Bussmann (R) Square Body - DIN 43 620 690V/700V (IEC/U.L.) 40-1000A Electrical Characteristics Ordering Information I2t (A2S) Curves Carton Weight (kg) 170M3808 170M3809 170M3810 170M3811 170M3812 170M3813 170M3814 170M3815 170M3816 170M3817 170M3818 170M3819 5 1.85 65 70 75 80 90 95 170M5808 170M5809 170M5810 170M5811 170M5812 170M5813 5 3.00 17056318 95 100 105 110 115 120 125 170M6808 170M6809 170M6810 170M6811 170M6812 170M6813 170M6814 1 1.15 17056320 Pre-arc Clearing at 660V 1* 40 50 63 80 100 125 160 200 250 315 350 400 40 77 115 185 360 550 1100 2200 4200 7000 10000 15000 270 515 770 1250 2450 3700 7500 15000 28500 46500 68500 105000 9 11 14 18 21 26 30 35 40 50 55 60 2 400 450 500 550 630 700 11000 15500 21500 28000 41000 60500 74000 105000 145000 190000 275000 405000 3 500 550 630 700 800 900 1000 14000 19500 31000 44500 69500 100000 140000 95000 135000 210000 300000 465000 670000 945000 Watts Loss n Interrupting rating 200kA (Estimated 300kA) RMS Symmetrical. n Watts loss provided at rated current. n Microswitch indicator ordered separately. See accessories on pages 58-59. DIN Type T Indicator for Micro Carton Qty. Rated Current RMS-Amps Size (R) BIF # 17056314 1 kg = 2.2 lbs. 1 lb = 0.45 kg Rated Current The rated current of this fuse range has been given with copper conductors that have a current density of 1.3 A/mm2 (IEC 60269-4). For conductor cross section according to IEC 60269-1, the fuses must be derated. Please contact Bussmann for application assistance. 7-11-01 SB01191 Form No. Page 1 of 2 BIF Doc #720017 Bussmann (R) Square Body - DIN 43 620 690V/700V (IEC/U.L.) 40-1000A (R) Electrical Characteristics Total Clearing I2t The total clearing I2t at rated voltage and at power factor of 15% are given in the electrical characteristics. For other voltages, the clearing I2t is found by multiplying by correction factor, K , given as a function of applied working voltage, E g , (RMS). 1.5 Arc Voltage This curve gives the peak arc voltage, U L , which may appear across the fuse during its operation as a function of the applied working voltage, E g , (RMS) at a power factor of 15%. 1.4 1.2 103 9 8 7 6 K 1.0 0.5 0.4 1.0 Kp 0.8 UL 0.6 0.5 0.4 0.3 5 0.3 Power Losses Watts loss at rated current is given in the electrical characteristics. The curve allows the calculation of the power losses at load currents lower than the rated current . The correction factor, K p , is given as a function of the RMS load current, Ib , in % of the rated current . 0.2 4 0.2 Eg Eg 3 100 200 300 400 500 600 690 200 300 400 500 600 690 Ib 0.1 30 40 50 60 70 80 90 100% Dimensions DIN 43 620: Type DIN 1*, DIN 2, DIN 3 Size A 1* 2 3 69 69 68 B D 135 58 150 71 150 88 E F H 45 55 76 40 48 60 20 26 33 Dimension in mm. 1mm = 0.0394 1 = 25.4mm A Indicator H D F B E 6 This bulletin is intended to clearly present comprehensive product data and provide technical information that will help the end user with design applications. Bussmann reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of any products. Bussmann also reserves the right to change or update, without notice, any technical information contained in this bulletin. Once a product has been selected, it should be tested by the user in all possible applications. 7-11-01 SB01191 Form No. Page 2 of 2 BIF Doc #720017