fe cama VGA PC C | uss | Lxi Output RS:232 GPIB | sstware GSP-930, the all new 3GHz spectrum analyzer announced by GW Instek is designed by the edge of technology which provides professional characteristics to cover wide range of applications. The GSP-930 is a highly accurate spectrum analyzer and it offers various measurement functions, for example, Topographic and Spectrogram display mode, SEM, CNR, CTB, CSO, ACPR, OCBW, and so on. As well as the 10% adjustable RBW steps, built-in preamplifier, 1Hz resolution marker counter and IF output are all equipped in GSP-930 to provide outstanding measurement capability for R&D, production line, field service, signal monitoring, applications. Power Meter Topographic Display shows the spectral color varies with signal occurrence times, which shows how the signal behaves from the aspect of frequency. A 6GHz power meter is ready for average power measurement with the USB cabled power sensor (optional). igut (+ Mixer Fe IF Filter | o | ony | i | GSP-930 User's Application Spectrogram IF output Display shows spectral density of a signal varies with time. The instant frequency-change is traced in the display. Allow users to develop their own applications. In these cases, spectrum analyzer works as a broad band down converter. Relative mask wa ir Absolute mask: [cm foi Channel integrated Bk i Offset! > Offset2 Ht Offset 3 Sequence Spectrum Emission Mask The Spectrum Emission Mask is designed for picking up peaks of power in the neighboring channel. It is required to test in the modern communication systems. Allow to perform the series of front panel operations by editing the operations as a sequence and execute it.. GSP-930 FEATURES Frequency Range: 9kHz ~ 3GHz High Frequency Stability : 25ppb(0.025ppm) e RBW: 10Hz ~ 10kHz in 1-3 Steps, 10kHz ~ 1MHz in 10% Adjustable Steps e Phase Noise : -88dBc/Hz@1GHz, 10kHz Offset Built-in Measurement Functions : Channel Power, N-dB Bandwidth, OCBW, ACPR, SEM, TOI, CNR, CTB, CSO Gate Sweep Function * 1Hz Resolution Marker Counter AM/FM Demodulation and Analysis Built-in Spectrogram and Topographic Display Modes 886MHz IF Output for Users Extended Applications e Various Interface : USB Host/Device, RS-232C, LXI, Micro SD, GPIB(Optional) DVI-I Output for External Digital Display Built-in Preamplifier, 50dB Attenuator, and Sequence Function e Optional 6GHz RF Power Sensor, Tracking Generator, Battery Pack DVI Output The digital visual interface sends the picture to LCD monitor or projector without distortion to gain the quality visual effect. APPLICATIONS Wireless Communication Equipments R&D Lab and Manufacturers e Broadcast Station, TV Station, Satellite Station, STB and LNB Manufacturers e Radar System, Sonar System and Supersonic Wave System e Telecom Operators and Maintenance Service Center Education Fields GW INSTEK Simply ReliableSPECIFICATIONS FREQUENCY Frequency Range 9 kHz ~ 3.0 GHz Frequency Reference Resolution 1 Hz Accuracy +(period since last adjustment x aging rate) + stability over temperature + supply voltage stability Aging Rage +2 ppm max. 1 year after last adjustment Frequency Stability +0.025 ppm, 0 ~ 50C Over Temperature Marker Frequency Counter | Resolution 1 Hz, 10 Hz, 100 Hz, 1 kHz Frequency Span Range 0 Hz (zero span), 100 Hz ~ 3 GHz Phase Noise Offset From Carrier 10kHz = Fe =1 GHz; RBW =1 kHz, VBW = 10 Hz; Average 2 40 <-88 dBc/Hz, Typical Resolution Bandwidth Filter Bandwidth 10Hz ~ 3kHz in 1-3-10 sequence (RBW) Filter 10kHz ~ 1 MHz,increment in 10% step 200Hz, 9kHz, 120kHz, for EMI Filter Video Bandwidth (VBW) Filter Bandwidth 1 Hz ~ 1 MHz in 1-3-10 sequence Filter AMPLITUDE Amplitude Range Measurement Range 100 kHz~1 MHz, DANL~18 dBm; 1 MHz~10 MHz, DANL~21 dBm; 10 MHz~3 GHz, DANL~30 dBm Attenuator Input Attenuator Range 0 ~ 50 dB, in 1 dB step, Auto or manual setup RF Preamplifier Frequency Range 1 MHz ~ 3 GHz Gain 18 dB, Nominal (installed as standard) Maximum Safe Input Average Total Power 2 +33 dBm, Input attenuator 210 dB Level ; DC Voltage +50V Displayed Average Noise Reference 0 dB Attenuation; RBW 10 Hz; VBW 10 Hz; Span 500 Hz; Reference level = -60dBm; Trace average2=40 Level (DANL) Preamp off 9 kHz ~ 100 kHz, < -93 dBm, Nominal 100 kHz ~ 1 MHz, < -90 dBm - 3 x (f/100 kHz) dB, Nominal 1 MHz ~ 3 GHz, <-122 dBm, Nominal Preamp on 100 kHz ~ 1 MHz, < -108 dBm - 3 x (f/100 kHz) dB, Nominal 1 MHz ~ 10 MHz, < -142 dBm, Nominal 10 MHz ~ 3 GHz, <-145 dBm + 3 x (f/1 GHz) dB, Nominal Level Display Range Scales & Units Scale: Log, Linear; Units: dBm, dBmvV, dBuv, V, W Level Display Modes Trace, Topographic, Spectrogram Number of Traces 4 Detector Positive-peak, negative-peak, sample, normal, RMS (not video) . Trace Functions Clear & Write, Max/Min Hold, View, Blank, Average Spurious Response Second Harmonic Intercept Preamp off, signal input -30dBm; 0 dB attenuation; +35 dBm Typical; 10 MHz < fc < 775 MHz; +60 dBm Typical; 775 MHz $ fe < 1.5 GHz Input Related Spurious Preamp off; signal input -30dBm; 0 dB attenuation > 1 dBm, 300 MHz ~ 3 GHz; < -60 dBc, Signal level -30 dBm at 1st mixer; 20 ~ 30C Residual Response(Inherent) <-90 dBm, Input terminated; 0 dB attenuation; preamp off SWEEP Sweep Time Span > 0 Hz 22 ms ~ 1000s Span = 0 Hz 50s ~ 1000 s; Min Resolution = 10ps Sweep Mode Continuous; Single Trigger Source Free run; Video; External INPUT/OUTPUT| Front Panel RF Input N-type female, 50 ohm, nominal, VSWR <1.6 :1 Power for Option SMB male, DC + 7V/500 mA max USB Host A plug, Version 2.0, Supports Full/High/Low speed Micro SD Socket SD 1.1, Supported Micro SD, Micro SDHC, Up to 32GB capacity Rear Panel Reference Input/Output BNC female, 10 MHz Alarm Output BNC female; Open-collector Trigger Input/ BNC female, 3.3V CMOS Gated Sweep Input LAN TCP/IP Interface RJ-45 , 10Base-T ; 100Base-Tx ; Auto-MDIX USB Device B plug , for remote control only ; supports USB TMC ; Version 2.0 , Supports Full/High speed IF Output SMA female, 886 MHz output, Nominal Earphone Output 3.5mm stereo jack, wired for mono operation Video Output DVI-I, Single Link, Compatible with VGA/HDMI standard through adapter RS-232C Interface D-sub 9-pin female, Support Tx , Rx, RTS , CTS GPIB Interface (Optional) IEEE-488 bus connector AC Power Input AC 100 V ~ 240 V, 50/60 Hz, auto range selection Battery Pack (Optional) Li-lon rechargeable, with UN38.3 certification GENERAL General Internal Data storage 16 MB nominal Power Consumption <65 W Dimensions & Weight 210 x 350 x 100 (mm) /8.3 x 13.8 x 3.9 (in), Approximately 4kg (Basic unit) Specifications subject to change without notice. SP-930GD2DH ORDERING INFORMATION OPTIONAL ACCESSORIES GSP-930 = 3GHz Spectrum Analyzer PAWR-06 RF Power Sensor GSC-009 Soft Carrying Case ACCESSORI ES? GRA-415 Rack Adapter Panel Quick Start Manual x 1, User Manual CD x 1, Power Cord x 1 rer FREE DOWNLOAD Opt. 01 Tracking Generator PC Software Remote Monitor Software Opt. 02 Battery Pack IVI Driver Supports LabVIEW and LabWindows/CVI Programming Opt. 03 GPIB Interface Global Headquarters GOOD WILL INSTRUMENT CO., LTD. No.7-1, Jhongsing Road, Tucheng Dist., New Taipei City 236, Taiwan T +886-2-2268-0389 F +886-2-2268-0639 E-mail: marketing @ goodwill.com.tw China Subsidiary GOOD WILL INSTRUMENT (SUZHOU) CO., LTD. NO. 69, Lushan Road, SND, Suzhou Jiangsu 215011 China T +86-512-6661-7177 F +86-512-6661-7277 E-mail: marketing@instek.com.cn U.S.A. Subsidiary INSTEK AMERICA CORP. 3661 Walnut Avenue Chino, CA 91710, U.S.A. T +1-909-5918358 F +1-909-5912280 E-mail: sales@instekamerica.com Japan Subsidiary INSTEK JAPAN CORPORATION 4F, Prosper Bldg, 1-3-3 lwamoto-Cho Chiyoda-Ku, Tokyo 101-0032 Japan T +81-3-5823-5656 F +81-3-5823-5655 E-mail: info@instek.co.jp GU INSTEK Simply Reliable Malaysia Subsidiary GOOD WILL INSTRUMENT (M) SDN. BHD. 27, Persiaran Mahsuri 1/1, Sunway Tunas, 11900 Bayan Lepas, Penang, Malaysia T +604-6309988 F +604-6309989 E-mail: sales@ goodwill.com.my Korea Subsidiary GOOD WILL INSTRUMENT KOREA CO., LTD. Room No.805, Ace Hightech-City B/D 1Dong, Mullae-Dong 3Ga 55-20, Yeongduengpo-Gu, Seoul, Korea T +82-2-3439-2205 F +82-2-3439-2207 E-mail : gwinstek@gwinstek.co.kr www.gwinstek.com