TV CTV - E113/D 20/12/01 16:41 Page 3 Tri-Start TV-CTV TM Main features * Shell material - Composite - Aluminium - Marine bronze - Stainless steel l heno ED Amp O R V L APP QP * Finish - Olive drab cadmium plating - Nickel plating - Passivation (for steel versions) DESCRIPTION GENERAL CHARACTERISTICS MIL-DTL-38999 III subminiature cylindrical connectors * The composite connector is a lightweight (17 to 70 % weight savings), corrosion resistant ( withstanding 2000 hours of salt spray exposure) connector * 9 shell sizes from 09 to 25 * Contacts - More than 60 arrangements of contacts, including high density versions - Size 8, 10, 12, 16, 20, 22 D contacts - Signal, power, twinax, coaxial contacts, MOV, optical termini * The nickel aluminium bronze connector offers a high corrosion resistance and robustness for marine applications * The stainless steel connector provides a firewall capability * Contact protection - 100% scoop-proof shell - Interfacial seal ensures sealing around each contact and prevents electrolytic erosion The Amphenol TV connectors range also offers the following specific versions: * EMI/RFI protection - Shell to shell bottoming - Grounding fingers on the plug shell * Ground Plane version with a conductive insert for specific use with coaxial or triaxial contacts * Quick coupling completely mates and self locks in a 360 turn of the coupling nut * Receptacles with reinforced sealing * Hermetic version in Y and N classes * Performs sine and random vibration tests by an anti-decoupling device * Filtered versions using tubular or planar technology (please consult us) * Receptacles are intermountable with MIL-DTL-38999 series I standard (same panel drilling) * Contacts (please refer to data sheet E114) * Tooling (please refer to data sheet E119) * Rear accessories (please refer to data sheet E121) * FTV filtered connectors (French version only) TV-CTV Amphenol Socapex offers a global solution: besides the TV-CTV wide range of connectors, the following products are available (please consult data sheets): High performance threaded cylindrical connectors APPLICATIONS Additional information E113/C The TV-CTV connectors are in accordance with MIL-DTL-38999 series III standard. These connectors offer the highest performance capabilities for both general duty and severe environment applications. Besides the most commonly used aluminium shell, different shell materials are available: * Military and aeronautic applications: battlefields, ground vehicles, aircrafts * Advanced industrial applications: high vibration requirements, high density TV-CTV TV CTV - E113/D 20/12/01 16:41 Page 4 TABLE OF CONTENTS GENERAL CHARACTERISTICS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 TECHNICAL CHARACTERISTICS * Mechanical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 * Environmental characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 * Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 * Insert arrangements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 * Coding - Polarization . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 CTV COMPOSITE SHELLS * Presentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 * Overall dimensions . . . . . . . . . . . . . Square flange receptacle . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Jam nut receptacle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Straight plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 TV METALLIC SHELLS * Aluminium shells presentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 * Bronze shells presentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 * Stainless steel shells presentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 * Overall dimensions . . . . . . . . . . . . . Square flange receptacle . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Jam nut receptacle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Straight plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 PANEL DRILLING FOR COMPOSITE AND METALLIC RECEPTACLES . . . . . . . . . . . . . . . . . . . . . . 15 PRINTED CIRCUIT BOARD DRILLING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 DATA BUS "GROUND PLANE" RECEPTACLES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 TVS-Y/TVS-YN HERMETIC RECEPTACLES * Presentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 * Overall dimensions . . . . . . . . . . . . . Square flange receptacle . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Jam nut receptacle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Solder mounting receptacle . . . . . . . . . . . . . . . . . . . . . . . . 21 LANYARD RELEASE PLUGS * Presentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 * Overall dimensions . . . . . . . . . . . . . Lanyard release plug - MIL-STD-1760 . . . . . . . . . . . . . . . . 22 Lanyard release plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 ACCESSORIES * Protection caps. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 * Plastic dust caps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 * Standard contacts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 * Sealing plugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 * Holding support with dummy receptacles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 * Torque value for rear accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 TOOLING * Crimping tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 * Insertion and removal tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 CONNECTORS ORDERING INFORMATION * Composite and metallic versions . . . Amphenol designation (TV/CTV) . . . . . . . . . . . . . . . . . . . . 27 Military designation (JD38999) . . . . . . . . . . . . . . . . . . . . . 28 * Data bus "ground plane" receptacles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 * Hermetic versions . . . . . . . . . . . . . . Amphenol designation (TV) . . . . . . . . . . . . . . . . . . . . . . . . 29 Military designation (JD38999) . . . . . . . . . . . . . . . . . . . . . 29 * MIL-STD-1760 Lanyard release plugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 * Lanyard release plugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 * Cross references (Amphenol and military designations) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 2 20/12/01 16:41 Page 5 1 8 5 13 9 9 7 12 7 14 10 4 11 6 2 1 2 3 4 5 6 7 Locking ring Quick coupling thread Ratchet Anti decoupling device Plug shell Spring fingers (EMI) Grommet 8 9 10 11 12 13 14 TECHNICAL CHARACTERISTICS TV CTV - E113/D Receptacle shell Contact retention clips Crimping pin contact Crimping socket contact Interfacial seal Socket insert Pin insert Mechanical characteristics * Thermoplastic insert * Silicone rubber back insert and interfacial seal * Durability: - 500 cycles - 1500 cycles with composite connector " CTV " fitted with " H " and " J " contact types * Shocks: half sine wave of 300 G magnitude during 3ms per MIL - STD - 0901 * Sine vibrations: - 60 g from - 55C to + 175C (olive drab cadmium finish) - 60 g from - 55C to 200C (nickel finish and firewall version) * Random vibrations: - 1 G2 / Hz at 175C olive drab cadmium finish - 1G2 / Hz at 200C nickel finish and firewall version - 5G2 / Hz at ambient * Bending moment Shell size Series III Amphenol MIL-DTL-38999 09 11 13 15 17 19 21 23 25 11.3 33.9 45.2 56.5 67.8 79.1 90.4 101.7 113.0 TV-CTV A B C D E F G H J Bending moment * Contact retention force 3 Contact size 22D 20 16 12 10 8 Maximum load (N) 45 67 110 110 150 150 TECHNICAL CHARACTERISTICS TV CTV - E113/D 20/12/01 16:41 Page 6 Environmental characteristics * Salt spray exposure and working temperature: * Waterproof shells Shell material Shell finish Salt spray exposure per MIL. STD 1344/1009 Class norm Amphenol Working temperature mini maxi Composite Electroless Nickel O.D cadmium 2000 H 2000 H M J CTV-RF CTV-RW -65C -65C +200C +175C Aluminium Electroless Nickel O.D cadmium 48 H 500 H F W TVS-RF TV-RW -65C -65C +200C +175C Stainless steel Nickel -- 48 H 500 H S K TVS-RS TVS-RK -65C -65C +200C +200C Bronze -- 1000 H TVS-RB -65C +200C Shell finish Salt spray exposure per MIL. STD 1344/1009 Class norm 48 H 500 H N Y * Hermetic shells Shell material Stainless steel Nickel -- Amphenol TVS-YN TVS-Y Working temperature mini maxi -65C -65C +200C +200C * Humidity: per MIL-DTL-38999: 3.29 * Altitude immersion: according to MIL-DTL-38999 III standard (exept hermetics) * Air leakage < 1.10 - 7 cm3/s under 1 bar of pressure differential (hermetics only) * Fluid resistance (per MIL-DTL-38999), 3.33: * MIL-L-7808 (lubricating oil) * MIL-L-23699 (lubricating oil) * MIL-H-5606 (hydraulic fluid) * Hydraulic fluid (Chevron M2V) * MIL-A-8243 (defrosting fluid) * MIL-C-87936 type I * MIL-T-5624 (JP5) * MIL-C-47220 or Coolanol 25 or equivalent * MIL-G-3056 type I (gasoline) * Isopropyl alcohol per TT-I-735 grade A or B mixed with mineral spirit TT-T-291 type I or P-D-680 type I 4 20/12/01 16:41 Page 7 TECHNICAL CHARACTERISTICS TV CTV - E113/D Electrical characteristics * Contact rating: nominal current per contact Contact size 22D 20 16 12 10 8 Crimp (A) 5 7.5 13 23 33 60 Hermetic (A) 3 5 10 17 -- -- Contact size 22D 20 16 12 10 8 Contact resistance (m) 8 4.7 2 1.1 0.6 0.6 * Contact resistance * Insulation resistance Insulation resistance (500 V) Crimp Hermetic Ambient temperature 105 M 5 x 103 M Maximum temperature 103 M 5 x 102 M * Service rating Dielectric withstanding voltage (Vrms) At sea level mated 15000 meters 21000 meters 34000 meters Working voltage unmated mated unmated mated unmated mated unmated Vrms Vdc 800 550 800 350 800 200 400 550 200 300 450 M 1300 1300 N 1000 1000 I 1800 1800 1000 600 1000 400 1000 200 600 850 II 2300 2300 1000 800 1000 500 1000 200 900 1250 400 260 * Dimensions of acceptable contacts and cables Contact Contact Size Diameter Diameter Depth Gauge AWG mm mm mm Section mm2 0.76 0.88+/-0.03 3.58 22D 5 Crimp barrel 20 1 1.19+/-0.03 5.30 16 1.57 1.70+/-0.03 5.30 12 2.36 2.54+/-0.06 5.30 10 3.17 3.48+/-0.06 9 8 3.60 4.6+0.05/-0 10 Power Acceptable cables Outside diameter (mm) 22 24 26 28 0.38 0.22 0.15 0.095 20 22 24 0.60 0.38 0.22 16 18 20 1.34 0.93 0.60 12 14 3.30 1.94 10 12 5 3 8 8.98 Max acceptable: 10mm2 Min Average Max 0.76 1.20 1.37 1.02 1.83 2.11 1.68 2.41 2.77 2.46 3.20 3.61 2.97 3.88 4.5 5.8 TV-CTV Service INSERT ARRANGEMENTS TV CTV - E113/D 20/12/01 16:41 Page 8 Insert arrangements Front face view of male insert The major keyway is shown in the normal position Contact size 22D 20 12 16 10 8 Caption 1 2 3 MIL insert arrangement reference TV-CTV insert arrangement reference Service class Y B 1 4 6 1 10 11-01 11-12 1 8 Twinax 1 12 E 3 12 B D A B D G B 35 11-35 M 13 22D B 98 11-98 I 6 20 C4 13-4 I 4 16 F C8 13-8 I 8 20 C 35 13-35 M 22 22D A L A M K B R J D C K C J T D P E C P D G K L A 17 C 4 5 A 6 D D F E C C E6 17-6 I 6 12 17-2 M 1 8 Twinax E8 17-8 II 8 16 15 14 D 5 7 10 C 8 B C 9 S N a M 11 R P A D 13 12 6 D 16 A 1 2 B 4 H F F 3 B E 30 11 38 22D Y G B D 97 15-97 I 8 4 20 16 1 2 3 A E B M G D 35 15-35 M 37 22D Y 1 H D F D 19 15-19 I 19 20 Y J R E H E F 1 31 C S T E B P V U J C Y A N K D 18 15-18 I 18 20 D 15 15-15 I 14 1 20 16 D 05 15-5 M 5 16 L B R G F M A N M U S H H G 4 5 L B N J C 98 13-98 I 10 20 Y E K D D Y 1 2 3 G C E 11-99 I 7 20 B A 22 B C C H A H F 5 6 Y 1 G E C Y A F B F D 4 B5 11-5 I 5 20 B2 11-2 I 2 16 Y A 2 11 7 4 5 B C Y 13 1 2 3 A E A D A 98 9-98 I 3 20 9-94 I 2 20 Y 9 B C B A 35 9-35 M 6 22D 8 A A A 2 3 4 5 Number of contacts Contact sizes Y 5 1 2 3 4 5 Z L 2 12 Coax 2 8 Twinax C U D V W Y X K 17-22 B T c J 17-20 M 4 16 22D 12 A b H E F G E 26 17-26 I 26 20 Y Y J 10 4 17 32 40 25 P 47 1 53 A N B 16 1 2 3 4 5 24 31 39 46 E 35 17-35 M 55 22D 52 2 8 Twinax B K C U D G W H F F G E 99 17-99 I 21 2 20 16 C E V X K J 17-75 T Z A H B L L 55 9 A S Y M 3 R E F 11 19-11 II 11 16 D 6 TV CTV - E113/D 20/12/01 16:41 Page 9 INSERT ARRANGEMENTS Insert arrangements Front face view of male insert The major keyway is shown in the normal position Contact size 22D 20 12 16 10 8 Caption MIL insert arrangement reference TV-CTV insert arrangement reference Service class 1 2 3 Number of contacts Contact sizes 4 5 Y A M N L T N P b Z M D R a G E F D X E g D B h g W Y Z X J E S N F K R M G H Y Z a K J D X h 51 58 1 64 3 66 65 2 E F 9 G H 17 25 34 43 10 16 24 33 42 50 63 57 F 35 19-35 M 66 22D F 32 19-32 I 32 20 19-31 M 2 1 12 8 Coax 12 22D 19-30 I 29 1 20 16 g b L C W c E 4 B V f j M N A U e d P f a 19-28 I 26 2 20 16 R C U C V K G H J U e Y T S A W B T d b L F V A c N M Y K 19-17 M 1 4 2 10 22D 20 16 8 Twinax 4 5 W L H 1 2 3 c P C V e S R B U d P C J A R B K S T S Y 1 J L A H B K G N 79 21 C L R D F 4 5 D g N m q n C D Z a b G H d L E F c p e M 11 F J K G 39 21-39 I 37 2 20 16 G 35 21-35 M 79 22D G 16 21-16 II 16 16 r f P 41 B Y k h R 71 61 E G G 11 21-11 I 11 12 1 2 3 P H E i S A X j T B M J C U 31 51 S W V A K Y V T i C Y k s F M L C G d e 4 5 J K G 75 21-75 M 4 8 Coax or 8 Twinax* 21-48 M 4 8 Power Y N A M P L R L C X V K T H 21 23-21 II 21 16 1 2 3 4 5 W 7 FF t LL EE s n P 4 5 e JJ R z N 29 37 18 k K m M J4 25-4 I 48 8 20 16 L 99 98 L GG y g 24 34 45 55 66 85 76 x 32 BB HH 33 19 e d c X t E Y F Z u G H 67 45 42 60 51 53 34 35 12 33 11 32 8 9 10 A B H H B J C G K 82 76 C 99 15 93 78 36 49 94 81 68 1 2 26 3 27 4 28 5 29 6 47 30 48 31 7 E D F 84 25-7 M 2 8 Twinax E D J 11 25-11*** N 25-8 8 8 Twinax 2 20 9 10 Power U T j GG y x w g L K Y D Z CC E s DD EE a t F u b c v f M C X r BB FF h B q HH i N V A W p AA z R P n m S k 46 23-54 M 40 9 4 22D 16 12 A G 52 50 18 39 17 38 16 37 15 36 14 13 a b 42 41 23 24 25 44 40 H 53 23-53 I 53 20 72 53 97 22D 19 22 43 20 D s DD v 21 C 85 26 28 CC W L 6 21 r EE w B V J 79 59 41 A U q FF f 93 p F H J M K G g h z 100 74 7 BB 64 24 F AA h 96 97 T n m k N 7 46 1 f AA CC p R 1 2 3 E d P H 35 23-35 M 100 22D 22 y DD q S 5 15 S R 86 6 7 KK r T x HH 67 D 16 D 77 95 F C c Y 56 4 E W B b GG u V U a w v 46 94 23-32 I 32 20 A Z Y X V G 35 3 C U X 25 1 T d H G S c E F H b e 16 2 j f J U g Y D 8 B R a Z K S A P a B W J 23-6 M 6 8 Twinax Y N M C D B H G 41 21-41 I 41 20 1 2 3 F C b c f N A E p q P B D B E a n g R D D Z m t r A B X h S A A j U d e G H J H 55 23-55 I 55 20 TV-CTV W INSERT ARRANGEMENTS TV CTV - E113/D 20/12/01 16:41 Page 10 Insert arrangements Front face view of male insert The major keyway is shown in the normal position Contact size 22D 20 12 16 10 8 Caption 1 2 3 MIL insert arrangement reference TV-CTV insert arrangement reference Service class A U B M T b S q R Z P r s v u w p e K N V U Z C R T G S 1 2 3 15 W G 17 V 22 F 6 G J 8 7 H J 20 25-20*** N 13 3 16 8 Twinax 21 25 23 9 16 K H 19 24 E 5 U J 10 20 18 10 4D T a L V 13 20 Z X W K J 19 25-19 I 19 12 6 8 Twinax 6 C 3 S 14 E F 2 11 R Y M U 2 G 25-17 M 36 22D 7 F J D 1 3 X L E H H K 4 F X L Y M J T 5 D W h Y M E f g k P 12 B N C 1 A P B P D t m N N L A R B V d c n 4 5 S A C a Number of contacts Contact sizes 4 5 J 24 25-24 I 12 12 16 12 4 12 Coax 25-26 I 16 5 4 20 12 8 Coax Y A 15 R 8 B S P T c b 36 48 59 71 82 N 115 T 122 D a f E Z Y X J H F K P d p 35 47 58 81 93 104 70 D X k r c F Z n G a b M E Y m 128 24 H 114 L J K J 35 25-35 M 128 22D J 29 25-29 I 29 16 4 5 q 121 14 G 1 2 3 e N 7 C W h f R W e L B V g S 125 4 V d M A U 94 105 1 C U 25 25-37 I 37 16 Y A P d X M n p L g q s c k K h r 1 2 3 4 5 b V D a E F *** Y A B p w a q D G H T E U k v x r F T u t s d G S H P g f N M e L J 43 25-43 I 23 20 20 16 J K Y D a b n P z N d k M y h x e g L f K G H J 25-46 I 40 4 2 20 16 8 Coax r FF HH JJ NN PP EE U F c w m V q p S R C KK y BB m I J k M L f E g F h AA CC n D e x z P N B d w LL MM DD T A c v GG s E b u t W p R X C Z v AA Z a Y B X s r q S c u t U C b A W V R U 25-41 I 22 3 11 2 3 22D 20 16 12 Coax 8 Twinax * m h i V J T t j C S f n W R Z e m W X B Y N Z Y G H J K J 61 25-61 I 61 20 Military P/N delivered with 8 twinax and proprietary P/N delivered with size 8 coaxial contacts for RG 180 and RG 195 wire For MIL STD 1760 application Available in hermetic version Delivered with twinax contacts for double braid cable (PAN 6421, AECMA Pr EN 3375 - 004, Raychem 10613, EPD44692, EPD44693). Delivered with twinax contacts for simple braid cable (M17/1760002, AECMA Pr EN 3375 - 003, Raychem 10612, EPD44690, EPD44691). 8 Arrangements CTV TV Page 11 Service Total Class number of 22D 20 contacts 9-5** 9-5** 9-35 9-35 M 6 9-94 9-94 M 2 2 9-98 9-98 I 3 3 11-1 11-1 11-2** 11-2** 11-2 11-2 I 2 11-5 11-5 I 5 1 2 II 1 M 13 11-98 11-98 I 6 6 11-99 11-99 I 7 7 13-4** 13-4** 13-4 13-4 I 4 13-8 13-8 I 8 13-35 13-35 M 22 13-98 13-98 I 10 15-5** 15-5** 1 13 4 4 X 5 X 4 8 22 10 5 15-5 15-5 II 5 15-15 15-15 I 15 14 15-18 15-18 I 18 18 15-19 15-19 I 19 15-35 15-35 M 37 15-97 15-97 I 12 17-2 17-2 M 39 17-6** 17-6** 5 1 19 37 8 4 38 1 6 I 6 6 17-8 II 8 17-20 17-20 M 20 8 X 17-22 17-26 17-26 I 26 17-35 17-35 M 55 17-75 17-75 I 2 17-99 17-99 I 23 4 2 4 19-11 19-11 II 11 19-17 19-17 M 17 19-28 19-28 I 28 19-30 19-30 I 30 19-31 19-31 M 15 19-32 19-32 I 32 19-35 19-35 M 66 21-11 21-11 I 11 21-16** 21-16** 2 2 11 10 1 4 26 2 29 1 2 12 1 2 32 66 11 16 16 16 21-35 21-35 M 79 21-39 21-39 I 39 37 21-41 21-41 I 41 41 21-48 21-48 21-75 21-75 4 2 2 21 II 4 X 55 21-16 4 2 26 21-16 M X 8 16 4 17-22 X 6 8 17-8 21-75** 21-75** X 5 11-12 17-6 X 2 11-35 17-8** X 1 2 17-22** 17-22** 9 1 6 11-35 17-8** 16 16G** 12 Grounded insert 12 12G** 10 8 8 8 triax 8G** availability** coax power power coax of twinax P S 1 11-12 17-6 Number and size of contacts INSERT ARRANGEMENTS 20/12/01 16:41 TV-CTV TV CTV - E113/D X 16 79 2 4 4 4 X Legend: ** Grounded version (metallic insert for use with coaxial or twinax contacts, for receptacle only). For details, please refer to page 19 *** 25-11 and 25-20 arrangements used for interconnection per MIL-STD-1760 INSERT ARRANGEMENTS TV CTV - E113/D 20/12/01 16:41 Arrangements CTV Page 12 Service Total Class number of 22D 20 contacts TV 23-6 23-6 M 23-6** 23-6** M 6 23-21 23-21 II 21 23-21** 23-21 II 21 23-32 23-32 I 32 23-35 23-35 M 100 23-53 23-53 I 53 23-54 23-54 M 53 23-55 23-55 I 55 25-4 25-4 I 56 25-7 25-7 M 99 25-8 25-8 M 8 25-8** 25-8** Number and size of contacts 16 16G** 12 12 12G** 10 coax power 8 8 8 triax 8G** coax of twinax 6 M 8 25-11*** 25-11*** N 11 25-17 25-17 M 42 25-19 25-19 I 19 25-19** 25-19** I 19 25-20*** 25-20*** N 30 25-24 25-24 I 24 25-26 25-26 I 25 25-29** 25-29** I 29 25-29 25-29 I 29 25-35 25-35 M 128 25-37 25-37 I 37 25-41 25-41 I 41 25-43 25-43 I 25-46 25-46 I 25-61 25-61 I Grounded insert availability P S 6 6 X 21 21 X 32 100 53 40 9 4 55 48 8 97 2 8 8 2 X 9 36 6 19 19 10 13 X 4* 12 3 12 16 5 4 29 X 29 128 37 22 3 11 43 23 20 46 40 4 61 61 2* 3 2 Legend: ** Grounded version (metallic insert for use with coaxial or twinax contacts, for receptacle only). For details, please refer to page 19 *** 25-11 and 25-20 arrangements used for interconnection per MIL-STD-1760 Coding - polarization To avoid cross-plugging problems in applications requiring the use of more than one MIL-DTL-38999 III connector of the same size, alternate key-rotations are available as indicated in the accompanying chart. As shown in the diagram below, the secondary keys rotate clockwise from the major one. In the reference system, the polarizationis shown by the letters N, A, B, C, D or E. Major key Shell size 9 11 13 and 15 Major key AP BSC BP BSC CP BSC DP BSC PLUG -- Front face shown 17 and 19 AR BSC BR BSC DR BSC CR BSC RECEPTACLE -- Front face shown 21 23 and 25 Coding identification letter AR or AP BSC BR or BP BSC CR or CP BSC DR or DP BSC N A B C D E N A B C D E N A B C D E N A B C D E 105 102 80 35 64 91 95 113 90 53 119 51 80 135 49 66 62 79 80 135 49 66 62 79 140 132 118 140 155 131 141 156 145 156 146 141 142 170 169 140 145 153 142 170 169 140 145 153 215 248 230 205 234 197 208 182 195 220 176 184 196 200 200 200 180 197 196 200 200 200 180 197 265 320 312 275 304 240 236 292 252 255 298 242 293 310 244 257 280 272 293 310 244 257 280 272 10 20/12/01 16:41 Page 13 CTV composite shells Presentation Tri-Start CTV series are in accordance with MIL-DTL-38999-III. The composite used for this series was developed to meet aeronautic market requirements: * Mass saving (20-40% compared to Aluminium versions / 60-70% compared to stainless steel versions) * Great corrosion resistance * Useful life extension * Great EMI-RFI shielding CTV COMPOSITE SHELLS TV CTV - E113/D CTV Connectors are intermatable and intermountable with TV metallic versions. Note: Locking rings and hexagonal nuts are delivered without plating (black) Main characteristics * Shell to shell conductivity: - Individual value: 3 millivolts - Value after test: 6 millivolts * Durability: - 500 cycles with standards contacts - 1500 cycles with "H" type (M 39029) pin contacts and "J" type (M 39029) socket contacts * Hydrostatic stability: NASA OUTGASSING SP-R 0022 , 40 * Ozone exposure: 3.32 MIL-DTL-38999 * Moisture exposure: MIL-STD-810C, method 508-2 * Standard MIL wiring tools Overall dimensions - Composite versions CTVP00RW JD38999/20J CTVPS00RF JD38999/20M Square flange receptacle S 2 PLACES R1 2 PLACES R2 2 PLACES 23.11 0.13 M B THREAD CLASS 2A 0.1P-0.3L-TS L T 0.13 M 4 PLACES V THREAD METRIC MIL-DTL-38999 Amphenol Series III Socapex A 11 9 M B Thread (inches) L Max (mm) +0.00 -0.13 R1 (mm) (mm) .6250 13.055 19.685 18.26 R2 S T 0.25 +0.20 -0.13 (mm) (mm) (mm) Z1 Max (mm) 15.09 23.83 3.25 5.03 TT +0.20 -0.13 (mm) 5.49 V thread metric M12x1-6g B 11 .7500 13.055 19.685 20.62 18.26 26.19 3.25 5.03 4.93 M15x1-6g C 13 .8750 13.055 19.685 23.01 20.62 28.58 3.25 5.03 4.93 M18x1-6g D 15 1.0000 13.055 19.685 24.61 23.01 30.96 3.25 5.03 4.39 M22x1-6g E 17 1.1875 13.055 19.685 26.97 24.61 33.32 3.25 5.03 4.93 M25x1-6g F 19 1.2500 13.055 19.685 29.36 26.97 36.53 3.25 5.03 4.93 M28x1-6g G 21 1.3750 13.843 18.923 31.75 29.36 39.67 3.25 5.79 4.93 M31x1-6g H 23 1.5000 13.843 18.923 34.93 31.75 42.88 3.91 5.79 6.15 M34x1-6g J 25 1.6250 13.843 18.923 38.10 34.93 46.02 3.91 5.79 6.15 M37x1-6g For panel drilling, please refer to page 15 For PCB contacts stickout, please refer to page 16 TV-CTV Shell size TT Z1 CTV COMPOSITE SHELLS TV CTV - E113/D 20/12/01 16:41 Page 14 CTV07 RW JD38999/24J CTVS07 RF JD38999/24M Jam nut receptacle PANEL THICKNESS 1.57 MIN 3.18 MAX C T SHELL SIZE TO 9/11 9.11 MAX SHELL SIZE TO 13/25 9.04 MAX A V THREAD METRIC B THREAD CLASS 2A 0.1P-0.3L-TS H S 2.31 MAX Shell sizes 9/11 - 22.12 Shell sizes 13/25 - 22.30 Shell size A MIL-DTL-38999 Series III Amphenol Socapex (mm) B Thread (inches) A 9 16.99 .6250 +0.00 -0.025 C Max (mm) 30.45 H Hex S T +0.043 -0.041 +0.028 -0.025 0.025 -0.000 (mm) (mm) (mm) 22.23 26.97 17.70 V thread metric Hex nut max torque N.m M12x1-6g 4.1 B 11 19.53 .7500 35.20 25.40 31.75 20.88 M15x1-6g 5.3 C 13 24.26 .8750 38.38 30.17 34.92 25.58 M18x1-6g 6.9 D 15 27.53 1.0000 41.55 33.32 38.10 28.80 M22x1-6g 8.6 E 17 30.68 1.1875 44.73 36.52 41.28 31.98 M25x1-6g 9.8 F 19 33.86 1.2500 49.50 39.67 46.02 35.15 M28x1-6g 10.9 G 21 37.06 1.3750 52.65 42.87 49.22 38.28 M31x1-6g 12.7 H 23 40.00 1.5000 55.85 46.02 52.37 41.50 M34x1-6g 13.8 J 25 43.41 1.6250 59.00 50.80 55.57 44.68 M37x1-6g 15 For panel drilling, please refer to page 15 For PCB contacts stickout, please refer to page 16 31.34 MAX CTV06 RW JD38999/26J CTVS06 RF JD38999/26M Straight plug Q V THREAD METRIC 9.12 MAX B THREAD CLASS 2B 0.1P-0.3L-TS + 0.08 15.01 - 0 Shell size MIL-DTL-38999 Series III Amphenol Socapex B Thread (inches) Q Max (mm) V thread metric (mm) A 9 .6250 21.82 M12x1-6g B 11 .7500 24.99 M15x1-6g C 13 .8750 29.39 M18x1-6g D 15 1.0000 32.49 M22x1-6g E 17 1.1875 35.69 M25x1-6g F 19 1.2500 38.48 M28x1-6g G 21 1.3750 41.68 M31x1-6g H 23 1.5000 44.88 M34x1-6g J 25 1.6250 47.98 M37x1-6g 12 20/12/01 16:41 Page 15 TV metallic shells TVS-F / TV-W Aluminium shells Presentation Aluminium TV shell connectors are used in professional and international electronic defense programs in standard environmental conditions. Main characteristics TV METALLIC SHELLS TV CTV - E113/D * Material shell: Aluminium alloy. * Shell to shell conductivity: - 1 m for F class - 2.5 m for W class * EMI-RFI shielding: - 65 db to 10 Ghz, F class - 50 db to 10 Ghz, W class - 85 db to 1 Ghz, F and W class * Standard MIL wiring tools TVS-B Marine bronze shells Presentation TVS-B bronze shell connectors are not defined in MIL-DTL-38999-III-J standard but they are based on its requirements. TVS-B connectors conform to the European standard CECC 75.201.002. This series was initially selected by the British Navy for a new generation of ships. By extension a lot of the NATO Navy choose this series as a standard of interconnection. TVS-B connector is now the most popular circular connector to be used in marine application. Main characteristics * Material shell: Nickel aluminium bronze DGS 1043. * EMI-RFI shielding: > 65 dB at 100 Mhz to 10 Ghz. * Standard MIL wiring tools TVS-K / TVS-S Stainless steel shells Stainless steel shell connectors are used in high temperature environments and in harsh vibration conditions. They provide FIREWALL capabilities. Main characteristics * Thermosetting insert * Working temperature: - 65C, + 200C - 1093C during 20 minutes * Shell to shell conductivity: - 10 millivolts for K class - 1 millivolts for S class * EMI-RFI shielding: 13 - 45 dB mini at 10 Ghz for K class - 65 dB mini at 10 Ghz for S class TV-CTV Presentation 20/12/01 16:41 Page 16 Overall dimensions / Metallic versions TVP00RW TVPS00RF TVPS00RB TVPS00RK TVPS00RS Square flange JD38999/20W JD38999/20F 22.99 JD38999/20K JD38999/20S receptacle S 2 PLACES R1 2 PLACES R2 2 PLACES +0.15 0 M L T 0.13 M 4 PLACES V THREAD METRIC Z B TT TV METALLIC SHELLS TV CTV - E113/D B Thread Class 2A MIL-DTL-38999 Amphenol 0.1P-0.3L-TS Series III Socapex (inches) Shell size M L Max (mm) +0.00 -0.13 R1 (mm) (mm) R2 T S 0.25 +0.20 -0.13 (mm) (mm) (mm) Z Max (mm) TT +0.20 -0.13 (mm) V thread metric A 9 .6250 11.91 20.83 18.26 15.09 23.83 3.25 3.89 5.49 M12x1-6g B 11 .7500 11.91 20.83 20.62 18.26 26.19 3.25 3.89 4.93 M15x1-6g C 13 .8750 11.91 20.83 23.01 20.62 28.58 3.25 3.89 4.93 M18x1-6g D 15 1.0000 11.91 20.83 24.61 23.01 30.96 3.25 3.89 4.39 M22x1-6g E 17 1.1875 11.91 20.83 26.97 24.61 33.32 3.25 3.89 4.93 M25x1-6g F 19 1.2500 11.91 20.83 29.36 26.97 36.53 3.25 3.89 4.93 M28x1-6g G 21 1.3750 12.70 20.07 31.75 29.36 39.67 3.25 4.65 4.93 M31x1-6g H 23 1.5000 12.70 20.07 34.93 31.75 42.88 3.91 4.65 6.15 M34x1-6g J 25 1.6250 12.70 20.07 38.10 34.93 46.02 3.91 4.65 6.15 M37x1-6g For panel drilling, please refer to page 15 For PCB contacts stickout, please refer to page 16 PANEL THICKNESS 1,57 MIN, 3,18 MAX TV07RW JD38999/24W TVS07RF JD38999/24F TVS07RB TVS07RK JD38999/24K TVS07RS JD38999/24S Jam nut receptacle C T N MAX Size 9/11 = 9,45 Size 13/25 = 9,37 A B V 2,31 MAX K REF H S Size 9/11 = 22,12 Size 13/25 = 22,30 Shell size MIL-DTL-38999 Amphenol Series III Socapex B Thread Class 2A 0.1P-0.3L-TS (inches) (mm) C Max (mm) A +0.00 -0.025 H Hex S T +0.043 -0.041 0.25 0.025 -0.000 (mm) (mm) (mm) V thread metric Hex nut max torque value N.m A 9 .6250 16.99 30.45 22.23 26.97 17.70 M12x1-6g 4.1 B 11 .7500 19.53 35.20 25.40 31.75 20.88 M15x1-6g 5.3 C 13 .8750 24.26 38.38 30.17 34.93 25.58 M18x1-6g 6.9 D 15 1.0000 27.53 41.55 33.32 38.10 28.80 M22x1-6g 8.6 E 17 1.1875 30.68 44.73 36.52 41.28 31.98 M25x1-6g 9.8 F 19 1.2500 33.86 49.50 39.67 46.02 35.15 M28x1-6g 10.9 G 21 1.3750 37.06 52.65 42.87 49.23 38.28 M31x1-6g 12.7 H 23 1.5000 40.00 55.85 46.02 52.37 41.50 M34x1-6g 13.8 J 25 1.6250 43.41 59.00 50.80 55.58 44.68 M37x1-6g 15 For panel drilling, please refer to page 15 For PCB contacts stickout, please refer to page 16 14 20/12/01 16:41 TV06RW TVS06RF TVS06RB TVS06RK TVS06RS Straight plug Page 17 PANEL DRILLING FOR COMPOSITE AND METALLIC RECEPTACLES TV CTV - E113/D JD38999/26W JD38999/26F JD38999/26K JD38999/26S 31.34 MAX Q Q (W88) V 9.12 MAX B + 0.1 15.01 - 0.0 Shell size B Thread Class 2A 0.1P-0.3L-TS (mm) Q Max (mm) V thread metric Q (W88)* (mm) MIL-DTL-38999 Series III Amphenol Socapex A 9 .6250 21.82 M12x1-6g 21.1 B 11 .7500 24.62 M15x1-6g 23.8 C 13 .8750 28.98 M18x1-6g 28.2 D 15 1.0000 32.16 M22x1-6g 31.4 E 17 1.1875 35.33 M25x1-6g 36.5 F 19 1.2500 38.10 M28x1-6g 39.3 G 21 1.3750 41.28 M31x1-6g 42.5 H 23 1.5000 44.45 M34x1-6g 45.3 J 25 1.6250 47.63 M37x1-6g 48.4 * Conforms to CECC 75.201.002 Panel drilling for composite and metallic receptacles Square flange receptacle rear panel mounting R3 R4 Square flange receptacle front panel mounting R3 R4 OE 4OW F OB OD 4OW Jam nut receptacle rear panel mounting G V Shell size MIL-DTL-38999 Amphenol Series III Socapex 15 R3 R4 (mm) (mm) V Mini (mm) OW (mm) G Mini (mm) OE Mini (mm) +0 -0.25 F TV-CTV V (mm) OB Mini (mm) OD Mini (mm) +0 -0.25 A 9 18.26 15.09 24.60 3.25 27.80 17.70 16.99 16.66 13.11 B 11 20.62 18.26 27.00 3.25 32.60 20.88 19.53 20.22 15.88 C 13 23.01 20.62 31.50 3.25 36.00 25.58 24.26 23.42 19.05 D 15 24.61 23.01 34.50 3.25 39.60 28.80 27.53 26.59 23.01 E 17 26.97 24.61 28.00 3.25 43.30 31.98 30.68 30.96 25.81 F 19 29.36 26.97 40.50 3.25 47.00 35.16 33.86 32.94 28.98 G 21 31.75 29.36 44.00 3.25 50.60 38.28 37.06 36.12 32.16 H 23 34.93 31.75 47.00 3.81 54.20 41.50 40.01 39.29 34.93 J 25 38.10 34.93 50.00 3.81 59.70 44.68 43.41 42.47 37.69 PRINTED CIRCUIT BOARD DRILLING TV CTV - E113/D 20/12/01 16:41 Page 18 Printed circuit board drilling Receptacles equipped with size 22D contacts The marking of contact cavities is shown on the mating side view of the male receptacle. The marking on the female plug is symmetrical in relation to the +X/-Y axis. x y Cavity marking (mm) (mm) x y Cavity marking (mm) (mm) 1 + 1.14 + 1.98 2 + 1.98 - 1.14 - 2.29 3 0 4 - 1.98 - 1.14 5 - 1.14 + 1.98 0 6 0 1 2 3 4 5 6 7 8 9 10 11 12 13 9-35 +Y 5 -X 1 6 4 +X 2 0 + 2.16 + 3.51 + 3.51 + 2.16 0 - 2.16 - 3.51 - 3.51 - 2.16 0 + 1.24 - 1.24 -X -Y 6 contacts size 22D 11-35 O 0.8 mini +Y 9 8 7 13 1 2 3 4 1 2 11 6 3 12 4 5 +X + 1.14 + 3.20 + 4.62 + 5.16 15-35 17 18 2 16 30 19 3 15 29 36 31 20 4 14 28 35 37 32 21 27 22 5 34 33 13 26 23 6 12 25 24 7 11 8 9 10 -X O 0.8 mini x y Cavity marking (mm) (mm) 1 2 3 4 5 6 7 8 1 -Y x y Cavity marking (mm) (mm) + 6.65 + 5.51 + 4.06 + 2.03 - 0.25 - 2.49 - 4.45 - 5.89 + 1.14 + 3.12 + 5.36 + 6.45 + 6.76 + 6.27 + 5.08 + 3.30 +X x y Cavity marking (mm) (mm) 5 6 7 8 + 5.00 + 4.01 + 2.24 0 9 10 11 12 13 14 15 16 + 1.14 - 1.14 - 3.30 - 5.08 - 6.27 - 6.76 - 6.45 - 5.36 - 6.65 - 6.65 - 5.89 - 4.45 - 2.49 - 0.25 + 2.03 + 4.06 17 25 34 43 51 26 35 4 58 18 44 27 36 52 11 45 19 59 64 28 1 5 12 34 53 46 20 60 6 13 38 29 54 10 -X 2 O 0.8 mini + 5.51 + 6.65 + 4.35 + 3.02 + 1.02 - 1.27 - 3.23 - 4.37 - 4.37 - 3.23 - 1.27 + 1.02 + 3.02 + 4.37 + 1.88 - 0.10 - 2.08 - 2.08 - 0.10 + 1.88 - 0.10 +X 61 47 21 39 30 55 3 8 14 66 62 22 48 31 40 56 9 15 49 23 32 63 41 16 57 24 33 42 50 -Y - 9.07 - 9.07 - 9.07 - 7.09 - 7.09 - 7.09 - 7.09 - 7.09 - 7.09 - 5.11 - 5.11 - 5.11 - 5.11 - 5.11 - 5.11 - 5.11 - 3.12 x Cavity marking (mm) + 1.35 + 3.71 + 5.89 + 7.77 + 9.27 + 10.31 + 10.85 + 10.85 + 10.31 + 9.27 + 7.77 + 5.89 + 3.71 + 1.35 - 1.35 - 3.71 - 5.89 - 7.77 - 9.27 - 10.31 - 10.85 - 10.85 - 10.31 - 9.27 - 7.77 - 5.89 - 3.71 + 2.29 0 - 2.29 + 5.72 + 3.43 + 1.14 - 1.14 - 3.43 - 5.72 + 6.86 + 4.57 + 2.29 0 - 2.29 - 4.57 - 6.86 + 8.00 y (mm) + 10.82 + 10.26 + 9.19 + 7.67 + 5.77 + 3.58 + 1.22 - 1.22 - 3.58 - 5.77 - 7.67 - 9.19 - 10.26 - 10.82 - 10.82 - 10.26 - 9.19 - 7.67 - 5.77 - 3.58 - 1.22 + 1.22 + 3.58 + 5.77 + 7.67 + 9.19 + 10.26 x y Cavity marking (mm) (mm) 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 - 3.12 - 3.12 - 3.12 - 3.12 - 3.12 - 3.12 - 3.12 - 1.14 - 1.14 - 1.14 - 1.14 - 1.14 - 1.14 - 1.14 - 1.14 - 1.14 + 1.14 x Cavity marking (mm) 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 - 1.35 0 + 2.49 + 4.67 + 6.55 + 7.90 + 8.43 + 8.43 + 7.90 + 6.55 + 4.67 + 2.49 0 - 2.49 - 4.67 - 6.55 - 7.90 - 8.43 - 8.43 - 7.90 - 6.55 - 4.67 - 2.49 - 1.22 + 1.22 + 3.40 + 5.28 + 5.72 + 3.43 + 1.14 - 1.14 - 3.43 - 5.72 - 8.00 + 9.14 + 6.86 + 4.57 + 2.29 0 - 2.29 - 4.57 - 6.86 - 9.14 + 9.14 y (mm) + 10.82 + 8.20 + 8.18 + 7.11 + 5.59 + 3.58 + 1.22 - 1.22 - 3.58 - 5.59 - 7.11 - 8.18 - 8.84 - 8.18 - 7.11 - 5.59 - 3.58 - 1.22 + 1.22 + 3.58 + 5.59 + 7.11 + 8.18 + 6.12 + 6.12 + 5.05 + 3.53 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 + 1.14 + 1.14 + 1.14 + 1.14 + 1.14 + 1.14 + 1.14 + 1.14 + 3.12 + 3.12 + 3.12 + 3.12 + 3.12 + 3.12 + 3.12 + 3.12 + 5.11 + 5.11 + 5.11 + 5.11 + 5.11 + 5.11 + 5.11 + 7.09 + 7.09 + 7.09 + 7.09 + 7.09 + 7.09 + 9.07 + 9.07 + 9.07 x Cavity marking (mm) 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 + 6.02 + 6.02 + 5.28 + 3.40 + 1.22 - 1.22 - 3.40 - 5.28 - 6.02 - 6.02 - 5.28 - 3.40 - 1.22 - 1.22 + 3.18 + 3.94 + 3.18 + 1.22 - 1.22 - 3.18 - 3.94 - 3.18 0 + 1.22 - 1.22 - 7.92 - 7.92 - 7.92 - 6.15 - 5.94 - 5.94 - 5.94 - 5.94 - 5.94 - 4.37 - 3.96 - 3.96 - 3.96 - 3.96 x y Cavity marking (mm) (mm) - 4.01 - 2.24 0 + 2.24 + 4.01 + 5.00 + 2.72 + 0.66 - 1.91 - 3.05 - 1.91 + 0.66 + 2.72 - 0.76 15 16 17 18 19 20 21 22 23 24 25 26 27 28 + 2.18 - 0.10 - 2.39 + 5.61 + 3.33 + 1.04 - 1.24 - 3.53 - 5.82 + 7.09 + 4.47 + 2.18 - 0.10 - 2.39 - 3.96 - 3.96 - 2.26 - 1.98 - 1.98 - 1.98 - 1.98 - 1.98 - 1.98 - 1.98 0 0 0 0 x y Cavity marking (mm) (mm) 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 0 0 0 + 2.26 + 1.98 + 1.98 + 1.98 + 1.98 + 1.98 + 1.98 + 1.98 + 4.37 + 3.96 + 3.96 + 3.96 + 3.96 + 3.96 + 3.96 + 6.15 + 5.94 + 5.94 + 5.94 + 5.94 + 5.94 + 7.92 + 7.92 + 7.92 - 2.39 - 4.67 - 6.96 + 8.03 + 5.61 + 3.33 + 1.04 - 1.24 - 3.53 - 5.82 - 8.10 + 7.09 + 4.47 + 2.18 - 0.10 - 2.39 - 4.67 - 6.96 + 5.61 + 3.33 + 1.04 - 1.24 - 3.53 - 5.82 + 2.18 - 0.10 - 2.39 x Cavity marking (mm) y (mm) - 4.67 - 6.96 + 8.03 + 5.61 + 3.33 + 1.04 - 1.24 - 3.53 - 5.82 - 8.10 + 8.36 + 4.47 + 2.18 - 0.10 +Y 25 32 10 33 40 4 18 11 41 47 26 34 1 5 12 19 42 48 53 27 35 6 20 13 43 49 54 3 7 36 44 50 55 21 28 8 45 51 3 14 22 29 37 9 15 23 30 38 52 16 46 24 31 39 17 -X 17-35 + 6.86 + 4.57 + 2.29 0 - 2.29 - 4.57 - 6.86 - 9.14 + 8.00 + 5.72 + 3.43 + 1.14 - 1.14 - 3.43 - 5.72 - 8.00 - 6.86 + 4.57 + 2.29 0 - 2.29 - 4.57 - 6.86 + 5.72 + 3.43 + 1.14 - 1.14 - 3.43 - 5.72 + 2.29 0 - 2.29 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 +X 55 contacts size 22D -Y x Cavity marking (mm) y (mm) + 1.22 - 1.22 - 3.53 - 5.05 - 6.12 - 6.12 - 5.05 - 3.53 - 1.22 + 1.22 + 3.53 + 5.05 + 3.71 + 3.71 + 2.29 0 - 2.29 - 3.71 - 3.71 - 2.29 0 + 2.29 + 1.35 - 0.74 - 0.74 - 2.24 - 4.01 - 5.00 - 5.00 O 0.8 mini 66 contacts x y Cavity size 22D marking (mm) (mm) 65 7 x y Cavity marking (mm) (mm) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 1 2 3 4 5 6 7 8 9 10 11 12 13 14 +Y 19-35 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 - 3.12 - 1.14 + 1.14 + 3.12 + 4.32 + 4.32 + 3.12 + 1.14 - 1.14 - 3.12 - 4.32 - 4.32 - 3.12 - 1.14 + 1.14 + 2.29 + 1.14 - 1.14 - 2.29 - 1.14 0 + 4.62 + 3.20 + 1.14 - 1.14 - 3.20 - 4.62 - 5.16 - 4.62 - 3.20 - 1.14 + 1.14 + 2.97 + 2.36 0 - 2.36 - 2.97 - 1.14 0 -Y x y Cavity marking (mm) (mm) 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 9 10 11 12 13 14 15 16 17 18 19 20 21 22 +X -Y x y Cavity marking (mm) (mm) x y Cavity marking (mm) (mm) 37 contacts size 22D x y Cavity marking (mm) (mm) 1 13 2 21 12 15 3 20 16 11 22 19 17 4 10 5 18 9 6 7 8 -X 13 contacts size 22D O 0.8 mini +Y 22 contacts size 22D +Y 14 10 3 O 0.8 mini 13-35 + 3.71 + 3.00 + 1.14 - 1.14 - 3.00 - 3.71 - 3.00 - 1.14 + 1.14 + 3.00 + 1.42 - 0.89 - 0.89 - 10.87 - 11.86 - 12.40 - 10.54 - 12.40 - 10.87 - 10.87 - 8.43 - 8.43 - 8.43 - 8.43 - 8.43 - 8.43 - 8.43 - 8.43 - 6.32 - 6.32 - 6.32 - 6.32 - 6.32 - 6.32 - 6.32 - 6.32 - 6.32 - 4.22 - 4.22 - 4.22 - 4.22 - 4.22 - 4.22 - 4.22 - 4.22 - 4.22 - 4.22 y (mm) x Cavity marking (mm) + 6.12 + 3.91 + 1.55 0 - 1.55 - 3.61 - 6.02 + 8.46 + 6.05 + 3.63 + 1.22 - 1.19 - 3.61 - 6.02 - 8.43 + 9.65 + 7.24 + 4.83 + 2.41 0 - 2.41 - 4.83 - 7.24 - 9.65 + 10.87 + 8.46 + 6.05 + 3.63 + 1.22 - 1.19 - 3.61 - 6.02 - 8.43 - 10.85 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 - 2.11 - 2.11 - 2.11 - 2.11 - 2.11 - 2.11 - 2.11 - 2.11 - 2.11 - 2.11 - 2.11 0 0 0 0 0 0 0 0 0 0 + 2.11 + 2.11 + 2.11 + 2.11 + 2.11 + 2.11 + 2.11 + 2.11 + 2.11 + 2.11 + 2.11 + 4.22 + 4.22 y (mm) + 12.07 + 9.65 + 7.24 + 4.83 + 2.41 0 - 2.41 - 4.83 - 7.24 - 9.65 - 12.07 + 10.87 + 8.46 + 6.05 + 3.63 + 1.22 - 1.19 - 3.61 - 6.02 - 8.43 - 10.85 + 12.07 + 9.65 + 7.24 + 4.83 + 2.41 0 - 2.41 - 4.83 - 7.24 - 9.65 - 12.07 + 10.87 + 8.46 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 + 4.22 + 4.22 + 4.22 + 4.22 + 4.22 + 4.22 + 4.22 + 4.22 + 6.32 + 6.32 + 6.32 + 6.32 + 6.32 + 6.32 + 6.32 + 6.32 + 6.32 + 8.43 + 8.43 + 8.43 + 8.43 + 8.43 + 8.43 + 8.43 + 8.43 + 10.87 + 11.86 + 12.40 + 10.54 + 12.40 + 10.87 + 10.87 + 6.05 + 3.63 + 1.22 - 1.19 - 3.61 - 6.02 - 8.43 - 10.85 + 9.65 + 7.24 + 4.83 + 2.41 0 - 2.41 - 4.83 - 7.24 - 9.65 - 8.46 + 6.05 + 3.63 + 1.22 - 1.19 - 3.61 - 6.02 - 8.43 + 6.12 + 3.91 + 1.55 0 - 1.55 - 3.61 - 6.02 23-35 21-35 100 contacts size 22D 79 contacts size 22D +Y +Y 25 46 16 35 56 26 47 57 36 19 27 48 37 58 18 2 10 19 28 38 49 59 3 29 50 60 39 4 11 20 5 12 21 40 61 30 51 13 22 41 62 6 14 31 52 42 63 23 53 7 32 64 35 54 15 33 24 44 66 34 55 45 8 27 28 -X 1 2 3 26 29 4 25 50 30 49 51 52 31 5 66 24 48 53 32 6 23 47 65 76 67 68 69 54 33 70 55 34 7 22 46 64 75 77 79 78 21 74 71 56 35 8 45 63 73 72 57 36 9 20 44 62 58 37 19 43 61 60 59 38 10 18 42 41 11 40 39 17 12 16 15 14 13 O 0.8 mini -Y -X +X 17 O 0.8 mini -Y 67 68 69 70 71 77 78 79 80 81 86 87 94 88 89 16 95 96 97 90 99 98 72 82 73 91 100 83 74 92 84 75 93 85 76 +X 20/12/01 16:41 Page 19 PRINTED CIRCUIT BOARD DRILLING TV CTV - E113/D 25-35 128 contacts size 22D +Y 36 59 82 25 94 71 48 15 37 83 105 60 95 72 115 8 16 26 38 49 61 84 106 96 50 73 27 122 1 39 85 107 62 17 97 116 123 28 51 74 2 9 18 40 86 108 63 98 117 124 52 29 75 3 10 19 41 87 109 64 99 53 76 11 125 4 118 77 12 20 30 42 54 88 110 65 5 100 126 31 119 55 78 13 21 43 89 111 66 6 32 101 120 127 56 79 22 67 90 112 44 7 128 102 33 57 80 23 91 113 45 68 14 34 103 121 58 81 46 69 92 114 24 104 35 93 47 70 -X x Cavity marking (mm) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 y (mm) - 2.17 - 13.21 - 13.87 - 14.10 - 13.87 - 13.21 - 12.17 - 10.77 - 10.54 - 10.54 - 10.54 - 10.54 - 10.54 - 10.77 - 8.43 - 8.43 - 8.43 - 8.43 - 8.43 - 8.43 - 8.43 - 8.43 x Cavity marking (mm) + 7.09 + 4.83 + 2.41 0 - 2.41 - 4.83 - 7.09 + 9.07 + 4.83 + 2.41 0 - 2.41 - 4.83 - 9.07 + 11.28 + 8.43 + 6.02 + 3.61 + 1.19 - 1.19 - 3.61 - 6.02 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 - 8.43 - 8.43 - 6.32 - 6.32 - 6.32 - 6.32 - 6.32 - 6.32 - 6.32 - 6.32 - 6.32 - 6.32 - 6.32 - 4.06 - 4.22 - 4.22 - 4.22 - 4.22 - 4.22 - 4.22 - 4.22 - 4.22 y (mm) x Cavity marking (mm) - 8.43 - 10.85 + 12.60 + 9.65 + 7.24 + 4.83 + 2.41 0 - 2.41 - 4.83 - 7.24 - 9.65 - 12.07 + 13.49 + 10.85 + 8.43 + 6.02 + 3.61 + 1.19 - 1.19 - 3.61 - 6.02 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 - 4.22 - 4.22 - 4.22 - 2.11 - 2.11 - 2.11 - 2.11 - 2.11 - 2.11 - 2.11 - 2.11 - 2.11 - 2.11 - 2.11 0 0 0 0 0 0 0 0 128 contacts size 22D -Y O 0.8 mini y (mm) - 8.43 - 10.85 - 13.26 +12.07 + 9.65 + 7.24 + 4.83 + 2.41 0 - 2.41 - 4.83 - 7.24 - 9.65 - 12.07 + 13.26 + 10.85 + 8.43 + 6.02 + 3.61 + 1.19 - 1.19 - 3.61 +X x Cavity marking (mm) 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 0 0 0 0 + 2.11 + 2.11 + 2.11 + 2.11 + 2.11 + 2.11 + 2.11 + 2.11 + 2.11 + 2.11 + 2.11 + 4.06 + 4.22 + 4.22 + 4.22 + 4.22 + 4.22 + 4.22 y (mm) x Cavity marking (mm) - 6.02 - 8.43 - 0.85 - 14.10 + 12.70 + 9.65 + 7.24 + 4.83 + 2.41 0 - 2.41 - 4.83 - 7.24 - 9.65 - 12.07 + 13.49 + 10.85 + 8.43 + 6.02 + 3.61 + 1.19 - 1.19 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 y (mm) + 4.22 + 4.22 + 4.22 + 4.22 + 4.22 + 6.32 + 6.32 + 6.32 + 6.32 + 6.32 + 6.32 + 6.32 + 6.32 + 6.32 + 6.32 + 6.32 + 8.43 + 8.43 + 8.43 + 8.43 + 8.43 + 8.43 x Cavity marking (mm) - 3.61 - 6.02 - 8.43 - 10.85 - 13.26 +12.60 + 9.65 + 7.24 + 4.83 + 2.41 0 - 2.41 - 4.83 - 7.24 - 9.65 -12.07 +11.28 + 8.43 + 6.02 + 3.61 + 1.19 - 1.19 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 + 8.43 + 8.43 + 8.43 + 8.43 + 10.77 + 10.54 + 10.54 + 10.54 + 10.54 + 10.54 + 10.77 + 12.07 + 13.21 + 13.87 + 14.10 + 13.87 + 13.21 + 12.17 y (mm) - 3.61 - 6.02 - 8.43 - 10.85 + 9.07 + 4.83 + 2.41 0 - 2.41 - 4.83 - 9.07 + 7.09 + 4.83 + 2.41 0 - 2.41 - 4.83 - 7.09 Receptacles equipped with size 20 contacts The marking of contact cavities is shown on the mating side view of the male receptacle. The marking on the female plug is symmetrical in relation to the +X/-Y axis. + 1.65 0 - 1.65 A B C D E F + 0.97 - 1.91 + 0.97 11-98 9-98 0 + 3.30 + 1.65 - 1.65 - 3.30 0 +Y + 3.30 0 - 2.87 - 2.87 0 0 A H G -X 3 contacts size 20 +Y -X -X +X E D B -Y O 1 mini F O 1 mini B -Y 13-98 +Y M L N -X K G x y Cavity marking (mm) (mm) A B 0 + 3.30 + 5.72 + 5.72 C +X D E H O 1 mini B S T J 17 P R V U 19 contacts size 20 A F -Y x y Cavity marking (mm) (mm) C D + 4.95 + 6.60 + 2.87 0 + 4.95 + 3.30 0 - 3.30 - 4.95 - 6.60 - 4.95 - 3.30 - 1.65 + 1.65 + 3.30 + 1.65 - 1.65 - 3.30 0 + 4.95 + 3.81 + 0.76 - 2.67 - 3.43 - 2.67 + 0.76 + 3.81 - 0.38 - 0.38 C -Y x y Cavity marking (mm) (mm) E F G H J K L M N P R S T U V 0 + 3.18 + 4.90 + 4.17 0 - 4.17 - 4.90 - 3.18 + 1.65 - 1.65 +X 6 contacts size 20 x y Cavity marking (mm) (mm) 15-19 +X E O 1 mini A A C C D F +Y A B C D E F G H J K B J K x y Cavity marking (mm) (mm) - 2.87 - 5.72 - 5.72 - 5.72 - 2.87 0 + 2.87 + 5.72 + 2.87 + 2.87 0 - 2.87 - 2.87 0 0 A B C D 0 + 3.33 + 6.07 + 7.75 y Repere x contact (mm) (mm) + 8.15 + 7.44 + 5.44 + 2.51 E F G H + 8.10 + 7.06 + 4.80 + 1.70 - 0.86 - 4.09 - 6.60 - 7.98 +Y R P -X M C U c D V W Y X K J O 1 mini B T b Z L 17-26 A S N a H -Y +X E F G 26 contacts size 20 x y Cavity marking (mm) (mm) J K L M N P R S T U V W X Y Z a b c - 1.70 - 4.80 - 7.06 - 8.10 - 7.75 - 6.07 - 3.33 - 1.78 + 1.78 + 4.45 + 4.52 + 3.02 0 - 3.02 - 4.52 - 4.45 0 0 - 7.98 - 6.60 - 4.09 - 0.86 + 2.51 + 5.44 + 7.44 + 4.50 + 4.50 + 2.39 - 0.91 - 3.84 + 5.16 - 3.84 - 0.91 + 2.39 + 1.65 - 1.65 TV-CTV A B C 10 contacts size 20 x y Cavity marking (mm) (mm) x y Cavity marking (mm) (mm) PRINTED CIRCUIT BOARD DRILLING TV CTV - E113/D 20/12/01 16:41 Page 20 19-32 32 contacts size 22D +Y T S e R d P -X W D X h b a L K +X E F Y Z G H J O 1 mini -Y x y Cavity marking (mm) (mm) + 1.68 + 4.80 + 7.26 + 8.76 + 9.07 C V g c M A B C D E B f j N L M N P R S T U V W X Y Z a b c d e f g h j A U x y Cavity marking (mm) (mm) + 8.97 + 7.75 + 5.51 + 2.49 - 0.84 F G H J K + 8.15 + 6.15 + 3.30 0 - 3.30 21-41 x y Cavity marking (mm) (mm) - 4.06 - 6.73 - 8.51 - 9.12 - 8.51 - 6.15 - 8.15 - 9.07 - 8.76 - 7.26 - 4.80 - 1.68 0 + 3.15 + 5.31 + 5.79 + 4.42 + 1.65 - 1.65 - 4.42 - 5.79 - 5.31 - 3.15 0 + 2.44 0 - 2.44 - 6.73 - 4.06 - 0.84 + 2.49 + 5.51 + 7.75 + 8.97 + 5.84 + 4.90 + 2.41 - 0.84 - 3.84 - 5.61 - 5.61 - 3.84 - 0.84 + 2.41 + 4.90 + 2.44 0 - 2.44 0 V U T -X i W A j X Z r c d e N M O 1 mini H J K L +X F G b p q E a n f P -Y x y Cavity marking (mm) (mm) 0 + 3.28 + 6.23 + 8.58 + 10.09 + 10.60 + 10.09 + 8.58 D m t g T U V W X Y Z a b c d e f g h i j k m n p q r s t C k s x y Cavity marking (mm) (mm) B Y h S R A B C D E F G H 41 contacts size 20 +Y x y Cavity marking (mm) (mm) + 10.60 + 10.09 + 8.58 + 6.23 + 3.28 0 - 3.28 - 6.23 J K L M N P R S + 6.23 + 3.28 0 - 3.28 - 6.23 - 8.58 - 10.09 - 10.60 - 8.58 - 10.09 - 10.60 - 10.09 - 8.58 - 6.23 - 3.28 0 - 10.09 - 8.58 - 6.23 - 3.28 0 + 3.35 + 5.92 + 7.15 + 6.73 + 4.78 + 1.73 - 1.73 - 4.78 - 6.73 - 7.15 - 5.92 - 3.35 0 + 2.98 + 3.71 - 1.66 + 1.66 - 3.71 - 2.98 0 + 3.28 + 6.23 + 8.58 +10.09 + 7.20 + 6.38 + 4.09 + 0.87 - 2.55 - 5.39 - 6.99 - 6.99 - 5.39 - 2.55 + 0.87 + 4.09 + 6.38 + 3.81 + 2.38 - 0.85 - 3.43 - 3.43 - 0.85 + 2.38 0 25-61 61 contacts size 20 23-53 53 contacts size 20 +Y +Y P T n m k AA N z h -X S M y L g x e f K p A V q BB CC HH FF DD w EE u v b d c GG J r W C r -X D U X s E Y t +X q JJ NN MM P a N G D f E g F y LL KK z h AA BB m C e x CC n R B d w PP DD p S F Z FF EE T A c v GG HH s V B U b u t W R Z a Y X I J k L M +X G H J K H O 1 mini -Y O 1 mini -Y x y Cavity marking (mm) (mm) x y Cavity marking (mm) (mm) A B C D E F G H J K L M N P R S T U + 2.84 + 5.72 + 8.53 + 11.43 + 11.43 + 11.43 + 8.53 + 5.72 - 5.72 - 8.53 - 11.43 - 11.43 - 11.43 - 8.53 - 5.72 - 2.84 0 + 2.84 + 11.56 + 9.91 + 8.26 + 3.30 0 - 3.30 - 8.26 - 10.41 - 10.41 - 8.26 - 3.30 0 + 3.30 + 8.26 + 9.91 + 11.56 + 9.91 + 8.26 x y Cavity marking (mm) (mm) V W X Y Z a b c d e f g h k m n p q + 5.72 + 8.53 + 8.53 + 8.53 + 8.53 + 5.72 + 2.84 0 - 2.84 + 5.72 + 8.53 + 8.53 + 8.53 + 8.53 - 5.72 - 2.84 0 + 2.84 A B C D E F G H J K L M N P R S T U V W X x y Cavity marking (mm) (mm) r s t u v w x y z AA BB CC DD EE FF GG HH + 6.60 + 4.95 + 1.65 - 1.65 - 4.95 - 6.60 - 8.26 - 9.91 - 8.26 - 6.60 - 4.95 - 1.65 + 1.65 + 4.95 + 6.60 + 8.26 + 6.60 + 4.95 + 5.72 + 5.72 + 5.72 + 2.84 0 - 2.84 - 5.72 - 5.72 - 5.72 - 2.84 0 + 2.84 + 2.84 0 - 2.84 - 2.84 0 + 3.30 0 - 3.30 - 4.95 - 6.60 - 4.95 - 3.30 0 + 3.30 + 4.95 + 3.30 + 1.65 - 1.65 - 3.30 - 1.65 + 1.65 0 + 4.98 + 7.98 + 10.49 + 12.32 + 13.39 + 13.61 + 12.98 + 11.53 + 9.35 + 6.58 + 3.40 0 - 3.40 - 6.58 - 9.35 - 11.53 - 12.98 - 13.61 - 13.39 - 12.32 - 10.49 x y Cavity marking (mm) (mm) + 12.70 + 11.05 + 8.71 + 5.84 + 2.57 - 0.76 - 4.17 - 7.29 - 9.93 - 11.94 - 13.18 - 13.64 - 13.18 - 11.94 - 9.93 - 7.29 - 4.17 - 0.76 + 2.57 + 5.84 + 8.71 Y Z a b c d e f g h i j k m n p q r s t u - 7.98 - 4.98 - 1.73 + 1.73 + 4.39 + 7.24 + 9.19 + 10.13 + 9.96 + 8.66 + 11.05 + 12.70 + 11.53 + 11.53 + 9.22 + 7.19 + 4.45 + 1.17 - 2.24 - 5.41 - 7.98 + 6.38 - 9.63 + 3.38 - 10.21 - 9.63 0 - 3.38 - 7.98 - 6.38 - 5.41 - 8.65 - 2.24 - 9.96 + 1.17 - 10.13 + 4.45 - 9.19 + 7.19 - 7.24 + 9.22 x y Cavity marking (mm) (mm) v w x y z AA BB CC DD EE FF GG HH JJ KK LL MM NN PP 0 + 3.73 + 6.02 + 6.78 + 5.79 + 3.33 0 - 3.33 - 5.79 - 6.78 - 6.02 - 3.73 0 + 2.67 + 3.43 0 - 3.43 - 2.67 0 + 8.59 + 8.66 + 3.10 - 0.25 - 3.53 - 5.92 - 6.78 - 5.92 - 3.53 - 0.25 + 3.10 + 5.66 + 5.08 + 2.39 - 1.04 - 3.35 - 1.04 + 2.39 0 Please consult us for other insert arrangements. Standard PCB - tail dimensions at the rear of receptacles (in mm) TV 07 & CTV 07 CTVP 00 09 to 11 13 to 25 09 to 19 21 to 25 09 a 19 21 to 25 L2 07 P L2 L1 P00 min 10.13 9.95 11.55 12.31 12.71 13.47 11.07 10.89 12.39 13.15 13.52 14.28 L1 max L2 L1 S L2 L1 TVP 00 min 15.03 14.85 16.45 17.21 17.61 18.37 max 16.17 15.99 17.49 18.25 18.62 19.38 min 9.93 9.75 11.35 12.11 12.51 13.27 max 10.87 10.69 12.19 12.95 13.32 14.08 min 14.83 14.65 16.25 17.01 17.41 18.17 max 15.97 15.79 17.29 18.05 18.42 19.18 Please refer to data sheet E114 for other PCB-tail versions. 18 20/12/01 16:41 Page 21 Data bus "ground plane" receptacle Presentation With Data Bus "Groud Plane" receptacles the electrical link between the outer shielding of coaxial or twinax contacts and the shell of the connector is realized, avoiding any cabling operation between the cable braid and the shell. Main characteristics * Composite shells (for TV metallic shells, please consult us) * Olive drab cadmium or electroless nickel plating * Mate with standard CTV (or TV) plugs * Connect the BUS per STANAG 3910 20 Mbits and STANAG 3838 1 Mbits * Contact resistance < 10 m (Test report BCO 9-8523-1 available) Insert arrangements DATA BUS "GROUND PLANE" RECEPTACLES TV CTV - E113/D Front face view of male insert The major keyway is shown in the normal position 8G Grounded Contact size 12 G Grounded 16 G Grounded Caption MIL insert arrangement reference TV-CTV insert arrangement reference Service class Number of contacts Contact sizes 4 5 A A B A D G B B B C E C 1 2 3 1 8G (TV only) 4 5 13-4 I 4 16G 11-2 I 2 16G 9-05 15-5 C D 17-8 II 8 16G 17-6 I 6 12G 5 16G C F F D D A D B H B E C A E A 17-22 2 12G 2 8G A G L J N R A F B C 21-16 21-75 4 5 16 16G 4 8G 23-6 M 6 8G A A R B N P B S P C D R T c b V U C U N D a f V d M T J E E S Z L H F G 19 1 2 3 4 5 S D T E H M 25-19 I 19 12G C X U F W e Y X J H K F G 25-29 29 16G For insert availability, please refer to pages 9-10. For panel drilling, please refer to page 15. B F K J 1 2 3 L R V D H B W L C D E G K B E C P H A P M D B M S N A A K F G C E D 23-21 25-8 21 16G 8 8G TV-CTV 1 2 3 20/12/01 16:41 Page 22 TVS-Y / TVS-YN hermetic receptacles Presentation Hermetic receptacles TVS-Y and TVS-YN are used in applications which require the maintenance of pressure in the shell or box and in equipments imposing reduce bulk at the rear of connectors. Main characteristics * 9 shell sizes (stainless steel) * Solder pin contacts in nickel alloy * Contact plating in active zone: Gold * Glass insert * Air leakage < 1.10 -7 cm3/s under 1 bar of pressure differential * Passivation or nickel plating Overall dimensions - Hermetic versions TVPS02Y JD38999/21Y TVPS02YN JD38999/21N Square flange receptacle S 23.19 +0.28 0 R1 2.36 +0.15 0 Panel drilling R3 R2 B 0.13 M R2 0.13 M R1 S T V 6.35 MAX Shell size MIL-DTL-38999 Amphenol Series III Socapex B Thread Class 2A 0.1P-0.3L-TS (inches) (mm) R1 4OW R4 TT OY TVS-Y / TVS-YN HERMETIC RECEPTACLES TV CTV - E113/D T TT OW 0.25 +0.20 -0.13 +0.20 -0.13 +0 -0.25 (mm) (mm) (mm) (mm) R2 S R3 R4 (mm) V Mini (mm) OY Mini (mm) (mm) (mm) A 9 .6250 18.26 15.09 23.83 3.25 5.49 3.25 18.26 15.09 24.60 16.66 B 11 .7500 20.62 18.26 26.19 3.25 4.93 3.25 20.62 18.26 27.00 20.22 C 13 .8750 23.01 20.62 28.58 3.25 4.93 3.25 23.01 20.62 31.50 23.42 D 15 1.0000 24.61 23.01 30.96 3.25 4.39 3.25 24.61 23.01 34.50 26.59 E 17 1.1875 26.97 24.61 33.32 3.25 4.93 3.25 26.97 24.61 28.00 30.96 F 19 1.2500 29.36 26.97 36.53 3.25 4.93 3.25 29.36 26.97 40.50 32.94 G 21 1.3750 31.75 29.36 39.67 3.25 4.93 3.25 31.75 29.36 44.00 36.12 H 23 1.5000 34.93 31.75 42.88 3.91 6.15 3.81 34.93 31.75 47.00 39.29 J 25 1.6250 38.10 34.93 46.02 3.91 6.15 3.81 38.10 34.93 50.00 42.47 20 20/12/01 16:41 Page 23 TVS07Y JD38999/23Y TVS07YN JD38999/23N Jam nut receptacle C L 1.57 MINI 3.18 MAX Panel drilling OY O KK Z V B 5.08 MAX K REF Shell size MIL-DTL-38999 Amphenol Series III Socapex H S B Thread Class 2A 0.1P-0.3L-TS (inches) C Maxi (mm) H/plats O KK +0.28 0 0.25 (mm) L Maxi (mm) (mm) +0.043 -0.41 B Z (mm) V Mini (mm) OY Mini (mm) (mm) Hex nut max torque value N.m +0 -0.25 A 9 .6250 30.45 22.23 9.07 16.31 26.97 27.80 17.70 16.99 4.1 B 11 .7500 35.20 25.40 9.07 19.46 31.75 32.60 20.88 19.53 5.3 C 13 .8750 38.38 30.18 9.07 22.66 34.93 36.00 25.58 24.26 6.9 D 15 1.0000 41.55 33.32 9.07 25.86 38.10 39.60 28.80 27.53 8.6 E 17 1.1875 44.73 36.53 9.07 29.01 41.28 43.30 31.98 30.68 9.8 F 19 1.2500 49.50 39.67 9.68 32.21 46.02 47.00 35.16 33.86 10.9 G 21 1.3750 52.65 42.80 9.68 35.36 49.23 50.60 38.28 37.06 12.7 H 23 1.5000 65.85 46.02 9.68 38.56 52.37 54.20 41.50 40.01 13.8 J 25 1.6250 59.00 50.80 9.68 41.71 55.58 59.70 44.68 43.41 15 TVS-Y / TVS-YN HERMETIC RECEPTACLES TV CTV - E113/D TVSIY JD38999/25Y TVSIYN JD38999/25N Solder mounting receptacle L O GG Panel drilling OY M 0.79 +0.15 -0.13 O KK V B 9.53 MAX Shell size MIL-DTL-38999 Amphenol Series III Socapex 21 B Thread Class 2A 0.1P-0.3L-TS (inches) O GG O KK L M +0.28 -0.25 +0.03 -0.13 +0.28 -0 +0.15 -0.13 (mm) (mm) (mm) TV-CTV V (mm) V Mini (mm) OY Mini (mm) A 9 .6250 19.05 17.07 20.47 3.18 24.60 17.60 B 11 .7500 21.44 19.84 20.47 3.18 27.00 20.40 C 13 .8750 24.61 23.01 20.47 3.18 31.50 23.50 D 15 1.0000 27.79 26.19 20.47 3.18 24.50 26.70 E 17 1.1875 30.94 29.36 20.47 3.18 38.00 29.90 F 19 1.2500 33.32 31.75 20.47 3.18 40.50 32.30 G 21 1.3750 36.53 34.93 20.47 3.18 44.00 35.50 H 23 1.5000 39.70 38.10 21.29 3.96 47.00 38.60 J 25 1.6250 42.88 41.28 21.29 3.96 50.00 41.80 LANYARD RELEASE PLUGS TV CTV - E113/D 20/12/01 16:41 Page 24 Lanyard release plugs Presentation Lanyard release plugs meet the requirements of the standard MIL-DTL-38999 III standard, as well as the specific MIL-STD-1760 version that also meets MIL-STD-1760 and STANAG 3837 AA. 2 insert arrangements are available in MIL-STD-1760 lanyard release plugs, in accordance with the definition of BUS 1553 B standards in N coding (arrangement 25-20) and in A coding (arrangement 25-11) Refer to pages 7 to 8 - insert arrangements marked with*** Other shell sizes and insert arrangements are also available in the MIL-DTL-38999 standard version. Please refer to pages 6 to 8 and consult us for further information. Main characteristics * Lanyard release plugs mate with standard TV receptacles, JD38999/20 and /24 types * They accept MIL-C-85049 accessories * They are 100% scoop-proof * Applications: - Quick disconnect - Weapon systems - Ejector seats Overall dimensions Lanyard release plugs - MIL-STD-1760 Low profile version (ordering information on page 30) TVFBRW JD38999/31W Lanyard release plugs - MIL-STD-1760 O42.5 MAX ACCESSORY 58.5 MAX 3.2 MAX 6.3 RAD 51 MAX 7.11 MAX 42.4 MAX LENGTH "X" See chart A CHART A Length "X" MIL.STD 1760 coding mm D E F G H J K M X 140 153 166 178 191 407 229 254 432 Other lengths are also available under TVFBRW proprietary designation. Consult us. 22 Page 25 Lanyard release plugs Standard version (ordering information page 31) 9.12 Max 9.50 Max 885565...P 915565...P 885565...S 915565...S JD38999/29W JD38999/29F JD38999/30W JD38999/30F D O 12.70 0.79 B CHART I Arrangement code 23 Blue band 45.24 Max 60.33 Max Length X See chart II Metric V Thread LANYARD RELEASE PLUGS 20/12/01 16:41 CHART II Insert arrangement 04 11-4 06 11-35 07 11-98 Shell size MIL-DTL-38999 Series III metric V thread Amphenol B Max (mm) D Max (mm) B 11 M15x1.0-6g 46.89 28.17 13 M18x1.0-6g 50.09 31.75 10 13-4 C 11 13-8 D 15 M22x1.0-6g 52.81 34.93 13 13-98 E 17 M25x1.0-6g 56.01 38.10 14 13-35 F 19 M28x1.0-6g 58.45 41.28 18 15-5 G 21 M31x1.0-6g 62.79 44.45 19 15-19 H 23 M34x1.0-6g 65.89 47.63 20 15-35 27 17-6 J 25 M37x1.0-6g 68.71 50.08 28 17-8 29 17-26 30 17-35 31 17-99 37 19-11 38 19-28 39 19-32 40 19-35 47 21-11 48 21-16 49 21-35 50 21-41 51 21-39 57 23-21 58 23-35 59 23-53 66 25-19 67 25-29 68 25-35 69 25-43 70 25-61 71 25-4 72 25-24 CHART III Length "X" (mm) Code MS/Amphenol 102 A 115 B 127 C 140 D 153 E 166 F 178 G 191 H 203 I 216 J 229 K 242 L 254 M 267 N 280 P 293 R 305 S 318 T 331 U 356 V 381 W 407 X 432 Y 458 Z TV-CTV TV CTV - E113/D ACCESSORIES TV CTV - E113/D 20/12/01 16:41 Page 26 Protection caps 29.62 MAX 20.24 MAX A A Protection cap for receptacles equipped with metallic chain or nylon cord (for shell types: P00,07) B Protection cap for plugs equipped with metallic chain or nylon cord (for shell type: 06) N 4.1 +0.1 Termination of the chain or cord for jam nut receptacle protection caps (for shell type: 07) 4.1 +0.1 MIL-DTL-38999 Amphenol Series III A B C D E F G H J Socapex 9 11 13 15 17 19 21 23 25 Termination of the chain for square flange receptacle and plug protection caps (for shell types: P00,06) Cord length for plugs: 160 mm Cord length for receptacles: 105 mm Chain length for plugs: 127 mm Chain length for receptacles: 152 mm Termination of the cord for plugs protection caps (for shell type: 06) Shell size Termination of the cord for square flange receptacle protection caps (for shell type: P00) B Dia Max (mm) 22.23 25.40 28.58 31.75 36.53 38.10 41.28 44.45 47.63 A Thread 0.1P-0.3L-TS Class 2B (inches) .6250 .7500 .8750 1.0000 1.1875 1.2500 1.3750 1.5000 1.6250 N Dia Max (mm) 22.73 25.40 29.74 32.99 36.47 39.19 42.42 45.39 48.62 Ordering information CAP Series B EC N TV W 15 Protection cap type EC: For square flange receptacle ER: For jam nut receptacle F: For plug Wire type N: Nylon cord Blank: Metallic chain Connector type Finish B: Bronze F: Electroless nickel plated, aluminium version W: Olive drab cadmium plated, aluminium version Corresponding connector shell size: 09/11/13/15/17/19/21/23/25 For composite or stainless steel caps, please consult us 24 20/12/01 16:41 Page 27 ACCESSORIES TV CTV - E113/D Plastic dust caps For protection during transport and storage, plastic dust caps are available upon request. Standard crimp and PCB contacts Version Contact Size 8 (coax)* 8 (power) Standard PCB 10 (power) 12 (coax) 12 16 (coax) 16 20 22D 12 16 20 22 Pin contacts Proprietary No 900130 900197 900198-91** 900006 900340 900005 900132 900000 900001 900004 900238-91 900240-91 900241 900245-91 Socket contacts Proprietary No Military No 900140 M39029/59-366 Military No M39029/60-367 - 900217 - M39029/28-211 M39029/58-365 M39029/76-424 M39029/58-364 M39029/58-363 M39029/58-360 - 900046 900350 900045 900142 900040 900041 900044 900263 900251 900256 M39029/75-416 M39029/56-353 M39029/77-428 M39029/56-352 M39029/56-351 M39029/56-348 - Above part numbers include standard 500 - cycle finish designation - gold plating over suitable underplate in accordance with MIL-C-39029. * For use with RG180B/U and RG195A/U cable. For other size 8, 12 and 16 coaxial contacts please refer to data sheet E114. ** For arrangement 21-48 only For other contacts (coaxial, triaxial, optical termini, PCB, thermocouple), please refer to data sheet E114 For details regarding size 8 piggy back grommets range, please refer to data sheet E114 Contact Size Proprietary No Military No 8 (Coax) 8 (Power) 10 (Power) 12 16 20 22D 900024 900029 10.576225 900023 900020 900021 900022 NA NA NA MS27488-12 MS27488-16 MS27488-20 MS27488-22 Holding support equipped with olive drab cadmium dummy receptacles Size 25 receptacle all codings Size 23 receptacle all codings Size 21 receptacle all codings Size 19 receptacle all codings Size 17 receptacle all codings Size 15 receptacle all codings Size 13 receptacle all codings Size 11 receptacle all codings Size 9 receptacle A, B, D codings Size 9 receptacle N, C, E codings Amphenol Socapex reference: 809 931 Torque value for rear accessories 25 For metallic accessories on metallic shells only. For composite, please consult us. Shell Size Max. torque value N.m Shell Size Max. torque value N.m 9 11.30 19 22.60 11 11.30 21 28.30 13 17.00 23 28.30 15 22.60 25 28.30 17 22.60 TV-CTV Sealing plugs TOOLING TV CTV - E113/D 20/12/01 16:41 Page 28 Crimping tools Contact size 8 coax 8 power 10 power 12 coax 12 16 coax 16 Contact part number Proprietary No Military No Inner pin & socket Outer pin & socket 900 198/91 900 197 900 217 900 006 900 046 Inner pin & socket Outer pin & socket 900 005 M39029/58-365 900 045 M39029/56-353 Inner pin & socket Outer pin & socket 900 000 M39029/58-364 900 040 M39029/56-352 900 001 M39029/58-363 20 22D 900 041 M39029/56-351 900 004 900 044 M39029/58-360 M39029/56-348 Crimping tool Proprietary No Military No 809 801 M22520/2-01 809 914 M22520/5-01 809 872 809 872 809 872 - 809 801 809 926 809 857 809 857 809 801 809 863 809 857 809 857 809 857 809 801 809 857 809 801 809 801 809 801 Positioner Proprietary No Military No M22520/2-31 809 915 M22520/5-41 809 873 809 873 809 873 - M22520/2-01 M22520/31-01 M22520/1-01 M22520/1-01 M22520/2-01 M22520/4-01 M22520/1-01 M22520/1-01 M22520/1-01 M22520/2-01 M22520/1-01 M22520/2-01 M22520/2-01 M22520/2-01 809 932 809 927 809 858 809 858 809 862 809 864 809 858 809 858 809 858 809 826 809 858 809 826 809 810 809 835 M22520/2-34 M22520/31-02 M22520/1-04 M22520/1-04 M22520/2-35 M22520/4-02 M22520/1-04 M22520/1-04 M22520/1-04 M22520/2-10 M22520/1-04 M22520/2-10 M22520/2-09 M22520/2-07 Insertion and removal tools Plastic tools Contact Size Proprietary No Military No 8 power 10 power 12 16 20 22D * 809 859 809 855 809 854 809 856 * M81969/14-05 M81969/14-04 M81969/14-03 M81969/14-10 M81969/14-01 Insertion tools Removal tools Proprietary No 809 859 809 855 809 854 809 856 Military No M81969/14-05 M81969/14-04 M81969/14-03 M81969/14-10 M81969/14-01 * Manual insertion Metallic tools Straight type Contact size 8 power/coax 10 power 12 16 20 22D Insertion tools Removal tools Proprietary No Proprietary No 809 961 809 846 809 847 809 849 * 809 816 809 817 809 819 Angle type Insertion tools Proprietary No Military No * 809 838 809 812 809 813 809 815 * M81969/8-11 M81969/8-09 M81969/8-07 M81969/8-05 M81969/8-01 * Manual insertion Note: For lanyard release plugs, only use straight removal tools. Removal tools Proprietary No 809 845 809 839 809 820 809 821 809 823 Military No M81969/8-12 M81969/8-10 M81969/8-08 M81969/8-06 M81969/8-02 26 20/12/01 16:41 Page 29 Amphenol designation - Composite and metallic versions Series TV PS00 RF TV: Metallic shell CTV: Composite shell Shell type Square flange receptacle: 175C (O.D. cadmium): P00 200C (nickel): PS00 Jam nut receptacle: 175C (O.D. cadmium): 07 200C (nickel): S07 Straight plug: 175C (O.D. cadmium): 06 200C (nickel): S06 23 53 P A - - ORDERING INFORMATION TV CTV - E113/D Shell material, finish and contact type Composite See pages 11 and 12 RW: Olive drab cadmium plated 175C, crimp contacts WCI: Olive drab cadmium plated 175C, PCB contacts WDW: Olive drab cadmium plated 175C, wire-wrap contacts* RF: Electroless nickel plated 200C, crimp contacts FCI: Electroless nickel plated 200C, PCB contacts FDW: Electroless nickel plated 200C , wire-wrap contacts* Aluminium See pages 13 to 15 RW: Olive drab cadmium plated 175C, crimp contacts WCI: Olive drab cadmium plated 175C, PCB contacts WDW: Olive drab cadmium plated 175C, wire-wrap contacts* RF: Electroless nickel plated 200C, crimp contacts FCI: Electroless nickel plated 200C, PCB contacts FDW: Electroless nickel plated 200C, wire-wrap contacts* Stainless steel See pages 13 to 15 RK: Passivated 200C, firewall capability, crimp contacts KCI: Passivated 200C, firewall capability, PCB contacts KDW: Passivated 200C, firewall capability, wire-wrap contacts* RS: Nickel plated 200C, firewall capability, crimp contacts SCI: Nickel plated 200C, firewall capability, PCB contacts SDW: Nickel plated 200C firewall capability, wire-wrap contacts* Bronze See pages 13 to 15 RB: 200C, crimp contacts BCI: 200C, PCB contacts BDW: 200C, wire-wrap contacts* Shell size 09/11/13/15/17/19/21/23/25 Contact arrangement See pages 6 to 8 Contact type Polarization Blank for normal or A, B, C, D, E. See coding system on page 10 Contacts Blank: Connector delivered with contacts LC: Connector delivered without contacts Deviation F404: Tinned PCB contacts W88 (for TVS06 RB only): Coupling nut conforms to CECC75 - 201 - 002A For other deviations (FXXX), please consult us. * For information on wire wrap contacts, please refer to data sheet E114. 27 TV-CTV P: Pin (500 cycles) S: Socket (500 cycles) H: Pin (1500 cycles - CTV only) J: Socket (1500 cycles - CTV only) ORDERING INFORMATION TV CTV - E113/D 20/12/01 16:41 Page 30 Military designation - Composite and metallic versions Series JD38999/ 20 F H 53 P A Shell type 20: Square flange receptacle 24: Jam nut receptacle 26: Straight plug Shell material and finish Composite J: Olive drab cadmium plated 175C M: Electroless nickel plated 200C Aluminium W: Olive drab cadmium plated 175C F: Electroless nickel plated 200C Stainless steel K: Passivated 200C, firewall capability S: Nickel plated 200C, firewall capability Shell size A B C D E F G H J 09 11 13 15 17 19 21 23 25 MIL Amphenol Contact arrangement See pages 6 to 8 Contact and connector type A: Without pin contact B: Without socket contact P: With pin contacts S: With socket contacts Polarization: N for normal or A, B, C, D, E. See coding system on page 10 Amphenol designation - Data bus "Ground Plane" receptacle Series CTV P 00 RG W 15 05 P - LC CTV: Composite shell (for TV metallic shell, please consult us) Shell type Square flange receptacle: 175C (O.D. cadmium): P 00 Jam nut receptacle: 175C (O.D. cadmium): 07 200C (nickel): PS00 200C (nickel): S07 Insert type RG: conductive insert Shell finish W: Olive drab cadmium plated 175C F: Electroless nickel plated 200C Shell size* 09/11/13/15/17/21/23/25 Contact arrangement See page 19 Contact type P: Pin S: Socket Polarization Blank for normal or A,B. See coding system on page 10 Contacts LC: Connector delivered without contact. For other arrangement, shell, coding or deviation, please consult us * Shell size 9, available in aluminium (TV version) only. 28 20/12/01 16:41 Page 31 Amphenol designation - Hermetic versions Series TV SI YN 11 35 P - B 35 P N Shell type PS02: Square flange receptacle S07: Jam nut receptacle SI: Solder mounting receptacle Shell material and finish Y: Stainless steel passivated YN: Stainless steel nickel plated ORDERING INFORMATION TV CTV - E113/D Shell size: 09/11/13/15/17/19/21/23/25 Contact arrangement See pages 6 to 8 (insert arrangements marked with "Y") Contact type P: Pin Polarization Blank for normal or A, B, C, D, E. See coding system on page 10. Military designation - Hermetic versions Connector type JD38999/ 25 N Shell type 21: Square flange receptacle 23: Jam nut receptacle 25: Solder mounting receptacle Shell material and finish Y: Stainless steel passivated N: Stainless steel nickel plated Shell size A B C D E F G H J 09 11 13 15 17 19 21 23 25 MIL Amphenol Contact arrangement Contact type P: Pin. Polarization: N for normal or A, B, C, D, E. See coding system on page 10 29 TV-CTV See pages 6 to 8 (insert arrangements marked with "Y") ORDERING INFORMATION TV CTV - E113/D 20/12/01 16:41 Page 32 Amphenol designation - MIL-STD-1760 lanyard release plugs Low profile version Series TV FB RW P 25-11 E FB: MIL-STD-1760 lanyard release plug RW: Olive drab cadmium plated Arrangement 25-11, 25-20: see pages 6 to 8 Contact type and polarization G: 25-11 arrangement, pin contacts only (see "polarization chart" on page 31) P: 25-20 arrangement, pin contacts only (see "polarization chart" on page 31) Lanyard length D: 140 mm E: 153 mm F: 166 mm G: 178 mm H: 191 mm K: 229 mm M: 254 mm J: 407 mm X: 432 mm Other lengths are available upon request Military designation - MIL-STD-1760 lanyard release plugs Low profile version Series JD38999/ 31 W E 11 N 1 Shell and contact type 31: Plug with pin contacts, per MIL-STD-1760 Shell finish W: Olive drab cadmium plated 175C Lanyard length D: 140 mm E: 153 mm F: 166 mm G: 178 mm H: 191 mm K: 229 mm M: 254 mm J: 407 mm X: 432 mm Contact arrangement 11: 25-11 arrangement 20: 25-20 arrangement Polarization: N for 25-20 arrangement. See coding on page 10 A for 25-11 arrangement. Plug locking ring type 1: O 51mm (low profile) 2: O 68mm (please consult us) 30 20/12/01 16:41 Page 33 Amphenol designation - Lanyard release plugs Standard version Shell finish 88 5565 20 K P 88: Olive-drab cadmium plated 91: Nickel plated Connector type Shell size and arrangement code ORDERING INFORMATION TV CTV - E113/D See chart I on page 23 Others, please consult us Lanyard length A to Z code (see chart III on page 23) Contact type and polarization See chart below Polarization MS code Socket contact code Amphenol MS code Pin contact code Amphenol SN S (normal) PN P (normal) SA H PA G SB J PB I SC L PC K SD N PD M SE T PE R Military designation - Lanyard release plugs Standard version Connector type JD38999/ 29 W D 35 E N Shell and contact type TV-CTV 29: Plug with pin contacts 30: Plug with socket contacts Shell finish W: Olive drab cadmium plated F: Nickel plated Shell size A* B C D E F G H J 09* 11 13 15 17 19 21 23 25 * Please consult us MIL Amphenol Contact arrangement See chart I on page 23 Lanyard length 31 A to Z code (see chart III on page 23) Polarization N for normal or A, B, C, D, E. See coding on page 10 SHELL MATERIAL MIL-DTL-38999 Series III JD38999/20J X XX A AMPHENOL CTVP00RW ## P ^ LC CTVP00WCI ## P ^ LC CTVP00WDW ## P ^ LC JD38999/20M X XX A CTVPS00RF ## P ^ LC CTVPS00FCI ## P ^ LC CTVPS00FDW ## P ^ LC JD38999/24J X XX A CTV07RW ## P ^ LC Composite shell CTV07WCI ## P ^ LC CTV07WDW ## P ^ LC JD38999/24M X XX A CTVS07RF ## P ^ LC CTVS07FCI ## P ^ LC CTVS07FDW ## P ^ LC JD38999/26J X XX A CTV06RW ## P ^ LC JD38999/26M X XX A CTVS06RF ## P ^ LC JD38999/20W X XX A TVP00RW ## P ^ LC TVP00WCI ## P ^ LC TVP00WDW ## P ^ LC JD38999/20F X XX A TVPS00RF ## P ^ LC TVPS00FCI ## P ^ LC TVPS00FDW ## P ^ LC JD38999/24W X XX A TV07RW ## P ^ LC Aluminium shell TV07WCI ## P ^ LC TV07WDW ## P ^ LC JD38999/24F X XX A TVS07RF ## P ^ LC TVS07FCI ## P ^ LC TVS07FDW ## P ^ LC JD38999/26W X XX A TV06RW ## P ^ LC JD38999/26F X XX A TVS06RF ## P ^ LC JD38999/20K X XX A TVPS00RK ## P ^ LC TVPS00KCI ## P ^ LC TVPS00KDW ## P ^ LC JD38999/20S X XX A TVPS00RS ## P ^ LC TVPS00SCI ## P ^ LC TVPS00SDW ## P ^ LC JD38999/24K X XX A TVS07RK ## P ^ LC Stainless steel shell TVS07KCI ## P ^ LC TVS07KDW ## P ^ LC JD38999/24S X XX A TVS07RS ## P ^ LC TVS07SCI ## P ^ LC TVS07SDW ## P ^ LC JD38999/26K X XX A TVS06RK ## P ^ LC JD38999/26S X XX A TVS06RS ## P ^ LC TVPS00RB ## P ^ TVPS00BCI ## P ^ TVPS00BDW ## P ^ Aluminium bronze shell TVS07RB ## P ^ TVS07BCI ## P ^ TVS07BDW ## P ^ JD38999/21Y X XX P TVPS02Y ## P ^ JD38999/21N X XX P TVPS02YN ## P ^ JD38999/23Y X XX P TVS07Y ## P ^ Hermetic receptacles JD38999/23N X XX P TVS07YN ## P ^ JD38999/25Y X XX P TVSIY ## P ^ JD38999/25N X XX P TVSIYN ## P ^ As example, male version without contact (except for bronze and hermetic male versions with contacts). CAPTION Shell size Insert arrangement Polarization, rotation of secondary keyways MIL-DTL-38999 Series III P/N X XX Do not hesitate to contact us for further information AMPHENOLP/N ## ^ A mphenol Amphenol Socapex Mil/Aero & Industrial Business Unit 948, Promenade de l'Arve - BP 29 F - 74311 Thyez Cedex Tel.: +33 (0)4 50 89 28 00 - Fax: +33 (0)4 50 96 19 41 http://www.amphenol-socapex.com Sales office in Paris Tel.: +33 (0)1 49 05 30 00 - Fax: +33 (0)1 49 05 30 43 Mediasquare +33 (0) 1 46 31 36 36 Page 2 The information given in this document is as a guideline only. We reserve the right to modify our products in any way we deem necessary. Any duplication is prohibited, unless approved in writing. 20/12/01 16:41 E113/C CROSS REFERENCES TV CTV - E113/D 32