Wire Bondable Voltage Divider Network DSOT Series * Tight TCR tracking * Extremely small footprint * Precision ratio tolerances to 0.05% * Ultra-stable tantalum nitride resistors IRC's TaNSil(R) voltage divider networks are ideally suited for low cost divider applications that demand precision performance in a wire bondable package. The tantalum nitride film system on silicon provides precision tolerance, exceptional TCR tracking and miniature physical dimensions. Excellent performance in harsh, humid environments is a trademark of IRC's selfpassivating TaNSil(R) resistor film. For applications requiring high performance voltage dividers in a miniature, wire bondable package, specify IRC DSOT wire bondable die. Electrical Data TCR/Inspection Code Table Resistance Range Each Resistor 10 to 500K Resistance Range Each Package to 1.0M Absolute Tolerance to 0.1% Ratio Tolerance to R1 to 0.05% Absolute TCR to 25ppm/C Tracking TCR to 5ppm/C Element Power Rating 125mW @70C Package Power Rating 250mW @ 70C Rated Operating Voltage (not to exceed P x R) 100V Operating Temperature Commercial Code MIL Inspection Code* 300ppm/C 00 04 100ppm/C 01 05 50ppm/C 02 06 25ppm/C 03 07 *Notes: Product supplied to Class H of MIL-PRF 38534 include 100% visual inspection Power Derating Data -55C to + 150C Noise <-30dB Oxidized Silicon (10KA SiO2 minimum) Substrate Material 0.0095 0.001 (0.241mm 0.025) Substrate Thickness Bond Pad Metallization Absolute TCR Aluminum 10KA minimum Gold 15KA minimum Backside Passivation Silicon (gold available) Silicon Dioxide or Silicon Nitride General Note IRC reserves the right to make changes in product specification without notice or liability. All information is subject to IRC's own data and is considered accurate at time of going to print. (c) IRC Advanced Film Division * 4222 South Staples Street * Corpus Christi Texas 78411 USA Telephone: 361 992 7900 * Facsimile: 361 992 3377 * Website: www.irctt.com A subsidiary of TT electronics plc DSOT Series Issue January 2009 Sheet 1 of 3 Wire Bondable Voltage Divider Network Manufacturing Capabilities Data Resistance Range Available Absolute Tolerances Available Ratio Tolerances Best Absolute TCR Tracking TCR 10 - 50 F G J K D F G J K 100ppm/C 50ppm/C 51 - 100 D F G J K C D F G J K 100ppm/C 25ppm/C 101 - 200 C DF G J K B C D F G J K 50ppm/C 10ppm/C 201 - 500 B C D F G J K B C D F G J K 50ppm/C 5ppm/C 501 - 1.0M B C D F G J K A B C D F G J K 25ppm/C 2ppm/C Environmental Data Method Max R Typical R MIL-STD-202 Method 107 Test condition F 0.1% 0.02% High Temperature Exposure MIL-STD-883 Method 1008 150C, 1000 hours 0.1% 0.05% Low Temperature Shortage -55C, 1000 hours 0.03% 0.01% Life MIL-STD-202 Method 108 70C, 1000 hours 0.5% 0.01% Life at Elevated Temperature MIL-STD-202 Method 108 125C, 1000 hours 0.5% 0.05% Test Thermal Shock (c) IRC Advanced Film Division * 4222 South Staples Street * Corpus Christi Texas 78411 USA Telephone: 361 992 7900 * Facsimile: 361 992 3377 * Website: www.irctt.com DSOT Series Issue January 2009 Sheet 2 of 3 Wire Bondable Voltage Divider Network Physical Data DSOT143 4 0.029 0.001 (0.737mm 0.025) 0.035 0.001 (0.889mm 0.025) 3 R1 R2 2 1 0.004 min Bond Pads 0.035 0.001 (0.889mm 0.025) DSOT23 0.025 0.001 (0.635mm 0.025) 3 R1 1 R2 2 0.004 min Bond Pads Ordering Data Prefix WBD - DSOT23 - 01 - 1002 - 1002 - F B Style DSOT23 = 3-pad divider network DSOT143 = 4-pad divider network Absolute TCR Code 00 = 250ppm/C; 01 = 100ppm/C; 02 = 50ppm/C; 03 = 25ppm/C R1 Resistance Code 4-Digit resistance code ex: 1002 = 10K; 50R1 = 50.1 R2 Resistance Code 4-Digit resistance code ex: 1002 = 10K; 50R1 = 50.1 Absolute Tolerance Code K = 10%; J = 5%; G = 2%; F = 1%; D = 0.5%; C = 0.25%; B = 0.1% Ratio Tolerance Code G = 2%; F = 1%; D = 0.5%; C = 0.25%; B = 0.1%; A = 0.05% Packaging Standard packaging is 2 x 2 chip tray. For additional information or to discuss your specific requirements, please contact our Applications Team using the contact details below. (c) IRC Advanced Film Division * 4222 South Staples Street * Corpus Christi Texas 78411 USA Telephone: 361 992 7900 * Facsimile: 361 992 3377 * Website: www.irctt.com DSOT Series Issue January 2009 Sheet 3 of 3