Metal Film Res. [ MFR Series ]
Metal Film Res.-Precision Type [ MFP Series ]
Metal Film Res.-Professional Type [ MF0 Series ]
Metal Film Res.-Flame-Proof Type [ FMF Series ]
Metal Film Res.-Professional & Flame-Proof Type [ FM0 Series ]
Metal Film Res.-Power Flame-Proof Type [ FMP Series ]
Metal Oxide Film Res.-Flame-Proof Type [ RSF Series ]
Carbon Film Res. [ CFR Series ]
Carbon Film Res.-Professional Type [ CF0 Series ]
Carbon Film Res.-Flame-Proof Type [ FCR Series ]
Carbon Film Res.-Professional & Flame-Proof Type [ FC0 Series ]
Carbon Film Res.-Non Inductive Type-Normal Style [ NCR Series ]
Carbon Film Res.-Non-Inductive Type-Miniature Style [ NCR Series ]
Zerohm Res. [ ZOR Series ]
Jumper Wires [JPW Series ]
Wirewound Res. [ KNP Series ]
Wirewound Res.-Non Inductive Type [ NKN Series ]
Metal film Res.-Fusible Type-Normal Style [ FRM Series ]
Metal film Res.-Fusible Type-Miniature Style [ FRM Series ]
Cement Res.-Axial Lead Type [ SQP/NSP Series ]
Cement Res.-Vertical Lead Type [ SQM/NSM Series ]
Cement Res.-Radial Terminals Type [ SQZ/NSZ Series ]
Cement Res.-Clamp Mounting Type [ SQH/NSH Series ]
Packing Methods
Special Type [ Forming Type ]
Explanations of Ordering Code
YAGEO CORPORATION LEADED RESISTORS ISO-9002 CERTIFIED
2
4
6
8
10
12
14
16
18
20
22
24
26
28
29
30
32
34
36
38
40
42
44
50
50
51
INDEX
YAGEO CORPORATION LEADED RESISTORS
Metal Film Resistors MFR Series
Normal & Miniature Style
FEATURES
Power Rating 1/6W, 1/4W, 1/2W, 1W, 2W
Resistance Tolerance r0.1%, r0.25%, r0.5%, r1%
T.C.R. r15ppm/ºC, r25ppm/ºC, r50ppm/ºC, r100ppm/ºC
DIMENSIONS
STYLE DIMENSION
Normal Miniature L øD H ød
MFR-12 MFR25S 3.4r0.3 1.9r0.2 28r2.0 0.5r0.05
MFR-25 MFR50S 6.3r0.5 2.4r0.2 28r2.0 0.6r0.05
MFR-50 MFR1WS 9.0r0.5 3.3r0.3 26r2.0 0.6r0.05
MFR100 MFR2WS 11.5r1.0 4.5r0.5 35r2.0 0.8r0.05
MFR200 – 15.5r1.0 5.0r0.5 33r2.0 0.8r0.05
Unit : mm
INTRODUCTION
The MFR Series Metal Film Resistors are
manufactured using vacuum sputtering system
to deposit multiple layers of mixed metals and
passivative materials onto a carefully treated
high grade ceramic substrate, the resistors are
coated with layers of blue lacquer.
ød
HLøD
DERATING CURVE
Ambient Temperature (ºC)
Rated Load (%)
HOT-SPOT TEMPERATURE
Surface Temp. Rise (ºC)
Applied Load, % of RCWV
MFR2WS
MFR200 MFR1WS
MFR100 MFR50S
MFR-50 MFR25S
MFR-25
MFR-12
0 25 50 75 100
200
150
100
50
Measuring Position
100
80
60
40
20
20 40 60 80 100 120 140 160 180
70ºC
Note :
ELECTRICAL CHARACTERISTICS
STYLE MFR-12 MFR25S MFR-25 MFR50S MFR-50 MFR1WS MFR100 MFR2WS MFR200
Power Rating at 70ºC 1/6W 1/4W 1/2W 1W 2W
Operating Temp. Range -55ºC to +155ºC
Maximum Working Voltage 200V 200V 250V 300V 350V 400V 500V 500V 500V
Maximum Overload Voltage 400V 400V 500V 600V 700V 800V 1000V 1000V 1000V
Dielectric Withstanding Voltage 300V 400V 500V 500V 500V 700V 1000V 1000V 1000V
Value Range r0.5%, r1% 10:~1M:
Value Rang r0.1%, r0.25% 100:~100K:
Temperature Coefficient (by Type) r15ppm/ºC, r25ppm/ºC, r50ppm/ºC, r100ppm/ºC
* Resistance range for standard resistance, below or over this resistance on request.
ENVIRONMENTAL CHARACTERISTICS
PERFORMANCE TEST TEST METHOD APPRAISE
Short Time Overload JIS-C-5202 5.5 2.5 Times RCW V for 5 Seconds r(0.25%+0.05:)
Dielectric Withstanding Voltage JIS-C-5202 5.7 in V-Block for 60 Seconds by Type
Temperature Coefficient of Resistance JIS-C-5202 5.2 -55ºC to +155ºC by Type
Insulation Resistance JIS-C-5202 5.6 in V-Block >10000M:
Solderability JIS-C-5202 6.5 235ºC for 5r0.5 Seconds 95% Min. Coverage
Resistance to Solvent JIS-C-5202 6.9 IPA for 1 Min. with Ultrasonic No Deterioration of
Coatings and Markings
Terminal Strength Direct load for 10 Sec. in The Direction of The Terminal Leads t2.5kg (24.5N)
Pulse Overload JIS-C-5202 5.8 4 Times RCW V 10000 Cycles (1 Sec. on , 25 Sec. off) r(1%+0.05:)
Load Life in Humidity JIS-C-5202 7.9 40r2ºC, 90~95% RH at RCW V for 1000 Hrs. r(1.5%+0.05:)
(1.5 Hrs. on , 0.5 Hrs. off )
Load Life JIS-C-5202 7.10 70ºC at RCW V for 1000 Hrs. (1.5 Hrs. on , 0.5 Hrs. off) r(1.5%+0.05:)
Temperature Cycling JIS-C-5202 7.4 -55ºC➞Room Temp.➞+155ºC➞Room Temp. for 5 Cycles r(0.75%+0.05:)
Resistance to Soldering Heat JIS-C-5202 6.4 350ºCr10ºC for 3r0.5 Seconds r(0.25%+0.05:)
* Rated Continuous Working Voltage (RCW V)= Power Rating x Resistance Value
YAGEO CORPORATION LEADED RESISTORS
Metal Film Resistors Precision Type
MFP Series
DIMENSIONS
STYLE DIMENSION
Normal Miniature L øD H ød
MFP-12 MFP25S 3.4r0.3 1.9r0.2 28r2.0 0.5r0.05
MFP204 __ 3.4r0.3 1.9r0.2 28r2.0 0.5r0.05
MFP-25 MFP50S 6.3r0.5 2.4r0.2 28r2.0 0.6r0.05
MFP207 __ 6.3r0.5 2.4r0.2 28r2.0 0.6r0.05
Unit : mm
ød
HLøD
FEATURES
Power Rating :1/6W, 1/4W, 0.4W, 1/2W, 0.6W
Resistance Tolerance : r0.1%, r0.25%
T.C.R. : r15ppm/ºC, r25ppm/ºC
High thermal conductivity and specific gravity rods
Epoxy coating
Blue body color
POWER DERATING CURVE
For resistors operated in ambient temperatures above 70ºC , power
rating must be derated in accordance with the curve below.
Ambient Temperature (ºC)
Rated Load (%) 100
80
60
40
20
20 40 60 80 100 120 140 160 180
70ºC
Note :
ELECTRICAL CHARACTERISTICS
PERFORMANCE STYLE TEST METHOD MFP-12 MFP25S MFP204 MFP-25 MFP50S MFP207
Power Rating at 70ºC 1/6W 1/4W 0.4W 1/4W 1/2W 0.6W
Maximum Working Voltage 150V 200V 200V 250V 250V 250V
Maximum Overload Voltage 300V 400V 400V 500V 600V 600V
Dielectric Withstanding Voltage JIS-C-5202 5.7 in V-Block for 60 Seconds 300V 300V 300V 500V 500V 500V
Temperature Coefficient JIS-C-5202 5.2 Room Temp. Add 100ºC r15ppm/ºC, r25ppm/ºC
Short Time Overload JIS-C-5202 5.5 2.5 Times RCWV for 5 Sec. r0.1%+0.05:
Insulation Resistance JIS-C-5202 5.6 in V-Block >10,000M:
Pulse Overload JIS-C-5202 5.8 4 Times RCWV 10,000 Cycles r1.0%+0.05:
(1 Sec. on , 25 Sec. off )
Operating Temp. Range -55ºC to + 155ºC
Value Rang r0.1% 100:~100K 100:~200K:
Value Range r0.25% 50:~200K 50:~301K:
* Resistance range for standard resistance, below or over this resistance on request.
ENVIRONMENTAL CHARACTERISTICS
PERFORMANCE TEST TEST METHOD APPRAISE
Terminal Strength JIS-C-5202 6.1 Direct load for 10 Sec. in the Direction of the Terminal Leads t2.5kg (24.5N)
Resistance to Soldering Heat JIS-C-5202 6.4 350ºC r 10ºC for 3 r 0.5 Seconds r0.20%+0.05:
Solderability JIS-C-5202 6.5 235ºC r 5ºC for 5 r 0.5 Seconds 95% Min. Coverage
Resistance to Solvent JIS-C-5202 6.9 IPA for 1 Min. with Ultrasonic No Deterioration of
Coatings and Markings
Temperature Cycling JIS-C-5202 7.4 -55ºC➞Room Temp.➞+155ºC➞Room Temp. for 5 Cycles r0.25%+0.05:
Humidity JIS-C-5202 7.5 40r2ºC, 90~95% RH for 1,000 Hrs. r0.50%+0.05:
Load Life in Humidity JIS-C-5202 7.9 40r2ºC, 90~95% RH at RCW V for 1,000 Hrs. r1.0%+0.05:
(1.5 Hrs. on , 0.5 Hrs. off )
Load Life JIS-C-5202 7.10 70ºC at RCW V for 1,000 Hrs. (1.5 Hrs. on, 0.5 Hrs. off ) r1.0%+0.05:
* Rated Continuous Working Voltage (RCW V)= Power Rating x Resistance Value
YAGEO CORPORATION LEADED RESISTORS
DIMENSIONS
STYLE L øD H ød
MF0204 3.4r0.3 1.9r0.2 28r2.0 0.5r0.05
MF0207 6.3r0.5 2.4r0.2 28r2.0 0.6r0.05
Metal Film Resistors PROFESSIONAL TYPE
Miniature Style [ MF0 Series ]
FEATURES
DIN 44061, 45921 part 107
CECC 40101-039, 40101-017
MIL 10509F (Char. D & C )
Resistance Tolerance r1%
T.C.R. r50ppm/ºC
Unit : mm
INTRODUCTION
The MF0 Series are manufactured by high
vacuum sputtering deposit metal film on high
thermal conductivity and specific gravity
ROSENTHAL ceramic or same grade rods.
The resistors are coated with multilayers of
blue color lacquer.
ød
HLøD
DERATING CURVE
HOT-SPOT TEMPERATURE
Surface Temp. Rise (ºC)
Applied Load, % of RCWV
Rated Load (%)
Measuring Position
MF0207
MF0204
200
150
100
50
0 25 50 75 100
Ambient Temperature (ºC)
20 40 60 80 100 120 140 160 180
70ºC
100
80
60
40
20
Note :
ELECTRICAL CHARACTERISTICS
STYLE MF0204 MF0207
Power Rating at 70ºC 0.4W 0.6W
Operating Temp. Range -55ºC to +155ºC
Maximum Working Voltage 200V 300V
Maximum Overload Voltage 400V 600V
Dielectric Withstanding Voltage 300V 500V
Value Range r1% 10:~1M:
Temperature Coefficient r50ppm/ºC
* Standard resistance is 10:~1M:, below or over this resistance on request.
ENVIRONMENTAL CHARACTERISTICS
PERFORMANCE TEST TEST METHOD APPRAISE
Short Time Overload JIS-C-5202 5.5 2.5 Times RCW V for 5 Seconds r(0.25%+0.05:)
Dielectric Withstanding Voltage JIS-C-5202 5.7 in V-Block for 60 Seconds by Type
Temperature Coefficient of Resistance JIS-C-5202 5.2 -55ºC to +155ºC r50ppm/ºC
Insulation Resistance JIS-C-5202 5.6 in V-Block >10000M:
Solderability JIS-C-5202 6.5 235ºC for 5r0.5 Seconds 95% Min. Coverage
Resistance to Solvent JIS-C-5202 6.9 IPA for 1 Min. with Ultrasonic No Deterioration of
Coatings and Markings
Terminal Strength Direct Load for 10 Sec. in The Direction of The Terminal Leads t2.5kg (24.5N)
Pulse Overload JIS-C-5202 5.8 4 Times RCW V 10000 Cycles (1 Sec. on , 25 Sec. off) r(1%+0.05:)
Load Life in Humidity JIS-C-5202 7.9 40r2ºC, 90~95% RH at RCW V for 1000 Hrs. r(1.5%+0.05:)
(1.5 Hrs. on , 0.5 Hrs. off )
Load Life JIS-C-5202 7.10 70ºC at RCW V for 1000 Hrs. (1.5 Hrs. on , 0.5 Hrs. off) r(1.5%+0.05:)
Temperature Cycling JIS-C-5202 7.4 -55ºC➞Room Temp.➞+155ºC ➞Room Temp. for 5 Cycles r(0.75%+0.05:)
Resistance to Soldering Heat JIS-C-5202 6.4 350ºCr10ºC for 3r0.5 Seconds r(0.25%+0.05:)
* Rated Continuous Working Voltage (RCW V)= Power Rating x Resistance Value
YAGEO CORPORATION LEADED RESISTORS
Metal Film Resistors FLAME-PROOF TYPE
Normal & Miniature Style [ FMF Series ]
FEATURES
Power Rating 1/4W, 1/2W, 1W, 2W
FlameProof Silicone Coating UL94V-0
Resistance Tolerance r1%
T.C.R. r50ppm/ºC, r100ppm/ºC
DIMENSIONS
STYLE DIMENSION
Normal Miniature L øD H ød
FMF-25 FMF50S 6.3r0.5 2.4r0.2 28r2.0 0.6r0.05
FMF-50 FMF1WS 9.0r0.5 3.3r0.3 26r2.0 0.6r0.05
FMF100 FMF2WS 11.5r1.0 4.5r0.5 35r2.0 0.8r0.05
FMF200 – 15.5r1.0 5.0r0.5 33r2.0 0.8r0.05
Unit : mm
INTRODUCTION
The FMF series flame-proof type Metal Film
Resistors are manufactured by vacuum
deposit metal film on high thermal conductiv-
ity ceramic rods, and are coated with layers of
gray color flame-proof lacquer.
These FMF flame-proof metal film resistor is
designed to replace the metal oxide resistors
and low power wire wound resistors, where
when flame-proof and small size is needed.
ød
HLøD
DERATING CURVE
HOT-SPOT TEMPERATURE
Surface Temp. Rise (ºC)
Applied Load, % of RCWV
FMF2WS
FMF200 FMF1WS
FMF100 FMF50S
FMF-50
FMF-25
0 25 50 75 100
200
150
100
50
Measuring Position
Ambient Temperature (ºC)
Rated Load (%) 100
80
60
40
20
20 40 60 80 100 120 140 160 180
70ºC
Note :
ELECTRICAL CHARACTERISTICS
STYLE FMF-25 FMF50S FMF-50 FMF1WS FMF100 FMF2WS FMF200
Power Rating at 70ºC 1/4W 1/2W 1W 2W
Operating Temp. Range -55ºC to +155ºC
Maximum Working Voltage 250V 300V 350V 400V 500V 500V 500V
Maximum Overload Voltage 500V 600V 700V 800V 1000V 1000V 1000V
Dielectric Withstanding Voltage 400V 400V 500V 600V 750V 750V 750V
Value Range r1% 10:~1M:
Temperature Coefficient (by Type) r50ppm/ºC, r100ppm/ºC
* Standard resistance is 10:~1M:, below or over this resistance on request.
ENVIRONMENTAL CHARACTERISTICS
PERFORMANCE TEST TEST METHOD APPRAISE
Short Time Overload JIS-C-5202 5.5 2.5 Times RCW V for 5 Seconds r(0.25%+0.05:)
Dielectric Withstanding Voltage JIS-C-5202 5.7 in V-Block for 60 Seconds by Type
Temperature Coefficient of Resistance JIS-C-5202 5.2 -55ºC to +155ºC by Type
Insulation Resistance JIS-C-5202 5.6 in V-Block >1000M:
Solderability JIS-C-5202 6.5 235ºC for 5r0.5 Seconds 95% Min. Coverage
Resistance to Solvent JIS-C-5202 6.9 IPA for 1 Min. with Ultrasonic No Deterioration of
Coatings and Markings
Terminal Strength Direct Load for 10 Sec. in The Direction of The Terminal Leads t2.5kg (24.5N)
Pulse Overload JIS-C-5202 5.8 4 Times RCW V 10000 Cycles (1 Sec. on , 25 Sec. off) r(1%+0.05:)
Load Life in Humidity JIS-C-5202 7.9 40r2ºC, 90~95% RH at RCW V for 1000 Hrs. r(1.5%+0.05:)
(1.5 Hrs. on , 0.5 Hrs. off )
Load Life JIS-C-5202 7.10 70ºC at RCW V for 1000 Hrs. (1.5 Hrs. on , 0.5 Hrs. off) r(1.5%+0.05:)
Temperature Cycling JIS-C-5202 7.4 -55ºC➞Room Temp.➞+155ºC ➞Room Temp. for 5 Cycles r(0.75%+0.05:)
Resistance to Soldering Heat JIS-C-5202 6.4 350ºCr10ºC for 3r0.5 Seconds r(0.25%+0.05:)
* Rated Continuous Working Voltage (RCW V)= Power Rating x Resistance Value
YAGEO CORPORATION LEADED RESISTORS
Metal Film Resistors
PROFESSIONAL &
FLAME-PROOF TYPE
Miniature Style [ FM0 Series ]
FEATURES
DIN 44061, 45921 part 107
CECC 40101-039, 40101-017
Flameproof Silicone Coating UL94V-0
Resistance Tolerance r1%
T.C.R. r50ppm/ºC
INTRODUCTION
The FM0 Series are manufactured by high
vacuum sputtering deposit metal film on high
thermal conductivity and specific gravity
ROSENTHAL ceramic or same grade rods.
The FM0207 are coated with multilayers of
light-green color flame-proof lacquer.
The FM0207 meets severe overload test in
accordance with UL specification # 1412
without fire hazard.
DERATING CURVE
Ambient Temperature (ºC)
Rated Load (%) 100
80
60
40
20
20 40 60 80 100 120 140 160 180
70ºC
DIMENSIONS
STYLE L øD H ød
FM0204 3.4r0.3 1.9r0.2 28r2.0 0.5r0.05
FM0207 6.3r0.5 2.4r0.2 28r2.0 0.6r0.05
Unit : mm
ød
HLøD
HOT-SPOT TEMPERATURE
Surface Temp. Rise (ºC)
Applied Load, % of RCWV
Measuring Position
FM0207
FM0204
200
150
100
50
0 25 50 75 100
Note :
ELECTRICAL CHARACTERISTICS
STYLE FM0204 FM0207
Power Rating at 70ºC 0.4W 0.6W
Operating Temp. Range -55ºC to +155ºC
Maximum Working Voltage 200V 300V
Maximum Overload Voltage 400V 600V
Dielectric Withstanding Voltage 300V 500V
Value Range r1% 10:~1M:
Temperature Coefficient r50ppm/ºC
* Standard resistance is 10:~1M:, below or over this resistance on request.
ENVIRONMENTAL CHARACTERISTICS
PERFORMANCE TEST TEST METHOD APPRAISE
Short Time Overload JIS-C-5202 5.5 2.5 Times RCW V for 5 Seconds r(0.25%+0.05:)
Dielectric Withstanding Voltage JIS-C-5202 5.7 in V-Block for 60 Seconds by Type
Temperature Coefficient of Resistance JIS-C-5202 5.2 -55ºC to +155ºC r50ppm/ºC
Insulation Resistance JIS-C-5202 5.6 in V-Block >1000M:
Solderability JIS-C-5202 6.5 235ºC for 5r0.5 Seconds 95% Min. Coverage
Resistance to Solvent JIS-C-5202 6.9 IPA for 1 Min. with Ultrasonic No Deterioration of
Coatings and Markings
Terminal Strength Direct Load for 10 sec. in The Direction of The Terminal Leads t2.5kg (24.5N)
Pulse Overload JIS-C-5202 5.8 4 Times RCW V 10000 Cycles (1 Sec. on , 25 Sec. off) r(1%+0.05:)
Load Life in Humidity JIS-C-5202 7.9 40r2ºC, 90~95% RH at RCW V for 1000 Hrs. r(1.5%+0.05:)
(1.5 Hrs. on , 0.5 Hrs. off )
Load Life JIS-C-5202 7.10 70ºC at RCW V for 1000 Hrs. (1.5 Hrs. on , 0.5 Hrs. off) r(1.5%+0.05:)
Temperature Cycling JIS-C-5202 7.4 -55ºC➞Room Temp.➞+155ºC ➞Room Temp. for 5 Cycles r(0.75%+0.05:)
Resistance to Soldering Heat JIS-C-5202 6.4 350ºCr10ºC for 3r0.5 Seconds r(0.25%+0.05:)
* Rated Continuous Working Voltage (RCW V)= Power Rating x Resistance Value
YAGEO CORPORATION LEADED RESISTORS
Metal Film Resistors Power Flame-proof Type
FMP Series
Ambient Temperature (ºC)
Rated Load (%) 100
80
60
40
20
20 40 60 80 100 120 140 160 180
70ºC
POWER DERATING CURVE
For resistors operated in ambient temperatures above 70ºC , power
rating must be derated in accordance with the curve below.
GENERAL PURPOSE
Power Rating : 1/2W, 1W, 2W, 3W
Resistance Tolerance : r1% , r5%
High thermal conductivity and specific gravity rods
FlameProof Silicone Coating : UL94V-0
Pink body color
DIMENSIONS
STYLE L øD H ød
FMP-50 3.4r0.3 1.9r0.2 28r2.0 0.5r0.05
FMP100 6.3r0.5 2.4r0.2 28r2.0 0.6r0.05
FMP200 9.0r0.5 3.9r0.3 26r2.0 0.8r0.05
FMP300 15.5r1.0 5.0r0.5 33r2.0 0.8r0.05
ød
HLøD
Unit : mm
Note :
ELECTRICAL CHARACTERISTICS
PERFORMANCE STYLE TEST METHOD FMP-50 FMP100 FMP200 FMP300
Power Rating at 70ºC 1/2W 1W 2W 3W
Maximum Working Voltage 200V 350V 500V 750V
Maximum Overload Voltage 400V 600V 700V 1000V
Dielectric Withstanding Voltage JIS-C-5202 5.7 in V-Block for 60 Seconds 300V 500V 500V 750V
Temperature Coefficient JIS-C-5202 5.2 Room Temp. Add 100ºC r100ppm/ºC
Short Time Overload JIS-C-5202 5.5 2.5 Times RCWV for 5 Sec. r2.0%+0.05:
Insulation Resistance JIS-C-5202 5.6 in V-Block >1,000M:
Pulse Overload JIS-C-5202 5.8 4 Times RCWV 10,000 Cycles r1.0%+0.05:
(1 Sec. on , 25 Sec. off )
Operating Temp. Range -55ºC to + 155ºC
Value Rang r1% 10: To 1M: for E24 or E96 Series
Value Range r5% 1: To 1M: for E24 Series
* Resistance range for standard resistance, below or over this resistance on request.
ENVIRONMENTAL CHARACTERISTICS
PERFORMANCE TEST TEST METHOD APPRAISE
Terminal Strength JIS-C-5202 6.1 Direct load for 10 Sec. in the Direction of the Terminal Leads t2.5kg (24.5N)
Resistance to Soldering Heat JIS-C-5202 6.4 350ºC r 10ºC for 3 r 0.5 Seconds r0.25%+0.05:
Solderability JIS-C-5202 6.5 235ºC r 5ºC for 5 r 0.5 Seconds 95% Min. Coverage
Resistance to Solvent JIS-C-5202 6.9 IPA for 1 Min. with Ultrasonic No Deterioration of
Coatings and Markings
Temperature Cycling JIS-C-5202 7.4 -55ºC➞Room Temp.➞+155ºC➞Room Temp. for 5 Cycles r1.0%+0.05:
Humidity JIS-C-5202 7.5 40r2ºC, 90~95% RH for 1,000 Hrs. r1.0%+0.05:
Load Life in Humidity JIS-C-5202 7.9 40r2ºC, 90~95% RH at RCW V for 1,000 Hrs. r2.0%+0.05:
(1.5 Hrs. on , 0.5 Hrs. off )
Load Life JIS-C-5202 7.10 70ºC at RCW V for 1,000 Hrs. (1.5 Hrs. on, 0.5 Hrs. off ) r2.0%+0.05:
Overload Flame Retardant JIS-C-5202 7.12 4 Times RCW V for 1 minute No evidence of
flaming or arcing
* Rated Continuous Working Voltage (RCW V)= Power Rating x Resistance Value
YAGEO CORPORATION LEADED RESISTORS
Metal Oxide Film Resistors
FLAME-PROOF TYPE
Normal & Miniature Style
[
RSF Series
]
FEATURES
Low Cost, Prompt Delivery
High Power-to-Size Ratio for Significant Space Savings
Flameproof Silicone Coating (UL94V-0)
High Surge/Overload Capability
Non-Inductive Design
Wide Resistance Range: 1:~1M:
Resistance ToLerance: r5%
Unit : mm
INTRODUCTION
These Metal Oxide Resistors offer excellent
performance in applications where stability
and uniformity of characteristics are desired.
They provide lower cost alternatives to
Carbon Composition Resistors and General
Purpose Metal Films. Metal Oxides also can
replace many low power General Purpose
wirewound applications, saving both money
and time, with shorter delivery cycles.
The normal style & the miniature style of RSF
series are coated with layers of gray and pink
colors flame-proof lacquer respectively.
DIMENSIONS
STYLE DIMENSION
Normal Miniature L øD H ød
RSF-25 RSF50S 6.3r0.5 2.4r0.2 28r2.0 0.6r0.05
RSF-50 RSF1WS 9.0r0.5 3.3r0.3 26r2.0 0.6r0.05
RSF100 RSF2WS 11.5r1.0 4.5r0.5 35r2.0 0.8r0.05
RSF200 RSF3WS 15.5r1.0 5.0r0.5 33r2.0 0.8r0.05
RSF5SS RSF3WM 17.5r1.0 6.5r1.0 32r2.0 0.8r0.05
RSF300 RSF5WS 24.5r1.0 8.5r1.0 38r2.0 0.8r0.05
RSF500 – 24.5r1.0 8.5r1.0 38r2.0 0.8r0.05
* RSFIWS (MB Type) ød0.8r0.05
Ambient Temperature (ºC)
Rated Load (%)
HOT-SPOT TEMPERATURE
Surface Temp. Rise (ºC)
Applied Load, % of RCWV
100
80
60
40
20
50 100 150 200 250
70ºC
0 25 50 75 100
200
150
100
50
RSF500 RSF5WS
RSF300 RSF3WM, RSF5SS
RSF2WS RSF3WS
RSF200 RSF1WS
RSF100
RSF50S
RSF-50
Measuring Position
DERATING CURVE
ød
HLøD
Note :
ELECTRICAL CHARACTERISTICS
STYLE RSF-25 RSF50S RSF-50 RSF1WS RSF100 RSF2WS RSF200 RSF3WS/ RSF300 RSF5SS/ RSF500
RSF3WM RSF5WS
Power Rating at 70ºC 1/4W 1/2W 1W 2W 3W 5W
Operating Temp. Range -55ºC to +155ºC
Maximum Working Voltage 200V 250V 250V 300V 350V 350V 350V 350V/450V 500V 500V/500V 750V
Maximum Overload Voltage 300V 400V 400V 500V 600V 600V 600V 600V/700V 800V 800V/800V 1000V
Dielectric Withstanding Voltage 250V 350V 350V 400V 500V 500V 500V 500V/600V 700V 700V/750V 750V
Value Range r5% 1:~1M:
Temperature Coefficient r300ppm/ºC
* Standard resistance is 1:~1M:, below or over this resistance on request.
10
ENVIRONMENTAL CHARACTERISTICS
PERFORMANCE TEST TEST METHOD APPRAISE
Short Time Overload JIS-C-5202 5.5 2.5 Times RCW V for 5 Seconds r(1%+0.05:)
Dielectric Withstanding Voltage JIS-C-5202 5.7 in V-Block for 60 Seconds by Type
Temperature Coefficient of Resistance JIS-C-5202 5.2 -55ºC to +155ºC r300ppm/ºC
Insulation Resistance JIS-C-5202 5.6 in V-Block >1000M:
Solderability JIS-C-5202 6.5 235ºC for 5r0.5 Seconds 95% Min. Coverage
Resistance to Solvent JIS-C-5202 6.9 IPA for 1 Min. with Ultrasonic No Deterioration of
Coatings and Markings
Terminal Strength Direct Load for 10 Sec. in The Direction of The Terminal Leads t2.5kg (24.5N)
Pulse Overload JIS-C-5202 5.8 4 Times RCW V 10000 Cycles (1 Sec. on , 25 Sec. off) r(2%+0.05:)
Load Life in Humidity JIS-C-5202 7.9 40r2ºC, 90~95% RH at RCW V for 1000 Hrs. r(5%+0.05:)
(1.5 Hrs. on , 0.5 Hrs. off )
Load Life JIS-C-5202 7.10 70ºC at RCWV for 1000 Hrs. (1.5 Hrs. on , 0.5 Hrs. off) r(5%+0.05:)
Temperature Cycling JIS-C-5202 7.4 -55ºC➞Room Temp.➞+155ºC➞Room Temp. for 5 Cycles r(1%+0.05:)
Resistance to Soldering Heat JIS-C-5202 6.4 350ºCr10ºC for 3r0.5 Seconds r(1%+0.05:)
* Rated Continuous Working Voltage (RCW V)= Power Rating x Resistance Value
YAGEO CORPORATION LEADED RESISTORS
Carbon Film Resistors CFR Series
Normal & Miniature Style
FEATURES
Industry’s Lowest Cost
Delivery From Stock in Bulk, Taped and Strip Pack
Exceptional Long-Term Stability
Exceeds Carbon Comp MIL-R-11 Performance
Resistance Tolerance: r2%, r5%
Variety of Packaging–Bulk, Strip Pack, 26mm and 52mm Tape and Reel, Cut and Formed, or Radial
Panasert/Avisert
Unit : mm
INTRODUCTION
Billions of products are already in use
worldwide in all types of applications-from
process control instrumentation to telephone
receivers and FM radio to color television.
The secret is in a proprietary production
system and baking by a uniquely designed and
automated production technique. Years of
experience in making raw materials and
production machinery prove the unique
quality and high reliability of these products.
The meet-or far exceed-such specifications as
EIA RS196A. JIS-C-6402 and IEC-115.
The resistors are coated with layers of tan
color lacquer.
ød
HLøD
DIMENSIONS
STYLE DIMENSION
Normal Miniature L øD H ød
CFR-12 CFR25S 3.4r0.3 1.9r0.2 28r2.0 0.5r0.05
CFR-25 CFR50S 6.3r0.5 2.4r0.2 28r2.0 0.6r0.05
CFR-50 CFR1WS 9.0r0.5 3.3r0.3 26r2.0 0.6r0.05
CFR100 CFR2WS 11.5r1.0 4.5r0.5 35r2.0 0.8r0.05
CFR200 – 15.5r1.0 5.0r0.5 33r2.0 0.8r0.05
DERATING CURVE
Ambient Temperature (ºC)
Rated Load (%) Surface Temp. Rise (ºC)
Applied Load, % of RCWV
TABLE 1 TEMPERATURE COEFFICIENT
STYLE Max. Value of Temp. Coefficient ppm/ºC
under 100K:
100
K:
~ 1M:
1M: ~ 10M:
CFR100, CFR200, CFR2WS r350 -500 -1500
CFR-12, CFR-25, CFR-50, +350 -700 -1500
CFR25S, CFR50S, CFR1WS -500
HOT-SPOT TEMPERATURE
70ºC
20 40 60 80 100 120 140 160 180
100
80
60
40
20
Measuring Position
200
150
100
50
CFR2WS
CFR200 CFR1WS
CFR100 CFR50S
CFR-50 CFR25S
CFR-12 CFR-25
0 25 50 75 100
Note :
ELECTRICAL CHARACTERISTICS
STYLE CFR-12 CFR25S CFR-25 CFR50S CFR-50 CFR1WS CFR100 CFR2WS CFR200
Power Rating at 70ºC 1/6W 1/4W 1/2W 1W 2W
Operating Temp. Range -55ºC to +155ºC
Maximum Working Voltage 150V 200V 250V 300V 350V 400V 500V 500V 500V
Maximum Overload Voltage 300V 400V 500V 600V 700V 800V 1000V 1000V 1000V
Dielectric Withstanding Voltage 300V 400V 500V 500V 500V 700V 1000V 1000V 1000V
Value Range r2%, r5% 1:~10M:
Temperature Coefficient (by Type) see TABLE 1
* Standard resistance is 1:~10M:, below or over this resistance on request.
ENVIRONMENTAL CHARACTERISTICS
PERFORMANCE TEST TEST METHOD APPRAISE
Short Time Overload JIS-C-5202 5.5 2.5 Times RCW V for 5 Seconds r(0.75%+0.05:)
Dielectric Withstanding Voltage JIS-C-5202 5.7 in V-Block for 60 Seconds by Type
Temperature Coefficient of Resistance JIS-C-5202 5.2 -55ºC to +155ºC by Type
Insulation Resistance JIS-C-5202 5.6 in V-Block >1000M:
Solderability JIS-C-5202 6.5 235ºC for 5r0.5 Seconds 95% Min. Coverage
Resistance to Solvent JIS-C-5202 6.9 IPA for 1 Min. with Ultrasonic No Deterioration of
Coatings and Markings
Terminal Strength Direct Load for 10 Sec. in The Direction of The Terminal Leads t2.5kg (24.5N)
Pulse Overload JIS-C-5202 5.8 4 Times RCW V 10000 Cycles (1 Sec. on , 25 Sec. off) r(1%+0.05:)
Load Life in Humidity JIS-C-5202 7.9 40r2ºC, 90~95% RH at RCW V for 1000 Hrs. r(3%+0.05:)
(1.5 Hrs. on , 0.5 Hrs. off )
Load Life JIS-C-5202 7.10 70ºC at RCW V for 1000 Hrs. (1.5 Hrs. on , 0.5 Hrs. off) r(3%+0.05:)
Temperature Cycling JIS-C-5202 7.4 -55ºC➞Room Temp.➞+155ºC➞Room Temp. for 5 Cycles r(1%+0.05:)
Resistance to Soldering Heat JIS-C-5202 6.4 350ºCr10ºC for 3r0.5 Seconds r(1%+0.05:)
* Rated Continuous Working Voltage (RCW V)= Power Rating x Resistance Value
YAGEO CORPORATION LEADED RESISTORS
DIMENSIONS
STYLE L øD H ød
CF0204 3.4r0.3 1.9r0.2 28r2.0 0.5r0.05
CF0207 6.3r0.5 2.4r0.2 28r2.0 0.6r0.05
Carbon Film Resistors PROFESSIONAL TYPE
Miniature Style [ CF0 Series ]
FEATURES
Excellent Long-Term Stability
Miniature in Size
Resistance Tolerance: r5%
Resistance Range: 1:~10M:
INTRODUCTION
The CF0 series are manufactured by Coating
a homogeneous film of pure carbon on high
grade ceramic rods, resistance less than 10:
have an electroless-deposited nickel film.
The resistors are coated with layers of tan
color lacquer.
Unit : mm
DERATING CURVE
Ambient Temperature (ºC)
Rated Load (%) Surface Temp. Rise (ºC)
Applied Load, % of RCWV
HOT-SPOT TEMPERATURE
70ºC
20 40 60 80 100 120 140 160 180
100
80
60
40
20
Measuring Position
CF0207
CF0204
200
150
100
50
0 25 50 75 100
ød
HLøD
TABLE 1 TEMPERATURE COEFFICIENT
STYLE Max. Value of Temp. Coefficient ppm/ºC
under 100K:
100
K:
~ 1M:
1M: ~ 10M:
CF0204, CF0207 +350 -700 -1500
-500
Note :
ELECTRICAL CHARACTERISTICS
STYLE CF0204 CF0207
Power Rating at 70ºC 0.4W 0.6W
Operating Temp. Range -55ºC to +155ºC
Maximum Working Voltage 200V 300V
Maximum Overload Voltage 400V 600V
Dielectric Withstanding Voltage 300V 500V
Value Range r5% 1:~10M:
Temp. Coefficient (by Type) see TABLE 1
* Standard resistance is 1:~10M:, below or over this resistance on request.
ENVIRONMENTAL CHARACTERISTICS
PERFORMANCE TEST TEST METHOD APPRAISE
Short Time Overload JIS-C-5202 5.5 2.5 Times RCW V for 5 Seconds r(0.75%+0.05:)
Dielectric Withstanding Voltage JIS-C-5202 5.7 in V-Block for 60 Seconds by Type
Temperature Coefficient of Resistance JIS-C-5202 5.2 -55ºC to +155ºC by Type
Insulation Resistance JIS-C-5202 5.6 in V-Block >1000M:
Solderability JIS-C-5202 6.5 235ºC for 5r0.5 Seconds 95% Min. Coverage
Resistance to Solvent JIS-C-5202 6.9 IPA for 1 Min. with Ultrasonic No Deterioration of
Coatings and Markings
Terminal Strength Direct Load for 10 Sec. in The Direction of The Terminal Leads t2.5kg (24.5N)
Pulse Overload JIS-C-5202 5.8 4 Times RCW V 10000 Cycles (1 Sec. on , 25 Sec. off) r(1%+0.05:)
Load Life in Humidity JIS-C-5202 7.9 40r2ºC, 90~95% RH at RCW V for 1000 Hrs. r(3%+0.05:)
(1.5 Hrs. on , 0.5 Hrs. off )
Load Life JIS-C-5202 7.10 70ºC at RCW V for 1000 Hrs. (1.5 Hrs. on , 0.5 Hrs. off) r(3%+0.05:)
Temperature Cycling JIS-C-5202 7.4 -55ºC➞Room Temp.➞+155ºC➞Room Temp. for 5 Cycles r(1%+0.05:)
Resistance to Soldering Heat JIS-C-5202 6.4 350ºCr10ºC for 3r0.5 Seconds r(1%+0.05:)
* Rated Continuous Working Voltage (RCW V)= Power Rating x Resistance Value
YAGEO CORPORATION LEADED RESISTORS
DIMENSIONS
STYLE DIMENSION
Normal Miniature L øD H ød
FCR-25 FCR50S 6.3r0.5 2.4r0.2 28r2.0 0.6r0.05
FCR-50 FCR1WS 9.0r0.5 3.3r0.3 26r2.0 0.6r0.05
FCR100 FCR2WS 11.5r1.0 4.5r0.5 35r2.0 0.8r0.05
FCR200 – 15.5r1.0 5.0r0.5 33r2.0 0.8r0.05
TABLE1 TEMPERATURE COEFFICIENT
STYLE Max. Value of Temp. Coefficient ppm/ºC
under 100K:
100
K:
~ 1M:
1M: ~
10M:
FCR100, FCR200, FCR2WS r350 -500 -1500
FCR-25, FCR-50, +350 -700 -1500
FCR50S, FCR1WS -500
Carbon Film Resistors FLAME-PROOF TYPE
Normal & Miniature Style
[
FCR Series
]
FEATURES
Low Cost. Prompt Delivery
High Power-to-Size Ratio for Significant Space Savings
Flameproof Silicone Coating (UL94V-0)
Excellent Long-Term Stability
Wide Resistance Range: 1:~10M:
Resistance Tolerance: r5%
Unit : mm
INTRODUCTION
The FCR series flame-proof Carbon Film
Resistors are manufactured by Coating a
homogeneous film of pure carbon on high
grade ceramic rods, resistance less than
10: have an electroless deposited nickel
film, and are coated with layers of gray color
flame-proof lacquer. These resistors meet
overload tests in accordance with UL
specification #1412 without producing a
fire hazard.
* The 5th is black color band for FCR series
DERATING CURVE
Ambient Temperature (ºC)
Rated Load (%) Surface Temp. Rise (ºC)
Applied Load, % of RCWV
HOT-SPOT TEMPERATURE
70ºC
20 40 60 80 100 120 140 160 180
100
80
60
40
20
Measuring Position
FCR2WS
FCR200 FCR1WS
FCR100 FCR50S
FCR-50
FCR-25
200
150
100
50
0 25 50 75 100
ød
HLøD
Note :
ELECTRICAL CHARACTERISTICS
STYLE FCR-25 FCR50S FCR-50 FCR1WS FCR100 FCR2WS FCR200
Power Rating at 70ºC 1/4W 1/2W 1W 2W
Operating Temp. Range -55ºC to +155ºC
Maximum Working Voltage 250V 300V 350V 400V 500V 500V 500V
Maximum Overload Voltage 500V 600V 700V 800V 1000V 1000V 1000V
Dielectric Withstanding Voltage 400V 400V 500V 600V 750V 750V 750V
Value Range r2%, r5% 1:~10M:
Temperature Coefficient (by Type) see TABLE1
* Standard resistance is 1:~10M:, below or over this resistance on request.
ENVIRONMENTAL CHARACTERISTICS
PERFORMANCE TEST TEST METHOD APPRAISE
Short Time Overload JIS-C-5202 5.5 2.5 Times RCW V for 5 Seconds r(0.75%+0.05:)
Dielectric Withstanding Voltage JIS-C-5202 5.7 in V-Block for 60 Seconds by Type
Temperature Coefficient of Resistance JIS-C-5202 5.2 -55ºC to +155ºC by Type
Insulation Resistance JIS-C-5202 5.6 in V-Block >1000M:
Solderability JIS-C-5202 6.5 235ºC for 5r0.5 Seconds 95% Min. Coverage
Resistance to Solvent JIS-C-5202 6.9 IPA for 1 Min. with Ultrasonic No Deterioration of
Coatings and Markings
Terminal Strength Direct load for 10 Sec. in The Direction of The Terminal Leads t2.5kg (24.5N)
Pulse Overload JIS-C-5202 5.8 4 Times RCW V 10000 Cycles (1 Sec. on , 25 Sec. off) r(1%+0.05:)
Load Life in Humidity JIS-C-5202 7.9 40r2ºC, 90~95% RH at RCW V for 1000 Hrs. r(3%+0.05:)
(1.5 Hrs. on , 0.5 Hrs. off )
Load Life JIS-C-5202 7.10 70ºC at RCW V for 1000 Hrs. (1.5 Hrs. on , 0.5 Hrs. off) r(3%+0.05:)
Temperature Cycling JIS-C-5202 7.4 -55ºC➞Room Temp.➞+155ºC➞Room Temp. for 5 Cycles r(1%+0.05:)
Resistance to Soldering Heat JIS-C-5202 6.4 350ºCr10ºC for 3r0.5 Seconds r(1%+0.05:)
* Rated Continuous Working Voltage (RCW V)= Power Rating x Resistance Value
YAGEO CORPORATION LEADED RESISTORS
Carbon Film Resistors
PROFESSIONAL &
FLAME-PROOF TYPE
Miniature Style [ FC0 Series ]
FEATURES
Excellent Long-Term Stability
Miniature in Size
Flameproof Silicone Coating (UL94V-0)
Resistance Tolerance: r5%
Resistance Range: 1:~10M:
INTRODUCTION
The FC0 series are manufactured by Coating
a homogeneous film of pure carbon on high
grade ceramic rods, resistance less than 10:
have an electroless-deposited nickel film.
The FC0207 are coated with layers of green
color flame-proof lacquer.
The FC0207 resistors meet overload test in
accordance with UL specification #1412
without producing a fire hazard.
DIMENSIONS
STYLE L øD H ød
FC0204 3.4r0.3 1.9r0.2 28r2.0 0.5r0.05
FC0207 6.3r0.5 2.4r0.2 28r2.0 0.6r0.05
Unit : mm
DERATING CURVE
Ambient Temperature (ºC)
Rated Load (%) Surface Temp. Rise (ºC)
Applied Load, % of RCWV
HOT-SPOT TEMPERATURE
70ºC
20 40 60 80 100 120 140 160 180
100
80
60
40
20
Measuring Position
FC0207
FC0204
200
150
100
50
0 25 50 75 100
ød
HLøD
TABLE 1 TEMPERATURE COEFFICIENT
STYLE Max. Value of Temp. Coefficient ppm/ºC
under 100K:
100
K:
~ 1M:
1M: ~ 10M:
FC0204, FC0207 +350 -700 -1500
-500
Note :
ELECTRICAL CHARACTERISTICS
STYLE FC0204 FC0207
Power Rating at 70ºC 0.4W 0.6W
Operating Temp. Range -55ºC to +155ºC
Maximum Working Voltage 200V 300V
Maximum Overload Voltage 400V 600V
Dielectric Withstanding Voltage 300V 500V
Value Range r5% 1:~10M:
Temperature Coefficient (by Type) see TABLE 1
* Standard resistance is 1:~10M:, below or over this resistance on request.
ENVIRONMENTAL CHARACTERISTICS
PERFORMANCE TEST TEST METHOD APPRAISE
Short Time Overload JIS-C-5202 5.5 2.5 Times RCW V for 5 Seconds r(0.75%+0.05:)
Dielectric Withstanding Voltage JIS-C-5202 5.7 in V-Block for 60 Seconds by Type
Temperature Coefficient of Resistance JIS-C-5202 5.2 -55ºC to +155ºC by Type
Insulation Resistance JIS-C-5202 5.6 in V-Block >1000M:
Solderability JIS-C-5202 6.5 235ºC for 5r0.5 Seconds 95% Min. Coverage
Resistance to Solvent JIS-C-5202 6.9 IPA for 1 Min. with Ultrasonic No Deterioration of
Coatings and Markings
Terminal Strength Direct Load for 10 Sec. in The Direction of The Terminal Leads t2.5kg (24.5N)
Pulse Overload JIS-C-5202 5.8 4 Times RCW V 10000 Cycles (1 Sec. on , 25 Sec. off) r(1%+0.05:)
Load Life in Humidity JIS-C-5202 7.9 40r2ºC, 90~95% RH at RCW V for 1000 Hrs. r(3%+0.05:)
(1.5 Hrs. on , 0.5 Hrs. off )
Load Life JIS-C-5202 7.10 70ºC at RCW V for 1000 Hrs. (1.5 Hrs. on , 0.5 Hrs. off) r(3%+0.05:)
Temperature Cycling JIS-C-5202 7.4 -55ºC➞Room Temp.➞+155ºC➞Room Temp. for 5 Cycles r(1%+0.05:)
Resistance to Soldering Heat JIS-C-5202 6.4 350ºCr10ºC for 3r0.5 Seconds r(1%+0.05:)
* Rated Continuous Working Voltage (RCW V)= Power Rating x Resistance Value
YAGEO CORPORATION LEADED RESISTORS
Metal Film Resistors
Non Inductive Type
NCR Series
Normal Style
Ambient Temperature (ºC)
Rated Load (%) 100
80
60
40
20
20 40 60 80 100 120 140 160 180
70ºC
Unit : mm
ød
HLøD
DIMENSIONS
STYLE L øD H ød
NCR-25 6.3r0.5 2.4r0.2 28r2.0 0.6r0.05
NCR-50 9.0r0.5 3.3r0.3 26r2.0 0.7r0.05
NCR100 11.5r1.0 4.5r0.5 35r2.0 0.8r0.05
NCR200 15.5r1.0 5.0r0.5 33r2.0 0.8r0.05
POWER DERATING CURVE
For resistors operated in ambient temperatures above 70ºC , power
rating must be derated in accordance with the curve below.
FEATURES
Power Rating : 1/4W, 1/2W, 1W, 2W
Resistance Tolerance : r5% , r10%
FlameProof Silicone Coating : UL94V-0
Gray body color
The 5th color band is green to represent non-inductive resistors
Inductance : <1PH
Note :
ELECTRICAL CHARACTERISTICS
PERFORMANCE STYLE TEST METHOD NCR-25 NCR-50 NCR100 NCR200
Power Rating at 70ºC 1/4W 1/2W 1W 2W
Dielectric Withstanding Voltage JIS-C-5202 5.7 in V-Block for 60 Seconds 500V 700V 1000V 1000V
Temperature Coefficient JIS-C-5202 5.2 Room Temp. Add 100ºC r500ppm/ºC
Short Time Overload JIS-C-5202 5.5 2.5 Times RCWV for 5 Seconds r0.75%+0.05:
Insulation Resistance JIS-C-5202 5.6 in V-Block >1,000M:
Pulse Overload JIS-C-5202 5.8 4 Times RCWV 10,000 Cycles r0.75%+0.05:
(1 Sec. on , 25 Sec. off )
Operating Temp. Range -55ºC to + 155ºC
Value Range 2.2: To 6K: for E24 Series
* Resistance range for standard resistance, below or over this resistance on request.
ENVIRONMENTAL CHARACTERISTICS
PERFORMANCE TEST TEST METHOD APPRAISE
Terminal Strength JIS-C-5202 6.1 Direct load for 10 Sec. in the Direction of the Terminal Leads t2.5kg (24.5N)
Resistance to Soldering Heat JIS-C-5202 6.4 350ºC r 10ºC for 3 r 0.5 Seconds r1.0%+0.05:
Solderability JIS-C-5202 6.5 235ºC r 5ºC for 5 r 0.5 Seconds 95% Min. Coverage
Resistance to Solvent JIS-C-5202 6.9 IPA for 1 Min. with Ultrasonic No Deterioration of
Coatings and Markings
Temperature Cycling JIS-C-5202 7.4 -55ºC➞Room Temp.➞+155ºC➞Room Temp. for 5 Cycles r1.0%+0.05:
Humidity JIS-C-5202 7.5 40r2ºC, 90~95% RH for 1,000 Hrs. r1.0%+0.05:
Load Life in Humidity JIS-C-5202 7.9 40r2ºC, 90~95% RH at RCW V for 1,000 Hrs. r3.0%+0.05:
(1.5 Hrs. on , 0.5 Hrs. off )
Load Life JIS-C-5202 7.10 70ºC at RCW V for 1,000 Hrs. (1.5 Hrs. on, 0.5 Hrs. off ) r3.0%+0.05:
Overload Flame Retardant JIS-C-5202 7.12 4 Times RCW V for 1 minute No evidence of
flaming or arcing
* Rated Continuous Working Voltage (RCW V)= Power Rating x Resistance Value
YAGEO CORPORATION LEADED RESISTORS
Metal Film Resistors
Non Inductive Type
NCR Series
Miniature Style
Ambient Temperature (ºC)
Rated Load (%) 100
80
60
40
20
20 40 60 80 100 120 140 160 180
70ºC
ød
HLøD
DIMENSIONS
STYLE L øD H ød
NCR50S 6.3r0.5 2.4r0.2 28r2.0 0.6r0.05
NCR1WS 9.0r0.5 3.3r0.3 26r2.0 0.7r0.05
NCR2WS 11.5r1.0 4.5r0.5 35r2.0 0.8r0.05
NCR3WS 15.5r1.0 5.0r0.5 33r2.0 0.8r0.05
POWER DERATING CURVE
For resistors operated in ambient temperatures above 70ºC , power
rating must be derated in accordance with the curve below.
FEATURES
Power Rating : 1/2WS, 1WS, 2WS, 3WS
Resistance Tolerance : r5% , r10%
FlameProof Silicone Coating : UL94V-0
High thermal conductivity and specific gravity rods.
Pink body color
The 5th color band is green to represent non-inductive resistors
Inductance : <1 P H
Unit : mm
Note :
ELECTRICAL CHARACTERISTICS
PERFORMANCE STYLE TEST METHOD NCR50S NCR1WS NCR2WS NCR3WS
Power Rating at 70ºC 1/2W 1W 2W 3W
Dielectric Withstanding Voltage JIS-C-5202 5.7 in V-Block for 60 Seconds 500V 700V 1000V 1000V
Temperature Coefficient JIS-C-5202 5.2 Room Temp. Add 100ºC r500ppm/ºC
Short Time Overload JIS-C-5202 5.5 2.5 Times RCWV for 5 Seconds r2.0%+0.05:
Insulation Resistance JIS-C-5202 5.6 in V-Block >1,000M:
Pulse Overload JIS-C-5202 5.8 4 Times RCWV 10,000 Cycles r1.0%+0.05:
(1 Sec. on , 25 Sec. off )
Operating Temp. Range -55ºC to + 155ºC
Value Range 2.2: To 6K: for E24 Series
* Resistance range for standard resistance, below or over this resistance on request.
ENVIRONMENTAL CHARACTERISTICS
PERFORMANCE TEST TEST METHOD APPRAISE
Terminal Strength JIS-C-5202 6.1 Direct load for 10 Sec. in the Direction of the Terminal Leads t2.5kg (24.5N)
Resistance to Soldering Heat JIS-C-5202 6.4 350ºC r 10ºC for 3 r 0.5 Seconds r1.0%+0.05:
Solderability JIS-C-5202 6.5 235ºC r 5ºC for 5 r 0.5 Seconds 95% Min. Coverage
Resistance to Solvent JIS-C-5202 6.9 IPA for 1 Min. with Ultrasonic No Deterioration of
Coatings and Markings
Temperature Cycling JIS-C-5202 7.4 -55ºC➞Room Temp.➞+155ºC➞Room Temp. for 5 Cycles r1.0%+0.05:
Humidity JIS-C-5202 7.5 40r2ºC, 90~95% RH for 1,000 Hrs. r1.0%+0.05:
Load Life in Humidity JIS-C-5202 7.9 40r2ºC, 90~95% RH at RCW V for 1,000 Hrs. r3.0%+0.05:
(1.5 Hrs. on , 0.5 Hrs. off )
Load Life JIS-C-5202 7.10 70ºC at RCW V for 1,000 Hrs. (1.5 Hrs. on, 0.5 Hrs. off ) r3.0%+0.05:
Overload Flame Retardant JIS-C-5202 7.12 4 Times RCW V for 1 minute No evidence of
flaming or arcing
* Rated Continuous Working Voltage (RCW V)= Power Rating x Resistance Value
YAGEO CORPORATION LEADED RESISTORS
DIMENSIONS
STYLE L øD H ød
ZOR-12 3.3r0.3 1.8r0.3 28r2.0 0.5r0.05
ZOR-25 6.3r0.5 2.3r0.3 28r2.0 0.6r0.05
Zerohm Resistors ZOR Series
SPECIFICATIONS
Maximum Resistance 0.005:
Min. Insulation Resistance
Dry 10,000M:
Wet 100M:
Min. Dielectric Withstanding Voltage
Atmospheric 500V RMS
Reduced 325V RMS
Insulation Flammability Resistor Insulation is Self Extinguishing within 10 Seconds
After Externally Applied Flame is Removed
Current Rating 15 AMPS at 70ºC for 1/4W
10 AMPS at 70ºC for 1/6W
INTRODUCTION
• Similar to a 1/4W resistor (1/6W size also
available, typical resistance 0.004:)
• Ideal for automatic insertion or Cut and
Form
• Available in Tape/Reel, Tape/Box and Bulk
• Film type Zerohm also available in 1/4W
(ZOR-25) and 1/6W (ZOR-12) size
ød
H
L
øD
Unit : mm
Single Black Color Band
Denotes Zero Resistance.
YAGEO CORPORATION SMD RESISTORS
DIMENSIONS
STYLE ød L
JPW-05 0.5r0.05 26r1 52.4r1 _
JPW-06 0.6r0.05 26r1 52.4r173r1
JPW-07 0.7r0.05 26r1 52.4r173r1
JPW-08 0.8r0.05 26r1 52.4r173r1
JPW-10 1.0r0.05 26r1 52.4r173r1
Jumper Wires
JPW Series
Unit : mm
INTRODUCTION
Jumper wires or crossovers, as they are
sometimes called, are basically interconnection
devices between points on a P.C.Board.
Generally they are used for the following
reasons:
• Inability to connect two points on a P.C.
Board due to other circuit paths which
must be crossed over.
• An After-the-Fact design change that
requires new point connections.
• Circuit tuning by changing point connections.
Jumper wires offers a quick simple solution to
these problems. They are especially suited for
automatic machine insertion on lead tape or
available in all packaging styles including pre-
cut and formed leads for manual insertion.
SPECIFICATIONS
Material of Jumper Wire Soft Copper Wire with Tin Plating
Conductor Resistance 0.005:/cm
Wire Diameter ø0.5`ø0.6 `ø0.7`ø0.8`ø1.0(r0.05mm)
Tension Strength CNS 8938 within 28kg/mm2
CNS 8938 ø0.5~ø0.6mm over 24%
CNS 8938 ø0.7~ø1.0mm over 26%
ø0.5mm Minmum 94%
ø0.6~ø1.0mm Minmum 96%
CNS 8938 ø0.5mm Load 250 g 3 cycles
Twisting Strength CNS 8938 ø0.6~ø0.8mm Load 500 g 3 cycles
CNS 8938 ø1.0mm Load 1.0 kg 3 cycles
Solderability JIS520 6-5 235ºCr5ºC , 5r0.5 sec. Coverage 95%
Element of Plating JIS-H3101 Tin Minimum 99%
Thickness of Plating 3~5P
ø0.5mm 6 AMPS at 70ºC
ø0.6mm 7.5 AMPS at 70ºC
Current Rating ø0.7mm 8.5 AMPS at 70ºC
ø0.8mm 10 AMPS at 70ºC
ø1.0mm 15 AMPS at 70ºC
Appearance Smooth and Shining
Extension Rate
Conductivity
YAGEO CORPORATION LEADED RESISTORS
Wire Wound Resistors
INTRODUCTION
• The resistor is fabricated using a suitable
fiberglass or ceramic core with the
resistance wire securely crimped to the
terminals
• Small in size comparatively than other kind
resistor
• Electrical and Mectanical stability and high
reliability
• The KNP/NKN series are coated with
layers of green color flame-proof lacquer.
The resistors meet overload tests in
accordance with UL specification #1412
without producing a fire hazard
DIMENSIONS
STYLE DIMENSION
Normal Miniature L øD H ød
KNP-25 KNP50S 6.3r0.5 2.5r0.3 28r2.0 0.6r0.05
KNP-50 KNP1WS 9.0r0.5 3.3r0.3 26r2.0 0.6r0.05
KNP100 KNP2WS 11.5r1.0 4.5r0.5 35r2.0 0.8r0.05
KNP200 KNP3WS 15.5r1.0 5.0r0.5 33r2.0 0.8r0.05
KNP300 KNP5WS 17.5r1.0 6.5r1.0 32r2.0 0.8r0.05
KNP500 KNP7WS 24.5r1.0 8.5r1.0 39r2.0 0.8r0.05
Unit : mm
ød
HLøD
Rated Load (%) 20 ºC
100
80
60
40
20
20 60 100 140 200 260 275 300
Ambient Temperature ( ºC )
POWER DERATING CURVE
For resistors operated in ambient temperatures above 20ºC , power rating
must be derated in accordance with the curve below.
GENERAL PURPOSE
Power Rating : 1/4W, 1/2W, 1W, 2W, 3W, 5W, 7W
Resistance Tolerance : r5%
FlameProof Silicone Coating : UL94V-0
Green body color
Stable performance in diverse environments
High safety standard
FLAME-PROOF TYPE
Normal & Miniature Style
[
KNP Series
]
Note :
ELECTRICAL CHARACTERISTICS
PERFORMANCE STYLE TEST METHOD APPRAISE
Limiting Voltage V= PxR
Temperature Coefficient JIS-C-5202 5.2 Room Temp. Add 100ºC r300ppm/ºC
Rated Load JIS-C-5202 5.4 RCWV for 30 minutes r1.0%+0.05:
Short Time Overload JIS-C-5202 5.5 2.5 Times RCWV for 5 Seconds r2.0%+0.05:
Insulation Resistance JIS-C-5202 5.6 in V-Block , test voltage 500V >100M:
Dielectric Withstanding Voltage JIS-C-5202 5.7 in V-Block for 60 Seconds 300V
Operating Temp. Range -40ºC to + 200ºC
Standard Value Range E24 Series
Minimum Value Range 0.05:
* Resistance range for standard resistance, below or over this resistance on request.
ENVIRONMENTAL CHARACTERISTICS
PERFORMANCE TEST TEST METHOD APPRAISE
Terminal Strength JIS-C-5202 6.1 Direct load for 10 Sec. in the Direction of the Terminal Leads t2.5kg (24.5N)
Resistance to Soldering Heat JIS-C-5202 6.4 350ºC r 10ºC for 3 r 0.5 Seconds r1.0%+0.05:
Solderability JIS-C-5202 6.5 235ºC r 5ºC for 5 r 0.5 Seconds 95% Min. Coverage
Resistance to Solvent JIS-C-5202 6.9 IPA for 1 Min. with Ultrasonic No Deterioration of
Coatings and Markings
Temperature Cycling JIS-C-5202 7.4 -55ºC➞Room Temp.➞+155ºC➞Room Temp. for 5 Cycles r1.0%+0.05:
Humidity JIS-C-5202 7.5 40r2ºC, 90~95% RH for 1,000 Hrs. r3.0%+0.05:
Load Life in Humidity JIS-C-5202 7.9 40r2ºC, 90~95% RH at RCW V for 1,000 Hrs. r5.0%+0.05:
(1.5 Hrs. on , 0.5 Hrs. off )
Load Life JIS-C-5202 7.10 70ºC at RCW V for 1,000 Hrs. (1.5 Hrs. on, 0.5 Hrs. off ) r5.0%+0.05:
Overload Flame Retardant JIS-C-5202 7.12 4 Times RCW V for 1 minute No evidence of
flaming or arcing
* Rated Continuous Working Voltage (RCW V)= Power Rating x Resistance Value
YAGEO CORPORATION LEADED RESISTORS
Non Inductive Type
NKN Series
Wire Wound Resistors
DIMENSIONS
STYLE DIMENSION
Normal Miniature L øD H ød
NKN-50 NKN1WS 9.0r0.5 3.3r0.3 26r2.0 0.6r0.05
NKN100 NKN2WS 11.5r1.0 4.5r0.5 35r2.0 0.8r0.05
NKN200 NKN3WS 15.5r1.0 5.0r0.5 33r2.0 0.8r0.05
NKN300 NKN5WS 17.5r1.0 6.5r1.0 32r2.0 0.8r0.05
NKN500 NKN7WS 24.5r1.0 8.5r1.0 39r2.0 0.8r0.05
Unit : mm
ød
HLøD
Rated Load (%) 20 ºC
100
80
60
40
20
20 60 100 140 200 260 275 300
Ambient Temperature ( ºC )
POWER DERATING CURVE
For resistors operated in ambient temperatures above 20ºC , power rating
must be derated in accordance with the curve below.
GENERAL PURPOSE
Power Rating : 1/2W, 1W, 2W, 3W, 5W, 7W
Resistance Tolerance : r5%
FlameProof Silicone Coating : UL94V-0
Green body color
The 5th color band is black to represent non-inductive resistors
High safety standard
Note :
ELECTRICAL CHARACTERISTICS
PERFORMANCE STYLE TEST METHOD APPRAISE
Limiting Voltage V= PxR
Temperature Coefficient JIS-C-5202 5.2 Room Temp. Add 100ºC r300ppm/ºC
Rated Load JIS-C-5202 5.4 RCWV for 30 minutes r1.0%+0.05:
Short Time Overload JIS-C-5202 5.5 2.5 Times RCWV for 5 Seconds r2.0%+0.05:
Insulation Resistance JIS-C-5202 5.6 in V-Block , test voltage 500V >100M:
Dielectric Withstanding Voltage JIS-C-5202 5.7 in V-Block for 60 Seconds 250V
Operating Temp. Range -40ºC to + 200ºC
Standard Value Range E24 Series
Minimum Value Range 0.05:
* Resistance range for standard resistance, below or over this resistance on request.
ENVIRONMENTAL CHARACTERISTICS
PERFORMANCE TEST TEST METHOD APPRAISE
Terminal Strength JIS-C-5202 6.1 Direct load for 10 Sec. in the Direction of the Terminal Leads t2.5kg (24.5N)
Resistance to Soldering Heat JIS-C-5202 6.4 350ºC r 10ºC for 3 r 0.5 Seconds r1.0%+0.05:
Solderability JIS-C-5202 6.5 235ºC r 5ºC for 5 r 0.5 Seconds 95% Min. Coverage
Resistance to Solvent JIS-C-5202 6.9 IPA for 1 Min. with Ultrasonic No Deterioration of
Coatings and Markings
Temperature Cycling JIS-C-5202 7.4 -55ºC➞Room Temp.➞+155ºC➞Room Temp. for 5 Cycles r1.0%+0.05:
Humidity JIS-C-5202 7.5 40r2ºC, 90~95% RH for 1,000 Hrs. r3.0%+0.05:
Load Life in Humidity JIS-C-5202 7.9 40r2ºC, 90~95% RH at RCW V for 1,000 Hrs. r5.0%+0.05:
(1.5 Hrs. on , 0.5 Hrs. off )
Load Life JIS-C-5202 7.10 70ºC at RCW V for 1,000 Hrs. (1.5 Hrs. on, 0.5 Hrs. off ) r5.0%+0.05:
Overload Flame Retardant JIS-C-5202 7.12 4 Times RCW V for 1 minute No evidence of
flaming or arcing
* Rated Continuous Working Voltage (RCW V)= Power Rating x Resistance Value
YAGEO CORPORATION LEADED RESISTORS
Metal Film Resistors
Ambient Temperature (ºC)
Rated Load (%) 100
80
60
40
20
20 40 60 80 100 120 140 160 180
70ºC
ød
HLøD
DIMENSIONS
STYLE L øD H ød
FRM-25 6.3r0.5 2.4r0.2 28r2.0 0.6r0.05
FRM-50 9.0r0.5 3.3r0.3 26r2.0 0.6r0.05
FRM100 11.5r1.0 4.5r0.5 35r2.0 0.8r0.05
FRM200 15.5r1.0 5.0r0.5 33r2.0 0.8r0.05
POWER DERATING CURVE
For resistors operated in ambient temperatures above 70ºC , power rating
must be derated in accordance with the curve below.
FEATURES
Power Rating : 1/4W, 1/2W, 1W, 2W
Resistance tolerance : r5%
FlameProof Silicone Coating : UL94V-0
Gray body color
The 5th color band is white to represent fusible resistors
FUSING CHARACTERISTICS
Fusing time within 30 seconds at 16 times of rated power
Fusing residual resistive value at least 100 times rated resistance
Unit : mm
Fusible Type
Normal Style [ FRM Series ]
Note :
ELECTRICAL CHARACTERISTICS
PERFORMANCE STYLE TEST METHOD FRM-25 FRM-50 FRM100 FRM200
Power Rating at 70ºC 1/4W 1/2W 1W 2W
Dielectric Withstanding Voltage JIS-C-5202 5.7 in V-Block for 60 Seconds 250V 250V 350V 350V
Temperature Coefficient JIS-C-5202 5.2 Room Temp. Add 100ºC r200ppm/ºC
Short Time Overload JIS-C-5202 5.5 2.5 Times RCWV for 5 Seconds r2.0%+0.05:
Insulation Resistance JIS-C-5202 5.6 in V-Block >100M:
Pulse Overload JIS-C-5202 5.8 4 Times RCWV 10,000 Cycles r1.0%+0.05:
(1 Sec. on , 25 Sec. off )
Operating Temp. Range -55ºC to + 155ºC
Value Range 2.2: To 1K: for E24 Series
* Resistance range for standard resistance, below or over this resistance on request.
ENVIRONMENTAL CHARACTERISTICS
PERFORMANCE TEST TEST METHOD APPRAISE
Terminal Strength JIS-C-5202 6.1 Direct load for 10 Sec. in the Direction of the Terminal Leads t2.5kg (24.5N)
Resistance to Soldering Heat JIS-C-5202 6.4 350ºC r 10ºC for 3 r 0.5 Seconds r1.0%+0.05:
Solderability JIS-C-5202 6.5 235ºC r 5ºC for 5 r 0.5 Seconds 95% Min. Coverage
Resistance to Solvent JIS-C-5202 6.9 IPA for 1 Min. with Ultrasonic No Deterioration of
Coatings and Markings
Temperature Cycling JIS-C-5202 7.4 -55ºC➞Room Temp.➞+155ºC➞Room Temp. for 5 Cycles r2.0%+0.05:
Humidity JIS-C-5202 7.5 40r2ºC, 90~95% RH for 1,000 Hrs. r5.0%+0.05:
Load Life in Humidity JIS-C-5202 7.9 40r2ºC, 90~95% RH at RCW V for 1,000 Hrs. r5.0%+0.05:
(1.5 Hrs. on , 0.5 Hrs. off )
Load Life JIS-C-5202 7.10 70ºC at RCW V for 1,000 Hrs. (1.5 Hrs. on, 0.5 Hrs. off ) r5.0%+0.05:
Overload Flame Retardant JIS-C-5202 7.12 4 Times RCW V for 1 minute No evidence of
flaming or arcing
* Rated Continuous Working Voltage (RCW V)= Power Rating x Resistance Value
YAGEO CORPORATION LEADED RESISTORS
Metal Film Resistors
Ambient Temperature (ºC)
Rated Load (%) 100
80
60
40
20
20 40 60 80 100 120 140 160 180
70ºC
ød
HLøD
DIMENSIONS
STYLE L øD H ød
FRM50S 6.3r0.5 2.4r0.2 28r2.0 0.6r0.05
FRM1WS 9.0r0.5 3.3r0.3 26r2.0 0.6r0.05
FRM2WS 11.5r1.0 4.5r0.5 35r2.0 0.8r0.05
FRM3WS 15.5r1.0 5.0r0.5 33r2.0 0.8r0.05
POWER DERATING CURVE
For resistors operated in ambient temperatures above 70ºC , power
rating must be derated in accordance with the curve below.
FEATURES
Power Rating : 1/2W, 1W, 2W, 3W
Resistance tolerance : r5%
FlameProof Silicone Coating : UL94V-0
Pink body color
The 5th color band is white to represent fusible resistors
FUSING CHARACTERISTICS
Fusing time within 30 seconds at 16 times of rated power
Fusing residual resistive value at least 100 times rated resistance
Unit : mm
Fusible Type
Miniature Style [ FRM Series ]
Note :
ELECTRICAL CHARACTERISTICS
PERFORMANCE STYLE TEST METHOD FRM50S FRM1WS FRM2WS FRM3WS
Power Rating at 70ºC 1/2W 1W 2W 3W
Dielectric Withstanding Voltage JIS-C-5202 5.7 in V-Block for 60 Seconds 250V 250V 350V 350V
Temperature Coefficient JIS-C-5202 5.2 Room Temp. Add 100ºC r200ppm/ºC
Short Time Overload JIS-C-5202 5.5 2.5 Times RCWV for 5 Seconds r2.0%+0.05:
Insulation Resistance JIS-C-5202 5.6 in V-Block >100M:
Pulse Overload JIS-C-5202 5.8 4 Times RCWV 10,000 Cycles r2.0%+0.05:
(1 Sec. on , 25 Sec. off )
Operating Temp. Range -55ºC to + 155ºC
Value Range 2.2: To 1K: for E24 Series
* Resistance range for standard resistance, below or over this resistance on request.
ENVIRONMENTAL CHARACTERISTICS
PERFORMANCE TEST TEST METHOD APPRAISE
Terminal Strength JIS-C-5202 6.1 Direct load for 10 Sec. in the Direction of the Terminal Leads t2.5kg (24.5N)
Resistance to Soldering Heat JIS-C-5202 6.4 350ºC r 10ºC for 3 r 0.5 Seconds r1.0%+0.05:
Solderability JIS-C-5202 6.5 235ºC r 5ºC for 5 r 0.5 Seconds 95% Min. Coverage
Resistance to Solvent JIS-C-5202 6.9 IPA for 1 Min. with Ultrasonic No Deterioration of
Coatings and Markings
Temperature Cycling JIS-C-5202 7.4 -55ºC➞Room Temp.➞+155ºC➞Room Temp. for 5 Cycles r2.0%+0.05:
Humidity JIS-C-5202 7.5 40r2ºC, 90~95% RH for 1,000 Hrs. r5.0%+0.05:
Load Life in Humidity JIS-C-5202 7.9 40r2ºC, 90~95% RH at RCW V for 1,000 Hrs. r5.0%+0.05:
(1.5 Hrs. on , 0.5 Hrs. off )
Load Life JIS-C-5202 7.10 70ºC at RCW V for 1,000 Hrs. (1.5 Hrs. on, 0.5 Hrs. off ) r5.0%+0.05:
Overload Flame Retardant JIS-C-5202 7.12 4 Times RCW V for 1 minute No evidence of
flaming or arcing
* Rated Continuous Working Voltage (RCW V)= Power Rating x Resistance Value
YAGEO CORPORATION LEADED RESISTORS
DIMENSIONS
STYLE L W H ød
SQP200 18r1.0 6.5r1.0 6.5r1.0 0.8r0.05
SQP300 22r1.5 8.0r1.0 8.0r1.0 0.8r0.05
SQP500 22r1.5 9.5r1.0 9.0r1.0 0.8r0.05
SQP700 35r1.5 9.5r1.0 9.0r1.0 0.8r0.05
SQP10A 48r1.5 9.5r1.0 9.0r1.0 0.8r0.05
SQP15A 48r1.5 12.5r1.5 12.5r1.5 1.0r0.05
SQP20A 60r2.0 12.5r1.5 12.5r1.5 1.0r0.05
Cement Resistors AXIAL LEAD TYPE
Standard Type[SQP Series], Non-Inductive Type[NSP Series]
Unit : mm
INTRODUCTION
• The materials used and the construction
techniques ensure excellent flame resistance,
arc resistance and moisture resistances as
well as self-extinguishing capabilities. They
will withstand the most rigorous loading test
• As resistors in radio and television receivers,
the hazardous conditions of smoking and
redheat can be completely prevented by the
proper choice of power resistors
ød
38r3. L
H
TEMPERATURE RISE
Temperature Rise (ºC)
Rated Load (%)
FEATURES
Exceptionally Small and Sturdy; Mechanically Safe. Excellent Electrical Characteristics
Resistance Tolerance: r5%
Applicable Specifications: EIA RS-344 and EIA RC-649
DERATING CURVE
Ambient Temperature (ºC)
Rated Load (%)
W
38r3.
100
80
60
40
20
0
-50 0 50 100 150 200 250 300
25 40 70 155 275
3W-5W
7W-10W
15W-20W
2W
20W
15W
10W
7W
5W
3W
2W
0 20 40 60 80 100 120
250
200
150
100
50
0
Note :
ELECTRICAL CHARACTERISTICS
STYLE SQP200 SQP300 SQP500 SQP700 SQP10A SQP15A SQP20A
Power Rating 2W 3W 5W 7W 10W 15W 20W
Operating Temp. Range -55ºC to +155ºC
Maximum Working Voltage 250V 350V 350V 500V 500V 500V 500V
Maximum Overload Voltage 500V 700V 700V 1000V 1000V 1000V 1000V
Dielectric Withstanding Voltage 500V 700V 700V 1000V 1000V 1000V 1000V
Value Range r5% (Wirewound) 0.15:~100:0.3:~120:0.3:~180:0.5:~220:1:~270:
Value Range r5% (Metal Oxide Film) 110:~10K:130:~22K:200:~33K:240:~10K:300:~10K:
Temperature Coefficient r300ppm/ºC
* 1. Standard resistance is as the above list, below or over this resistance on request.
* 2. Non-Inductive type up to 50: only.
ENVIRONMENTAL CHARACTERISTICS
PERFORMANCE TEST TEST METHOD APPRAISE
Short Time Overload JIS-C-5202 5.5 2.5 Times RCW V for 5 Seconds r(2%+0.05:)
Dielectric Withstanding Voltage JIS-C-5202 5.7 in V-Block for 60 Seconds by Type
Temperature Coefficient of Resistance JIS-C-5202 5.2 -55ºC to +155ºC r300ppm/ºC
Insulation Resistance JIS-C-5202 5.6 in V-Block >100M:
Solderability JIS-C-5202 6.5 235ºC for 5r0.5 Seconds 95% Min. Coverage
Resistance to Solvent JIS-C-5202 6.9 IPA for 1 Min. with Ultrasonic No Deterioration of
Coatings and Markings
Terminal Strength Direct Load for 10 Sec. in The Direction of The Terminal Leads t2.5kg (24.5N)
Pulse Overload JIS-C-5202 5.8 4 Times RCW V 10000 Cycles (1 Sec. on , 25 Sec. off) r(2%+0.05:)
Load Life in Humidity JIS-C-5202 7.9 40r2ºC, 90~95% RH at RCW V for 1000 Hrs. r(5%+0.05:)
(1.5 Hrs. on , 0.5 Hrs. off )
Load Life JIS-C-5202 7.10 70ºC at RCW V for 1000 Hrs. (1.5 Hrs. on , 0.5 Hrs. off) r(5%+0.05:)
Temperature Cycling JIS-C-5202 7.4 -55ºC➞Room Temp.➞+155ºC➞Room Temp. for 5 Cycles r(2%+0.05:)
Resistance to Soldering Heat JIS-C-5202 6.4 350ºCr10ºC for 3r0.5 Seconds r(1%+0.05:)
* Rated Continuous Working Voltage (RCW V)= Power Rating x Resistance Value
YAGEO CORPORATION LEADED RESISTORS
DIMENSIONS
STYLE H W S
SQM200 20r1.5 11.0r1.0 7.0r1.0
SQM300 25r1.5 12.0r1.0 8.0r1.0
SQM500 25r1.5 13.0r1.0 9.0r1.0
SQM700 39r1.5 13.0r1.0 9.0r1.0
SQM10A 35r1.5 16.0r1.0 12.0r1.0
Cement Resistors VERTICAL LEAD TYPE
Standard Type[SQM Series], Non-Inductive Type[NSM Series]
Unit : mm
INTRODUCTION
• The materials used and the construction
techniques ensure excellent flame resistance,
arc resistance and moisture resistances as
well as self-extinguishing capabilities. They
will withstand the most rigorous loading test
• As resistors in radio and television receivers,
the hazardous conditions of smoking and
redheat can be completely prevented by the
proper choice of power resistors
Ø0.8r0.05
L
H
TEMPERATURE RISE
Temperature Rise (ºC)
Rated Load (%)
FEATURES
Space Saving Stand-Off Type
Small Size, High Power Capacity
Resistance Tolerance: r5%
Completely Unflamable
DERATING CURVE
Ambient Temperature (ºC)
Rated Load (%)
W
3.5r1
S
7.5+2
-1
5+2
-1 (10WS)
40 70 155 275
3W-5W
7W-10W
100
80
60
40
20
0
-50 0 50 100 150 200 250 300
2W
10W
7W
5W
3W
2W
0 20 40 60 80 100 120
250
200
150
100
50
0
Note :
ELECTRICAL CHARACTERISTICS
STYLE SQM200 SQM300 SQM500 SQM700 SQM10A
Power Rating 2W 3W 5W 7W 10W
Operating Temp. Range -55ºC to +155ºC
Maximum Working Voltage 250V 350V 350V 500V 500V
Maximum Overload Voltage 500V 700V 700V 1000V 1000V
Dielectric Withstanding Voltage 500V 700V 700V 1000V 1000V
Value Range r5% (Ceramic Core) 0.15:~100:0.24:~120:0.3:~180:0.51:~220:1:~270:
Value Range r5% (Metal Oxide Film) 110:~10K:130:~22K:200:~33K:240:~10K:300:~10K:
Temperature Coefficient r300ppm/ºC
* 1. Standard resistance is as the above list, below or over this resistance on request.
* 2. Non-Inductive type up to 50: only.
ENVIRONMENTAL CHARACTERISTICS
PERFORMANCE TEST TEST METHOD APPRAISE
Short Time Overload JIS-C-5202 5.5 2.5 Times RCW V for 5 Seconds r(2%+0.05:)
Dielectric Withstanding Voltage JIS-C-5202 5.7 in V-Block for 60 Seconds by Type
Temperature Coefficient of Resistance JIS-C-5202 5.2 -55ºC to +155ºC r300ppm/ºC
Insulation Resistance JIS-C-5202 5.6 in V-Block >100M:
Solderability JIS-C-5202 6.5 235ºC for 5r0.5 Seconds 95% Min. Coverage
Resistance to Solvent JIS-C-5202 6.9 IPA for 1 Min. with Ultrasonic No Deterioration of
Coatings and Markings
Terminal Strength Direct Load for 10 Sec. in The Direction of The Terminal Leads t2.5kg (24.5N)
Pulse Overload JIS-C-5202 5.8 4 Times RCW V 10000 Cycles (1 Sec. on , 25 Sec. off) r(2%+0.05:)
Load Life in Humidity JIS-C-5202 7.9 40r2ºC, 90~95% RH at RCW V for 1000 Hrs. r(5%+0.05:)
(1.5 Hrs. on , 0.5 Hrs. off )
Load Life JIS-C-5202 7.10 70ºC at RCW V for 1000 Hrs. (1.5 Hrs. on , 0.5 Hrs. off) r(5%+0.05:)
Temperature Cycling JIS-C-5202 7.4 -55ºC➞Room Temp.➞+155ºC➞Room Temp. for 5 Cycles r(2%+0.05:)
Resistance to Soldering Heat JIS-C-5202 6.4 350ºCr10ºC for 3r0.5 Seconds r(1%+0.05:)
* Rated Continuous Working Voltage (RCW V)= Power Rating x Resistance Value
YAGEO CORPORATION LEADED RESISTORS
DIMENSIONS
STYLE
LHWSH
1H2P1P2P3P4
SQZ300 24.0r1.5 9.0r1 9.0r1 12.5r124.0r1 9.5r1.0 4.0r0.2 2.0r0.2 5.0r0.2 1.4r0.1
SQZ500 27.0r1.5 9.5r1 9.5r1 15.0r124.0r1 9.5r1.0 4.0r0.2 2.0r0.2 5.0r0.2 1.4r0.1
SQZ700 35.0r1.5 9.5r1 9.5r1 22.5r124.0r1 9.5r1.0 4.0r0.2 2.0r0.2 5.0r0.2 1.4r0.1
SQZ10A 48.0r1.5 9.5r1 9.5r1 32.5r124.0r1 9.5r1.0 4.0r0.2 2.0r0.2 5.0r0.2 1.4r0.1
SQZ15A 48.0r1.5 12.5r112.5r1 35.0r134.5r1 15.0r1.5 7.0r0.2 6.0r0.2 10.0r0.2 2.7r0.1
SQZ20A 63.5r2.0 12.5r112.5r1 50.0r134.5r1 15.0r1.5 7.0r0.2 6.0r0.2 10.0r0.2 2.7r0.1
Cement Resistors
RADIAL TERMINALS
TYPE
Standard Type[SQZ Series], Non-Inductive Type[NSZ Series]
Unit : mm
INTRODUCTION
• The materials used and the construction
techniques ensure excellent flame resistance
arc resistance and moisture resistances as
well as self-extinguishing capabilities. They
will withstand the most rigorous loading test
• As resistors in radio and television receivers,
the hazardous conditions of smoking and
redheat can be completely prevented by the
proper choice of power resistors
H
1
FEATURES
Space Saving Stand-Off Type
Resistance Tolerance: r5%
Completely Unflamable
W
H
2
P2
P
1
P4
P3
S
L
0.5
TEMPERATURE RISE
Temperature Rise (ºC)
Rated Load (%)
DERATING CURVE
Ambient Temperature (ºC)
Rated Load (%)
H
40 70 155 275
5W-10W
15W-20W
100
80
60
40
20
0-50 0 50 100 150 200 250 300
2W
20W
15W
10W
7W
5W
3W
0 20 40 60 80 100 120
250
200
150
100
50
0
Note :
ELECTRICAL CHARACTERISTICS
STYLE SQZ300 SQZ500 SQZ700 SQZ10A SQZ15A SQZ20A
Power Rating 3W 5W 7W 10W 15W 20W
Operating Temp. Range -55ºC to +155ºC
Maximum Working Voltage 250V 350V 500V 500V 500V 500V
Maximum Overload Voltage 500V 700V 1000V 1000V 1000V 1000V
Dielectric Withstanding Voltage 500V 700V 1000V 1000V 1000V 1000V
Value Range r5% (Ceramic Core) 0.22:~120:0.47:~180:0.68:~220:1:~270:
Value Range r5% (Metal Oxide Film) 130:~22K:200:~33K:240:~10K:300:~10K:
Temperature Coefficient r300ppm/ºC
* 1. Standard resistance is as the above list, below or over this resistance on request.
* 2. Non-Inductive type up to 50: only.
ENVIRONMENTAL CHARACTERISTICS
PERFORMANCE TEST TEST METHOD APPRAISE
Short Time Overload JIS-C-5202 5.5 2.5 Times RCW V for 5 Seconds r(2%+0.05:)
Dielectric Withstanding Voltage JIS-C-5202 5.7 in V-Block for 60 Seconds by Type
Temperature Coefficient of Resistance JIS-C-5202 5.2 -55ºC to +155ºC r300ppm/ºC
Insulation Resistance JIS-C-5202 5.6 in V-Block >100M:
Solderability JIS-C-5202 6.5 235ºC for 5r0.5 Seconds 95% Min. Coverage
Resistance to Solvent JIS-C-5202 6.9 IPA for 1 Min. with Ultrasonic No Deterioration of
Coatings and Markings
Terminal Strength Direct Load for 10 Sec. in The Direction of The Terminal Leads t2.5kg (24.5N)
Pulse Overload JIS-C-5202 5.8 4 Times RCW V 10000 Cycles (1 Sec. on , 25 Sec. off) r(2%+0.05:)
Load Life in Humidity JIS-C-5202 7.9 40r2ºC, 90~95% RH at RCW V for 1000 Hrs. r(5%+0.05:)
(1.5 Hrs. on , 0.5 Hrs. off )
Load Life JIS-C-5202 7.10 70ºC at RCW V for 1000 Hrs. (1.5 Hrs. on , 0.5 Hrs. off) r(5%+0.05:)
Temperature Cycling JIS-C-5202 7.4 -55ºC➞Room Temp.➞+155ºC➞Room Temp. for 5 Cycles r(2%+0.05:)
Resistance to Soldering Heat JIS-C-5202 6.4 350ºCr10ºC for 3r0.5 Seconds r(1%+0.05:)
* Rated Continuous Working Voltage (RCW V)= Power Rating x Resistance Value
YAGEO CORPORATION LEADED RESISTORS
STYLE
LH WSH
1H2P1P2P3P4
SQH10A 48.0r1.5 10.5r1.0 10.5r1 33.0r2 19.5r1.0 4.0 11.0r0.2 6.0 8.0 3.0
SQH15A 48.0r1.5 12.5r1.0 12.0r1 33.0r2 20.5r1.0 4.0 11.0r0.2 6.0 8.0 3.0
SQH20A 63.5r2.0 12.5r1.0 12.5r1 48.0r2 20.5r1.0 4.0 11.0r0.2 6.0 8.0 3.0
SQH25A 63.5r2.0 16.0r1.0 16.0r1 46.0r2 28.0r1.5 4.2 11.0r0.2 6.0 10.0 3.0
SQH30A 70.0r2.0 19.0r1.5 18.0r1 56.0r2 28.0r1.5 4.2 18.0r0.2 8.0 10.0 3.0
SQH40A 90.0r2.5 19.0r1.5 18.0r1 71.0r2 28.0r1.5 4.2 18.0r0.2 8.0 10.0 3.0
Cement Resistors
CLAMP MOUNTING
TYPE
Standard Type[SQH Series], Non-Inductive Type[NSH Series]
Unit : mm
FEATURES
Low Cost
Small Size, High Power Capacity
Resistance Tolerance: r5%, r10%
Completely Unflamable
TEMPERATURE RISE
Temperature Rise (ºC)
Rated Load (%)
DERATING CURVE
Ambient Temperature (ºC)
Rated Load (%)
DIMENSIONS
L
P4
SQH2 Type
SQH1 Type
S
W
H1
H
ø0.25
d
P2
P
1
P
4
2.2
ø0.25
2.2
d
W
P
2
P
3
P1
S
L
0.7
H
1
0.5 6
H
2
25 40 70 155 275
10W
15W-40W
100
80
60
40
20
0-50 0 50 100 150 200 250 300
40W
30W
20W, 25W
10W, 15W
0 20 40 60 80 100 120
250
200
150
100
50
0
Note :
ELECTRICAL CHARACTERISTICS
STYLE SQH10A SQH15A SQH20A SQH25A SQH30A SQH40A
Power Rating 10W 15W 20W 25W 30W 40W
Operating Temp. Range -55ºC to +155ºC
Maximum Working Voltage 250V 350V 500V 500V 500V 500V
Maximum Overload Voltage 500V 700V 1000V 1000V 1000V 1000V
Dielectric Withstanding Voltage 1000V 1000V 1000V 1000V 1000V 1000V
Value Range r5% (Ceramic Core) 0.39:~270:0.39:~300:0.51:~300:0.51:~1K:0.62:~1K:0.62:~1K:
Value Range r5% (Metal Oxide Film) 300:~10K:330:~10K:
Temperature Coefficient r300ppm/ºC
* 1. Standard resistance is as the above list, below or over this resistance on request.
* 2. Non-Inductive type up to 50: only.
ENVIRONMENTAL CHARACTERISTICS
PERFORMANCE TEST TEST METHOD APPRAISE
Short Time Overload JIS-C-5202 5.5 2.5 Times RCW V for 5 Seconds r(2%+0.05:)
Dielectric Withstanding Voltage JIS-C-5202 5.7 in V-Block for 60 Seconds by Type
Temperature Coefficient of Resistance JIS-C-5202 5.2 -55ºC to +155ºC r300ppm/ºC
Insulation Resistance JIS-C-5202 5.6 in V-Block >100M:
Solderability JIS-C-5202 6.5 235ºC for 5r0.5 Seconds 95% Min. Coverage
Resistance to Solvent JIS-C-5202 6.9 IPA for 1 Min. with Ultrasonic No Deterioration of
Coatings and Markings
Terminal Strength Direct Load for 10 Sec. in The Direction of The Terminal Leads t2.5kg (24.5N)
Pulse Overload JIS-C-5202 5.8 4 Times RCW V 10000 Cycles (1 Sec. on , 25 Sec. off) r(2%+0.05:)
Load Life in Humidity JIS-C-5202 7.9 40r2ºC, 90~95% RH at RCW V for 1000 Hrs. r(5%+0.05:)
(1.5 Hrs. on , 0.5 Hrs. off )
Load Life JIS-C-5202 7.10 70ºC at RCW V for 1000 Hrs. (1.5 Hrs. on , 0.5 Hrs. off) r(5%+0.05:)
Temperature Cycling JIS-C-5202 7.4 -55ºC➞Room Temp.➞+155ºC➞Room Temp. for 5 Cycles r(2%+0.05:)
Resistance to Soldering Heat JIS-C-5202 6.4 350ºCr10ºC for 3r0.5 Seconds r(1%+0.05:)
* Rated Continuous Working Voltage (RCW V)= Power Rating x Resistance Value
Note :
PACKING METHODS
STYLE DIMENSIONS
Normal Miniature a A B1-B2 S (Spacing) T (Max. Deviation of Spacing)
TYPE-12 TYPE25S 6r0.5 52.4r1.5 1.2 5
26.0r1.5
TYPE-25 TYPE50S 6r0.5 52.4r1.5 1.2 5
26.0r1.5 1.0
TYPE-50 TYPE1WS 6r0.5 52.4r1.5 1.2 5 1mm Per 10 Spacings, 0.5mm Per 5 Spacings
TYPE100 TYPE2WS 6r0.5 73.0r1.5 1.5 5
52.4r1.5
TYPE200 TYPE3WS 6r0.5 73.0r1.5 1.5 10
KNP300 KNP5WS 52.4r1.5
RSF300 RSF5WS 6r0.5 91.0r1.5 1.5 10
RSF500/KNP500 KNP7WS 73.0r1.5
STYLE TAPE ON REEL TAPE ON BOX
Normal Miniature Across Flange (A) QTY Per Reel W( A) H (B) L (C) QTY Per Box
TYPE-12 TYPE25S 72 5,000 78/81 24/70 260 2,000/5,000
TYPE-25 TYPE50S 48/72 5,000 78/81 24/104 260 1,000/5,000
TYPE-50 TYPE1WS 72 2,500 73 45 258 1,000
TYPE100 TYPE2WS 95 2,000 103 78 260 1,000
TYPE200 TYPE3WS 95 1,000 103 94 260 1,000
KNP300 KNP5WS 95 1,000 103 78 260 500
RSF300/500 KNP500
RSF5WS/KNP7WS
95 250 116 79 255 250
Unit : mm/pcs
TAPE ON REEL PACKING TAPE ON BOX PACKING
Bandoliers can be reeled;
dimension a differ with type.
“Ammopack” is an abbreviation of “ammunition packing”
The dimensions of A-B-C vary with type and quantity.
Bandoliers may also be supplied in
a cardboard box (“ammopack”).
Sr0.1
B2
B1
A
a
1Max.
0+1.6
-0
0.8 Max. Displacement between
any Two Resistors
22º30’(16X)
300mm Leader at
Beginning and End
(1) Resistor
(2) Bandolier
(3) Paper
(4) Flange
(5) Cylinder
(1)
(3)
(2)
(4)
51
15
305
3
A
(5) 22.5
Bandolier for Axial Leads
The resistors are supplied on bandolier; either 1000 resistors in
ammopack or 5000 resistors on reel.
Unit : mm
B
A
C
Note :
SPECIAL TYPE (FORMING DIMENSIONS)
M TYPE
STYLE DIMENSIONS
Normal Miniature L P øD ød H
TYPE-12 TYPE25S 3.4r0.3 6.0r1 1.9r0.2 0.5r0.05 10.0r1
TYPE-25 TYPE 50S 6.3r0.5 10.0r1 2.4r0.2 0.6r0.05 10.0r1
TYPE-50 TYPE1WS 9.0r0.5 12.5r1 3.3r0.3 0.6r0.05 10.0r1
TYPE100 TYPE2WS 11.5r1.0 15.0r1 4.5r0.5 0.8r0.05 12.5r1
TYPE200 TYPE3WS 15.5r1.0 20.0r1 5.0r0.5 0.8r0.05 15.0r1
STYLE DIMENSIONS
Normal Miniature L P øD ød H1H2t
TYPE-25 TYPE50S 6.3r0.5 10.0r1 2.4r0.2 0.6r0.05 6.0r1 5.0r1 1.2r0.2
TYPE-50 – 9.0r0.5 12.5r1 3.3r0.3 0.6r0.05 6.0r1 5.0r1 1.2r0.2
– TYPE1WS 9.0r0.5 12.5r1 3.3r0.3 0.8r0.05 6.0r1 5.0r1 1.4r0.2
TYPE100 TYPE2WS 11.5r1.0 15.0r1 4.5r0.5 0.8r0.05 6.0r1 5.0r1 1.4r0.2
TYPE200 TYPE3WS 15.5r1.0 20.0r1 5.0r0.5 0.8r0.05 10.0r1 5.0r1 1.4r0.2
TYPE300 TYPE5WS 24.5r1.0 30.0r1 8.0r0.5 0.8r0.05 15.0r1 5.0r1 1.4r0.2
TYPE500 – 24.5r1.0 30.0r1 8.0r0.5 0.8r0.05 15.0r1 5.0r1 1.4r0.2
ød
H
L
P
øD
0-3.0
Unit : mm
Unit : mm
ød
H1
L
P
H2
øD
0-3.0
MB TYPE
t
Note :
MR TYPE
STYLE DIMENSIONS
Normal Miniature L P F øD ød H1H2
TYPE-50 TYPE1WS 9.0r0.5 14.5r1 7.0r0.5 3.3r0.3 0.6r0.05 7.0r1 5.0r1
TYPE100 TYPE2WS 11.5r1.0 17.5r1 7.0r0.5 4.5r0.5 0.8r0.05 8.0r1 5.0r1
TYPE200 TYPE3WS 15.5r1.0 21.5r1 7.0r0.5 5.0r0.5 0.8r0.05 9.0r1 5.0r1
Unit : mm
0-3.0
øD
L
H1
H2
F
P
ød
FK TYPE
STYLE DIMENSIONS
Normal Miniature L P øD ød h H Max. h1H1Max. E Max.
TYPE100 TYPE2WS 11.5r16r1 4.5r0.5 0.8r0.05 10.0r1 25 5.0r1 20 3.5
TYPE200 TYPE3WS 15.5r16r1 5.0r0.5 0.8r0.05 10.0r1 30 5.0r1 25 3.5
Unit : mm
FFK TYPE FKK TYPE
øD
E
L
h
H
ød
P
øD
E
L
h
H
ød
P
øD
E
L
h
H
ød
P
*TYPE-25/50S is available.
F TYPE
øD
H1
P
ød
h1
L
E
Note :
AV Type Forming for Taping
Rated Watts 1/4W & 1/2WS
Body Dimension : L = 6.3r0.5mm
øD = 2.4r0.2mm
Rated Watts : 1/2W & 1WS
Body Dimension : L = 9r0.5mm
øD = 3.3r0.3mm
PN Type Forming for Taping
Rated Watts 1/4W & 1/2WS
Body Dimension : L = 6.3r0.5mm
øD = 2.4r0.2mm
Rated Watts : 1/2W & 1WS
Body Dimension : L = 9r0.5mm
øD = 3.3r0.3mm
12.7r0.5
5.0r0.5
12.7r0.3
4.0r0.3
-0.5
18.0
+1.0
-0
16.0
+1.0
1 Max.
12.7r0.5
5.0r0.5
12.7r0.3
1 Max.
4.0r0.3
-0.5
18.0
+1.0
-0
16.0
+1.0
FT Type Forming for Taping
Rated Watts 1/4W & 1/2WS
Body Dimension : L = 6.3r0.5mm
øD = 2.4r0.2mm
Rated Watts : 1/2W & 1WS
Body Dimension : L = 9r0.5mm
øD = 3.3r0.3mm
MT Type Forming for Taping
Rated Watts 1/6W & 1/4WS
Body Dimension : L = 3.4r0.3mm
øD = 1.9r0.2mm
12.7r0.5
5.0r0.5
12.7r0.3
4.0r0.3
-0.5
18.0
+1.0
-0
16.0
+1.0
1 Max.
12.7r0.3
6.35r1.0
5.0+0.4
-0.2
5.0r0.5
12.7r0.3
0.45 or 0.5
4.0r0.3
-0.5
18.0
+1.0
20.0
+0.5
-0
Note :
EXPLANATIONS OF ORDERING CODE
For Leaded Resistor
Explanations of Ordering Code
CODE 4~6
Power Rating
-12=1/6W 3WM=3WM 900=9W 90A=90W
-25=1/4W 400=4W 10A=10W 10B=100W
25S=1/4WS 4WS=4WS 10S=10WS 15B=150W
-50=1/2W 500=5W 15A=15W 20B=200W
50S=1/2WS 5WS=5WS 20A=20W 10C=1000W
100=1W 5SS=5SS 30A=30W 204=0.4W
1WS=1WS 600=6W 40A=40W 207=0.6W
200=2W 6WS=6WS 50A=50W
2WS=2WS 700=7W 60A=60W
300=3W 7WS=7WS 70A=70W
3WS=3WS 800=8W 80A=80W
Code 7
Resistance Tolerance
B=r0.1%
C=r0.25%
D= r0.5%
F=r1%
G= r2%
J=r5%
K=r10%
Code 8
Packing Style
T = Tape on Box Packing
R = Paper Tape Reel
B = Bulk Packing
Code 9
Temperature Coefficient
of Resistance
A=r5ppm/ºC G = r200ppm/ºc
B=r10ppm/ºC H = r250ppm/ºc
C=r15ppm/ºC I = r300ppm/ºc
D= r25ppm/ºC J = r350ppm/ºc
E=r50ppm/ºC –= Base on Spec.
F=r100ppm/ºC
Code 10~11
Special Type
See Following Table
Code 4~6
Power Rating
See Following
Ta b l e
Code 1~3
Series Name
See Index
Code 12~23
Resistance Value
for Example
0R1 1K
1R 10K
10R 100K
100R 1M
10M
CODE 10~11
Special Type
26–=26mm FKK=FKK-Type Forming for Bulk
52–=52.4mm PN=PANAsert for Taping
73–=73mm AV=AVIsert for Taping
81–=81mm MT=M-Type Forming for Taping
91–=91mm FT=F-Type Forming for Taping
M=M-Type Forming for Bulk
MB=MB-Type Forming for Bulk
MR=MR-Type Forming for Bulk
F=F-Type Forming for Bulk
FK=FK-Type Forming for Bulk
FFK=FFK-Type Forming for Bulk
100R52–
F
T
F
-12
MFR
4-BAND-CODE
2%, 5%, 10% 560K:r5%
5-BAND-CODE
0.1%, 0.25%, 0.5%, 1% 237:r1%
0.1% 2% 0.1% 2% 0.1% 2% 0.1% 2% 0.1% 2% 0.1% 2%
0.25% 1% 5% 0.25% 1% 5% 0.25% 1% 5% 0.25% 1% 5% 0.25% 1% 5% 0.25% 1% 5%
0.5% 10% 0.5% 10% 0.5% 10% 0.5% 10% 0.5% 10% 0.5% 10%
1
0.0 10.0 10 14.7 14.7 – 21.5 21.5 – 31.6 31.6 – 46.4 46.4 – 68.1 68.1 68
10.1 – – 14.9 – – 21.8 – – 32.0 – – 47.0 – 47 69.0 – –
10.2 10.2 – 15.0 15.0 15 22.1 22.1 22 32.4 32.4 – 47.5 47.5 – 69.8 69.8 –
10.4 – – 15.2 – – 22.3 – – 32.8 – – 48.1 – – 70.6 – –
10.5 10.5 – 15.4 15.4 – 22.6 22.6 – 33.2 33.2 33 48.7 48.7 – 71.5 71.5 –
10.6 – – 15.6 – – 22.9 – – 33.6 – – 49.3 – – 72.3 – –
10.7 10.7 – 15.8 15.8 – 23.2 23.2 – 34.0 34.0 – 49.9 49.9 – 73.2 73.2 –
10.9 – – 16.0 – 16 23.4 – – 34.4 – – 50.5 – – 74.1 – –
11.0 11.0 11 16.2 16.2 – 23.7 23.7 – 34.8 34.8 – 51.1 51.1 51 75.0 75.0 75
11.1 – – 16.4 – – 24.0 – 24 35.2 – – 51.7 – – 75.9 – –
11.3 11.3 – 16.5 16.5 – 24.3 24.3 – 35.7 35.7 – 52.3 52.3 – 76.8 76.8 –
11.4 – – 16.7 – – 24.6 – – 36.1 – 36 53.0 – – 77.7 – –
11.5 11.5 – 16.9 16.9 – 24.9 24.9 – 36.5 36.5 – 53.6 53.6 – 78.7 78.7 –
11.7 – – 17.2 – – 25.2 – – 37.0 – – 54.2 – – 79.6 – –
11.8 11.8 – 17.4 17.4 – 25.5 25.5 – 37.4 37.4 – 54.9 54.9 – 80.6 80.6 –
12.0 – 12 17.6 – – 25.8 – – 37.9 – – 55.6 – – 81.6 – –
12.1 12.1 – 17.8 17.8 – 26.1 26.1 – 38.3 38.3 – 56.2 56.2 56 82.5 82.5 82
12.3 – – 18.0 – 18 26.4 – – 38.8 – – 56.9 – – 83.5 – –
12.4 12.4 – 18.2 18.2 – 26.7 26.7 – 39.2 39.2 39 57.6 57.6 – 84.5 84.5 –
12.6 – – 18.4 – – 27.1 – 27 39.7 – – 58.3 – – 85.6 – –
12.7 12.7 – 18.7 18.7 – 27.4 27.4 – 40.2 40.2 – 59.0 59.0 – 86.6 86.6 –
12.9 – – 18.9 – – 27.7 – – 40.7 – – 59.7 – – 87.6 – –
13.0 13.0 13 19.1 19.1 – 28.0 28.0 – 41.2 41.2 – 60.4 60.4 – 88.7 88.7 –
13.2 – – 19.3 – – 28.4 – – 41.7 – – 61.2 – – 89.8 – –
13.3 13.3 – 19.6 19.6 – 28.7 28.7 – 42.2 42.2 – 61.9 61.9 62 90.9 90.9 91
13.5 – – 19.8 – – 29.1 – – 42.7 – – 62.6 – – 92.0 – –
13.7 13.7 – 20.0 20.0 20 29.4 29.4 – 43.2 43.2 43 63.4 63.4 – 93.1 93.1 –
13.8 – – 20.3 – – 29.8 – – 43.7 – – 64.2 – – 94.2 – –
14.0 14.0 – 20.5 20.5 – 30.1 30.1 30 44.2 44.2 – 64.9 64.9 – 95.3 95.3 –
14.2 – – 20.8 – – 30.5 – – 44.8 – – 65.7 – – 96.5 – –
14.3 14.3 – 21.0 21.0 – 30.9 30.9 – 45.3 45.3 – 66.5 66.5 – 97.6 97.6 –
14.5 – – 21.3 – – 31.2 – – 45.9 – – 67.3 – – 98.8 – –
E-192 E-96 E-24 E-192 E-96 E-24 E-192 E-96 E-24 E-192 E-96 E-24 E-192 E-96 E-24 E-192 E-96 E-24
STANDARD RESISTANCE VALUES FOR THE 10-TO-100 DECADE
(Also Usable in Decade Multiples or Sub-Multiples)
RESISTANCE TOLERANCE (r%)
COLOR 1ST BAND 2ND BAND 3RD BAND MUL TIPLIER TOLERANCE
BLACK 0001:
BROWN 11110:r1% (F)
RED 2 2 2 100:r2% (G)
ORANGE 3 3 3 1K:
YELLOW 4 4 4 10K:
GREEN 5 5 5 100K:r0.5% (D)
BLUE 6661M:r0.25% (C)
VIOLET 7 7 7 10M:r0.10% (B)
GREY 8 8 8 r0.05%
WHITE 9 9 9
GOLD 0.1 r5% ( J )
SILVER 0.01 r10% (K)
