101.2mm (4.0INCH) SINGLE DIGIT NUMERIC DISPLAY Part Number: SA40-19SURKWA Hyper Red Features Description z Large size. The Hyper Red source color devices are made with Al- z 4.0 inch digit height. GaInP on GaAs substrate Light Emitting Diode. z Low current operation. z Excellent character appearance. z High light output. z Easy mounting on P.C. boards or sockets. z Mechanically rugged. z Standard : gray face, white segment. z RoHS compliant. Package Dimensions& Internal Circuit Diagram Notes: 1. All dimensions are in millimeters (inches), Tolerance is 0.25(0.01")unless otherwise noted. 2. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. SPEC NO: DSAM8422 REV NO: V.1A DATE: JAN/23/2013 PAGE: 1 OF 7 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: C.H.HAN ERP: 1301003062 Selection Guide Part No. Dice SA40-19SURKWA Iv (ucd) [1] @ 10mA Lens Type Hyper Red (AlGaInP) Min. Typ. 88000 250000 *31000 *74000 White Diffused Description Common Anode, Rt. Hand Decimal. Note: 1. Luminous intensity/ luminous Flux: +/-15%. * Luminous intensity value is traceable to the CIE127-2007 compliant national standards. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device Typ. peak Peak Wavelength Hyper Red D [1] Dominant Wavelength 1/2 Max. Units Test Conditions 645 nm IF=20mA Hyper Red 630 nm IF=20mA Spectral Line Half-width Hyper Red 28 nm IF=20mA C Capacitance Hyper Red 35 pF VF=0V;f=1MHz VF [2] Forward Voltage Per Segment Or (DP) Hyper Red 7.8 (3.9) 10.0 (5.0) V IF=20mA IR Reverse Current Per Segment Or (DP) Hyper Red 20 (10) uA VR=5V (VR=5V) Notes: 1.Wavelength: +/-1nm. 2.Forward Voltage: +/-0.1V. 3. Wavelength value is traceable to the CIE127-2007 compliant national standards. Absolute Maximum Ratings at TA=25C Parameter Hyper Red Units Power dissipation Per Segment Or (DP) 600 (150) mW DC Forward Current Per Segment Or (DP) 60 (30) mA Peak Forward Current [1] Per Segment Or (DP) 370 (185) mA 5 (5) V Reverse Voltage Per Segment Or (DP) Operating / Storage Temperature Lead Solder Temperature[2] -40C To +85C 260C For 3-5 Seconds Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. SPEC NO: DSAM8422 REV NO: V.1A DATE: JAN/23/2013 PAGE: 2 OF 7 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: C.H.HAN ERP: 1301003062 Hyper Red SA40-19SURKWA SPEC NO: DSAM8422 REV NO: V.1A DATE: JAN/23/2013 PAGE: 3 OF 7 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: C.H.HAN ERP: 1301003062 SPEC NO: DSAM8422 REV NO: V.1A DATE: JAN/23/2013 PAGE: 4 OF 7 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: C.H.HAN ERP: 1301003062 PACKING & LABEL SPECIFICATIONS SA40-19SURKWA SPEC NO: DSAM8422 REV NO: V.1A DATE: JAN/23/2013 PAGE: 5 OF 7 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: C.H.HAN ERP: 1301003062 SPEC NO: DSAM8422 REV NO: V.1A DATE: JAN/23/2013 PAGE: 6 OF 7 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: C.H.HAN ERP: 1301003062 All design applications should refer to Kingbright application notes available at http://www.KingbrightUSA.com/ApplicationNotes SPEC NO: DSAM8422 REV NO: V.1A DATE: JAN/23/2013 PAGE: 7 OF 7 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: C.H.HAN ERP: 1301003062 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Kingbright: SA40-19SURKWA