2 INDEX Metal Film Res. [ MFR Series ] 4 Metal Film Res.-Precision Type [ MFP Series ] 6 Metal Film Res.-Professional Type [ MF0 Series ] 8 Metal Film Res.-Flame-Proof Type [ FMF Series ] 10 Metal Film Res.-Professional & Flame-Proof Type [ FM0 Series ] 12 Metal Film Res.-Power Flame-Proof Type [ FMP Series ] 14 Metal Oxide Film Res.-Flame-Proof Type [ RSF Series ] 16 Carbon Film Res. [ CFR Series ] 18 Carbon Film Res.-Professional Type [ CF0 Series ] 20 Carbon Film Res.-Flame-Proof Type [ FCR Series ] 22 Carbon Film Res.-Professional & Flame-Proof Type [ FC0 Series ] 24 Carbon Film Res.-Non Inductive Type-Normal Style [ NCR Series ] 26 Carbon Film Res.-Non-Inductive Type-Miniature Style [ NCR Series ] 28 Zerohm Res. [ ZOR Series ] 29 Jumper Wires [JPW Series ] 30 Wirewound Res. [ KNP Series ] 32 Wirewound Res.-Non Inductive Type [ NKN Series ] 34 Metal film Res.-Fusible Type-Normal Style [ FRM Series ] 36 Metal film Res.-Fusible Type-Miniature Style [ FRM Series ] 38 Cement Res.-Axial Lead Type [ SQP/NSP Series ] 40 Cement Res.-Vertical Lead Type [ SQM/NSM Series ] 42 Cement Res.-Radial Terminals Type [ SQZ/NSZ Series ] Cement Res.-Clamp Mounting Type [ SQH/NSH Series ] Packing Methods 50 Special Type [ Forming Type ] 51 Explanations of Ordering Code YAGEO CORPORATION LEADED RESISTORS ISO-9002 CERTIFIED 44 50 YAGEO CORPORATION LEADED RESISTORS MFR Series Metal Film Resistors Normal & Miniature Style FEATURES Power Rating 1/6W, 1/4W, 1/2W, 1W, 2W Resistance Tolerance r 0.1%, r 0.25%, r 0.5%, r 1% T.C.R. r 15ppm/C, r 25ppm/C, r 50ppm/C, r 100ppm/C DERATING CURVE Rated Load (%) 70C 100 INTRODUCTION 80 The MFR Series Metal Film Resistors are 60 manufactured using vacuum sputtering system 40 to deposit multiple layers of mixed metals and 20 passivative materials onto a carefully treated high grade ceramic substrate, the resistors are 20 40 60 80 100 120 140 160 180 Ambient Temperature (C) coated with layers of blue lacquer. HOT-SPOT TEMPERATURE Surface Temp. Rise (C) Measuring Position 200 MFR2WS 150 100 50 0 25 50 75 MFR200 MFR1WS MFR100 MFR50S MFR-50 MFR-25 MFR-12 MFR25S Applied Load, % of RCWV 100 DIMENSIONS Unit : mm STYLE od H L oD DIMENSION Normal Miniature L oD H od MFR-12 MFR25S 3.4r 0.3 1.9r 0.2 28r 2.0 0.5r 0.05 MFR-25 MFR50S 6.3r 0.5 2.4r 0.2 28r 2.0 0.6r 0.05 MFR-50 MFR1WS 9.0r 0.5 3.3r 0.3 26r 2.0 0.6r 0.05 MFR100 MFR2WS 11.5r 1.0 4.5r 0.5 35r 2.0 0.8r 0.05 MFR200 - 15.5r 1.0 5.0r 0.5 33r 2.0 0.8r 0.05 Note : ELECTRICAL CHARACTERISTICS STYLE MFR-12 MFR25S MFR-25 MFR50S MFR-50 Power Rating at 70C 1/6W 1/4W Operating Temp. Range -55C to +155C Maximum Working Voltage 200V 200V 250V 300V 350V 400V 500V 500V 500V Maximum Overload Voltage 400V 400V 500V 600V 700V 800V 1000V 1000V 1000V Dielectric Withstanding Voltage 300V 400V 500V 500V 500V 700V 1000V 1000V 1000V Value Range r 0.5%, r 1% 10:~1M: Value Rang r 0.1%, r 0.25% 100:~100K: Temperature Coefficient (by Type) r 15ppm/C, r 25ppm/C, r 50ppm/C, r 100ppm/C 1/2W MFR1WS MFR100 MFR2WS MFR200 1W 2W * Resistance range for standard resistance, below or over this resistance on request. ENVIRONMENTAL CHARACTERISTICS PERFORMANCE TEST TEST METHOD APPRAISE Short Time Overload JIS-C-5202 5.5 2.5 Times RCW V for 5 Seconds r (0.25%+0.05:) Dielectric Withstanding Voltage JIS-C-5202 5.7 in V-Block for 60 Seconds by Type Temperature Coefficient of Resistance JIS-C-5202 5.2 -55C to +155C by Type Insulation Resistance JIS-C-5202 5.6 in V-Block >10000M: Solderability JIS-C-5202 6.5 235C for 5r 0.5 Seconds 95% Min. Coverage Resistance to Solvent JIS-C-5202 6.9 IPA for 1 Min. with Ultrasonic No Deterioration of Coatings and Markings Terminal Strength Direct load for 10 Sec. in The Direction of The Terminal Leads t2.5kg (24.5N) Pulse Overload JIS-C-5202 5.8 4 Times RCW V 10000 Cycles (1 Sec. on , 25 Sec. off) r (1%+0.05:) Load Life in Humidity JIS-C-5202 7.9 40r 2C, 90~95% RH at RCW V for 1000 Hrs. (1.5 Hrs. on , 0.5 Hrs. off ) r (1.5%+0.05:) Load Life JIS-C-5202 7.10 70C at RCW V for 1000 Hrs. (1.5 Hrs. on , 0.5 Hrs. off) r (1.5%+0.05:) Temperature Cycling JIS-C-5202 7.4 -55C Room Temp. +155C Room Temp. for 5 Cycles r (0.75%+0.05:) Resistance to Soldering Heat JIS-C-5202 6.4 350Cr 10C for 3r 0.5 Seconds r (0.25%+0.05:) * Rated Continuous Working Voltage (RCW V)= Power Rating x Resistance Value YAGEO CORPORATION LEADED RESISTORS Precision Type Metal Film Resistors MFP Series FEATURES Power Rating :1/6W, 1/4W, 0.4W, 1/2W, 0.6W Resistance Tolerance : r 0.1%, r 0.25% T.C.R. : r 15ppm/C, r 25ppm/C High thermal conductivity and specific gravity rods Epoxy coating Blue body color POWER DERATING CURVE For resistors operated in ambient temperatures above 70C , power rating must be derated in accordance with the curve below. Rated Load (%) 70C 100 80 60 40 20 20 40 60 80 100 120 140 160 180 Ambient Temperature (C) DIMENSIONS Unit : mm STYLE od H L Normal Miniature L oD H od MFP-12 MFP25S __ 3.4r 0.3 1.9r 0.2 28r 2.0 0.5r 0.05 3.4r 0.3 1.9r 0.2 28r 2.0 0.5r 0.05 MFP50S __ 6.3r 0.5 2.4r 0.2 28r 2.0 0.6r 0.05 6.3r 0.5 2.4r 0.2 28r 2.0 0.6r 0.05 MFP204 MFP-25 oD DIMENSION MFP207 Note : ELECTRICAL CHARACTERISTICS PERFORMANCE STYLE TEST METHOD MFP-12 MFP25S MFP204 MFP-25 MFP50S MFP207 Power Rating at 70C 1/6W 1/4W 0.4W 1/4W 1/2W 0.6W Maximum Working Voltage 150V 200V 200V 250V 250V 250V Maximum Overload Voltage 300V 400V 400V 500V 600V 600V 300V 300V 500V 500V 500V Dielectric Withstanding Voltage JIS-C-5202 5.7 in V-Block for 60 Seconds 300V Temperature Coefficient JIS-C-5202 5.2 Room Temp. Add 100C r 15ppm/C, r 25ppm/C Short Time Overload JIS-C-5202 5.5 2.5 Times RCWV for 5 Sec. r 0.1%+0.05: Insulation Resistance JIS-C-5202 5.6 in V-Block >10,000M: Pulse Overload 4 Times RCWV 10,000 Cycles JIS-C-5202 5.8 (1 Sec. on , 25 Sec. off ) r 1.0%+0.05: Operating Temp. Range -55C to + 155C Value Rang r 0.1% 100:~100K 100:~200K: Value Range r 0.25% 50:~200K 50:~301K: * Resistance range for standard resistance, below or over this resistance on request. ENVIRONMENTAL CHARACTERISTICS PERFORMANCE TEST TEST METHOD APPRAISE Terminal Strength JIS-C-5202 6.1 Direct load for 10 Sec. in the Direction of the Terminal Leads t2.5kg (24.5N) Resistance to Soldering Heat JIS-C-5202 6.4 350C r 10C for 3 r 0.5 Seconds r 0.20%+0.05: Solderability JIS-C-5202 6.5 235C r 5C for 5 r 0.5 Seconds 95% Min. Coverage Resistance to Solvent JIS-C-5202 6.9 IPA for 1 Min. with Ultrasonic No Deterioration of Coatings and Markings Temperature Cycling JIS-C-5202 7.4 -55C Room Temp. +155C Room Temp. for 5 Cycles r 0.25%+0.05: Humidity JIS-C-5202 7.5 40r 2C, 90~95% RH for 1,000 Hrs. r 0.50%+0.05: Load Life in Humidity JIS-C-5202 7.9 40r 2C, 90~95% RH at RCW V for 1,000 Hrs. (1.5 Hrs. on , 0.5 Hrs. off ) r 1.0%+0.05: Load Life JIS-C-5202 7.10 70C at RCW V for 1,000 Hrs. (1.5 Hrs. on, 0.5 Hrs. off ) * Rated Continuous Working Voltage (RCW V)= Power Rating x Resistance Value r 1.0%+0.05: YAGEO CORPORATION LEADED RESISTORS PROFESSIONAL TYPE Metal Film Resistors Miniature Style [ MF0 Series ] FEATURES DIN 44061, 45921 part 107 CECC 40101-039, 40101-017 MIL 10509F (Char. D & C ) Resistance Tolerance r 1% T.C.R. r 50ppm/C DERATING CURVE INTRODUCTION Rated Load (%) The MF0 Series are manufactured by high 70C 100 vacuum sputtering deposit metal film on high 80 thermal conductivity and specific gravity 60 ROSENTHAL ceramic or same grade rods. 40 The resistors are coated with multilayers of 20 blue color lacquer. 20 40 60 80 100 120 140 160 180 Ambient Temperature (C) HOT-SPOT TEMPERATURE Surface Temp. Rise (C) Measuring Position 200 150 100 50 MF0207 MF0204 0 25 50 75 100 Applied Load, % of RCWV DIMENSIONS Unit : mm od H L oD STYLE L oD H od MF0204 3.4r 0.3 1.9r 0.2 28r 2.0 0.5r 0.05 MF0207 6.3r 0.5 2.4r 0.2 28r 2.0 0.6r 0.05 Note : ELECTRICAL CHARACTERISTICS STYLE MF0204 MF0207 Power Rating at 70C 0.4W 0.6W Operating Temp. Range -55C to +155C Maximum Working Voltage 200V 300V Maximum Overload Voltage 400V 600V Dielectric Withstanding Voltage 300V 500V Value Range r 1% 10:~1M: Temperature Coefficient r 50ppm/C * Standard resistance is 10:~1M:, below or over this resistance on request. ENVIRONMENTAL CHARACTERISTICS PERFORMANCE TEST TEST METHOD APPRAISE Short Time Overload JIS-C-5202 5.5 2.5 Times RCW V for 5 Seconds r (0.25%+0.05:) Dielectric Withstanding Voltage JIS-C-5202 5.7 in V-Block for 60 Seconds by Type Temperature Coefficient of Resistance JIS-C-5202 5.2 -55C to +155C r 50ppm/C Insulation Resistance JIS-C-5202 5.6 in V-Block >10000M: Solderability JIS-C-5202 6.5 235C for 5r 0.5 Seconds 95% Min. Coverage Resistance to Solvent JIS-C-5202 6.9 IPA for 1 Min. with Ultrasonic No Deterioration of Coatings and Markings Terminal Strength Direct Load for 10 Sec. in The Direction of The Terminal Leads t2.5kg (24.5N) Pulse Overload JIS-C-5202 5.8 4 Times RCW V 10000 Cycles (1 Sec. on , 25 Sec. off) r (1%+0.05:) Load Life in Humidity JIS-C-5202 7.9 40r 2C, 90~95% RH at RCW V for 1000 Hrs. (1.5 Hrs. on , 0.5 Hrs. off ) r (1.5%+0.05:) Load Life JIS-C-5202 7.10 70C at RCW V for 1000 Hrs. (1.5 Hrs. on , 0.5 Hrs. off) r (1.5%+0.05:) Temperature Cycling JIS-C-5202 7.4 -55C Room Temp. +155C Room Temp. for 5 Cycles r (0.75%+0.05:) Resistance to Soldering Heat JIS-C-5202 6.4 350Cr 10C for 3r 0.5 Seconds r (0.25%+0.05:) * Rated Continuous Working Voltage (RCW V)= Power Rating x Resistance Value YAGEO CORPORATION LEADED RESISTORS FLAME-PROOF TYPE Metal Film Resistors Normal & Miniature Style [ FMF Series ] FEATURES Power Rating 1/4W, 1/2W, 1W, 2W FlameProof Silicone Coating UL94V-0 Resistance Tolerance r 1% T.C.R. r 50ppm/C, r 100ppm/C DERATING CURVE INTRODUCTION Rated Load (%) 70C 100 The FMF series flame-proof type Metal Film 80 Resistors are manufactured by vacuum 60 deposit metal film on high thermal conductiv- 40 ity ceramic rods, and are coated with layers of 20 gray color flame-proof lacquer. These FMF flame-proof metal film resistor is 20 40 60 80 100 120 140 160 180 Ambient Temperature (C) designed to replace the metal oxide resistors and low power wire wound resistors, where when flame-proof and small size is needed. HOT-SPOT TEMPERATURE Surface Temp. Rise (C) Measuring Position 200 FMF2WS 150 100 FMF200 FMF1WS FMF100 FMF50S FMF-50 FMF-25 50 0 25 50 75 Applied Load, % of RCWV 100 DIMENSIONS Unit : mm STYLE od H L oD DIMENSION Normal Miniature L oD H od FMF-25 FMF50S 6.3r 0.5 2.4r 0.2 28r 2.0 0.6r 0.05 FMF-50 FMF1WS 9.0r 0.5 3.3r 0.3 26r 2.0 0.6r 0.05 FMF100 FMF2WS 11.5r 1.0 4.5r 0.5 35r 2.0 0.8r 0.05 FMF200 - 15.5r 1.0 5.0r 0.5 33r 2.0 0.8r 0.05 Note : ELECTRICAL CHARACTERISTICS STYLE FMF-25 FMF50S FMF-50 FMF1WS FMF100 Power Rating at 70C 1/4W 1/2W Operating Temp. Range -55C to +155C Maximum Working Voltage 250V 300V 350V 400V 500V 500V 500V Maximum Overload Voltage 500V 600V 700V 800V 1000V 1000V 1000V Dielectric Withstanding Voltage 400V 400V 500V 600V 750V 750V 750V Value Range r 1% 10:~1M: Temperature Coefficient (by Type) r 50ppm/C, r 100ppm/C 1W FMF2WS FMF200 2W * Standard resistance is 10:~1M:, below or over this resistance on request. ENVIRONMENTAL CHARACTERISTICS PERFORMANCE TEST TEST METHOD APPRAISE Short Time Overload JIS-C-5202 5.5 2.5 Times RCW V for 5 Seconds r (0.25%+0.05:) Dielectric Withstanding Voltage JIS-C-5202 5.7 in V-Block for 60 Seconds by Type Temperature Coefficient of Resistance JIS-C-5202 5.2 -55C to +155C by Type Insulation Resistance JIS-C-5202 5.6 in V-Block >1000M: Solderability JIS-C-5202 6.5 235C for 5r 0.5 Seconds 95% Min. Coverage Resistance to Solvent JIS-C-5202 6.9 IPA for 1 Min. with Ultrasonic No Deterioration of Coatings and Markings Terminal Strength Direct Load for 10 Sec. in The Direction of The Terminal Leads t2.5kg (24.5N) Pulse Overload JIS-C-5202 5.8 4 Times RCW V 10000 Cycles (1 Sec. on , 25 Sec. off) r (1%+0.05:) Load Life in Humidity JIS-C-5202 7.9 40r 2C, 90~95% RH at RCW V for 1000 Hrs. (1.5 Hrs. on , 0.5 Hrs. off ) r (1.5%+0.05:) Load Life JIS-C-5202 7.10 70C at RCW V for 1000 Hrs. (1.5 Hrs. on , 0.5 Hrs. off) r (1.5%+0.05:) Temperature Cycling JIS-C-5202 7.4 -55C Room Temp. +155C Room Temp. for 5 Cycles r (0.75%+0.05:) Resistance to Soldering Heat JIS-C-5202 6.4 350Cr 10C for 3r 0.5 Seconds r (0.25%+0.05:) * Rated Continuous Working Voltage (RCW V)= Power Rating x Resistance Value YAGEO CORPORATION LEADED RESISTORS PROFESSIONAL & FLAME-PROOF TYPE Metal Film Resistors Miniature Style [ FM0 Series ] FEATURES DIN 44061, 45921 part 107 CECC 40101-039, 40101-017 Flameproof Silicone Coating UL94V-0 Resistance Tolerance r 1% T.C.R. r 50ppm/C DERATING CURVE INTRODUCTION Rated Load (%) The FM0 Series are manufactured by high 70C 100 vacuum sputtering deposit metal film on high 80 thermal conductivity and specific gravity 60 ROSENTHAL ceramic or same grade rods. 40 The FM0207 are coated with multilayers of 20 light-green color flame-proof lacquer. The FM0207 meets severe overload test in 20 40 60 80 100 120 140 160 180 Ambient Temperature (C) accordance with UL specification # 1412 without fire hazard. HOT-SPOT TEMPERATURE Surface Temp. Rise (C) Measuring Position 200 150 100 50 FM0207 FM0204 0 25 50 75 100 Applied Load, % of RCWV DIMENSIONS Unit : mm od H L oD STYLE L oD H od FM0204 3.4r 0.3 1.9r 0.2 28r 2.0 0.5r 0.05 FM0207 6.3r 0.5 2.4r 0.2 28r 2.0 0.6r 0.05 Note : ELECTRICAL CHARACTERISTICS STYLE FM0204 FM0207 Power Rating at 70C 0.4W 0.6W Operating Temp. Range -55C to +155C Maximum Working Voltage 200V 300V Maximum Overload Voltage 400V 600V Dielectric Withstanding Voltage 300V 500V Value Range r 1% 10:~1M: Temperature Coefficient r 50ppm/C * Standard resistance is 10:~1M:, below or over this resistance on request. ENVIRONMENTAL CHARACTERISTICS PERFORMANCE TEST TEST METHOD APPRAISE Short Time Overload JIS-C-5202 5.5 2.5 Times RCW V for 5 Seconds r (0.25%+0.05:) Dielectric Withstanding Voltage JIS-C-5202 5.7 in V-Block for 60 Seconds by Type Temperature Coefficient of Resistance JIS-C-5202 5.2 -55C to +155C r 50ppm/C Insulation Resistance JIS-C-5202 5.6 in V-Block >1000M: Solderability JIS-C-5202 6.5 235C for 5r 0.5 Seconds 95% Min. Coverage Resistance to Solvent JIS-C-5202 6.9 IPA for 1 Min. with Ultrasonic No Deterioration of Coatings and Markings Terminal Strength Direct Load for 10 sec. in The Direction of The Terminal Leads t2.5kg (24.5N) Pulse Overload JIS-C-5202 5.8 4 Times RCW V 10000 Cycles (1 Sec. on , 25 Sec. off) r (1%+0.05:) Load Life in Humidity JIS-C-5202 7.9 40r 2C, 90~95% RH at RCW V for 1000 Hrs. (1.5 Hrs. on , 0.5 Hrs. off ) r (1.5%+0.05:) Load Life JIS-C-5202 7.10 70C at RCW V for 1000 Hrs. (1.5 Hrs. on , 0.5 Hrs. off) r (1.5%+0.05:) Temperature Cycling JIS-C-5202 7.4 -55C Room Temp. +155C Room Temp. for 5 Cycles r (0.75%+0.05:) Resistance to Soldering Heat JIS-C-5202 6.4 350Cr 10C for 3r 0.5 Seconds r (0.25%+0.05:) * Rated Continuous Working Voltage (RCW V)= Power Rating x Resistance Value YAGEO CORPORATION LEADED RESISTORS Power Flame-proof Type Metal Film Resistors FMP Series GENERAL PURPOSE Power Rating : 1/2W, 1W, 2W, 3W Resistance Tolerance : r 1% , r 5% High thermal conductivity and specific gravity rods FlameProof Silicone Coating : UL94V-0 Pink body color POWER DERATING CURVE For resistors operated in ambient temperatures above 70C , power rating must be derated in accordance with the curve below. Rated Load (%) 70C 100 80 60 40 20 20 40 60 80 100 120 140 160 180 Ambient Temperature (C) DIMENSIONS Unit : mm od H L STYLE L oD H od FMP-50 3.4r 0.3 1.9r 0.2 28r 2.0 0.5r 0.05 FMP100 6.3r 0.5 2.4r 0.2 28r 2.0 0.6r 0.05 FMP200 9.0r 0.5 3.9r 0.3 26r 2.0 0.8r 0.05 FMP300 15.5r 1.0 5.0r 0.5 33r 2.0 0.8r 0.05 oD Note : ELECTRICAL CHARACTERISTICS PERFORMANCE STYLE TEST METHOD FMP-50 FMP100 FMP200 FMP300 Power Rating at 70C 1/2W 1W 2W 3W Maximum Working Voltage 200V 350V 500V 750V Maximum Overload Voltage 400V 600V 700V 1000V 500V 500V 750V Dielectric Withstanding Voltage JIS-C-5202 5.7 in V-Block for 60 Seconds 300V Temperature Coefficient JIS-C-5202 5.2 Room Temp. Add 100C r 100ppm/C Short Time Overload JIS-C-5202 5.5 2.5 Times RCWV for 5 Sec. r 2.0%+0.05: Insulation Resistance JIS-C-5202 5.6 in V-Block >1,000M: Pulse Overload 4 Times RCWV 10,000 Cycles JIS-C-5202 5.8 (1 Sec. on , 25 Sec. off ) r 1.0%+0.05: Operating Temp. Range -55C to + 155C Value Rang r 1% 10: To 1M: for E24 or E96 Series Value Range r 5% 1: To 1M: for E24 Series * Resistance range for standard resistance, below or over this resistance on request. ENVIRONMENTAL CHARACTERISTICS PERFORMANCE TEST TEST METHOD APPRAISE Terminal Strength JIS-C-5202 6.1 Direct load for 10 Sec. in the Direction of the Terminal Leads t2.5kg (24.5N) Resistance to Soldering Heat JIS-C-5202 6.4 350C r 10C for 3 r 0.5 Seconds r 0.25%+0.05: Solderability JIS-C-5202 6.5 235C r 5C for 5 r 0.5 Seconds 95% Min. Coverage Resistance to Solvent JIS-C-5202 6.9 IPA for 1 Min. with Ultrasonic No Deterioration of Coatings and Markings Temperature Cycling JIS-C-5202 7.4 -55C Room Temp. +155C Room Temp. for 5 Cycles r 1.0%+0.05: Humidity JIS-C-5202 7.5 40r 2C, 90~95% RH for 1,000 Hrs. r 1.0%+0.05: Load Life in Humidity JIS-C-5202 7.9 40r 2C, 90~95% RH at RCW V for 1,000 Hrs. (1.5 Hrs. on , 0.5 Hrs. off ) r 2.0%+0.05: Load Life JIS-C-5202 7.10 70C at RCW V for 1,000 Hrs. (1.5 Hrs. on, 0.5 Hrs. off ) r 2.0%+0.05: Overload Flame Retardant JIS-C-5202 7.12 4 Times RCW V for 1 minute No evidence of flaming or arcing * Rated Continuous Working Voltage (RCW V)= Power Rating x Resistance Value YAGEO CORPORATION LEADED RESISTORS Metal Oxide Film Resistors FLAME-PROOF TYPE Normal & Miniature Style [ RSF Series ] FEATURES Low Cost, Prompt Delivery High Power-to-Size Ratio for Significant Space Savings Flameproof Silicone Coating (UL94V-0) High Surge/Overload Capability Non-Inductive Design Wide Resistance Range: 1:~1M: Resistance ToLerance: r 5% INTRODUCTION DERATING CURVE These Metal Oxide Resistors offer excellent Rated Load (%) 70C 100 performance in applications where stability 80 and uniformity of characteristics are desired. 60 They provide lower cost alternatives to 40 Carbon Composition Resistors and General 20 Purpose Metal Films. Metal Oxides also can 50 replace many low power General Purpose 100 150 200 250 Ambient Temperature (C) wirewound applications, saving both money and time, with shorter delivery cycles. HOT-SPOT TEMPERATURE The normal style & the miniature style of RSF Surface Temp. Rise (C) Measuring Position 150 RSF500 RSF300 RSF2WS RSF200 100 RSF100 50 RSF50S RSF-50 200 series are coated with layers of gray and pink RSF5WS RSF3WM, RSF5SS RSF3WS RSF1WS colors flame-proof lacquer respectively. 0 25 50 75 100 Applied Load, % of RCWV DIMENSIONS Unit : mm STYLE od H L oD DIMENSION Normal RSF-25 RSF-50 RSF100 RSF200 Miniature RSF50S RSF1WS RSF2WS RSF3WS L 6.3r 0.5 9.0r 0.5 11.5r 1.0 15.5r 1.0 oD 2.4r 0.2 3.3r 0.3 4.5r 0.5 5.0r 0.5 H 28r 2.0 26r 2.0 35r 2.0 33r 2.0 od 0.6r 0.05 0.6r 0.05 0.8r 0.05 0.8r 0.05 RSF5SS RSF300 RSF3WM RSF5WS 17.5r 1.0 24.5r 1.0 6.5r 1.0 8.5r 1.0 32r 2.0 38r 2.0 0.8r 0.05 0.8r 0.05 RSF500 - 24.5r 1.0 8.5r 1.0 38r 2.0 0.8r 0.05 * RSFIWS (MB Type) od0.8r 0.05 10 Note : ELECTRICAL CHARACTERISTICS STYLE RSF-25 RSF50S Power Rating at 70C 1/4W 1/2W Operating Temp. Range -55C to +155C Maximum Working Voltage 200V 250V 250V 300V 350V 350V Maximum Overload Voltage 300V 400V 400V 500V 600V Dielectric Withstanding Voltage 250V 350V 350V 400V 500V Value Range r 5% 1:~1M: Temperature Coefficient r 300ppm/C RSF-50 RSF1WS RSF100 RSF2WS RSF200 RSF3WS/ RSF300 RSF3WM RSF5SS/ RSF500 RSF5WS 1W 2W 3W 5W 350V 350V/450V 500V 500V/500V 750V 600V 600V 600V/700V 800V 800V/800V 1000V 500V 500V 500V/600V 700V 700V/750V 750V * Standard resistance is 1:~1M:, below or over this resistance on request. ENVIRONMENTAL CHARACTERISTICS PERFORMANCE TEST TEST METHOD APPRAISE Short Time Overload JIS-C-5202 5.5 2.5 Times RCW V for 5 Seconds r (1%+0.05:) Dielectric Withstanding Voltage JIS-C-5202 5.7 in V-Block for 60 Seconds by Type Temperature Coefficient of Resistance JIS-C-5202 5.2 -55C to +155C r 300ppm/C Insulation Resistance JIS-C-5202 5.6 in V-Block >1000M: Solderability JIS-C-5202 6.5 235C for 5r 0.5 Seconds 95% Min. Coverage Resistance to Solvent JIS-C-5202 6.9 IPA for 1 Min. with Ultrasonic No Deterioration of Coatings and Markings Terminal Strength Direct Load for 10 Sec. in The Direction of The Terminal Leads t2.5kg (24.5N) Pulse Overload JIS-C-5202 5.8 4 Times RCW V 10000 Cycles (1 Sec. on , 25 Sec. off) r (2%+0.05:) Load Life in Humidity JIS-C-5202 7.9 40r 2C, 90~95% RH at RCW V for 1000 Hrs. (1.5 Hrs. on , 0.5 Hrs. off ) r (5%+0.05:) Load Life JIS-C-5202 7.10 70C at RCWV for 1000 Hrs. (1.5 Hrs. on , 0.5 Hrs. off) r (5%+0.05:) Temperature Cycling JIS-C-5202 7.4 -55C Room Temp. +155C Room Temp. for 5 Cycles r (1%+0.05:) Resistance to Soldering Heat JIS-C-5202 6.4 350Cr 10C for 3r 0.5 Seconds r (1%+0.05:) * Rated Continuous Working Voltage (RCW V)= Power Rating x Resistance Value YAGEO CORPORATION LEADED RESISTORS Carbon Film Resistors CFR Series Normal & Miniature Style FEATURES Industry's Lowest Cost Delivery From Stock in Bulk, Taped and Strip Pack Exceptional Long-Term Stability Exceeds Carbon Comp MIL-R-11 Performance Resistance Tolerance: r 2%, r 5% Variety of Packaging-Bulk, Strip Pack, 26mm and 52mm Tape and Reel, Cut and Formed, or Radial Panasert/Avisert INTRODUCTION DERATING CURVE HOT-SPOT TEMPERATURE Rated Load (%) Surface Temp. Rise (C) Billions of products are already in use worldwide in all types of applications-from process control instrumentation to telephone receivers and FM radio to color television. 70C 100 Measuring Position 200 CFR2WS 80 150 The secret is in a proprietary production CFR200 CFR1WS 60 system and baking by a uniquely designed and 100 40 automated production technique. Years of CFR100 CFR50S 50 20 experience in making raw materials and production machinery prove the unique 20 40 60 quality and high reliability of these products. 80 100 120 140 160 CFR-50 CFR-12 0 180 25 50 Ambient Temperature (C) 75 CFR25S CFR-25 100 Applied Load, % of RCWV The meet-or far exceed-such specifications as EIA RS196A. JIS-C-6402 and IEC-115. TABLE 1 TEMPERATURE COEFFICIENT The resistors are coated with layers of tan color lacquer. STYLE Max. Value of Temp. Coefficient ppm/C under 100K: 100K: ~ 1M: 1M: ~ 10M: CFR100, CFR200, CFR2WS r 350 -500 -1500 CFR-12, CFR-25, CFR-50, CFR25S, CFR50S, CFR1WS +350 -500 -700 -1500 DIMENSIONS Unit : mm STYLE od H L oD DIMENSION Normal Miniature L oD H od CFR-12 CFR-25 CFR-50 CFR100 CFR25S CFR50S CFR1WS CFR2WS 3.4r 0.3 6.3r 0.5 9.0r 0.5 11.5r 1.0 1.9r 0.2 2.4r 0.2 3.3r 0.3 4.5r 0.5 28r 2.0 28r 2.0 26r 2.0 35r 2.0 0.5r 0.05 0.6r 0.05 0.6r 0.05 0.8r 0.05 CFR200 - 15.5r 1.0 5.0r 0.5 33r 2.0 0.8r 0.05 Note : ELECTRICAL CHARACTERISTICS STYLE CFR-12 CFR25S CFR-25 CFR50S CFR-50 Power Rating at 70C 1/6W 1/4W Operating Temp. Range -55C to +155C Maximum Working Voltage 150V 200V 250V 300V 350V 400V 500V 500V 500V Maximum Overload Voltage 300V 400V 500V 600V 700V 800V 1000V 1000V 1000V Dielectric Withstanding Voltage 300V 400V 500V 500V 500V 700V 1000V 1000V 1000V Value Range r 2%, r 5% 1:~10M: Temperature Coefficient (by Type) see TABLE 1 1/2W CFR1WS CFR100 1W CFR2WS CFR200 2W * Standard resistance is 1:~10M:, below or over this resistance on request. ENVIRONMENTAL CHARACTERISTICS PERFORMANCE TEST TEST METHOD APPRAISE Short Time Overload JIS-C-5202 5.5 2.5 Times RCW V for 5 Seconds r (0.75%+0.05:) Dielectric Withstanding Voltage JIS-C-5202 5.7 in V-Block for 60 Seconds by Type Temperature Coefficient of Resistance JIS-C-5202 5.2 -55C to +155C by Type Insulation Resistance JIS-C-5202 5.6 in V-Block >1000M: Solderability JIS-C-5202 6.5 235C for 5r 0.5 Seconds 95% Min. Coverage Resistance to Solvent JIS-C-5202 6.9 IPA for 1 Min. with Ultrasonic No Deterioration of Coatings and Markings Terminal Strength Direct Load for 10 Sec. in The Direction of The Terminal Leads t2.5kg (24.5N) Pulse Overload JIS-C-5202 5.8 4 Times RCW V 10000 Cycles (1 Sec. on , 25 Sec. off) r (1%+0.05:) Load Life in Humidity JIS-C-5202 7.9 40r 2C, 90~95% RH at RCW V for 1000 Hrs. (1.5 Hrs. on , 0.5 Hrs. off ) r (3%+0.05:) Load Life JIS-C-5202 7.10 70C at RCW V for 1000 Hrs. (1.5 Hrs. on , 0.5 Hrs. off) r (3%+0.05:) Temperature Cycling JIS-C-5202 7.4 -55C Room Temp. +155C Room Temp. for 5 Cycles r (1%+0.05:) Resistance to Soldering Heat JIS-C-5202 6.4 350Cr 10C for 3r 0.5 Seconds r (1%+0.05:) * Rated Continuous Working Voltage (RCW V)= Power Rating x Resistance Value YAGEO CORPORATION LEADED RESISTORS Carbon Film Resistors PROFESSIONAL TYPE Miniature Style [ CF0 Series ] FEATURES Excellent Long-Term Stability Miniature in Size Resistance Tolerance: r 5% Resistance Range: 1:~10M: INTRODUCTION DERATING CURVE HOT-SPOT TEMPERATURE The CF0 series are manufactured by Coating Rated Load (%) Surface Temp. Rise (C) a homogeneous film of pure carbon on high grade ceramic rods, resistance less than 10: 70C 100 have an electroless-deposited nickel film. 80 The resistors are coated with layers of tan 60 color lacquer. 40 Measuring Position 200 150 100 50 20 20 40 60 80 100 120 140 160 180 CF0207 CF0204 0 25 Ambient Temperature (C) 50 75 100 Applied Load, % of RCWV TABLE 1 TEMPERATURE COEFFICIENT STYLE Max. Value of Temp. Coefficient ppm/C under 100K: 100K: ~ 1M: 1M: ~ 10M: CF0204, CF0207 +350 -500 -700 -1500 DIMENSIONS Unit : mm od H L oD STYLE L oD H od CF0204 3.4r 0.3 1.9r 0.2 28r 2.0 0.5r 0.05 CF0207 6.3r 0.5 2.4r 0.2 28r 2.0 0.6r 0.05 Note : ELECTRICAL CHARACTERISTICS STYLE CF0204 CF0207 Power Rating at 70C 0.4W 0.6W Operating Temp. Range -55C to +155C Maximum Working Voltage 200V 300V Maximum Overload Voltage 400V 600V Dielectric Withstanding Voltage 300V 500V Value Range r 5% 1:~10M: Temp. Coefficient (by Type) see TABLE 1 * Standard resistance is 1:~10M:, below or over this resistance on request. ENVIRONMENTAL CHARACTERISTICS PERFORMANCE TEST TEST METHOD APPRAISE Short Time Overload JIS-C-5202 5.5 2.5 Times RCW V for 5 Seconds r (0.75%+0.05:) Dielectric Withstanding Voltage JIS-C-5202 5.7 in V-Block for 60 Seconds by Type Temperature Coefficient of Resistance JIS-C-5202 5.2 -55C to +155C by Type Insulation Resistance JIS-C-5202 5.6 in V-Block >1000M: Solderability JIS-C-5202 6.5 235C for 5r 0.5 Seconds 95% Min. Coverage Resistance to Solvent JIS-C-5202 6.9 IPA for 1 Min. with Ultrasonic No Deterioration of Coatings and Markings Terminal Strength Direct Load for 10 Sec. in The Direction of The Terminal Leads t2.5kg (24.5N) Pulse Overload JIS-C-5202 5.8 4 Times RCW V 10000 Cycles (1 Sec. on , 25 Sec. off) r (1%+0.05:) Load Life in Humidity JIS-C-5202 7.9 40r 2C, 90~95% RH at RCW V for 1000 Hrs. (1.5 Hrs. on , 0.5 Hrs. off ) r (3%+0.05:) Load Life JIS-C-5202 7.10 70C at RCW V for 1000 Hrs. (1.5 Hrs. on , 0.5 Hrs. off) r (3%+0.05:) Temperature Cycling JIS-C-5202 7.4 -55C Room Temp. +155C Room Temp. for 5 Cycles r (1%+0.05:) Resistance to Soldering Heat JIS-C-5202 6.4 350Cr 10C for 3r 0.5 Seconds r (1%+0.05:) * Rated Continuous Working Voltage (RCW V)= Power Rating x Resistance Value YAGEO CORPORATION LEADED RESISTORS Carbon Film Resistors FLAME-PROOF TYPE Normal & Miniature Style [ FCR Series ] FEATURES Low Cost. Prompt Delivery High Power-to-Size Ratio for Significant Space Savings Flameproof Silicone Coating (UL94V-0) Excellent Long-Term Stability Wide Resistance Range: 1:~10M: Resistance Tolerance: r 5% INTRODUCTION DERATING CURVE HOT-SPOT TEMPERATURE Rated Load (%) Surface Temp. Rise (C) The FCR series flame-proof Carbon Film Resistors are manufactured by Coating a homogeneous film of pure carbon on high 70C 100 FCR2WS 80 10: have an electroless deposited nickel film, and are coated with layers of gray color 60 flame-proof lacquer. These resistors meet 40 overload tests in accordance with UL 20 Measuring Position 200 grade ceramic rods, resistance less than 150 FCR200 FCR1WS 100 specification #1412 without producing a FCR100 50 20 40 60 fire hazard. 80 100 120 140 160 180 FCR50S FCR-50 FCR-25 0 25 50 Ambient Temperature (C) 75 100 Applied Load, % of RCWV TABLE1 TEMPERATURE COEFFICIENT STYLE Max. Value of Temp. Coefficient ppm/C under 100K: 100K: ~ 1M: 1M: ~ 10M: FCR100, FCR200, FCR2WS r 350 -500 -1500 FCR-25, FCR-50, FCR50S, FCR1WS +350 -500 -700 -1500 DIMENSIONS Unit : mm STYLE od H L oD * The 5th is black color band for FCR series DIMENSION Normal Miniature L oD H od FCR-25 FCR50S 6.3r 0.5 2.4r 0.2 28r 2.0 0.6r 0.05 FCR-50 FCR1WS 9.0r 0.5 3.3r 0.3 26r 2.0 0.6r 0.05 FCR100 FCR2WS 11.5r 1.0 4.5r 0.5 35r 2.0 0.8r 0.05 FCR200 - 15.5r 1.0 5.0r 0.5 33r 2.0 0.8r 0.05 Note : ELECTRICAL CHARACTERISTICS STYLE FCR-25 FCR50S FCR-50 FCR1WS FCR100 Power Rating at 70C 1/4W 1/2W Operating Temp. Range -55C to +155C Maximum Working Voltage 250V 300V 350V 400V 500V 500V 500V Maximum Overload Voltage 500V 600V 700V 800V 1000V 1000V 1000V Dielectric Withstanding Voltage 400V 400V 500V 600V 750V 750V 750V Value Range r 2%, r 5% 1:~10M: Temperature Coefficient (by Type) see TABLE1 1W FCR2WS FCR200 2W * Standard resistance is 1:~10M:, below or over this resistance on request. ENVIRONMENTAL CHARACTERISTICS PERFORMANCE TEST TEST METHOD APPRAISE Short Time Overload JIS-C-5202 5.5 2.5 Times RCW V for 5 Seconds r (0.75%+0.05:) Dielectric Withstanding Voltage JIS-C-5202 5.7 in V-Block for 60 Seconds by Type Temperature Coefficient of Resistance JIS-C-5202 5.2 -55C to +155C by Type Insulation Resistance JIS-C-5202 5.6 in V-Block >1000M: Solderability JIS-C-5202 6.5 235C for 5r 0.5 Seconds 95% Min. Coverage Resistance to Solvent JIS-C-5202 6.9 IPA for 1 Min. with Ultrasonic No Deterioration of Coatings and Markings Terminal Strength Direct load for 10 Sec. in The Direction of The Terminal Leads t2.5kg (24.5N) Pulse Overload JIS-C-5202 5.8 4 Times RCW V 10000 Cycles (1 Sec. on , 25 Sec. off) r (1%+0.05:) Load Life in Humidity JIS-C-5202 7.9 40r 2C, 90~95% RH at RCW V for 1000 Hrs. (1.5 Hrs. on , 0.5 Hrs. off ) r (3%+0.05:) Load Life JIS-C-5202 7.10 70C at RCW V for 1000 Hrs. (1.5 Hrs. on , 0.5 Hrs. off) r (3%+0.05:) Temperature Cycling JIS-C-5202 7.4 -55C Room Temp. +155C Room Temp. for 5 Cycles r (1%+0.05:) Resistance to Soldering Heat JIS-C-5202 6.4 350Cr 10C for 3r 0.5 Seconds r (1%+0.05:) * Rated Continuous Working Voltage (RCW V)= Power Rating x Resistance Value YAGEO CORPORATION LEADED RESISTORS PROFESSIONAL & FLAME-PROOF TYPE Carbon Film Resistors Miniature Style [ FC0 Series ] FEATURES Excellent Long-Term Stability Miniature in Size Flameproof Silicone Coating (UL94V-0) Resistance Tolerance: r 5% Resistance Range: 1:~10M: INTRODUCTION The FC0 series are manufactured by Coating DERATING CURVE HOT-SPOT TEMPERATURE Rated Load (%) Surface Temp. Rise (C) 70C 100 a homogeneous film of pure carbon on high 80 grade ceramic rods, resistance less than 10: 60 have an electroless-deposited nickel film. 40 The FC0207 are coated with layers of green 20 150 100 50 color flame-proof lacquer. 20 The FC0207 resistors meet overload test in Measuring Position 200 40 60 80 100 120 140 160 180 FC0207 FC0204 0 25 Ambient Temperature (C) accordance with UL specification #1412 50 75 100 Applied Load, % of RCWV without producing a fire hazard. TABLE 1 TEMPERATURE COEFFICIENT STYLE Max. Value of Temp. Coefficient ppm/C under 100K: 100K: ~ 1M: 1M: ~ 10M: FC0204, FC0207 +350 -500 -700 -1500 DIMENSIONS Unit : mm od H L oD STYLE L oD H od FC0204 3.4r 0.3 1.9r 0.2 28r 2.0 0.5r 0.05 FC0207 6.3r 0.5 2.4r 0.2 28r 2.0 0.6r 0.05 Note : ELECTRICAL CHARACTERISTICS STYLE FC0204 FC0207 Power Rating at 70C 0.4W 0.6W Operating Temp. Range -55C to +155C Maximum Working Voltage 200V 300V Maximum Overload Voltage 400V 600V Dielectric Withstanding Voltage 300V 500V Value Range r 5% 1:~10M: Temperature Coefficient (by Type) see TABLE 1 * Standard resistance is 1:~10M:, below or over this resistance on request. ENVIRONMENTAL CHARACTERISTICS PERFORMANCE TEST TEST METHOD APPRAISE Short Time Overload JIS-C-5202 5.5 2.5 Times RCW V for 5 Seconds r (0.75%+0.05:) Dielectric Withstanding Voltage JIS-C-5202 5.7 in V-Block for 60 Seconds by Type Temperature Coefficient of Resistance JIS-C-5202 5.2 -55C to +155C by Type Insulation Resistance JIS-C-5202 5.6 in V-Block >1000M: Solderability JIS-C-5202 6.5 235C for 5r 0.5 Seconds 95% Min. Coverage Resistance to Solvent JIS-C-5202 6.9 IPA for 1 Min. with Ultrasonic No Deterioration of Coatings and Markings Terminal Strength Direct Load for 10 Sec. in The Direction of The Terminal Leads t2.5kg (24.5N) Pulse Overload JIS-C-5202 5.8 4 Times RCW V 10000 Cycles (1 Sec. on , 25 Sec. off) r (1%+0.05:) Load Life in Humidity JIS-C-5202 7.9 40r 2C, 90~95% RH at RCW V for 1000 Hrs. (1.5 Hrs. on , 0.5 Hrs. off ) r (3%+0.05:) Load Life JIS-C-5202 7.10 70C at RCW V for 1000 Hrs. (1.5 Hrs. on , 0.5 Hrs. off) r (3%+0.05:) Temperature Cycling JIS-C-5202 7.4 -55C Room Temp. +155C Room Temp. for 5 Cycles r (1%+0.05:) Resistance to Soldering Heat JIS-C-5202 6.4 350Cr 10C for 3r 0.5 Seconds r (1%+0.05:) * Rated Continuous Working Voltage (RCW V)= Power Rating x Resistance Value YAGEO CORPORATION LEADED RESISTORS Non Inductive Type Metal Film Resistors NCR Series Normal Style FEATURES Power Rating : 1/4W, 1/2W, 1W, 2W Resistance Tolerance : r 5% , r 10% FlameProof Silicone Coating : UL94V-0 Gray body color The 5th color band is green to represent non-inductive resistors Inductance : <1PH POWER DERATING CURVE For resistors operated in ambient temperatures above 70C , power rating must be derated in accordance with the curve below. Rated Load (%) 70C 100 80 60 40 20 20 40 60 80 100 120 140 160 180 Ambient Temperature (C) DIMENSIONS Unit : mm od H L STYLE L oD H od NCR-25 6.3r 0.5 2.4r 0.2 28r 2.0 0.6r 0.05 NCR-50 9.0r 0.5 3.3r 0.3 26r 2.0 0.7r 0.05 NCR100 11.5r 1.0 4.5r 0.5 35r 2.0 0.8r 0.05 NCR200 15.5r 1.0 5.0r 0.5 33r 2.0 0.8r 0.05 oD Note : ELECTRICAL CHARACTERISTICS PERFORMANCE STYLE TEST METHOD Power Rating at 70C NCR-25 NCR-50 NCR100 NCR200 1/4W 1/2W 1W 2W 700V 1000V 1000V Dielectric Withstanding Voltage JIS-C-5202 5.7 in V-Block for 60 Seconds 500V Temperature Coefficient JIS-C-5202 5.2 Room Temp. Add 100C r 500ppm/C Short Time Overload JIS-C-5202 5.5 2.5 Times RCWV for 5 Seconds r 0.75%+0.05: Insulation Resistance JIS-C-5202 5.6 in V-Block >1,000M: Pulse Overload 4 Times RCWV 10,000 Cycles JIS-C-5202 5.8 (1 Sec. on , 25 Sec. off ) r 0.75%+0.05: Operating Temp. Range -55C to + 155C Value Range 2.2: To 6K: for E24 Series * Resistance range for standard resistance, below or over this resistance on request. ENVIRONMENTAL CHARACTERISTICS PERFORMANCE TEST TEST METHOD APPRAISE Terminal Strength JIS-C-5202 6.1 Direct load for 10 Sec. in the Direction of the Terminal Leads t2.5kg (24.5N) Resistance to Soldering Heat JIS-C-5202 6.4 350C r 10C for 3 r 0.5 Seconds r 1.0%+0.05: Solderability JIS-C-5202 6.5 235C r 5C for 5 r 0.5 Seconds 95% Min. Coverage Resistance to Solvent JIS-C-5202 6.9 IPA for 1 Min. with Ultrasonic No Deterioration of Coatings and Markings Temperature Cycling JIS-C-5202 7.4 -55C Room Temp. +155C Room Temp. for 5 Cycles r 1.0%+0.05: Humidity JIS-C-5202 7.5 40r 2C, 90~95% RH for 1,000 Hrs. r 1.0%+0.05: Load Life in Humidity JIS-C-5202 7.9 40r 2C, 90~95% RH at RCW V for 1,000 Hrs. (1.5 Hrs. on , 0.5 Hrs. off ) r 3.0%+0.05: Load Life JIS-C-5202 7.10 70C at RCW V for 1,000 Hrs. (1.5 Hrs. on, 0.5 Hrs. off ) r 3.0%+0.05: Overload Flame Retardant JIS-C-5202 7.12 4 Times RCW V for 1 minute No evidence of flaming or arcing * Rated Continuous Working Voltage (RCW V)= Power Rating x Resistance Value YAGEO CORPORATION LEADED RESISTORS Non Inductive Type Metal Film Resistors NCR Series Miniature Style FEATURES Power Rating : 1/2WS, 1WS, 2WS, 3WS Resistance Tolerance : r 5% , r 10% FlameProof Silicone Coating : UL94V-0 High thermal conductivity and specific gravity rods. Pink body color The 5th color band is green to represent non-inductive resistors Inductance : <1 P H POWER DERATING CURVE For resistors operated in ambient temperatures above 70C , power rating must be derated in accordance with the curve below. Rated Load (%) 70C 100 80 60 40 20 20 40 60 80 100 120 140 160 180 Ambient Temperature (C) DIMENSIONS Unit : mm od H L oD STYLE L oD H od NCR50S 6.3r 0.5 2.4r 0.2 28r 2.0 0.6r 0.05 NCR1WS 9.0r 0.5 3.3r 0.3 26r 2.0 0.7r 0.05 NCR2WS 11.5r 1.0 4.5r 0.5 35r 2.0 0.8r 0.05 NCR3WS 15.5r 1.0 5.0r 0.5 33r 2.0 0.8r 0.05 Note : ELECTRICAL CHARACTERISTICS PERFORMANCE STYLE TEST METHOD Power Rating at 70C NCR50S NCR1WS NCR2WS NCR3WS 1/2W 1W 2W 3W 700V 1000V 1000V Dielectric Withstanding Voltage JIS-C-5202 5.7 in V-Block for 60 Seconds 500V Temperature Coefficient JIS-C-5202 5.2 Room Temp. Add 100C r 500ppm/C Short Time Overload JIS-C-5202 5.5 2.5 Times RCWV for 5 Seconds r 2.0%+0.05: Insulation Resistance JIS-C-5202 5.6 in V-Block >1,000M: Pulse Overload 4 Times RCWV 10,000 Cycles JIS-C-5202 5.8 (1 Sec. on , 25 Sec. off ) r 1.0%+0.05: Operating Temp. Range -55C to + 155C Value Range 2.2: To 6K: for E24 Series * Resistance range for standard resistance, below or over this resistance on request. ENVIRONMENTAL CHARACTERISTICS PERFORMANCE TEST TEST METHOD APPRAISE Terminal Strength JIS-C-5202 6.1 Direct load for 10 Sec. in the Direction of the Terminal Leads t2.5kg (24.5N) Resistance to Soldering Heat JIS-C-5202 6.4 350C r 10C for 3 r 0.5 Seconds r 1.0%+0.05: Solderability JIS-C-5202 6.5 235C r 5C for 5 r 0.5 Seconds 95% Min. Coverage Resistance to Solvent JIS-C-5202 6.9 IPA for 1 Min. with Ultrasonic No Deterioration of Coatings and Markings Temperature Cycling JIS-C-5202 7.4 -55C Room Temp. +155C Room Temp. for 5 Cycles r 1.0%+0.05: Humidity JIS-C-5202 7.5 40r 2C, 90~95% RH for 1,000 Hrs. r 1.0%+0.05: Load Life in Humidity JIS-C-5202 7.9 40r 2C, 90~95% RH at RCW V for 1,000 Hrs. (1.5 Hrs. on , 0.5 Hrs. off ) r 3.0%+0.05: Load Life JIS-C-5202 7.10 70C at RCW V for 1,000 Hrs. (1.5 Hrs. on, 0.5 Hrs. off ) r 3.0%+0.05: Overload Flame Retardant JIS-C-5202 7.12 4 Times RCW V for 1 minute No evidence of flaming or arcing * Rated Continuous Working Voltage (RCW V)= Power Rating x Resistance Value YAGEO CORPORATION LEADED RESISTORS Zerohm Resistors ZOR Series SPECIFICATIONS INTRODUCTION Maximum Resistance 0.005: Min. Insulation Resistance Dry Wet 10,000M: 100M: Min. Dielectric Withstanding Voltage Atmospheric Reduced 500V RMS 325V RMS Insulation Flammability Resistor Insulation is Self Extinguishing within 10 Seconds After Externally Applied Flame is Removed Current Rating 15 AMPS at 70C for 1/4W 10 AMPS at 70C for 1/6W * Similar to a 1/4W resistor (1/6W size also available, typical resistance 0.004:) * Ideal for automatic insertion or Cut and Form * Available in Tape/Reel, Tape/Box and Bulk * Film type Zerohm also available in 1/4W (ZOR-25) and 1/6W (ZOR-12) size DIMENSIONS Unit : mm L H od oD Single Black Color Band Denotes Zero Resistance. STYLE L oD H od ZOR-12 3.3r 0.3 1.8r 0.3 28r 2.0 0.5r 0.05 ZOR-25 6.3r 0.5 2.3r 0.3 28r 2.0 0.6r 0.05 YAGEO CORPORATION SMD RESISTORS JPW Series Jumper Wires SPECIFICATIONS Material of Jumper Wire Soft Copper Wire with Tin Plating Conductor Resistance 0.005: /cm Wire Diameter o0.5 o0.6 o0.7 o0.8 o1.0(r 0.05mm) Tension Strength CNS 8938 within 28kg/mm2 CNS 8938 o0.5~o0.6mm over 24% CNS 8938 o0.7~o1.0mm over 26% o0.5mm Minmum 94% o0.6~o1.0mm Minmum 96% CNS 8938 o0.5mm Load 250 g 3 cycles CNS 8938 o0.6~o0.8mm Load 500 g 3 cycles CNS 8938 o1.0mm Load 1.0 kg 3 cycles Extension Rate Conductivity INTRODUCTION Jumper wires or crossovers, as they are Twisting Strength Solderability JIS520 6-5 235Cr 5C , 5r 0.5 sec. Coverage 95% Element of Plating JIS-H3101 Tin Minimum 99% Thickness of Plating 3~5P devices between points on a P.C.Board. Generally they are used for the following reasons: * Inability to connect two points on a P.C. Board due to other circuit paths which o0.5mm Current Rating sometimes called, are basically interconnection 6 AMPS at 70C must be crossed over. * An After-the-Fact design change that o0.6mm 7.5 AMPS at 70C o0.7mm 8.5 AMPS at 70C * Circuit tuning by changing point connections. o0.8mm 10 AMPS at 70C Jumper wires offers a quick simple solution to o1.0mm 15 AMPS at 70C these problems. They are especially suited for requires new point connections. automatic machine insertion on lead tape or Appearance Smooth and Shining available in all packaging styles including precut and formed leads for manual insertion. DIMENSIONS Unit : mm STYLE od L JPW-05 0.5r 0.05 26r 1 52.4r 1 _ JPW-06 0.6r 0.05 26r 1 52.4r 1 73r 1 JPW-07 0.7r 0.05 26r 1 52.4r 1 73r 1 JPW-08 0.8r 0.05 26r 1 52.4r 1 73r 1 JPW-10 1.0r 0.05 26r 1 52.4r 1 73r 1 YAGEO CORPORATION LEADED RESISTORS Wire Wound Resistors FLAME-PROOF TYPE Normal & Miniature Style [ KNP Series ] GENERAL PURPOSE Power Rating : 1/4W, 1/2W, 1W, 2W, 3W, 5W, 7W Resistance Tolerance : r 5% FlameProof Silicone Coating : UL94V-0 Green body color Stable performance in diverse environments High safety standard POWER DERATING CURVE INTRODUCTION For resistors operated in ambient temperatures above 20C , power rating * The resistor is fabricated using a suitable must be derated in accordance with the curve below. fiberglass or ceramic core with the resistance wire securely crimped to the terminals * Small in size comparatively than other kind resistor Rated Load (%) 100 20 C 80 * Electrical and Mectanical stability and high 60 reliability 40 * The KNP/NKN series are coated with 20 layers of green color flame-proof lacquer. 20 The resistors meet overload tests in 60 100 140 200 accordance with UL specification #1412 260 275 300 Ambient Temperature ( C ) without producing a fire hazard DIMENSIONS Unit : mm STYLE od H L oD DIMENSION Normal Miniature L oD H od KNP-25 KNP50S 6.3r 0.5 2.5r 0.3 28r 2.0 0.6r 0.05 KNP-50 KNP1WS 9.0r 0.5 3.3r 0.3 26r 2.0 0.6r 0.05 KNP100 KNP2WS 11.5r 1.0 4.5r 0.5 35r 2.0 0.8r 0.05 KNP200 KNP3WS 15.5r 1.0 5.0r 0.5 33r 2.0 0.8r 0.05 KNP300 KNP5WS 17.5r 1.0 6.5r 1.0 32r 2.0 0.8r 0.05 KNP500 KNP7WS 24.5r 1.0 8.5r 1.0 39r 2.0 0.8r 0.05 Note : ELECTRICAL CHARACTERISTICS PERFORMANCE STYLE TEST METHOD Limiting Voltage APPRAISE V= Px R Temperature Coefficient JIS-C-5202 5.2 Room Temp. Add 100C r 300ppm/C Rated Load JIS-C-5202 5.4 RCWV for 30 minutes r 1.0%+0.05: Short Time Overload JIS-C-5202 5.5 2.5 Times RCWV for 5 Seconds r 2.0%+0.05: Insulation Resistance JIS-C-5202 5.6 in V-Block , test voltage 500V >100M: Dielectric Withstanding Voltage JIS-C-5202 5.7 in V-Block for 60 Seconds 300V Operating Temp. Range -40C to + 200C Standard Value Range E24 Series Minimum Value Range 0.05: * Resistance range for standard resistance, below or over this resistance on request. ENVIRONMENTAL CHARACTERISTICS PERFORMANCE TEST TEST METHOD APPRAISE Terminal Strength JIS-C-5202 6.1 Direct load for 10 Sec. in the Direction of the Terminal Leads t2.5kg (24.5N) Resistance to Soldering Heat JIS-C-5202 6.4 350C r 10C for 3 r 0.5 Seconds r 1.0%+0.05: Solderability JIS-C-5202 6.5 235C r 5C for 5 r 0.5 Seconds 95% Min. Coverage Resistance to Solvent JIS-C-5202 6.9 IPA for 1 Min. with Ultrasonic No Deterioration of Coatings and Markings Temperature Cycling JIS-C-5202 7.4 -55C Room Temp. +155C Room Temp. for 5 Cycles r 1.0%+0.05: Humidity JIS-C-5202 7.5 40r 2C, 90~95% RH for 1,000 Hrs. r 3.0%+0.05: Load Life in Humidity JIS-C-5202 7.9 40r 2C, 90~95% RH at RCW V for 1,000 Hrs. (1.5 Hrs. on , 0.5 Hrs. off ) r 5.0%+0.05: Load Life JIS-C-5202 7.10 70C at RCW V for 1,000 Hrs. (1.5 Hrs. on, 0.5 Hrs. off ) r 5.0%+0.05: Overload Flame Retardant JIS-C-5202 7.12 4 Times RCW V for 1 minute No evidence of flaming or arcing * Rated Continuous Working Voltage (RCW V)= Power Rating x Resistance Value YAGEO CORPORATION LEADED RESISTORS Wire Wound Resistors Non Inductive Type NKN Series GENERAL PURPOSE Power Rating : 1/2W, 1W, 2W, 3W, 5W, 7W Resistance Tolerance : r 5% FlameProof Silicone Coating : UL94V-0 Green body color The 5th color band is black to represent non-inductive resistors High safety standard POWER DERATING CURVE For resistors operated in ambient temperatures above 20C , power rating must be derated in accordance with the curve below. Rated Load (%) 100 20 C 80 60 40 20 20 60 100 140 200 260 275 300 Ambient Temperature ( C ) DIMENSIONS Unit : mm STYLE od H L oD DIMENSION Normal Miniature L oD H od NKN-50 NKN1WS 9.0r 0.5 3.3r 0.3 26r 2.0 0.6r 0.05 NKN100 NKN2WS 11.5r 1.0 4.5r 0.5 35r 2.0 0.8r 0.05 NKN200 NKN3WS 15.5r 1.0 5.0r 0.5 33r 2.0 0.8r 0.05 NKN300 NKN5WS 17.5r 1.0 6.5r 1.0 32r 2.0 0.8r 0.05 NKN500 NKN7WS 24.5r 1.0 8.5r 1.0 39r 2.0 0.8r 0.05 Note : ELECTRICAL CHARACTERISTICS PERFORMANCE STYLE TEST METHOD Limiting Voltage APPRAISE V= Px R Temperature Coefficient JIS-C-5202 5.2 Room Temp. Add 100C r 300ppm/C Rated Load JIS-C-5202 5.4 RCWV for 30 minutes r 1.0%+0.05: Short Time Overload JIS-C-5202 5.5 2.5 Times RCWV for 5 Seconds r 2.0%+0.05: Insulation Resistance JIS-C-5202 5.6 in V-Block , test voltage 500V >100M: Dielectric Withstanding Voltage JIS-C-5202 5.7 in V-Block for 60 Seconds 250V Operating Temp. Range -40C to + 200C Standard Value Range E24 Series Minimum Value Range 0.05: * Resistance range for standard resistance, below or over this resistance on request. ENVIRONMENTAL CHARACTERISTICS PERFORMANCE TEST TEST METHOD APPRAISE Terminal Strength JIS-C-5202 6.1 Direct load for 10 Sec. in the Direction of the Terminal Leads t2.5kg (24.5N) Resistance to Soldering Heat JIS-C-5202 6.4 350C r 10C for 3 r 0.5 Seconds r 1.0%+0.05: Solderability JIS-C-5202 6.5 235C r 5C for 5 r 0.5 Seconds 95% Min. Coverage Resistance to Solvent JIS-C-5202 6.9 IPA for 1 Min. with Ultrasonic No Deterioration of Coatings and Markings Temperature Cycling JIS-C-5202 7.4 -55C Room Temp. +155C Room Temp. for 5 Cycles r 1.0%+0.05: Humidity JIS-C-5202 7.5 40r 2C, 90~95% RH for 1,000 Hrs. r 3.0%+0.05: Load Life in Humidity JIS-C-5202 7.9 40r 2C, 90~95% RH at RCW V for 1,000 Hrs. (1.5 Hrs. on , 0.5 Hrs. off ) r 5.0%+0.05: Load Life JIS-C-5202 7.10 70C at RCW V for 1,000 Hrs. (1.5 Hrs. on, 0.5 Hrs. off ) r 5.0%+0.05: Overload Flame Retardant JIS-C-5202 7.12 4 Times RCW V for 1 minute No evidence of flaming or arcing * Rated Continuous Working Voltage (RCW V)= Power Rating x Resistance Value YAGEO CORPORATION LEADED RESISTORS Fusible Type Metal Film Resistors Normal Style [ FRM Series ] FEATURES Power Rating : 1/4W, 1/2W, 1W, 2W Resistance tolerance : r 5% FlameProof Silicone Coating : UL94V-0 Gray body color The 5th color band is white to represent fusible resistors POWER DERATING CURVE For resistors operated in ambient temperatures above 70C , power rating must be derated in accordance with the curve below. Rated Load (%) 70C 100 80 60 40 20 20 40 60 80 100 120 140 160 180 Ambient Temperature (C) FUSING CHARACTERISTICS Fusing time within 30 seconds at 16 times of rated power Fusing residual resistive value at least 100 times rated resistance DIMENSIONS Unit : mm od H L oD STYLE L oD H od FRM-25 6.3r 0.5 2.4r 0.2 28r 2.0 0.6r 0.05 FRM-50 9.0r 0.5 3.3r 0.3 26r 2.0 0.6r 0.05 FRM100 11.5r 1.0 4.5r 0.5 35r 2.0 0.8r 0.05 FRM200 15.5r 1.0 5.0r 0.5 33r 2.0 0.8r 0.05 Note : ELECTRICAL CHARACTERISTICS PERFORMANCE STYLE TEST METHOD Power Rating at 70C FRM-25 FRM-50 FRM100 FRM200 1/4W 1/2W 1W 2W 250V 350V 350V Dielectric Withstanding Voltage JIS-C-5202 5.7 in V-Block for 60 Seconds 250V Temperature Coefficient JIS-C-5202 5.2 Room Temp. Add 100C r 200ppm/C Short Time Overload JIS-C-5202 5.5 2.5 Times RCWV for 5 Seconds r 2.0%+0.05: Insulation Resistance JIS-C-5202 5.6 in V-Block >100M: Pulse Overload 4 Times RCWV 10,000 Cycles JIS-C-5202 5.8 (1 Sec. on , 25 Sec. off ) r 1.0%+0.05: Operating Temp. Range -55C to + 155C Value Range 2.2: To 1K: for E24 Series * Resistance range for standard resistance, below or over this resistance on request. ENVIRONMENTAL CHARACTERISTICS PERFORMANCE TEST TEST METHOD APPRAISE Terminal Strength JIS-C-5202 6.1 Direct load for 10 Sec. in the Direction of the Terminal Leads t2.5kg (24.5N) Resistance to Soldering Heat JIS-C-5202 6.4 350C r 10C for 3 r 0.5 Seconds r 1.0%+0.05: Solderability JIS-C-5202 6.5 235C r 5C for 5 r 0.5 Seconds 95% Min. Coverage Resistance to Solvent JIS-C-5202 6.9 IPA for 1 Min. with Ultrasonic No Deterioration of Coatings and Markings Temperature Cycling JIS-C-5202 7.4 -55C Room Temp. +155C Room Temp. for 5 Cycles r 2.0%+0.05: Humidity JIS-C-5202 7.5 40r 2C, 90~95% RH for 1,000 Hrs. r 5.0%+0.05: Load Life in Humidity JIS-C-5202 7.9 40r 2C, 90~95% RH at RCW V for 1,000 Hrs. (1.5 Hrs. on , 0.5 Hrs. off ) r 5.0%+0.05: Load Life JIS-C-5202 7.10 70C at RCW V for 1,000 Hrs. (1.5 Hrs. on, 0.5 Hrs. off ) r 5.0%+0.05: Overload Flame Retardant JIS-C-5202 7.12 4 Times RCW V for 1 minute No evidence of flaming or arcing * Rated Continuous Working Voltage (RCW V)= Power Rating x Resistance Value YAGEO CORPORATION LEADED RESISTORS Fusible Type Metal Film Resistors Miniature Style [ FRM Series ] FEATURES Power Rating : 1/2W, 1W, 2W, 3W Resistance tolerance : r 5% FlameProof Silicone Coating : UL94V-0 Pink body color The 5th color band is white to represent fusible resistors POWER DERATING CURVE For resistors operated in ambient temperatures above 70C , power rating must be derated in accordance with the curve below. Rated Load (%) 70C 100 80 60 40 20 20 40 60 80 100 120 140 160 180 Ambient Temperature (C) FUSING CHARACTERISTICS Fusing time within 30 seconds at 16 times of rated power Fusing residual resistive value at least 100 times rated resistance DIMENSIONS Unit : mm od H L STYLE L oD H od FRM50S 6.3r 0.5 2.4r 0.2 28r 2.0 0.6r 0.05 FRM1WS 9.0r 0.5 3.3r 0.3 26r 2.0 0.6r 0.05 FRM2WS 11.5r 1.0 4.5r 0.5 35r 2.0 0.8r 0.05 FRM3WS 15.5r 1.0 5.0r 0.5 33r 2.0 0.8r 0.05 oD Note : ELECTRICAL CHARACTERISTICS PERFORMANCE STYLE TEST METHOD Power Rating at 70C FRM50S FRM1WS FRM2WS FRM3WS 1/2W 1W 2W 3W 250V 350V 350V Dielectric Withstanding Voltage JIS-C-5202 5.7 in V-Block for 60 Seconds 250V Temperature Coefficient JIS-C-5202 5.2 Room Temp. Add 100C r 200ppm/C Short Time Overload JIS-C-5202 5.5 2.5 Times RCWV for 5 Seconds r 2.0%+0.05: Insulation Resistance JIS-C-5202 5.6 in V-Block >100M: Pulse Overload 4 Times RCWV 10,000 Cycles JIS-C-5202 5.8 (1 Sec. on , 25 Sec. off ) r 2.0%+0.05: Operating Temp. Range -55C to + 155C Value Range 2.2: To 1K: for E24 Series * Resistance range for standard resistance, below or over this resistance on request. ENVIRONMENTAL CHARACTERISTICS PERFORMANCE TEST TEST METHOD APPRAISE Terminal Strength JIS-C-5202 6.1 Direct load for 10 Sec. in the Direction of the Terminal Leads t2.5kg (24.5N) Resistance to Soldering Heat JIS-C-5202 6.4 350C r 10C for 3 r 0.5 Seconds r 1.0%+0.05: Solderability JIS-C-5202 6.5 235C r 5C for 5 r 0.5 Seconds 95% Min. Coverage Resistance to Solvent JIS-C-5202 6.9 IPA for 1 Min. with Ultrasonic No Deterioration of Coatings and Markings Temperature Cycling JIS-C-5202 7.4 -55C Room Temp. +155C Room Temp. for 5 Cycles r 2.0%+0.05: Humidity JIS-C-5202 7.5 40r 2C, 90~95% RH for 1,000 Hrs. r 5.0%+0.05: Load Life in Humidity JIS-C-5202 7.9 40r 2C, 90~95% RH at RCW V for 1,000 Hrs. (1.5 Hrs. on , 0.5 Hrs. off ) r 5.0%+0.05: Load Life JIS-C-5202 7.10 70C at RCW V for 1,000 Hrs. (1.5 Hrs. on, 0.5 Hrs. off ) r 5.0%+0.05: Overload Flame Retardant JIS-C-5202 7.12 4 Times RCW V for 1 minute No evidence of flaming or arcing * Rated Continuous Working Voltage (RCW V)= Power Rating x Resistance Value YAGEO CORPORATION LEADED RESISTORS AXIAL LEAD TYPE Cement Resistors Standard Type[SQP Series], Non-Inductive Type[NSP Series] FEATURES Exceptionally Small and Sturdy; Mechanically Safe. Excellent Electrical Characteristics Resistance Tolerance: r 5% Applicable Specifications: EIA RS-344 and EIA RC-649 DERATING CURVE Rated Load (%) INTRODUCTION 25 40 70 100 155 275 2W 3W-5W 7W-10W 80 * The materials used and the construction techniques ensure excellent flame resistance, 60 arc resistance and moisture resistances as 40 well as self-extinguishing capabilities. They 20 15W-20W will withstand the most rigorous loading test 0 -50 0 50 100 150 Ambient Temperature (C) 200 250 300 * As resistors in radio and television receivers, the hazardous conditions of smoking and redheat can be completely prevented by the TEMPERATURE RISE proper choice of power resistors Temperature Rise (C) 20W 15W 10W 7W 5W 250 200 150 3W 2W 100 50 0 0 20 40 60 80 100 120 Rated Load (%) DIMENSIONS 38r3. L Unit : mm 38r3. W H od STYLE L W H od SQP200 18r 1.0 6.5r 1.0 6.5r 1.0 0.8r 0.05 SQP300 22r 1.5 8.0r 1.0 8.0r 1.0 0.8r 0.05 SQP500 22r 1.5 9.5r 1.0 9.0r 1.0 0.8r 0.05 SQP700 35r 1.5 9.5r 1.0 9.0r 1.0 0.8r 0.05 SQP10A 48r 1.5 9.5r 1.0 9.0r 1.0 0.8r 0.05 SQP15A 48r 1.5 12.5r 1.5 12.5r 1.5 1.0r 0.05 SQP20A 60r 2.0 12.5r 1.5 12.5r 1.5 1.0r 0.05 Note : ELECTRICAL CHARACTERISTICS STYLE SQP200 SQP300 SQP500 SQP700 SQP10A SQP15A SQP20A Power Rating 2W 3W 5W 7W 10W 15W 20W Operating Temp. Range -55C to +155C Maximum Working Voltage 250V 350V 350V 500V 500V 500V 500V Maximum Overload Voltage 500V 700V 700V 1000V 1000V 1000V 1000V Dielectric Withstanding Voltage 500V 700V 700V 1000V 1000V 1000V 1000V Value Range r 5% (Wirewound) 0.15:~100: 0.3:~120: 0.3:~180: 0.5:~220: 1:~270: Value Range r 5% (Metal Oxide Film) 110:~10K: 130:~22K: 200:~33K: 240:~10K: 300:~10K: Temperature Coefficient r 300ppm/C * 1. Standard resistance is as the above list, below or over this resistance on request. * 2. Non-Inductive type up to 50: only. ENVIRONMENTAL CHARACTERISTICS PERFORMANCE TEST TEST METHOD APPRAISE Short Time Overload JIS-C-5202 5.5 2.5 Times RCW V for 5 Seconds r (2%+0.05:) Dielectric Withstanding Voltage JIS-C-5202 5.7 in V-Block for 60 Seconds by Type Temperature Coefficient of Resistance JIS-C-5202 5.2 -55C to +155C r 300ppm/C Insulation Resistance JIS-C-5202 5.6 in V-Block >100M: Solderability JIS-C-5202 6.5 235C for 5r 0.5 Seconds 95% Min. Coverage Resistance to Solvent JIS-C-5202 6.9 IPA for 1 Min. with Ultrasonic No Deterioration of Coatings and Markings Terminal Strength Direct Load for 10 Sec. in The Direction of The Terminal Leads t2.5kg (24.5N) Pulse Overload JIS-C-5202 5.8 4 Times RCW V 10000 Cycles (1 Sec. on , 25 Sec. off) r (2%+0.05:) Load Life in Humidity JIS-C-5202 7.9 40r 2C, 90~95% RH at RCW V for 1000 Hrs. (1.5 Hrs. on , 0.5 Hrs. off ) r (5%+0.05:) Load Life JIS-C-5202 7.10 70C at RCW V for 1000 Hrs. (1.5 Hrs. on , 0.5 Hrs. off) r (5%+0.05:) Temperature Cycling JIS-C-5202 7.4 -55C Room Temp. +155C Room Temp. for 5 Cycles r (2%+0.05:) Resistance to Soldering Heat JIS-C-5202 6.4 350Cr 10C for 3r 0.5 Seconds r (1%+0.05:) * Rated Continuous Working Voltage (RCW V)= Power Rating x Resistance Value YAGEO CORPORATION LEADED RESISTORS Cement Resistors VERTICAL LEAD TYPE Standard Type[SQM Series], Non-Inductive Type[NSM Series] FEATURES Space Saving Stand-Off Type Small Size, High Power Capacity Resistance Tolerance: r 5% Completely Unflamable DERATING CURVE Rated Load (%) INTRODUCTION 40 70 100 155 275 2W 3W-5W 7W-10W 80 * The materials used and the construction 60 techniques ensure excellent flame resistance, arc resistance and moisture resistances as 40 well as self-extinguishing capabilities. They 20 will withstand the most rigorous loading test 0 -50 0 50 100 150 Ambient Temperature (C) 200 250 300 * As resistors in radio and television receivers, the hazardous conditions of smoking and redheat can be completely prevented by the TEMPERATURE RISE proper choice of power resistors Temperature Rise (C) 250 10W 200 7W 5W 150 3W 100 2W 50 0 0 20 40 60 80 100 Rated Load (%) 120 DIMENSIONS Unit : mm W S 3.5r1 H L 7.5+2 -1 5+2-1 STYLE H W S SQM200 20r 1.5 11.0r 1.0 7.0r 1.0 SQM300 25r 1.5 12.0r 1.0 8.0r 1.0 SQM500 25r 1.5 13.0r 1.0 9.0r 1.0 SQM700 39r 1.5 13.0r 1.0 9.0r 1.0 SQM10A 35r 1.5 16.0r 1.0 12.0r 1.0 O0.8r0.05 (10WS) Note : ELECTRICAL CHARACTERISTICS STYLE SQM200 SQM300 SQM500 SQM700 SQM10A Power Rating 2W 3W 5W 7W 10W Operating Temp. Range -55C to +155C Maximum Working Voltage 250V 350V 350V 500V 500V Maximum Overload Voltage 500V 700V 700V 1000V 1000V Dielectric Withstanding Voltage 500V 700V 700V 1000V 1000V Value Range r 5% (Ceramic Core) 0.15:~100: 0.24:~120: 0.3:~180: 0.51:~220: 1:~270: Value Range r 5% (Metal Oxide Film) 110:~10K: 130:~22K: 200:~33K: 240:~10K: 300:~10K: Temperature Coefficient r 300ppm/C * 1. Standard resistance is as the above list, below or over this resistance on request. * 2. Non-Inductive type up to 50: only. ENVIRONMENTAL CHARACTERISTICS PERFORMANCE TEST TEST METHOD APPRAISE Short Time Overload JIS-C-5202 5.5 2.5 Times RCW V for 5 Seconds r (2%+0.05:) Dielectric Withstanding Voltage JIS-C-5202 5.7 in V-Block for 60 Seconds by Type Temperature Coefficient of Resistance JIS-C-5202 5.2 -55C to +155C r 300ppm/C Insulation Resistance JIS-C-5202 5.6 in V-Block >100M: Solderability JIS-C-5202 6.5 235C for 5r 0.5 Seconds 95% Min. Coverage Resistance to Solvent JIS-C-5202 6.9 IPA for 1 Min. with Ultrasonic No Deterioration of Coatings and Markings Terminal Strength Direct Load for 10 Sec. in The Direction of The Terminal Leads t2.5kg (24.5N) Pulse Overload JIS-C-5202 5.8 4 Times RCW V 10000 Cycles (1 Sec. on , 25 Sec. off) r (2%+0.05:) Load Life in Humidity JIS-C-5202 7.9 40r 2C, 90~95% RH at RCW V for 1000 Hrs. (1.5 Hrs. on , 0.5 Hrs. off ) r (5%+0.05:) Load Life JIS-C-5202 7.10 70C at RCW V for 1000 Hrs. (1.5 Hrs. on , 0.5 Hrs. off) r (5%+0.05:) Temperature Cycling JIS-C-5202 7.4 -55C Room Temp. +155C Room Temp. for 5 Cycles r (2%+0.05:) Resistance to Soldering Heat JIS-C-5202 6.4 350Cr 10C for 3r 0.5 Seconds r (1%+0.05:) * Rated Continuous Working Voltage (RCW V)= Power Rating x Resistance Value YAGEO CORPORATION LEADED RESISTORS RADIAL TERMINALS TYPE Cement Resistors Standard Type[SQZ Series], Non-Inductive Type[NSZ Series] FEATURES Space Saving Stand-Off Type Resistance Tolerance: r 5% Completely Unflamable DERATING CURVE Rated Load (%) INTRODUCTION 40 70 100 155 275 2W 5W-10W 80 * The materials used and the construction 60 techniques ensure excellent flame resistance 40 arc resistance and moisture resistances as 15W-20W 20 well as self-extinguishing capabilities. They will withstand the most rigorous loading test 0 -50 0 50 100 150 Ambient Temperature (C) 200 250 300 * As resistors in radio and television receivers, the hazardous conditions of smoking and redheat can be completely prevented by the TEMPERATURE RISE proper choice of power resistors Temperature Rise (C) 20W 15W 10W 7W 5W 250 200 150 3W 100 50 0 0 20 40 60 80 100 Rated Load (%) 120 DIMENSIONS Unit : mm P4 P3 S H1 P1 H2 0.5 L P2 W H STYLE L SQZ300 H W S H1 H2 P1 P2 P3 P4 24.0r1.5 9.0r1 9.0r1 12.5r1 24.0r1 9.5r1.0 4.0r 0.2 2.0r0.2 5.0r0.2 1.4r0.1 SQZ500 27.0r1.5 9.5r1 9.5r1 15.0r1 24.0r1 9.5r1.0 4.0r 0.2 2.0r0.2 5.0r0.2 1.4r0.1 SQZ700 35.0r1.5 9.5r1 9.5r1 22.5r1 24.0r1 9.5r1.0 4.0r 0.2 2.0r0.2 5.0r0.2 1.4r0.1 SQZ10A 48.0r1.5 9.5r1 9.5r1 32.5r1 24.0r1 9.5r1.0 4.0r 0.2 2.0r0.2 5.0r0.2 1.4r0.1 SQZ15A 48.0r1.5 12.5r1 12.5r 1 35.0r1 34.5r1 15.0r1.5 7.0r 0.2 6.0r0.2 10.0r0.2 2.7r0.1 SQZ20A 63.5r2.0 12.5r1 12.5r 1 50.0r1 34.5r1 15.0r1.5 7.0r 0.2 6.0r0.2 10.0r0.2 2.7r0.1 Note : ELECTRICAL CHARACTERISTICS STYLE SQZ300 SQZ500 SQZ700 SQZ10A SQZ15A SQZ20A Power Rating 3W 5W 7W 10W 15W 20W Operating Temp. Range -55C to +155C Maximum Working Voltage 250V 350V 500V 500V 500V 500V Maximum Overload Voltage 500V 700V 1000V 1000V 1000V 1000V Dielectric Withstanding Voltage 500V 700V 1000V 1000V 1000V 1000V Value Range r 5% (Ceramic Core) 0.22:~120: 0.47:~180: 0.68:~220: 1:~270: Value Range r 5% (Metal Oxide Film) 130:~22K: 200:~33K: 240:~10K: 300:~10K: Temperature Coefficient r 300ppm/C * 1. Standard resistance is as the above list, below or over this resistance on request. * 2. Non-Inductive type up to 50: only. ENVIRONMENTAL CHARACTERISTICS PERFORMANCE TEST TEST METHOD APPRAISE Short Time Overload JIS-C-5202 5.5 2.5 Times RCW V for 5 Seconds r (2%+0.05:) Dielectric Withstanding Voltage JIS-C-5202 5.7 in V-Block for 60 Seconds by Type Temperature Coefficient of Resistance JIS-C-5202 5.2 -55C to +155C r 300ppm/C Insulation Resistance JIS-C-5202 5.6 in V-Block >100M: Solderability JIS-C-5202 6.5 235C for 5r 0.5 Seconds 95% Min. Coverage Resistance to Solvent JIS-C-5202 6.9 IPA for 1 Min. with Ultrasonic No Deterioration of Coatings and Markings Terminal Strength Direct Load for 10 Sec. in The Direction of The Terminal Leads t2.5kg (24.5N) Pulse Overload JIS-C-5202 5.8 4 Times RCW V 10000 Cycles (1 Sec. on , 25 Sec. off) r (2%+0.05:) Load Life in Humidity JIS-C-5202 7.9 40r 2C, 90~95% RH at RCW V for 1000 Hrs. (1.5 Hrs. on , 0.5 Hrs. off ) r (5%+0.05:) Load Life JIS-C-5202 7.10 70C at RCW V for 1000 Hrs. (1.5 Hrs. on , 0.5 Hrs. off) r (5%+0.05:) Temperature Cycling JIS-C-5202 7.4 -55C Room Temp. +155C Room Temp. for 5 Cycles r (2%+0.05:) Resistance to Soldering Heat JIS-C-5202 6.4 350Cr 10C for 3r 0.5 Seconds r (1%+0.05:) * Rated Continuous Working Voltage (RCW V)= Power Rating x Resistance Value YAGEO CORPORATION LEADED RESISTORS CLAMP MOUNTING TYPE Cement Resistors Standard Type[SQH Series], Non-Inductive Type[NSH Series] FEATURES Low Cost Small Size, High Power Capacity Resistance Tolerance: r 5%, r 10% Completely Unflamable DERATING CURVE Rated Load (%) 25 40 70 100 155 275 10W 80 60 40 15W-40W DIMENSIONS 20 0 -50 0 50 100 150 200 Ambient Temperature (C) 250 300 P2 P3 W SQH1 Type P4 P1 d Temperature Rise (C) 0.5 6 o0.25 H2 2.2 H1 S 0.7 TEMPERATURE RISE 250 40W 30W 20W, 25W 200 10W, 15W 150 100 L 50 0 SQH2 Type H1 0 20 40 60 80 100 Rated Load (%) 120 W H Unit : mm L H W S H1 H2 P1 P2 P3 P4 SQH10A 48.0r 1.5 10.5r 1.0 10.5r 1 33.0r2 19.5r 1.0 4.0 11.0r 0.2 6.0 8.0 3.0 SQH15A 48.0r 1.5 12.5r 1.0 12.0r 1 33.0r2 20.5r 1.0 4.0 11.0r 0.2 6.0 8.0 3.0 SQH20A 63.5r 2.0 12.5r 1.0 12.5r 1 48.0r2 20.5r 1.0 4.0 11.0r 0.2 6.0 8.0 3.0 SQH25A 63.5r 2.0 16.0r 1.0 16.0r 1 46.0r2 28.0r 1.5 4.2 11.0r 0.2 6.0 10.0 3.0 SQH30A 70.0r 2.0 19.0r 1.5 18.0r 1 56.0r2 28.0r 1.5 4.2 18.0r 0.2 8.0 10.0 3.0 SQH40A 90.0r 2.5 19.0r 1.5 18.0r 1 71.0r2 28.0r 1.5 4.2 18.0r 0.2 8.0 10.0 3.0 P1 P4 2.2 S L STYLE P2 d o0.25 Note : ELECTRICAL CHARACTERISTICS STYLE SQH10A SQH15A SQH20A SQH25A SQH30A SQH40A Power Rating 10W 15W 20W 25W 30W 40W Operating Temp. Range -55C to +155C Maximum Working Voltage 250V 350V 500V 500V 500V 500V Maximum Overload Voltage 500V 700V 1000V 1000V 1000V 1000V Dielectric Withstanding Voltage 1000V 1000V 1000V 1000V 1000V 1000V Value Range r 5% (Ceramic Core) 0.39:~270: 0.39:~300: 0.51:~300: 0.51:~1K: 0.62:~1K: 0.62:~1K: Value Range r 5% (Metal Oxide Film) 300:~10K: 330:~10K: Temperature Coefficient r 300ppm/C * 1. Standard resistance is as the above list, below or over this resistance on request. * 2. Non-Inductive type up to 50: only. ENVIRONMENTAL CHARACTERISTICS PERFORMANCE TEST TEST METHOD APPRAISE Short Time Overload JIS-C-5202 5.5 2.5 Times RCW V for 5 Seconds r (2%+0.05:) Dielectric Withstanding Voltage JIS-C-5202 5.7 in V-Block for 60 Seconds by Type Temperature Coefficient of Resistance JIS-C-5202 5.2 -55C to +155C r 300ppm/C Insulation Resistance JIS-C-5202 5.6 in V-Block >100M: Solderability JIS-C-5202 6.5 235C for 5r 0.5 Seconds 95% Min. Coverage Resistance to Solvent JIS-C-5202 6.9 IPA for 1 Min. with Ultrasonic No Deterioration of Coatings and Markings Terminal Strength Direct Load for 10 Sec. in The Direction of The Terminal Leads t2.5kg (24.5N) Pulse Overload JIS-C-5202 5.8 4 Times RCW V 10000 Cycles (1 Sec. on , 25 Sec. off) r (2%+0.05:) Load Life in Humidity JIS-C-5202 7.9 40r 2C, 90~95% RH at RCW V for 1000 Hrs. (1.5 Hrs. on , 0.5 Hrs. off ) r (5%+0.05:) Load Life JIS-C-5202 7.10 70C at RCW V for 1000 Hrs. (1.5 Hrs. on , 0.5 Hrs. off) r (5%+0.05:) Temperature Cycling JIS-C-5202 7.4 -55C Room Temp. +155C Room Temp. for 5 Cycles r (2%+0.05:) Resistance to Soldering Heat JIS-C-5202 6.4 350Cr 10C for 3r 0.5 Seconds r (1%+0.05:) * Rated Continuous Working Voltage (RCW V)= Power Rating x Resistance Value Note : PACKING METHODS 0.8 Max. Displacement between any Two Resistors Bandolier for Axial Leads The resistors are supplied on bandolier; either 1000 resistors in ammopack or 5000 resistors on reel. +1.6 0 -0 1Max. Sr0.1 B1 a B2 A STYLE DIMENSIONS Normal Miniature a A B1-B2 S (Spacing) TYPE-12 TYPE25S 6r 0.5 1.2 5 TYPE-25 TYPE50S 6r 0.5 52.4r 1.5 26.0r 1.5 52.4r 1.5 1.2 5 26.0r 1.5 52.4r 1.5 73.0r 1.5 52.4r 1.5 73.0r 1.5 52.4r 1.5 91.0r 1.5 1.0 1.2 1.5 5 5 1.5 10 1.5 10 TYPE-50 TYPE100 TYPE1WS TYPE2WS 6r 0.5 6r 0.5 TYPE200 KNP300 RSF300 TYPE3WS KNP5WS RSF5WS 6r 0.5 RSF500/KNP500 KNP7WS 6r 0.5 Bandoliers can be reeled; dimension a differ with type. TAPE ON BOX PACKING (4) C (1) 300mm Leader at Beginning and End (2) (3) Paper (4) Flange a cardboard box ("ammopack"). 15 51 305 (5) TAPE ON REEL A 22.5 "Ammopack" is an abbreviation of "ammunition packing" The dimensions of A-B-C vary with type and quantity. (5) Cylinder STYLE Bandoliers may also be supplied in B (1) Resistor (2) Bandolier (3) 1mm Per 10 Spacings, 0.5mm Per 5 Spacings 73.0r 1.5 TAPE ON REEL PACKING 2230'(16X) T (Max. Deviation of Spacing) Unit : mm 3 A TAPE ON BOX Miniature Across Flange (A) TYPE-12 TYPE25S 72 5,000 78/81 24/70 260 2,000/5,000 TYPE-25 TYPE50S 48/72 5,000 78/81 24/104 260 1,000/5,000 TYPE-50 TYPE1WS 72 2,500 73 45 258 1,000 TYPE100 TYPE2WS 95 2,000 103 78 260 1,000 TYPE200 TYPE3WS 95 1,000 103 94 260 1,000 KNP300 KNP5WS 95 1,000 103 78 260 500 95 250 116 79 255 250 RSF300/500 KNP500 RSF5WS/KNP7WS QTY Per Reel W( A) H (B) Unit : mm/pcs Normal L (C) QTY Per Box Note : SPECIAL TYPE (FORMING DIMENSIONS) M TYPE oD L H od P 0-3.0 STYLE DIMENSIONS Normal Miniature L P oD od H TYPE-12 TYPE25S 3.4r 0.3 6.0r 1 1.9r 0.2 0.5r 0.05 10.0r 1 TYPE-25 TYPE 50S 6.3r 0.5 10.0r 1 2.4r 0.2 0.6r 0.05 10.0r 1 TYPE-50 TYPE1WS 9.0r 0.5 12.5r 1 3.3r 0.3 0.6r 0.05 10.0r 1 TYPE100 TYPE2WS 11.5r 1.0 15.0r 1 4.5r 0.5 0.8r 0.05 12.5r 1 TYPE200 TYPE3WS 15.5r 1.0 20.0r 1 5.0r 0.5 0.8r 0.05 15.0r 1 Unit : mm MB TYPE oD L H1 t od H2 P 0-3.0 STYLE DIMENSIONS Unit : mm Normal Miniature L P oD od H1 H2 t TYPE-25 TYPE50S 6.3r 0.5 10.0r 1 2.4r 0.2 0.6r 0.05 6.0r 1 5.0r 1 1.2r 0.2 TYPE-50 - 9.0r 0.5 12.5r 1 3.3r 0.3 0.6r 0.05 6.0r 1 5.0r 1 1.2r 0.2 - TYPE1WS 9.0r 0.5 12.5r 1 3.3r 0.3 0.8r 0.05 6.0r 1 5.0r 1 1.4r 0.2 TYPE100 TYPE2WS 11.5r 1.0 15.0r 1 4.5r 0.5 0.8r 0.05 6.0r 1 5.0r 1 1.4r 0.2 TYPE200 TYPE3WS 15.5r 1.0 20.0r 1 5.0r 0.5 0.8r 0.05 10.0r 1 5.0r 1 1.4r 0.2 TYPE300 TYPE5WS 24.5r 1.0 30.0r 1 8.0r 0.5 0.8r 0.05 15.0r 1 5.0r 1 1.4r 0.2 TYPE500 - 24.5r 1.0 30.0r 1 8.0r 0.5 0.8r 0.05 15.0r 1 5.0r 1 1.4r 0.2 Note : MR TYPE oD L H1 od H2 F P 0-3.0 STYLE DIMENSIONS Normal Miniature L P F oD od H1 H2 TYPE-50 TYPE1WS 9.0r 0.5 14.5r 1 7.0r 0.5 3.3r 0.3 0.6r 0.05 7.0r 1 5.0r 1 TYPE100 TYPE2WS 11.5r 1.0 17.5r 1 7.0r 0.5 4.5r 0.5 0.8r 0.05 8.0r 1 5.0r 1 TYPE200 TYPE3WS 15.5r 1.0 21.5r 1 7.0r 0.5 5.0r 0.5 0.8r 0.05 9.0r 1 5.0r 1 Unit : mm FFK TYPE FK TYPE F TYPE oD oD E E E L L L H1 oD oD E L FKK TYPE H h h1 H H h od P h od od P od P P STYLE DIMENSIONS Normal Miniature L P oD od h H Max. h1 H1Max. E Max. TYPE100 TYPE2WS 11.5r 1 6r 1 4.5r 0.5 0.8r 0.05 10.0r 1 25 5.0r 1 20 3.5 TYPE200 TYPE3WS 15.5r 1 6r 1 5.0r 0.5 0.8r 0.05 10.0r 1 30 5.0r 1 25 3.5 *TYPE-25/50S is available. Unit : mm Note : FT Type Forming for Taping Rated Watts 1/4W & 1/2WS MT Type Forming for Taping Rated Watts 1/6W & 1/4WS Body Dimension : L = 6.3r 0.5mm oD = 2.4r 0.2mm Rated Watts : 1/2W & 1WS Body Dimension : L = 9r 0.5mm oD = 3.3r 0.3mm Body Dimension : L = 3.4r 0.3mm oD = 1.9r 0.2mm 12.7r0.5 12.7r0.3 6.35r1.0 +0.4 -0.2 16.0+1.0 -0 5.0 20.0+0.5 -0 5.0r0.5 18.0+1.0 -0.5 18.0+1.0 -0.5 5.0r0.5 1 Max. 12.7r0.3 12.7r0.3 0.45 or 0.5 4.0r0.3 4.0r0.3 PN Type Forming for Taping AV Type Forming for Taping Rated Watts 1/4W & 1/2WS Body Dimension : L = 6.3r 0.5mm oD = 2.4r 0.2mm Rated Watts 1/4W & 1/2WS Body Dimension : L = 6.3r 0.5mm oD = 2.4r 0.2mm Rated Watts : 1/2W & 1WS Body Dimension : L = 9r 0.5mm oD = 3.3r 0.3mm Rated Watts : 1/2W & 1WS Body Dimension : L = 9r 0.5mm oD = 3.3r 0.3mm 12.7r0.5 18.0+1.0 -0.5 5.0r0.5 18.0+1.0 -0.5 5.0r0.5 16.0+1.0 -0 16.0+1.0 -0 12.7r0.5 1 Max. 12.7r0.3 1 Max. 4.0r0.3 12.7r0.3 4.0r0.3 Note : EXPLANATIONS OF ORDERING CODE For Leaded Resistor Explanations of Ordering Code MFR -12 F T F 52- Code 8 Packing Style T = Tape on Box Packing R = Paper Tape Reel B = Bulk Packing Code 1~3 Series Name See Index Code 4~6 Power Rating See Following Table Code 7 Resistance Tolerance B = r 0.1% C = r 0.25% D = r 0.5% F = r 1% G = r 2% J = r 5% K = r 10% Code 9 Temperature Coefficient of Resistance A = r 5ppm/C G = r 200ppm/c B = r 10ppm/C H = r 250ppm/c C = r 15ppm/C I = r 300ppm/c D = r 25ppm/C J = r 350ppm/c - = Base on Spec. E = r 50ppm/C F = r 100ppm/C CODE 4~6 CODE 10~11 Power Rating Special Type Code 10~11 Special Type See Following Table 100R Code 12~23 Resistance Value for Example 0R1 1K 1R 10K 10R 100K 100R 1M 10M -12=1/6W 3WM=3WM 900=9W 90A=90W 26- =26mm FKK=FKK-Type Forming for Bulk -25=1/4W 400=4W 10A=10W 10B=100W 52- =52.4mm PN=PANAsert for Taping 25S=1/4WS 4WS=4WS 10S=10WS 15B=150W 73- =73mm AV=AVIsert for Taping -50=1/2W 500=5W 15A=15W 20B=200W 81- =81mm MT=M-Type Forming for Taping 50S=1/2WS 5WS=5WS 20A=20W 10C=1000W 91- =91mm FT=F-Type Forming for Taping 100=1W 5SS=5SS 30A=30W 204=0.4W M=M-Type Forming for Bulk 1WS=1WS 600=6W 40A=40W 207=0.6W MB=MB-Type Forming for Bulk 200=2W 6WS=6WS 50A=50W MR=MR-Type Forming for Bulk 2WS=2WS 700=7W 60A=60W F=F-Type Forming for Bulk 300=3W 7WS=7WS 70A=70W FK=FK-Type Forming for Bulk 3WS=3WS 800=8W 80A=80W FFK=FFK-Type Forming for Bulk 4-BAND-CODE 2%, 5%, 10% 560K:r5% COLOR 1ST BAND 2ND BAND 3RD BAND BLACK BROWN 0 1 0 1 0 1 MUL TIPLIER 1: 10: r1% (F) RED ORANGE YELLOW 2 3 4 2 3 4 2 3 4 100: 1K: 10K: r2% (G) GREEN 5 5 5 100K: r0.5% (D) BLUE 6 6 6 1M: r0.25% (C) VIOLET GREY 7 8 7 8 7 8 10M: r0.10% r0.05% (B) WHITE GOLD SILVER 9 9 9 0.1 0.01 r5% r10% (J) (K) 0.1%, 0.25%, 0.5%, 1% TOLERANCE 237:r1% 5-BAND-CODE STANDARD RESISTANCE VALUES FOR THE 10-TO-100 DECADE (Also Usable in Decade Multiples or Sub-Multiples) RESISTANCE TOLERANCE (r%) 0.1% 0.25% 0.5% 1% 2% 5% 10% 0.1% 0.25% 0.5% 1% 2% 5% 10% 0.1% 0.25% 0.5% 1% 2% 5% 10% 0.1% 0.25% 0.5% 1% 2% 5% 10% 0.1% 0.25% 0.5% 1% 2% 5% 10% 0.1% 0.25% 0.5% 1% 2% 5% 10% 10.0 10.1 10.2 10.4 10.5 10.6 10.7 10.9 11.0 11.1 11.3 11.4 11.5 11.7 11.8 12.0 12.1 12.3 12.4 12.6 12.7 12.9 13.0 13.2 13.3 13.5 13.7 13.8 14.0 14.2 14.3 14.5 E-192 10.0 - 10.2 - 10.5 - 10.7 - 11.0 - 11.3 - 11.5 - 11.8 - 12.1 - 12.4 - 12.7 - 13.0 - 13.3 - 13.7 - 14.0 - 14.3 - E-96 10 - - - - - - - 11 - - - - - - 12 - - - - - - 13 - - - - - - - - - E-24 14.7 14.9 15.0 15.2 15.4 15.6 15.8 16.0 16.2 16.4 16.5 16.7 16.9 17.2 17.4 17.6 17.8 18.0 18.2 18.4 18.7 18.9 19.1 19.3 19.6 19.8 20.0 20.3 20.5 20.8 21.0 21.3 E-192 14.7 - 15.0 - 15.4 - 15.8 - 16.2 - 16.5 - 16.9 - 17.4 - 17.8 - 18.2 - 18.7 - 19.1 - 19.6 - 20.0 - 20.5 - 21.0 - E-96 - - 15 - - - - 16 - - - - - - - - - 18 - - - - - - - - 20 - - - - - E-24 21.5 21.8 22.1 22.3 22.6 22.9 23.2 23.4 23.7 24.0 24.3 24.6 24.9 25.2 25.5 25.8 26.1 26.4 26.7 27.1 27.4 27.7 28.0 28.4 28.7 29.1 29.4 29.8 30.1 30.5 30.9 31.2 E-192 21.5 - 22.1 - 22.6 - 23.2 - 23.7 - 24.3 - 24.9 - 25.5 - 26.1 - 26.7 - 27.4 - 28.0 - 28.7 - 29.4 - 30.1 - 30.9 - E-96 - - 22 - - - - - - 24 - - - - - - - - - 27 - - - - - - - - 30 - - - E-24 31.6 32.0 32.4 32.8 33.2 33.6 34.0 34.4 34.8 35.2 35.7 36.1 36.5 37.0 37.4 37.9 38.3 38.8 39.2 39.7 40.2 40.7 41.2 41.7 42.2 42.7 43.2 43.7 44.2 44.8 45.3 45.9 E-192 31.6 - 32.4 - 33.2 - 34.0 - 34.8 - 35.7 - 36.5 - 37.4 - 38.3 - 39.2 - 40.2 - 41.2 - 42.2 - 43.2 - 44.2 - 45.3 - E-96 - - - - 33 - - - - - - 36 - - - - - - 39 - - - - - - - 43 - - - - - E-24 46.4 47.0 47.5 48.1 48.7 49.3 49.9 50.5 51.1 51.7 52.3 53.0 53.6 54.2 54.9 55.6 56.2 56.9 57.6 58.3 59.0 59.7 60.4 61.2 61.9 62.6 63.4 64.2 64.9 65.7 66.5 67.3 E-192 46.4 - 47.5 - 48.7 - 49.9 - 51.1 - 52.3 - 53.6 - 54.9 - 56.2 - 57.6 - 59.0 - 60.4 - 61.9 - 63.4 - 64.9 - 66.5 - E-96 - 47 - - - - - - 51 - - - - - - - 56 - - - - - - - 62 - - - - - - - E-24 68.1 69.0 69.8 70.6 71.5 72.3 73.2 74.1 75.0 75.9 76.8 77.7 78.7 79.6 80.6 81.6 82.5 83.5 84.5 85.6 86.6 87.6 88.7 89.8 90.9 92.0 93.1 94.2 95.3 96.5 97.6 98.8 E-192 68.1 - 69.8 - 71.5 - 73.2 - 75.0 - 76.8 - 78.7 - 80.6 - 82.5 - 84.5 - 86.6 - 88.7 - 90.9 - 93.1 - 95.3 - 97.6 - E-96 68 - - - - - - - 75 - - - - - - - 82 - - - - - - - 91 - - - - - - - E-24