Vishay Thin Film Single High Value Chip Resistors SURFACE MOUNT H FEATURES * Ohmic values to hundred megohms * Low Noise * Tight Tolerance TYPICAL PERFORMANCE Actual Size These high value resistors are manufactured using thin film technology and are available with improved performance and size when compared to thick film counterparts. They can be wire bonded or solder attached. SCHEMATIC AND PATTERN ABS TCR 50 TOL 0.1 POWER RATING CASE SIZE R POWER @ + 70C (DERATED (TO 0 @ + 155C) H 0705 200mW H 1206 250mW H 2010 500mW STANDARD ELECTRICAL SPECIFICATIONS TEST MATERIAL Absolute TCR: SPECIFICATIONS PASSIVATED CHROMIUM SILICON 50ppm/C Absolute Tolerance: 0.1 % to 10% Power Rating See table above Stability: R < 0.2 % Voltage Coefficient Working Voltage Storage Temperature Range - 55C to + 155C Shelf Life Stability 1000 hrs. @ + 70C 100 Volts - 55C to + 155C Thermal EMF - 55C to + 125C < 0.1ppm/Volt Operating Temperature Range Noise CONDITIONS < - 35dB Typical < 0.01V/C 200ppm 1 Year VISHAY THIN FILM * FRANCE +33.4.93.37.28.24 FAX: +33.4.93.37.27.31 * GERMANY +49.9287.710 FAX: +49 9287.70435 * ISRAEL +972.3.557.0945 FAX: +972.3.558.9121 * ITALY + 39.2.300.11919 FAX: +39.2.300.11999 * JAPAN +81.42.729.0661 FAX: +81.42.729.3400 * SINGAPORE +65.788.6668 FAX: +65.788.0988 * SWEDEN +46.8.594.70590 FAX: +46.8.594.70581 * UK +44 191 514 8237 FAX: +44 1953 457 722 * USA: (610) 407-4800 FAX: (610) 640-9081 Document Number: 60032 Revision 21-May-01 www.vishay.com 67 SURFACE MOUNT CHIPS * High Stability H Single High Value Chip Resistors Vishay Thin Film HIGH VALUE WRAPAROUND SURFACE MOUNT SURFACE MOUNT CHIPS SERIES H0603 H 0705 H 1206 H 2010 Standard Configuration and Sizes R (1.91 x 1.27)mm2 (3.2 x 1.6)mm2 (5.08 x 2.54)mm2 Max. Ohmic Value 2.5M 5M 15M 50M Power Rating at + 25C 0.1W 0.2W 0.33W 1W DIMENSIONS in inches (millimeters) A D D C E E B SIZE A B C D/ E CASE max. tol. max. tol. max. tol. max. tol. SIZE + 0.64 (0.025) + 0.26 (0.010) + 0.64 (0.024) + 0.13 (0.005) min. tol. min. tol. min. tol. min. tol. - 0.13 (- 0.005) - 0.13 (- 0.005) - 0.13 (- 0.005) - 0.13 (- 0.005) 0705 0805 1.91 (0.075) 1.27 (0.050) 0.38 (0.015) 0.38 (0.015) 1206 3.20 (0.126) 1.60 (0.036) 0.38 (0.015) 0.38 (0.015) 2010 5.08 (0.200) 2.54 (0.100) 0.38 (0.015) 0.38 (0.015) 0603 1.52 (0.086) 0.75 (0.063) 0.38 (0.015) 0.38 (0.015) HIGH VALUE WRAPAROUND Resistive Element Chromium Silicon Substrate Material Alumina Plating Tin Lead over Nickel Terminals Tin lead over nickel or gold over nickel How to Order Type Size T.C.R. Ohmic Value Tolerance Termination P 0705 H 1004 F B 0603 0705 0805 1206 2010 H: 50 ppm/C K: 100 ppm/C Special orders on request. The first three digits are significant figures and the last digit specifies the number of zero to follow. e.g. 1004 = 1M ohm. B: 0.1% D: 0.5% F: 1.0% G: 2.0% J: 5.0% K: 10% B : Tinned over nickel barrier G : Gold over nickel barrier VISHAY THIN FILM * FRANCE +33.4.93.37.28.24 FAX: +33.4.93.37.27.31 * GERMANY +49.9287.710 FAX: +49 9287.70435 * ISRAEL +972.3.557.0945 FAX: +972.3.558.9121 * ITALY + 39.2.300.11919 FAX: +39.2.300.11999 * JAPAN +81.42.729.0661 FAX: +81.42.729.3400 * SINGAPORE +65.788.6668 FAX: +65.788.0988 * SWEDEN +46.8.594.70590 FAX: +46.8.594.70581 * UK +44 191 514 8237 FAX: +44 1953 457 722 * USA: (610) 407-4800 FAX: (610) 640-9081 www.vishay.com 68 Document Number: 60032 Revision 21-May-01 Legal Disclaimer Notice Vishay Notice Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc., or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Vishay for any damages resulting from such improper use or sale. Document Number: 91000 Revision: 08-Apr-05 www.vishay.com 1