IT’S ABOUT CHOICE,
CHOOSE HUBBELL!
Super BaseTrak®:Largest three channel non-metallic raceway system.
Allows for maximum capacity of power, data and communication
applications. One, two and three gang boxes in both inline and full capacity
raised inline offer the widest selection and flexibility in the industry. Elbow
and tee fittings meet necessary bend radius for telecommunication
applications.
BaseTrak®:Three channel non-metallic raceway system. Suitable for
application where large power, data and communication capacity is needed.
Reducer fitting allows BaseTrak to expand to Super BaseTrak or reduce to
two channel WallTrak or two single channel PremiseTrak (latching) systems.
One and two gang inline and one two or three gang full capacity raised
inline boxes offer the widest selection in the industry. Elbows and tee fittings
meet necessary bend radius for telecommunication applications.
WallTrak®:Two channel non-metallic latching raceway system.
WallTrak is the largest two channel raceway in the industry. Wide
selection of boxes are designed for transition of two channel WallTrak to
single channel LANTrak or PremiseTrak (latching). The 1¼" bend radius
elbows and tees meet telecommunication standards.
LANTrak®:Single channel non-metallic latching raceway system. Ideal
for power, data or communication applications where large capacity is
needed and space is limited. Latching raceway allows for ease of
installation. Utilizes same boxes as WallTrak and PremiseTrak (latching)
eliminating duplicate inventory and potential mismatched boxes. The
1¼" bend radius elbows and tees meet telecommunication standards.
PremiseTrak®(Latching): Single channel non-metallic latching
raceway system. Latching raceway allows for ease of installation.
Raceway available in non-adhesive and adhesive back in five or seven
foot lengths. PremiseTrak (latching) utilizes the same boxes as LANTrak
and WallTrak eliminating duplicate inventory. Elbows and tees meet 1¼"
bend radius industry standards. Ideal for category 5, 5e, 6 or fiber optic
installations.
PremiseTrak 1®(Non-Latching): Single channel non-metallic two-
piece raceway system. PremiseTrak 1 is an excellent cost effective
solution for single channel power, data or communication applications.
Two-piece raceway design is available in non-adhesive or adhesive
versions in five and seven foot lengths. PremiseTrak 1 (non-latching)
utilizes a wide variety of boxes and fittings designed exclusively for
PremiseTrak 1.
PlugTrak®:Prewired non-metallic power accessway. Easy to install.
Available in 15 or 20 amp in either five or six foot lengths. Single or two
circuit systems with a variety of receptacle spacing alternatives.
PlugTrak utilizes LANTrak fittings and mates with boxes used with
LANTrak, WallTrak or PremiseTrak (latching) systems.
Portable PlugTrak®:Prewired portable power accessway. Available
in 15 amp in either three foot or five foot lengths. Portable PlugTrak
comes with a quality premolded six-foot power cord and convenient
rocker switch. Portable PlugTrak can be mounted using prepunched
holes or PL1MC mounting clips.
PS3BC5
5ft. base & cover
PS3BC10
10ft. base & cover
PS3WC
Wire Clip
PB3BC5
5ft. base & cover
PB3BC10
10ft. base & cover
PB3WC
Wire Clip
PL1BC5
PL1ABC5 (w/ adhesive)
5ft. base & cover
PL1BC7
PL1ABC7 (w/ adhesive)
7ft. base & cover
PP1BC5
PP1ABC5 (w/ adhesive)
5ft. base & cover
PP1BC7
PP1ABC7 (w/ adhesive)
7ft. base & cover
PT153112P
3ft., 6ft. cord, 3 duplex receptacles
PT155112P
5ft., 6ft. cord, 5 duplex receptacles
PL1MC
Mounting clip
PT1BC5
PT1ABC5 (w/ adhesive)
5ft. base & cover
PT1BC7
PT1ABC7 (w/ adhesive)
7ft. base & cover
1Choose Raceway
2.19"
(55.62)
6.70"
(170.20)
3.41 in2
(2206.45mm2)3.41 in2
(2206.45mm2)
1.23"
(31.2)
1.63"
(41.4)
4.50"
(114.3)
1.80 in2
(1161.00mm2)1.97 in2
(1264.00mm2)
1.80 in2
(1161.00mm2)
1.04"
(26.4)
2.12"
(53.85)
.81 in2
(522.50mm2)
.79 in2
(509.60mm2)
1.04"
(26.4)
1.38"
(35.0)
1.03 in2
(664.59mm2)
.77"
(19.6)
.84"
(21.3)
1.04"
(26.4)
1.38"
(35.0)
1.04"
(26.4)
1.38"
(35.0)
.38 in2
(245.1mm2)
.68"
(17.3)
.29 in2
(188.0mm2)
1.97"
(50.00)
It is all about choices. Hubbell Wiring Device – Kellems®introduces the completely redesigned, aesthetically pleasing line of PolyTrak®
Non-Metallic surface raceway systems. From Super BaseTrak®to PremiseTrak 1®, Hubbell Wiring Device-Kellems can accommodate
the largest to smallest non-metallic raceway applications. Choice of capacity, widest selection of boxes and fittings, and a variety of
accessories and devices make Hubbell the first choice in non-metallic raceway.
Dimensions in Inches (mm) www.hubbell-wiring.com
3.76 in2
(2425.80mm2)
.75"
(18.9)
PW2BC5
PW2ABC5 (w/ adhesive)
5ft. base & cover
PW2BC7
PW2ABC7(w/ adhesive)
7ft. base & cover
See center page for
PlugTrak selection.
PS3IEBC
PS3IE*
4.36" (110.74)
6.93" (176.02)
4.36" (110.74)
PS3EEBC
PS3EE*
6.81" (172.97)
6.93" (176.02)
6.81" (172.97)
PS3FEBC
PS3FE*
9.85" (250.19)
9.85" (250.19)
2.08" (52.83)
PS3TCBC
10.00"
(254.00)
9.68" (245.87)
3.30" (83.82)
PS3SC
1.56" (39.62)
6.95" (176.53)
2.03" (51.62)
PS3SS
1.50" (38.10)
8.24" (209.30)
2.08" (52.85)
PS3EC
1.50" (38.10)
6.88" (174.75)
2.06" (52.32)
PS3CACF
6.93" (176.02)
4.32" (109.73)
6.29" (159.77)
PS3SPC
1.00" (25.40)
7.87" (199.90)
2.54" (64.52)
PS3RED1
4.81" (122.17)
6.93" (176.02)
2.05" (52.07)
PB3IEBC
PB3IE*
4.36" (110.74)
4.72" (119.89)
4.36" (110.74)
PB3EEBC
PB3EE*
6.48" (164.59)
4.72" (119.89)
6.48" (164.59)
PB3FEBC
PB3FE*
7.64" (194.66)
7.64" (194.66)
1.71" (43.43)
PB3TCBC
7.37" (187.20)
7.08" (179.83)
2.72" (69.09)
PB3SC
1.56" (39.62)
4.74" (120.40)
1.69" (42.93)
PB3SS
1.50" (38.10)
6.01" (152.65)
1.74" (44.20)
PB3EC
2.02" (51.31)
4.68" (118.97)
1.72" (43.69)
PB3CACF
4.72" (119.89)
5.22" (132.70)
6.30" (160.02)
PB3SPC
2.22" (56.39)
5.66" (143.76)
1.60" (40.64)
PB3RED2
3.50" (88.90)
4.72" (119.89)
1.73" (43.94)
PB3TRBC3
3.22" (81.79)
7.28" (184.91)
2.42" (61.47)
PW2IEBC
PW2IE*
2.83" (71.88)
2.32" (58.93)
2.83" (71.88)
PW2EEBC
PW2EE*
5.00" (127.00)
2.32" (58.93)
5.00" (127.00)
PW2FEBC
PW2FE*
3.94" (100.08)
3.94" (100.08)
1.11" (28.19)
PW2TCBC
PW2TC*
5.42" (137.67)
3.91" (99.31)
1.90" (48.26)
PW2SC
1.11" (28.19)
2.30" (58.42)
1.11" (28.19)
PW2SS
0.62" (15.75)
3.43" (87.12)
1.12" (28.45)
PW2EC
1.00" (25.40)
2.14" (54.36)
1.04" (26.42)
PW2CACF
4.18" (106.17)
3.32" (84.33)
4.20" (106.68)
PW2RED4
1.62" (41.15)
2.40" (60.96)
1.15" (29.21)
PL1IEBC
PL1IE*
2.51" (63.75)
1.57" (39.88)
2.51" (63.75)
PL1EEBC
PL1EE*
5.06" (128.52)
1.57" (39.88)
5.06" (128.52)
PL1FEBC
PL1FE*
3.19" (81.03)
3.19" (81.03)
1.11" (28.19)
PL1TCBC
PL1TC*
4.75" (120.65)
3.15" (80.01)
1.11" (28.19)
PL1SC
1.12" (28.45)
1.55" (39.37)
1.11" (28.19)
PL1SS
0.62" (15.75)
2.68" (68.07)
1.12" (28.45)
PL1EC
1.00" (25.40)
1.39" (35.31)
1.04" (26.42)
PLP1CACF
2.29" (58.17)
3.31" (84.07)
3.90" (99.06)
PP1IEBC
PP1IE*
2.40" (60.96)
1.03" (26.16)
2.40" (60.96)
PP1EEBC
PP1EE*
4.47" (113.54)
1.03" (26.16)
4.47" (113.54)
PP1FEBC
PP1FE*
2.62" (66.55)
2.62" (66.55)
0.85" (21.59)
PP1TCBC
PP1TC*
4.22" (107.19)
2.62" (66.55)
0.85" (21.59)
PP1SC
1.09" (27.69)
1.02" (25.91)
0.85" (21.59)
PP1SS
0.62" (15.75)
1.94" (49.28)
0.86" (21.84)
PP1EC
1.00" (25.40)
0.84" (21.34)
0.77" (19.56)
PLP1CACF
2.29" (58.17)
3.31" (84.07)
3.90" (99.06)
PT1IE*
1.34" (33.9)
0.89" (22.7)
1.34" (33.9)
PT1EE*
1.24" (27.69)
0.88" (22.35)
1.24" (27.69)
PT1FE*
1.33" (33.78)
1.33" (33.78)
0.74" (18.70)
PT1TC*
1.77" (44.90)
1.33" (33.80)
0.74" (18.70)
PT1SC*
1.00" (25.40)
0.89" (22.61)
0.74" (18.70)
PT1EC
0.88" (22.35)
0.74" (18.70)
0.89" (22.70)
PT12CA
1.64" (41.60)
1.62" (41.00)
2.50" (63.50)
3Choose Fittings
A
C
B
A
C
B
A
C
B
A
C
B
A
C
B
A
C
B
A
C
B
A
CB
C
B
AC
B
AC
BA
A
B
C
A
B
C
A
B
C
A
B
C
A
B
C
A
B
C
Dimensions in Inches (mm)
Internal Elbow
Base/Cover
*Cover Only
External Elbow
Base/Cover
*Cover Only
Flat Elbow
Base/Cover
*Cover Only
Tee Cover
Base/Cover
*Cover Only Splice Cover Security Cap End Cap
Conduit Adapter/
Ceiling Fitting
Surface Panel
Connector Reducer
Transition
Fitting
Catalog # Duplex Receptacle
Numbers Amps Circuits Receptacles Spacing (in)
PT155112 15 Single 5 12
PT155212 15 Two 5 12
PT155115 15 Single 4 15
PT155130 15 Single 2 30
PT205112 20 Single 5 12
PT205212 20 Two 5 12
PT205115 20 Single 4 15
PT205215 20 Two 4 15
PT205130 20 Single 2 30
Catalog # Duplex Receptacle
Numbers Amps Circuits Receptacles Spacing (in)
PT156112 15 Single 6 12
PT156212 15 Two 6 12
PT156118 15 Single 4 18
PT156124 15 Single 3 24
PT206106 20 Single 12 6
PT206206 20 Two 12 6
PT206112 20 Single 6 12
PT206212 20 Two 6 12
PT206118 20 Single 4 18
PT206218 20 Two 4 18
PT206124 20 Single 3 24
PT206224 20 Two 3 24
PT206136 20 Single 2 36
6 Foot
5 Foot
PlugTrak accepts LANTrak “PL” series fittings and “PDB” series boxes.
www.hubbell-wiring.com
1Reduces from Super BaseTrak to BaseTrak.
2Reduces from BaseTrak to WallTrak. 3Transitions horizontal to vertical BaseTrak to WallTrak, LANTrak or PremiseTrak (Latching).
4Reduces from WallTrak to 1 or 2 PremiseTrak (latching).
4Choose Plates and Outlets
KP1
Toggle
KP7
Rec. (1.41" ID)
KP8
Duplex
KP14
Blank
KP26
StyleLine
KP212
(2) Coax
KP2163
(3) Jacks
KP720
Rec. (1.60" ID)
KP2162
(2) Jacks
KP2140
Coax/Jack
Dimensions in Inches (mm) www.hubbell-wiring.com
DP29OW
Keystone
9 Port Flush
DP212OW
Keystone
12 Port Flush
Two Gang “KP” Plates for PremiseTrak 1 (Non-Latching)
KP2
(2) Toggle
KP2LAN
IBM LAN
Opening
KP82
(2) Duplex
KP2216
(4) Jacks
KP262
(2) StyleLine
KP24
Blank
FCX244OW
StyleLine
Keystone
2 Port
FCX344OW
StyleLine
Keystone
3 Port
DJOOW
Duplex
Keystone
2 Port
DJ106OW5
Duplex
Keystone
4 Port Flush
HBL5E4A
4 Port, T568A
Cat. 5e
(Jacks Included)
HBL5E4B
4 Port, T568B
Cat. 5e
(Jacks Included)
DFBM05OW
Blank Module
.5 Unit
DFBM1OW
Blank Module
1 Unit
DFBM15OW
Blank Module
1.5 Unit
DF1KOW
Keystone,
1 Port Flat,
1 Unit
DF12KOW
Keystone,
2 Port Flat,
1 Unit
DFA1KOW
Keystone,
1 Port Angled,
1.5 Unit
DFA2KOW
Keystone,
2 Port Angled,
1.5 Unit
DFA1SCOW
SC 1 Duplex
Angled,
1.5 Unit
DFA2SCOW
SC 2 Duplex
Angled,
2 Unit
HPS1DOW
StyleLine
P8DOW
Duplex
DP12OW
Keystone
2 Port Flush
DP13OW
Keystone
3 Port Flush
DP14OW
Keystone
4 Port Flush
DP16OW
Keystone
6 Port Flush
Smooth “DP” Plates for PremiseTrak1 (Non-Latching)
and PDB12TGLV
Plates and Frame Modules
Snap in Connector Fittings (Flush Outlets) and Outlet Plates
1Select Frame 2Select Modules
In three unit combinations.
Front loading plate will accept any modules in three unit combinations. Available in office white. Angled fixtures to be used in bottom opening only.
Snap-in connectors to be used with DP, DF, HPSIDOW, P8DOW and communication inserts. Not recommended for use with KP plates.
Communication Outlets (Jacks)
Plate to Box Compatibility Selection Guide
DF1OW
Single Gang
Plate Frame
DF2OW
Double Gang
Plate Frame
SIBOW
Blank
(10 pack)
SIFOW
F Connector
SISTOW
ST Fiber
Connector
SIBNCOW
BNC
SIRCAOW
RCA Black
SISVOW
Super S-Video
Black
SIFSC*
SC Duplex
Adapter
SIFSCST*
SC to ST
Duplex
Adapter
*Use with plate and
frame modules only.
HBL5EOW
Cat. 5e, Office White
T568A, T568B,
RJ45
HBL6OW
Cat. 6, Office White
T568A, T568B,
RJ45
HBLUOW
6 Position
USOC, Office White
RJ25
OW=Office White
BK= Black
OR=Orange
B=Blue
R= Red
GY=Gray
W=White
EI=Elec. Ivory
GN=Green
Y=Yellow
Jack Color Options KeyStone
Opening
B
A
Communication Outlets
PS3IND PS3FCIB 2G 3G PB3IND 2G PB3FCIB 2G 3G PDB12 TGD TGLV PT12 PT12TGB
1 Gang KP ••
1 Gang DP ••
HPS1DOW ••
P8DOW ••
DF 1 Gang ••
DF 2 Gang ••
2 Gang DP ••
2 Gang KP
Replaces OW Suffix
Single Gang Flush “KP” Plates
Single Gang Smooth “DP” Plates
5Must use standard or deep box.
Recommended hole
size for mounting all
WD-K Jacks
A: .580 in.
B: .760 in.
Wide selection of Office White devices available.
PS3IND
7.00" (177.80)
6.95" (176.53)
2.28" (57.91)
PS3FCIB
4.38" (111.25)
6.95" (176.53)
3.46" (87.88)
PS3FCIB2G
7.20" (182.88)
6.95" (176.53)
3.46" (87.88)
PS3FCIB3G
9.96" (252.98)
6.95" (176.53)
3.46" (87.88)
PB3IND
7.70" (195.58)
4.84" (122.94)
2.02" (51.30)
PB3IND2G
7.00" (177.80)
4.75" (120.65)
3.22" (81.78)
PB3FCIB
4.38" (111.25)
4.80" (121.92)
3.17" (80.52)
PB3FCIB2G
7.20" (182.88)
4.80" (121.92)
3.17" (80.52)
PB3FCIB3G
9.96" (252.98)
4.80" (121.92)
3.17" (80.52)
PDB12LP
3.25" (82.55)
4.90" (124.46)
1.25" (31.75)
PDB12S
3.25" (82.55)
4.90" (124.46)
1.78" (45.21)
PDB12D
3.25" (82.55)
4.90" (124.46)
2.44" (61.98)
PDB12TGD
5.06" (128.52)
4.90" (124.46)
2.44" (61.98)
PDB12TGLV
5.06" (128.52)
4.90" (124.46)
2.44" (61.98)
PDB12LF
5.31" (134.87)
1.29" (32.77)
PDB12LP
3.25" (82.55)
4.90" (124.46)
1.25" (31.75)
PDB12S
3.25" (82.55)
4.90" (124.46)
1.78" (45.21)
PDB12D
3.25" (82.55)
4.90" (124.46)
2.44" (61.98)
PDB12TGD
5.06" (128.52)
4.90" (124.46)
2.44" (61.98)
PDB12TGLV
5.06" (128.52)
4.90" (124.46)
2.44" (61.98)
PDB12LF
5.31" (134.87)
1.29" (32.77)
PDB12LP
3.25" (82.55)
4.90" (124.46)
1.25" (31.75)
PDB12S
3.25" (82.55)
4.90" (124.46)
1.78" (45.21)
PDB12D
3.25" (82.55)
4.90" (124.46)
2.44" (61.98)
PDB12TGD
5.06" (128.52)
4.90" (124.46)
2.44" (61.98)
PDB12TGLV
5.06" (128.52)
4.90" (124.46)
2.44" (61.98)
PDB12LF
5.31" (134.87)
1.29" (32.77)
C
B
AC
B
A
C
B
AC
B
A
C
B
A
B
A
C
B
A
C
B
A
C
B
A
C
B
A
C
B
A
C
B
A
A
B
C
A
B
C
A
B
C
A
B
C
A
B
C
PT12LPB
3.25" (82.55)
4.90" (124.46)
1.12" (28.50)
PT12SBA
3.25" (82.55)
4.90" (124.46)
1.63" (41.40)
PT12DBA
3.25" (82.55)
4.90" (124.46)
1.91" (48.40)
PT12TGB
4.90" (124.50)
5.06" (128.50)
1.91" (48.40)
PT12LFB
5.31" (134.87)
1.04" (26.50)
A
B
C
2Choose Boxes
Dimensions in Inches (mm) www.hubbell-wiring.com
One Gang
Inline
Two Gang
Inline
Three Gang
Inline
One Gang
Full Capacity
Raised Inline
Two Gang
Full Capacity
Raised Inline
Three Gang
Full Capacity
Raised Inline
One Gang
Low Profile
One Gang
Standard
One Gang
Deep
Two Gang
Deep Divided
Two Gang
Deep
Round
Lighting
Fixture
PlugTrak accepts
LANTrak “PL” series
fittings and “PDB”
series boxes.
PDB2DIV
For use with the two
gang deep divided box
(PDB12TGD) only.
PDB1DIV
For use with one gang
boxes (PDB12LP, PDB12S
and PDB12D).
A
B
CA
B
C
2.79" (70.86)
1.40" (35.56)
.94" (23.88)
A
B
C
4.62" (117.35)
2.76" (70.10)
.94" (23.88)
A
B
C
(To separate power and data/communication, use PDB1DIV or PDB2DIV. See bottom of page for detail.)
P
o
w
e
r
C
ir
cu
it
s
(
THHN
/
T90 N
y
lon
)
4
P
a
ir
(
.190 O.D.
)
2
5
P
a
i
r
(
.500 O.D.
)
pe RG59
(
.242 O.D.
)
2
o
r 4 Fi
ber
R
ou
n
d
Cab
l
e
(
.190 O.D.
)
F
iber
O
ptic
Jumper
s
(
.118 O.D.
)
Fiber
O
ptic
Zip
C
or
d
(
.12 x 26 O.D.
)
Cate
g
or
y
5, 5e or
6
(
.215 O.D.
)
(
.250 O.D.
)
14 AW
G
C
h
a
nn
el
12 AW
G
1
0
AW
G
4
0
%
100
%
100
%
40
%
40
%
100
%
100
%
40
%
40
%
100
%
100
%
4
0
%
40
%
100
%
40
%
22
2
1
3
11
1
6
11
1
7
55
8
27
4
2
8
4
3
44
3
3
2
17
21
1
6
17
22
1
6
1
6
12
8
6
8
6
55
14
6
27
72
28
74
22
58
11
29
11
62
31
31
24
12
12
39
T
ele
p
hon
e
D
a
t
a
(
Copper Cable
)
D
a
t
a
(
62.5M2 Sum Multimode Fiber
O
ptic Cable
)
C
hannels A
&
C
cross sectional areas =
S
u
p
er BaseTrak 3.41i
n
2
each
,
BaseTrak 1.80i
n
2
eac
h.
Channel B cross sectional area = Su
p
er BaseTrak 3.76 i
n
2
, BaseTrak 1.96i
n
2
.
*
Maximum power capacit
y
in sin
g
le channel
O
NLY
.
**
T
otal power wirin
g
capacit
y
must not exceed number s
p
ecified in A + B + C
.
connectors restrict the cross sectional area o
f
the racewa
y
.
A + B +
C
A
o
r
C
B
25
63
3
9
5
21
3
2
7
1
9
42
*
30
*
28
*
60**
36**
45**
42
*
30
*2
8
*
27
69
4
1
0
1
5
39
3
2
81
17
42
1
9
49
14
36
4
0
1
03
30
7
6
21
5
41
6
4
0
25
63
65
1
6
4
30
7
5
5
21
3
21
36
3
4
3
6
21
56
27
69
71
17
9
3
2
8
1
A
B
C
(
THHN/T90 N
y
lon
)
4
P
a
i
r
(
.190
O
.D.
)
25
P
a
i
r
(
.500
O
.D.
)
T
y
pe RG59
U
(
.242 O.D.
)
2
o
r 4 Fi
ber
R
ou
n
d
Cab
l
e
(
.190 O.D.
)
Fiber
O
ptic
Jumper
s
(
.118 O.D.
)
Fiber
O
ptic
Z
ip Cor
d
(
.12 x .26 O.D.
)
Cate
g
or
y
5, 5e or
6
(
.215 O.D.
)
(
.250 O.D.
)
1
4 AW
G
A + B +
C
A
o
r
C
B
12 AW
G
1
0
AW
G
40
%
100
%
100
%
4
0
%
4
0
%
100
%
100
%
4
0
%
4
0
%
100
%
100
%
4
0
%
4
0
%
100
%
40
%
Tele
p
hon
e
Da
t
a
(
Copper Cable
)
Da
t
a
(
62.5M2 Sum Multimode Fiber
O
ptic Cable
)
48
12
0
7
17
3
72
21
53
42
*
36
*
42
*
72
**
66
**
78
**
42
*
36
*
42
*
53
1
3
2
7
1
9
29
74
90
2
2
9
3
2
8
1
3
7
9
4
27
69
11
5
2
9
1
8
4
214
41
1
03
30
7
6
48
12
0
1
2
5
3
12
5
7
142
14
9
3
72
388
969
177
441
53
1
3
21
38
3
4
5
63
1
5
7
A
B
C
A
A
A=.
38
i
n
2
12
11
8
5
1
3
0
1
3
8
4
1
0
3
7
5
1
3
14
3
4
6
1
5
A=.2
9
i
n
2
5
8
5
4
1
0
0
1
2
6
3
8
2
5
4
1
0
1
0
26
4
12
A
A=1.
03
i
n
2
42
3
4
22
14
36
2
5
9
22
11
28
8
21
14
36
3
7
9
41
6
4
0
Power
C
ircuit
s
(With or without standatd devices
i
n
an
i
n
li
ne
b
ox.
)
Super BaseTrak®
(PS3)
LANTrak®
(PL1)
Printed In U.S.A. Specifications subject to change without notice. ® Registered trademark of Hubbell Incorporated. H5039
Worldwide Locations
Hubbell Canada (905) 839-1138, Fax (905) 839-9108
Hubbell Ltd. England (441) 234-855444, Fax (441) 234-854008
Hubbell-Taian Co., Ltd., (886) 2 567-5995, Fax (886) 2 567-4853
Hubbell de Mexico, S.A. de C.V. (52) 5 575-2022, Fax (52) 5 559-8626
Caribe Sales Agencies, Puerto Rico (809) 720-7185, Fax (809) 789-2796
Hubbell Incorporated (Delaware)
185 Plains Road
Milford, CT 06460-2420
(203) 882-4800 • FAX (800) 255-1031
Physical Properties
(When tested in accordance with UL 5A)
Impact Resistance . . . . . . . . .5 ft. lbs.
Crush Resistance . . . . . . . . .300 lbs.
Temperature Range . . . . . . . . -25.6° to 158° F
Flame Rating . . . . . . . . . . . . .UL94V-0
Material . . . . . . . . . . . . . . . . .UV Stabilized PVC
Codes / Standards
NEC Article . . . . . .388
EIA/TIA . . . . . . . . .569A
UL Standard . . . . .UL 5A
Listings . . . . . . . . .E118895 / E119190
CSA Standard . . . .C22.2 no. 62
Listing . . . . . . . . . .LR87514
PlugTrak Specifications
NEC Article(s) . . . . . . . .380
Receptacle Rating . . . .NEMA 5-15R & 5-20R
Wire . . . . . . . . . . . . . . .#12 AWG Standard Copper
Receptacle Face . . . . . .Thermoplastic
echnical Data
T
Wiring Device-Kellems
PremiseTrak®
(PP1)
PremiseTrak 1®
(PT1)
WallTrak®
(PW2)
BaseTrak®
(PB3)
www.hubbell-wiring.com
Visit our electronic catalog for detailed specifications or to learn more about Hubbell non-metallic
raceway at www.hubbellcatalog.com.