SPEC NO: DSAG3026 REV NO: V.8A DATE: APR/07/2013 PAGE: 1 OF 5
APPROVED: WYNEC CHECKED: Joe Lee DRAWN: F.Cui ERP: 1352000320
SURFACE MOUNT DISPLAY
Part Number: KCDA04-106
Super Bright Orange
Features
z0.4 inch digit height.
zLow current operation.
zExcellent character appearance.
zMechanically rugged.
zGray face,white segment.
zPackage: 250pcs/ reel.
zMoisture sensitivity level : level 2a.
zRoHS compliant.
Description
The Super Bright Orange device is made with AlGaInP (on
GaAs substrate) light emitting diode chip.
Package Dimensions& Intern al Circuit Diagram
Notes:
1. All dimensions are in millimeters (inches), Tolerance is ±0.25(0.01")unless otherwise noted.
2. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.
3.The gap between the reflector and PCB shall not exceed 0.25mm.
SEK
SPEC NO: DSAG3026 REV NO: V.8A DATE: APR/07/2013 PAGE: 2 OF 5
APPROVED: WYNEC CHECKED: Joe Lee DRAWN: F.Cui ERP: 1352000320
Selection Guide
Absolute Maximum Ratings at TA=25°C
Electrical / Optical Characteristics at TA=25°C
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
Part No. Dice Lens Type
Iv (ucd) [1]
@ 10mA Description
Min. Typ.
Super Bright Orange (AlGaInP) White Diffused
21000 60000
Common Anode, Rt.
Hand Decimal.
*9000 *15000
KCDA04-106
Symbol Parameter Device Typ. Max. Units Test Conditions
λpeak Peak Wavelength Super Bright Orange 610 nm IF=20mA
λD [1] Dominant Wavelength Super Bright Orange 601 nm IF=20mA
Δλ1/2 Spectral Line Half-width Super Bright Orange 29 nm IF=20mA
C Capacitance Super Bright Orange 15 pF VF=0V;f=1MHz
VF [2] Forward Voltage Super Bright Orange 2.1 2.5 V IF=20mA
IR Reverse Current Super Bright Orange 10 uA VR=5V
Parameter Super Bright Orange Units
Power dissipation 75 mW
DC Forward Current 30 mA
Peak Forward Current [1] 195 mA
Reverse Voltage 5 V
Operating / Storage Temperature -40°C To +85°C
Note:
1. Luminous intensity/ luminous Flux: +/-15%.
*Luminous intensity value is traceable to the CIE127-2007 compliant national standards.
Notes:
1.Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
3. Wavelength value is traceable to the CIE127-2007 compliant national standards.
SPEC NO: DSAG3026 REV NO: V.8A DATE: APR/07/2013 PAGE: 3 OF 5
APPROVED: WYNEC CHECKED: Joe Lee DRAWN: F.Cui ERP: 1352000320
Super Bright Orange KCDA04-106
SPEC NO: DSAG3026 REV NO: V.8A DATE: APR/07/2013 PAGE: 4 OF 5
APPROVED: WYNEC CHECKED: Joe Lee DRAWN: F.Cui ERP: 1352000320
KCDA04-106
Recommended Soldering Pattern
(Units : mm; Tolerance: ± 0.15)
Reel Dimension
Tape Specifications
(Units : mm)
SPEC NO: DSAG3026 REV NO: V.8A DATE: APR/07/2013 PAGE: 5 OF 5
APPROVED: WYNEC CHECKED: Joe Lee DRAWN: F.Cui ERP: 1352000320
PACKING & LABEL SPECIFICATIONS KCDA04-106
Detailed application notes are listed on our website.
http://www.kingbright.com/application_notes
