Partition | LES SZ / O The partitions increase insulation of the power terminal blocks EC EcP This type of partition can be mounted only on TYPE | power | -3 pidesctive cover Protects the user from accidental touch on live circuits. CP CPM terminal blocks It can recetve a cover on 1, 2 or 3 biocks, see CPP. This cover ts snapped onto the SCF separators. It can also be u ibe An ECP partition can also recetve a PEP marker-hoider See section on markers, standard Part numbers for partitions for power terminals with spacing of 138 689.24 26mm _ ECP26 31mm_ ECP31 113 690.21 35mm _ ECP35 113 691.16 52mm _ ECP42 113 692.17 ECS This type of partition can be mounted only on TYPE Ii power terminal blacks !t can receive a PEP marker-holder. See section on markers, standard. Part numbers for partitions for the following blocks M 35/26 - M 35/26.EE - M 35/26.AE - M 70/31.EE ECS26 168 838 00 M 70/31 AE - M 400/52.AE ECS31 168 839 01 M 150/35.EE ECS35 168 841.03 M 95/35 - M 120/35 AE ECS351 168 842 04 M 185/42.EE - M 300/42 EE1 - M 300/42.AE and AE1 ECS42 168 843 05 M 300/42.EE ECS421 168 844 06 M 400/52 EE and EE1 Ecs52 168 840 16 for marking the termina! untt by means of a blank strip RTC, which slides into the cover See sectian on markers, standard er 20 20 TP | 28 | Width 32 mm/1 26, in length of 500 mm/19 70 CPM CPP This type of cover fits only on ECP partitions (for TYPE | power terminal blocks) !t snaps onto the partition and increases the spacg by 1,5 mm .059" For each spacing, there are 3 cover sizes, for 1, 2 or 3 blocks wl Part numbers for covers for power terminal blocks with spacing of 26mm- 1 block CPP261 168 20219 - 2 blocks cPP262 168 20112 - 3 blocks CPP263 ~r 163 403.29 31mm - 1 block CPP311 168 204.8 - 2 blocks CPP312 168 203 4 3 blocks CPP313 163 409 08 35mm- 1 block CPP351 168 206 17 2 blocks CPP352 168 205.4 - 3 blocks CPP353 163 41828 42mm- 1 block CPP421 168 208.21 - 2 blocks CPP422 168 207 18 - 3 blocks CPP423 163 4268 = This type of cover is mounted directly on the body of the power terminal blocks cPu 5 markers RC610 on each side Part numbers for covers for power terminal blocks with spacing of 26 mm CPU26 31 mm CPU31 35 mm CPU35 42 mm CPU42 52 mm CPUS2 entrelec 36 187 312 4 i Wage Wet rege gps