41-xxx 006 003 012 007 008 009 001 011 004 013 Fig. 18 35.5 15.24 17.7

32 116-93-632-41-xxx 006 003 012 007 008 009 001 011 004 013 Fig. 19 40.6 15.24 17.7

36 116-93-636-41-xxx 006 003 012 007 008 009 001 011 004 013 Fig. 20 45.7 15.24 17.7

40 116-93-640-41-xxx 006 003 012 007 008 009 001 011 004 013 Fig. 21 50.6 15.24 17.7

42 116-93-642-41-xxx 006 003 012 007 008 009 001 011 004 013 Fig. 22 53.2 15.24 17.7

48 116-93-648-41-xxx 006 003 012 007 008 009 001 011 004 013 Fig. 23 60.9 15.24 17.7

50 116-93-650-41-xxx 006 003 012 007 008 009 001 011 004 013 Fig. 24 63.4 15.24 17.7

52 116-93-652-41-xxx 006 003 012 007 008 009 001 011 004 013 Fig. 25 65.9 15.24 17.7

50 116-93-950-41-xxx 006 003 012 007 008 009 001 011 004 013 Fig. 26 63.4 22.86 25.3

52 116-93-952-41-xxx 006 003 012 007 008 009 001 011 004 013 Fig. 27 65.9 22.86 25.3

64 116-93-964-41-xxx 006 003 012 007 008 009 001 011 004 013 Fig. 28 81.1 22.86 25.3

No. Order Codes Insulator

of dimen-

poles Plating 93 sions

L = 6 8 9 10 12 13 15 18 22 33 See ABC

mm mm mm mm mm mm mm mm mm mm page 50

Series 110…105 / 114…117 /

150…106

Dual-in-line sockets and headers

Open frame / surface mount

Specially designed for

reflow soldering including

vapor phase.

Insertion characteristics:

receptacle 4-finger

standard

New:

Pin connectors with

selective plated precision

screw machined pin,

plating code Z1.

Connecting side 1:

gold plated

soldering/PCB side 2:

tin plated

Platings Sleeve Clip Pin

91 5 µm Sn Pb 0.25 µm Au

99 5 µm Sn Pb 5 µm Sn Pb

90 5 µm Sn Pb

Z1 1: 0.25 µm Au

2: 5 µm Sn Pb

Ordering information

Replace xx with required plating code. Other platings on request

Series 110-xx-xxx-41-105 and 150-xx-xxx-00-106 with gull wing

terminals for maximum strength and easy in-circuit test

Series 114-xx-xxx-41-117 with floating contacts compensate

effects of unevenly dispensed solder paste

10 110-xx-210-41-105 114-xx-210-41-117 150-xx-210-00-106 Fig. 1 12.6 5.08 7.6

4 110-xx-304-41-105 114-xx-304-41-117 150-xx-304-00-106 Fig. 2 5.0 7.62 10.1

6 110-xx-306-41-105 114-xx-306-41-117 150-xx-306-00-106 Fig. 3 7.6 7.62 10.1

8 110-xx-308-41-105 114-xx-308-41-117 150-xx-308-00-106 Fig. 4 10.1 7.62 10.1

10 110-xx-310-41-105 114-xx-310-41-117 150-xx-310-00-106 Fig. 5 12.6 7.62 10.1

14 110-xx-314-41-105 114-xx-314-41-117 150-xx-314-00-106 Fig. 6 17.7 7.62 10.1

16 110-xx-316-41-105 114-xx-316-41-117 150-xx-316-00-106 Fig. 7 20.3 7.62 10.1

18 110-xx-318-41-105 114-xx-318-41-117 150-xx-318-00-106 Fig. 8 22.8 7.62 10.1

20 110-xx-320-41-105 114-xx-320-41-117 150-xx-320-00-106 Fig. 9 25.3 7.62 10.1

22 110-xx-322-41-105 114-xx-322-41-117 150-xx-322-00-106 Fig. 10 27.8 7.62 10.1

24 110-xx-324-41-105 114-xx-324-41-117 150-xx-324-00-106 Fig. 11 30.4 7.62 10.18

28 110-xx-328-41-105 114-xx-328-41-117 150-xx-328-00-106 Fig. 12 35.5 7.62 10.1

22 110-xx-422-41-105 114-xx-422-41-117 150-xx-422-00-106 Fig. 13 27.8 10.16 12.6

24 110-xx-424-41-105 114-xx-424-41-117 150-xx-424-00-106 Fig. 14 30.4 10.16 12.6

28 110-xx-428-41-105 114-xx-428-41-117 150-xx-428-00-106 Fig. 15 35.5 10.16 12.6

32 110-xx-432-41-105 114-xx-432-41-117 150-xx-432-00-106 Fig. 16 40.6 10.16 12.6

24 110-xx-624-41-105 114-xx-624-41-117 150-xx-624-00-106 Fig. 17 30.4 15.24 17.7

28 110-xx-628-41-105 114-xx-628-41-117 150-xx-628-00-106 Fig. 18 35.5 15.24 17.7

32 110-xx-632-41-105 114-xx-632-41-117 150-xx-632-00-106 Fig. 19 40.6 15.24 17.7

36 110-xx-636-41-105 114-xx-636-41-117 150-xx-636-00-106 Fig. 20 45.7 15.24 17.7

40 110-xx-640-41-105 114-xx-640-41-117 150-xx-640-00-106 Fig. 21 50.6 15.24 17.7

42 110-xx-642-41-105 114-xx-642-41-117 150-xx-642-00-106 Fig. 22 53.2 15.24 17.7

48 110-xx-648-41-105 114-xx-648-41-117 150-xx-648-00-106 Fig. 23 60.9 15.24 17.7

No. Order Codes Insulator

of dimen-

poles Plating: see ordering information sions

Fig. 1 Fig. 2 Fig. 3 See ABC

page 50

For PCB Layout see page 60:

Fig. 4 Series 110 / 150,

Fig. 5 Series 114

Series 110…105161 /

114…161 / 150…106161

Dual-in-line sockets and headers / open

frame / surface mount pick and place

Specially designed for re-

flow soldering including

vapor phase.

Insertion characteristics:

receptacle 4-finger

standard

New:

Pin connectors with

selective plated precision

screw machined pin,

plating code Z1.

Connecting side 1:

gold plated

soldering/PCB side 2:

tin plated

Platings Sleeve Clip Pin

91 5 µm Sn Pb 0.25 µm Au

90 5 µm Sn Pb

Z1 1: 0.25 µm Au

2: 5 µm Sn Pb

Ordering information

Replace xx with required plating code. Other platings on request

Other pin counts please consult

8 110-xx-308-41-105161 114-xx-308-41-134161 150-xx-308-00-106161 Fig. 6 10.1 7.62 10.1 10.1

14 110-xx-314-41-105161 114-xx-314-41-134161 150-xx-314-00-106161 Fig. 6 17.8 7.62 10.1 5.3

16 110-xx-316-41-105161 114-xx-316-41-134161 150-xx-316-00-106161 Fig. 6 20.3 7.62 10.1 5.3

18 110-xx-318-41-105161 114-xx-318-41-134161 150-xx-318-00-106161 Fig. 6 22.9 7.62 10.1 5.3

20 110-xx-320-41-105161 114-xx-320-41-134161 150-xx-320-00-106161 Fig. 6 25.4 7.62 10.1 8.3

24 110-xx-324-41-105161 114-xx-324-41-134161 150-xx-324-00-106161 Fig. 6 30.4 7.62 10.1 8.3

28 110-xx-328-41-105161 114-xx-328-41-134161 150-xx-328-00-106161 Fig. 6 35.6 7.62 10.1 8.3

24 110-xx-624-41-105161 114-xx-624-41-117161 150-xx-624-00-106161 Fig. 7 30.4 15.24 17.7 7

28 110-xx-628-41-105161 114-xx-628-41-134161 150-xx-628-00-106161 Fig. 6 35.5 15.24 17.7 10.0

32 110-xx-632-41-105161 114-xx-632-41-134161 150-xx-632-00-106161 Fig. 6 40.6 15.24 17.7 10.0

40 110-xx-640-41-105161 114-xx-640-41-134161 150-xx-640-00-106161 Fig. 6 50.8 15.24 17.7 10.0

No. Order Codes

of Insulator

poles Plating: see ordering information dimensions

Fig. 1 / Fig. 4 Fig. 2 / Fig. 5 Fig. 3 / Fig. 4 See A B C E G

PCB layout Insulator

Series 117 / 217

Shrinkdip sockets

Open and closed frame

Solder tail

High density Dual-in-line

sockets for devices fea-

turing 0.07′′ (1.778 mm)

lead spacing. Four-finger

beryllium copper contact

meets high vibration and

shock requirements

Insertion characteristics:

4-finger standard

Platings Sleeve Clip Pin

91 5 µm Sn Pb 0.25 µm Au

93 5 µm Sn Pb 0.75 µm Au

97 5 µm Sn Pb Goldflash

99 5 µm Sn Pb 5 µm Sn Pb

Ordering information

For complete part number see Order Codes list below

Open frame 117

16 117-91-316-41-005 117-93-316-41-005 117-97-316-41-005 117-99-316-41-005 Fig. 70 14.607.62 10.16

28 117-91-428-41-005 117-93-428-41-005 117-97-428-41-005 117-99-428-41-005 Fig. 71 25.2010.16 12.70

30 117-91-430-41-005 117-93-430-41-005 117-97-430-41-005 117-99-430-41-005 aFig. 71a 27.0010.16 12.70

32 117-91-432-41-005 117-93-432-41-005 117-97-432-41-005 117-99-432-41-005 bFig. 71b 28.8010.16 12.70

48 117-91-448-41-005 117-93-448-41-005 117-97-448-41-005 117-99-448-41-005 Fig. 72 43.0010.16 12.70

20 117-91-620-41-005 117-93-620-41-005 117-97-620-41-005 117-99-620-41-005 Fig. 81 18.1015.24 17.78

24 117-91-624-41-005 117-93-624-41-005 117-97-624-41-005 117-99-624-41-005 Fig. 82 21.55 15.24 17.64

28 117-91-628-41-005 117-93-628-41-005 117-97-628-41-005 117-99-628-41-005 Fig. 73 25.2015.24 17.78

40 117-91-640-41-005 117-93-640-41-005 117-97-640-41-005 117-99-640-41-005 Fig. 74 35.9015.24 17.78

42 117-91-642-41-005 117-93-642-41-005 117-97-642-41-005 117-99-642-41-005 Fig. 75 37.7015.24 17.78

48 117-91-648-41-005 117-93-648-41-005 117-97-648-41-005 117-99-648-41-005 Fig. 76 43.1015.24 17.78

52 117-91-652-41-005 117-93-652-41-005 117-97-652-41-005 117-99-652-41-005 Fig. 77 46.6015.24 17.78

56 117-91-656-41-005 117-93-656-41-005 117-97-656-41-005 117-99-656-41-005 aFig. 77a 50.0015.24 17.78

64 117-91-664-41-005 117-93-664-41-005 117-97-664-41-005 117-99-664-41-005 Fig. 78 57.2015.24 17.78

68 117-91-668-41-005 117-93-668-41-005 117-97-668-41-005 117-99-668-41-005 Fig. 79 60.8015.24 17.78

64 117-91-764-41-005 117-93-764-41-005 117-97-764-41-005 117-99-764-41-005 Fig. 80 57.4019.05 21.59

Closed frame 217

64 217-91-764-41-005 217-93-764-41-005 217-97-764-41-005 217-99-764-41-005 Fig. 90 57.4019.05 21.59

No. Insulator

of Order Codes dimen-

poles sions

Plating 91 Plating 93 Plating 97 Plating 99 See ABC

page 52

Products not available from stock. Please consult PRECI-DIP.

Series 121 / 122 / 123 / 124

Dual-in-line sockets

Open frame

Wire-wrap 1 / 2 / 3 / 4 level

Solderless wire-wrap ter-

minals are firmly locked in

the insulator body to

withstand torque of

wrapping tool

Length of terminal for

one-level wrapping

two-level wrapping

three-level wrapping

four-level wrapping

Insertion characteristics:

4-finger standard

Platings Sleeve Clip Pin

13 0.25 µm Au 0.75 µm Au

91 5 µm Sn Pb 0.25 µm Au

93 5 µm Sn Pb 0.75 µm Au

99 5 µm Sn Pb 5 µm Sn Pb

Ordering information

For standard versions see table (order codes)

Platings available:

Series 121: 93 122: 13, 91, 93, 99

123: 13, 91, 93, 99 124: 93

Replace xx with required plating code

10 121-93-210-41-001 122-xx-210-41-001 123-xx-210-41-001 124-93-210-41-002 Fig. 1 12.6 5.08 7.6

4 121-93-304-41-001 122-xx-304-41-001 123-xx-304-41-001 124-93-304-41-002 Fig. 2 5.0 7.62 10.1

6 121-93-306-41-001 122-xx-306-41-001 123-xx-306-41-001 124-93-306-41-002 Fig. 3 7.6 7.62 10.1

8 121-93-308-41-001 122-xx-308-41-001 123-xx-308-41-001 124-93-308-41-002 Fig. 4 10.1 7.62 10.1

10 121-93-310-41-001 122-xx-310-41-001 123-xx-310-41-001 124-93-310-41-002 Fig. 5 12.6 7.62 10.1

12 121-93-312-41-001 122-xx-312-41-001 123-xx-312-41-001 124-93-312-41-002 aFig. 5a 15.2 7.62 10.1

14 121-93-314-41-001 122-xx-314-41-001 123-xx-314-41-001 124-93-314-41-002 Fig. 6 17.7 7.62 10.1

16 121-93-316-41-001 122-xx-316-41-001 123-xx-316-41-001 124-93-316-41-002 Fig. 7 20.3 7.62 10.1

18 121-93-318-41-001 122-xx-318-41-001 123-xx-318-41-001 124-93-318-41-002 Fig. 8 22.8 7.62 10.1

20 121-93-320-41-001 122-xx-320-41-001 123-xx-320-41-001 124-93-320-41-002 Fig. 9 25.3 7.62 10.1

22 121-93-322-41-001 122-xx-322-41-001 123-xx-322-41-001 124-93-322-41-002 Fig. 10 27.8 7.62 10.1

24 121-93-324-41-001 122-xx-324-41-001 123-xx-324-41-001 124-93-324-41-002 Fig. 11 30.4 7.62 10.1

28 121-93-328-41-001 122-xx-328-41-001 123-xx-328-41-001 124-93-328-41-002 Fig. 12 35.5 7.62 10.1

20 121-93-420-41-001 122-xx-420-41-001 123-xx-420-41-001 124-93-420-41-002 aFig. 12a 25.3 10.16 12.6

22 121-93-422-41-001 122-xx-422-41-001 123-xx-422-41-001 124-93-422-41-002 Fig. 13 27.8 10.16 12.6

24 121-93-424-41-001 122-xx-424-41-001 123-xx-424-41-001 124-93-424-41-002 Fig. 14 30.4 10.16 12.6

28 121-93-428-41-001 122-xx-428-41-001 123-xx-428-41-001 124-93-428-41-002 Fig. 15 35.5 10.16 12.6

32 121-93-432-41-001 122-xx-432-41-001 123-xx-432-41-001 124-93-432-41-002 Fig. 16 40.6 10.16 12.6

10 121-93-610-41-001 122-xx-610-41-001 123-xx-610-41-001 124-93-610-41-001 aFig. 16a 12.6 15.24 17.7

24 121-93-624-41-001 122-xx-624-41-001 123-xx-624-41-001 124-93-624-41-002 Fig. 17 30.4 15.24 17.7

28 121-93-628-41-001 122-xx-628-41-001 123-xx-628-41-001 124-93-628-41-002 Fig. 18 35.5 15.24 17.7

32 121-93-632-41-001 122-xx-632-41-001 123-xx-632-41-001 124-93-632-41-002 Fig. 19 40.6 15.24 17.7

36 121-93-636-41-001 122-xx-636-41-001 123-xx-636-41-001 124-93-636-41-002 Fig. 20 45.7 15.24 17.7

40 121-93-640-41-001 122-xx-640-41-001 123-xx-640-41-001 124-93-640-41-002 Fig. 21 50.6 15.24 17.7

42 121-93-642-41-001 122-xx-642-41-001 123-xx-642-41-001 124-93-642-41-002 Fig. 22 53.2 15.24 17.7

48 121-93-648-41-001 122-xx-648-41-001 123-xx-648-41-001 124-93-648-41-002 Fig. 23 60.9 15.24 17.7

50 121-93-650-41-001 122-xx-650-41-001 123-xx-650-41-001 124-93-650-41-002 Fig. 24 63.4 15.24 17.7

52 121-93-652-41-001 122-xx-652-41-001 123-xx-652-41-001 124-93-652-41-002 Fig. 25 65.9 15.24 17.7

50 121-93-950-41-001 122-xx-950-41-001 123-xx-950-41-001 124-93-950-41-002 Fig. 26 63.4 22.86 25.3

52 121-93-952-41-001 122-xx-952-41-001 123-xx-952-41-001 124-93-952-41-002 Fig. 27 65.9 22.86 25.3

64 121-93-964-41-001 122-xx-964-41-001 123-xx-964-41-001 124-93-964-41-002 Fig. 28 81.1 22.86 25.3

No. Order Codes Insulator

of dimen-

poles Plating: see ordering information sions

WW-1 level WW-2 levels WW-3 levels WW-4 levels See ABC

L = 6.6 mm L = 9.40 mm L = 12.95 mm L = 16 mm page 50

B B B

Products not available from stock. Please consult PRECI-DIP.

Series 210

Dual-in-line sockets

Closed frame

Solder tail

Closed frame “solid” in-

sulator withstands high

mechanical impact. Low

profile

Available with series 10

standard pins, other types

on request

Insertion characteristics:

4-finger standard

Platings Sleeve Clip Pin

91 5 µm Sn Pb 0.25 µm Au

93 5 µm Sn Pb 0.75 µm Au

97 5 µm Sn Pb Goldflash

99 5 µm Sn Pb 5 µm Sn Pb

Ordering information

For complete part number see Order Codes list below

6 210-91-306-41-001 210-93-306-41-001 210-97-306-41-001 210-99-306-41-001 Fig. 30 7.6 7.62 10.10

8 210-91-308-41-001 210-93-308-41-001 210-97-308-41-001 210-99-308-41-001 Fig. 31 10.1 7.62 10.10

10 210-91-310-41-001 210-93-310-41-001 210-97-310-41-001 210-99-310-41-001 Fig. 32 12.6 7.62 10.10

14 210-91-314-41-001 210-93-314-41-001 210-97-314-41-001 210-99-314-41-001 Fig. 33 17.7 7.62 10.10

16 210-91-316-41-001 210-93-316-41-001 210-97-316-41-001 210-99-316-41-001 Fig. 34 20.3 7.62 10.10

18 210-91-318-41-001 210-93-318-41-001 210-97-318-41-001 210-99-318-41-001 Fig. 35 22.8 7.62 10.10

20 210-91-320-41-001 210-93-320-41-001 210-97-320-41-001 210-99-320-41-001 Fig. 36 25.3 7.62 10.10

24 210-91-324-41-001 210-93-324-41-001 210-97-324-41-001 210-99-324-41-001 Fig. 37 30.4 7.62 10.10

22 210-91-422-41-001 210-93-422-41-001 210-97-422-41-001 210-99-422-41-001 Fig. 38 27.8 10.16 12.60

24 210-91-424-41-001 210-93-424-41-001 210-97-424-41-001 210-99-424-41-001 Fig. 39 30.4 10.16 12.60

24 210-91-624-41-001 210-93-624-41-001 210-97-624-41-001 210-99-624-41-001 Fig. 40 30.4 15.24 17.70

28 210-91-628-41-001 210-93-628-41-001 210-97-628-41-001 210-99-628-41-001 Fig. 41 35.5 15.24 17.70

32 210-91-632-41-001 210-93-632-41-001 210-97-632-41-001 210-99-632-41-001 Fig. 42 40.6 15.24 17.70

36 210-91-636-41-001 210-93-636-41-001 210-97-636-41-001 210-99-636-41-001 Fig. 43 45.7 15.24 17.70

40 210-91-640-41-001 210-93-640-41-001 210-97-640-41-001 210-99-640-41-001 Fig. 44 50.6 15.24 17.70

48 210-91-648-41-001 210-93-648-41-001 210-97-648-41-001 210-99-648-41-001 Fig. 45 61.0 15.24 17.64

No. Insulator

of Order Codes dimen-

poles sions

Plating 91 Plating 93 Plating 97 Plating 99 See ABC

page 51

B B B B

Products not available from stock. Please consult PRECI-DIP.

Series 146

Dual-in-line sockets

Open frame

Press-fit with compliant pins

Press-fit sockets for sol-

derless mount into PCB.

For plated-thru-holes

∅1 (+0.09/–0.06) mm

Compliant pins

New press-fit receptacle

with modified eye of the

needle which eliminates

damage to the plated-

thru-holes

Platings Sleeve Clip Pin

91 5 µm Sn Pb 0.25 µm Au

93 5 µm Sn Pb 0.75 µm Au

99 5 µm Sn Pb 5 µm Sn Pb

Ordering information

For standard versions see table (order codes)

Option:

Platings 91, 93 and 99 available for all versions

Replace xx with requested plating code

(Older versions 146…012/013/019 please consult)

6 146-xx-306-41-036 146-xx-306-41-035 Fig. 3 7.6 7.62 10.1

8 146-xx-308-41-036 146-xx-308-41-035 Fig. 4 10.1 7.62 10.1

14 146-xx-314-41-036 146-xx-314-41-035 Fig. 6 17.7 7.62 10.1

16 146-xx-316-41-036 146-xx-316-41-035 Fig. 7 20.3 7.62 10.1

18 146-xx-318-41-036 146-xx-318-41-035 Fig. 8 22.8 7.62 10.1

20 146-xx-320-41-036 146-xx-320-41-035 Fig. 9 25.3 7.62 10.1

22 146-xx-422-41-036 146-xx-422-41-035 Fig. 13 27.8 10.16 12.6

24 146-xx-624-41-036 146-xx-624-41-035 Fig. 17 30.4 15.24 17.7

28 146-xx-628-41-036 146-xx-628-41-035 Fig. 18 35.5 15.24 17.7

32 146-xx-632-41-036 146-xx-632-41-035 Fig. 19 40.6 15.24 17.7

40 146-xx-640-41-036 146-xx-640-41-035 Fig. 21 50.6 15.24 17.7

No. Insulator

of Order Codes dimen-

poles sions

See ABC

page 44

For PCB thickness For PCB thickness

1.5 to 2.0 mm 2.1 to 3.2 mm

D = 2.80 mm D = 3.80 mm

Series 612

Dual-in-line pin carrier assemblies

Open frame

Solder tail

Pin carrier assemblies as-

sure maximum ventilation

and better visibility for

inspection and repair

Easy mounting due to the

disposable plastic carrier.

No solder or flux wicking

problems

Insertion characteristics:

4-finger standard

Platings Sleeve Clip Pin

91 5 µm Sn Pb 0.25 µm Au

93 5 µm Sn Pb 0.75 µm Au

99 5 µm Sn Pb 5 µm Sn Pb

Ordering information

For complete part number see Order Codes list below

10 612-91-210-41-001 612-93-210-41-001 612-99-210-41-001 Fig. 1 12.6 5.08 7.6

4 612-91-304-41-001 612-93-304-41-001 612-99-304-41-001 Fig. 2 5.0 7.62 10.1

6 612-91-306-41-001 612-93-306-41-001 612-99-306-41-001 Fig. 3 7.6 7.62 10.1

8 612-91-308-41-001 612-93-308-41-001 612-99-308-41-001 Fig. 4 10.1 7.62 10.1

10 612-91-310-41-001 612-93-310-41-001 612-99-310-41-001 Fig. 5 12.6 7.62 10.1

12 612-91-312-41-001 612-93-312-41-001 612-99-312-41-001 aFig. 5a 15.2 7.62 10.1

14 612-91-314-41-001 612-93-314-41-001 612-99-314-41-001 Fig. 6 17.7 7.62 10.1

16 612-91-316-41-001 612-93-316-41-001 612-99-316-41-001 Fig. 7 20.3 7.62 10.1

18 612-91-318-41-001 612-93-318-41-001 612-99-318-41-001 Fig. 8 22.8 7.62 10.1

20 612-91-320-41-001 612-93-320-41-001 612-99-320-41-001 Fig. 9 25.3 7.62 10.1

22 612-91-322-41-001 612-93-322-41-001 612-99-322-41-001 Fig. 10 27.8 7.62 10.1

24 612-91-324-41-001 612-93-324-41-001 612-99-324-41-001 Fig. 11 30.4 7.62 10.1

28 612-91-328-41-001 612-93-328-41-001 612-99-328-41-001 Fig. 12 35.5 7.62 10.1

20 612-91-420-41-001 612-93-420-41-001 612-99-420-41-001 aFig. 12a 25.3 10.16 12.6

22 612-91-422-41-001 612-93-422-41-001 612-99-422-41-001 Fig. 13 27.8 10.16 12.6

24 612-91-424-41-001 612-93-424-41-001 612-99-424-41-001 Fig. 14 30.4 10.16 12.6

28 612-91-428-41-001 612-93-428-41-001 612-99-428-41-001 Fig. 15 35.5 10.16 12.6

32 612-91-432-41-001 612-93-432-41-001 612-99-432-41-001 Fig. 16 40.6 10.16 12.6

10 612-91-610-41-001 612-93-610-41-001 612-99-610-41-001 aFig. 16a 12.6 15.24 17.7

24 612-91-624-41-001 612-93-624-41-001 612-99-624-41-001 Fig. 17 30.4 15.24 17.7

28 612-91-628-41-001 612-93-628-41-001 612-99-628-41-001 Fig. 18 35.5 15.24 17.7

32 612-91-632-41-001 612-93-632-41-001 612-99-632-41-001 Fig. 19 40.6 15.24 17.7

36 612-91-636-41-001 612-93-636-41-001 612-99-636-41-001 Fig. 20 45.7 15.24 17.7

40 612-91-640-41-001 612-93-640-41-001 612-99-640-41-001 Fig. 21 50.6 15.24 17.7

42 612-91-642-41-001 612-93-642-41-001 612-99-642-41-001 Fig. 22 53.2 15.24 17.7

48 612-91-648-41-001 612-93-648-41-001 612-99-648-41-001 Fig. 23 60.9 15.24 17.7

50 612-91-650-41-001 612-93-650-41-001 612-99-650-41-001 Fig. 24 63.4 15.24 17.7

52 612-91-652-41-001 612-93-652-41-001 612-99-652-41-001 Fig. 25 65.9 15.24 17.7

50 612-91-950-41-001 612-93-950-41-001 612-99-950-41-001 Fig. 26 63.4 22.86 25.3

52 612-91-952-41-001 612-93-952-41-001 612-99-952-41-001 Fig. 27 65.9 22.86 25.3

64 612-91-964-41-001 612-93-964-41-001 612-99-964-41-001 Fig. 28 81.1 22.86 25.3

No. Insulator

of Order Codes dimen-

poles sions

Plating 91 Plating 93 Plating 99 See ABC

page 50

Series 614

Dual-in-line pin carrier assemblies

Low profile / low profile ultra thin

Solder tail

Pin carrier assemblies as-

sure maximum ventilation

and better visibility for

inspection and repair

Easy mounting due to the

disposable plastic carrier.

No solder or flux wicking

problems

Low profile:

Insertion characteristics:

4-finger standard

Low profile ultra thin:

Requires 1 mm diameter

holes in PCB.

Insertion characteristics:

3-finger

Platings Sleeve Clip Pin

91 5 µm Sn Pb 0.25 µm Au

93 5 µm Sn Pb 0.75 µm Au

99 5 µm Sn Pb 5 µm Sn Pb

Ordering information

For standard versions see table (order codes)

Platings available:

Low profile: 614…-41-001: 91, 93, 99

Ultra thin: 614…-31-012: 91, 93, 99

Replace xx with required plating code

10 614-xx-210-41-001 614-xx-210-31-012 Fig. 1 12.6 5.08 7.6

4 614-xx-304-41-001 614-xx-304-31-012 Fig. 2 5.0 7.62 10.1

6 614-xx-306-41-001 614-xx-306-31-012 Fig. 3 7.6 7.62 10.1

8 614-xx-308-41-001 614-xx-308-31-012 Fig. 4 10.1 7.62 10.1

10 614-xx-310-41-001 614-xx-310-31-012 Fig. 5 12.6 7.62 10.1

12 614-xx-312-41-001 614-xx-312-31-012 aFig. 5a 15.2 7.62 10.1

14 614-xx-314-41-001 614-xx-314-31-012 Fig. 6 17.7 7.62 10.1

16 614-xx-316-41-001 614-xx-316-31-012 Fig. 7 20.3 7.62 10.1

18 614-xx-318-41-001 614-xx-318-31-012 Fig. 8 22.8 7.62 10.1

20 614-xx-320-41-001 614-xx-320-31-012 Fig. 9 25.3 7.62 10.1

22 614-xx-322-41-001 614-xx-322-31-012 Fig. 10 27.8 7.62 10.1

24 614-xx-324-41-001 614-xx-324-31-012 Fig. 11 30.4 7.62 10.1

28 614-xx-328-41-001 614-xx-328-31-012 Fig. 12 35.5 7.62 10.1

20 614-xx-420-41-001 614-xx-420-31-012 aFig. 12a 25.3 10.16 12.6

22 614-xx-422-41-001 614-xx-422-31-012 Fig. 13 27.8 10.16 12.6

24 614-xx-424-41-001 614-xx-424-31-012 Fig. 14 30.4 10.16 12.6

28 614-xx-428-41-001 614-xx-428-31-012 Fig. 15 35.5 10.16 12.6

32 614-xx-432-41-001 614-xx-432-31-012 Fig. 16 40.6 10.16 12.6

10 614-xx-610-41-001 614-xx-610-31-012 aFig. 16a 12.6 15.24 17.7

24 614-xx-624-41-001 614-xx-624-31-012 Fig. 17 30.4 15.24 17.7

28 614-xx-628-41-001 614-xx-628-31-012 Fig. 18 35.5 15.24 17.7

32 614-xx-632-41-001 614-xx-632-31-012 Fig. 19 40.6 15.24 17.7

36 614-xx-636-41-001 614-xx-636-31-012 Fig. 20 45.7 15.24 17.7

40 614-xx-640-41-001 614-xx-640-31-012 Fig. 21 50.6 15.24 17.7

42 614-xx-642-41-001 614-xx-642-31-012 Fig. 22 53.2 15.24 17.7

48 614-xx-648-41-001 614-xx-648-31-012 Fig. 23 60.9 15.24 17.7

50 614-xx-650-41-001 614-xx-650-31-012 Fig. 24 63.4 15.24 17.7

52 614-xx-652-41-001 614-xx-652-31-012 Fig. 25 65.9 15.24 17.7

50 614-xx-950-41-001 614-xx-950-31-012 Fig. 26 63.4 22.86 25.3

52 614-xx-952-41-001 614-xx-952-31-012 Fig. 27 65.9 22.86 25.3

64 614-xx-964-41-001 614-xx-964-31-012 Fig. 28 81.1 22.86 25.3

No. Order Codes Insulator

of dimen-

poles Platings: see ordering information sions

Fig. 1 Fig. 2 See ABC

page 50

Fig. 1 Fig. 2

Series 110…41-801

Dual-in-line sockets with capacitor

Open frame

Solder tail

With ceramic multilayer

decoupling capacitor 100

nF ± 20% / 50 V, epoxy

encapsulated

Temperature

range: –25°C to +85°C

Insertion characteristics:

4-finger standard

Platings Sleeve Clip Pin

93 5 µm Sn Pb 0.75 µm Au

Ordering information

For standard versions see table (order codes)

Option:

3 level wraposts (please consult)

8 110-93-308-41-801 Fig. 4 10.1 7.62 10.1

14 110-93-314-41-801 Fig. 6 17.7 7.62 10.1

16 110-93-316-41-801 Fig. 7 20.3 7.62 10.1

18 110-93-318-41-801 Fig. 8 22.8 7.62 10.1

20 110-93-320-41-801 Fig. 9 25.3 7.62 10.1

22 110-93-322-41-801 Fig. 10 27.8 7.62 10.1

24 110-93-324-41-801 Fig. 11 30.4 7.62 10.1

22 110-93-422-41-801 Fig. 13 27.8 10.16 12.6

24 110-93-624-41-801 Fig. 17 30.4 15.24 17.7

28 110-93-628-41-801 Fig. 18 35.5 15.24 17.7

32 110-93-632-41-801 Fig. 19 40.6 15.24 17.7

40 110-93-640-41-801 Fig. 21 50.6 15.24 17.7

No. Insulator

of Order Codes dimen-

poles sions

Plating 93 See ABC

page 50

68 Product information

NEW COMPLIANT PRESS-FIT TECHNOLOGY

Based on an adaptation of the well known «eye-of-the-needle» principle, Preci-Dip’s new

compliant press-fit contact termination’s introduce major improvements to this increasingly

popular, cost-effective technology.

The solid, precision machined contacts are made of special bronze alloy, and have a very

smooth surface with a homogeneous, carefully controlled tin protection. They fully comply with

IEC 352 T5.

Thanks to the optimised geometry, Preci-Dip press-fit contacts offer a reduced insertion force

without loosing specific pressure in the contact zone, making a reliable, gas-tight connection to

the PCB hole metallisation, without peeling off effect. With 1.5 mm PCB the average push-in

forces are about 50 N and the average push-out forces about 45 N, both measured with a 1 mm

diameter hole.

The standard contacts are available for hole diameters 1 +0.09/–0.06 mm, and PCB thickness

from 1.5 to 4.5 mm. Version for smaller holes, especially suitable for reduced pitch applications

like 2 mm connectors or interstitial PGAs are now available; they fit with hole dimensions 0.9

+0.07/–0.05 mm and 0.71 +/–0.06 mm.

The specific manufacturing process allow us to make press-fit tails on almost all our product

lines for socket contacts and pin contacts; these one are available in a selective plated version

with contact body and press-fit tail tin plated and connecting pin gold plated.

Technical specifications

Materials

– Insulator: Glass filled thermoplastic polyester, self extin-

guishing UL 94 V-0, colour black, resistant to mineral acids,

solvents, greases, oils (short time).

– Receptacle contact:

– Sleeve: Screw-machined brass (QQ-B-626), gold or tin-lead

plated (90/10) over 2–3 µm nickel

– Clip: Stamped beryllium-copper (QQ-C-533), gold or tin-

lead (90/10) plated over 2–3 µm nickel

– Pin contact: Screw-machined brass (QQ-B-626) or phosphor

bronze (QQ-B-750), gold or tin-lead plated (90/10) over

2–3 µm nickel

Mechanical data

– Insertion characteristics

(measured with a polished steel gauge, typical values):

– Type of clip (finger): 4 6

standard low force

– Gauge diameter (mm): 0.43 0.46

– Insertion force (N): 1.8 0.6

– Withdrawal force (N): 0.9 0.3

– Mechanical life: min. 100 cycles

Electrical data

– Rated current: 1 A

– Rated voltage: 100 VRMS / 150 VDC

– Contact resistance: 10 mΩmax.

– Insulation resistance: 10 000 MΩmin.

– Dielectric strength: 1000 VRMS min.

– Air and creepage distances: 0.6 mm

– Capacitance: 0.3 pF max.

Environmental data

– Operating temperature: –55/+125°C

– Vibration

(10–2000 Hz, 15 g): no electrical discontinuity > 1 µs

– Shock: (50 g): no electrical discontinuity > 1 µs

– Solderability

(IEC 68-2-54 Ta): 235°C, 5 s

– Resistance to soldering heat:

(IEC 68-2-20 Tb): 260°C, 5 s

– Resistance to atmospheric

corrosion: IEC 68-2-42 and 43

– Climatic category (IEC): 55/125/21

Specific products

Series 110 / 410 / 510

Sockets for specific applications

Solder tail

Quad-in-line sockets and staggered (zig-zag) strips are suitable

for IC's with staggered double row Dual-in-line type pin

patterns. (e.g. NEC, etc…).

Double row staggered strips will also accommodate single-in-

line zig-zag memory packages on high density boards.

Display sockets

Insertion characteristics:

Partially equipped DIL and staggered strips: 4-finger standard

Quad-in-line and Display sockets: 6-finger low force

Ordering information

Replace 9xwith required plating code, e.g. 410-9x-214-10-001

for a 5 µm Sn Pb / 0.75 µm Au becomes 410-93-214-10-001

110-xx-314-10-001 fig. 1

110-xx-314-10-002 fig. 2

110-xx-316-10-003 fig. 3

Partially equipped DIL sockets

Insulator body dimensions see

page 50

Please consult for versions not

shown

110-91-064-01-505

110-93-064-01-505

110-97-064-01-505

110-99-064-01-505

Quad-in-line socket

Rockwell packages with 2.22 mm

nominal row distance can also be

inserted

Important: Quad-in-line sockets

require a PCB drilling pattern

with 2.54 mm centerline distance

410-xx-214-10-001 left

410-xx-214-10-002 right

410-xx-216-10-001 left

410-xx-216-10-002 right

410-xx-220-10-001 left

410-xx-220-10-002 right

410-xx-224-10-001 left

410-xx-224-10-002 right

410-xx-228-10-001 left

410-xx-228-10-002 right

Staggered zig-zag strips

Not stackable A: 18.98 C: 4.94

Not stackable 18.98 4.94

Stackable 21.52 4.94

Stackable 26.60 4.94

Stackable 31.68 4.94

Stackable 36.76 4.94

510-91-010-01-504101 Fig. 1

510-97-010-01-504101

510-99-010-01-783101

510-91-018-01-504101

510-97-018-01-504101 Fig. 2

510-99-018-01-783101

Display sockets for 7 segment

displays (1 or 2 digits)

Platings Sleeve Clip Pin

91 5 µm Sn Pb 0.25 µm Au

93 5 µm Sn Pb 0.75 µm Au

97 5 µm Sn Pb Goldflash

99 5 µm Sn Pb 5 µm Sn Pb

Fig. 1

Fig. 3

Fig. 2

002

right

001

left

Fig. 1 Fig. 2

Series 126

Dual-in-line sockets

Open frame

Wire-wrap posts with solder tails

This socket is equipped

with contacts combining

two connection tech-

niques: up to three-level

wrapping plus PCB sold-

ering

Also suitable for use as an

interconnect socket with

intermediate wire-wrap

connections. Custom

lengths on request

Insertion characteristics:

4-finger standard

Platings Sleeve Clip Pin

93 5 µm Sn Pb 0.75 µm Au

Ordering information

For complete part number see Order Codes list below

10 126-93-210-41-001 126-93-210-41-002 126-93-210-41-003 Fig. 1 12.6 5.08 7.6

4 126-93-304-41-001 126-93-304-41-002 126-93-304-41-003 Fig. 2 5.0 7.62 10.1

6 126-93-306-41-001 126-93-306-41-002 126-93-306-41-003 Fig. 3 7.6 7.62 10.1

8 126-93-308-41-001 126-93-308-41-002 126-93-308-41-003 Fig. 4 10.1 7.62 10.1

10 126-93-310-41-001 126-93-310-41-002 126-93-310-41-003 Fig. 5 12.6 7.62 10.1

12 126-93-312-41-001 126-93-312-41-002 126-93-312-41-003 aFig. 5a 15.2 7.62 10.1

14 126-93-314-41-001 126-93-314-41-002 126-93-314-41-003 Fig. 6 17.7 7.62 10.1

16 126-93-316-41-001 126-93-316-41-002 126-93-316-41-003 Fig. 7 20.3 7.62 10.1

18 126-93-318-41-001 126-93-318-41-002 126-93-318-41-003 Fig. 8 22.8 7.62 10.1

20 126-93-320-41-001 126-93-320-41-002 126-93-320-41-003 Fig. 9 25.3 7.62 10.1

22 126-93-322-41-001 126-93-322-41-002 126-93-322-41-003 Fig. 10 27.8 7.62 10.1

24 126-93-324-41-001 126-93-324-41-002 126-93-324-41-003 Fig. 11 30.4 7.62 10.1

28 126-93-328-41-001 126-93-328-41-002 126-93-328-41-003 Fig. 12 35.5 7.62 10.1

20 126-93-420-41-001 126-93-420-41-002 126-93-420-41-003 aFig. 12a 25.3 10.16 12.6

22 126-93-422-41-001 126-93-422-41-002 126-93-422-41-003 Fig. 13 27.8 10.16 12.6

24 126-93-424-41-001 126-93-424-41-002 126-93-424-41-003 Fig. 14 30.4 10.16 12.6

28 126-93-428-41-001 126-93-428-41-002 126-93-428-41-003 Fig. 15 35.5 10.16 12.6

32 126-93-432-41-001 126-93-432-41-002 126-93-432-41-003 Fig. 16 40.6 10.16 12.6

10 126-93-610-41-001 126-93-610-41-002 126-93-610-41-003 aFig. 16a 12.6 15.24 17.7

24 126-93-624-41-001 126-93-624-41-002 126-93-624-41-003 Fig. 17 30.4 15.24 17.7

28 126-93-628-41-001 126-93-628-41-002 126-93-628-41-003 Fig. 18 35.5 15.24 17.7

32 126-93-632-41-001 126-93-632-41-002 126-93-632-41-003 Fig. 19 40.6 15.24 17.7

36 126-93-636-41-001 126-93-636-41-002 126-93-636-41-003 Fig. 20 45.7 15.24 17.7

40 126-93-640-41-001 126-93-640-41-002 126-93-640-41-003 Fig. 21 50.6 15.24 17.7

42 126-93-642-41-001 126-93-642-41-002 126-93-642-41-003 Fig. 22 53.2 15.24 17.7

48 126-93-648-41-001 126-93-648-41-002 126-93-648-41-003 Fig. 23 60.9 15.24 17.7

50 126-93-650-41-001 126-93-650-41-002 126-93-650-41-003 Fig. 24 63.4 15.24 17.7

52 126-93-652-41-001 126-93-652-41-002 126-93-652-41-003 Fig. 25 65.9 15.24 17.7

50 126-93-950-41-001 126-93-950-41-002 126-93-950-41-003 Fig. 26 63.4 22.86 25.3

52 126-93-952-41-001 126-93-952-41-002 126-93-952-41-003 Fig. 27 65.9 22.86 25.3

64 126-93-964-41-001 126-93-964-41-002 126-93-964-41-003 Fig. 28 81.1 22.86 25.3

No. Order Codes Insulator

of dimen-

poles Plating 93 Plating 93 Plating 93 sions

L = 5.9 L = 8.9 L = 11.9 See ABC

1 Level 2 Level 3 Level page 50

B B B

Products not available from stock. Please consult PRECI-DIP.

Series 150 / 151

Dual-in-line pin headers

Open frame

Interconnect

Series 15X header sockets

are equipped with

0.47–0.48 mm male

contacts, pluggable into

standard female contacts

Sockets have 0.64–0.68

mm dia. solder pin

Platings Sleeve Clip Pin

10 0.25 µm Au

90 5 µm Sn Pb

Ordering information

For standard versions see table (order codes)

Option:

Pin diameter 0.47 mm at both ends available with

L = 6.2 mm: 151-xx-xxx-00-009

L = 8.4 mm: 151-xx-xxx-00-010

L = 15.3 mm: 151-xx-xxx-00-011

Plating: replace xx with requested plating code

10 150-xx-210-00-001 151-xx-210-00-xxx 003 004 005 016 017 Fig. 1 12.6 5.08 7.6

4 150-xx-304-00-001 151-xx-304-00-xxx 003 004 005 016 017 Fig. 2 5.0 7.62 10.1

6 150-xx-306-00-001 151-xx-306-00-xxx 003 004 005 016 017 Fig. 3 7.6 7.62 10.1

8 150-xx-308-00-001 151-xx-308-00-xxx 003 004 005 016 017 Fig. 4 10.1 7.62 10.1

10 150-xx-310-00-001 151-xx-310-00-xxx 003 004 005 016 017 Fig. 5 12.6 7.62 10.1

12 150-xx-312-00-001 151-xx-312-00-xxx 003 004 005 016 017 aFig. 5a 15.2 7.62 10.1

14 150-xx-314-00-001 151-xx-314-00-xxx 003 004 005 016 017 Fig. 6 17.7 7.62 10.1

16 150-xx-316-00-001 151-xx-316-00-xxx 003 004 005 016 017 Fig. 7 20.3 7.62 10.1

18 150-xx-318-00-001 151-xx-318-00-xxx 003 004 005 016 017 Fig. 8 22.8 7.62 10.1

20 150-xx-320-00-001 151-xx-320-00-xxx 003 004 005 016 017 Fig. 9 25.3 7.62 10.1

22 150-xx-322-00-001 151-xx-322-00-xxx 003 004 005 016 017 Fig. 10 27.8 7.62 10.1

24 150-xx-324-00-001 151-xx-324-00-xxx 003 004 005 016 017 Fig. 11 30.4 7.62 10.1

28 150-xx-328-00-001 151-xx-328-00-xxx 003 004 005 016 017 Fig. 12 35.5 7.62 10.1

20 150-xx-420-00-001 151-xx-420-00-xxx 003 004 005 016 017 aFig. 12a 25.3 10.16 12.6

22 150-xx-422-00-001 151-xx-422-00-xxx 003 004 005 016 017 Fig. 13 27.8 10.16 12.6

24 150-xx-424-00-001 151-xx-424-00-xxx 003 004 005 016 017 Fig. 14 30.4 10.16 12.6

28 150-xx-428-00-001 151-xx-428-00-xxx 003 004 005 016 017 Fig. 15 35.5 10.16 12.6

32 150-xx-432-00-001 151-xx-432-00-xxx 003 004 005 016 017 Fig. 16 40.6 10.16 12.6

10 150-xx-610-00-001 151-xx-610-00-xxx 003 004 005 016 017 aFig. 16a 12.6 15.24 17.7

24 150-xx-624-00-001 151-xx-624-00-xxx 003 004 005 016 017 Fig. 17 30.4 15.24 17.7

28 150-xx-628-00-001 151-xx-628-00-xxx 003 004 005 016 017 Fig. 18 35.5 15.24 17.7

32 150-xx-632-00-001 151-xx-632-00-xxx 003 004 005 016 017 Fig. 19 40.6 15.24 17.7

36 150-xx-636-00-001 151-xx-636-00-xxx 003 004 005 016 017 Fig. 20 45.7 15.24 17.7

40 150-xx-640-00-001 151-xx-640-00-xxx 003 004 005 016 017 Fig. 21 50.6 15.24 17.7

42 150-xx-642-00-001 151-xx-642-00-xxx 003 004 005 016 017 Fig. 22 53.2 15.24 17.7

48 150-xx-648-00-001 151-xx-648-00-xxx 003 004 005 016 017 Fig. 23 60.9 15.24 17.7

50 150-xx-650-00-001 151-xx-650-00-xxx 003 004 005 016 017 Fig. 24 63.4 15.24 17.7

52 150-xx-652-00-001 151-xx-652-00-xxx 003 004 005 016 017 Fig. 25 65.9 15.24 17.7

50 150-xx-950-00-001 151-xx-950-00-xxx 003 004 005 016 017 Fig. 26 63.4 22.86 25.3

52 150-xx-952-00-001 151-xx-952-00-xxx 003 004 005 016 017 Fig. 27 65.9 22.86 25.3

64 150-xx-964-00-001 151-xx-964-00-xxx 003 004 005 016 017 Fig. 28 81.1 22.86 25.3

No. Order Codes Insulator

of dimen-

poles Platings: see ordering information sions

Fig. 1 L = 4.0 mm Fig.2 L = 6.2 8.4 15.3 21.2 27.4 See ABC

mm mm mm mm mm page 50

BBBBB

Products not available from stock. Please consult PRECI-DIP.

Fig. 1 Fig. 2

Series 15X/16X/17X/18X

Dual-in-line pin / slotted / turret / solder

cup headers / open frame / solder tail /

wire-wrap posts

Series 153 pin headers

with 3 level wrappost

(Pin headers with solder

tail see page 72)

Series 160 / 163 with

slotted heads to accept

wires or component

leads, series 170 / 173

with turret heads and se-

ries 180 / 183 with solder

cups for wiring applica-

tions, are with solder tail

or 3 level wrappost

Platings Sleeve Clip Pin

10 0.25 µm Au

90 5 µm Sn Pb

Ordering information

For standard versions see table (order codes)

Platings 10 and 90 available for all versions. Replace xx with

required plating code

Option:

2 level wraposts (please consult)

10 153-xx- 160-xx- 163-xx- 170-xx- 173-xx- 180-xx- 183-xx- -210-00-001 Fig. 1 12.6 5.08 7.6

4 153-xx- 160-xx- 163-xx- 170-xx- 173-xx- 180-xx- 183-xx- -304-00-001 Fig. 2 5.0 7.62 10.1

6 153-xx- 160-xx- 163-xx- 170-xx- 173-xx- 180-xx- 183-xx- -306-00-001 Fig. 3 7.6 7.62 10.1

8 153-xx- 160-xx- 163-xx- 170-xx- 173-xx- 180-xx- 183-xx- -308-00-001 Fig. 4 10.1 7.62 10.1

10 153-xx- 160-xx- 163-xx- 170-xx- 173-xx- 180-xx- 183-xx- -310-00-001 Fig. 5 12.6 7.62 10.1

12 153-xx- 160-xx- 163-xx- 170-xx- 173-xx- 180-xx- 183-xx- -312-00-001 aFig. 5a 15.2 7.62 10.1

14 153-xx- 160-xx- 163-xx- 170-xx- 173-xx- 180-xx- 183-xx- -314-00-001 Fig. 6 17.7 7.62 10.1

16 153-xx- 160-xx- 163-xx- 170-xx- 173-xx- 180-xx- 183-xx- -316-00-001 Fig. 7 20.3 7.62 10.1

18 153-xx- 160-xx- 163-xx- 170-xx- 173-xx- 180-xx- 183-xx- -318-00-001 Fig. 8 22.8 7.62 10.1

20 153-xx- 160-xx- 163-xx- 170-xx- 173-xx- 180-xx- 183-xx- -320-00-001 Fig. 9 25.3 7.62 10.1

22 153-xx- 160-xx- 163-xx- 170-xx- 173-xx- 180-xx- 183-xx- -322-00-001 Fig. 10 27.8 7.62 10.1

24 153-xx- 160-xx- 163-xx- 170-xx- 173-xx- 180-xx- 183-xx- -324-00-001 Fig. 11 30.4 7.62 10.1

28 153-xx- 160-xx- 163-xx- 170-xx- 173-xx- 180-xx- 183-xx- -328-00-001 Fig. 12 35.5 7.62 10.1

20 153-xx- 160-xx- 163-xx- 170-xx- 173-xx- 180-xx- 183-xx- -420-00-001 aFig. 12a 25.3 10.16 12.6

22 153-xx- 160-xx- 163-xx- 170-xx- 173-xx- 180-xx- 183-xx- -422-00-001 Fig. 13 27.8 10.16 12.6

24 153-xx- 160-xx- 163-xx- 170-xx- 173-xx- 180-xx- 183-xx- -424-00-001 Fig. 14 30.4 10.16 12.6

28 153-xx- 160-xx- 163-xx- 170-xx- 173-xx- 180-xx- 183-xx- -428-00-001 Fig. 15 35.5 10.16 12.6

32 153-xx- 160-xx- 163-xx- 170-xx- 173-xx- 180-xx- 183-xx- -432-00-001 Fig. 16 40.6 10.16 12.6

10 153-xx- 160-xx- 163-xx- 170-xx- 173-xx- 180-xx- 183-xx- -610-00-001 aFig. 16a 12.6 15.24 17.7

24 153-xx- 160-xx- 163-xx- 170-xx- 173-xx- 180-xx- 183-xx- -624-00-001 Fig. 17 30.4 15.24 17.7

28 153-xx- 160-xx- 163-xx- 170-xx- 173-xx- 180-xx- 183-xx- -628-00-001 Fig. 18 35.5 15.24 17.7

32 153-xx- 160-xx- 163-xx- 170-xx- 173-xx- 180-xx- 183-xx- -632-00-001 Fig. 19 40.6 15.24 17.7

36 153-xx- 160-xx- 163-xx- 170-xx- 173-xx- 180-xx- 183-xx- -636-00-001 Fig. 20 45.7 15.24 17.7

40 153-xx- 160-xx- 163-xx- 170-xx- 173-xx- 180-xx- 183-xx- -640-00-001 Fig. 21 50.6 15.24 17.7

42 153-xx- 160-xx- 163-xx- 170-xx- 173-xx- 180-xx- 183-xx- -642-00-001 Fig. 22 53.2 15.24 17.7

48 153-xx- 160-xx- 163-xx- 170-xx- 173-xx- 180-xx- 183-xx- -648-00-001 Fig. 23 60.9 15.24 17.7

50 153-xx- 160-xx- 163-xx- 170-xx- 173-xx- 180-xx- 183-xx- -650-00-001 Fig. 24 63.4 15.24 17.7

52 153-xx- 160-xx- 163-xx- 170-xx- 173-xx- 180-xx- 183-xx- -652-00-001 Fig. 25 65.9 15.24 17.7

50 153-xx- 160-xx- 163-xx- 170-xx- 173-xx- 180-xx- 183-xx- -950-00-001 Fig. 26 63.4 22.86 25.3

52 153-xx- 160-xx- 163-xx- 170-xx- 173-xx- 180-xx- 183-xx- -952-00-001 Fig. 27 65.9 22.86 25.3

64 153-xx- 160-xx- 163-xx- 170-xx- 173-xx- 180-xx- 183-xx- -964-00-001 Fig. 28 81.1 22.86 25.3

No. Insulator

of Order Codes dimen-

poles sions

Fig. 1 Fig. 2 Fig. 3 Fig. 4 Fig. 5 Fig. 6 Fig. 7 See ABC

page 50

B B B B B B B

Products not available from stock. Please consult PRECI-DIP.

353-10-1xx-00-001

353-90-1xx-00-001

453-10-2xx-00-001

453-90-2xx-00-001

Pin header strip, wrapost, single

row / double row. Solder tail see

page 44

Single row, availability from: 1 to

64 contacts

Standard number of contacts 5,

6, 8, 10, 14, 16, 20, 21, 25, 30,

32, 48, 56, 60 and 64

Double row, availability from 4 to

72 contacts

Standard number of contacts 40,

44, 56, 64 and 72

360-10-1xx-00-001

360-90-1xx-00-001

363-10-1xx-00-001

363-90-1xx-00-001

460-10-2xx-00-001

460-90-2xx-00-001

463-10-2xx-00-001

463-90-2xx-00-001

Slotted head strip, solder tail or

wrapost, single row / double row

Single row, availability from: 1 to

64 contacts

Standard number of contacts 5,

6, 8, 10, 14, 16, 20, 21, 25, 30,

32, 48, 56, 60 and 64

Double row, availability from 4 to

72 contacts

Standard number of contacts 40,

44, 56, 64 and 72

370-10-1xx-00-001

370-90-1xx-00-001

373-10-1xx-00-001

373-90-1xx-00-001

470-10-2xx-00-001

470-90-2xx-00-001

473-10-2xx-00-001

473-90-2xx-00-001

Turret head strip, solder tail or

wrapost, single row / double row

Single row, availability from: 1 to

64 contacts

Standard number of contacts 5,

6, 8, 10, 14, 16, 20, 21, 25, 30,

32, 48, 56, 60 and 64

Double row, availability from 4 to

72 contacts

Standard number of contacts 40,

44, 56, 64 and 72

380-10-1xx-00-001

380-90-1xx-00-001

383-10-1xx-00-001

383-90-1xx-00-001

480-10-2xx-00-001

480-90-2xx-00-001

483-10-2xx-00-001

483-90-2xx-00-001

Solder cup strip, solder tail or

wrapost, single row / double row

Single row, availability from: 1 to

64 contacts

Standard number of contacts 5,

6, 8, 10, 14, 16, 20, 21, 25, 30,

32, 48, 56, 60 and 64

Double row, availability from 4 to

72 contacts

Standard number of contacts 40,

44, 56, 64 and 72

Series 353–383 / 453–483

PCB Header Strips

Single row / double row

Wire-wrap / solder tail

Headers

With pin / slotted / turret / solder cup head

Solder tail or wrapost

Solder tail pin ∅0.53 mm

Wrapost termination ■■0.63 square

Ordering information

Replace xx with the number of poles. e.g. 460-10-2xx-00-001

for a double row version with 8 pins per row becomes:

460-10-216-00-001

Platings Sleeve Clip Pin

10 0.25 µm Au

90 5 µm Sn Pb

Products not available from stock. Please consult PRECI-DIP.

Series 299

Dual-in-line sockets / right angle version

Closed frame

Solder tail

Series 299 Dil sockets

with closed frame insula-

tor are designed for com-

ponents to be mounted

perpendicularly to the

PCB, such as LED displays

Right angle solder-tails

are available with either

7.62 mm (standard) or

2.54 mm row spacing

Insertion characteristics:

4-finger standard

Platings Sleeve Clip Pin

93 5 µm Sn Pb 0.75 µm Au

91 5 µm Sn Pb 0.25 µm Au

Ordering information

For complete part number see Order Codes list below

6 299-93-306-10-001 299-93-306-11-001 299-91-306-10-001 299-91-306-11-001 7.6 7.62 10.1

8 299-93-308-10-001 299-93-308-11-001 299-91-308-10-001 299-91-308-11-001 10.1 7.62 10.1

10 299-93-310-10-001 299-93-310-11-001 299-91-310-10-001 299-91-310-11-001 12.6 7.62 10.1

12 299-93-312-10-001 299-93-312-11-001 299-91-312-10-001 299-91-312-11-001 15.2 7.62 10.1

14 299-93-314-10-001 299-93-314-11-001 299-91-314-10-001 299-91-314-11-001 17.7 7.62 10.1

16 299-93-316-10-001 299-93-316-11-001 299-91-316-10-001 299-91-316-11-001 20.3 7.62 10.1

18 299-93-318-10-001 299-93-318-11-001 299-91-318-10-001 299-91-318-11-001 22.8 7.62 10.1

20 299-93-320-10-001 299-93-320-11-001 299-91-320-10-001 299-91-320-11-001 25.3 7.62 10.1

24 299-93-324-10-001 299-93-324-11-001 299-91-324-10-001 299-91-324-11-001 30.4 7.62 10.1

8 299-93-608-10-002 299-91-608-10-002 10.1 15.24 17.7

10 299-93-610-10-002 299-91-610-10-002 12.6 15.24 17.7

12 299-93-612-10-002 299-91-612-10-002 15.2 15.24 17.7

14 299-93-614-10-002 299-91-614-10-002 17.7 15.24 17.7

16 299-93-616-10-002 299-91-616-10-002 20.1 15.24 17.7

18 299-93-618-10-002 299-91-618-10-002 22.8 15.24 17.7

20 299-93-620-10-002 299-91-620-10-002 25.3 15.24 17.7

22 299-93-622-10-002 299-91-622-10-002 27.8 15.24 17.7

24 299-93-624-10-002 299-91-624-10-002 30.4 15.24 17.7

26 299-93-626-10-002 299-91-626-10-002 33.0 15.24 17.7

28 299-93-628-10-002 299-91-628-10-002 35.5 15.24 17.7

30 299-93-630-10-002 299-91-630-10-002 38.0 15.24 17.7

32 299-93-632-10-002 299-91-632-10-002 40.6 15.24 17.7

36 299-93-636-10-002 299-91-636-10-002 45.7 15.24 17.7

40 299-93-640-10-002 299-91-640-10-002 50.6 15.24 17.7

No. Insulator

of Order Codes dimen-

poles sions

Plating 93 Plating 93 Plating 91 Plating 91 See ABC

page 51

E = 7.62 E = 2.54 E = 7.62 E = 2.54

B B B B

Products not available from stock. Please consult PRECI-DIP.

Series 917

TO sockets

Solder tail

Series 917 TO package sockets exist with 3, 4, 8 and 10

contacts. Two 8 pin versions feature pin centers either on a

5.08 mm or a 5.84 mm circle

Insertion characteristics:

4-finger standard

Ordering information

Replace xx with code of required plating, e.g.

917-xx-103-41-005 becomes: 917-99-103-41-005 with 5 µm

tin on sleeve and clip

917-xx-103-41-005

917-xx-104-41-005

917-xx-108-41-005

Series 917 sockets for TO 5 pack-

age

Contacts arranged on 5.08 mm

circle diameter

917-xx-208-41-005

917-xx-210-41-005 Series 917 sockets for TO 100

package

Contacts arranged on 5.84 mm

circle diameter

Platings Sleeve Clip Pin

91 5 µm Sn Pb 0.25 µm Au

93 5 µm Sn Pb 0.75 µm Au

97 5 µm Sn Pb Goldflash

99 5 µm Sn Pb 5 µm Sn Pb

Products not available from stock. Please consult PRECI-DIP.

Series 999

Jumpers

Male or female

Series 999 jumpers are available

With insulators in various colors for

easier identification

Male version will fit standard receptacles; female version with

open or closed body fits square pin headers

Ordering information

Replace xx with required plating code

Applies to jumpers for square pin headers only

Option:

Wire dia 0.50 mm instead of 0.56 mm. Change second group of figu-

res into 51. Example: 999-11-113-10 becomes 999-51-113-10 . (Ap-

plies only to jumpers for receptacle connectors without insulator)

Platings:

0.25 µm Au 5 µm Sn Pb

999-11-110-10 999-11-110-90

999-11-210-10 999-11-210-90

999-11-210-11 999-11-210-91

Jumpers for receptacle connec-

tors. B = 2.54 mm

Insulator:

none

black

red

Platings:

0.25 µm Au 5 µm Sn Pb

999-11-112-10 999-11-112-90

999-11-220-10 999-11-220-90

999-11-220-11 999-11-220-91

Jumpers for receptacle connec-

tors. B = 5.08 mm

Insulator:

none

black

red

Platings:

0.25 µm Au 5 µm Sn Pb

999-11-113-10 999-11-113-90

999-11-230-10 999-11-230-90

999-11-230-11 999-11-230-91

Jumpers for receptacle connec-

tors. B = 7.62 mm

Insulator:

none

black

red

Body style

Open body Closed body

999-xx-310-00 999-xx-210-00

999-xx-310-02 999-xx-210-02

999-xx-310-06 999-xx-210-06

Female jumpers for 2.54 mm

square pin headers:

black

red

blue

Platings Sleeve Clip Pin

19 0.25 µm Au*

39 0.75 µm Au*

90 5 µm Sn Pb

* selective

Products not available from stock. Please consult PRECI-DIP.

Product information

NEW ADAPTER SOCKET FOR BGA COMPONENTS

The new BGA (Ball Grid Array) technology was designed for high pin count packages and direct

SMT assembly on the PCB. BGA components have small tin balls instead of soldering pins and

are thus suitable for direct reflow soldering on SMT circuit boards.

The contacts are arranged in a grid pattern with a pitch of 1.5 mm or 1.27 mm.

This type of package allows cost and dimensional reductions, but there is a soldering problem as

connections in the center of the array cannot be inspected visually.

The new adapter under design at Preci-Dip consists of two parts:

1. the socket: standard type PGA socket with female contacts for soldering or SMT

connections.

2. the carrier: has metal pad on one side for SMT soldering of the BGA component. On the

other side male contacts allow plugging in the socket.

The design of the insulator body is adapted to the use of automatic or manual insertion/extrac-

tion equipment. Orientation and/or position marks required by automatic equipment available

on request.

Technical specifications

Materials

– Insulator: Glass filled thermoplastic polyester, self extinguishing

UL 94 V-0, colour black, resistant to mineral acids, solvents, grea-

ses, oils (short time).

– Receptacle contact:

– Sleeve: Screw-machined brass (QQ-B-626), gold or tin-lead pla-

ted (90/10) over 2–3 µm nickel

– Clip: Stamped beryllium-copper (QQ-C-533), gold or tin-lead

(90/10) plated over 2–3 µm nickel

– Pin contact: Screw-machined brass (QQ-B-626) or phosphor

bronze (QQ-B-750), gold or tin-lead plated (90/10) over 2–3 µm

nickel

Mechanical data

– Insertion characteristics

(measured with a polished steel gauge, typical values):

– Type of clip (finger): 6 6 6 3*

– Insertion characteristics: low very low ultra low low

– Gauge diameter (mm): 0.46 0.46 0.46 0.46

– Insertion force (N): 0.6 0.35 0.20 0.7

– Withdrawal force (N): 0.3 0.20 0.10 0.3

– Mechanical life: min. 100 cycles * Series 614 only

Electrical data

– Rated current: 1 A

– Rated voltage: 100 VRMS / 150 VDC

– Contact resistance: 10 mΩmax.

– Insulation resistance: 10 000 MΩmin.

– Dielectric strength: 1000 VRMS min. (700 for

Series 517 Intersticial PGA)

– Air and creepage distances: 0.6 mm (0.3 for Series 517)

– Capacitance: 0.3 pF max. (1 for series 517)

Environmental data

– Operating temperature: –55/+125°C

– Vibration (10–2000 Hz, 15 g): no electrical discontinuity > 1 µs

– Shock: (50 g): no electrical discontinuity > 1 µs

– Solderability (IEC 68-2-54 Ta): 235°C, 5 s

– Resistance to soldering heat: 260°C, 10 s (IEC 68-2-20 Tb)

– Atmospheric corrosion: IEC 68-2-42 and 43

– Climatic category (IEC): 55/125/21

Dimensional data

Calculate with n1 = number of contacts in one line (5≤n1≤21)

and n2 = characteristic size of the window (3≤n2≤10)

for polyester bodies

A = n1×2.54

B = (n1–1)×2.54

C = (n2×2.54)–0.40

for glass-epoxy bodies

A = n1×2.54+1.27

B = (n1–1)×2.54

C = (n2×2.54)–0.40

Pin grid array

sockets and carriers

Series 510 / 511 / 515

Pin grid array sockets

Solder tail

Pin grid array sockets, standard solder version

PGA sockets are high density connecting devices equipped with

machined precision contacts with soft contact clips assuring low

insertion/withdrawal forces. Over 200 standard pinouts are

available; inquiries for custom varieties are welcome

Insertion characteristics: 6-finger low, very low or ultra low force

Ordering information

Replace xxx-xx-xxx with the number of poles, body size and lay-

out numbers as indicated on pages 88 to 92. For example, a 12×12

pin configuration with window and 108 standard soldering

contacts as shown on page 88 becomes: 510-93-108-12-051-001

Machined epoxy insulator for extra sturdiness and low profile appli-

cations; solder and wire-wrap terminations only: please consult for

availability and specifications

510-13-xxx-xx-xxx-001

510-91-xxx-xx-xxx-001

510-93-xxx-xx-xxx-001

510-97-xxx-xx-xxx-001

510-99-xxx-xx-xxx-001

510-93Bxxx-xx-xxx-001

510-97Bxxx-xx-xxx-001

510-93Cxxx-xx-xxx-001

510-97Cxxx-xx-xxx-001

PGA sockets with standard solder

tails, length 3.2 mm

Option:

PGA sockets with optional stand-

offs, please consult for availability

Option:

PGA sockets with standard solder

tail length 3.2 mm and very low

force (B) or ultra low force (C) clips

510-13-xxx-xx-xxx-001

510-91-xxx-xx-xxx-001

510-93-xxx-xx-xxx-001

510-97-xxx-xx-xxx-001

510-99-xxx-xx-xxx-001

Option:

PGA sockets with standard solder

tails, length 3.2 mm, four optional

self clinching snap-in pins, and four

optional stand-offs.

Add 70 to fourth group of figures

in standard reference number, e.g.

510-93-108-12-051-001 becomes:

510-93-108-82-051-001

511-13-xxx-xx-xxx-001

511-91-xxx-xx-xxx-001

511-93-xxx-xx-xxx-001

511-97-xxx-xx-xxx-001

511-99-xxx-xx-xxx-001

PGA sockets with standard solder

tails, length 4.2 mm

515-13-xxx-xx-xxx-001

515-91-xxx-xx-xxx-001

515-93-xxx-xx-xxx-001

515-97-xxx-xx-xxx-001

515-99-xxx-xx-xxx-001

PGA sockets with low profile

contacts and solder tails of 2.8 mm

length

PGA sockets with ultra low profile

contacts please consult

Platings Sleeve Clip Pin

13 0.25 µm Au 0.75 µm Au

91 5.0 µm Sn 0.25 µm Au

93 5.0 µm Sn 0.75 µm Au

97 5.0 µm Sn Goldflash

99 5.0 µm Sn 5.0 µm Sn

Products not available from stock. Please consult PRECI-DIP.

Series 516 / 52X / 550 / 551

Pin grid array sockets / interconnect

receptacle and pin / solder tail

Receptacle with wire-wrap posts

Pin grid array sockets, interconnect receptacle and pin,

solder tail, receptacle with wire-wrap posts

Series 516, 521, 522, 523, 550 and 551 PGA sockets are high

density connecting devices equipped with machined precision

male or female contacts.

Receptacles have soft contact clips assuring low insertion/with-

drawal forces. Over 200 standard pinouts are available; inquiries

for custom varieties are welcome

Insertion characteristics: receptacle 6-finger low force

Ordering information

Replace xxx-xx-xxx with the number of poles, body size and lay-

out numbers as indicated on pages 88 to 92. For example, a 12×12

pin configuration with window and 108 interconnect contacts as

shown on page 88 becomes: 516-93-108-12-051-003 or 551-90-

108-12-051-003

L =

516-93-xxx-xx-xxx-006 6

516-93-xxx-xx-xxx-003 8

516-93-xxx-xx-xxx-012 9

516-93-xxx-xx-xxx-007 10

516-93-xxx-xx-xxx-008 12

516-93-xxx-xx-xxx-009 13

516-93-xxx-xx-xxx-001 15

516-93-xxx-xx-xxx-011 18

516-93-xxx-xx-xxx-004 22

516-93-xxx-xx-xxx-013 33

PGA interconnect sockets; solder

tail

L =

550-10-xxx-xx-xxx-001 4.0 mm

550-90-xxx-xx-xxx-001

551-10-xxx-xx-xxx-003 6.2 mm

551-90-xxx-xx-xxx-003

551-10-xxx-xx-xxx-004 8.4 mm

551-90-xxx-xx-xxx-004

551-10-xxx-xx-xxx-005 15.3 mm

551-90-xxx-xx-xxx-005

551-10-xxx-xx-xxx-016 21.2 mm

551-90-xxx-xx-xxx-016

551-10-xxx-xx-xxx-017 27.4 mm

551-90-xxx-xx-xxx-017

PGA interconnect sockets; solder

tail

Platings Sleeve Clip Pin

10 0.25 µm Au

13 0.25 µm Au 0.75 µm Au

90 5.0 µm Sn Pb

91 5.0 µm Sn Pb 0.25 µm Au

93 5.0 µm Sn Pb 0.75 µm Au

97 5.0 µm Sn Pb Goldflash

99 5.0 µm Sn Pb 5.0 µm Sn Pb

Products not available from stock. Please consult PRECI-DIP.

52x-13-xxx-xx-xxx-001

52x-91-xxx-xx-xxx-001

52x-93-xxx-xx-xxx-001

52x-97-xxx-xx-xxx-001

52x-99-xxx-xx-xxx-001

1 level L = 6.60 mm = 521-..

2 level L = 9.40 mm = 522-..

3 level L = 12.95 mm = 523-..

PGA sockets with wire-wrap

terminations

Dimensions of wrapost 0.635

square

Series 517 / 614

Pin grid array sockets and carrier

with interstitial contact rows

Solder tail

Pin grid array sockets with interstitial contact rows

These sockets of a very compact design have interstitial contact

rows with a staggered contact arrangement and row distances

of 1.27 mm. Their contact density is nearly double as compared

to PGAs based on a standard 2.54 mm grid pattern

They are equipped with machined precision contacts with extra-

soft contact clips assuring low insertion/withdrawal forces

Insertion characteristics: 6-finger very low

Ordering information

Replace xxx-xx-xxx with number of poles, body size and

layout numbers as indicated on pages 91 and 92. For example,

a 18×18 pin configuration with 17×17 interstitial rows and

standard soldering tails becomes: 517-93-391-18-101111

Options:

For other sizes and layouts please consult

517-91-xxx-xx-xxx-111

517-93-xxx-xx-xxx-111

517-97-xxx-xx-xxx-111

PGA sockets with interstitial rows

and standard solder tails, length

3.2 mm

Platings Sleeve Clip Pin

91 5 µm Sn 0.25 µm Au

93 5 µm Sn 0.75 µm Au

97 5 µm Sn Goldflash

Interstitial PGA socket with

standard solder tails and 4 ele-

vating contacts located at the

corners for better soldering and

cleaning

Add 50 to the fourth group of

figures in standard reference

number, e.g.

517-93-391-18-101111 becomes

517-93-391-68-101111

517-91-xxx-xx-xxx-111

517-93-xxx-xx-xxx-111

517-97-xxx-xx-xxx-111

PGA carrier socket with dispos-

able plastic body and carrier pins.

Low profile ultra thin contacts are

plugged-on

Solder terminations ∅0.88 mm

total length of contact 3.9 mm

Requires ∅min. 0.9 mm holes in

PCB

614-91-xxx-xx-xxx-144

614-93-xxx-xx-xxx-144

614-97-xxx-xx-xxx-144

Products not available from stock. Please consult PRECI-DIP.

Series 546

Pin Grid Array sockets

Press-fit terminations

Pin Grid Array sockets with press-fit terminations

PGA sockets are high density connecting devices equipped with

machined precision contacts with soft contact clips assuring low

insertion/withdrawal forces. Over 200 standard pinouts are

available; inquiries for custom varieties are welcome

New compliant press-fit terminations with modified eye of the

needle for solderless mount into PCBs with through plated holes

guarantee gas-tight contact zones

Insertion characteristics: 6 finger low force

Ordering information

Replace xxx-xx-xxx with the number of poles, body size and

layout numbers as indicated on pages 88 to 92. For example,

a 12×12 pin configuration with window and 108 standard

soldering contacts as shown on page 88 becomes:

546-93-108-12-101-028

546-91-xxx-xx-xxx-035

546-93-xxx-xx-xxx-035

546-99-xxx-xx-xxx-035

PGA sockets with press-fit termi-

nations for 2.1 to 3.2 mm PCB

thickness. Hole diameter

1 (+0.09/–0.06) mm

546-91-xxx-xx-xxx-036

546-93-xxx-xx-xxx-036

546-99-xxx-xx-xxx-036

PGA sockets with press-fit termi-

nations for 1.5 to 2.0 mm PCB

thickness. Hole diameter

1 (+0.09/–0.06) mm

Platings Sleeve Clip Pin

91 5 µm Sn Pb 0.25 µm Au

93 5 µm Sn Pb 0.75 µm Au

99 5 µm Sn Pb 5 µm Sn Pb

NEW!

Series 546 PGA sockets with press-fit terminations are now available

in all standard interstitial pinouts.

For more details consult:

Page 68: product info on press-fit technology

Pages 79 & 83: dimensional data

Pages 91/92: interstitial socket layouts

Series 612 / 614

Pin grid array sockets

Carrier types

Pin grid array sockets, carrier types

PGA carrier sockets are high density connecting devices having

a disposable plastic body equipped with carrier pins. Machined

precision contacts with soft contact clips assuring low

insertion/withdrawal forces are plugged-on. Over 200 standard

pinouts are available; inquiries for custom varieties are welcome

Insertion characteristics: 6 finger low force or 3 finger low force

for part number termination 012

Ordering information

Replace xxx-xx-xxx with the number of poles, body size and

layout numbers as indicated on pages 88 to 92. For example,

a 12×12 pin configuration with window and 108 standard

soldering contacts as shown on page 88 becomes:

612-93-108-12-051-001.

612-13-xxx-xx-xxx-101

612-91-xxx-xx-xxx-101

612-93-xxx-xx-xxx-101

612-97-xxx-xx-xxx-101

612-99-xxx-xx-xxx-101

PGA carrier sockets with dispos-

able plastic body and carrier pins.

Standard contacts are plugged-

Solder terminations ∅0.53 mm,

length 3.2 mm

614-13-xxx-xx-xxx-101

614-91-xxx-xx-xxx-101

614-93-xxx-xx-xxx-101

614-97-xxx-xx-xxx-101

614-99-xxx-xx-xxx-101

PGA carrier sockets with dispos-

able plastic body and carrier pins.

Low profile contacts are plugged-

Solder terminations ∅1.37 mm,

total length of contact 4.2 mm

Requires ∅1.4 mm holes in PCB

614-13-xxx-xx-xxx-112

614-91-xxx-xx-xxx-112

614-93-xxx-xx-xxx-112

614-97-xxx-xx-xxx-112

614-99-xxx-xx-xxx-112

PGA carrier sockets with dispos-

able plastic body and carrier pins.

Low profile ultra thin contacts are

plugged-on

Solder terminations ∅0.98 mm,

total length of contact 3.5 mm

Requires ∅1 mm holes in PCB

Platings Sleeve Clip Pin

13 0.25 µm Au 0.75 µm Au

91 5.0 µm Sn Pb 0.25 µm Au

93 5.0 µm Sn Pb 0.75 µm Au

97 5.0 µm Sn Pb Goldflash

99 5.0 µm Sn Pb 5.0 µm Sn Pb

Products not available from stock. Please consult PRECI-DIP.

Series 500 / 600

Pin grid array Sockets

Part number identification

Size of body:

Polyester 05 06 07 08 09 10 11 12 13

5×56×67×78×89×910×10 11×11 12×12 13×13

14 15 16 17 18 19 20 21

14×14 15×15 16×16 17×17 18×18 19×19 20×20 21×21

Epoxy 35 36 37 38 39 40 41 42 43

5×56×67×78×89×910×10 11×11 12×12 13×13

44 45 46 47 48 49 50 51

14×14 15×15 16×16 17×17 18×18 19×19 20×20 21×21

Polyester and 55 56 57 58 59 60 61 62 63

stand offs 5×56×67×78×89×910×10 11×11 12×12 13×13

64 65 66 67 68 69 70 71

14×14 15×15 16×16 17×17 18×18 19×19 20×20 21×21

Polyester 75 76 77 78 79 80 81 82 83

and self 5×56×67×78×89×910×10 11×11 12×12 13×13

clinching 84 85 86 87 88 89 90 91

snap-in pins 14×14 15×15 16×16 17×17 18×18 19×19 20×20 21×21

5 Standard PGA

6 Carrier PGA

plating: sleeve (pin) clips

10 0.25 µm Au –

13 0.25 µm Au 0.75 µm Au

90 5 µm Sn –

91 5 µm Sn 0.25 µm Au

93 5 µm Sn 0.75 µm Au

97 5 µm Sn Goldflash

99 5 µm Sn 5 µm Sn

Insertion

caracteristcs:

– standard

B very low

C ultra low

total number

of pins

size of window:

see pages 88 to 92

for most popular

footprints.

XXX 0

XXX

–XX

XX X XXX –XX ––

10 01 Solder 80

11 01 Solder 80

12 01 Carrier 84

14 01 Carrier 84

14 12 Carrier 84

15 01 Solder 80

15 03 Solder 80

16 .. Interconnect 81

17 11 Interstitial 82

2x .1 Wire-wrap 81

46 .. Press-Fit 83

5. .. Interconnect 81

XX XX page:

Series 500 / 600

Pin grid array sockets

Custom grid design

If the desired footprint does not exist in this catalogue,

please photocopy this page, complete it and send it to your

PRECI-DIP agent.

Your address

▼

Ordering information

1 Type of PGA

2 Type of pin See opposite page

3 Plating

Sleeve

Contact (clips)

4 Size of body

5 Semiconductor device used

6 Quantity

Example:

Fill in the

position of pins

Mark of the window

▼

Top view

Series 500 / 600

Pin grid array sockets

5×56×67×7

xxx-xx-022-05-001 xxx-xx-036-06-000 xxx-xx-049-07-000

8×89×9

xxx-xx-064-08-000 xxx-xx-081-09-000

10×10 10×10 10×10 10×10 10×10 10×10

xxx-xx-037-10-061 xxx-xx-064-10-051 xxx-xx-068-10-061 xxx-xx-084-10-031 xxx-xx-085-10-031 xxx-xx-100-10-000

11×11 11×11 11×11 11×11 11×11 11×11

xxx-xx-068-11-061 xxx-xx-069-11-061 xxx-xx-084-11-042 xxx-xx-085-11-041 xxx-xx-085-11-045 xxx-xx-121-11-000

12×12 12×12 12×12

xxx-xx-089-12-051 xxx-xx-108-12-051 xxx-xx-144-12-000

13×13 13×13 13×13 13×13 13×13 13×13

xxx-xx-084-13-081 xxx-xx-088-13-062 xxx-xx-088-13-081 xxx-xx-100-13-063 xxx-xx-101-13-061 xxx-xx-114-13-061

TOP VIEW

Series 500 / 600

Pin grid array sockets

13×13 13×13 13×13 13×13 13×13 13×13

xxx-xx-114-13-062 xxx-xx-120-13-061 xxx-xx-121-13-061 xxx-xx-124-13-041 xxx-xx-128-13-041 xxx-xx-132-13-041

13×13 13×13

xxx-xx-133-13-041 xxx-xx-169-13-000

14×14 14×14 14×14 14×14

xxx-xx-132-14-071 xxx-xx-133-14-071 xxx-xx-135-14-051 xxx-xx-196-14-000

15×15 15×15 15×15 15×15 15×15 15×15

xxx-xx-144-15-081 xxx-xx-145-15-081 xxx-xx-149-15-063 xxx-xx-160-15-061 xxx-xx-176-15-061 xxx-xx-181-15-051

15×15

xxx-xx-225-15-000

16×16 16×16 16×16 16×16

xxx-xx-156-16-091 xxx-xx-160-16-071 xxx-xx-175-16-072 xxx-xx-256-16-000

TOP VIEW

Series 500 / 600

Pin grid array sockets

17×17 17×17 17×17 17×17 17×17 17×17

xxx-xx-168-17-101 xxx-xx-169-17-101 xxx-xx-192-17-081 xxx-xx-207-17-081 xxx-xx-207-17-082 xxx-xx-209-17-081

17×17

xxx-xx-289-17-000

18×18 18×18 18×18 18×18 18×18 18×18

xxx-xx-179-18-111 xxx-xx-179-18-112 xxx-xx-191-18-091 xxx-xx-223-18-091 xxx-xx-225-18-091 xxx-xx-241-18-071

18×18

xxx-xx-324-18-000

19×19 19×19 19×19 19×19

xxx-xx-238-19-101 xxx-xx-280-19-081 xxx-xx-281-19-081 xxx-xx-361-19-000

20×20 20×20 20×20 21×21 21×21

xxx-xx-257-20-111 xxx-xx-299-20-091 xxx-xx-400-20-000 xxx-xx-273-21-121 xxx-xx-441-21-000

TOP VIEW

Series 500 / 600

Pin grid array sockets

14×14 14×14 14×14

517-xx-183-14-091-111 517-xx-304-14-051-111 517-xx-365-14-000-111

17×17 17×17 17×17 17×17

517-xx-321-17-101-111 517-xx-364-17-091-111 517-xx-365-17-091-111 517-xx-545-17-000-111

18×18 18×18 18×18 18×18 18×18 18×18

517-xx-280-18-101-111 517-xx-293-18-101-111 517-xx-305-18-101-111 517-xx-325-18-111-111 517-xx-361-18-101-111 517-xx-369-18-091-111

18×18 18×18

517-xx-391-18-101-111 517-xx-431-18-091-111

19×19 19×19 19×19 19×19 19×19 19×19

517-xx-296-19-131-111 517-xx-320-19-131-111 517-xx-321-19-121-111 517-xx-372-19-111-111 517-xx-401-19-101-111 517-xx-403-19-111-111

19×19 19×19 19×19 19×19 19×19

517-xx-419-19-111-111 517-xx-420-19-111-111 517-xx-428-19-101-111 517-xx-429-19-101-111 517-xx-463-19-101-111

TOP VIEW

Series 500 / 600

Pin grid array sockets

20×20 20×20

517-xx-447-20-121-111 517-xx-557-20-091-111

21×21 21×21

517-xx-528-21-121-111 517-xx-529-21-121-111

22×22 22x22

517-xx-503-22-131-111 517-xx-559-22-131-111

24x24

517-xx-599-54-131-111

rectangular

517-xx-387-01-016-119

TOP VIEW

Technical specifications

Series

540 504

Materials

– Insulator:Glass filled thermoplastic, self extinguishing

UL 94 V-0,

– Contact: Plated Copper alloy overall nickel underplating,

finish:

active contact area tin/lead tin/lead

termination area tin/lead tin/lead

Mechanical data

– Contact pressure

(per contact) (N min.): 1.5 1.2

– Mechanical life (cycles): 50 25

Electrical data

– Rated current (A):

SMD types 1 –

Thru-hole types 2 1

– Contact resistance: 20 mΩmax.

– Insulation resistance: 5000 MΩmin.

– Dielectric strength: 600 VRMS min.

– Capacitance: 2 pF max.

Environmental data

– Operating temperature: –55/+125°C

– Vibration (10–2000 Hz, 15 g): no electrical discontinuity

> 1 µs

– Climatic category (IEC): 55/85/21

Chip carrier sockets

for PLCC

Series 540

Sockets for Plastic Leaded Chip Carriers

(PLCC)

Solder tail

Series 540 PLCC sockets

are designed to accept

JEDEC type leaded plastic

substrates

The insulator body has

polarizing features for

both substrate and PCB

insertion

Contacts of highly reliable

design guarantee safe

component retention

thanks to positive spring

action

Plating Stamped contacts

99 tin-lead over nickel

Please note: 99 is only plating available for

this product.

Ordering information

For standard part numbers, please refer to table “Order Codes”

For PCB hole patterns see below

No. of poles Order Codes Dimensions

A1A2B1B2C1C2

20 540-99-020-24-000-1 14.98 14.98 5.08 5.08 9.14 9.14

28 540-99-028-24-000-1 17.52 17.52 7.62 7.62 11.68 11.68

*32* 540-99-032-24-000-1 17.52 20.06 7.62 10.16 11.78 14.32

44 540-99-044-24-000-1 22.60 22.60 12.70 12.70 16.76 16.76

52 540-99-052-24-000-1 25.15 25.15 15.24 15.24 19.30 19.30

68 540-99-068-24-000-1 30.22 30.22 20.32 20.32 24.38 24.38

84 540-99-084-24-000-1 35.31 35.31 25.40 25.40 29.46 29.46

* rectangular

PCB hole patterns thru-hole types Series 540 / 504

32 poles 44 poles

84 poles68 poles52 poles

28 poles20 poles

Series 540

Sockets for Plastic Leaded Chip Carriers

(PLCC)

SMT terminations

Series 540 PLCC sockets

with SMT terminations

come with square sizes

for IC-packages according

to JEDEC MO-047, rec-

tangular size (32) accord-

ing to JEDEC MO-052 =

low profile

Solder tail width 0.33 mm

Guaranteed coplanarity

tolerance of SMT termina-

tions max. 0.10 mm

Plating Stamped contacts

99 tin-lead over nickel

Please note: 99 is only plating available for

this product.

Ordering information

Please refer to table Order Codes

Standard packaging: tube

Packaging options:

Tape on reel (add suffix TR, ex 540-99-020-17-400-TR)

For PCB layout see below

No. of poles Order Codes Dimensions

Standard parts: Parts with 2 positioning pegs: A1A2B1B2C1C2DE

20 540-99-020-17-400 540-99-020-17-400-2 14.86 14.86 5.08 5.08 7.26 7.26 4.60 16.00

28 540-99-028-17-400 540-99-028-17-400-2 17.40 17.40 7.62 7.62 9.80 9.80 4.60 19.70

*32* 540-99-032-17-400 540-99-032-17-400-2 16.90 19.45 7.62 10.16 9.61 12.16 3.90 22.00

44 540-99-044-17-400 540-99-044-17-400-2 22.48 22.48 12.70 12.70 14.88 14.88 4.60 27.00

52 540-99-052-17-400 540-99-052-17-400-2 25.40 25.40 15.24 15.24 17.50 17.50 4.60 30.80

68 540-99-068-17-400 540-99-068-17-400-2 30.54 30.54 20.32 20.32 22.50 22.50 4.60 37.65

84 540-99-084-17-400 540-99-084-17-400-2 35.56 35.56 25.40 25.40 27.62 27.62 4.60 45.10

* rectangular

PCB layout SMD types Series 540…

52 poles 68 poles 84 poles

20 poles 28 poles 32 poles 44 poles

Know-how and flexibility

Manufacturing customized product requires above average

knowledge and experience. Excellent design capabilities are

necessary and a powerful production unit, capable of fulfilling

high quality standards. Professionals with an open mind to new

design ideas and the ability to turn these ideas into reality

quickly at reasonable cost – that is the Preci-Dip crew.

In-house production

Preci-Dip's in-house production capability is practically total,

from the raw material to the finished part. It includes precision

machining, clip stamping and electroplating of the contact as

well as injection molding of the insulator body and automatic

assembly.

High quality level

Total control over all important steps of production and a fully

integrated Q.A. system allow to guarantee a constantly high

quality level. Raw products coming from external sources

undergo stringent inspections before they are accepted at Preci-

Dip's manufacturing.

Reliability

One of our main goals is reliability. Reliability of the product.

Reliability in serving our customers. Reliability in assuring fair

prices and delivery times. You may find out for yourself the day

you try us.

PRECI-DIP – people who care

Customized

products

Tools

Cutter / strip saw / PLCC extractor /

PGA inserter and extractor

Professional header cutter

Cutting of straight and right angle pin headers and strips

Adjustable plate locator accepts 2.54–10 mm headers.

Blade height adjustable with adjustment screw, replacement blades,

blade straight action of 12 mm.

Application range: Cutting of straight and right angle headers with-

out contact loss. Capability to cut one, two and three row headers

with 1.0–10 mm height.

Order No. 0200-0108

Strip saw

Please consult

Universal PLCC Extractor Tool

All parts are electrically conductive in order to avoid damage due to

electrostatic discharges.

Order No. 9946

Insertion tool for PGA devices

from 13×13 to 24×24.

Easy to use, safe and accurate

This tool does not require any prior adjustment and the device can

be easily inserted into the socket without damage. The fine adjust-

ment to the size of the socket and insertion are done in one simple

operation. In order to avoid electrostatic damage, all materials used

are electrically conductive.

Two pressing dies are supplied with the tool.

Type 1 suitable for PGAs 13×13 to 24×24

Type 2 suitable for PGAs 17×17 to 24×24

Operation of tool

Place PGA device correctly aligned on socket. By turning the knob

towards the “closed” marker, the claws will grip under the socket

and the pressing die will gently insert the device into the socket. To

remove tool turn the knob towards the “open” mark, the claws

expand and the tool can be removed from the socket.

Order No. 8980200

Extraction tool for PGA devices

from 10×10 to 24×24.

Easy to use, safe and accurate

This tool does not require prior adjustment and the PGA device can

be extracted easily from its socket without damage. The fine adjust-

ment to the size of the device and the extraction are done in one

simple operation. In order to avoid electrostatic damage all material

used are electrically conductive.

During the extraction process, the jaws of the tool grip the device

firmly. There is no danger of slipping off and damaging the compo-

nent.

Minimum space requirements between two adjacent components is

2 to 4 mm (.78˝ to 1.57˝).

Operation of tool

By turning the knob towards the “closed” marker, the claws grip

under the device and extract it from the socket without damage. To

remove the device from tool, the claws are expanded by turning the

knob towards the “open” mark: the device can now be removed.

Order No. 8980101 tool 1: 4 jaws, 4 rests

8980103 tool 3: 2 jaws, 2 rests

8980104 tool 4: 2 jaws, 2 rests

134

▼

▼▼

Index

Part numbers versus catalog page

110…01-505 70

110…10-00 . 70

110…41-001 53

110…41-005 55

110…41-105 59

110…41-105161 60

110…41-605 56

110…41-801 67

111…41-001 54

114…41-117 59

114…41-1..161 60

115…41-00. 57

116…41-0.. 58

117…41-005 61

121…41-001 62

122…41-001 62

123…41-001 62

124…41-002 62

126…41-00 . 71

146…41-0 . . 64

150…00-001 72

150…00-106 59

150…00-106161 60

151…00-0 . . 72

153…00-001 73

160…00-001 73

163…00-001 73

170…00-001 73

173…00-001 73

180…00-001 73

183…00-001 73

210…41-001 63

217…41-005 61

299…10-00 . 75

299…11-001 75

310…01-640 36

310…01-666 36

310…41-001 36

310…41-105 40

310…41-205 40

311…41-001 37

315…41-001 37

315…41-003 37

316…41-0 . . 38

317…01-687 17

317…41-005 17

321…41-001 42

322…41-001 42

323…41-001 42

324…41-002 42

326…41-00 . 42

346…41-0 . . 41

Reference page Reference page Reference page Reference page

350…00-001 44

350…00-006 43

350…00-012 17

350…00-106 46

350…00-206 46

350…01-666 43

351…00-0 44

353…00-001 74

360…00-001 74

363…00-001 74

370…00-001 74

373…00-001 74

380…00-001 74

383…00-001 74

399…10-003 39

399…10-009 45

410…10-00 . 70

410…41-001 36

410…41-105 40

411…41-001 37

415…41-001 37

416…41-0 . . 38

421…41-001 42

422…41-001 42

423…41-001 42

424…41-002 42

426…41-00 . 42

446…41-0 . . 41

450…00-001 44

450…00-006 43

450…00-106 46

451…00-0 . . 44

453…00-0 01 74

460…00-001 74

463…00-001 74

470…00-001 74

473…00-001 74

480…00-001 74

483…00-001 74

499…10-003 39

499…10-009 45

504…24-000 95

507…85

510…80

511…80

515…80

516…81

517…82

521…81

522…81

523…81

540…17-400 96

540…24-000 94

546…83

550…81

551…81

612…PGA 84

612…41-001 65

614…PGA 84

614…144 PGA 82

614…31-012 66

614…41-001 66

712…41-001 47

714…31-0 . . 48

714…41-0 . . 47

800…10-001 30

800…10-002 30

800…20-001 31

800…30-001 32

800…40-001 32

800…65-001 33

800…66-001 33

801…10-001 22

801…10-002 23

801…10-003 24

801…10-004 29

801…10-005 24

801…10-012 23

801…20-001 25

801…20-002 25

801…30-001 26

801…30-002 26

801…40-001 27

801…40-002 27

801…53-001 29

801…65-001 28

801…66-001 28

802…10-001 30

802…10-002 30

802…20-001 31

802…30-001 32

802…65-001 33

802…66-001 33

803…10-001 22

803…10-002 23

803…10-003 24

803…10-004 29

803…10-005 24

803…10-012 23

803…10-227 27

803…20-001 25

803…30-001 26

803…30-002 26

803…53-001 29

803…65-001 28

803…66-001 28

805…10-001 22

805…10-012 23

830…10-001 19

830…20-001 19

830…30-001 20

831…10-001 18

831…20-001 18

831…30-001 20

831…64-001 21

832…10-001 19

832…20-001 19

832…30-001 20

833…10-001 18

833…20-001 18

833…30-001 20

833…64-001 21

850…10-001 13

850…20-001 14

850…30-001 15

850…40-001 15

851…10-001 10

851…20-001 11

851…30-001 12

851…40-001 12

852…10-001 13

852…10-002 13

852…20-001 14

852…20-002 14

852…30-001 15

853…10-001 10

853…10-002 10

853…20-001 11

853…20-002 11

853…30-001 12

854…10-001 13

854…20-001 14

854…30-001 15

855…10-001 10

855…20-001 11

855…30-001 12

890…10-... 34

890…20-... 35

892…10-... 34

892…20-... 35

917…41-005 76

999…77

Tools 98

New products for:

Catalog 10 Print Out 2001

- Telecommunications

- Industrial electronics

- Computer industry

- Automotive industry

100

Product Description File Nbr Page

PCB Connectors

1 mm PCB Socket Connector Series 861 IP9901.01 101

1 mm PCB Pin Connector Series 860 IP9901.04 103

PCB Connector 1.27 mm SMD, automatic assembly Series 850, 851 IP0001.04 105

PCB Socket Connector 2 mm SMD, automatic assembly Series 831 IP0001.03 107

2 mm polarised PCB Socket Connector Series 831 / 833 IP0003.01 109

2 mm shrouded PCB Pin Connector Series 830 / 832 IP0003.02 113

PCB Socket Connector 2.54 mm SMD, automatic assembly Series 310, 410 IP0001.01 117

PCB Socket Connector 2.54 mm SMD, automatic assembly Series 801, 803 IP0001.02 119

PCB Pin Connector 2.54 mm SMD, automatic assembly Series 350 IP0003.04 121

Shrouded Pin Connector 2.54 mm, machined contacts Series 800 to 804 IP0000.01 123

DIL Sockets

DIL Socket SMD, automatic assembly Series 110 / 114 IP0001.05 127

PGA, BGA Sockets

Interstitial PGA Socket SMD Series 514 IP9901.02 130

Interstitial PGA Socket solderless Press-Fit Series 546 IP9901.03 132

BGA Adapter Socket SMD Series 514 / 550 IP9901.05 134

Spring loaded Contacts and Connectors

Springloaded Contact low profile IP0002.01 136

Springloaded Contact ultra thin IP0002.02 138

Modular low profile Springloaded Connector Series 811 and 813 IP0000.02 140

Springloaded Chip Card Connector IP0000.03 142

Spring Manufacturing 144

Index of the new products

Product Information IP9901.01.R1

Rev. 1 –21/05/01- Page 1/2

Preci-Dip Durtal SA

CH-2800 Delémont / Switzerland

phone +41 (32) 421 04 00 - fax +41 (32) 421 04 01

mail:sales@precidip.com – www.precidip.com

101

1 mm Socket Connector with precision machined Contacts

Series 861

1. Description and general features

1.1 General description

Series 860 connectors, introduced exclusively by

Preci-Dip to its metric product line, are equipped with

machined contacts in a pitch of 1 mm.

They come in a single row version with 50 poles

maximum and have a very low profile insulator

withstanding reflow soldering temperatures. The

connector is suitable for through hole or SMD

soldering to the PCB.

The female contacts have a screw-machined outer

contact sleeve equipped with an inserted four finger

contact clip. This clip is a new design and was

optimised by FEM "Finite Elements Modelling".

1.2 Advantages

Metric 1 mm pitch saves approximately 30% of

space per surface unit when compared with 1.27mm

pitch.

Very low profile insulator allows interconnection of

PCBs with a stacking distance of only 4 mm when

used with trough-hole soldering tails.

Thanks to the new clip design, male contacts with

0.4 mm diameter can be used and guarantee

mechanical strength, combined with low

insertion/extraction forces (specially important with

high pin counts).

1.3 Applications

Specially recommended for applications with

extremely little space in surface and/or height, and

high requirements in electrical quality and

mechanical strength, such as:

- Industrial sensors, remote control transceivers

- Medical equipment, systems with embedded

microprocessors

- Portable terminals, mobile phones, professional

mobile radios

1.4 Optional versions

Currently none

2. Technical Specifications

2.1 Environmental 2.3 Mechanical Characteristics

Operating temperature -55 ... + 125°C Accepts pins Diameter 0.40 to 0.46 mm

Climatic Category (IEC) 55 / 125 / 21 Solder tail Cylindrical, diameter 0.40 mm

Solderability 235°C, 5s Mechanical life min.500 cycles

Resistance to soldering

heat

280°C, 10s Coplanarity SMD

terminations

0.1 mm

2.2 Materials 2.4 Electrical Characteristics

Contact body Machined brass, tin plating 5 µm

SnPb over 2.5 µm Ni

Operating voltage 50 VRMS / 60 VDC

Contact spring BeCu, gold plated (0.25 or 0.75

µm) over Ni

Continuous operating

current

max. 1 A per terminal

Contact resistance max 10 mΩInsulator Glass fibre reinforced liquid crystal

polymer LCP, self-extinguishing

UL94V-0, colour black Insulation resistance 10'000 MΩ (after climatic tests)

Dielectric strength 500 VRMS

Air and creepage

distances

0.20 mm

Capacitance 1 pF max.

Product Information IP9901.01.R1

Rev. 1 –21/05/01- Page 2/2

Preci-Dip Durtal SA

CH-2800 Delémont / Switzerland

phone +41 (32) 421 04 00 - fax +41 (32) 421 04 01

mail:sales@precidip.com – www.precidip.com

102

3. Ordering Information

3.1 Dimensions, Order Code Numbers and Packaging Information

Contact Plating Code -PP-: -91- Body: tin, Clip: gold 0.25 um

-93- Body: tin, Clip: gold 0.75 um

Code for number of contacts –0NN-: (example for a 26 poles connector: -026-)

Packaging: version with straight solder pins: in box

SMD versions: Tape & Reel packaging

3.1.1 Socket Connector, single row, straight solder pin, PN 861-PP-0NN-10-001101

3.1.2 Socket Connector, single row, SMD horizontal mount, PN 861-PP-0NN-40-001191

3.2 Availability

Now

Available number of pins: 6 to 12

Packaging: 6 to 8 poles 10 to 12 poles

Tape width 16 mm 24 mm

Pitch on tape 12 mm 12 mm

Reel diameter 330 mm 330 mm

Number of pcs per reel: 2000 2000

Number of pcs per box: 10'000 6000

vailable number of pins: 2 to 50

Product Information IP9901.04.R1

Rev. 1 –21/05/01- Page 1/2

Preci-Dip Durtal SA

CH-2800 Delémont / Switzerland

phone +41 (32) 421 04 00 - fax +41 (32) 421 04 01

mail:sales@precidip.com – www.precidip.com

103

1 mm Pin Connector with Precision machined Contacts

Series 860

1. Description and general features

1.1 General description

Series 860 connectors, introduced exclusively by

Preci-Dip to its metric product line, are equipped with

machined contacts in a pitch of 1 mm.

They come in a single row version with 50 poles

maximum and have a very low profile insulator

withstanding reflow soldering temperatures. The

connector is suitable for through hole or SMD

soldering to the PCB

1.2 Advantages

Metric 1 mm pitch saves approximately 30% of

space per surface unit when compared with 1.27mm

pitch.

Very low profile insulator allows interconnection of

PCBs with a stacking distance of only 4 mm when

used with trough-hole soldering tails.

1.3 Applications

Specially recommended for applications with

extremely little space in surface and/or height, and

high requirements in electrical quality and

mechanical strength, such as:

- Industrial sensors, remote control transceivers

- Medical equipment, systems with embedded

microprocessors

- Portable terminals, mobile phones, professional

mobile radios

1.4 Optional versions

Currently none

2. Technical Specifications

2.1 Environmental 2.3 Mechanical Characteristics

Operating temperature -55 ... + 125°C Contact pin Cylindrical, diameter 0.40 mm

Climatic Category (IEC) 55 / 125 / 21 Solder tail Cylindrical, diameter 0.40 mm

Solderability 235°C, 5s Mechanical life min.500 cycles

Resistance to soldering

heat

280°C, 10s Coplanarity SMD

termionations

0.1 mm

2.2 Materials 2.4 Electrical Characteristics

Contact Machined brass, gold plated 0.25

µm Au or tin plated 5 µm SnPb over

2.5 µm Ni

Operating voltage 50 VRMS / 60 VDC

Continuous operating

current

max. 1 A per terminal

Insulation resistance 10'000 MΩ (after climatic tests)Insulator Glass fibre reinforced liquid crystal

polymere LCP, self-extinguishing

UL94V-0, colour black Dielectric strength 500 VRMS

Air and creepage

distances

min. 0.20 mm

Capacitance max. 1 pF

Product Information IP9901.04.R1

Rev. 1 –21/05/01- Page 2/2

Preci-Dip Durtal SA

CH-2800 Delémont / Switzerland

phone +41 (32) 421 04 00 - fax +41 (32) 421 04 01

mail:sales@precidip.com – www.precidip.com

104

3. Ordering Information

3.1 Dimensions, Order Code Numbers and Packaging Information

Contact Plating Code -PP-: -10- Gold 0.25 um

-90- Tin

Code for number of contacts –0NN-: (example for a 26 poles connector: -026-)

Packaging: version with straight solder pins: in box

SMD versions: Tape & Reel packaging

3.1.1 Pin Connector,single row, straight solder pin, PN 860-PP-0NN-10-001101

3.1.2 Pin Connector, single row, SMD horizontal mount, PN 860-PP-0NN-40-001191

3.2 Availability

Now

vailable number of pins: 2 to 50

Available number of pins: 6 to 12

Packaging: 6 to 8 poles 10 to 12 poles

Tape width 16 mm 24 mm

Pitch on tape 12 mm 12 mm

Reel diameter 330 mm 330 mm

Number of pcs per reel: 2000 2000

Number of pcs per box: 10'000 6000

Product Information IP0001.04.R1

Rev.1 –14/03/01- Page 1/2

Preci-Dip Durtal SA

CH-2800 Delémont / Switzerland

phone +41 (32) 421 04 00 - fax +41 (32) 421 04 01

mail:sales@precidip.com – www.precidip.com

105

PCB Connector Strip 1.27 mm SMD for automatic assembly

Series 850/851

1. Description and general feature

1.1 General description

The 1.27 mm connectors for SMD mount Series 850-

...- 40.251191 (pin) and Series 851-...-40-252191

(receptacle) are now available from PRECI-DIP with

Tape & Reel packaging acc. to EIA 481 Standard and

with modified plastic body for automatic assembly on

the PCB.

They come in single row version with min. 6 and

max. 12 poles.

The max. number of poles is given by the coplanarity

limitations and the tape width of the existing tapes.

1.2 Advantages

The modified plastic body with enlarged width makes

automatic assembly with standard vacuum nozzle

possible.

1.3 Applications

Specially recommended for high volume applications

on automatic PCB assembly lines.

1.4 Optional versions

Same connector strips also available without Tape &

Reel packaging and plastic cap, please see PRECI-

DIP catalogue 10.

2. Technical Specifications

2.1 Environmental 2.3 Mechanical Characteristics

Operating temperature -55 ... + 125°C Pin diameter Diameter 0.43 mm

Climatic Category (IEC) 55 / 125 / 21 SMD solder tail Cylindrical 0.53 mm diameter

Solderability 235°C, 5s Coplanarity SMD

Terminations

0.1 mm

Resistance to soldering

heat

280°C, 10s Mechanical life min. 500 cycles

2.2 Materials 2.4 Electrical Characteristics

Contact body and

contact pin

Machined brass, plating 5 µm SnPb

or 025 µm gold over 2.5 µm Ni

Operating voltage 50 VRMS / 75 VDC

Contact spring BeCu, plated 5 µm SnPb or gold

( 0.25 or 0.75 µm) over Ni

Continuous operating

current

max. 1 A per terminal

Contact resistance max. 20 mΩ

Insulation resistance 10'000 MΩ (after climatic tests)Insulator Glass fibre reinforced high

temperature polyester PCT, self-

extinguishing UL94V-0, colour black Dielectric strength 500 VRMS

Air and creepage distances min. 0.5 mm

Capacitance max. 1 pF

Product Information IP0001.04.R1

Rev.1 –14/03/01- Page 2/2

Preci-Dip Durtal SA

CH-2800 Delémont / Switzerland

phone +41 (32) 421 04 00 - fax +41 (32) 421 04 01

mail:sales@precidip.com – www.precidip.com

106

3. Ordering Information

3.1 Dimensions, Order Number Codes and Packaging Information

Code for number of contacts –0NN- (Example for a 12 poles connector: -012-)

3.1.1 Connector PN 850-PP-0NN-40-251191,

Contact Plating Code –PP-:

-10- Gold 0.25 um

-90- SnPb

3.1.2 Receptacle Connector PN 851-PP-0NN-40-252191

Contact Plating Code –PP-:

body spring

-91- SnPb Gold 0.25 um

-93- SnPb Gold 0.75 um

-99- SnPb SnPb

3.2 Availability

Now

Available number of pins: 6 to 12

Packaging: 6 to 8 poles 10 to 12 poles

Tape width 16 mm 24 mm

Pitch on tape 12 mm 12 mm

Reel diameter 330 mm 330 mm

Number of pcs per reel: 2000 2000

Number of pcs per box: 10'000 6000

PCB Layout

Available number of pins: 6 to 12

Packaging: 6 to 8 poles 10 to 12 poles

Tape width 16 mm 24 mm

Pitch on tape 12 mm 12 mm

Reel diameter 330 mm 330 mm

Number of pcs per reel: 2000 2000

Number of pcs per box: 10'000 6000

PCB Layout

Product Information IP0001.03.R1

Rev.1 –14/03/01- Page 1/2

Preci-Dip Durtal SA

CH-2800 Delémont / Switzerland

phone +41 (32) 421 04 00 - fax +41 (32) 421 04 01

mail:sales@precidip.com – www.precidip.com

107

PCB Connector Strip 2 mm SMD for automatic assembly

Series 831

1. Description and general features

1.1 General description

The 2 mm receptacle connectors for SMD mount

Series 831-...-30-001191 are now available from

PRECI-DIP with Tape & Reel packaging acc. to EIA

481 Standard and with removable plastic cap for

automatic assembly on the PCB.

They come in single row version with min. 3 and

max. 16 poles.

The max. number of poles is given by the coplanarity

limitations and the width of the existing tape 44 mm.

1.2 Advantages

With the additional plastic cap, automatic assembly

with standard vacuum nozzle is made possible.

1.3 Applications

Specially recommended for high volume applications

on automatic PCB assembly lines.

1.4 Optional versions

Same connector strips also available without Tape &

Reel packaging and plastic cap, please see PRECI-

DIP catalogue 10.

2. Technical Specifications

2.1 Environmental 2.3 Mechanical Characteristics

Operating temperature -55 ... + 125°C

Climatic Category (IEC) 55 / 125 / 21

Accepts pins Diameter 0.40 to 0.56 mm and

0.50 mm square

Solderability 235°C, 5s SMD solder tail Cylindrical 0.53 mm diameter

Resistance to soldering

heat

280°C, 10s Coplanarity SMD

Terminations

0.1 mm (0.15 mm for connectors

with more than 25 mm total

length)

Mechanical life min. 500 cycles

2.2 Materials 2.4 Electrical Characteristics

Contact body Machined brass, plating 5 µm SnPb

over 2.5 µm Ni

Operating voltage 100 VRMS / 150 VDC

Contact spring BeCu, plated 5 µm SnPb or gold

( 0.25 or 0.75 µm) over Ni

Continuous operating

current

max. 1 A per terminal

Contact resistance max. 10 mΩ

Insulation resistance 10'000 MΩ (after climatic tests)Insulator Glass fibre reinforced high

temperature polyester PCT, self-

extinguishing UL94V-0, colour black Dielectric strength 1000 VRMS

Air and creepage distances min. 0.5 mm

Capacitance max. 1 pF

Product Information IP0001.03.R1

Rev.1 –14/03/01- Page 2/2

Preci-Dip Durtal SA

CH-2800 Delémont / Switzerland

phone +41 (32) 421 04 00 - fax +41 (32) 421 04 01

mail:sales@precidip.com – www.precidip.com

108

3. Ordering Information

3.1 Dimensions, Order Number Codes and Packaging Information

Contact Plating Code –PP-: body spring

-91- SnPb Gold 0.25 um

-93- SnPb Gold 0.75 um

-99- SnPb SnPb

Code for number of contacts –0NN- or (Example for 12 poles connector: -012-)

3.1.1 Connector PN 831-PP-0NN-30-001191,

3.2 Availability

Now

Available number of pins: 3 to 16

Packaging:

Tape width 44 mm

Pitch on tape 12 mm

Reel diameter 330 mm

Number of pcs per reel: 750

Number of pcs per box: 3000

PCB La

out

Product Information IP0003.01

Rev. –10/01/01- Page 1/4

Preci-Dip Durtal SA

CH-2800 Delémont / Switzerland

phone +41 (32) 421 04 00 - fax +41 (32) 421 04 01

mail:sales@precidip.com – www.precidip.com

109

2 mm polarised Socket Connector with precision machined

Contacts Series 831 and 833

1. Description and general features

1.1 General description

The series 831 and 833 polarised metric socket

connectors, introduced by PRECI-DIP to complete its

comprehensive range of PCB connectors with 2 mm

pitch, are equipped with machined pins. Polarisation

is given, when mated with the corresponding

shrouded pin connector Series 830 and 832, by the

asymmetric form of the insulator body.

They are available today in single row version with

22 poles and in double row version with 26 and 44

poles.

The terminations are straight through hole solder

pins, SMD pads, and solderless compliant press-fit

pins.

1.2 Advantages

This socket connectors have same characteristics as

the standard metric ones presented in Preci-Dip

catalog No 10 with additional advantages of

polarisation and easier mating.

1.3 Applications

Specially recommended for miniature applications

with limited available space and demanding

mechanical requirements. Design helps connector

mating in place with no direct sight on the

connector, such as:

- Equipment for industrial and process control

- Medical equipment

- Automotive electronics

1.4 Optional versions

For other pin count, between min. 2 and max. 22 per

row, please consult.

2. Technical Specifications

2.1 Environmental 2.3 Mechanical Characteristics

Operating temperature -55 ... + 125°C Accepts pins Diameter 0.40 to 0.56 mm, or

square pins 0.5 x 0.5 mm

Climatic Category (IEC) 55 / 125 / 21 Solder tail Cylindrical, diameter 0.53 mm

Solderability 235°C, 5s Mechanical life min.500 cycles

Resistance to soldering

heat

280°C, 10s Coplanarity SMD terminations 0.1 mm (0.15 mm for

connectors with more than 25

mm total length)

2.2 Materials 2.4 Electrical Characteristics

Contact body Machined brass, tin plating 5 µm

SnPb over 2.5 µm Ni

Operating voltage 100 VRMS / 150 VDC

Press-Fit contact Machined bronze, 1-2 µm SnPb

over 2.5 µm Ni

Continuous operating current max. 3 A per terminal

Contact resistance max 10 mΩ

Contact spring BeCu, plated 5 µm SnPb or gold

(0.25 or 0.75 µm) over Ni Insulation resistance 10'000 MΩ (after climatic tests)

Dielectric strength 700 VRMS

Insulator Glass fibre reinforced liquid crystal

polymer LCP, self-extinguishing

UL94V-0, colour black Air and creepage distances 0.50 mm

Capacitance 1 pF max.

Product Information IP0003.01

Rev. –10/01/01- Page 2/4

Preci-Dip Durtal SA

CH-2800 Delémont / Switzerland

phone +41 (32) 421 04 00 - fax +41 (32) 421 04 01

mail:sales@precidip.com – www.precidip.com

110

3. Ordering Information

3.1 Dimensions, Order Code Numbers and Packaging Information

Contact Plating Code -PP-: -91- Body: tin, Clip: gold 0.25 um

-93- Body: tin, Clip: gold 0.75 um

-99- Body and Clip: tin

Code for number of contacts –0NN-: (example for a 26 poles connector: -026-)

Packaging: Standard packaging: in box: replace xxx by suffix 101 to part number

Tape & Reel packaging: with plastic cap for automatic assembly with vacuum nozzle

available on request for SMD mount version only (min. quantity 10'000 pcs): replace xxx by

suffix 191 to part number

3.1.1 Socket Connector, single row, straight solder pin, PN 831-PP-0NN-10-242xxx

3.1.2 Socket Connector, double row, straight solder pin, PN 833-PP-0NN-10-245xxx

Available number of pins: 22

vailable number of pins: 26 and 44

Product Information IP0003.01

Rev. –10/01/01- Page 3/4

Preci-Dip Durtal SA

CH-2800 Delémont / Switzerland

phone +41 (32) 421 04 00 - fax +41 (32) 421 04 01

mail:sales@precidip.com – www.precidip.com

111

3.1.3 Socket Connector, single row, SMD vertical mount, PN 831-PP-0NN-30-242xxx

PCB layout

3.1.4 Socket connector, double row, SMD mount, PN 833-PP-0NN-30-245xxx

PCB layout

3.1.5 Socket Connector, single row, press-fit mount, PN 831-PP-0NN-64-242xxx

vailable number of pins: 22

Available number of pins: 26

and 44

vailable number of pins: 22

PCB and plated-through hole requirements:

- PCB material Epoxy glass laminate

FR4 or equivalent

- Thickness 1.5 to 2 mm

- Hole diameter 0.71 mm +/- 0.06 mm

- Hole metallisation min. 5 um SnPb over

min. 25 um Cu

Product Information IP0003.01

Rev. –10/01/01- Page 4/4

Preci-Dip Durtal SA

CH-2800 Delémont / Switzerland

phone +41 (32) 421 04 00 - fax +41 (32) 421 04 01

mail:sales@precidip.com – www.precidip.com

112

3.1.6 Socket Connector, double row, press-fit mount, PN 833-PP-0NN-64-245xxx

3.2 Availability

Samples: Second quarter 2001

Volume quantities: Second quarter 2001

vailable number of pins: 26 and 44

PCB and plated-through hole

requirements:

- PCB material Epoxy glass laminate

FR4 or equivalent

- Thickness 1.5 to 2 mm

- Hole diameter 0.71 mm +/- 0.06 mm

- Hole metallisation min. 5 um SnPb over

min. 25 um Cu

Product Information IP0003.02.R1

Rev.1 –22/07/02- Page 1/4

Preci-Dip Durtal SA

CH-2800 Delémont / Switzerland

phone +41 (32) 421 04 00 - fax +41 (32) 421 04 01

mail:sales@precidip.com – www.precidip.com

113

2 mm shrouded Pin Connector with Precision machined

Contacts Series 830 and 832

1. Description and general features

1.1 General description

The series 830 and 832 shrouded metric pin

connectors, introduced by PRECI-DIP to complete its

comprehensive range of PCB connectors with 2 mm

pitch, are equipped with machined pins. Polarisation

is given, when mated with corresponding receptacle

connectors Series 831-...-242 and 833-...-245 with

asymmetric form of the insulator body.

They are available today in single row version with

22 poles and in double row version with 26 and 44

poles.

The terminations are straight and right angle through

hole solder pins and SMD solder pads.

1.2 Advantages

This pin connectors have all advantages of the

machined pins that show a smooth surface in the

contact area allowing a high mechanical life,

combined with the improved mechanical

characteristics of shrouded connector body.

The contacts are available with gold or tin (SnPb

90/10) plating.

1.3 Applications

Specially recommended for miniature applications

with limited available space and demanding

mechanical requirements. Design helps connector

mating in place with no direct sight on the

connector, such as:

- Equipment for industrial and process control

- Medical equipment

- Automotive electronics

1.4 Optional versions

For other pin count, between min. 2 and max. 22 per

row, please consult.

2. Technical Specifications

2.1 Environmental 2.3 Mechanical Characteristics

Operating temperature -55 ... + 125°C Contact pin Cylindrical, diameter 0.47 mm

Climatic Category (IEC) 55 / 125 / 21 Solder tail Cylindrical, diameter 0.50 mm

Solderability 235°C, 5s Mechanical life min.500 cycles

Resistance to soldering

heat

280°C, 10s Coplanarity SMD

terminations

0.1 mm (0.15 mm for connectors

with more than 25 mm total length)

2.2 Materials 2.4 Electrical Characteristics

Contact Machined brass, gold plated 0.25

µm Au or tin plated 5 µm SnPb over

2.5 µm Ni

Operating voltage 100 VRMS / 150 VDC

Continuous operating

current

max. 3 A per terminal

Insulation resistance 10'000 MΩ (after climatic tests)Insulator Glass fibre reinforced liquid crystal

polymere LCP, self-extinguishing

UL94V-0, colour black Dielectric strength 700 VRMS

Air and creepage

distances

min. 0.50 mm

Capacitance max. 1 pF

Product Information IP0003.02.R1

Rev.1 –22/07/02- Page 2/4

Preci-Dip Durtal SA

CH-2800 Delémont / Switzerland

phone +41 (32) 421 04 00 - fax +41 (32) 421 04 01

mail:sales@precidip.com – www.precidip.com

114

3. Ordering Information

3.1 Dimensions, Order Code Numbers and Packaging Information

Contact Plating Code -PP-: -10- Gold 0.25 um

-90- Tin

Code for number of contacts –0NN-: (example for a 26 poles connector: -026-)

Packaging: Standard packaging: in box: replace xxx by suffix 101 to part number

Tape & Reel packaging: with plastic cap for automatic assembly with vacuum nozzle

available on request for SMD mount version only (min. quantity 10'000 pcs): replace xxx by

suffix 191 to part number

3.1.1 Pin Connector,single row, straight solder pin, PN 830-PP-0NN-12-002xxx

3.1.2 Pin Connector, double row, straight solder pin, PN 832-PP-0NN-12-002xxx

Available number of pins: 22

vailable number of

ins: 26 and 44

Product Information IP0003.02.R1

Rev.1 –22/07/02- Page 3/4

Preci-Dip Durtal SA

CH-2800 Delémont / Switzerland

phone +41 (32) 421 04 00 - fax +41 (32) 421 04 01

mail:sales@precidip.com – www.precidip.com

115

3.1.3 Pin Connector, single row, right angle solder pin, PN 830-PP-0NN-22-002xxx

3.1.4 Pin Connector, double row, right angle solder pin, PN 832-PP-0NN-22-002xxx

3.1.5 Pin Connector, single row, SMD vertical mount, PN 830-PP-0NN-32-002xxx

PCB layout

Available number of pins:22

vailable number of

ins: 26 and 44

vailable number of

ins: 22

Product Information IP0003.02.R1

Rev.1 –22/07/02- Page 4/4

Preci-Dip Durtal SA

CH-2800 Delémont / Switzerland

phone +41 (32) 421 04 00 - fax +41 (32) 421 04 01

mail:sales@precidip.com – www.precidip.com

116

3.1.6 Pin Connector, double row, SMD vertical mount, PN 832-PP-0NN-32-002xxx

PCB layout

3.2 Availability

Samples: Second quarter 2001

Volume quantities: Second quarter 2001

vailable number of

ins: 26 and 44

Product Information IP0001.01.R1

Rev.1 –14/05/01- Page 1/2

Preci-Dip Durtal SA

CH-2800 Delémont / Switzerland

phone +41 (32) 421 04 00 - fax +41 (32) 421 04 01

mail:sales@precidip.com – www.precidip.com

117

PCB Connector Strip 2.54 mm SMD for automatic assembly

Series 310 and 410

1. Description and general features

1.1 General description

The Series 310-... , 410-...-105191 and 310-...-

205191 receptacle connectors for SMD mount are

now available from PRECI-DIP with Tape & Reel

packaging acc. to EIA 481 Standard. The vertical

mount series with PN ending with –105191 are with

removable plastic cap for automatic assembly on the

PCB. The horizontal mount series, with PN ending

with –205191, are with a specific insulator without

notch on the upper side.

They come in single row version with min 2 (min 3

poles for vertical mount version) to max 12 poles,

and in double row version (only vertical mount) with

min 10 and max 34 poles.

The max. possible number of poles is given by the

coplanarity limitations and the tape width of 56 mm,

maximum size that PRECI-DIP can process.

1.2 Advantages

With the specific insulator or the additional plastic

cap, automatic assembly with standard vacuum

nozzle is made possible.

1.3 Applications

Specially recommended for high volume applications

on automatic PCB assembly lines.

1.4 Optional versions

Same connector strips also available without Tape &

Reel packaging and plastic cap, please see PRECI-

DIP catalogue 10.

2. Technical Specifications

2.1 Environmental 2.3 Mechanical Characteristics

Operating temperature -55 ... + 125°C Accepts pins Diameter 0.45 to 0.56 mm

Climatic Category (IEC) 55 / 125 / 21

Solderability 235°C, 5s

SMD solder tail Cylindrical 0.52 mm diameter

Resistance to soldering

heat

280°C, 10s Coplanarity SMD

Terminations

0.1 mm (0.15 mm for connectors

with more than 25 mm total

length)

Mechanical life min. 500 cycles

2.2 Materials 2.4 Electrical Characteristics

Contact body Machined brass, plating 5 µm SnPb

over 2.5 µm Ni

Operating voltage 100 VRMS / 150 VDC

Contact spring BeCu, plated 5 µm SnPb or gold

(0.1, 0.25 or 0.75 µm) over Ni

Continuous operating

current

max. 1 A per terminal

Contact resistance max. 10 mΩ

Insulation resistance 10'000 MΩ (after climatic tests)Insulator Glass fibre reinforced high

temperature polyester PCT, self-

extinguishing UL94V-0, colour black Dielectric strength 1000 VRMS

Air and creepage distances min. 0.7 mm

Capacitance max. 0.3 pF

Product Information IP0001.01.R1

Rev.1 –14/05/01- Page 2/2

Preci-Dip Durtal SA

CH-2800 Delémont / Switzerland

phone +41 (32) 421 04 00 - fax +41 (32) 421 04 01

mail:sales@precidip.com – www.precidip.com

118

3. Ordering Information

3.1 Dimensions, Order Number Codes and Packaging Information

Contact Plating Code –PP-: body spring

-91- SnPb Gold 0.25 um

-93- SnPb Gold 0.75 um

-97- SnPb Flash gold

-99- SnPb SnPb

Code for number of contacts –1NN- or -2NN- (Example for a single row 12 poles connector: -112-)

3.1.1 Connector PN 310-PP-1NN-01-105191

3.1.2 Connector PN 310-PP-1NN-41-205191

3.1.3 Connector PN 410-PP-2NN-41-105191

3.2 Availability

Now

Available number of pins: 3 to 12

Packaging:

3 poles 4 to 9 poles 10 to 17 poles

Tape width 16 mm 32 mm 56 mm

Pitch on tape 12 mm 12 mm 12 mm

Reel diameter 330 mm 330 mm 330 mm

Number of pcs per reel: 850 650 650

Number of pcs per box: 4250 1950 1950

PCB Layout

vailable number of pins: 10 to 34

Packaging:

Tape width 56 mm

Pitch on tape 16 mm

Reel diameter 330 mm

Number of pcs per reel: 350

Number of pcs per box: 1050

PCB Layout

Available number of pins: 2 to 8

Packaging:

Tape width 32 mm

Pitch on tape 16 mm

Reel diameter 330 mm

Number of pcs per reel: 1500

Number of pcs per box: 4500

PCB Layout

Dimensions of Pick-and-Place pad

for 3 pole strip

Product Information IP0001.02.R1

Rev.1 –14/05/01- Page 1/2

Preci-Dip Durtal SA

CH-2800 Delémont / Switzerland

phone +41 (32) 421 04 00 - fax +41 (32) 421 04 01

mail:sales@precidip.com – www.precidip.com

119

PCB Connector Strip 2.54 mm SMD for automatic assembly

Series 801 and 803

1. Description and general features

1.1 General description

The SMD receptacle connectors Series 801 / 803 are

now available from PRECI-DIP with Tape & Reel

packaging acc. to EIA 481 Standard.

The horizontal mount Series 801-...-40-001191 are

with a specific insulator without notch on the upper

side, and the vertical mount Series 803-...-30-

001191 (height over PCB = 8.6 mm) and 803-...-30-

002191 (height over PCB = 5.6 mm) are with

removable plastic cap for automatic assembly on the

PCB.

They come in single row version from min. 2 to max.

8 poles and in double row version with min. 10 and

max. 34 poles.

The max. possible number of poles is given by the

coplanarity limitations and the tape width of 56 mm,

maximum size that PRECI-DIP can process.

1.2 Advantages

With the specific insulator body or the additional

plastic cap, automatic assembly with standard

vacuum nozzle is made possible.

1.3 Applications

Specially recommended for high volume applications

on automatic PCB assembly lines.

1.4 Optional versions

Same connector strips also available without Tape &

Reel packaging and plastic cap, please see PRECI-

DIP catalogue 10.

2. Technical Specifications

2.1 Environmental 2.3 Mechanical Characteristics

Operating temperature -55 ... + 125°C Accepts pins Diameter 0.70 to 0.80 mm and

0.635 mm square

Climatic Category (IEC) 55 / 125 / 21 SMD solder tail Cylindrical 0.60 mm diameter

Solderability 235°C, 5s

Resistance to soldering

heat

280°C, 10s

Coplanarity SMD

Terminations

0.1 mm (0.15 mm for connectors

with more than 25 mm total

length)

Mechanical life min. 500 cycles

2.2 Materials 2.4 Electrical Characteristics

Contact body Machined brass, plating 5 µm SnPb

over 2.5 µm Ni

Operating voltage 100 VRMS / 150 VDC

Contact spring BeCu, plated 5 µm SnPb or gold

( 0.25 or 0.75 µm) over Ni

Continuous operating

current

max. 3 A per terminal

Contact resistance max. 10 mΩ

Insulation resistance 10'000 MΩ (after climatic tests)Insulator Glass fibre reinforced high

temperature polyester PCT, self-

extinguishing UL94V-0, colour black Dielectric strength 1000 VRMS

Air and creepage distances min. 0.7 mm

Capacitance max. 0.3 pF

Product Information IP0001.02.R1

Rev.1 –14/05/01- Page 2/2

Preci-Dip Durtal SA

CH-2800 Delémont / Switzerland

phone +41 (32) 421 04 00 - fax +41 (32) 421 04 01

mail:sales@precidip.com – www.precidip.com

120

3. Ordering Information

3.1 Dimensions, Order Number Codes and Packaging Information

Contact Plating Code –PP-: body spring

-91- SnPb Gold 0.25 um

-93- SnPb Gold 0.75 um

-99- SnPb SnPb

Code for number of contacts –0NN- (Example for 12 poles connector: -012-)

3.1.1 Connector PN 801-PP-0NN-40-001191

3.1.2 Connector PN 803-PP-0NN-30-001191

3.1.3 Connector PN 803-PP-0NN-30-002191

3.2 Availability

Now

vailable number of pins: 10 to 34

Packaging:

Tape width 56 mm

Pitch on tape 16 mm

Reel diameter 330 mm

Number of pcs per reel: 350

Number of pcs per box: 1050

vailable number of pins: 10 to 34

Packaging:

Tape width 56 mm

Pitch on tape 16 mm

Reel diameter 330 mm

Number of pcs per reel: 350

Number of pcs per box: 1050

vailable number of pins: 2 to 8

Packaging:

Tape width 32 mm

Pitch on tape 16 mm

Reel diameter 330 mm

Number of pcs per reel: 1300

Number of pcs per box: 3900

PCB layout

Product Information IP0003.04

Rev. –10/05/01- Page 1/2

Preci-Dip Durtal SA

CH-2800 Delémont / Switzerland

phone +41 (32) 421 04 00 - fax +41 (32) 421 04 01

mail:sales@precidip.com – www.precidip.com

121

Pin Connector with Precision machined Contacts for SMD

mount Series 350

1. Description and general features

1.1 General description

The Series 350-...-106191 receptacle connectors for

vertical SMD mount are now available from PRECI-

DIP with Tape & Reel packaging acc. to EIA 481

Standard, and with removable plastic cap for

automatic assembly on the PCB.

They come with min 3 poles to max 10 poles. The

max. possible number of poles is given by the

coplanarity limitations and the tape width of 56 mm,

maximum size that PRECI-DIP can process. Further

to gold and tin plated version, the connectors are

available with Preci-Dip original Bi-Bloc selective

plated contacts.

1.2 Advantages

With the additional plastic cap, automatic assembly

with standard vacuum nozzle is made possible.

1.3 Applications

Specially recommended for high volume applications

on automatic PCB assembly lines.

1.4 Optional versions

Same connector strips also available without Tape &

Reel packaging and plastic cap, please see PRECI-

DIP catalogue 10.

2. Technical Specifications

2.1 Environmental 2.3 Mechanical Characteristics

Operating temperature -55 ... + 125°C Contact pin Cylindrical, diameter 0.47 mm

Climatic Category (IEC) 55 / 125 / 21 Solder tail Cylindrical, diameter 0.47 mm

Solderability 235°C, 5s Mechanical life min.500 cycles

Resistance to soldering

heat

280°C, 10s Coplanarity SMD

terminations

0.1 mm

2.2 Materials 2.4 Electrical Characteristics

Contact Machined brass, gold plated 0.25

µm Au or tin plated 5 µm SnPb over

2.5 µm Ni

Operating voltage 100 VRMS / 150 VDC

Continuous operating

current

max. 3 A per terminal

Insulation resistance 10'000 MΩ (after climatic tests)Insulator Glass fibre reinforced high

temperature polyester PCT, self-

extinguishing UL94V-0, colour black Dielectric strength 10'00 VRMS

Air and creepage

distances

min. 0.70 mm

Capacitance max. 0.3 pF

Product Information IP0003.04

Rev. –10/05/01- Page 2/2

Preci-Dip Durtal SA

CH-2800 Delémont / Switzerland

phone +41 (32) 421 04 00 - fax +41 (32) 421 04 01

mail:sales@precidip.com – www.precidip.com

122

3. Ordering Information

3.1 Dimensions, Order Code Numbers and Packaging Information

Contact Plating Code -PP-: -10- Gold 0.25 um

-90- Tin

-Z1- Selective plating: contacting area gold 0.25 um

solder pin, body: tin

Code for number of contacts –1NN-: (example for a 6 poles connector: -106-)

3.1.1 Pin Connector,single row, straight solder pin, PN 350-PP-1NN-00-106191

3.2 Availability

Now

PCB Layout

Available number of pins: 3 to 10

Packaging:

Tape width 44 mm

Pitch on tape 12 mm

Reel diameter 330 mm

Number of pcs per reel: 550

Number of pcs per box: 1100

Product Information IP0000.01.R1

Rev. 1 –15/05/01- Page 1/4

Preci-Dip Durtal SA

Preci-Dip Durtal SAPreci-Dip Durtal SA

Preci-Dip Durtal SA

CH-2800 Delémont / Switzerland

phone +41 (32) 421 04 00 - fax +41 (32) 421 04 01

mail:sales@precidip.com – www.precidip.com

123

Shrouded Pin Header/Connector with Precision Machined Contacts

Series 800 to 804

1. Description and general features

1.1 General description

The series 800 to 804 shrouded pin connectors,

introduced by PRECI-DIP to complete its

comprehensive range of PCB connectors with 2.54

mm pitch, are equipped with machined pins.

They come in single, double and triple row version

with max 32 poles per row.

The available terminations are straight and right

angle solder pins, SMD and press-fit solderless.

1.2 Advantages

This pin connectors have all advantages of the

machined pins that show a smooth surface in the

contact area allowing a high mechanical life,

combined with the improved mechanical

characteristics of shrouded connector body.

The contacts are available with the original PRECI-

DIP selective plating system for machined contacts.

1.3 Applications

Specially recommended for applications with higher

mechanical requirements and to help connector

mating in places with no direct sight on the

connector, such as:

- Equipment for industrial and process control

- Medical equipment

- Automotive electronics

1.4 Optional versions

Currently none

2. Technical Specifications

2.1 Environmental 2.3 Mechanical Characteristics

Operating temperature -55 ... + 125°C Contact pin Cylindrical, diameter 0.75 mm

Climatic Category (IEC) 55 / 125 / 21 Solder tail Cylindrical, diameter 0.60 mm

Solderability 235°C, 5s Mechanical life min.500 cycles

Resistance to soldering

heat

280°C, 10s (280 °c, 10 S for SMD

versions)

Press-Fit compliant pin Modified "eye of the needle" for

PCB holes 1 + 0.09 / - 0.04 mm

2.2 Materials 2.4 Electrical Characteristics

Contact Machined brass, 4-5 µm SnPb or

0.25 µm Au over 2.5 µm Ni

Operating voltage 100 VRMS / 150 VDC

Press-Fit contact Machined bronze, 1-2µm SnPb or

0.25 µm Au over 2.5 µm Ni

Continuous operating

current

max. 3 A per terminal

Insulation resistance 10'000 MΩ (after climatic tests)Insulator Glass fibre reinforced high

temperature polyester PCT, self-

extinguishing UL94V-0, black Dielectric strength 1000 VRMS

Air and creepage

distances

min. 0.70 / 0.85 mm

Capacitance max. 1 pF

Product Information IP0000.01.R1

Rev. 1 –15/05/01- Page 2/4

Preci-Dip Durtal SA

Preci-Dip Durtal SAPreci-Dip Durtal SA

Preci-Dip Durtal SA

CH-2800 Delémont / Switzerland

phone +41 (32) 421 04 00 - fax +41 (32) 421 04 01

mail:sales@precidip.com – www.precidip.com

124

3. Ordering Information

3.1 Dimensions, Order Number Codes and Packaging Information

Contact plating code –PP-:

-10- Gold 0.25 um

-90- SnPb

-Z1- selective "Bi-bloc" Gold 0.25 um contacting pin / SnPb termination

Code for number of contacts: -NNN- (example for a 50 poles connector –050-)

Packaging: Standard in box

for SMD connectors, Tape & Reel Packaging on request (min. quantity per order 10'000 pcs)

3.1.1 Pin connector, solder tail

ingle row PN 800-PP-NNN-12-002101

Available from 2 to 32 pins

tandard number of pins: 32

Double row PN 802-PP-NNN-12-002101

Available from 4 to 64 pins

Standard number of pins: 64

riple row PN 804-PP-NNN-12-002101

Available from 9 to 96 pins

Standard number of pins: 96

Product Information IP0000.01.R1

Rev. 1 –15/05/01- Page 3/4

Preci-Dip Durtal SA

Preci-Dip Durtal SAPreci-Dip Durtal SA

Preci-Dip Durtal SA

CH-2800 Delémont / Switzerland

phone +41 (32) 421 04 00 - fax +41 (32) 421 04 01

mail:sales@precidip.com – www.precidip.com

125

3.1.2 Pin connector right angle solder tail

3.1.3 Pin connector SMD vertical mount

ingle row PN 800-PP-NNN-22-002101

Available from 2 to 32 pins

Standard number of pins: 32

Double row PN 802-PP-NNN-22-002101

Available from 4 to 64 pins

Standard number of pins: 64

riple row PN 804-PP-NNN-22-002101

Available from 9 to 96 pins

Standard number of pins: 96

Single row PN 800-PP-NNN-32-002101

Available from 3 to 32 pins

Standard number of pins: 32

PCB Layout

Product Information IP0000.01.R1

Rev. 1 –15/05/01- Page 4/4

Preci-Dip Durtal SA

Preci-Dip Durtal SAPreci-Dip Durtal SA

Preci-Dip Durtal SA

CH-2800 Delémont / Switzerland

phone +41 (32) 421 04 00 - fax +41 (32) 421 04 01

mail:sales@precidip.com – www.precidip.com

126

3.1.4 Pin connector Press-Fit compliant pin

3.2 Availability

Now

Double row PN 802-PP-NNN-32-002101

Available from 4 to 64 pins

Standard number of pins 64

PCB Layout

PCB and plated-through hole requirements:

-PCB Material Epoxy-glass laminate FR4 or equivalent

-Thickness 1.5 to 2 mm

-Hole diameter 1 mm + 0.09/-0.06 mm

-Hole metallisation min. 5 um SnPb over min. 25 um Cu

Single row PN 800-PP-NNN-6B-002101

Available from 2 to 32 pins

Standard number of pins 32

Double row PN 802-PP-NNN-6B-002101

Available from 4 to 64 pins

Standard number of pins 64

Triple row PN 804-PP-NNN-6B-002101

Available from 9 to 96 pins

Standard number of pins 96

Product Information IP0001.05.R1

Rev. 1–14/05/01- Page 1/3

Preci-Dip Durtal SA

CH-2800 Delémont / Switzerland

phone +41 (32) 421 04 00 - fax +41 (32) 421 04 01

mail:sales@precidip.com – www.precidip.com

127

DIL socket SMD for automatic assembly

Series 110 and 114

1. Description and general features

1.1 General description

The DIL sockets for SMD mount Series 110-...-

105191 (with "gull wing" terminations) and 114-...-

134191 (with floating pin design) are now available

from PRECI-DIP with Tape & Reel packaging acc. to

EIA 481 Standard for automatic assembly on the

PCB.

The Series 110 come with min. 8 and max. 20 poles

and row distance .3" (7.62 mm). The Series 114

come with 8 to 28 poles for row distance .3" (7.62

mm) and 28 poles for row distance .6" (15.24 mm).

The max. possible number of poles is given, for the

Series 110 by the coplanarity limitations, and for the

Series 114 by the tape width of 56 mm, maximum

size that PRECI-DIP can process.

1.2 Advantages

The plastic body with the wide center bar, placed at

the top of the socket, is optimised for automatic

assembly with standard vacuum nozzle.

1.3 Applications

Specially recommended for high volume applications

on automatic PCB assembly lines.

1.4 Optional versions

Same sockets also available without Tape & Reel

packaging, please see PRECI-DIP catalogue 10.

2. Technical Specifications

2.1 Environmental 2.3 Mechanical Characteristics

Operating temperature -55 ... + 125°C Accepts pins Diameter 0.40 to 0.56 mm

Climatic Category (IEC) 55 / 125 / 21

Solderability 235°C, 5s

SMD solder tail Gull wing: cylindrical 0.52 mm diameter

Floating pin: diameter 1 mm

Resistance to soldering

heat

280°C, 10s Coplanarity SMD

Terminations

Gull wing: 0.1 mm

The floating pins are self-aligning within

0.3 mm to the surface of the PCB

Mechanical life min. 500 cycles

2.2 Materials 2.4 Electrical Characteristics

Contact body Machined brass, plating 5 µm SnPb

over 2.5 µm Ni

Operating voltage 100 VRMS / 150 VDC

Contact spring BeCu, plated 5 µm SnPb or gold

(0.1, 0.25 or 0.75 µm) over Ni

Continuous operating

current

max. 1 A per terminal

Contact resistance max. 10 mΩ

Insulation resistance 10'000 MΩ (after climatic tests)

Insulator Glass fibre reinforced high

temperature polyester PCT, self-

extinguishing UL94V-0, colour black Dielectric strength 1000 VRMS

Air and creepage

distances

min. 0.6 mm

Capacitance max. 0.3 pF

Product Information IP0001.05.R1

Rev.1 –14/05/01- Page 2/3

Preci-Dip Durtal SA

CH-2800 Delémont / Switzerland

phone +41 (32) 421 04 00 - fax +41 (32) 421 04 01

mail:sales@precidip.com – www.precidip.com

128

3. Ordering Information

3.1 Dimensions, Order Number Codes and Packaging Information

Contact Plating Code –PP-: body spring

-91- SnPb Gold 0.25 um

-93- SnPb Gold 0.75 um

-99- SnPb SnPb

3.1.1 SMD socket Gull-wing PN 110-PP-3NN-41-105191

3.1.2 SMD socket floating-pin PN 114-PP-3NN-41-134191

Available number of pins: 8, 14, 16, 18 and 20

PCB Layout

Code Number of Contacts –3NN-

Dimensions[mm]:

Number of pins A B C

308 10.1 3 x 2.54 10.1

314 17.8 6 x 2.54 5.3

316 20.3 7 x 2.54 5.3

318 22.9 8 x 2.54 5.3

320 25.4 9 x 2.54 8.3

Packaging: 308 314 to 320

Tape width 24 mm 44 mm

Pitch on tape 16 mm 20 mm

Reel diameter 330 mm 330 mm

Number of pcs per reel: 700 550

Number of pcs per box: 2100 2200

Code Number of Contacts –3NN-

Dimensions[mm]:

Number of pins A B C

308 10.1 3 x 2.54 10.1

314 17.8 6 x 2.54 5.3

316 20.3 7 x 2.54 5.3

318 22.9 8 x 2.54 5.3

320 25.4 9 x 2.54 8.3

324 30.4 11 x 2.54 8.3

328 35.6 13 x 2.54 8.3

Packaging: 308 to 328

Tape width 56 mm

Pitch on tape 16 mm

Reel diameter 330 mm

Number of pcs per reel: 800

Number of pcs per box: 2400

vailable number of pins: 8, 14, 16, 18, 20, 24

and 28

PCB Layout

Product Information IP0001.05.R1

Rev.1 –14/05/01- Page 3/3

Preci-Dip Durtal SA

CH-2800 Delémont / Switzerland

phone +41 (32) 421 04 00 - fax +41 (32) 421 04 01

mail:sales@precidip.com – www.precidip.com

129

3.13 SMD socket floating pin PN 114-PP-6NN-41-134191

3.2 Availability

Now

Available number of pins: 28

Code Number of Contacts –6NN-,

Dimensions[mm]:

Number of pins A B C

628 35.5 13 x 2.54 10

Packaging:

Tape width 56 mm

Pitch on tape 24 mm

Reel diameter 330 mm

Number of pcs per reel: 400

Number of pcs per box: 1200

PCB Layout

Product Information IP9901.02.R1

Rev.1 –17/05/01- Page 1/2

Preci-Dip Durtal SA

CH-2800 Delémont / Switzerland

phone +41 (32) 421 04 00 - fax +41 (32) 421 04 01

mail:sales@precidip.com – www.precidip.com

130

SMD Sockets for interstitial Pin Grid Arrays

Series 514-...154

1. Description and general features

1.1 General description

Interstitial PGA sockets come with floating SMD

contacts which are self-adjusting with the solder

pads, even with slightly distorted PCBs.

The contact diameter at the soldering end is 0.8 mm,

allowing solder pads of 0.9 mm diameter which

leaves sufficient space between the connections for

the conductive paths of the circuit.

1.2 Advantages

Interstitial PGA sockets are adapted to new Pin Grid

Array microcircuit packages with high contact density

and make an optimal interface connection to SMD

PCBs, avoiding the combination of SMD components

with parts requiring through hole connections on the

same circuit. This greatly improves the efficiency of

the assembling and soldering processes.

1.3 Applications

SMD printed circuit assemblies of all kinds requiring

integration of components having PGA packages.

Specially recommended for manufacturing equipment

with high production rates.

1.4 Optional versions

Optional version with positioning pins available on

request

2. Technical Specifications

2.1 Environmental 2.3 Mechanical Characteristics

Operating temperature -55 ... + 125°C Insertion force (initial) 0.6 N max. / 0.35 N typical, with

polished steel gauge ∅ 0.46 mm

Climatic Category (IEC) 55 / 125 / 21 Withdrawal force (initial) 0.15 N min / 0.2 N typical with

polished steel gauge ∅ 0.46 mm

Solderability 235°C, 10s Contact spring (clip)

retention

40 N minimum

Resistance to soldering

heat

280°C, 10s Mechanical life 100 cycles

2.2 Materials 2.4 Electrical Characteristics

Contact body Machined brass, plating 5 µm SnPb

over 2.5 µm Ni

Operating voltage 100 VRMS / 150 VDC

Contact spring BeCu, gold plated (0.1, 0.25 or 0.75

µm) over Ni

Continuous operating

current

max. 1 A per terminal

Contact resistance max. 10 mΩInsulator Glass fibre reinforced high

temperature polyester PCT, self-

extinguishing UL94V-0, colour black Insulation resistance 10'000 MΩ (after climatic tests)

Dielectric strength 700 VRMS

Air and creepage distances min. 0.3 mm

Capacitance max. 1 pF

Self inductance 2 nH max.

Product Information IP9901.002.R1

Rev. 1–17/05/01- Page 2/2

Preci-Dip Durtal SA

CH-2800 Delémont / Switzerland

phone +41 (32) 421 04 00 - fax +41 (32) 421 04 01

mail:sales@precidip.com – www.precidip.com

131

3. Ordering Information

3.1 Dimensions, Order Code Numbers and Packaging Information

Contact Plating Code –PP-: body spring

-91- SnPb Gold 0.25 um

-93- SnPb Gold 0.75 um

-97- SnPb Flash gold

Code for number of contacts –NNN- = total number of contacts

Code for wafer size –XX-: available for 14 and from 17 to 22

Code for contact arangement and window size –YYY-: see Preci-Dip catalog

3.1.1 PGA socket PN 514-PP-NNN-XX-YYY154

3.3 Availability

Now

Product Information IP9901.03.R1

Rev. 1 –17/05/01- Page 1/2

Preci-Dip Durtal SA

CH-2800 Delémont / Switzerland

phone +41 (32) 421 04 00 - fax +41 (32) 421 04 01

mail:sales@precidip.com – www.precidip.com

132

Press-fit Mount Sockets for Interstitial Pin Grid Arrays

Series 546-...147

1. Description and general features

1.1 General description

Press-fit mount interstitial PGA sockets come with

solderless press-fit terminations. This product line is

based on the standard press-fit PGA sockets.

The press-fit terminations are a modified version of

the «eye of the needle» technology, but adapted to

PCB plated through holes with 0.7 mm diameter after

metallisation.

1.2 Advantages

With only 0.85 mm drill dia. the space available for

the conductive paths passing between contacts

increases by 30% which greatly facilitates the PCB

layout.

Assembly of this new PGA is as easy as with the

other press-fit versions and the tooling requirements

are quite simple: a tool head of the flat rock type,

and a support plate with the same hole configuration

as the PCB.

Solderless press-fit technology eliminates the second

soldering process normally necessary on PCBs with

mixed technology which means that thermal stress

on the components is cut to half.

Press-fit connections have excellent long term

stability and are recommended for use under difficult

environmental conditions.

1.3 Applications

Most benefits when used in SMD electronic

assemblies and sub-assemblies where components in

PGA packages cannot be replaced.

Covers all of the currently used interstitial PGA

configurations, particularly those of the Pentium

microprocessor family and the most common ASICs

1.4 Optional versions

Sockets with press-fit terminations for PCB holes of

0.9 +0.07/-0.05 mm diameter are available on

request.

2. Technical Specifications

2.1 Environmental 2.3 Mechanical Characteristics

Operating temperature -55 ... + 125°C Insertion force (initial) 0.6 N max. / 0.35 N typical, with

polished steel gauge ∅ 0.46 mm

Climatic Category (IEC) 55 / 125 / 21 Withdrawal force (initial) 0.15 N min / 0.2 N typical with

polished steel gauge ∅ 0.46 mm

Solderability NA Contact spring (clip)

retention

40 N minimum

Resistance to soldering

heat

NA Mechanical life 100 cycles

2.2 Materials 2.4 Electrical Characteristics

Contact body Machined bronze, plating 5 µm

SnPb over 2.5 µm Ni

Operating voltage 100 VRMS / 150 VDC

Contact spring BeCu, gold plated (0.1, 0.25 or 0.75

µm) over Ni

Continuous operating

current

max. 1 A per terminal

Contact resistance max. 10 mΩ

Insulation resistance 10'000 MΩ (after climatic tests)

Insulator Glass fibre reinforced high

temperature polyester PCT, self-

extinguishing UL94V-0, colour black

Dielectric strength 700 VRMS

Air and creepage

distances

min. 0.3 mm

Capacitance max. 1 pF

Product Information IP9901.03.R1

Rev. 1 –17/05/01- Page 2/2

Preci-Dip Durtal SA

CH-2800 Delémont / Switzerland

phone +41 (32) 421 04 00 - fax +41 (32) 421 04 01

mail:sales@precidip.com – www.precidip.com

133

3. Ordering Information

3.1 Dimensions, Order Code Numbers and Packaging Information

Contact Plating Code –PP-: body spring

-91- SnPb Gold 0.25 um

-93- SnPb Gold 0.75 um

-97- SnPb Flash gold

Code for number of contacts –NNN- = total number of contacts

Code for wafer size –XX-: available for 14 and from 17 to 22

Code for contact arangement and window size –YYY-: see Preci-Dip catalog

3.1.1 PGA socket PN 546-PP-NNN-XX-YYY147

Press-fit characteristics

(PCB and plated trough-hole specification)

PCB material: Epoxy-glass laminate FR4 or equivalent

Board thickness 1.2 – 2.5 mm

Drill diameter 0.85 +/-0.025 mm

Hole diameter 0.7 +0.07/-0.05 mm after metallisation

Hole metallisation 5 µm min. SnPb over 25 µm Cu

Push-in force 50 N average with 0.7 mm diameter hole; 80 N max. with min. diameter hole

Push-out force 25 N average with 0.7 mm diameter hole; 10 N min. with max diameter hole

3.2 Availability

Now

Product Information IP9901.05R1

Rev. 1–04/09/01- Page 1/2

Preci-Dip Durtal SA

CH-2800 Delémont / Switzerland

phone +41 (32) 421 04 00 - fax +41 (32) 421 04 01

mail:sales@precidip.com – www.precidip.com

134

Sockets and adapter for 1.27 mm Ball Grid Array

Series 514, 550 and 558

1. Description and general features

1.1 General description

The BGA adapter is a two part socket design for

applications where direct soldering of the device

cannot be accepted. The two components are:

- a SMD socket with floating contacts with the same

footprint as the BGA device.

- an adapter with solder pads for the balls on the

top side and pins on the bottom side.

The BGA is soldered on the adapter and than can be

plugged into the sockets attached to the PCB.

For interconnect applications, the SMD PCB adapter

is soldered to the daughter board, making it

pluggable into the socket soldered to the mother

board

1.2 Advantages

The best way to make BGA pluggable on PCB

without layout design change.

The socket and PCB adapter provide a high density

and low profile board interconnect system.

1.3 Applications

For testing, debugging and pre-productions runs of

boards with BGA devices, and for PCB

interconnection.

1.4 Optional versions

BGA socket and adapter with 1.50 mm grid.

PCB adapter with through hole terminations and 1.27

mm grid Series 558-...-101.

2. Technical Specifications

2.1 Environmental 2.3 Mechanical Characteristics

Operating temperature -55 ... + 125°C Insertion force (initial) 0.3 N max. / 0.2 N typical, with

polished steel gauge ∅ 0.43 mm

Climatic Category (IEC) 55 / 125 / 21 Withdrawal force (initial) 0.07 N min / 0.1 N typical with

polished steel gauge ∅ 0.43 mm

Solderability 235°C, 10s Contact spring (clip)

retention

20 N minimum

Mechanical life 100 cycles

Resistance to soldering

heat

280°C, 10s

Coplanarity 0.1 mm

2.2 Materials 2.4 Electrical Characteristics

Operating voltage 50 VRMS / 60 VDC

Socket contact body Machined brass, plating 5 µm SnPb

over 2.5 µm Ni Cont. operating current max. 1 A per terminal

Contact spring BeCu, gold plated gold ( 0.25 or

0.75 µm) over Ni

Contact resistance max. 10 mΩ

Insulation resistance 10'000 MΩ (after climatic tests)Adapter pin Machined brass, plating 0.25 µm

gold over 2.5 µm Ni Dielectric strength 500 VRMS

Insulator Glass-epoxy laminate FR4, self-

extinguishing UL94V-0

Air and creepage

distances

min. 0.17 mm

Capacitance max. 1 pF

Self inductance 2 nH max.

Product Information IP9901.05R1

Rev 1.–04/09/01 - Page 2/2

Preci-Dip Durtal SA

CH-2800 Delémont / Switzerland

phone +41 (32) 421 04 00 - fax +41 (32) 421 04 01

mail:sales@precidip.com – www.precidip.com

135

3. Ordering Information

3.1 Dimensions, Order Code Numbers and Packaging Information

Code for number of contacts –NNN- = total number of contacts

Code for wafer size –XX-: available from 16 to 35

Code for contact arangement –YYY-: please consult

3.1.1 BGA socket PN 514-PP-NNNMXX-YYY148

Contact Plating Code –PP-: body spring

-91- SnPb Gold 0.25 um

-93- SnPb Gold 0.75 um

3.1.2 BGA adapter PN 550-PP-NNNMXX-YYY166

Contact Plating Code –PP-: pin

-10- Gold 0.25 um

3.1.3 PCB adapter PN 558-PP-NNNMXX-YYY104

Contact plating code –PP-: pin

-10- Gold 0.25 um

3.2 Availability

Now

Product Information IP0002.01.R1

Rev.1 –14/03/01- Page 1/2

Preci-Dip Durtal SA

CH-2800 Delémont / Switzerland

phone +41 (32) 421 04 00 - fax +41 (32) 421 04 01

mail:sales@precidip.com – www.precidip.com

136

Low Profile Spring Loaded Contact

1. Description and general features

1.1 General description

Miniature, low profile, spring loaded SMD contact for

applications demanding high current capacity, low

electrical contact resistance and high cycle count.

Contact height available from 3.50 to 7.5 mm at initial

position.

1.2 Advantages

Screw-machined pogo contact design optimised for low

electrical contact resistance and high current capacity.

SMD contact with min. PCB space requirements.

Long working stroke (1.4 mm) despite of low profile.

1.3 Applications

Best solution for battery or battery loader connector

for:

- mobile telephone and radio

- portable data processing and data acquisition

equipment

- medical equipment

- test and measurement equipment

1.4 Optional versions

Currently none

2. Technical Specifications

2.1 Environmental 2.3 Mechanical Characteristics

Operating temperature -55 ... + 85°C

Climatic Category (IEC) 55 / 85 / 21

Total working travel 1.4 mm

1.15 mm for initial height 4.5 mm

Solderability 235°C, 5s Spring force (initial) 0.25 N

Resistance to soldering

heat

280°C, 10s Spring force

(at nominal position)

0.60 N at 0.7 mm stroke

Mechanical life min. 40'000 cycles

2.2 Materials 2.4 Electrical Characteristics

Contact piston Machined brass, plating 0.5 µm Au

over 2.5 µm Ni

Operating voltage 100 VRMS / 150 VDC

Contact termination Machined brass, plating 0.5 µm Au

over 2.5 µm Ni

Operating current

(per terminal)

max. 2 A continuous

max. 3 A peak

Spring Music wire, plating Flash Au Contact resistance max. 20 mΩ

Product Information IP0002.01.R1

Rev.1 –14/03/01- Page 2/2

Preci-Dip Durtal SA

CH-2800 Delémont / Switzerland

phone +41 (32) 421 04 00 - fax +41 (32) 421 04 01

mail:sales@precidip.com – www.precidip.com

137

3. Ordering Information

3.1 Dimensions, Order Code Numbers and Packaging Information

Contact Plating Code: only available in the above given combination as standard

Packaging: Standard packaging: in box

3.1.1 Low profile SMD spring loaded Contact PN 900xx-AS

3.2 Availability

Now

Initial height Stroke Part Number

A [mm] B [mm]

3.50 1.00 90041-AS

4.25 1.40 90022-AS

4.5 1.40 90023-AS

5 1.40 90024-AS

5.5 1.40 90025-AS

6 1.40 90026-AS

6.5 1.40 90027-AS

7 1.40 90028-AS

7.5 1.40 90029-AS

Product Information IP0002.02.R1

Rev.1 –14/03/01- Page 1/2

Preci-Dip Durtal SA

CH-2800 Delémont / Switzerland

phone +41 (32) 421 04 00 - fax +41 (32) 421 04 01

mail:sales@precidip.com – www.precidip.com

138

Spring Loaded Contact

1. Description and general features

1.1 General description

Miniature spring loaded contact with minimum

diameter for applications demanding high current

capacity, low electrical contact resistance and high

cycle count.

Outside diameter smaler than 1 mm allowing contact

arrangement on pitch as small as 1.25 mm for

multiway connector.

1.2 Advantages

Screw-machined pogo contact design with internal

sliding contact spring, optimised for low electrical

contact resistance and high current capacity.

Contact termination PCB solder pin and solder cup for

wire attachement.

Long working stroke: 1.4 mm.

1.3 Applications

Best solution for miniature high cycle count connectors

in mobile and portable applications:

- mobile telephone and radio

- portable data processing and data acquisition

equipment

- medical equipment

- test and measurement equipment

1.4 Optional versions

Currently none

2. Technical Specifications

2.1 Environmental 2.3 Mechanical Characteristics

Operating temperature -55 ... + 85°C

Climatic Category (IEC) 55 / 85 / 21

Total working travel 1.4 mm

Solderability 235°C, 5s Spring force (initial) 0.25 N

Resistance to soldering

heat

280°C, 10s Spring force

(at nominal position)

min. 0.80 N at 1 mm stroke

Mechanical life min. 40'000 cycles

2.2 Materials 2.4 Electrical Characteristics

Contact piston Machined brass, plating 0.5 µm Au

over 2.5 µm Ni

Operating voltage 100 VRMS / 150 VDC

Contact termination Machined brass, plating 5 µm SnPb

over 2.5 µm Ni

Operating current

(per terminal)

max. 1 A continuous

max. 2 A peak

Spring Stainless steel Contact resistance max. 20 mΩ

Product Information IP0002.02.R1

Rev.1 –14/03/01- Page 2/2

Preci-Dip Durtal SA

CH-2800 Delémont / Switzerland

phone +41 (32) 421 04 00 - fax +41 (32) 421 04 01

mail:sales@precidip.com – www.precidip.com

139

3. Ordering Information

3.1 Dimensions, Order Code Numbers and Packaging Information

Contact Plating Code: only available in the above given combination as standard

Packaging: Standard packaging: box

3.1.1 Spring loaded Contact, ultra thin with straight solder pin termination PN 90014-AS

3.1.2 Spring loaded Contact, ultra thin with solder cup termination PN 90049-AS

3.2 Availability

Now

Main dimensions

Recommendation for contact cavity

Main dimensions

Recommendation for contact cavity

Product Information IP0000.02.R1

Rev. 1 –15/05/01- Page 1/2

Preci-Dip Durtal SA

CH-2800 Delémont / Switzerland

phone +41 (32) 421 04 00 - fax +41 (32) 421 04 01

mail:sales@precidip.com – www.precidip.com

140

Modular Low Profile Spring Loaded Connector Series 811 and 813

1. Description and general features

1.1 General description

Miniature spring loaded connector for applications

demanding high current capacity, low electrical contact

resistance and high cycle count.

Protected pogo contacts with high mechanical

strength.

Modular systems with a contact pitch of 2.54 mm, with

max. 10 contacts on one row or max. 20 contacts on a

double row arrangement.

Connector height available from 4.5 to 7.5 mm at

initial position.

Available with Tape & Reel packaging and plastic cap

for automatic assembly with vacuum nozzle.

1.2 Advantages

Screw-machined pogo contact design optimised for low

electrical contact resistance and high current capacity.

SMD connector with min. PCB space requirements.

Long working stroke (1.4 mm) despite of low profile.

1.3 Applications

The modular design makes these connectors the ideal

solution for low to medium volume applications.

Best solution for battery or battery loader connector

for:

- mobile telephone and radio

- portable data processing and data acquisition

equipment

- medical equipment

- test and measurement equipment

1.4 Optional versions

Currently none

2. Technical Specifications

2.1 Environmental 2.3 Mechanical Characteristics

Operating temperature -55 ... + 85°C

Climatic Category (IEC) 55 / 85 / 21

Total working travel 1.4 mm

1.15 mm for initial height 4.5 mm

Solderability 235°C, 5s Spring force (initial) 0.25 N

Resistance to soldering

heat

280°C, 10s Spring force

(at nominal position)

0.60 N at 0.7 mm stroke

Coplanarity SMD

terminations

0.1 mm

Mechanical life min. 40'000 cycles

2.2 Materials 2.4 Electrical Characteristics

Contact piston Machined brass, plating 0.5 µm Au

over 2.5 µm Ni

Operating voltage 100 VRMS / 150 VDC

Contact termination Machined brass, plating 0.5 µm Au

over 2.5 µm Ni

Operating current

(per terminal)

max. 2 A continuous

max. 3 A peak

Spring Music wire, plating Flash Au Contact resistance max. 20 mΩ

Insulation resistance 10'000 MΩ (after climatic tests)Insulator Glass fibre reinforced high

temperature polyester PCT, self-

extinguishing UL94V-0, colour black Dielectric strength 700 VRMS

Air and creepage

distances

min. 0.7 mm

Capacitance max. 1 pF

Product Information IP0000.02.R1

Rev. 1 –15/05/01- Page 2/2

Preci-Dip Durtal SA

CH-2800 Delémont / Switzerland

phone +41 (32) 421 04 00 - fax +41 (32) 421 04 01

mail:sales@precidip.com – www.precidip.com

141

3. Ordering Information

3.1 Dimensions, Order Code Numbers and Packaging Information

Contact Plating Code: only available in the above given combination as standard

Code for number of contacts: –0NN- (example for an 8 poles connector: -008-)

Packaging: Standard packaging: in box: replace xxx by suffix 101 to part number

Tape & Reel packaging: with plastic cap for automatic assembly with vacuum nozzle:

replace xxx by suffix 191 to part number. Available number of pins see below. Other

number of pins on request (min. quantity 10'000pcs)

3.1.1 Single row SMD mount Connector 811-SS-0NN-30-00xxx

3.1.2 Double row SMD mount Connector 813-SS-0NN-30-00xxxx

3.2 Availability

Now

vailable Number of Pins: 2 to 10

Initial Plastic Part Number

height Body

A [mm] C [mm]

4.5 2.95 811-SS-0NN-30-001xxx

5 2.95 811-SS-0NN-30-002xxx

5.5 2.95 811-SS-0NN-30-003xxx

6 4 811-SS-0NN-30-004xxx

6.5 4 811-SS-0NN-30-005xxx

7 4 811-SS-0NN-30-006xxx

7.5 4 811-SS-0NN-30-007xxx

T&R Packaging: -001191 –002191 to

-007191

Avail. Number of pins 2 to 4 2 to 10

Tape width 16 mm 44 mm

Pitch on tape 8 mm 12 mm

Reel diameter 330 mm 330 mm

Number of pcs per reel: 1300 600

Number of pcs per box: 7500 2400

vailable Number of Pins: 4 to 20

Initial Plastic Part Number

height Body

A [mm] C [mm]

4.5 2.95 813-SS-0NN-30-001xxx

5 2.95 813-SS-0NN-30-002xxx

5.5 2.95 813-SS-0NN-30-003xxx

6 4 813-SS-0NN-30-004xxx

6.5 4 813-SS-0NN-30-005xxx

7 4 813-SS-0NN-30-006xxx

7.5 4 813-SS-0NN-30-007xxx

T&R Packaging: –001191 to -007191

Avail. Number of pins 4 to 16

Tape width 32 mm

Pitch on tape 12 mm

Reel diameter 330 mm

Number of pcs per reel: 600

Number of pcs per box: 1800

Product Information IP0000.03.R1

Rev. 1 –15/05/01- Page 1/2

Preci-Dip Durtal SA

CH-2800 Delémont / Switzerland

phone +41 (32) 421 04 00 - fax +41 (32) 421 04 01

mail:sales@precidip.com – www.precidip.com

142

Chip Card Spring Loaded Connector 8PM-SS-0006-01-913

1. Description and general features

1.1 General description

Miniature connector for standard or miniature sized chip

cards with contacting pads according to ISO 7816

Protected, machined pogo contacts with high life and

low electrical contact resistance.

Basic model for SMD mount without cover or locking

device for free integration into the application.

Available with Tape & Reel packaging for automatic

assembly.

1.2 Advantages

The connector, equipped with screw-machined pogo

contacts, is covering a minimum PCB area, only 12.2 x

9.7 mm2.

The very low profile with a typical working height of

only 3.75 mm is combined with an improved working

stroke of 1 mm.

1.3 Applications

Particularly well adapted for all kind of mobile

equipment where space is a critical factor.

1.4 Optional versions

Currently none.

2. Technical Specifications

2.1 Environmental 2.3 Mechanical Characteristics

Operating temperature -55 ... + 85°C Total working travel 1 mm

Climatic Category (IEC) 55 / 85 / 21 Spring force (initial) 0.25 N

Solderability 235°C, 5s Spring force (at nominal

position)

0.60 N at 0.7 mm stroke

Resistance to soldering

heat

280°C, 10s Coplanarity SMD terminations 0.1 mm

Mechanical life min. 40'000 cycles

2.2 Materials 2.4 Electrical Characteristics

Contact piston Machined brass, plating 0.4 µm Au

over 2.5 µm Ni

Operating voltage 100 VRMS / 150 VDC

Contact termination Machined brass, plating 0.4 µm Au

over 2.5 µm Ni

Operating current (per

terminal)

max. 2 A continuous

max. 3 A peak

Spring Music wire, plating Flash Au Contact resistance max. 20 mΩ

Insulation resistance 10'000 MΩ (after climatic tests)Insulator Glass fibre reinforced high

temperature polyester PCT, self-

extinguishing UL94V-0, colour black Dielectric strength 500 VRMS

Air and creepage distances min. 0.7 mm

Capacitance max. 1 pF

Product Information IP0000.03.R1

Rev.1 –15/05/01- Page 2/2

Preci-Dip Durtal SA

CH-2800 Delémont / Switzerland

phone +41 (32) 421 04 00 - fax +41 (32) 421 04 01

mail:sales@precidip.com – www.precidip.com

143

3. Ordering Information

3.1 Dimensions, Order Number Code and Packaging Information

PN 8PM-SS-0006-01-913

Contact plating code: only available in the above given combination as standard

Packaging: Tape & Reel: Tape width 24 mm

Pitch on tape 12 mm

Reel diameter 330 mm

Number of pcs per reel 1300

Number of pcs per box 3900

3.2 Availability

Now