HMHAA280 AC Input, Half Pitch Mini-Flat Package 4-Pin Optocoupler Features Description Compact 4-pin package (2.4mm maximum standoff The HMHAA280 series consists of two gallium arsenide infrared emitting diodes, connected in inverse parallel, driving a single silicon phototransistor in a compact 4-pin mini-flat package. The lead pitch is 1.27mm. height) Half pitch leads for optimum board space savings Current Transfer Ratio: 50-600% Available in tape and reel quantities of 2500 CSA (File #1201524), UL (File #E90700) and VDE (File #136480) certified Applications AC line monitor Unknown polarity DC sensor Telephone line receiver Package Dimensions PIN 1 0.050 (1.27) 0.020 (0.51) 0.012 (0.30) 0.287 (7.29) 0.248 (6.30) 0.106 (2.69) 0.091 (2.31) 0.173 (4.40) TYP 0.094 (2.39) 0.079 (2.01) 0.035 (0.89) 0.012 (0.30) 0.008 (0.20) 0.000 (0.0) 0.030 (0.75) 0.022 (0.55) 1 4 COLLECTOR 2 3 EMITTER Equivalent Circuit Note: All dimensions are in inches (millimeters) (c)2011 Fairchild Semiconductor Corporation HMHAA280 Rev. 1.1.1 www.fairchildsemi.com HMHAA280 -- AC Input, Half Pitch Mini-Flat Package 4-Pin Optocoupler April 2011 Symbol Parameter Value Units TOTAL PACKAGE TSTG Storage Temperature -55 to +125 C TOPR Operating Temperature -55 to +100 C EMITTER IF (avg) Continuous Forward Current 50 mA IF (pk) Peak Forward Current (1s pulse, 300pps.) 1 A VR Reverse Input Voltage 6 V PD Power Dissipation 60 mW 0.6 mW/C Continuous Collector Current 50 mA Power Dissipation 150 mW 1.5 mW/C Derate linearly (above 25C) DETECTOR PD Derate linearly (above 25C) VCEO Collector-Emitter Voltage 80 V VECO Emitter-Collector Voltage 7 V (c)2011 Fairchild Semiconductor Corporation HMHAA280 Rev. 1.1.1 www.fairchildsemi.com 2 HMHAA280 -- AC Input, Half Pitch Mini-Flat Package 4-Pin Optocoupler Absolute Maximum Ratings (TA = 25C unless otherwise specified) Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. Symbol Parameter Test Conditions Min. Typ.* Max. Unit 1.4 V 5 A INDIVIDUAL COMPONENT CHARACTERISTICS Emitter VF Forward Voltage IF = 5mA IR Reverse Current VR = 5V BVCEO Breakdown Voltage Collector to Emitter IC = 0.5mA, IF = 0 80 BVECO Emitter to Collector IE = 100A, IF = 0 7 ICEO Collector Dark Current VCE = 80V, IF = 0 CCE Capacitance VCE = 0V, f = 1MHz Detector V 100 10 nA pF TRANSFER CHARACTERISTICS CTR DC Current Transfer Ratio IF = 5mA, VCE = 5V 50 600 CTR Symmetry IF = 5mA, VCE = 5V 0.33 3.0 Saturation Voltage IF = 8mA, IC = 2.4mA tr Rise Time (Non-Saturated) IC = 2mA, VCE = 5V, RL = 100 3 tf Fall Time (Non-Saturated) IC = 2mA, VCE = 5V, RL = 100 3 VCE (SAT) 0.4 % V s ISOLATION CHARACTERISTICS VISO Steady State Isolation Voltage 1 Minute 3750 VRMS *All typicals at TA = 25C (c)2011 Fairchild Semiconductor Corporation HMHAA280 Rev. 1.1.1 www.fairchildsemi.com 3 HMHAA280 -- AC Input, Half Pitch Mini-Flat Package 4-Pin Optocoupler Electrical Characteristics (TA = 25C) Fig. 1 Forward Current vs. Forward Voltage Fig. 2 Collector Current vs. Forward Current 100 100 VCE = 10 V IC - COLLECTOR CURRENT (mA) IF - FORWARD CURRENT (mA) TA = 25C 10 VCE = 5 V 10 VCE = 0.4 V 1 0.1 1 0.6 0.8 1.0 1.2 1.4 1 1.6 10 VF - FORWARD VOLTAGE (V) Fig. 3 Current Transfer Ratio vs. Forward Current Fig. 4 Normalized CTR vs. Temperature 2.0 1000 TA = 25C NORMALIZED CTR (IF) / CTR (5mA) IC /IF - CURRENT TRANSFER RATIO (%) 100 IF - FORWARD CURRENT (mA) VCE = 10 V VCE = 5 V 100 VCE = 0.4 V Normalized to: IF = 5 mA VCE = 5 V TA = 25C 1.5 IF = 5 mA 1.0 IF = 10 mA IF = 1 mA 0.5 IF = 0.5mA 0.0 -0.5 10 1 10 -40 100 -20 IF - FORWARD CURRENT (mA) 0 20 40 60 80 100 TA - AMBIENT TEMPERATURE (C) Fig. 5 Collector Current vs. Temperature 100 IC - COLLECTOR CURRENT (mA) VCE = 5 V IF = 25 mA 10 IF = 10 mA IF = 5 mA IF = 1 mA 1 IF = 0.5 mA 0.1 -40 -20 0 20 40 60 80 100 TA - AMBIENT TEMPERATURE (C) (c)2011 Fairchild Semiconductor Corporation HMHAA280 Rev. 1.1.1 www.fairchildsemi.com 4 HMHAA280 -- AC Input, Half Pitch Mini-Flat Package 4-Pin Optocoupler Typical Performance Characteristics Fig. 6 Collector Current vs. Collector-Emitter Voltage Fig. 7 Collector Current vs. Collector-Emitter Voltage 50 18 40 IC - COLLECTOR CURRENT (mA) IC - COLLECTOR CURRENT (mA) TA = 25C IF = 50 mA IF = 40 mA IF = 30 mA 30 IF = 20 mA IF = 10 mA 20 IF = 5.0 mA 10 16 IF = 50 mA IF = 40 mA 14 IF = 30 mA 12 IF = 20 mA 10 8 IF = 10 mA 6 IF = 5 mA 4 IF = 2 mA 2 IF = 0.5 mA IF = 1.0 mA 0 0 1 2 3 4 5 6 7 8 9 0 0.0 10 0.2 VCE - COLLECTOR-EMITTER VOLTAGE (V) 0.6 0.8 1.0 VCE - COLLECTOR-EMITTER VOLTAGE (V) Fig. 8 Collector Dark Current vs. Temperature Fig. 9 Switching Time vs. Load Resistance 1000 10 SWITCHING TIME (s) ICEO - COLLECTOR DARK CURRENT (A) 0.4 IF = 1.0 mA 1 VCE = 48 V VCE = 24 V 0.1 VCE = 10 V 0.01 TA = 25C IF = 16 mA VCC = 5 V tOFF 100 tS 10 1 VCE = 5 V tON 0.1 0.001 0 20 40 60 80 100 1 10 VCE(SAT) - COLLECTOR-EMITTER SATURATION VOLTAGE (V) TA - AMBIENT TEMPERATURE (C) (c)2011 Fairchild Semiconductor Corporation HMHAA280 Rev. 1.1.1 100 RL - LOAD RESISTANCE (K) Fig. 10 Collector-Emitter Saturation Voltage vs. Temperature 0.30 IF = 5 mA IC = 1 mA 0.28 0.26 0.24 0.22 0.20 0.18 0.16 0.14 0.12 0.10 -40 -20 0 20 40 60 80 100 TA - AMBIENT TEMPERATURE (C) www.fairchildsemi.com 5 HMHAA280 -- AC Input, Half Pitch Mini-Flat Package 4-Pin Optocoupler Typical Performance Characteristics (Continued) HMHAA280 -- AC Input, Half Pitch Mini-Flat Package 4-Pin Optocoupler Ordering Information Option Description V VDE Approved R2 Tape and Reel (2500 units) R2V Tape and Reel (2500 units) and VDE Approved Marking Information 1 280 2 V X YY M1 6 3 4 5 Definitions 1 Fairchild logo 2 Device number 3 VDE mark (Note: Only appears on parts ordered with VDE option - See order entry table) 4 One digit year code 5 Two digit work week ranging from `01' to `53' 6 Assembly package code (c)2011 Fairchild Semiconductor Corporation HMHAA280 Rev. 1.1.1 www.fairchildsemi.com 6 K0 P2 P0 t D0 E A0 W1 W B0 d F D1 P 1.27 Pitch Symbol Dimensions (mm) Tape Width W 12.00 +0.30 / -0.10 Tape Thickness t Sprocket Hole Pitch P0 4.00 0.10 Sprocket Hole Diameter D0 1.50 +0.10 / -0.0 Sprocket Hole Location E 1.75 0.10 Pocket Location F 5.50 0.10 P2 2.00 0.10 Pocket Pitch P 8.00 0.10 Pocket Dimension A0 2.80 0.10 B0 7.30 0.10 K0 2.30 0.10 D1 1.50 Min. Description Pocket Hole Diameter Cover Tape Width W1 Cover Tape Thickness d Max. Component Rotation or Tilt 9.20 0.065 0.010 10 Max. Devices Per Reel 2500 Reel Diameter (c)2011 Fairchild Semiconductor Corporation HMHAA280 Rev. 1.1.1 0.30 0.05 330mm (13") www.fairchildsemi.com 7 HMHAA280 -- AC Input, Half Pitch Mini-Flat Package 4-Pin Optocoupler Tape and Reel Dimensions 0.024 (0.61) 0.060 (1.52) 0.310 (7.87) 0.190 (4.83) 0.050 (1.27) Reflow Profile0 Package Surface Temperature T (C) (Heating) to 30 s 230C (peak temperature) 210C 180C to 60 s 150 s 90 s 80 s Time (s) * Peak reflow temperature: 230C (package surface temperature) for 30 seconds * Time of temperature higher than 210C: 60 seconds or less * One time soldering reflow is recommended (c)2011 Fairchild Semiconductor Corporation HMHAA280 Rev. 1.1.1 www.fairchildsemi.com 8 HMHAA280 -- AC Input, Half Pitch Mini-Flat Package 4-Pin Optocoupler Footprint Drawing for PCB Layout TRADEMARKS The following includes registered and unregistered trademarks and service marks, owned by Fairchild Semiconductor and/or its global subsidiaries, and is not intended to be an exhaustive list of all such trademarks. AccuPower Auto-SPM AX-CAP* BitSiC(R) Build it Now CorePLUS CorePOWER CROSSVOLT CTL Current Transfer Logic DEUXPEED(R) Dual CoolTM EcoSPARK(R) EfficientMax ESBC (R) Fairchild(R) Fairchild Semiconductor(R) FACT Quiet Series FACT(R) FAST(R) FastvCore FETBench FlashWriter(R)* FPS F-PFS FRFET(R) SM Global Power Resource Green FPS Green FPS e-Series Gmax GTO IntelliMAX ISOPLANAR MegaBuck MICROCOUPLER MicroFET MicroPak MicroPak2 MillerDrive MotionMax Motion-SPM mWSaver OptoHiT OPTOLOGIC(R) OPTOPLANAR(R) (R) Power-SPM PowerTrench(R) PowerXSTM Programmable Active Droop QFET(R) QS Quiet Series RapidConfigure Saving our world, 1mW/W/kW at a timeTM SignalWise SmartMax SMART START SPM(R) STEALTH SuperFET(R) SuperSOT-3 SuperSOT-6 SuperSOT-8 SupreMOS(R) SyncFET Sync-LockTM (R) * PDP SPM * Trademarks of System General Corporation, used under license by Fairchild Semiconductor. The Power Franchise(R) The Right Technology for Your SuccessTM TinyBoost TinyBuck TinyCalc TinyLogic(R) TINYOPTO TinyPower TinyPWM TinyWire TranSiC(R) TriFault Detect TRUECURRENT(R)* SerDes UHC(R) Ultra FRFET UniFET VCX VisualMax XSTM DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION, OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD'S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS. LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) 2. A critical component in any component of a life support, device, or are intended for surgical implant into the body or (b) support or system whose failure to perform can be reasonably expected to sustain life, and (c) whose failure to perform when properly used in cause the failure of the life support device or system, or to affect its accordance with instructions for use provided in the labeling, can be safety or effectiveness. reasonably expected to result in a significant injury of the user. ANTI-COUNTERFEITING POLICY Fairchild Semiconductor Corporation's Anti-Counterfeiting Policy. Fairchild's Anti-Counterfeiting Policy is also stated on our external website, www.fairchildsemi.com, under Sales Support. Counterfeiting of semiconductor parts is a growing problem in the industry. All manufacturers of semiconductor products are experiencing counterfeiting of their parts. Customers who inadvertently purchase counterfeit parts experience many problems such as loss of brand reputation, substandard performance, failed applications, and increased cost of production and manufacturing delays. Fairchild is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. Fairchild strongly encourages customers to purchase Fairchild parts either directly from Fairchild or from Authorized Fairchild Distributors who are listed by country on our web page cited above. Products customers buy either from Fairchild directly or from Authorized Fairchild Distributors are genuine parts, have full traceability, meet Fairchild's quality standards for handling and storage and provide access to Fairchild's full range of up-to-date technical and product information. Fairchild and our Authorized Distributors will stand behind all warranties and will appropriately address any warranty issues that may arise. Fairchild will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. Fairchild is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Advance Information Product Status Formative / In Design Preliminary First Production No Identification Needed Full Production Obsolete Not In Production Definition Datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Datasheet contains preliminary data; supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. Datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve the design. Datasheet contains specifications on a product that is discontinued by Fairchild Semiconductor. The datasheet is for reference information only. Rev. I54 (c) Fairchild Semiconductor Corporation www.fairchildsemi.com