MIL-DTL-38999 III subminiature cylindrical connectors
DESCRIPTION
The TV-CTV connectors are in accordance
with MIL-DTL-38999 series III standard.
These connectors offer the highest
performance capabilities for both general
duty and severe environment applications.
Besides the most commonly used aluminium
shell, different shell materials are available:
• The composite connector is a
lightweight (17 to 70 % weight savings),
corrosion resistant ( withstanding 2000
hours of salt spray exposure) connector
• The nickel aluminium bronze connector
offers a high corrosion resistance and
robustness for marine applications
• The stainless steel connector
provides a firewall capability
The Amphenol TV connectors range also
offers the following specific versions:
• Ground Plane version with a
conductive insert for specific use with
coaxial or triaxial contacts
• Receptacles with reinforced sealing
• Hermetic version in Y and N classes
• Filtered versions using tubular or
planar technology (please consult us)
GENERAL CHARACTERISTICS
Main features
• Shell material
- Composite
- Aluminium
- Marine bronze
- Stainless steel
• Finish
- Olive drab cadmium plating
- Nickel plating
- Passivation (for steel versions)
• 9 shell sizes from 09 to 25
• Contacts
- More than 60 arrangements of contacts, including high density versions
- Size 8, 10, 12, 16, 20, 22 D contacts
- Signal, power, twinax, coaxial contacts, MOV, optical termini
• Contact protection
- 100% scoop-proof shell
- Interfacial seal ensures sealing around each contact and prevents
electrolytic erosion
• EMI/RFI protection
- Shell to shell bottoming
- Grounding fingers on the plug shell
• Quick coupling
completely mates and self locks in a 360° turn of the coupling nut
• Performs sine and random vibration tests by an anti-decoupling device
• Receptacles are intermountable with MIL-DTL-38999 series I standard
(same panel drilling)
Additional information
Amphenol Socapex offers a global solution: besides the TV-CTV wide range
of connectors, the following products are available (please consult data
sheets):
• Contacts
(please refer to data sheet E114)
• Tooling
(please refer to data sheet E119)
• Rear accessories
(please refer to data sheet E121)
• FTV filtered connectors
(French version only)
E113/C
High
performance
threaded
cylindrical
connectors
High
performance
threaded
cylindrical
connectors
Tri-StartTM
TV-CTV
APPLICATIONS
• Military and aeronautic
applications: battlefields,
ground vehicles, aircrafts
• Advanced industrial
applications: high vibration
requirements, high density
TV-CTV
Amphenol
QPL APPROVED
TV CTV - E113/D 20/12/01 16:41 Page 3
2
TV-CTV
TABLE OF CONTENTS
GENERAL CHARACTERISTICS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
TECHNICAL CHARACTERISTICS
• Mechanical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
• Environmental characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
• Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
• Insert arrangements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
• Coding – Polarization . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
CTV COMPOSITE SHELLS
• Presentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
• Overall dimensions . . . . . . . . . . . . . Square flange receptacle . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Jam nut receptacle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Straight plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
TV METALLIC SHELLS
• Aluminium shells presentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
• Bronze shells presentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
• Stainless steel shells presentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
• Overall dimensions . . . . . . . . . . . . . Square flange receptacle . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Jam nut receptacle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Straight plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
PANEL DRILLING FOR COMPOSITE AND METALLIC RECEPTACLES . . . . . . . . . . . . . . . . . . . . . . 15
PRINTED CIRCUIT BOARD DRILLING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
DATA BUS “GROUND PLANE” RECEPTACLES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
TVS-Y/TVS-YN HERMETIC RECEPTACLES
• Presentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
• Overall dimensions . . . . . . . . . . . . . Square flange receptacle . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Jam nut receptacle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Solder mounting receptacle . . . . . . . . . . . . . . . . . . . . . . . . 21
LANYARD RELEASE PLUGS
• Presentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
• Overall dimensions . . . . . . . . . . . . . Lanyard release plug – MIL-STD-1760 . . . . . . . . . . . . . . . . 22
Lanyard release plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
ACCESSORIES
• Protection caps. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
• Plastic dust caps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
• Standard contacts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
• Sealing plugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
• Holding support with dummy receptacles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
• Torque value for rear accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
TOOLING
• Crimping tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
• Insertion and removal tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
CONNECTORS ORDERING INFORMATION
• Composite and metallic versions . . . Amphenol designation (TV/CTV) . . . . . . . . . . . . . . . . . . . . 27
Military designation (JD38999) . . . . . . . . . . . . . . . . . . . . . 28
• Data bus “ground plane” receptacles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
• Hermetic versions . . . . . . . . . . . . . . Amphenol designation (TV) . . . . . . . . . . . . . . . . . . . . . . . . 29
Military designation (JD38999) . . . . . . . . . . . . . . . . . . . . . 29
• MIL-STD-1760 Lanyard release plugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
• Lanyard release plugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
• Cross references (Amphenol and military designations) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
TV CTV - E113/D 20/12/01 16:41 Page 4
3
TECHNICAL CHARACTERISTICS
TV-CTV
10
11
6
7
9
8
13
1
9
7
12
14
4
2
5
Shell size
Series III Amphenol Bending moment
MIL-DTL-38999
A 09 11.3
B 11 33.9
C 13 45.2
D 15 56.5
E 17 67.8
F 19 79.1
G 21 90.4
H 23 101.7
J 25 113.0
Contact size 22D 20 16 12 10 8
Maximum load (N) 45 67 110 110 150 150
1Locking ring 8Receptacle shell
2Quick coupling thread 9Contact retention clips
3Ratchet 10 Crimping pin contact
4Anti decoupling device 11 Crimping socket contact
5Plug shell 12 Interfacial seal
6Spring fingers (EMI) 13 Socket insert
7Grommet 14 Pin insert
Mechanical characteristics
•Thermoplastic insert
•Silicone rubber back insert and interfacial seal
•Durability: - 500 cycles
- 1500 cycles with composite connector " CTV " fitted with " H " and " J " contact types
•Shocks: half sine wave of 300 G magnitude during 3ms per MIL - STD - 0901
•Sine vibrations: - 60 g from - 55°C to + 175°C (olive drab cadmium finish)
- 60 g from - 55°C to 200°C (nickel finish and firewall version)
•Random vibrations: - 1 G2/ Hz at 175°C olive drab cadmium finish
- 1G2/ Hz at 200°C nickel finish and firewall version
- 5G2/ Hz at ambient
•Bending moment
•Contact retention force
TV CTV - E113/D 20/12/01 16:41 Page 5
4
TECHNICAL CHARACTERISTICS
Shell Shell Salt spray Class Amphenol Working temperature
material finish exposure norm
per MIL. STD 1344/1009 mini maxi
Composite Electroless Nickel 2000 H M CTV-RF -65°C +200°C
O.D cadmium 2000 H J CTV-RW -65°C +175°C
Aluminium Electroless Nickel 48 H F TVS-RF -65°C +200°C
O.D cadmium 500 H W TV-RW -65°C +175°C
Stainless Nickel 48 H S TVS-RS -65°C +200°C
steel —500 H K TVS-RK -65°C +200°C
Bronze —1000 H TVS-RB -65°C +200°C
Shell Shell Salt spray Class Amphenol Working temperature
material finish exposure norm
per MIL. STD 1344/1009 mini maxi
Stainless Nickel 48 H N TVS-YN -65°C +200°C
steel — 500 H Y TVS-Y -65°C +200°C
Environmental characteristics
•Salt spray exposure and working temperature:
•Waterproof shells
•Humidity: per MIL-DTL-38999: § 3.29
•Altitude immersion: according to MIL-DTL-38999 III standard (exept hermetics)
•Air leakage < 1.10 - 7 cm3/s under 1 bar of pressure differential (hermetics only)
•Fluid resistance (per MIL-DTL-38999), § 3.33:
•MIL-L-7808 (lubricating oil)
•MIL-L-23699 (lubricating oil)
•MIL-H-5606 (hydraulic fluid)
•Hydraulic fluid (Chevron M2V)
•MIL-A-8243 (defrosting fluid)
•MIL-C-87936 type I
•MIL-T-5624 (JP5)
•MIL-C-47220 or Coolanol 25 or equivalent
•MIL-G-3056 type I (gasoline)
•Isopropyl alcohol per TT-I-735 grade A or B mixed with mineral spirit TT-T-291 type I
or P-D-680 type I
•Hermetic shells
TV CTV - E113/D 20/12/01 16:41 Page 6
5
TECHNICAL CHARACTERISTICS
TV-CTV
Electrical characteristics
Dielectric withstanding voltage (Vrms)
Service At sea level 15000 meters 21000 meters 34000 meters Working voltage
mated unmated mated unmated mated unmated mated unmated Vrms Vdc
M 1300 1300 800 550 800 350 800 200 400 550
N 1000 1000 400 260 200 300 450
I 1800 1800 1000 600 1000 400 1000 200 600 850
II 2300 2300 1000 800 1000 500 1000 200 900 1250
Contact Contact Crimp barrel Acceptable cables
Size Diameter Diameter Depth Gauge AWG Outside diameter (mm)
mm mm mm Section mm
2
Min Average Max
22D 0.76 0.88+/-0.03 3.58 22 24 26 28 0.76 1.20 1.37
0.38 0.22 0.15 0.095
20 1 1.19+/-0.03 5.30 20 22 24 1.02 1.83 2.11
0.60 0.38 0.22
16 1.57 1.70+/-0.03 5.30 16 18 20 1.68 2.41 2.77
1.34 0.93 0.60
12 2.36 2.54+/-0.06 5.30 12 14 2.46 3.20 3.61
3.30 1.94
10 3.17 3.48+/-0.06 9 10 12 2.97 3.88
53
8 3.60 4.6+0.05/-0 10 8 4.5 5.8
Power 8.98 Max acceptable: 10mm
2
Insulation resistance (500 V) Crimp Hermetic
Ambient temperature ≥10
5
MΩ≥5 x 10
3
MΩ
Maximum temperature ≥10
3
MΩ≥5 x 10
2
MΩ
Contact size 22D 20 16 12 10 8
Crimp (A) 5 7.5 13 23 33 60
Hermetic (A) 3 5 10 17 — —
Contact size 22D 20 16 12 10 8
Contact resistance (mΩ)8 4.7 2 1.1 0.6 0.6
•Contact rating: nominal current per contact
•Contact resistance
•Insulation resistance
•Service rating
•Dimensions of acceptable contacts and cables
TV CTV - E113/D 20/12/01 16:41 Page 7
6
INSERT ARRANGEMENTS
E 35
17-35
M
55
22D
Y
Y
17-75
2
8
Twinax
E 99
17-99
I
21 2
20 16
AB
C
D
E
F
G
H
1
3
4
9
10
16
17
24 31
25
32 40
47
53
55
52
46
39
A
B
J
K
L
M
N
PR
ST
U
V
W
X
YZ
A
B
C
D
E
F
G
H
J
K
L
F 11
19-11
II
11
16
1
2
3
4
5
D 05
15-5
M
5
16
YYY
D 15
15-15
I
14 1
20 16
D 18
15-18
I
18
20
D 19
15-19
I
19
20
D 35
15-35
M
37
22D
A
B
CD
E
P
AB
C
D
E
F
G
H
J
K
L
M
NR
A
B
C
D
E
F
G
H
J
K
LMN
P
RS
TU
AB
C
D
E
F
G
H
J
K
L
M
NP
R
S
T
UV
1
31
1
2
3
4
5
D 97
15-97
I
8 4
20 16
Y
AB
C
D
E
F
G
H
J
K
L
M
E 6
17-6
I
6
12
A
B
C
D
E
F
Y
E 8
17-8
II
8
16
A
B
C
D
E
F
G
H
Y
E 26
17-26
I
26
20
AB
C
D
E
F
G
H
J
K
L
M
N
P
T
U
V
W
X
Y
Z
aSb
c
R
1
2
3
4
5
B 35
11-35
M
13
22D
YY Y Y Y
1
2
3
4
5
6
7
8
9
10
11
1213
B 98
11-98
I
6
20
A
D
B
C
EF
C 4
13-4
I
4
16
A
B
C
D
C 8
13-8
I
8
20
A
B
C
D
E
F
G
H
C 98
13-98
I
10
20
AB
C
D
E
F
G
H
JK
C 35
13-35
M
22
22D
1
22
11-99
I
7
20
A
D
B
C
E
FG
1
2
3
4
5
A 35
9-35
M
6
22D
YY
A 98
9-98
I
3
20
11-01
1
8
Twinax
11-12
1
12
B 2
11-2
I
2
16
B 5
11-5
I
5
20
1
2
3
4
5
6
A
CB
9-94
I
2
20
A
BA
ABA
B
C
D
E
1
2
3
4
5
Coax Twinax
A
B
C
D
17-22
2
12 8
2
1
2
3
4
5
67
89
10 11
12
13
14
15
16
A
B
C
D
17-20
M
4
22D 12
16
17-2
M
22D 8 Twinax
38 1
1
6
11
17
30
MIL insert arrangement reference
TV-CTV insert arrangement reference
Service class
1
2
3
Number of contacts
Contact sizes
4
5
Insert arrangements
Contact size 10 8
12
162022D
Caption
Front face view of male insert
The major keyway is shown in the «normal» position
TV CTV - E113/D 20/12/01 16:41 Page 8
7
INSERT ARRANGEMENTS
TV-CTV
F 32
19-32
I
32
20
F 35
19-35
M
66
22D
A
B
C
D
E
F
G
H
J
K
L
M
N
P
R
ST
U
V
W
X
Y
Z
a
b
c
d
e
j
f
g
h
1
2
3
9
410 17 25
16 24 33
34
42
43
50
51
57 63
58
64
66
65
19-28
I
26 2
20 16
19-17
M
10
22D 20 16 8 Twinax
YY
19-30
I
29 1
20 16
19-31
M
2 1 12
8 Coax 12 22D
412
AB
C
D
E
F
G
H
J
K
L
M
N
P
RST
U
V
W
X
Y
Z
a
b
c
de
A
B
C
D
E
F
G
H
J
K
L
M
N
P
R
T
S
U
V
W
X
Y
Z
a
b
c
d
e
gf
A
V
W
UCB
g
h
S
RM
NKE
B
A
C
D
E
FG
H
J
K
L
M
N
T
SP
R
1
2
3
4
5
G 11
21-11
I
11
12
G 16
21-16
II
16
16
Y
G 35
21-35
M
79
22D
G 39
21-39
I
37 2
20 16
A
B
C
D
E
F
G
H
J
K
L
A
B
C
D
E
F
G
H
J
K
L
M
N
P
R
S
21
41
61 71
11
31
51
79
1AB
C
D
E
F
G
H
J
K
L
M
N
P
R
S
T
U
VW
X
Y
Z
a
b
c
d
e
f
g
h
i
j
k
mr
qn
p
1
2
3
4
5
21-48
M
4
8 Power
G 75
21-75
M
4
8 Coax or 8 Twinax*
23-6
M
6
8 Twinax
G 41
21-41
I
41
20
Y
AB
C
D
E
F
G
H
J
K
L
M
N
P
R
S
T
U
VW
X
Y
Z
a
b
c
d
e
f
g
h
i
j
k
m
n
p
q
r
s
t
A
B
C
DA
B
C
D
A
B
C
F
D
E
1
2
3
4
5
H 21
23-21
II
21
16
H 35
23-35
M
100
22D
H 53
23-53
I
53
20
A
B
C
D
E
F
G
H
J
K
L
M
N
P
R
S
T
U
V
W
X
1
2
3
4
5
6
7
816 25 35 46 56 67 77 86
94
95
96
97
98
99
100
93
85
76
55 66
45
34
24
15
AB
C
D
E
F
G
H
c
J
K
L
M
N
P
RST
UV
W
p
qr
X
BB
CC s
Y
HH
DD t
Z
EE
ua
v
b
mn
k
zAA
h
yGG
g
xFF
f
ew
d
23-54
M
40 9 4
22D 16 12
H 55
23-55
I
55
20
123
4
5
6
26
27
28
29
7
8
9
10
11
12
34 33 32
31
30
52 45 46
51 53 47
50 49 48
25
35
40
19
20
21 22 23 24
44
43
42
41
18
17
16
15 14 13
36
37
38
39
AB
C
D
E
F
G
H
J
K
L
M
N
P
R
S
TUVW
X
Y
Z
a
b
c
d
e
f
g
h
i
j
k
m
n
p
q
r
s
t
u
v
w
x
y
zAA
BB CC
DD
EE
FF
GG
HH
23-32
I
32
20
A
B
C
D
E
F
G
H
J
K
L
M
N
P
R
S
T
U
V
W
X
Y
Z
a
a
b
c
d
e
f
g
j
1
2
3
4
5
YYY
J 4
25-4
I
48 8
20 16
25-8
8
8 Twinax
A
B
C
D
E
F
G
H
A
B
C
D
E
F
G
H
J
K
L
25-7
M
2
22D
8 Twinax
J 11
25-11***
N
2 9
20
10 Power
ABC
D
G
H
J
K
L
M
N
P
R
S
T
U
V
W
X
YZ
b
c
d
e
f
g
h
k
mn
p
q
r
s
t
u
v
w
x
y
z
AA
BB
CC
DD
EE
FF
GG
HH
JJ
KK
LL
a
E
F
R
1
6
15
21 28
19
26
33 42
53
78 84
93
99
60 68 82
76
94
7
16
18
24
22
32 41
46
59 67
74
72
81
79
85
29 64
7
36
37
1
2
3
4
5
97
Insert arrangements
MIL insert arrangement reference
TV-CTV insert arrangement reference
Service class
1
2
3
Number of contacts
Contact sizes
4
5
Contact size 10 8
12
162022D
Caption
Front face view of male insert
The major keyway is shown in the «normal» position
TV CTV - E113/D 20/12/01 16:41 Page 9
8
INSERT ARRANGEMENTS
Insert arrangements
* Military P/N delivered with 8 twinax and proprietary P/N delivered with size 8 coaxial contacts for
RG 180 and RG 195 wire
*** For MIL STD 1760 application
Y Available in hermetic version
Delivered with twinax contacts for double braid cable (PAN 6421, AECMA Pr EN 3375 - 004,
Raychem 10613, EPD44692, EPD44693).
Delivered with twinax contacts for simple braid cable (M17/1760002, AECMA Pr EN 3375 - 003,
Raychem 10612, EPD44690, EPD44691).
MIL insert arrangement reference
TV-CTV insert arrangement reference
Service class
1
2
3
Number of contacts
Contact sizes
4
5
Contact size 10 8
12
162022D
Caption
Front face view of male insert
The major keyway is shown in the «normal» position
TV CTV - E113/D 20/12/01 16:41 Page 10
9
INSERT ARRANGEMENTS
TV-CTV
Arrangements Service Total Number and size of contacts
Class number of
CTV TV contacts 22D 20 16 16G** 12 12 12G** 10 8 8 8 triax 8G**
coax power power coax of twinax P S
9-5** 9-5** 1 1XX
9-35 9-35 M 6 6
9-94 9-94 M 2 2
9-98 9-98 I 3 3
11-1 11-1 1 1
11-2** 11-2** 2 2 X
11-2 11-2 I 2 2
11-5 11-5 I 5 5
11-12 11-12 II 1 1
11-35 11-35 M 13 13
11-98 11-98 I 6 6
11-99 11-99 I 7 7
13-4** 13-4** 4 4 X
13-4 13-4 I 4 4
13-8 13-8 I 8 8
13-35 13-35 M 22 22
13-98 13-98 I 10 10
15-5** 15-5** 5 5 X
15-5 15-5 II 5 5
15-15 15-15 I 15 14 1
15-18 15-18 I 18 18
15-19 15-19 I 19 19
15-35 15-35 M 37 37
15-97 15-97 I 12 8 4
17-2 17-2 M 39 38 1
17-6** 17-6** 6 6 X
17-6 17-6 I 6 6
17-8** 17-8** 8 8 X X
17-8 17-8 II 8 8
17-20 17-20 M 20 16 4
17-22** 17-22** 4 2 2 X
17-22 17-22 4 2 2
17-26 17-26 I 26 26
17-35 17-35 M 55 55
17-75 17-75 I 2 2
17-99 17-99 I 23 21 2
19-11 19-11 II 11 11
19-17 19-17 M 17 10 1 4 2
19-28 19-28 I 28 26 2
19-30 19-30 I 30 29 1
19-31 19-31 M 15 12 1 2
19-32 19-32 I 32 32
19-35 19-35 M 66 66
21-11 21-11 I 11 11
21-16** 21-16** 16 16 X
21-16 21-16 II 16 16
21-35 21-35 M 79 79
21-39 21-39 I 39 37 2
21-41 21-41 I 41 41
21-48 21-48 4 4
21-75 21-75 M 4 4
21-75** 21-75** 4 4X
Grounded insert
availability**
Legend: ** Grounded version (metallic insert for use with coaxial or twinax contacts, for receptacle only). For details, please refer to page 19
*** 25-11 and 25-20 arrangements used for interconnection per MIL-STD-1760
TV CTV - E113/D 20/12/01 16:41 Page 11
10
INSERT ARRANGEMENTS
RECEPTACLE — Front face shown
Major key
AR°
BSC
BR°
BSC
CR°
BSC
DR°
BSC
Major key
AP°
BSC BP°
BSC
CP°
BSC
DP°
BSC
PLUG — Front face shown
Shell Coding AR° BR° CR° DR°
size identification or AP° or BP° or CP° or DP°
letter BSC BSC BSC BSC
N 105 140 215 265
A 102 132 248 320
9 B 80 118 230 312
C 35 140 205 275
D 64 155 234 304
E 91 131 197 240
N 95 141 208 236
11 A 113 156 182 292
13 B 90 145 195 252
and C 53 156 220 255
15 D 119 146 176 298
E 51 141 184 242
N 80 142 196 293
17 A 135 170 200 310
and B 49 169 200 244
19 C 66 140 200 257
D 62 145 180 280
E 79 153 197 272
N 80 142 196 293
21 A 135 170 200 310
23 B 49 169 200 244
and C 66 140 200 257
25 D 62 145 180 280
E 79 153 197 272
Legend: ** Grounded version (metallic insert for use with coaxial or twinax contacts, for receptacle only). For details, please refer to page 19
*** 25-11 and 25-20 arrangements used for interconnection per MIL-STD-1760
Coding - polarization
To avoid cross-plugging problems in applications
requiring the use of more than one MIL-DTL-38999 III
connector of the same size, alternate key-rotations
are available as indicated in the accompanying chart.
As shown in the diagram below, the secondary keys
rotate clockwise from the major one.
In the reference system, the polarizationis shown
by the letters N, A, B, C, D or E.
Arrangements Service Total Number and size of contacts
Class number of
CTV TV contacts 22D 20 16 16G** 12 12 12G** 10 8 8 8 triax 8G**
coax power coax of twinax P S
23-6 23-6 M 6 6
23-6** 23-6** M 6 6X
23-21 23-21 II 21 21
23-21** 23-21 II 21 21 X
23-32 23-32 I 32 32
23-35 23-35 M 100 100
23-53 23-53 I 53 53
23-54 23-54 M 53 40 9 4
23-55 23-55 I 55 55
25-4 25-4 I 56 48 8
25-7 25-7 M 99 97 2
25-8 25-8 M 8 8
25-8** 25-8** M 8 8X
25-11*** 25-11*** N 11 2 9
25-17 25-17 M 42 36 6
25-19 25-19 I 19 19
25-19** 25-19** I 19 19 X
25-20*** 25-20*** N 30 10 13 4* 3
25-24 25-24 I 24 12 12
25-26 25-26 I 25 16 5 4
25-29** 25-29** I 29 29 X
25-29 25-29 I 29 29
25-35 25-35 M 128 128
25-37 25-37 I 37 37
25-41 25-41 I 41 22 3 11 2* 3
25-43 25-43 I 43 23 20
25-46 25-46 I 46 40 4 2
25-61 25-61 I 61 61
Grounded insert
availability
TV CTV - E113/D 20/12/01 16:41 Page 12
11
CTV COMPOSITE SHELLS
TV-CTV
Shell size
BL
MR
1
R
2
STZ1 TT V thread
MIL-DTL-38999 Amphenol Thread Max
±0.25
Max metric
Series III Socapex (inches) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm)
A 9 .6250 13.055 19.685 18.26 15.09 23.83 3.25 5.03 5.49 M12x1-6g
B 11 .7500 13.055 19.685 20.62 18.26 26.19 3.25 5.03 4.93 M15x1-6g
C 13 .8750 13.055 19.685 23.01 20.62 28.58 3.25 5.03 4.93 M18x1-6g
D 15 1.0000 13.055 19.685 24.61 23.01 30.96 3.25 5.03 4.39 M22x1-6g
E 17 1.1875 13.055 19.685 26.97 24.61 33.32 3.25 5.03 4.93 M25x1-6g
F 19 1.2500 13.055 19.685 29.36 26.97 36.53 3.25 5.03 4.93 M28x1-6g
G 21 1.3750 13.843 18.923 31.75 29.36 39.67 3.25 5.79 4.93 M31x1-6g
H 23 1.5000 13.843 18.923 34.93 31.75 42.88 3.91 5.79 6.15 M34x1-6g
J 25 1.6250 13.843 18.923 38.10 34.93 46.02 3.91 5.79 6.15 M37x1-6g
S
2 PLACES
R1
2 PLACES
T
0.13
M
R2
2 PLACES
4 PLACES
TT
23.11 ± 0.13
ML
Z1
B THREAD
CLASS 2A
0.1P-0.3L-TS
V THREAD
METRIC
CTV composite shells
Presentation
Tri-Start CTV series are in accordance with MIL-DTL-38999-III.
The composite used for this series was developed to meet aeronautic market requirements:
•Mass saving (20-40% compared to Aluminium versions / 60-70% compared to stainless steel versions)
•Great corrosion resistance
•Useful life extension
•Great EMI-RFI shielding
CTV Connectors are intermatable and intermountable with TV metallic versions.
Note: Locking rings and hexagonal nuts are delivered without plating (black)
Main characteristics
•Shell to shell conductivity: - Individual value: 3 millivolts
- Value after test: 6 millivolts
•Durability: - 500 cycles with standards contacts
- 1500 cycles with "H” type (M 39029) pin contacts and “J” type (M 39029) socket contacts
•Hydrostatic stability: NASA OUTGASSING SP-R 0022 , § 40
•Ozone exposure: § 3.32 MIL-DTL-38999
•Moisture exposure: MIL-STD-810C, method 508-2
•Standard MIL wiring tools
Overall dimensions - Composite versions
For panel drilling, please refer to page 15
For PCB contacts stickout, please refer to page 16
+0.00
-0.13
+0.20
-0.13
+0.20
-0.13
CTVP00RW JD38999/20J
CTVPS00RF JD38999/20M
Square flange receptacle
TV CTV - E113/D 20/12/01 16:41 Page 13
12
CTV COMPOSITE SHELLS
C
T°
S
H
A°
Shell sizes 9/11 - 22.12
Shell sizes 13/25 - 22.30
2.31 MAX
V THREAD
METRIC
B THREAD
CLASS 2A
0.1P-0.3L-TS
SHELL
SIZE TO 9/11
9.11 MAX
SHELL
SIZE TO 13/25
9.04 MAX
PANEL
THICKNESS
1.57 MIN
3.18 MAX
31.34 MAX
15.01
B THREAD
CLASS 2B
0.1P-0.3L-TS
V THREAD
METRIC
+ 0.08
– 0
9.12 MAX
Q
Shell size ABC
H Hex S T V thread Hex nut
MIL-DTL-38999 Amphenol Thread Max metric max torque N.m
Series III Socapex (mm) (inches) (mm) (mm) (mm) (mm)
A 9 16.99 .6250 30.45 22.23 26.97 17.70 M12x1-6g 4.1
B 11 19.53 .7500 35.20 25.40 31.75 20.88 M15x1-6g 5.3
C 13 24.26 .8750 38.38 30.17 34.92 25.58 M18x1-6g 6.9
D 15 27.53 1.0000 41.55 33.32 38.10 28.80 M22x1-6g 8.6
E 17 30.68 1.1875 44.73 36.52 41.28 31.98 M25x1-6g 9.8
F 19 33.86 1.2500 49.50 39.67 46.02 35.15 M28x1-6g 10.9
G 21 37.06 1.3750 52.65 42.87 49.22 38.28 M31x1-6g 12.7
H 23 40.00 1.5000 55.85 46.02 52.37 41.50 M34x1-6g 13.8
J 25 43.41 1.6250 59.00 50.80 55.57 44.68 M37x1-6g 15
Shell size
B Q V thread
MIL-DTL-38999 Amphenol Thread Max metric
Series III Socapex (inches) (mm) (mm)
A 9 .6250 21.82 M12x1-6g
B 11 .7500 24.99 M15x1-6g
C 13 .8750 29.39 M18x1-6g
D 15 1.0000 32.49 M22x1-6g
E 17 1.1875 35.69 M25x1-6g
F 19 1.2500 38.48 M28x1-6g
G 21 1.3750 41.68 M31x1-6g
H 23 1.5000 44.88 M34x1-6g
J 25 1.6250 47.98 M37x1-6g
CTV06 RW JD38999/26J
CTVS06 RF JD38999/26M
Straight plug
CTV07 RW JD38999/24J
CTVS07 RF JD38999/24M
Jam nut receptacle
For panel drilling, please refer to page 15
For PCB contacts stickout, please refer to page 16
+0.00
-0.025
+0.043
-0.041
+0.028
-0.025
±0.025
-0.000
TV CTV - E113/D 20/12/01 16:41 Page 14
13
TV METALLIC SHELLS
TV-CTV
TV metallic shells
TVS-F / TV-W Aluminium shells
Presentation
Aluminium TV shell connectors are used in professional and international electronic defense programs
in standard environmental conditions.
Main characteristics
•Material shell: Aluminium alloy.
•Shell to shell conductivity: - 1 mΩfor F class
- 2.5 mΩfor W class
•EMI-RFI shielding: - 65 db to 10 Ghz, F class
- 50 db to 10 Ghz, W class
- 85 db to 1 Ghz, F and W class
•Standard MIL wiring tools
TVS-B Marine bronze shells
Presentation
TVS-B bronze shell connectors are not defined in MIL-DTL-38999-III-J standard but they are based
on its requirements.
TVS-B connectors conform to the European standard CECC 75.201.002.
This series was initially selected by the British Navy for a new generation of ships. By extension
a lot of the NATO Navy choose this series as a standard of interconnection.
TVS-B connector is now the most popular circular connector to be used in marine application.
Main characteristics
•Material shell: Nickel aluminium bronze DGS 1043.
•EMI-RFI shielding: > 65 dB at 100 Mhz to 10 Ghz.
•Standard MIL wiring tools
TVS-K / TVS-S Stainless steel shells
Presentation
Stainless steel shell connectors are used in high temperature environments and in harsh vibration
conditions. They provide FIREWALL capabilities.
Main characteristics
•Thermosetting insert
•Working temperature: - 65°C, + 200°C
- 1093°C during 20 minutes
•Shell to shell conductivity: - 10 millivolts for K class
- 1 millivolts for S class
•EMI-RFI shielding: - 45 dB mini at 10 Ghz for K class
- 65 dB mini at 10 Ghz for S class
TV CTV - E113/D 20/12/01 16:41 Page 15
14
TV METALLIC SHELLS
22.99
ML
Z
B
+0.15
0
V THREAD
METRIC
C
T°
S
H
A°
K REF 2,31 MAX
V
B
N MAXPANEL THICKNESS
1,57 MIN, 3,18 MAX
Size 9/11 = 9,45
Size 13/25 = 9,37
Size 9/11 = 22,12
Size 13/25 = 22,30
Shell size ACH Hex STV thread Hex nut
MIL-DTL-38999 Amphenol Max
±0.25
metric max torque
Series III Socapex (mm) (mm) (mm) (mm) (mm) value N.m
A 9 .6250 16.99 30.45 22.23 26.97 17.70 M12x1-6g 4.1
B 11 .7500 19.53 35.20 25.40 31.75 20.88 M15x1-6g 5.3
C 13 .8750 24.26 38.38 30.17 34.93 25.58 M18x1-6g 6.9
D 15 1.0000 27.53 41.55 33.32 38.10 28.80 M22x1-6g 8.6
E 17 1.1875 30.68 44.73 36.52 41.28 31.98 M25x1-6g 9.8
F 19 1.2500 33.86 49.50 39.67 46.02 35.15 M28x1-6g 10.9
G 21 1.3750 37.06 52.65 42.87 49.23 38.28 M31x1-6g 12.7
H 23 1.5000 40.00 55.85 46.02 52.37 41.50 M34x1-6g 13.8
J 25 1.6250 43.41 59.00 50.80 55.58 44.68 M37x1-6g 15
B
Thread
Class 2A
0.1P-0.3L-TS
(inches)
Overall dimensions / Metallic versions
TVP00RW JD38999/20W
TVPS00RF JD38999/20F
TVPS00RB
TVPS00RK JD38999/20K
TVPS00RS JD38999/20S
Square flange receptacle
TV07RW JD38999/24W
TVS07RF JD38999/24F
TVS07RB
TVS07RK JD38999/24K
TVS07RS JD38999/24S
Jam nut receptacle
Shell size
LMR
1
R
2
STZTT V thread
MIL-DTL-38999 Amphenol Max
±0.25
Max metric
Series III Socapex (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm)
A 9 .6250 11.91 20.83 18.26 15.09 23.83 3.25 3.89 5.49 M12x1-6g
B 11 .7500 11.91 20.83 20.62 18.26 26.19 3.25 3.89 4.93 M15x1-6g
C 13 .8750 11.91 20.83 23.01 20.62 28.58 3.25 3.89 4.93 M18x1-6g
D 15 1.0000 11.91 20.83 24.61 23.01 30.96 3.25 3.89 4.39 M22x1-6g
E 17 1.1875 11.91 20.83 26.97 24.61 33.32 3.25 3.89 4.93 M25x1-6g
F 19 1.2500 11.91 20.83 29.36 26.97 36.53 3.25 3.89 4.93 M28x1-6g
G 21 1.3750 12.70 20.07 31.75 29.36 39.67 3.25 4.65 4.93 M31x1-6g
H 23 1.5000 12.70 20.07 34.93 31.75 42.88 3.91 4.65 6.15 M34x1-6g
J 25 1.6250 12.70 20.07 38.10 34.93 46.02 3.91 4.65 6.15 M37x1-6g
+0.00
-0.13
+0.20
-0.13
+0.20
-0.13
B
Thread
Class 2A
0.1P-0.3L-TS
(inches)
+0.00
-0.025
+0.043
-0.041
±0.025
-0.000
For panel drilling, please refer to page 15
For PCB contacts stickout, please refer to page 16
For panel drilling, please refer to page 15
For PCB contacts stickout, please refer to page 16
S
2 PLACES
R1
2 PLACES
T
0.13
M
R2
2 PLACES
4 PLACES
TT
TV CTV - E113/D 20/12/01 16:41 Page 16
15
PANEL DRILLING FOR COMPOSITE AND METALLIC RECEPTACLES
TV-CTV
Q (W88)
Q
31.34 MAX
B
V
9.12 MAX
15.01 + 0.1
– 0.0
Jam nut receptacle
rear panel mounting
Ø E
F
G
V
R3
R4
Ø B
4 Ø W
Square flange receptacle
rear panel mounting
V
R3
R44 Ø W
Square flange receptacle
front panel mounting
Ø D
Shell size
Q V thread Q (W88)*
MIL-DTL-38999 Amphenol Max metric (mm)
Series III Socapex (mm)
A 9 .6250 21.82 M12x1-6g 21.1
B 11 .7500 24.62 M15x1-6g 23.8
C 13 .8750 28.98 M18x1-6g 28.2
D 15 1.0000 32.16 M22x1-6g 31.4
E 17 1.1875 35.33 M25x1-6g 36.5
F 19 1.2500 38.10 M28x1-6g 39.3
G 21 1.3750 41.28 M31x1-6g 42.5
H 23 1.5000 44.45 M34x1-6g 45.3
J 25 1.6250 47.63 M37x1-6g 48.4
B
Thread
Class 2A
0.1P-0.3L-TS
(mm)
Shell size
R
3
R
4
VØ W GØ E FØ B Ø D
MIL-DTL-38999 Amphenol Mini Mini Mini Mini Mini
Series III Socapex (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm)
A 9 18.26 15.09 24.60 3.25 27.80 17.70 16.99 16.66 13.11
B 11 20.62 18.26 27.00 3.25 32.60 20.88 19.53 20.22 15.88
C 13 23.01 20.62 31.50 3.25 36.00 25.58 24.26 23.42 19.05
D 15 24.61 23.01 34.50 3.25 39.60 28.80 27.53 26.59 23.01
E 17 26.97 24.61 28.00 3.25 43.30 31.98 30.68 30.96 25.81
F 19 29.36 26.97 40.50 3.25 47.00 35.16 33.86 32.94 28.98
G 21 31.75 29.36 44.00 3.25 50.60 38.28 37.06 36.12 32.16
H 23 34.93 31.75 47.00 3.81 54.20 41.50 40.01 39.29 34.93
J 25 38.10 34.93 50.00 3.81 59.70 44.68 43.41 42.47 37.69
Panel drilling for composite and metallic receptacles
TV06RW JD38999/26W
TVS06RF JD38999/26F
TVS06RB
TVS06RK JD38999/26K
TVS06RS JD38999/26S
Straight plug
+0
-0.25
+0
-0.25
* Conforms to CECC 75.201.002
TV CTV - E113/D 20/12/01 16:41 Page 17
x
(mm)
Cavity
marking
+ 1.35
+ 3.71
+ 5.89
+ 7.77
+ 9.27
+ 10.31
+ 10.85
+ 10.85
+ 10.31
+ 9.27
+ 7.77
+ 5.89
+ 3.71
+ 1.35
- 1.35
- 3.71
- 5.89
- 7.77
- 9.27
- 10.31
- 10.85
- 10.85
- 10.31
- 9.27
- 7.77
- 5.89
- 3.71
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
y
(mm)
+ 10.82
+ 10.26
+ 9.19
+ 7.67
+ 5.77
+ 3.58
+ 1.22
- 1.22
- 3.58
- 5.77
- 7.67
- 9.19
- 10.26
- 10.82
- 10.82
- 10.26
- 9.19
- 7.67
- 5.77
- 3.58
- 1.22
+ 1.22
+ 3.58
+ 5.77
+ 7.67
+ 9.19
+ 10.26
x
(mm)
Cavity
marking
- 1.35
0
+ 2.49
+ 4.67
+ 6.55
+ 7.90
+ 8.43
+ 8.43
+ 7.90
+ 6.55
+ 4.67
+ 2.49
0
- 2.49
- 4.67
- 6.55
- 7.90
- 8.43
- 8.43
- 7.90
- 6.55
- 4.67
- 2.49
- 1.22
+ 1.22
+ 3.40
+ 5.28
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
y
(mm)
+ 10.82
+ 8.20
+ 8.18
+ 7.11
+ 5.59
+ 3.58
+ 1.22
- 1.22
- 3.58
- 5.59
- 7.11
- 8.18
- 8.84
- 8.18
- 7.11
- 5.59
- 3.58
- 1.22
+ 1.22
+ 3.58
+ 5.59
+ 7.11
+ 8.18
+ 6.12
+ 6.12
+ 5.05
+ 3.53
x
(mm)
Cavity
marking
+ 6.02
+ 6.02
+ 5.28
+ 3.40
+ 1.22
- 1.22
- 3.40
- 5.28
- 6.02
- 6.02
- 5.28
- 3.40
- 1.22
- 1.22
+ 3.18
+ 3.94
+ 3.18
+ 1.22
- 1.22
- 3.18
- 3.94
- 3.18
0
+ 1.22
- 1.22
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
y
(mm)
+ 1.22
- 1.22
- 3.53
- 5.05
- 6.12
- 6.12
- 5.05
- 3.53
- 1.22
+ 1.22
+ 3.53
+ 5.05
+ 3.71
+ 3.71
+ 2.29
0
- 2.29
- 3.71
- 3.71
- 2.29
0
+ 2.29
+ 1.35
- 0.74
- 0.74
16
PRINTED CIRCUIT BOARD DRILLING
Printed circuit board drilling
Receptacles equipped with size 22D contacts
The marking of contact cavities is shown on the mating side view of the male receptacle.
The marking on the female plug is symmetrical in relation to the +X/-Y axis.
x
(mm)
Cavity
marking
+ 1.14
+ 1.98
0
- 1.98
- 1.14
0
1
2
3
4
5
6
y
(mm)
1
2
3
4
56
+Y
+X
–Y
–X
Ø 0.8 mini
6 contacts
size 22D
9-35
+ 1.98
- 1.14
- 2.29
- 1.14
+ 1.98
0
x
(mm)
Cavity
marking
0
+ 2.16
+ 3.51
+ 3.51
+ 2.16
0
- 2.16
- 3.51
- 3.51
- 2.16
0
+ 1.24
- 1.24
+ 3.71
+ 3.00
+ 1.14
- 1.14
- 3.00
- 3.71
- 3.00
- 1.14
+ 1.14
+ 3.00
+ 1.42
- 0.89
- 0.89
1
2
3
4
5
6
7
8
9
10
11
12
13
y
(mm)
Ø 0.8 mini
12
3
4
5
6
7
8
9
10
11
12
13
+Y
+X
–Y
–X
13 contacts
size 22D
11-35
x
(mm)
Cavity
marking
+ 1.14
+ 3.20
+ 4.62
+ 5.16
1
2
3
4
y
(mm)
+ 5.00
+ 4.01
+ 2.24
0
x
(mm)
Cavity
marking
+ 4.62
+ 3.20
+ 1.14
- 1.14
5
6
7
8
y
(mm)
- 2.24
- 4.01
- 5.00
- 5.00
x
(mm)
Cavity
marking
- 3.20
- 4.62
- 5.16
- 4.62
- 3.20
- 1.14
+ 1.14
+ 2.97
+ 2.36
0
- 2.36
- 2.97
- 1.14
0
9
10
11
12
13
14
15
16
17
18
19
20
21
22
y
(mm)
- 4.01
- 2.24
0
+ 2.24
+ 4.01
+ 5.00
+ 2.72
+ 0.66
- 1.91
- 3.05
- 1.91
+ 0.66
+ 2.72
- 0.76
1
22
2
3
4
5
6
7
8
9
10
11
12
13 14
1516
17
18
19
20
21
Ø 0.8 mini
22 contacts
size 22D
+Y
+X
–Y
–X
13-35
x
(mm)
Cavity
marking
+ 1.14
+ 3.12
+ 5.36
+ 6.45
+ 6.76
+ 6.27
+ 5.08
+ 3.30
1
2
3
4
5
6
7
8
y
(mm)
+ 6.65
+ 5.51
+ 4.06
+ 2.03
- 0.25
- 2.49
- 4.45
- 5.89
x
(mm)
Cavity
marking
+ 1.14
- 1.14
- 3.30
- 5.08
- 6.27
- 6.76
- 6.45
- 5.36
9
10
11
12
13
14
15
16
y
(mm)
- 6.65
- 6.65
- 5.89
- 4.45
- 2.49
- 0.25
+ 2.03
+ 4.06
x
(mm)
Cavity
marking
- 3.12
- 1.14
+ 1.14
+ 3.12
+ 4.32
+ 4.32
+ 3.12
+ 1.14
- 1.14
- 3.12
- 4.32
- 4.32
- 3.12
- 1.14
+ 1.14
+ 2.29
+ 1.14
- 1.14
- 2.29
- 1.14
0
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
y
(mm)
+ 5.51
+ 6.65
+ 4.35
+ 3.02
+ 1.02
- 1.27
- 3.23
- 4.37
- 4.37
- 3.23
- 1.27
+ 1.02
+ 3.02
+ 4.37
+ 1.88
- 0.10
- 2.08
- 2.08
- 0.10
+ 1.88
- 0.10
1
2
3
+Y
+X
–Y
–X
Ø 0.8 mini
4
5
6
7
8
9
10
11
12
13
14
15
16
17 18
19 20
22
23
2425
26
27
29
30
28
36 31
32
3334
35 37 21
15-35
37 contacts
size 22D
x
(mm)
Cavity
marking
- 7.92
- 7.92
- 7.92
- 6.15
- 5.94
- 5.94
- 5.94
- 5.94
- 5.94
- 4.37
- 3.96
- 3.96
- 3.96
- 3.96
1
2
3
4
5
6
7
8
9
10
11
12
13
14
y
(mm)
+ 2.18
- 0.10
- 2.39
+ 5.61
+ 3.33
+ 1.04
- 1.24
- 3.53
- 5.82
+ 7.09
+ 4.47
+ 2.18
- 0.10
- 2.39
x
(mm)
Cavity
marking
- 3.96
- 3.96
- 2.26
- 1.98
- 1.98
- 1.98
- 1.98
- 1.98
- 1.98
- 1.98
0
0
0
0
15
16
17
18
19
20
21
22
23
24
25
26
27
28
y
(mm)
- 4.67
- 6.96
+ 8.03
+ 5.61
+ 3.33
+ 1.04
- 1.24
- 3.53
- 5.82
- 8.10
+ 8.36
+ 4.47
+ 2.18
- 0.10
x
(mm)
Cavity
marking
0
0
0
+ 2.26
+ 1.98
+ 1.98
+ 1.98
+ 1.98
+ 1.98
+ 1.98
+ 1.98
+ 4.37
+ 3.96
+ 3.96
+ 3.96
+ 3.96
+ 3.96
+ 3.96
+ 6.15
+ 5.94
+ 5.94
+ 5.94
+ 5.94
+ 5.94
+ 7.92
+ 7.92
+ 7.92
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
y
(mm)
- 2.39
- 4.67
- 6.96
+ 8.03
+ 5.61
+ 3.33
+ 1.04
- 1.24
- 3.53
- 5.82
- 8.10
+ 7.09
+ 4.47
+ 2.18
- 0.10
- 2.39
- 4.67
- 6.96
+ 5.61
+ 3.33
+ 1.04
- 1.24
- 3.53
- 5.82
+ 2.18
- 0.10
- 2.39
1
3
4
9
10
16
17
24 31
25 32 40
47
53
55
52
46
39
Ø 0.8 mini
+Y
+X
–Y
–X
55 contacts
size 22D
3
5
6
7
8
11
12
13
14
15
18
19
20
21
22
23
26
27
28
29
30
54
48
49
50
51
41
42
43
44
45
33
34
35
36
37
38
17-35
x
(mm)
Cavity
marking
- 9.07
- 9.07
- 9.07
- 7.09
- 7.09
- 7.09
- 7.09
- 7.09
- 7.09
- 5.11
- 5.11
- 5.11
- 5.11
- 5.11
- 5.11
- 5.11
- 3.12
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
y
(mm)
+ 2.29
0
- 2.29
+ 5.72
+ 3.43
+ 1.14
- 1.14
- 3.43
- 5.72
+ 6.86
+ 4.57
+ 2.29
0
- 2.29
- 4.57
- 6.86
+ 8.00
x
(mm)
Cavity
marking
- 3.12
- 3.12
- 3.12
- 3.12
- 3.12
- 3.12
- 3.12
- 1.14
- 1.14
- 1.14
- 1.14
- 1.14
- 1.14
- 1.14
- 1.14
- 1.14
+ 1.14
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
y
(mm)
+ 5.72
+ 3.43
+ 1.14
- 1.14
- 3.43
- 5.72
- 8.00
+ 9.14
+ 6.86
+ 4.57
+ 2.29
0
- 2.29
- 4.57
- 6.86
- 9.14
+ 9.14
x
(mm)
Cavity
marking
+ 1.14
+ 1.14
+ 1.14
+ 1.14
+ 1.14
+ 1.14
+ 1.14
+ 1.14
+ 3.12
+ 3.12
+ 3.12
+ 3.12
+ 3.12
+ 3.12
+ 3.12
+ 3.12
+ 5.11
+ 5.11
+ 5.11
+ 5.11
+ 5.11
+ 5.11
+ 5.11
+ 7.09
+ 7.09
+ 7.09
+ 7.09
+ 7.09
+ 7.09
+ 9.07
+ 9.07
+ 9.07
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
y
(mm)
+ 6.86
+ 4.57
+ 2.29
0
- 2.29
- 4.57
- 6.86
- 9.14
+ 8.00
+ 5.72
+ 3.43
+ 1.14
- 1.14
- 3.43
- 5.72
- 8.00
- 6.86
+ 4.57
+ 2.29
0
- 2.29
- 4.57
- 6.86
+ 5.72
+ 3.43
+ 1.14
- 1.14
- 3.43
- 5.72
+ 2.29
0
- 2.29
1
2
3
9
4
10 17 25
16
24 33
34
42
43
50
51
57 63
58
64
66
65
Ø 0.8 mini
+Y
+X
–Y
–X
66 contacts
size 22D
5
6
7
8
11
12
13
14
15
18
19
20
21
22
23
26
27
28
29
30
31
32
35
36
34
38
39
40
41
44
45
46
47
48
49
52
53
54
55
56
59
60
61
62
19-35
Ø 0.8 mini
+Y
+X
–Y
–X
79 contacts
size 22D
21 71
11
51
77
1234
5
6
7
8
9
10
12
13
1415
16
17
18
19
20
22
23
24
25 26 27
29 30 31
32
28
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48 49 50
52 53
54
55
56
57
58
59
60
61
62
63
64
65
66
67 6869
70
73
74
75
76
7879
72
21-35
x
(mm)
Cavity
marking
- 10.87
- 11.86
- 12.40
- 10.54
- 12.40
- 10.87
- 10.87
- 8.43
- 8.43
- 8.43
- 8.43
- 8.43
- 8.43
- 8.43
- 8.43
- 6.32
- 6.32
- 6.32
- 6.32
- 6.32
- 6.32
- 6.32
- 6.32
- 6.32
- 4.22
- 4.22
- 4.22
- 4.22
- 4.22
- 4.22
- 4.22
- 4.22
- 4.22
- 4.22
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
y
(mm)
+ 6.12
+ 3.91
+ 1.55
0
- 1.55
- 3.61
- 6.02
+ 8.46
+ 6.05
+ 3.63
+ 1.22
- 1.19
- 3.61
- 6.02
- 8.43
+ 9.65
+ 7.24
+ 4.83
+ 2.41
0
- 2.41
- 4.83
- 7.24
- 9.65
+ 10.87
+ 8.46
+ 6.05
+ 3.63
+ 1.22
- 1.19
- 3.61
- 6.02
- 8.43
- 10.85
x
(mm)
Cavity
marking
- 2.11
- 2.11
- 2.11
- 2.11
- 2.11
- 2.11
- 2.11
- 2.11
- 2.11
- 2.11
- 2.11
0
0
0
0
0
0
0
0
0
0
+ 2.11
+ 2.11
+ 2.11
+ 2.11
+ 2.11
+ 2.11
+ 2.11
+ 2.11
+ 2.11
+ 2.11
+ 2.11
+ 4.22
+ 4.22
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
y
(mm)
+ 12.07
+ 9.65
+ 7.24
+ 4.83
+ 2.41
0
- 2.41
- 4.83
- 7.24
- 9.65
- 12.07
+ 10.87
+ 8.46
+ 6.05
+ 3.63
+ 1.22
- 1.19
- 3.61
- 6.02
- 8.43
- 10.85
+ 12.07
+ 9.65
+ 7.24
+ 4.83
+ 2.41
0
- 2.41
- 4.83
- 7.24
- 9.65
- 12.07
+ 10.87
+ 8.46
x
(mm)
Cavity
marking
+ 4.22
+ 4.22
+ 4.22
+ 4.22
+ 4.22
+ 4.22
+ 4.22
+ 4.22
+ 6.32
+ 6.32
+ 6.32
+ 6.32
+ 6.32
+ 6.32
+ 6.32
+ 6.32
+ 6.32
+ 8.43
+ 8.43
+ 8.43
+ 8.43
+ 8.43
+ 8.43
+ 8.43
+ 8.43
+ 10.87
+ 11.86
+ 12.40
+ 10.54
+ 12.40
+ 10.87
+ 10.87
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
y
(mm)
+ 6.05
+ 3.63
+ 1.22
- 1.19
- 3.61
- 6.02
- 8.43
- 10.85
+ 9.65
+ 7.24
+ 4.83
+ 2.41
0
- 2.41
- 4.83
- 7.24
- 9.65
- 8.46
+ 6.05
+ 3.63
+ 1.22
- 1.19
- 3.61
- 6.02
- 8.43
+ 6.12
+ 3.91
+ 1.55
0
- 1.55
- 3.61
- 6.02
Ø 0.8 mini
+Y
+X
–Y
–X
100 contacts
size 22D
1
2
3
4
5
6
7
816 2535 46 56 67 77 86
94
95
96
97
98
99
100
93
85
76
55 66
44
34
24
15
9
10
11
12
13
14
17
18
19
20
21
22
23
26
27
28
29
30
31
32
36
37
38
39
40
41
42
35
33
45
47
48
49
50
51
52
53
54
57
58
59
60
61
62
63
64
68
69
71
70
72
73
74
75
78
79
80
81
82
83
84
87
88
89
90
91
92
23-35
TV CTV - E113/D 20/12/01 16:41 Page 18
17
PRINTED CIRCUIT BOARD DRILLING
TV-CTV
128 contacts
size 22D
25-35
x
(mm)
Cavity
marking
- 2.17
- 13.21
- 13.87
- 14.10
- 13.87
- 13.21
- 12.17
- 10.77
- 10.54
- 10.54
- 10.54
- 10.54
- 10.54
- 10.77
- 8.43
- 8.43
- 8.43
- 8.43
- 8.43
- 8.43
- 8.43
- 8.43
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
y
(mm)
+ 7.09
+ 4.83
+ 2.41
0
- 2.41
- 4.83
- 7.09
+ 9.07
+ 4.83
+ 2.41
0
- 2.41
- 4.83
- 9.07
+ 11.28
+ 8.43
+ 6.02
+ 3.61
+ 1.19
- 1.19
- 3.61
- 6.02
x
(mm)
Cavity
marking
- 8.43
- 8.43
- 6.32
- 6.32
- 6.32
- 6.32
- 6.32
- 6.32
- 6.32
- 6.32
- 6.32
- 6.32
- 6.32
- 4.06
- 4.22
- 4.22
- 4.22
- 4.22
- 4.22
- 4.22
- 4.22
- 4.22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
y
(mm)
- 8.43
- 10.85
+ 12.60
+ 9.65
+ 7.24
+ 4.83
+ 2.41
0
- 2.41
- 4.83
- 7.24
- 9.65
- 12.07
+ 13.49
+ 10.85
+ 8.43
+ 6.02
+ 3.61
+ 1.19
- 1.19
- 3.61
- 6.02
x
(mm)
Cavity
marking
- 4.22
- 4.22
- 4.22
- 2.11
- 2.11
- 2.11
- 2.11
- 2.11
- 2.11
- 2.11
- 2.11
- 2.11
- 2.11
- 2.11
0
0
0
0
0
0
0
0
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
y
(mm)
- 8.43
- 10.85
- 13.26
+12.07
+ 9.65
+ 7.24
+ 4.83
+ 2.41
0
- 2.41
- 4.83
- 7.24
- 9.65
- 12.07
+ 13.26
+ 10.85
+ 8.43
+ 6.02
+ 3.61
+ 1.19
- 1.19
- 3.61
x
(mm)
Cavity
marking
0
0
0
0
+ 2.11
+ 2.11
+ 2.11
+ 2.11
+ 2.11
+ 2.11
+ 2.11
+ 2.11
+ 2.11
+ 2.11
+ 2.11
+ 4.06
+ 4.22
+ 4.22
+ 4.22
+ 4.22
+ 4.22
+ 4.22
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
y
(mm)
- 6.02
- 8.43
- 0.85
- 14.10
+ 12.70
+ 9.65
+ 7.24
+ 4.83
+ 2.41
0
- 2.41
- 4.83
- 7.24
- 9.65
- 12.07
+ 13.49
+ 10.85
+ 8.43
+ 6.02
+ 3.61
+ 1.19
- 1.19
x
(mm)
Cavity
marking
+ 4.22
+ 4.22
+ 4.22
+ 4.22
+ 4.22
+ 6.32
+ 6.32
+ 6.32
+ 6.32
+ 6.32
+ 6.32
+ 6.32
+ 6.32
+ 6.32
+ 6.32
+ 6.32
+ 8.43
+ 8.43
+ 8.43
+ 8.43
+ 8.43
+ 8.43
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
y
(mm)
- 3.61
- 6.02
- 8.43
- 10.85
- 13.26
+12.60
+ 9.65
+ 7.24
+ 4.83
+ 2.41
0
- 2.41
- 4.83
- 7.24
- 9.65
-12.07
+11.28
+ 8.43
+ 6.02
+ 3.61
+ 1.19
- 1.19
x
(mm)
Cavity
marking
+ 8.43
+ 8.43
+ 8.43
+ 8.43
+ 10.77
+ 10.54
+ 10.54
+ 10.54
+ 10.54
+ 10.54
+ 10.77
+ 12.07
+ 13.21
+ 13.87
+ 14.10
+ 13.87
+ 13.21
+ 12.17
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
y
(mm)
- 3.61
- 6.02
- 8.43
- 10.85
+ 9.07
+ 4.83
+ 2.41
0
- 2.41
- 4.83
- 9.07
+ 7.09
+ 4.83
+ 2.41
0
- 2.41
- 4.83
- 7.09
Ø 0.8 mini
128 contacts
size 22D
1
4
7
8
14
15
24
25
35
36
47
48 59
70
71
81
82
93
94
104
105
114
115
121
122
125
128
2
3
5
6
9
13
12
11
10
16
17
18
19
20
21
22
23
26
27
28
29
30
31
32
33
34
37
38
39
40
41
42
43
44
45
46
49
50
51
52
53
54
55
56
57
58
60
61
62
63
64
65
66
67
68
69
72
73
74
75
76
77
78
79
80
83
84
85
86
87
88
89
90
91
92
95
96
97
98
99
100
101
102
103
106
107
108
109
110
111
112
113
116
117
118
119
120
123
124
127
126
+Y
+X
–Y
–X
x
(mm)
Cavity
marking
+ 1.65
0
- 1.65
A
B
C
y
(mm)
+ 0.97
- 1.91
+ 0.97
+Y
+X
–Y
–X
Ø 1 mini
3 contacts
size 20
A
C
B
9-98
x
(mm)
Cavity
marking
0
+ 3.30
+ 1.65
- 1.65
- 3.30
0
A
B
C
D
E
F
y
(mm)
+ 3.30
0
- 2.87
- 2.87
0
0
Ø 1 mini
+Y
+X
–Y
–X
6 contacts
size 20
A
D
B
C
EF
11-98
x
(mm)
Cavity
marking
0
+ 3.30
A
B
y
(mm)
+ 5.72
+ 5.72
x
(mm)
Cavity
marking
+ 4.95
+ 6.60
C
D
y
(mm)
+ 2.87
0
x
(mm)
Cavity
marking
+ 4.95
+ 3.30
0
- 3.30
- 4.95
- 6.60
- 4.95
- 3.30
- 1.65
+ 1.65
+ 3.30
+ 1.65
- 1.65
- 3.30
0
E
F
G
H
J
K
L
M
N
P
R
S
T
U
V
y
(mm)
- 2.87
- 5.72
- 5.72
- 5.72
- 2.87
0
+ 2.87
+ 5.72
+ 2.87
+ 2.87
0
- 2.87
- 2.87
0
0
+Y
+X
–Y
–X
Ø 1 mini
19 contacts
size 20
A
B
C
D
E
F
G
H
J
K
L
M
NP
R
S
T
UV
15-19
x
(mm)
Cavity
marking
0
+ 3.33
+ 6.07
+ 7.75
A
B
C
D
y
(mm)
+ 8.15
+ 7.44
+ 5.44
+ 2.51
x
(mm)
Repère
contact
+ 8.10
+ 7.06
+ 4.80
+ 1.70
E
F
G
H
y
(mm)
- 0.86
- 4.09
- 6.60
- 7.98
x
(mm)
Cavity
marking
- 1.70
- 4.80
- 7.06
- 8.10
- 7.75
- 6.07
- 3.33
- 1.78
+ 1.78
+ 4.45
+ 4.52
+ 3.02
0
- 3.02
- 4.52
- 4.45
0
0
J
K
L
M
N
P
R
S
T
U
V
W
X
Y
Z
a
b
c
y
(mm)
- 7.98
- 6.60
- 4.09
- 0.86
+ 2.51
+ 5.44
+ 7.44
+ 4.50
+ 4.50
+ 2.39
- 0.91
- 3.84
+ 5.16
- 3.84
- 0.91
+ 2.39
+ 1.65
- 1.65
Ø 1 mini
+Y
+X
–Y
–X
26 contacts
size 20
AB
C
D
E
F
G
H
J
K
L
M
N
P
T
U
V
W
X
Y
Z
aS
b
c
R
17-26
x
(mm)
Cavity
marking
0
+ 3.18
+ 4.90
+ 4.17
0
- 4.17
- 4.90
- 3.18
+ 1.65
- 1.65
A
B
C
D
E
F
G
H
J
K
y
(mm)
+ 4.95
+ 3.81
+ 0.76
- 2.67
- 3.43
- 2.67
+ 0.76
+ 3.81
- 0.38
- 0.38
Ø 1 mini
10 contacts
size 20
+Y
+X
–Y
–X
AB
C
D
E
F
G
H
J
K
13-98
Receptacles equipped with size 20 contacts
The marking of contact cavities is shown on the mating side view of the male receptacle.
The marking on the female plug is symmetrical in relation to the +X/-Y axis.
TV CTV - E113/D 20/12/01 16:41 Page 19
18
PRINTED CIRCUIT BOARD DRILLING
x
(mm)
Cavity
marking
+ 1.68
+ 4.80
+ 7.26
+ 8.76
+ 9.07
A
B
C
D
E
y
(mm)
+ 8.97
+ 7.75
+ 5.51
+ 2.49
- 0.84
x
(mm)
Cavity
marking
+ 8.15
+ 6.15
+ 3.30
0
- 3.30
F
G
H
J
K
y
(mm)
- 4.06
- 6.73
- 8.51
- 9.12
- 8.51
x
(mm)
Cavity
marking
- 6.15
- 8.15
- 9.07
- 8.76
- 7.26
- 4.80
- 1.68
0
+ 3.15
+ 5.31
+ 5.79
+ 4.42
+ 1.65
- 1.65
- 4.42
- 5.79
- 5.31
- 3.15
0
+ 2.44
0
- 2.44
L
M
N
P
R
S
T
U
V
W
X
Y
Z
a
b
c
d
e
f
g
h
j
y
(mm)
- 6.73
- 4.06
- 0.84
+ 2.49
+ 5.51
+ 7.75
+ 8.97
+ 5.84
+ 4.90
+ 2.41
- 0.84
- 3.84
- 5.61
- 5.61
- 3.84
- 0.84
+ 2.41
+ 4.90
+ 2.44
0
- 2.44
0
Ø 1 mini
+Y
+X
–Y
–X
32 contacts
size 22D
A
B
C
D
E
F
G
H
J
K
L
M
N
P
R
ST
U
V
W
X
Y
Z
a
b
c
d
e
j
f
h
g
19-32
x
(mm)
Cavity
marking
+ 6.23
+ 3.28
0
- 3.28
- 6.23
- 8.58
- 10.09
- 10.60
J
K
L
M
N
P
R
S
y
(mm)
- 8.58
- 10.09
- 10.60
- 10.09
- 8.58
- 6.23
- 3.28
0
x
(mm)
Cavity
marking
- 10.09
- 8.58
- 6.23
- 3.28
0
+ 3.35
+ 5.92
+ 7.15
+ 6.73
+ 4.78
+ 1.73
- 1.73
- 4.78
- 6.73
- 7.15
- 5.92
- 3.35
0
+ 2.98
+ 3.71
- 1.66
+ 1.66
- 3.71
- 2.98
0
T
U
V
W
X
Y
Z
a
b
c
d
e
f
g
h
i
j
k
m
n
p
q
r
s
t
y
(mm)
+ 3.28
+ 6.23
+ 8.58
+10.09
+ 7.20
+ 6.38
+ 4.09
+ 0.87
- 2.55
- 5.39
- 6.99
- 6.99
- 5.39
- 2.55
+ 0.87
+ 4.09
+ 6.38
+ 3.81
+ 2.38
- 0.85
- 3.43
- 3.43
- 0.85
+ 2.38
0
x
(mm)
Cavity
marking
0
+ 3.28
+ 6.23
+ 8.58
+ 10.09
+ 10.60
+ 10.09
+ 8.58
A
B
C
D
E
F
G
H
y
(mm)
+ 10.60
+ 10.09
+ 8.58
+ 6.23
+ 3.28
0
- 3.28
- 6.23
Ø 1 mini
+Y
+X
–Y
–X
41 contacts
size 20
AB
C
D
E
F
G
H
J
K
L
M
N
P
R
S
T
U
VW
X
Y
Z
a
b
c
d
e
f
g
h
i
j
k
m
n
p
q
r
s
t
21-41
TV 07
&
CTV 07 TVP 00 CTVP 00
09 to 11 13 to 25
10.13 9.95
15.03 14.85
9.93 9.75
14.83 14.65
L1
P
S
L2
L1
L2
min
max
min
max
min
max
min
max
09 to 19 21 to 25 09 à 19 21 to 25
11.55 12.31
16.45 17.21
11.35 12.11
16.25 17.01
12.71 13.47
11.07 10.89 12.39 13.15 13.52 14.28
16.17 15.99 17.49 18.25 18.62 19.38
10.87 10.69 12.19 12.95 13.32 14.08
15.97 15.79 17.29 18.05 18.42 19.18
17.61 18.37
12.51 13.27
17.41 18.17
53 contacts
size 20
23-53
x
(mm)
Cavity
marking
+ 2.84
+ 5.72
+ 8.53
+ 11.43
+ 11.43
+ 11.43
+ 8.53
+ 5.72
- 5.72
- 8.53
- 11.43
- 11.43
- 11.43
- 8.53
- 5.72
- 2.84
0
+ 2.84
A
B
C
D
E
F
G
H
J
K
L
M
N
P
R
S
T
U
y
(mm)
+ 11.56
+ 9.91
+ 8.26
+ 3.30
0
- 3.30
- 8.26
- 10.41
- 10.41
- 8.26
- 3.30
0
+ 3.30
+ 8.26
+ 9.91
+ 11.56
+ 9.91
+ 8.26
x
(mm)
Cavity
marking
+ 5.72
+ 8.53
+ 8.53
+ 8.53
+ 8.53
+ 5.72
+ 2.84
0
- 2.84
+ 5.72
+ 8.53
+ 8.53
+ 8.53
+ 8.53
- 5.72
- 2.84
0
+ 2.84
V
W
X
Y
Z
a
b
c
d
e
f
g
h
k
m
n
p
q
y
(mm)
+ 6.60
+ 4.95
+ 1.65
- 1.65
- 4.95
- 6.60
- 8.26
- 9.91
- 8.26
- 6.60
- 4.95
- 1.65
+ 1.65
+ 4.95
+ 6.60
+ 8.26
+ 6.60
+ 4.95
Ø 1 mini
+Y
+X
–Y
–X
AB
C
D
E
F
G
H
c
J
K
L
M
N
P
RST
UV
W
p
qr
X
BB
CC s
Y
HH
DD tZ
EE u
a
v
b
mn
k
zAA
hyGG
gxFF
few
d
x
(mm)
Cavity
marking
+ 5.72
+ 5.72
+ 5.72
+ 2.84
0
- 2.84
- 5.72
- 5.72
- 5.72
- 2.84
0
+ 2.84
+ 2.84
0
- 2.84
- 2.84
0
r
s
t
u
v
w
x
y
z
AA
BB
CC
DD
EE
FF
GG
HH
y
(mm)
+ 3.30
0
- 3.30
- 4.95
- 6.60
- 4.95
- 3.30
0
+ 3.30
+ 4.95
+ 3.30
+ 1.65
- 1.65
- 3.30
- 1.65
+ 1.65
0
61 contacts
size 20
25-61
x
(mm)
Cavity
marking
+ 4.98
+ 7.98
+ 10.49
+ 12.32
+ 13.39
+ 13.61
+ 12.98
+ 11.53
+ 9.35
+ 6.58
+ 3.40
0
- 3.40
- 6.58
- 9.35
- 11.53
- 12.98
- 13.61
- 13.39
- 12.32
- 10.49
A
B
C
D
E
F
G
H
J
K
L
M
N
P
R
S
T
U
V
W
X
y
(mm)
+ 12.70
+ 11.05
+ 8.71
+ 5.84
+ 2.57
- 0.76
- 4.17
- 7.29
- 9.93
- 11.94
- 13.18
- 13.64
- 13.18
- 11.94
- 9.93
- 7.29
- 4.17
- 0.76
+ 2.57
+ 5.84
+ 8.71
x
(mm)
Cavity
marking
- 7.98
- 4.98
- 1.73
+ 1.73
+ 4.39
+ 7.24
+ 9.19
+ 10.13
+ 9.96
+ 8.66
+ 6.38
+ 3.38
0
- 3.38
- 6.38
- 8.65
- 9.96
- 10.13
- 9.19
- 7.24
Y
Z
a
b
c
d
e
f
g
h
i
j
k
m
n
p
q
r
s
t
u
y
(mm)
+ 11.05
+ 12.70
+ 11.53
+ 11.53
+ 9.22
+ 7.19
+ 4.45
+ 1.17
- 2.24
- 5.41
- 7.98
- 9.63
- 10.21
- 9.63
- 7.98
- 5.41
- 2.24
+ 1.17
+ 4.45
+ 7.19
+ 9.22
Ø 1 mini
+Y
+X
–Y
–X
A
B
C
D
E
F
G
H
J
K
L
M
N
P
R
S
T
U
V
W
X
YZab
c
d
e
f
g
h
I
J
m
n
p
q
r
s
t
uv
w
x
y
z
AA
BB
CC
DD
EE
FF
GG HH
JJ
KK
LL
MM
NN
PP
k
x
(mm)
Cavity
marking
0
+ 3.73
+ 6.02
+ 6.78
+ 5.79
+ 3.33
0
- 3.33
- 5.79
- 6.78
- 6.02
- 3.73
0
+ 2.67
+ 3.43
0
- 3.43
- 2.67
0
v
w
x
y
z
AA
BB
CC
DD
EE
FF
GG
HH
JJ
KK
LL
MM
NN
PP
y
(mm)
+ 8.59
+ 8.66
+ 3.10
- 0.25
- 3.53
- 5.92
- 6.78
- 5.92
- 3.53
- 0.25
+ 3.10
+ 5.66
+ 5.08
+ 2.39
- 1.04
- 3.35
- 1.04
+ 2.39
0
Please consult us for other insert arrangements.
Please refer to data sheet E114 for other PCB-tail versions.
Standard PCB - tail dimensions
at the rear of receptacles
(in mm)
L2
L1
07
L2
L1
P00
TV CTV - E113/D 20/12/01 16:41 Page 20
19
DATA BUS “GROUND PLANE” RECEPTACLES
TV-CTV
Data bus “ground plane” receptacle
Presentation
With Data Bus “Groud Plane” receptacles the electrical link between the outer shielding of coaxial or
twinax contacts and the shell of the connector is realized, avoiding any cabling operation between the
cable braid and the shell.
Main characteristics
•Composite shells (for TV metallic shells, please consult us)
•Olive drab cadmium or electroless nickel plating
•Mate with standard CTV (or TV) plugs
•Connect the BUS per STANAG 3910 20 Mbits and STANAG 3838 1 Mbits
•Contact resistance < 10 mΩ(Test report BCO 9-8523-1 available)
Insert arrangements
MIL insert arrangement reference
TV-CTV insert arrangement reference
Service class
1
2
3
Number of contacts
Contact sizes
4
5
Contact size 16 G
Grounded
12 G
Grounded
8 G
Grounded
Caption
Front face view of male insert
The major keyway is shown in the «normal» position
9-05
1
8G
(TV only)
1
2
3
4
5
1
2
3
4
5
1
2
3
4
5
11-2
I
2
16G
AB
13-4
I
4
16G
A
B
C
D
15-5
5
16G
A
B
C
D
E
17-6
I
6
12G
A
B
C
D
E
F
17-8
II
8
16G
A
B
C
D
E
F
G
H
17-22
2 2
12G 8G
A
B
C
D
21-16
16
16G
A
B
C
D
E
F
G
H
J
K
L
M
N
P
R
S
21-75
4
8G
A
B
C
D
23-6
M
6
8G
A
B
C
F
D
E
25-8
8
8G
A
B
C
D
E
F
G
H
25-19
I
19
12G
A
B
C
D
E
F
G
H
J
K
L
M
NP
R
S
T
UV
A
B
C
D
E
F
G
H
J
K
L
M
N
P
R
S
b
a
Z
YX
W
V
U
T
df
e
c
25-29
29
16G
23-21
21
16G
A
B
C
D
E
F
G
H
J
K
L
M
N
P
R
S
T
U
V
W
X
For insert availability, please refer to pages 9-10.
For panel drilling, please refer to page 15.
TV CTV - E113/D 20/12/01 16:41 Page 21
20
TVS-Y / TVS-YN HERMETIC RECEPTACLES
S
R1
R2
T
S
R1
R2
2.36+0.15
0
B
6.35 MAX V
R3
R4
Ø Y
4 Ø W
Panel drilling
0.13
M
TT
0.13
M
23.19+0.28
0
Shell size
R
1
R
2
STTTØ W R
3
R
4
VØ Y
MIL-DTL-38999 Amphenol
±0.25
Mini Mini
Series III Socapex (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm)
A 9 .6250 18.26 15.09 23.83 3.25 5.49 3.25 18.26 15.09 24.60 16.66
B 11 .7500 20.62 18.26 26.19 3.25 4.93 3.25 20.62 18.26 27.00 20.22
C 13 .8750 23.01 20.62 28.58 3.25 4.93 3.25 23.01 20.62 31.50 23.42
D 15 1.0000 24.61 23.01 30.96 3.25 4.39 3.25 24.61 23.01 34.50 26.59
E 17 1.1875 26.97 24.61 33.32 3.25 4.93 3.25 26.97 24.61 28.00 30.96
F 19 1.2500 29.36 26.97 36.53 3.25 4.93 3.25 29.36 26.97 40.50 32.94
G 21 1.3750 31.75 29.36 39.67 3.25 4.93 3.25 31.75 29.36 44.00 36.12
H 23 1.5000 34.93 31.75 42.88 3.91 6.15 3.81 34.93 31.75 47.00 39.29
J 25 1.6250 38.10 34.93 46.02 3.91 6.15 3.81 38.10 34.93 50.00 42.47
B
Thread
Class 2A
0.1P-0.3L-TS
(inches)
TVS-Y / TVS-YN hermetic receptacles
Presentation
Hermetic receptacles TVS-Y and TVS-YN are used in applications which require the maintenance of pressure
in the shell or box and in equipments imposing reduce bulk at the rear of connectors.
Main characteristics
•9 shell sizes (stainless steel)
•Solder pin contacts in nickel alloy
•Contact plating in active zone: Gold
•Glass insert
•Air leakage < 1.10 -7 cm3/s under 1 bar of pressure differential
•Passivation or nickel plating
Overall dimensions - Hermetic versions
TVPS02Y JD38999/21Y
TVPS02YN JD38999/21N
Square flange receptacle
+0.20
-0.13
+0.20
-0.13
+0
-0.25
TV CTV - E113/D 20/12/01 16:41 Page 22
21
TVS-Y / TVS-YN HERMETIC RECEPTACLES
TV-CTV
C
S
H
Ø KK
K REF 5.08 MAX
B
1.57 MINI
3.18 MAX
L
Panel drilling
Ø Y
Z
V
L
0.79+0.15
–0.13
B
9.53 MAX
M
Ø KK
Ø GG
V
Panel drilling
Ø Y
V
Shell size
CH/plats LØ KK BVØ Y ZHex nut
MIL-DTL-38999 Amphenol Maxi Maxi
±0.25
Mini Mini max torque
Series III Socapex (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) value N.m
A 9 .6250 30.45 22.23 9.07 16.31 26.97 27.80 17.70 16.99 4.1
B 11 .7500 35.20 25.40 9.07 19.46 31.75 32.60 20.88 19.53 5.3
C 13 .8750 38.38 30.18 9.07 22.66 34.93 36.00 25.58 24.26 6.9
D 15 1.0000 41.55 33.32 9.07 25.86 38.10 39.60 28.80 27.53 8.6
E 17 1.1875 44.73 36.53 9.07 29.01 41.28 43.30 31.98 30.68 9.8
F 19 1.2500 49.50 39.67 9.68 32.21 46.02 47.00 35.16 33.86 10.9
G 21 1.3750 52.65 42.80 9.68 35.36 49.23 50.60 38.28 37.06 12.7
H 23 1.5000 65.85 46.02 9.68 38.56 52.37 54.20 41.50 40.01 13.8
J 25 1.6250 59.00 50.80 9.68 41.71 55.58 59.70 44.68 43.41 15
B
Thread
Class 2A
0.1P-0.3L-TS
(inches)
Shell size Ø GG Ø KK L M VØ Y
MIL-DTL-38999 Amphenol Mini Mini
Series III Socapex (mm) (mm) (mm) (mm) (mm) (mm)
A 9 .6250 19.05 17.07 20.47 3.18 24.60 17.60
B 11 .7500 21.44 19.84 20.47 3.18 27.00 20.40
C 13 .8750 24.61 23.01 20.47 3.18 31.50 23.50
D 15 1.0000 27.79 26.19 20.47 3.18 24.50 26.70
E 17 1.1875 30.94 29.36 20.47 3.18 38.00 29.90
F 19 1.2500 33.32 31.75 20.47 3.18 40.50 32.30
G 21 1.3750 36.53 34.93 20.47 3.18 44.00 35.50
H 23 1.5000 39.70 38.10 21.29 3.96 47.00 38.60
J 25 1.6250 42.88 41.28 21.29 3.96 50.00 41.80
B
Thread
Class 2A
0.1P-0.3L-TS
(inches)
TVS07Y JD38999/23Y
TVS07YN JD38999/23N
Jam nut receptacle
TVSIY JD38999/25Y
TVSIYN JD38999/25N
Solder mounting receptacle
+0.043
-0.41
+0.28
0+0
-0.25
+0.28
-0.25
+0.03
-0.13
+0.28
-0
+0.15
-0.13
TV CTV - E113/D 20/12/01 16:41 Page 23
22
LANYARD RELEASE PLUGS
58.5 MAX
51 MAX
3.2 MAX
6.3 RAD
42.4 MAX
LENGTH "X"
See chart A
7.11 MAX
Ø42.5 MAX
ACCESSORY
Length “X”mm
MIL.STD 1760 coding
D 140
E 153
F 166
G 178
H 191
J 407
K 229
M 254
X 432
Lanyard release plugs
Presentation
Lanyard release plugs meet the requirements of the standard MIL-DTL-38999 III standard,
as well as the specific MIL-STD-1760 version that also meets MIL-STD-1760 and STANAG 3837 AA.
2 insert arrangements are available in MIL-STD-1760 lanyard release plugs, in accordance with the definition
of BUS 1553 B standards in N coding (arrangement 25-20) and in A coding (arrangement 25-11) -
Refer to pages 7 to 8 - insert arrangements marked with***
Other shell sizes and insert arrangements are also available in the MIL-DTL-38999 standard version.
Please refer to pages 6 to 8 and consult us for further information.
Main characteristics
•Lanyard release plugs mate with standard TV receptacles, JD38999/20 and /24 types
•They accept MIL-C-85049 accessories
•They are 100% scoop-proof
•Applications: - Quick disconnect
- Weapon systems
- Ejector seats
Overall dimensions
Lanyard release plugs - MIL-STD-1760
Low profile version (ordering information on page 30)
TVFBRW JD38999/31W
Lanyard release plugs - MIL-STD-1760
CHART A
Other lengths are also available under TVFBRW proprietary designation.
Consult us.
TV CTV - E113/D 20/12/01 16:41 Page 24
23
LANYARD RELEASE PLUGS
TV-CTV
Blue band
9.12 Max
9.50 Max
45.24 Max
60.33 Max
Length X
See chart II
Ø 12.70 ± 0.79
D
Metric
V Thread
B
Arrangement Insert
code arrangement
04 11-4
06 11-35
07 11-98
10 13-4
11 13-8
13 13-98
14 13-35
18 15-5
19 15-19
20 15-35
27 17-6
28 17-8
29 17-26
30 17-35
31 17-99
37 19-11
38 19-28
39 19-32
40 19-35
47 21-11
48 21-16
49 21-35
50 21-41
51 21-39
57 23-21
58 23-35
59 23-53
66 25-19
67 25-29
68 25-35
69 25-43
70 25-61
71 25-4
72 25-24
Length “X”Code
(mm) MS/Amphenol
102 A
115 B
127 C
140 D
153 E
166 F
178 G
191 H
203 I
216 J
229 K
242 L
254 M
267 N
280 P
293 R
305 S
318 T
331 U
356 V
381 W
407 X
432 Y
458 Z
Shell size
metric B D
MIL-DTL-38999 Amphenol V thread Max Max
Series III (mm) (mm)
B 11 M15x1.0-6g 46.89 28.17
C 13 M18x1.0-6g 50.09 31.75
D 15 M22x1.0-6g 52.81 34.93
E 17 M25x1.0-6g 56.01 38.10
F 19 M28x1.0-6g 58.45 41.28
G 21 M31x1.0-6g 62.79 44.45
H 23 M34x1.0-6g 65.89 47.63
J 25 M37x1.0-6g 68.71 50.08
Lanyard release plugs
Standard version
(ordering information page 31)
885565...P JD38999/29W
915565...P JD38999/29F
885565...S JD38999/30W
915565...S JD38999/30F
CHART I
CHART III
CHART II
TV CTV - E113/D 20/12/01 16:41 Page 25
24
ACCESSORIES
Corresponding connector shell size:
09/11/13/15/17/19/21/23/25
Finish
B: Bronze
F: Electroless nickel plated, aluminium version
W: Olive drab cadmium plated, aluminium version
Connector type
Wire type
N: Nylon cord
Blank: Metallic chain
Protection cap type
EC: For square flange receptacle
ER: For jam nut receptacle
F: For plug
CAP Series B
For composite or stainless steel caps, please consult us
EC N TV W 15
Protection caps
20.24 MAX
B
A
29.62 MAX
N
A
4.1 +0.1
4.1 +0.1
Protection cap for
receptacles equipped
with metallic chain
or nylon cord
(for shell types: P00,07)
Protection cap for
plugs equipped
with metallic chain
or nylon cord
(for shell type: 06)
Termination of the chain
or cord for jam nut
receptacle protection caps
(for shell type: 07)
Termination of the cord
for square flange
receptacle protection caps
(for shell type: P00)
Termination of the chain
for square flange
receptacle and plug
protection caps
(for shell types: P00,06)
Termination of the cord
for plugs protection caps
(for shell type: 06)
Cord length for plugs: 160 mm
Cord length for receptacles: 105 mm
Chain length for plugs: 127 mm
Chain length for receptacles: 152 mm
Shell size B N
Dia Dia
MIL-DTL-38999 Amphenol Max Max
Series III Socapex (mm) (mm)
A 9 .6250 22.23 22.73
B 11 .7500 25.40 25.40
C 13 .8750 28.58 29.74
D 15 1.0000 31.75 32.99
E 17 1.1875 36.53 36.47
F 19 1.2500 38.10 39.19
G 21 1.3750 41.28 42.42
H 23 1.5000 44.45 45.39
J 25 1.6250 47.63 48.62
A Thread
0.1P-0.3L-TS
Class 2B
(inches)
Ordering information
TV CTV - E113/D 20/12/01 16:41 Page 26
Holding support equipped with olive drab cadmium dummy
receptacles
Amphenol Socapex
reference: 809 931
Size 25 receptacle
all codings Size 23 receptacle
all codings Size 21 receptacle
all codings Size 19 receptacle
all codings Size 17 receptacle
all codings
Size 15 receptacle
all codings Size 13 receptacle
all codings Size 11 receptacle
all codings Size 9 receptacle
A, B, D codings Size 9 receptacle
N, C, E codings
25
ACCESSORIES
TV-CTV
Standard crimp and PCB contacts
Sealing plugs
Plastic dust caps
For protection during transport and storage,
plastic dust caps are available upon request.
For metallic accessories on
metallic shells only.
For composite, please consult us.
8 (Coax) 900024 NA
8 (Power) 900029 NA
10 (Power) 10.576225 NA
12 900023 MS27488-12
16 900020 MS27488-16
20 900021 MS27488-20
22D 900022 MS27488-22
Contact
Size Proprietary No Military No
Above part numbers include standard 500 – cycle finish designation – gold plating over suitable underplate
in accordance with MIL-C-39029.
* For use with RG180B/U and RG195A/U cable. For other size 8, 12 and 16 coaxial contacts please refer to
data sheet E114.
** For arrangement 21-48 only
For other contacts (coaxial, triaxial, optical termini, PCB, thermocouple), please refer to data sheet E114
For details regarding size 8 piggy back grommets range, please refer to data sheet E114
Version Pin contacts Socket contacts
Contact Size Proprietary No Military No Proprietary No Military No
8 (coax)* 900130 M39029/60-367 900140 M39029/59-366
8 (power) 900197 - 900217 -
900198-91**
10 (power) 900006 - 900046 -
Standard 12 (coax) 900340 M39029/28-211 900350 M39029/75-416
12 900005 M39029/58-365 900045 M39029/56-353
16 (coax) 900132 M39029/76-424 900142 M39029/77-428
16 900000 M39029/58-364 900040 M39029/56-352
20 900001 M39029/58-363 900041 M39029/56-351
22D 900004 M39029/58-360 900044 M39029/56-348
12 900238-91 - - -
PCB 16 900240-91 - 900263 -
20 900241 - 900251 -
22 900245-91 - 900256 -
Torque value for rear accessories
9 11.30 19 22.60
11 11.30 21 28.30
13 17.00 23 28.30
15 22.60 25 28.30
17 22.60
Shell Size Max. torque value N.m Shell Size Max. torque value N.m
TV CTV - E113/D 20/12/01 16:41 Page 27
26
TOOLING
Crimping tools
Insertion and removal tools
Plastic tools
Metallic tools
Insertion tools Removal tools
Proprietary No Military No Proprietary No Military No
8 power ** --
10 power - M81969/14-05 - M81969/14-05
12 809 859 M81969/14-04 809 859 M81969/14-04
16 809 855 M81969/14-03 809 855 M81969/14-03
20 809 854 M81969/14-10 809 854 M81969/14-10
22D 809 856 M81969/14-01 809 856 M81969/14-01
Contact
Size
Contact Contact part number Crimping tool Positioner
size Proprietary No Military No Proprietary No Military No Proprietary No Military No
8 coax Inner pin & socket 809 801 M22520/2-01 - M22520/2-31
Outer pin & socket 809 914 M22520/5-01 809 915 M22520/5-41
8 power 900 198/91 - 809 872 - 809 873 -
900 197 - 809 872 - 809 873 -
900 217 - 809 872 - 809 873 -
10 power 900 006 -
900 046 -
12 coax Inner pin & socket 809 801 M22520/2-01 809 932 M22520/2-34
Outer pin & socket 809 926 M22520/31-01 809 927 M22520/31-02
12 900 005 M39029/58-365 809 857 M22520/1-01 809 858 M22520/1-04
900 045 M39029/56-353 809 857 M22520/1-01 809 858 M22520/1-04
16 coax Inner pin & socket 809 801 M22520/2-01 809 862 M22520/2-35
Outer pin & socket 809 863 M22520/4-01 809 864 M22520/4-02
16 900 000 M39029/58-364 809 857 M22520/1-01 809 858 M22520/1-04
900 040 M39029/56-352 809 857 M22520/1-01 809 858 M22520/1-04
900 001 M39029/58-363 809 857 M22520/1-01 809 858 M22520/1-04
20 809 801 M22520/2-01 809 826 M22520/2-10
900 041 M39029/56-351 809 857 M22520/1-01 809 858 M22520/1-04
809 801 M22520/2-01 809 826 M22520/2-10
22D 900 004 M39029/58-360 809 801 M22520/2-01 809 810 M22520/2-09
900 044 M39029/56-348 809 801 M22520/2-01 809 835 M22520/2-07
Straight type Angle type
Insertion tools Removal tools Insertion tools Removal tools
Proprietary No Proprietary No Proprietary No Military No Proprietary No Military No
8 power/coax *809 961 **
809 845 -
10 power - - - M81969/8-11 - M81969/8-12
12 - - 809 838 M81969/8-09 809 839 M81969/8-10
16 809 816 809 846 809 812 M81969/8-07 809 820 M81969/8-08
20 809 817 809 847 809 813 M81969/8-05 809 821 M81969/8-06
22D 809 819 809 849 809 815 M81969/8-01 809 823 M81969/8-02
Contact
size
* Manual insertion
* Manual insertion
Note: For lanyard release plugs, only use straight removal tools.
TV CTV - E113/D 20/12/01 16:41 Page 28
Deviation
F404: Tinned PCB contacts
W88 (for TVS06 RB only): Coupling nut conforms to CECC75 - 201 - 002A
For other deviations (FXXX), please consult us.
Contacts
Blank: Connector delivered with contacts
LC: Connector delivered without contacts
Polarization
Blank for normal or A, B, C, D, E. See coding system on page 10
Contact type
P: Pin (500 cycles)
S: Socket (500 cycles)
H: Pin (1500 cycles - CTV only)
J: Socket (1500 cycles - CTV only)
Contact arrangement
See pages 6 to 8
Shell size
09/11/13/15/17/19/21/23/25
27
ORDERING INFORMATION
TV-CTV
Shell material, finish and contact type
Composite See pages 11 and 12
RW: Olive drab cadmium plated 175°C, crimp contacts
WCI: Olive drab cadmium plated 175°C, PCB contacts
WDW: Olive drab cadmium plated 175°C, wire-wrap contacts*
RF: Electroless nickel plated 200°C, crimp contacts
FCI: Electroless nickel plated 200°C, PCB contacts
FDW: Electroless nickel plated 200°C , wire-wrap contacts*
Aluminium See pages 13 to 15
RW: Olive drab cadmium plated 175°C, crimp contacts
WCI: Olive drab cadmium plated 175°C, PCB contacts
WDW: Olive drab cadmium plated 175°C, wire-wrap contacts*
RF: Electroless nickel plated 200°C, crimp contacts
FCI: Electroless nickel plated 200°C, PCB contacts
FDW: Electroless nickel plated 200°C, wire-wrap contacts*
Stainless steel See pages 13 to 15
RK: Passivated 200°C, firewall capability, crimp contacts
KCI: Passivated 200°C, firewall capability, PCB contacts
KDW: Passivated 200°C, firewall capability, wire-wrap contacts*
RS: Nickel plated 200°C, firewall capability, crimp contacts
SCI: Nickel plated 200°C, firewall capability, PCB contacts
SDW: Nickel plated 200°C firewall capability, wire-wrap contacts*
Bronze See pages 13 to 15
RB: 200°C, crimp contacts
BCI: 200°C, PCB contacts
BDW: 200°C, wire-wrap contacts*
Shell type
Square flange receptacle: 175°C (O.D. cadmium): P00 200°C (nickel): PS00
Jam nut receptacle: 175°C (O.D. cadmium): 07 200°C (nickel): S07
Straight plug: 175°C (O.D. cadmium): 06 200°C (nickel): S06
Series TV
TV: Metallic shell
CTV: Composite shell
* For information on wire wrap contacts, please refer to data sheet E114.
Amphenol designation - Composite and metallic versions
PS00 RF 23 53 P A - -
TV CTV - E113/D 20/12/01 16:41 Page 29
28
ORDERING INFORMATION
Polarization:
N for normal or A, B, C, D, E. See coding system on page 10
Military designation - Composite and metallic versions
Contact and connector type
A: Without pin contact
B: Without socket contact
P: With pin contacts
S: With socket contacts
Contact arrangement
See pages 6 to 8
Shell size
ABCDE FGH J MIL
09 11 13 15 17 19 21 23 25 Amphenol
Shell material and finish
Composite
J: Olive drab cadmium plated 175°C
M: Electroless nickel plated 200°C
Aluminium
W: Olive drab cadmium plated 175°C
F: Electroless nickel plated 200°C
Stainless steel
K: Passivated 200°C, firewall capability
S: Nickel plated 200°C, firewall capability
Shell type
20: Square flange receptacle
24: Jam nut receptacle
26: Straight plug
Series JD38999/ 20 F H 53 P A
Contacts
LC: Connector delivered without contact.
Polarization
Blank for normal or A,B. See coding system on page 10
Contact type
P: Pin
S: Socket
Contact arrangement
See page 19
Shell size*
09/11/13/15/17/21/23/25
Shell finish
W: Olive drab cadmium plated 175°C
F: Electroless nickel plated 200°C
Insert type
RG: conductive insert
Shell type
Square flange receptacle: 175°C (O.D. cadmium): P 00 200°C (nickel): PS00
Jam nut receptacle: 175°C (O.D. cadmium): 07 200°C (nickel): S07
Series CTV
CTV: Composite shell
(for TV metallic shell, please consult us)
For other arrangement, shell, coding or deviation, please consult us
* Shell size 9, available in aluminium (TV version) only.
Amphenol designation - Data bus “Ground Plane” receptacle
P 00 RG W 15 05 P - LC
TV CTV - E113/D 20/12/01 16:41 Page 30
29
ORDERING INFORMATION
TV-CTV
Polarization
Blank for normal or A, B, C, D, E. See coding system on page 10.
Contact type
P: Pin
Contact arrangement
See pages 6 to 8 (insert arrangements marked with “Y”)
Shell size:
09/11/13/15/17/19/21/23/25
Shell material and finish
Y: Stainless steel passivated
YN: Stainless steel nickel plated
Shell type
PS02: Square flange receptacle
S07: Jam nut receptacle
SI: Solder mounting receptacle
Series TV
Amphenol designation - Hermetic versions
SI YN 11 35 P -
Military designation - Hermetic versions
Polarization:
N for normal or A, B, C, D, E. See coding system on page 10
Contact type
P: Pin.
Contact arrangement
See pages 6 to 8 (insert arrangements marked with “Y”)
Shell size
ABCDEFGH JMIL
09 11 13 15 17 19 21 23 25 Amphenol
Shell material and finish
Y: Stainless steel passivated
N: Stainless steel nickel plated
Shell type
21: Square flange receptacle
23: Jam nut receptacle
25: Solder mounting receptacle
Connector type JD38999/ 25 N B 35 P N
TV CTV - E113/D 20/12/01 16:41 Page 31
Lanyard length
D: 140 mm
E: 153 mm
F: 166 mm
G: 178 mm
H: 191 mm
K: 229 mm
M: 254 mm
J: 407 mm
X: 432 mm
Other lengths are available upon request
30
ORDERING INFORMATION
Contact type and polarization
G: 25-11 arrangement, pin contacts only (see “polarization chart” on page 31)
P: 25-20 arrangement, pin contacts only (see “polarization chart” on page 31)
Arrangement
25-11, 25-20: see pages 6 to 8
RW: Olive drab cadmium plated
FB: MIL-STD-1760 lanyard release plug
Series TV
Amphenol designation - MIL-STD-1760 lanyard release plugs
Low profile version
FB RW 25-11 PE
Military designation - MIL-STD-1760 lanyard release plugs
Low profile version
Plug locking ring type
1: Ø 51mm (low profile)
2: Ø 68mm (please consult us)
Polarization:
N for 25-20 arrangement. See coding on page 10
A for 25-11 arrangement.
Contact arrangement
11: 25-11 arrangement
20: 25-20 arrangement
Lanyard length
D: 140 mm
E: 153 mm
F: 166 mm
G: 178 mm
H: 191 mm
K: 229 mm
M: 254 mm
J: 407 mm
X: 432 mm
Shell finish
W: Olive drab cadmium plated 175°C
Shell and contact type
31: Plug with pin contacts, per MIL-STD-1760
Series JD38999/ 31 W E 11 N 1
TV CTV - E113/D 20/12/01 16:41 Page 32
31
ORDERING INFORMATION
TV-CTV
Contact type and polarization
See chart below
Lanyard length
A to Z code (see chart III on page 23)
Shell size and arrangement code
See chart I on page 23
Others, please consult us
Connector type
Shell finish 88
88: Olive-drab cadmium plated
91: Nickel plated
Amphenol designation - Lanyard release plugs
Standard version
5565 20 K P
Military designation - Lanyard release plugs
Standard version
Polarization
N for normal or A, B, C, D, E. See coding on page 10
Lanyard length
A to Z code (see chart III on page 23)
Contact arrangement
See chart I on page 23
Shell size
A* B C D E F G H J MIL
09* 11 13 15 17 19 21 23 25 Amphenol
* Please consult us
Shell finish
W: Olive drab cadmium plated
F: Nickel plated
Shell and contact type
29: Plug with pin contacts
30: Plug with socket contacts
Connector type JD38999/ 29 W D 35 E N
MS Socket contact MS Pin contact
code code Amphenol code code Amphenol
SN S (normal) PN P (normal)
SA H PA G
SB J PB I
SC L PC K
SD N PD M
SE T PE R
Polarization
TV CTV - E113/D 20/12/01 16:41 Page 33
CROSS REFERENCES
E113/C
CAPTION MIL-DTL-38999 Series III P/N AMPHENOLP/N
Shell size X ■■ ■■
Insert arrangement XX ##
Polarization, rotation of secondary keyways ° ^
As example, male version without contact (except for bronze and hermetic male versions with contacts).
SHELL MATERIAL MIL-DTL-38999 Series III AMPHENOL
JD38999/20J X XX A ° CTVP00RW ■■ ■■## P ^ LC
CTVP00WCI ■■ ■■## P ^ LC
CTVP00WDW ■■ ■■## P ^ LC
JD38999/20M X XX A ° CTVPS00RF ■■ ■■## P ^ LC
CTVPS00FCI ■■ ■■## P ^ LC
CTVPS00FDW ■■ ■■## P ^ LC
Composite shell JD38999/24J X XX A ° CTV07RW ■■ ■■## P ^ LC
CTV07WCI ■■ ■■## P ^ LC
CTV07WDW ■■ ■■## P ^ LC
JD38999/24M X XX A ° CTVS07RF ■■ ■■## P ^ LC
CTVS07FCI ■■ ■■## P ^ LC
CTVS07FDW ■■ ■■## P ^ LC
JD38999/26J X XX A ° CTV06RW ■■ ■■## P ^ LC
JD38999/26M X XX A ° CTVS06RF ■■ ■■## P ^ LC
JD38999/20W X XX A ° TVP00RW ■■ ■■## P ^ LC
TVP00WCI ■■ ■■## P ^ LC
TVP00WDW ■■ ■■## P ^ LC
JD38999/20F X XX A ° TVPS00RF ■■ ■■## P ^ LC
TVPS00FCI ■■ ■■## P ^ LC
TVPS00FDW ■■ ■■## P ^ LC
Aluminium shell JD38999/24W X XX A ° TV07RW ■■ ■■## P ^ LC
TV07WCI ■■ ■■## P ^ LC
TV07WDW ■■ ■■## P ^ LC
JD38999/24F X XX A ° TVS07RF ■■ ■■## P ^ LC
TVS07FCI ■■ ■■## P ^ LC
TVS07FDW ■■ ■■## P ^ LC
JD38999/26W X XX A ° TV06RW ■■ ■■## P ^ LC
JD38999/26F X XX A ° TVS06RF ■■ ■■## P ^ LC
JD38999/20K X XX A ° TVPS00RK ■■ ■■## P ^ LC
TVPS00KCI ■■ ■■## P ^ LC
TVPS00KDW ■■ ■■## P ^ LC
JD38999/20S X XX A ° TVPS00RS ■■ ■■## P ^ LC
TVPS00SCI ■■ ■■## P ^ LC
TVPS00SDW ■■ ■■## P ^ LC
Stainless steel shell JD38999/24K X XX A ° TVS07RK ■■ ■■## P ^ LC
TVS07KCI ■■ ■■## P ^ LC
TVS07KDW ■■ ■■## P ^ LC
JD38999/24S X XX A ° TVS07RS ■■ ■■## P ^ LC
TVS07SCI ■■ ■■## P ^ LC
TVS07SDW ■■ ■■## P ^ LC
JD38999/26K X XX A ° TVS06RK ■■ ■■## P ^ LC
JD38999/26S X XX A ° TVS06RS ■■ ■■## P ^ LC
TVPS00RB ■■ ■■## P ^
TVPS00BCI ■■ ■■## P ^
Aluminium bronze shell TVPS00BDW ■■ ■■## P ^
TVS07RB ■■ ■■## P ^
TVS07BCI ■■ ■■## P ^
TVS07BDW ■■ ■■## P ^
JD38999/21Y X XX P ° TVPS02Y ■■ ■■## P ^
JD38999/21N X XX P ° TVPS02YN ■■ ■■## P ^
Hermetic receptacles JD38999/23Y X XX P ° TVS07Y ■■ ■■## P ^
JD38999/23N X XX P ° TVS07YN ■■ ■■## P ^
JD38999/25Y X XX P ° TVSIY ■■ ■■## P ^
JD38999/25N X XX P ° TVSIYN ■■ ■■## P ^
Do not hesitate to contact us for further information
Amphenol Socapex
Mil/Aero & Industrial Business Unit
948, Promenade de l’Arve - BP 29
F - 74311 Thyez Cedex
Tel.: +33 (0)4 50 89 28 00 - Fax: +33 (0)4 50 96 19 41
http://www.amphenol-socapex.com
Sales office in Paris
Tel.: +33 (0)1 49 05 30 00 - Fax: +33 (0)1 49 05 30 43
Amphenol
32
The information given in this document is as a guideline only. We reserve the right to modify our products in any way we deem necessary. Any duplication is prohibited, unless approved in writing.
Médiasquare +33 (0) 1 46 31 36 36
TV CTV - E113/D 20/12/01 16:41 Page 2