MC68336/376 OVERVIEW MOTOROLA
USER’S MANUAL Rev. 15 Oct 2000 3-11
Table 3-5 MC68336/376 Signal Functions
Mnemonic Signal Name Function
ADDR[23:0] Address Bus 24-bit address bus used by the CPU32
AN[59:48]/[3:0] QADC Analog Input 16 channel A/D converter analog input pins
AN[w, x, y, z] QADC Analog Input Four input channels utilized when operating in multiplexed mode
AS Address Strobe Indicates that a valid address is on the address bus
AVEC Autovector Requests an automatic vector during interrupt acknowledge
BERR Bus Error Indicates that a bus error has occurred
BG Bus Grant Indicates that the MCU has relinquished the bus
BGACK Bus Grant Acknowledge Indicates that an external device has assumed bus mastership
BKPT Breakpoint Signals a hardware breakpoint to the CPU
BR Bus Request Indicates that an external device requires bus mastership
CLKOUT System Clock Out System clock output
CANRX0 TouCAN Receive Data CAN serial data input
CANTX0 TouCAN Transmit Data CAN serial data output
CS[10:0] Chip-Selects Select external devices at programmed addresses
CSBOOT Boot Chip-Select Chip-select for external bootstrap memory
CPWM[8:5] CTM4 PWMs Four pulse-width modulation channels
CTD[10:9]/[4:3] CTM4 Double Action
Channels
Bidirectional double action timer channels
CTM2C CTM4 Modulus Clock Modulus counter clock input
DATA[15:0] Data Bus 16-bit data bus used by the CPU32
DS Data Strobe
Indicates that an external device should place valid data on the
data bus during a read cycle and that valid data has been placed
on the data bus by the CPU during a write cycle.
DSACK[1:0] Data and Size
Acknowledge
Provides asynchronous data transfers and dynamic bus sizing
DSI, DSO, DSCLK Developmental Serial In,
Out, Clock
Serial I/O and clock for background debug mode
ECLK E-Clock M6800 bus clock output
ETRIG[2:1] QADC External Trigger External trigger pins used when a QADC scan queue is in external
trigger mode
EXTAL, XTAL Crystal Oscillator Connections for clock synthesizer circuit reference; a crystal or an
external oscillator can be used
FC[2:0] Function Codes Identify processor state and current address space
FREEZE Freeze Indicates that the CPU has acknowledged a breakpoint
HALT Halt Suspend external bus activity
IFETCH Instruction Pipeline Indicates instruction pipeline activity
IPIPE Instruction Pipeline Indicates instruction pipeline activity
IRQ[7:1] Interrupt Request Requests an interrupt of specified priority level from the CPU
MA[2:0] QADC Multiplexed
Address
When external multiplexing is used, these pins provide addresses
to the external multiplexer
MISO Master In, Slave Out Serial input to QSPI in the master mode; serial output from QSPI in
the slave mode
MODCLK Clock Mode Select Selects the source of the system clock