Click on Series name for product info on aimtec.com Series AM1LS-(J)NZ 1 Watt | DC-DC Converter FEATURES: * * * * * * * * SMD Package Single Output Models Low Ripple and Noise Industry Standard Pinout Input / Output Isolation 1500 & 3000 VDC Operating Temperature -40oC to +105oC RoHS Compliant Continuous Short Circuit Protection Models Single output Input Voltage (V) Output Voltage (V) Output Current Max / Min (mA) Isolation (VDC) AM1LS-0303S-NZ AM1LS-0305S-NZ AM1LS-0309S-NZ AM1LS-0312S-NZ AM1LS-0315S-NZ AM1LS-0324S-NZ AM1LS-0503S-NZ** AM1LS-0505S-NZ** AM1LS-0505SJZ** AM1LS-0506S-NZ AM1LS-0509S-NZ** AM1LS-0512S-NZ** AM1LS-0515S-NZ** AM1LS-0524S-NZ** AM1LS-1203S-NZ AM1LS-1205S-NZ AM1LS-1209S-NZ AM1LS-1212S-NZ AM1LS-1215S-NZ AM1LS-1224S-NZ AM1LS-1505S-NZ AM1LS-1509S-NZ AM1LS-1515S-NZ AM1LS-2403S-NZ AM1LS-2405S-NZ AM1LS-2409S-NZ AM1LS-2412S-NZ AM1LS-2415S-NZ AM1LS-2424S-NZ 2.97-3.63 2.97-3.63 2.97-3.63 2.97-3.63 2.97-3.63 2.97-3.63 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 10.8-13.2 10.8-13.2 10.8-13.2 10.8-13.2 10.8-13.2 10.8-13.2 13.5-16.5 13.5-16.5 13.5-16.5 21.6-26.4 21.6-26.4 21.6-26.4 21.6-26.4 21.6-26.4 21.6-26.4 3.3 5 9 12 15 24 3.3 5 5 6 9 12 15 24 3.3 5 9 12 15 24 5 9 15 3.3 5 9 12 15 24 303 / 30 200 / 20 111 / 12 84 / 9 67 / 7 42 / 4 303 / 30 200 / 20 200 / 20 167 / 17 111 / 12 84 / 9 67 / 7 42 / 4 303 / 30 200 / 20 111 / 12 84 / 9 67 / 7 42 / 4 200 / 20 111 / 12 67 / 7 303 / 30 200 / 20 111 / 12 84 / 9 67 / 7 42 / 4 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 415 404 404 404 404 404 286 286 286 250 254 254 254 254 111 104 104 103 103 103 82 82 82 52 52 52 52 51 51 AM1LS-0303SH30-NZ AM1LS-0305SH30-NZ AM1LS-0503SH30-NZ** AM1LS-0505SH30-NZ** AM1LS-0509SH30-NZ** AM1LS-0512SH30-NZ** AM1LS-0515SH30-NZ** AM1LS-0524SH30-NZ** AM1LS-1203SH30-NZ AM1LS-1205SH30-NZ AM1LS-1209SH30-NZ AM1LS-1212SH30-NZ AM1LS-1215SH30-NZ AM1LS-1224SH30-NZ AM1LS-1515SH30-NZ AM1LS-2405SH30-NZ 2.97-3.63 2.97-3.63 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 10.8-13.2 10.8-13.2 10.8-13.2 10.8-13.2 10.8-13.2 10.8-13.2 13.5-16.5 21.6-26.4 3.3 5 3.3 5 9 12 15 24 3.3 5 9 12 15 24 15 5 303 / 30 200 / 20 303 / 30 200 / 20 111 / 12 84 / 9 67 / 7 42 / 4 303 / 30 200 / 20 111 / 12 84 / 9 67 / 7 42 / 4 67 / 7 200 / 20 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 415 388 286 286 254 254 254 254 111 104 104 103 103 103 82 52 Model www.aimtec.com F 051e R12.M Tel: +1 514 620 2722 1 of 8 Input Current Max | No Load (mA) Max Capacitive Load (F) Efficiency (%) 25 25 25 25 25 25 10 10 10 20 20 20 30 30 15 15 15 15 15 15 10 10 10 7 7 7 7 7 7 220 220 220 220 220 220 2400 2400 2400 220 1000 560 560 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 69 74 80 80 80 80 74 82 82 80 80 80 80 80 75 80 80 81 81 81 80 80 81 71 80 80 80 81 81 25 25 10 10 20 20 30 30 15 15 15 15 15 15 10 7 220 220 2400 2400 1000 560 560 220 220 220 220 220 220 220 220 220 73 78 74 82 83 83 83 85 75 80 80 81 81 81 80 80 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM1LS-(J)NZ 1 Watt | DC-DC Converter AM1LS-2409SH30-NZ AM1LS-2415SH30-NZ AM1LS-2424SH30-NZ 21.6-26.4 21.6-26.4 21.6-26.4 9 15 24 111 / 12 84 / 9 67 / 7 3000 3000 3000 52 51 51 Input Voltage (V) Output Voltage (V) Output Current Max / Min (mA) Isolation (VDC) AM1LS-0305D-NZ AM1LS-0312D-NZ AM1LS-0315D-NZ AM1LS-0505D-NZ** AM1LS-0509D-NZ** AM1LS-0512D-NZ** AM1LS-0515D-NZ** AM1LS-0524D-NZ AM1LS-1205D-NZ AM1LS-1209D-NZ AM1LS-1212D-NZ AM1LS-1215D-NZ AM1LS-1224D-NZ AM1LS-1515D-NZ AM1LS-2405D-NZ AM1LS-2409D-NZ AM1LS-2412D-NZ AM1LS-2415D-NZ AM1LS-2424D-NZ 2.97-3.63 2.97-3.63 2.97-3.63 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 10.8-13.2 10.8-13.2 10.8-13.2 10.8-13.2 10.8-13.2 13.5-16.5 21.6-26.4 21.6-26.4 21.6-26.4 21.6-26.4 21.6-26.4 5 12 15 5 9 12 15 24 5 9 12 15 24 15 5 9 12 15 24 100 / 10 42 / 5 33 / 3 100 / 10 56 / 6 42 / 5 33 / 3 21 / 2 100 / 10 56 / 6 42 / 5 33 / 3 21 / 2 33 / 3 100 / 10 56 / 6 42 / 5 33 / 3 21 / 2 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 415 388 263 257 254 254 254 250 111 104 104 103 103 103 83 52 52 51 51 AM1LS-0305DH30-NZ AM1LS-0312DH30-NZ AM1LS-0505DH30-NZ** AM1LS-0509DH30-NZ** AM1LS-0512DH30-NZ** AM1LS-0515DH30-NZ** AM1LS-0524DH30-NZ AM1LS-1205DH30-NZ AM1LS-1209DH30-NZ AM1LS-1212DH30-NZ AM1LS-1215DH30-NZ AM1LS-1224DH30-NZ AM1LS-1515DH30-NZ AM1LS-2405DH30-NZ AM1LS-2409DH30-NZ AM1LS-2412DH30-NZ AM1LS-2415DH30-NZ AM1LS-2424DH30-NZ 2.97-3.63 2.97-3.63 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 10.8-13.2 10.8-13.2 10.8-13.2 10.8-13.2 10.8-13.2 13.5-16.5 21.6-26.4 21.6-26.4 21.6-26.4 21.6-26.4 21.6-26.4 5 12 5 9 12 15 24 5 9 12 15 24 15 5 9 12 15 24 100 / 10 42 / 5 100 / 10 56 / 6 42 / 5 33 / 3 21 / 2 100 / 10 56 / 6 42 / 5 33 / 3 21 / 2 33 / 3 100 / 10 56 / 6 42 / 5 33 / 3 21 / 2 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 389 389 257 254 254 254 250 111 104 104 103 103 83 82 52 52 51 51 7 7 7 220 220 220 80 81 81 Models Dual output Model Input Current Max | No Load (mA) Max Capacitive Load(F) Efficiency (%) 25 25 20 10 20 20 30 20 15 15 15 15 15 15 12 7 7 7 7 100 100 100 1200 470 220 220 100 100 100 100 100 100 100 100 100 100 100 100 78 80 80 82 83 83 83 81 75 80 80 81 81 81 82 82 82 82 82 25 25 10 20 20 30 20 15 15 15 15 15 12 10 7 7 7 7 100 100 1200 470 220 220 100 100 100 100 100 100 100 100 100 100 100 100 76 77 82 83 83 83 81 80 80 81 81 81 81 82 82 82 82 82 With Momentary short circuit protection of 1 second NOTE 1: Add suffix "TR" to a part number when ordering in tape and reel package NOTE: All specifications in this datasheet are measured at an ambient temperature of 25C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. Input Specifications Parameters Voltage Range www.aimtec.com F 051e R12.M Nominal Typical 3 5 12 15 24 2.97-3.63 4.5-5.5 10.8-13.2 13.5-16.5 21.6-26.4 Tel: +1 514 620 2722 2 of 8 Maximum Units VDC Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM1LS-(J)NZ 1 Watt | DC-DC Converter Absolute Max Input Voltage (1 sec max) 3 Vin 5 Vin 12 Vin 15 Vin 24 Vin 5 9 18 21 30 Filter AM1LS-0505S-JZ input no load current Capacitor 5 VDC 10 mA Isolation Specifications Parameters Tested I/O Voltage Resistance Capacitance Conditions Typical Maximum Units 1500 models 3000 Models >1000 20 60 sec 500VDC VDC MOhm pF Output Specifications Parameters Voltage Accuracy Short Circuit Protection Short Circuit Restart Line Voltage Regulation Load Voltage Regulation (10% - 100% Load) Load Voltage Regulation For Part numbers with** (10% - 100% Load) Temperature Coefficient Temperature Coefficient For Part numbers with** Ripple & Noise Ripple & Noise For Part numbers with** Conditions Typical Maximum 100% load (see tolerance chart) 2.5 Continuous, unless marked with Auto-Recovery For 1% of Vin 1.2 3.3V models only 1.5 3.3V 18 5V 12 6V 10 9V 8 12 V 7 15 V 6 24 V 5 Units % % of Vin % 3.3V 5V 9V 12 V 15 V 24 V 15 10 8 7 6 5 % 100% load 0.03 0.02 %/oC %/oC 100% load 60 30 50 24V output models mV p-p 75 100 mV p-p General Specifications Parameters Switching frequency Switching frequency (for part number with**) Operating temperature Storage temperature Cooling Storage Humidity Case material Weight Weight For Part numbers with** Dimensions (L x W x H) www.aimtec.com F 051e R12.M Conditions Typical Maximum Units 100% load 100% load 100 270 300 KHz KHz With derating above +100 oC -40 to +105 oC -55 to +125 Free air convection Non Condensing 95 Epoxy resin (UL94-V0) Single 1.5 Dual 1.8 1.4 % RH g g Single Output 0.50 x 0.44 x 0.28inches 12.70 x 11.20 x 7.25mm Dual Output 0.60 x 0.44 x 0.28 inches 15.24 x 11.20 x 7.25 mm Tel: +1 514 620 2722 3 of 8 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM1LS-(J)NZ 1 Watt | DC-DC Converter Dimensions (L x W x H) For Part numbers with** MTBF Maximum soldering temperature Maximum case temperature Single Output 0.52 x 0.44 x 0.28inches 13.20*11.40*7.25 mm Dual Output 0.60 x 0.44 x 0.28 inches 15.24 x 11.40 x 7.25 mm >3500Khrs (MIL-HDBK -217F, Ground Benign, t=+25oC)hours 1.5mm from case for 10 sec 300 130 oC oC Safety Specifications Parameters Agency approvals Standards Standards for part numbers with suffix JZ UL 60950-1 EMI - Conducted and radiated emission Electrostatic Discharge Immunity EMI - Conducted and radiated emission Electrostatic Discharge Immunity cULus (without 15V input and without 3.3V input of dual output models) (Not applicable for all models with suffix JZ) EN55022, class B IEC 61000-4-2, Contact +/-8kV, Criteria B EN55032, class B IEC 61000-4-2, Contact +/-4kV, Criteria B Pin Out Specifications and Dimensions Front View Pin 1 2 3 4 5 6 7 8 Single - V Input + V Input No Pin -V Output +V Output No Pin No Pin N.C. 8.3 (0.32) Side View 5.00 (0.19) 0~10 angle 2.0 (0.08) 0.25 (0.01) 1.45 (0.06) Top View 0.88 (0.04) 12.70 (0.50) 7.62 (0.30) 11.20 8.30 (0.44) (0.32) 1 2.54 (0.10) 0.60 (0.02) For Single output part numbers with** Front View 8.50 (0.33) Side View 5.00 (0.19) Pin 1 2 3 4 5 6 7 8 Single - V Input + V Input No Pin -V Output +V Output No Pin No Pin N.C. 0~5 angle 2.0 (0.08) 0.25 (0.01) 1.45 (0.06) Top View 0.95 (0.04) 13.20 (0.52) 7.62 (0.30) 11.40 8.50 (0.44) (0.33) 1 2.54 (0.10) www.aimtec.com F 051e R12.M Tel: +1 514 620 2722 4 of 8 0.60 (0.02) Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM1LS-(J)NZ 1 Watt | DC-DC Converter Dual Output Models Pin Dual Output Models 1 2 3 4 5 6 7 8 9 10 -V Input +V Input No Pin Common -V Output No Pin +V Output No Pin No Pin N.C. Front View 8.15 (0.32) Side View 5.90 (0.23) 7.60 (0.30) 1.70 (0.07) 0.25 (0.01) 0~10 angle 1.50 (0.06) Top View 15.24 (0.60) 7.62 (0.30) 11.20 8.30 (0.44) (0.33) 1 0.60 (0.03) 2.54 (0.10) Dual Output Models with ** Front View 8.15 (0.32) Side View 5.90 (0.23) 7.60 (0.30) 1.70 (0.07) 0.25 (0.01) 0~5 angle 0.95 (0.03) Top View 15.24 (0.60) 7.62 (0.30) 11.40 8.30 (0.44) (0.33) 1 2.54 (0.10) www.aimtec.com F 051e R12.M 0.60 (0.03) Tel: +1 514 620 2722 5 of 8 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM1LS-(J)NZ 1 Watt | DC-DC Converter Load Accuracy Tolerance Graph Derating Free Air Convection 10 % +2.5 % 100 -2.5 % 80 Output Voltage Accuracy% Rated Output Voltage 100C line -7.5 % 70 % 50 % 10 % 100 % Output Power % Typic al loa d 5% 60 Safe Operating Area 40 20 105C 0 Output Current % (Nominal Input) -40 0 -20 40 80 100 120 140 Ambient Temperature C Recommended Circuits Capacitor selection Table Vin C1 Single VDC 3.3 Single Vin+ C2 Dual VDC C2/C3 Vo+ C2 4.7 F 3.3 V 10 F 3.3 4.7 F 4.7 F 5V 10F 5V 4.7 F 4.7 F 4.7 F 4.7 F 4.7 F 2.2F 2.2F 1F 9V 12 15 24 12 V 15 V 24V 4.7 F 2.2 1 0.47 2.2F 1F 0.47 F 9V 12 V 15 V 2.2 F 1 1 12 V 15 V 24 V 1 F 0.47 F 0.47 F C1 Vin- 5 12 15 24 1) Ensure output load of Min 10%, or specifications may not be met 2) Under normal operation, there is no protection for overload condition 3) Converter may exhibit start up delay if capacitive load exceeds recommended 4) Ceramic or electrolytic type capacitors are recommended, tantalum type may damage converter 5) Parallel connections, or hot swapping is not recommended www.aimtec.com F 051e R12.M Vo- Dual Vin+ Vo+ C2 Com C1 C3 Vin- Tel: +1 514 620 2722 6 of 8 Vo- Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM1LS-(J)NZ 1 Watt | DC-DC Converter EMI Recommended Circuit (Class B) Input Reflected Ripple Current Test Circuit (for part numbers with suffix NZ) LDM (6.8 h) Vin- Vin+ Vo+ + C1 (4.7 f / 50V) Vin+ Aimtec DC-DC Converter L1 (4.7 h) Test Point Vo+ + RL (Full Load) C1 (220 f) Vin- Vo- - - Aimtec DC-DC Converter RL (Full Load) Vo- * Tested at full load, and nominal input Typical Efficiency vs. Loading AM1LS-0305S-NZ Efficiency vs. Loading 100 Eff % 80 60 40 20 0 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% Loading % www.aimtec.com F 051e R12.M Tel: +1 514 620 2722 7 of 8 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM1LS-(J)NZ 1 Watt | DC-DC Converter AM1LS-0505S-NZ Efficiency vs. Loading 100 Eff % 80 60 40 20 0 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% Loading % AM1LS-1209S-NZ Efficiency vs. Loading 100 Eff % 80 60 40 20 0 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% Loading % NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the date manufactured. 3. Mechanical drawings and specifications are for reference only. 4. All specifications are measured at an ambient temperature of 25C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. 5. Aimtec may not have conducted destructive testing or chemical analysis on all internal components and chemicals at the time of publishing this document. CAS numbers and other limited information are considered proprietary and may not be available for release. 6. This product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control systems or other such applications which necessitate specific safety and regulatory standards other the ones listed in this datasheet. 7. Warranty is in accordance with Aimtec's standard Terms of Sale available at www.aimtec.com. www.aimtec.com F 051e R12.M Tel: +1 514 620 2722 8 of 8 Toll free: + 1 888 9 AIMTEC (924 6832) North America only