HT-SCE High temperature, low outgassing heat-shrinkable wire identification sleeves
6Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Heat-Shrink/Cable Markers
Heat Shrink/Cable Markers
Wire and Harness ID Products
HT-SCE - 1K-1/4-2.0-S1-0
Part numbering system
Color
Scoring (optional)
Sleeve length (inches)
Expanded inside diameter (inches)
Pack size
Product family
HT-SCE wire markers are designed for use in high temperature
applications or where extreme resistance to fuels, lubricants and
cleaning solvents is required. They are also ideal for applications in
which low-vacuum outgassing is of high importance. The marker
sleeves are made of highly flame retardant, heat-shrinkable fluo-
ropolymer tubing.
HT-SCE markers are supplied as a thin, flat “ladder” of sleeves held
horizontally between two polyester strips. This configuration feeds
directly from the storage box into standard Tyco Electronics
recommended printers, with no modifications necessary. A strip of
adhesive tape on each side of the sleeves holds them securely in
place for printing and kitting, yet the sleeves pull easily from the
carrier strips. A standard heat gun with reflector is used to shrink
the sleeves onto the wire or cable to achieve a permanent mark.
After shrinking, HT-SCE markers meet the print performance
requirements of SAE AS81531 4.6.2 and MIL-STD-202. HT-SCE
markers are supplied in boxes of 1000 sleeves and are available
in nine diameter sizes. These cover substrates from 0.8mm to
34.0mm. Because of this versatility, customers need not carry a
large inventory of markers.
Features and benefits
Permanent identification sleeves
High continuous operating temperature
Extreme fluid resistance
Low-vacuum outgassing
Wide range of sleeve sizes for several wire
and bundle diameters
Temperature rating
Operating temperature range –55°C to +225°C –67°F to +437°F
Minimum recovery temperature +200°C +392°F
Maximum storage temperature +40°C +104°F
Specifications/approvals
Tyco Electronics RW 2512
TTDS-020
Military SAE AS 81531 4.6.2
MIL-STD-202 Method 215J
Printer information
Tyco Electronics printer T312M (thermal transfer)
Tyco Electronics ribbon TMS-RJS-RIBBON-4HT (thermal transfer)
NOT the LATEST
REVISION
OBSOLETE
Heat Shrink/Cable Markers
Wire and Harness ID Products
HT-SCE High temperature, low outgassing heat-shrinkable wire identification sleeves
7
Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Heat-Shrink/Cable Markers
Ordering information
Available sizes and formats
Inside diameter
Ordering D (min) d (max) Recommended
description As supplied After recovery use range
mm
inches
mm
inches
mm
inches
HT-SCE-1K-3
/32 -2.0- <color> 2.36 0.093 0.79 0.031 0.81 - 1.90 0.032 - 0.075
HT-SCE-1K -1/8-2.0- <color> 3.18 0.125 1.58 0.062 1.75 - 2.66 0.069 - 0.105
HT-SCE-1K-3
/16 -2.0- <color> 4.75 0.187 2.36 0.093 2.54 - 4.06 0.100 - 0.160
HT-SCE-1K-1/4-2.0- <color> 6.35 0.250 3.18 0.125 3.40 - 6.00 0.134 - 0.236
HT-SCE-1K-3/8-2.0- <color> 9.53 0.375 4.75 0.187 5.30 - 8.10 0.209 - 0.319
HT-SCE-1K-1/2-2.0- <color> 12.70 0.500 6.35 0.250 6.60 - 11.40 0.260 - 0.449
HT-SCE-1K-3
/4-2.0- <color> 18.00 0.709 9.00 0.354 9.90 - 15.30 0.390 - 0.602
HT-SCE-1K-1-2.0- <color> 25.40 1.000 12.70 0.500 13.30 - 23.00 0.524 - 0.906
HT-SCE-1K-11/2-2.0- <color> 38.10 1.500 19.05 0.750 20.95 - 34.00 0.825 -1.339
Total width as supplied 90.18 mm (3.550 inches) including tape and carrier width.
Options
Prescoring Perforated score to produce multiple marker sleeves from each HT-SCE sleeve
Number of prescores 1 prescore 2 prescores 3 prescores
Code S1 S2 S3
Package size Standard 1K - 1000 piece packs
Nonstandard Larger pack sizes are available. Please contact Tyco Electronics.
Colors Standard White Black
Code 9 0
Nonstandard Pink Blue Yellow
Code 2L 6 4
Ordering information: Specify product name, pack size, sleeve size, prescore, format and color.
Ordering example: HT-SCE-1K-1/4-2.0-S1-9
SOG-ER33-3 BT-M
50mm
(nom)
SOG-ER32-3 BT-M
SOG-ER13-3 BT-M
Dd
