Metal Glaze Fixed Resistors Type RGP Series Key Features I The thick film is suitable for the manufacture of very high resistance values and for high voltage working components. I The combination of high values and high working voltage makes these components ideally suited for such applications as TVs, electrical measuring equipment etc.. I Thick film metal glaze series for high ohmic values and high voltage surge rating with a range up to 10 Gohm. Metal glaze resistors are manufactured using thick film techniques. The ceramic slugs have the thick film applied, the film is fired and end caps are forced onto the slugs, the resistive element is spiralled to value and lead wires are welded onto the end caps. Four layers of coating are applied - the first being a phenolic resin, the other three being epoxy. Characteristics - Electrical RGP0207CH RGP50 RGP100 RGP200 RGP300 Rated Power @ 70C (W): 0.25 0.5 1 2 3 4 Resistance Range (ohms) Min: 1M0 1M0 1M0 1M0 1M0 1M0 Max: 1G0 3G0 5G0 5G0 10G 10G Tolerance (%): 5 10 Code Letter: J K Temp. Coefficient Max (ppm/C): 350 Selection Series: RGP400 E24 Limiting Element Voltage (V): 750 1K0 1K5 5K0 10K 15K Maximum Overload Voltage (V): 1K0 1K5 2K5 7K5 15K 20K Operating Temp. Range (C): -55 to +155 Climatic Category: 55/155/56 Voltage Coefficient (%/V): 0.005 Typical Noise at 47Mohm: 0.75 Dielectric Strength (V): 300 Insulation Resistance (Mohms): 1000 Dimensions 1773267 CIS BI 06/2011 Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Style L1 D 0.5 d 0.1 RGP0207CH 6.5 2.5 0.6 28 RGP50 13.0 4.5 0.8 38 RGP100 14.5 5.5 0.8 38 RGP200 27.0 7.0 0.8 38 RGP300 42.0 7.0 0.8 38 RGP400 52.0 8.0 1.0 38 Dimensions are shown for reference purposes only. Specifications subject to change. l2 For email, phone or live chat, go to: te.com/help Metal Glaze Fixed Resistors Type RGP Series Derating Curve Percent Rated Power 100 80 60 40 20 0 40 60 70 80 100 120 140 160 Ambient Temperature (C) Mounting The resistors are suitable for processing on automatic insertion equipment and cutting and bending machines. Marking RGP0207CH are marked with a four band colour code in accordance with IEC 62. All others are marked alpha-numerically with the type, value and tolerance. Packaging RGP0207CH resistors are normally supplied taped in 'ammo' boxes of 2000 pieces for the range 1M1 to 100M and in boxes of 1000 for the range 101M to 1G0. All other case sizes are packed loose in polythene bags in quantities of 50 pieces per bag. Please consult the Sales Office for tape/boxed product up to 2 watt case size. Special Requirements Other values and power ratings are available. Contact the Sales Office for special requirements. Performance Characteristics The evaluation of the performance characteristics is carried out with reference to IEC Specifications QC 400 000 and QC 400 100. TEST REF Long Term Tests (2% + 0.05 ohm) 4.23 Climatic sequence 4.24 Damp heat, steady state 4.25.1 Endurance at 70C 4.25.3 Endurance at 155C TEST REF Short Term Tests (1% + 0.05 ohm) 4.13 Overload 4.16 Robustness of terminations 4.18 Resistance to soldering heat 4.19 Rapid change of temperature 4.22 Vibration How to Order RGP Common Part 0207CH J 100R Style Tolerance Value 0207CH - 0.25W RGP - Metal Glaze Fixed Resistor 50 - 0.5W 100 - 1W 200 - 2W 300 - 3W J - 5% 100 ohm (100 ohms) 100R 1K0 (1000 ohms) 1K0 100K ohm (100,000 ohms) 100K 400 - 4W TE Connectivity, TE connectivity (logo) and TE (logo) are trademarks. Other logos, product and Company names mentioned herein may be trademarks of their respective owners. While TE has made every reasonable effort to ensure the accuracy of the information in this datasheet, TE does not guarantee that it is error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose. The dimensions in this datasheet are for reference purposes only and are subject to change without notice. Specifications are subject to change without notice. Consult TE for the latest dimensions and design specifications.