Inductors for Standard Circuits Wound/STD NLV/NL series Type: NLV25 NLV32 NL453232 NL565050 2520[1008 inch]* 3225[1210 inch] 4532[1812 inch] 5650[2220 inch] * Dimensions Code JIS[EIA] Issue date: September 2011 * All specifications are subject to change without notice. * Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications. (1/11) Inductors for Standard Circuits Wound/STD Conformity to RoHS Directive NLV Series NLV25 FEATURES * The product has good heat durability that withstands lead-free compatible reflow soldering conditions. * Lead-free material is used for the plating on the terminal * The electrical characteristics, reliability, shape and pad shape are the same as the previous NL series. * The product uses metal terminals, which realize excellent connection reliability. * Highly heat resistant thermoplastic resin is used to form the exterior package. * From 0.01H to 100H, all of the products in the E-12 series are J(5%) tolerance products. * This product is in compliance with the RoHS Directive. Other products with specifications that do not include exemption regulations are also available. FLOW SOLDERING 10s max. 260C max. Natural cooling 170C 150C Pre-heating 60 to 120s Time (s) IRON SOLDERING Tip temperature Heating time Soldering rod specifications 300 to 350C 3 secconds/soldering Output: 30W Tip diameter: 1mm * Based on the above conditions, use a maximum product temperature of APPLICATIONS * Audio-visual equipment including TVs, VCRs and digital cameras. * Electronic equipment used in communication infrastructures including xDSL and mobile base stations. * Electronic equipment used in onboard automobile equipment including car audio and ECU systems. * Other electronic equipment including HDDs and ODDs. 260C and a maximum accumulated heating time of 10 seconds as a guideline. * Please contact us for details. SPECIFICATIONS (2) Dimensions Operating temperature range Storage temperature range -40 to +105C [Including self-temperature rise] -40 to +105C RECOMMENDED SOLDERING CONDITIONS REFLOW SOLDERING 10s max. 255C 230C Natural cooling 180C PRODUCT IDENTIFICATION NLV 25 T- 2R2 J - PF (1) (2) (3) (4) (5) (6) (1) Series name 25 2.5x2.0x1.8mm (LxWxT) (3) Packaging style T Taping (reel) (4) Inductance value 010 R10 1R0 100 101 0.01H 0.1H 1H 10H 100H 150C (5) Inductance tolerance Pre-heating 90 to 120s 40s max. Time (s) J 5% (6) Lead-free compatible product PF EF Conformity to RoHS directive, exemption regulations apply Conformity to RoHS directive PACKAGING STYLE AND QUANTITIES Packaging style Taping Quantity 2000 pieces/reel * Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications. * All specifications are subject to change without notice. 001-03 / 20110927 / e511_nl (2/11) SHAPES AND DIMENSIONS/RECOMMENDED PC BOARD PATTERN Inductor Solder land pattern 1.80.1 0.5 1.5 20.1 2.50.2 Terminal electrode (0.4) 1.0 1.5 1.0 1.40.1 Dimensions in mm Weight:25mg ELECTRICAL CHARACTERISTICS Inductance (H) 0.01 0.012 0.015 0.018 0.022 0.027 0.033 0.039 0.047 0.056 0.068 0.082 0.1 0.12 0.15 0.18 0.22 0.27 0.33 0.39 0.47 0.56 0.68 0.82 1 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10 12 15 18 22 27 33 39 Inductance tolerance 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% Q typ. 15 15 15 15 15 15 20 20 20 20 20 20 20 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 25 25 25 25 25 25 25 25 25 25 20 Test frequency L,Q (MHz) 100 100 100 100 100 100 100 100 100 100 100 100 100 25.2 25.2 25.2 25.2 25.2 25.2 25.2 25.2 25.2 25.2 25.2 7.96 7.96 7.96 7.96 7.96 7.96 7.96 7.96 7.96 7.96 7.96 7.96 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 Self-resonant frequency (MHz)min. 2150 2050 2000 1850 1650 1550 1450 1350 1200 1100 1050 900 800 700 550 500 450 425 400 375 350 325 300 260 245 230 182 135 105 70 55 48 43 42 39 36 33 30 26 24 22 21 20 18 DC resistance ( )max. 0.26 0.27 0.29 0.31 0.37 0.4 0.42 0.45 0.5 0.6 0.65 0.75 0.8 0.3 0.35 0.4 0.5 0.55 0.6 0.65 0.68 0.75 0.85 1 1.1 1.2 1.3 1.45 1.55 1.7 1.9 2.1 2.3 2.5 2.7 3.05 3.5 3.8 4.4 4.8 5.5 6.3 7.1 9.5 Rated current1 (mA)max. 530 500 480 450 420 410 400 380 360 340 320 300 280 550 500 460 430 420 400 375 350 325 300 260 245 230 220 210 200 195 185 180 175 170 165 160 155 150 140 130 125 115 110 90 Part No. NLV25T-010JNLV25T-012JNLV25T-015JNLV25T-018JNLV25T-022JNLV25T-027JNLV25T-033JNLV25T-039JNLV25T-047JNLV25T-056JNLV25T-068JNLV25T-082JNLV25T-R10JNLV25T-R12JNLV25T-R15JNLV25T-R18JNLV25T-R22JNLV25T-R27JNLV25T-R33JNLV25T-R39JNLV25T-R47JNLV25T-R56JNLV25T-R68JNLV25T-R82JNLV25T-1R0JNLV25T-1R2JNLV25T-1R5JNLV25T-1R8JNLV25T-2R2JNLV25T-2R7JNLV25T-3R3JNLV25T-3R9JNLV25T-4R7JNLV25T-5R6JNLV25T-6R8JNLV25T-8R2JNLV25T-100JNLV25T-120JNLV25T-150JNLV25T-180JNLV25T-220JNLV25T-270JNLV25T-330JNLV25T-390J- 2 1 Rated current: Value obtained when current flows and the temperature has risen to 20C or when DC current flows and the initial value of inductance has fallen by 10%, whichever is smaller. 2 : Please specify lead-free compatible product, PF (Conformity to RoHS directive, exemption regulations apply) or EF (Conformity to RoHS directive) * Test equipment L, Q: YHP4191A IMPEDANCE ANALYZER (16092A) [L 0.1H] YHP4194A IMPEDANCE ANALYZER (16085A+16093B+TDK TF-1) [L 0.12H] SRF:HP8753C NETWORK ANALYZER Rdc:MATSUSHITA VP-2941A DIGITAL MILLIOHM METER * All specifications are subject to change without notice. 001-03 / 20110927 / e511_nl (3/11) ELECTRICAL CHARACTERISTICS Inductance (H) 47 56 68 82 100 Inductance tolerance 5% 5% 5% 5% 5% Q typ. 20 20 20 20 15 Test frequency L,Q (MHz) 2.52 2.52 2.52 2.52 0.796 Self-resonant frequency (MHz)min. 17 16 15 13 12 Rated current1 (mA)max. 80 75 70 66 60 DC resistance ( )max. 11.1 12.1 16.6 19 21 Part No. NLV25T-470JNLV25T-560JNLV25T-680JNLV25T-820JNLV25T-101J- 2 1 Rated current: Value obtained when current flows and the temperature has risen to 20C or when DC current flows and the initial value of inductance has fallen by 10%, whichever is smaller. 2 : Please specify lead-free compatible product, PF (Conformity to RoHS directive, exemption regulations apply) or EF (Conformity to RoHS directive) * Test equipment L, Q: HP4194A IMPEDANCE/GAIN PHASE ANALYZER(16085A+16093B+TDK TF-1) SRF: HP8753C NETWORK ANALYZER Rdc: MATSUSHITA VP-2941A DIGITAL MILLIOHM METER TYPICAL ELECTRICAL CHARACTERISTICS INDUCTANCE vs. FREQUENCY CHARACTERISTICS 1000 IMPEDANCE vs. FREQUENCY CHARACTERISTICS 100 4194A IMPEDANCE/GAIN-PHASE ANALYZER 50 100H 100 4194A IMPEDANCE/GAIN-PHASE ANALYZER 100H 10 Impedance(k) Inductance(H) 5 22H 10H 10 4.7H 0.5 1H 1 10H 1 1H 0.1 0.05 0.1 1 Frequency(MHz) 10 40 1000 Test circuit 500 DC L=5H C=20000F A Specimen Inductance(H) HP model-4255A or equivalent 1 5 Frequency(MHz) 10 40 INDUCTANCE CHANGE vs. TEMPERATURE CHARACTERISTICS - 40 -20 100H 100H 100 0.5 0.1 Universal bridge INDUCTANCE CHANGE vs. DC SUPERPOSITION CHARACTERISTICS 0.02 L/L20C(%) 0.2 Test equipment: HP 4194A IMPEDANCE ANALYZER at 0.1MHz 5 4.7H 0 20 4.7H 100H 60 40 80 Temperature(C) -5 50 22H 10H 10 Q vs. FREQUENCY CHARACTERISTICS 4.7H 5 100 80 2.2H Test equipment: HP 4194A IMPEDANCE ANALYZER 4.7H Q 60 1 5 10 50 100 DC current(mA) 500 1000 1H 22H 10H 40 100H 20 0 0.1 1 Frequency(MHz) 10 * All specifications are subject to change without notice. 001-03 / 20110927 / e511_nl (4/11) Inductors for Standard Circuits Wound/STD Conformity to RoHS Directive NLV Series NLV32 FEATURES * This is a renewed version of NL322522. * The product has good heat durability that withstands lead-free compatible reflow soldering conditions. * Lead-free material is used for the plating on the terminal. * The electrical characteristics, reliability, shape and pad shape are the same as the previous NL series. * The product uses metal terminals, which realize excellent connection reliability. * Highly heat resistant thermoplastic resin is used to form the exterior package. * From 0.01H to 470H, all of the products in the E-12 series are J(5%) tolerance products. * This product is in compliance with the RoHS Directive. Other products with specifications that do not include exemption regulations are also available. FLOW SOLDERING 10s max. 260C max. Natural cooling 170C 150C Pre-heating 60 to 120s Time (s) IRON SOLDERING Tip temperature Heating time Soldering rod specifications 300 to 350C 3 seconds/soldering Output: 30W Tip diameter: 1mm * Based on the above conditions, use a maximum product temperature of APPLICATIONS * Audio-visual equipment including TVs, VCRs and digital cameras. * Electronic equipment used in communication infrastructures including xDSL and mobile base stations. * Electronic equipment used in onboard automobile equipment including car audio and ECU systems. * Other electronic equipment including HDDs and ODDs. 260C and a maximum accumulated heating time of 10 seconds as a guideline. * Please contact us for details. PRODUCT IDENTIFICATION NLV 32 T- 2R2 J - PF (1) (2) (3) (4) (5) (6) (1) Series name (2) Dimensions SPECIFICATIONS Operating temperature range Storage temperature range -40 to +105C [Including self-temperature rise] -40 to +105C 32 (3) Packaging style T RECOMMENDED SOLDERING CONDITIONS REFLOW SOLDERING 10s max. 255C 230C Natural cooling 3.2x2.5x2.2mm (LxWxT) Taping (reel) (4) Inductance value 010 R10 1R0 100 101 0.01H 0.1H 1H 10H 100H 180C (5) Inductance tolerance 150C J Pre-heating 90 to 120s 40s max. Time (s) 5% (6) Lead-free compatible product PF EF Conformity to RoHS directive, exemption regulations apply Conformity to RoHS directive PACKAGING STYLE AND QUANTITIES Packaging style Taping Quantity 2000 pieces/reel * Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications. * All specifications are subject to change without notice. 001-03 / 20110927 / e511_nl (5/11) SHAPES AND DIMENSIONS/RECOMMENDED PC BOARD PATTERN Inductor Pattern 470J 2.50.2 0.5 2.20.2 2 3.20.2 Terminal electrode (0.4) 1.2 2 1.2 Dimensions in mm 1.90.1 Weight: 50mg ELECTRICAL CHARACTERISTICS Inductance(H) Inductance tolerance Q min. Test frequency L,Q (MHz) 0.01 0.012 0.015 0.018 0.022 0.027 0.033 0.039 0.047 0.056 0.068 0.082 0.1 0.12 0.15 0.18 0.22 0.27 0.33 0.39 0.47 0.56 0.68 0.82 1 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10 12 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 15 17 19 21 23 23 25 25 26 26 27 27 28 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 100 100 100 100 100 100 100 100 100 100 100 100 100 25.2 25.2 25.2 25.2 25.2 25.2 25.2 25.2 25.2 25.2 25.2 7.96 7.96 7.96 7.96 7.96 7.96 7.96 7.96 7.96 7.96 7.96 7.96 2.52 2.52 Self-resonant frequency (MHz)min. 2500 2300 2100 1900 1700 1500 1400 1300 1200 1100 1000 900 700 500 450 400 350 320 300 250 220 180 160 140 120 100 85 80 75 70 60 55 50 45 40 35 30 20 DC resistance ( )max. Rated current1 Part No. (mA)max. 0.13 0.14 0.16 0.18 0.2 0.22 0.24 0.27 0.3 0.33 0.36 0.4 0.44 0.22 0.25 0.28 0.32 0.36 0.4 0.45 0.5 0.55 0.6 0.65 0.7 0.75 0.85 0.9 1 1.1 1.2 1.3 1.5 1.6 1.8 2 2.1 2.5 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 400 390 370 350 320 290 260 250 220 200 180 170 150 140 NLV32T-010JNLV32T-012JNLV32T-015JNLV32T-018JNLV32T-022JNLV32T-027JNLV32T-033JNLV32T-039JNLV32T-047JNLV32T-056JNLV32T-068JNLV32T-082JNLV32T-R10JNLV32T-R12JNLV32T-R15JNLV32T-R18JNLV32T-R22JNLV32T-R27JNLV32T-R33JNLV32T-R39JNLV32T-R47JNLV32T-R56JNLV32T-R68JNLV32T-R82JNLV32T-1R0JNLV32T-1R2JNLV32T-1R5JNLV32T-1R8JNLV32T-2R2JNLV32T-2R7JNLV32T-3R3JNLV32T-3R9JNLV32T-4R7JNLV32T-5R6JNLV32T-6R8JNLV32T-8R2JNLV32T-100JNLV32T-120J- 2 1 Rated current: Value obtained when current flows and the temperature has risen to 20C or when DC current flows and the initial value of inductance has fallen by 10%, whichever is smaller. 2 : Please specify lead-free compatible product, PF (Conformity to RoHS directive, exemption regulations apply) or EF (Conformity to RoHS directive) * Test equipment L, Q: YHP4191A IMPEDANCE ANALYZER (16092A) [L 0.1H] YHP4194A IMPEDANCE ANALYZER (16085A+16093B+TDK TF-1) [L 0.12H] SRF:HP8753C NETWORK ANALYZER Rdc:MATSUSHITA VP-2941A DIGITAL MILLIOHM METER * All specifications are subject to change without notice. 001-03 / 20110927 / e511_nl (6/11) ELECTRICAL CHARACTERISTICS Inductance(H) Inductance tolerance Q min. Test frequency L,Q (MHz) 15 18 22 27 33 39 47 56 68 82 100 120 150 180 220 270 330 390 470 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 30 30 30 30 30 30 30 30 30 30 20 20 20 20 20 20 20 20 20 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 0.796 0.796 0.796 0.796 0.796 0.796 0.796 0.796 0.796 Self-resonant frequency (MHz)min. 20 20 20 20 17 16 15 13 12 11 10 10 8 7 7 6 5 5 4 DC resistance ( )max. Rated current1 Part No. (mA)max. 2.8 3.3 3.7 5 5.6 6.4 7 8 9 10 10 11 15 17 21 28 34 36 40 130 120 110 80 70 65 60 55 50 45 40 70 65 60 50 45 40 35 25 NLV32T-150JNLV32T-180JNLV32T-220JNLV32T-270JNLV32T-330JNLV32T-390JNLV32T-470JNLV32T-560JNLV32T-680JNLV32T-820JNLV32T-101JNLV32T-121JNLV32T-151JNLV32T-181JNLV32T-221JNLV32T-271JNLV32T-331JNLV32T-391JNLV32T-471J- 2 1 Rated current: Value obtained when current flows and the temperature has risen to 20C or when DC current flows and the initial value of inductance has fallen by 10%, whichever is smaller. 2 : Please specify lead-free compatible product, PF (Conformity to RoHS directive, exemption regulations apply) or EF (Conformity to RoHS directive) * Test equipment L, Q: YHP4194A IMPEDANCE ANALYZER (16085A+16093B+TDK TF-1) SRF: HP8753C NETWORK ANALYZER Rdc: MATSUSHITA VP-2941A DIGITAL MILLIOHM METER TYPICAL ELECTRICAL CHARACTERISTICS INDUCTANCE vs. FREQUENCY CHARACTERISTICS Test equipment: RF IMPEDANCE ANALYZER 4191A, YHP 1000 4194A IMPEDANCE/GAIN-PHASE 1000 ANALYZER Test circuit 500 DC 500 0.5 220H 220H 100H 100 L=5H C=20000F A Specimen YHP model-4255A or equivalent Universal bridge 1 INDUCTANCE CHANGE vs. DC SUPERPOSITION CHARACTERISTICS 100H 100 0.1H 0.1 0.068H 0.047H 0.05 0.033H Inductance (H) Inductance (H) Inductance (H) 82H 50 10H 10 50 47H 18H 12H 10 8.2H 5 5 0.022H 0.015H 1H 1 0.01 0.05 1.5H 0.01H 1 0.5 0.5 1 5 10 50 100 Frequency (MHz) 500 1000 0.2 0.5 0.1 0.5 1 5 Frequency (MHz) 10 40 5 10 50 100 DC current (mA) 500 1000 * All specifications are subject to change without notice. 001-03 / 20110927 / e511_nl (7/11) Inductors for Standard Circuits Wound/STD Conformity to RoHS Directive NL Series NL453232 FEATURES * The product has good heat durability that withstands lead-free compatible reflow soldering conditions. * Lead-free material is used for the plating on the terminal. * The product uses metal terminals, which realize excellent connection reliability. * From 1H to 1000H, all of the products in the E-12 series are J(5%) tolerance products. * It is a product conforming to RoHS directive. APPLICATIONS * Electronic equipment used in communication infrastructures including xDSL and mobile base stations. * Audio-visual equipment including TVs and VCRs. * Other electronic equipment including HDDs and ODDs. IRON SOLDERING Tip temperature Heating time Soldering rod specifications 300 to 350C 3 seconds/soldering Output: 30W Tip diameter: 1mm * Based on the above conditions, use a maximum product temperature of 260C and a maximum accumulated heating time of 10 seconds as a guideline. * Please contact us for details. PRODUCT IDENTIFICATION NL 453232 T- 2R2 J - PF (1) (2) (3) (4) (5) (6) (1)Series name (2)Dimensions 453232 4.5x3.2x3.2mm (LxWxT) SPECIFICATIONS -40 to +105C [Including self-temperature rise] -40 to +105C Operating temperature range Storage temperature range (3)Packaging style T Taping (reel) (4)Inductance value RECOMMENDED SOLDERING CONDITIONS REFLOW SOLDERING 10s max. 255C 230C Natural cooling 1R0 100 101 102 1H 10H 100H 1000H (5)Inductance tolerance J 5% 180C 150C (6) Lead-free compatible product PF Pre-heating 90 to 120s Lead-free compatible product 40s max. PACKAGING STYLE AND QUANTITIES Time (s) Packaging style Taping Quantity 500 pieces/reel FLOW SOLDERING 10s max. 260C max. Natural cooling 170C 150C Pre-heating 60 to 120s Time (s) * Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications. * All specifications are subject to change without notice. 001-03 / 20110927 / e511_nl (8/11) SHAPES AND DIMENSIONS/RECOMMENDED PC BOARD PATTERN Painted for the convenience of positioning Inductor Pattern 102J 3.20.2 0.5 2.8 C0.5 3.20.2 4.50.3 Terminal electrode 1.5 (0.6) 2.60.1 3 1.5 Dimensions in mm Weight: 180mg ELECTRICAL CHARACTERISTICS Inductance (H) 1 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10 12 15 18 22 27 33 39 47 56 68 82 100 120 150 180 220 270 330 390 470 560 680 820 1000 Inductance tolerance 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% Q min. 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 40 40 40 40 40 40 40 40 40 30 30 30 30 Test frequency L, Q (MHz) 7.96 7.96 7.96 7.96 7.96 7.96 7.96 7.96 7.96 7.96 7.96 7.96 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 0.796 0.796 0.796 0.796 0.796 0.796 0.796 0.796 0.796 0.796 0.796 0.796 0.252 Self-resonant frequency (MHz)min. 100 80 70 60 55 50 45 40 35 33 27 25 20 18 17 15 13 12 11 10 10 9 9 8 8 6 5 5 4 4 3.5 3 3 3 3 2.5 2.5 DC resistance ( )max. 0.5 0.55 0.6 0.65 0.7 0.75 0.8 0.9 1 1.1 1.2 1.4 1.6 2 2.5 2.8 3.2 3.6 4 4.5 5 5.5 6 7 8 8 9 9.5 10 12 14 16 26 30 30 35 40 Rated current (mA)max. 450 430 410 390 380 370 355 330 315 300 285 270 250 225 200 190 180 170 160 150 140 135 130 120 110 110 105 102 100 92 85 80 62 50 50 30 30 Part No. NL453232T-1R0J-PF NL453232T-1R2J-PF NL453232T-1R5J-PF NL453232T-1R8J-PF NL453232T-2R2J-PF NL453232T-2R7J-PF NL453232T-3R3J-PF NL453232T-3R9J-PF NL453232T-4R7J-PF NL453232T-5R6J-PF NL453232T-6R8J-PF NL453232T-8R2J-PF NL453232T-100J-PF NL453232T-120J-PF NL453232T-150J-PF NL453232T-180J-PF NL453232T-220J-PF NL453232T-270J-PF NL453232T-330J-PF NL453232T-390J-PF NL453232T-470J-PF NL453232T-560J-PF NL453232T-680J-PF NL453232T-820J-PF NL453232T-101J-PF NL453232T-121J-PF NL453232T-151J-PF NL453232T-181J-PF NL453232T-221J-PF NL453232T-271J-PF NL453232T-331J-PF NL453232T-391J-PF NL453232T-471J-PF NL453232T-561J-PF NL453232T-681J-PF NL453232T-821J-PF NL453232T-102J-PF Rated current: Value obtained when current flows and the temperature has risen to 20C or when DC current flows and the initial value of inductance has fallen by 10%, whichever is smaller. * Test equipment L, Q: YHP4194A IMPEDANCE ANALYZER (16085A+16093B+TDK TF-1) SRF: HP8753C NETWORK ANALYZER (Zin=Zout=50) Rdc: MATSUSHITA VP-2941A DIGITAL MILLIOHM METER * All specifications are subject to change without notice. 001-03 / 20110927 / e511_nl (9/11) TYPICAL ELECTRICAL CHARACTERISTICS INDUCTANCE vs. FREQUENCY IMPEDANCE vs. FREQUENCY CHARACTERISTICS CHARACTERISTICS INDUCTANCE CHANGE vs. DC SUPERPOSITION CHARACTERISTICS 5000 1000H 470H 500 50k Test circuit C=20000F L=5H A DC Specimen 1000H 10k 5k 500 Impedance () Inductance (H) 1000 Inductance (H) 1000H 100H 100 100H 10 100 5 50 2 20 0.5 0.1 1 5 Frequency (MHz) 10 40 INDUCTANCE CHANGE vs. TEMPERATURE CHARACTERISTICS 0.1 0.5 L /L 20C (%) 3 20 --2 2 -3 -4 40 60 Temperature (C) 10H 330H 68H 18H 80 100 Test equipment: LCR model-4275A YHP, at 10kHz 1Vrms 10 50 100 500 DC current (mA) 1000 40 Test equipment: Q meter model-4340A, YHP 3.9H 470H 60 39H Q 1 0 -1 10 80 2 -20 1 5 Frequency (MHz) 2 Q vs. FREQUENCY CHARACTERISTICS 100 4 4.7H 5 1H 10H 10H 10 10H 500 50 47H 50 1k YHP model-4275A or equivalent 100H 100 Universal bridge 1000 4194A IMPEDANCE 100k GAIN-PHASE ANALYZER 4194A IMPEDANCE 10000 GAIN-PHASE ANALYZER 1H 10H 40 1000H 20 0 0.05 0.1 0.5 1 5 Frequency (MHz) 10 * All specifications are subject to change without notice. 001-03 / 20110927 / e511_nl (10/11) Inductors for Standard Circuits Wound/STD Conformity to RoHS Directive NL Series NL565050 FEATURES * The product has good heat durability that withstands lead-free compatible reflow soldering conditions. * Lead-free material is used for the plating on the terminal. * The product uses metal terminals, which realize excellent connection reliability. * It is a product conforming to RoHS directive. IRON SOLDERING APPLICATIONS * Electronic equipment used in communication infrastructures including xDSL and mobile base stations. * Audio-visual equipment including TVs and VCRs. * Other electronic equipment including HDDs and ODDs. PRODUCT IDENTIFICATION Tip temperature Heating time Soldering rod specifications 300 to 350C 3 seconds/soldering Output: 30W Tip diameter: 1mm * Based on the above conditions, use a maximum product temperature of 260C and a maximum accumulated heating time of 10 seconds as a guideline. * Please contact us for details. NL 565050 T- 122 J - PF (1) (2) (3) (4) (5) (6) (1)Series name (2)Dimensions SPECIFICATIONS -40 to +105C [Including self-temperature rise] -40 to +105C Operating temperature range Storage temperature range 565050 (3)Packaging style T RECOMMENDED SOLDERING CONDITIONS REFLOW SOLDERING 255C 230C Natural cooling 1.2mH 10mH (5)Inductance tolerance J 180C Taping (reel) (4)Inductance value 122 103 10s max. 5.6x5.0x5.0mm (LxWxT) 5% 150C (6) Lead-free compatible product Pre-heating 90 to 120s PF Lead-free compatible product 40s max. PACKAGING STYLE AND QUANTITIES Time (s) Packaging style Taping Quantity 400 pieces/reel FLOW SOLDERING 10s max. 260C max. Natural cooling 170C 150C Pre-heating 60 to 120s Time (s) * Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications. * All specifications are subject to change without notice. 001-03 / 20110927 / e511_nl (11/11) SHAPES AND DIMENSIONS/RECOMMENDED PC BOARD PATTERN Inductor Pattern 472J 50.3 1 Terminal electrode 4.5 C1 50.3 5.60.3 (0.5) 2 40.2 4 2 Dimensions in mm Weight: 380mg ELECTRICAL CHARACTERISTICS Inductance (mH) 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10 Inductance tolerance 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% Q min. 30 30 30 30 30 30 30 30 30 30 30 20 Test frequency L, Q (MHz) 0.252 0.252 0.252 0.252 0.252 0.252 0.252 0.252 0.252 0.252 0.252 0.0796 Self-resonant frequency (MHz)min. 1.5 1.4 1.3 1.2 1.1 1 1 0.9 0.8 0.7 0.6 0.5 DC resistance ( )max. 17 20 30 35 55 60 70 78 85 110 125 150 Rated current (mA)max. 75 70 60 55 45 40 38 36 33 30 28 25 Part No. NL565050T-122J-PF NL565050T-152J-PF NL565050T-182J-PF NL565050T-222J-PF NL565050T-272J-PF NL565050T-332J-PF NL565050T-392J-PF NL565050T-472J-PF NL565050T-562J-PF NL565050T-682J-PF NL565050T-822J-PF NL565050T-103J-PF Rated current: Value obtained when current flows and the temperature has risen to 20C or when DC current flows and the initial value of inductance has fallen by 10%, whichever is smaller. * Test equipment L, Q: YHP4194A IMPEDANCE ANALYZER (16085A+16093B+TDK TF-1) SRF: HP8753C NETWORK ANALYZER (Zin=Zout=50) Rdc: MATSUSHITA VP-2941A DIGITAL MILLIOHM METER 50 DC L=5H C=20000F A Specimen Inductance (mH) YHP model-4275A or equivalent 10 4 10mH L / L 20C(%) Test circuit Universal bridge 100 INDUCTANCE CHANGE vs. TEMPERATURE CHARACTERISTICS 0 Test equipment:Q meter model-4343B, YHP 80 2 1.8mH 3.3mH 5.6mH 10mH 60 2.2mH 40 -2 -4 2.7mH 0.5 100 YHP 4194A IMPEDANCE ANALYZER at 10kHz 0.5V 20 5.6mH 5 1 Q vs. FREQUENCY CHARACTERISTICS Q TYPICAL ELECTRICAL CHARACTERISTICS INDUCTANCE CHANGE vs. DC SUPERPOSITION CHARACTERISTICS - 40 - 20 0 20 40 60 Temperature (C) 80 100 0 0.1 0.5 1 5 Frequency (MHz) 10 1.2mH 10 50 100 DC current (mA) 500 * All specifications are subject to change without notice. 001-03 / 20110927 / e511_nl