Old Part Number N086PH12-16 PDF Data Sheet Available RECTIFIER DEVICE - Phase Control Thyristors - Stud Types N VDRM VRRM Range IT(AV) at TSINK 25oC IT(RMS) at o TSINK 25 C New Part Number IT at TSINK 25oC Note 5 N0131SP120-160 ITSM(1) 10ms ITSM(2) 10ms VR 60% VR 10V VRRM VRRM di/dt Non-Rep /Rep I2t(2) IGT/VGT at 25oC IDRM IRRM at o 125 C 25oC Vo Rth j-c IH at Rth c-s dc 120o Rect 180osine r at Tj 125oC Note 2 VTM at ITM Wt (typ.) Mounting Torque at Tj 125oC Note 1 Note 1 Note 1 Note 4 (A/ s) (mA)/(V) (mA) (mA) (K/W) (K/W) (K/W) (V) (m ) (V) / (A) (g) (kgfm-1) (V) (A) (oC) (A) (A) (A) (A) (A2s) 1200-1600 131 (55) 175 175 1700 1950 19 x 103 1000/500 150/3 20 600 0.23 0.28 0.08 1.57 2.29 2.29/315 130 1.45 - 1.15 3 N105PH12-16 N N0180SP120-160 1200-1600 180 (55) 175 175 2450 2695 36.3 x 10 1000/500 150/3 20 600 0.23 0.28 0.08 0.90 1.79 1.46/315 130 1.45 - 1.15 N170PH12-16 N N0290SP120-160 1200-1600 290 (55) 355 355 4200 4620 107 x 103 1000/500 150/3 20 600 0.12 0.14 0.04 1.08 1.30 1.98/690 280 2.77 - 2.5 3 N195PH12-16 N N0335SP120-160 1200-1600 335 (55) 355 355 4650 5120 131 x 10 1000/500 150/3 20 600 0.12 0.14 0.04 0.92 0.99 1.60/690 280 2.77 - 2.5 N275PH02-08 N N0416SP020-080 200-800 416 (55) 355 355 6000 6600 218 x 103 1000/500 150/3 20 400 0.12 0.14 0.04 0.85 0.535 1.22/690 280 2.77 - 2.5 The information contained herein is confidential and is protected by Copyright. The information may not be used or disclosed except with the written permission of and in the manner permitted by the proprietors Westcode Semiconductors Limited. Note 1 Note 2 Note 3 Note 4 Note 5 In the interest of product improvement, Westcode reserves the right to change specifications at any time without prior notice. I2t (8.3ms) = I2t (10ms) x 0.943 ITSM (8.3ms) = ITSM (10ms) x 1.066 Vo Threshold Voltage for conduction loss and heatsink calculations. (Tj = 125oC) r Slope resistance A blocking voltage derating factor of 0.13% per degree centigrade is applicable for Tj below 25oC di/dt ratings refer to the sum of snubber discharge and load currents. Outline 101A153 - leaded types available, code changes from RH to PH. Lead length 146mm (base of hexagon to centre of lug hole). ) Outline No. (Note 4) 101A235 or 101A231 101A225