BOARD TO BOARD CONNECTORS TA SHEET A D Y R A IN PRELIM MEZZOSTAKTM 0.5MM HERMAPHRODITIC CONNECTORS Robust, miniature mezzanine design reduces total costs Unique dual-point contacts DESCRIPTION Robust, high density, 0.5mm pitch mezzanine connector suitable for a wide range of high reliability applications and demanding environments. Innovative hermaphroditic design provides a precise mating interface. Reduced product mix simplifies customer connector qualification, documentation and maintenance. Precisely oriented surface-mount solder leads and hold-downs enable highest quality assembly to printed circuit boards Two versions offer a choice between supplemental PCB hold-downs or short overall length. MezzoStakTM connectors are supported by MezzSelectTM services and web-based design tools. FEATURES & BENEFITS Hermaphroditic design "mates to itself" * Consolidates connector selection and documentation * Polarization prevents mis-mating Pressure-managed, dual-point contact mating interface provides easier use, fault tolerance and added reliability. Long 1mm minimum wipe assures reliable contact and accommodates system mechanical tolerances. Tactile feedback signals effective mating Extreme operating temperature range assures reliable performance between -40 and 125 degrees C. Precise 0.08mm maximum SMT lead co-planarity eases attachment of connector leads to PCBs Optional hold-downs increase strength of PCB solder attachment Footprint compatible with major competitors 0.5mm high density contact pitch in two rows * 7 Stack heights: 4mm to 7mm (0.5mm increments) * 7 Sizes: 10 to 70 positions (10 position increments) TARGET MARKETS / APPLICATIONS Portable and mobile electronic equipment Medical and Instrumentation Point-of-Sale/Retail equipment Hand-held terminals Automatic Identification and Data Capture Sensors Motor-vehicle Military Communications and Networking Data and mass-storage MEZZOSTAKTM 0.5MM HERMAPHRODITIC CONNECTORS TECHNICAL INFORMATION TA SHEET A D Y R A IN PRELIM ENVIRONMENTAL PERFORMANCE MATERIALS Housing: LCP, 94V-0, Color: Natural Contacts: Copper Alloy Plating: Performance-based with noble metal All Materials lead-free RoHS compatible per GS-22-008 ELECTRICAL PERFORMANCE Current rating per contact: 0.35 amps (de-rated) DWV: 500 volts Voltage Rating: 50 volts Contact resistance: 30 milliohm maximum Signal Integrity (Differential pairs; 7mm stack height; Connectors with SMT pads and anti-pads/voids underneath) * 10+ Gbs capable * Impedance: 100 Ohms +/- 10% @ 50 ps edge * Insertion Loss: < 1 dB to 5+ GHz * NEXT and FEXT: </= 1.0% @ 50 ps edge (10-90%) Operating Temperature: -40 to +125 deg.C Processing Temperature: 260 deg.C peak for 30 seconds MECHANICAL PERFORMANCE Durability: 30 mating cycles in environment Mating Force: 42g max per contact pair Un-mating force: 25g min per contact pair Wipe length: 1.0 mm minimum SMT lead co-planarity: 0.08mm maximum SPECIFICATIONS Product Specification: GS-12-577; Packaging Specification: GS-14-1320 Drawing Numbers: 10090503 (Standard); 10090504 (Short Length) UL and CSA pending PACKAGING Tape and reel, pickup cap pre-installed 10090504 Short PCB footprint dimensions available on customer drawing at: www.fci.com/mezzostak MezzoStakTM is a trademark under registration of FCI FCI - Americas : 1 (800) 237 2374 - Europe : 33 1 39 49 21 83 - Asia/Pacific : 65 6549 6666 www.fci.com/mezzselect ELXMEZZSTAK0609ELT Add practical connector heights of two mated connectors to determine final PCB stack height Printed on recyclable paper 10090503 Standard, with alignment pegs and metal hold-downs