Signal conditioning modules TxxxxP Series Active high precision signal conditioning module FEATURES Four-port isolation (signal input, signal output, power input and power output terminals are all isolated from each other) High accuracy of 0.1% Full Scale Isolation test voltage 2.5kVDC (60s) Low temperature coefficient 50PPM/ Industrial grade operating temperature from -40 to +85 Low ripple & noise 30mVp-p ESD protection to IEC/EN61000-4-2, Contact 4kV with performance Criteria B RoHS TxxxxP series signal conditioning modules (also called isolated transmitter), are analog signal conversion modules with incoming current/voltage signal input which is transformed into isolated current/voltage signal output. With an embedded high-efficient micro-power supply, the product self-supplies power to the internal signal processing circuit and inputs isolated power to the preceding-stage transducer at the same time. The electromagnetism isolation technology of the product ensures that input/output/power supply/power distribution path are all isolated from each other, meaning these products can completely replace traditional linear optocoupler isolators, providing much higher accuracy and extremely low temperature drift in comparison to optocouplers. The TxxxxP series are widely used in PLC, DCS, MCU and other isolated signal conversion applications. Selection Guide Certification -- CE -- Part No. Power Supply input Typ. (VDC) Input Signal Output Signal Isolation Power Output (VDC) T1130P 24V 4-20mA 4-20mA None T1133P 24V 4-20mA 4-20mA 24V T1430P 24V 4-20mA 1-5V None T1433P 24V 4-20mA 1-5V 24V T1450P 12V 4-20mA 1-5V None T1530P 24V 4-20mA 0-10V None T1533P 24V 4-20mA 0-10V 24V T1630P 24V 4-20mA 0-5V None T1633P 24V 4-20mA 0-5V 24V T1650P 12V 4-20mA 0-5V None T1S33P-2.5 24V 4-20mA 0-2.5V 24V T1S55P-2.5 12V 4-20mA 0-2.5V 12V T2230P 24V 0-20mA 0-20mA None T2233P 24V 0-20mA 0-20mA 24V T2633P 24V 0-20mA 0-5V 24V T2650P 12V 0-20mA 0-5V None T4130P 24V 1-5V 4-20mA None T4630P 24V 1-5V 0-5V None T5130P 24V 0-10V 4-20mA None T5133P 24V 0-10V 4-20mA 24V T5150P 12V 0-10V 4-20mA None T5153P 12V 0-10V 4-20mA 24V T5230P 24V 0-10V 0-20mA None T5530P 24V 0-10V 0-10V None T5533P 24V 0-10V 0-10V 24V T5535P 24V 0-10V 0-10V 12V T5544P 15V 0-10V 0-10V 15V T5550P 12V 0-10V 0-10V None T5555P 12V 0-10V 0-10V 12V T5630P 24V 0-10V 0-5V None 2018.11.22-B/3 Page 1 of 4 MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation Signal conditioning modules TxxxxP Series T5650P 12V 0-10V 0-5V None T5660P 5V 0-10V 0-5V None T6130P 24V 0-5V 4-20mA None T6150P 12V 0-5V 4-20mA None T6230P 24V 0-5V 0-20mA None T6233P 24V 0-5V 0-20mA 24V T6235P 24V 0-5V 0-20mA 12V T6250P 12V 0-5V 0-20mA None T6530P 24V 0-5V 0-10V None T6560P 5V 0-5V 0-10V None T6630P 24V 0-5V 0-5V None T6640P 15V 0-5V 0-5V None T6650P 12V 0-5V 0-5V None T6S36P-2.5 24V 0-5V 0-2.5V 5V T6S60P-3 5V 0-5V 0-3V None Notes: Customization of products is available on request. Input Specifications Item Operating Conditions Input voltage Power Input Input power Isolation signal power at full load Min. Typ. Max. Unit Typ.-5% Typ. Typ.+5% VDC -- -- 2.0 W Power supply protection Input reverse polarity protection Input signal Signal Input See selection guide Input impedance Over range In case of max. input of current signal -- -- 250 mV In case of max. input of voltage signal 10 -- -- M In case of current signal input -- -- 50 mA In case of voltage signal input -- -- 30 V Min. Typ. Max. Unit Typ.-10% Typ. Typ.+10% VDC -- -- 25 mA Output Specifications Item Operating Conditions Output voltage Isolation Power Output Isolated power output at full load Output current Short circuit protection Ta=25 Continuous short-circuit protection (except 24V input part) Output signal Signal Output See selection guide Load capacity Ripple & Noise In case of max. input of voltage signal 2 -- -- K In case of max. input of current signal -- -- 500 20MHz Bandwidth -- 30 -- mVp-p Min. Typ. Max. Unit Transmission Specifications Item Operating Conditions Signal Precision Ta=25 -0.1% FS -- +0.1% FS -- Power Regulation Power supply input Typ. 5% -0.05% FS -- +0.05% FS -- Load Regulation Change from no-load to full load -0.05% FS -- +0.05% FS -- Temperature Coefficient Operating temperature from -40 to +85 -- -- 50 PPM/ Band Width 2 -- -- KHz Response Time -- -- 1 ms 2018.11.22-B/3 Page 2 of 4 MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation Signal conditioning modules TxxxxP Series General Specifications Item Operating Conditions Min. Typ. Max. Unit Four-port isolation (signal input, signal output, power input and isolation power output are all isolated from each other) Electric Isolation Isolation Voltage Electric Strength Test for 1 minute with a leakage current <1mA, humidity <70% 2.5 -- Isolation Resistance 500VDC -- kVDC 100 -- -- M Operating Temperature -40 -- +85 Transportation and Storage Temperature -40 -- +85 -- -- 30 Ta=25 Case Temperature Rise The presence of dust and corrosive gas may cause damage to the product Application Environment Mechanical Specifications Case Material Black plastic, flame-retardant and heat-resistant Package DIP24 Weight 11.5g( Typ.) Cooling Method Free air convection Electromagnetic Compatibility (EMC) ESD Immunity EFT Surge IEC/EN61000-4-2 Contact 4kV perf. Criteria B IEC/EN61000-4-4 Power supply port 2kV (see Fig. 2 for recommended circuit) perf. Criteria B IEC/EN61000-4-4 Other ports 1kV (see Fig. 2 for recommended circuit) perf. Criteria B IEC/EN61000-4-5 Power supply port 1kV (see Fig. 2 for recommended circuit) perf. Criteria B IEC/EN61000-4-5 Other ports 1kV (line to ground) (see Fig. 2 for recommended circuit) perf. Criteria B Application Precautions 1. Carefully read and follow the instructions before use; contact our technical support if you have any question; 2. Do not use the product in hazardous areas; 3. Use only DC power supply source for this product. 220V AC power supply is prohibited; 4. It is strictly forbidden to disassemble the product privately in order to avoid product failure or malfunction. After-sales service 1. Factory inspection and quality control are strictly enforced before shipping any product; please contact your local representative or our technical support if you experience any abnormal operation or possible failure of the module; 2. The products have a 3-year warranty period, from the date of shipment. The product will be repaired or exchanged free of charge within the warranty period for any quality problem that occurs under normal use. Applied circuit Please refer to Isolated Transmitter application notes. Design Reference 1. Wiring diagram for product application + Isolation Power Output + PoutSin- Pgnd Pout+ 11 2/3 - 14 13 Sin+ PinSout1 Output Signal 15 23 Pin+ 24 Sout+ Power Input 12 - - + + Signal Input Fig. 1 Notes : For modules with no isolation power output, Pin no. 13, 14 and 15 are not connected (NC). For the isolated bi-polar power modules, Pin 13 (Pout-) is isolated negative power output, Pin 14 (Pout+) is isolated positive power output and Pin 15 is reference ground. For isolation single power modules, Pin 13 (Pout-) is the isolated negative power output, Pin 14 (Pout+) is the isolation positive power output and Pin 15 is NC. 2018.11.22-B/3 Page 3 of 4 MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation Signal conditioning modules TxxxxP Series 2. EMC compliance recommended circuit Component Recommended part TVS1 SMCJ30A TVS2 SMBJ15A TVS3 SMBJ15A TVS4 SMBJ15A TVS5 SMBJ28A TVS6 SMBJ15A Fig. 2 Notes : Part T2633P must have resistance R connected at Pin+, all other parts do not need the R. For the isolated bi-polar power modules, Pin 13 (Pout-) is isolated negative power output, Pin 14 (Pout+) is isolated positive power output and Pin 15 is reference ground. For isolation single power modules, Pin 13 (Pout-) is the isolated negative power output, Pin 14 (Pout+) is the isolation positive power output and Pin 15 is NC, therefore NO need for TVS4 and TVS6. R 2/1W C 220uF/35V 3. For more information please find the application notes on www.mornsun-power.com Dimensions and Recommended Layout Notes: 1. For additional information on Product Packaging please refer to www.mornsun-power.com. The Packaging bag number: 58240012; 2. Unless otherwise specified, parameters in this datasheet were measured under the conditions of Ta=25, humidity<75%RH with nominal input voltage and rated output load; 3. All index testing methods in this datasheet are based on company corporate standards; 4. The above are the performance indicators of the product models listed in this datasheet. Some indicators of non-standard models will exceed the above requirements. For details, please contact our technical staff; 5. We can provide product customization service; 6. Products are related to laws and regulations: see "Features" and "EMC"; 7. Our products shall be classified according to ISO14001 and related environmental laws and regulations, and shall be handled by qualified units. Mornsun Guangzhou Science & Technology Co., Ltd. Address: No. 5, Kehui St. 1, Kehui Development Center, Science Ave., Guangzhou Science City, Luogang District, Guangzhou, P. R. China Tel: 86-20-38601850 Fax: 86-20-38601272 E-mail: sales@mornsun.cn 2018.11.22-B/3 Page 4 of 4 MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation