0,3 A 12,5 1 0,2 2 3 10,8 Nietmutter / M3 oder/ or press-fit bolt / threaded sleeve : riveted nut : l=3.7/5.6/6.0/6.3 #4-40 Einpressbolzen / Gewindehulse M3 oder/ or A Einpressbolzen press-fit bolt : #4-40 27,5 0,3 cross section A-A Schnitt A-A / M3 oder/ or 0,3 #4-40 39,1 3,2 6,3 13,72 5,8 min. 4,5 3,2 min. 3 +0,3 l (min. 2.5) 6,3 6,4 6,3 (5.9) M3 124642 Gehause genietet +0,13 3,2 clamping thread : standoff : riveted housing : 3,05 Abstandshulse / Nietmutter mit Klemmteil 124642 124643 3,9 max 1,5 A3 A2 33,3 Polzahl / Terminal Length : Aufdruck / Zubehor / Logo : 201=0.8m (30 in) Au CONTACT, GOLD/LEAD TERMINAL ERNI Refer to table on page 2 Special : Refer to table on page 2 metal plating of plated-through hole fur Einpresskontakt Zeichnung 114110 / for press-fit contact drawing 114110 fur Einpressbolzen Zeichnung 114109 / for press-fit bolt drawing 114109 Information: Class : Accessory : Sonderausfuhrung / - 3WK3 Anforderungsstufe / Board hole pattern 144058 Schichtaufbau im metallisierten Loch / Pressfit Terminal Type : Type : Leiterplattenbohrbild 144058 / Refer to table on page 2 No. of contacts : Anschlulange / Bauart / 0,2 Refer to table on page 2 Part No. : Anschluart / +0,2 Tolerances 2:1 Scale All Dimensions in mm Consider protection memo from DIN 34 Ident-Nr. / A1 25,1 8,3 +0,2 6,3 All rights reserved. Only for information. To insure that this is the latest version of this drawing, please contact one of the ERNI companies before using. Subject to modification without prior notice. Drawing will not be updated. Date TMC-P 3WK3-EP36-6,3-3 TMC-P 3WK3-EP36-6,3-3 www.ERNI.com Index Designation M:00022981.SZN 054992 TMCP I Ordering Information D-Sub Connector High Power Pressfit Vertical Male Assembly Height 6.3mm Number of Pins 3WK3 Accessory Termination Side: Pressfit bolt M3 134438 Accessory Termination Side: Pressfit bolt #4-40 134439 Accessory Mating Side: Threaded sleeve M3 Accessory Termination Side: Pressfit bolt 134500 Accessory Mating Side: Threaded sleeve #4-40 134501 Ordering Information press-in tools Number of Pins 3WK3 Upper Tool with Quick Change Device Lower Tool 220504 220147 www.erni.com Accessory Termination Side: Pressfit bolt