High-Speed DIO PCIe-7350 50 MHz 32-CH High-Speed Digital I/O Card Specifications Terminal Boards & Cables DIN-68H-01 Terminal Board with One 68-pin SCSI-VHDCI Connector and 0 or 50 Jumper Selectable Impedance (Cables are not included. Digital I/O Number of channels: 32, per group (8-channel) input/output direction selectable Logic levels: 1.8 V, 2.5 V, 3.3 V (software selectable) Power-up status: All digital inputs Impedance: 68-pin SCSI-VHDCI Cable with 50 Impedance SMB-SMB-1M * Input: 10 k SMB to SMB Cable, 1M * Output: 50 * For more information about mating cables, please refer to P3-48/49. Input protection: -1 to 6 V Data transfer: Programmable I/O, bus-mastering DMA with scatter-gather Features x1 lane PCI Express(R) Interface Maximum 50 MHz clock rate from internal timer or 100 MHz from external clock 200 MB/s maximum throughput Software selectable voltage level of 1.8 V, 2.5 V, and 3.3 V 16-steps phase shift in external clock mode Per group (8-Bit) input/output direction selectable Supports I2C and SPI programmable serial interfaces for external device communication Scatter-gather DMA support Flexible handshaking and external digital trigger modes 8-channel auxiliary programmable I/O Supported Operating System * Windows 7/8 x64/x86, Linux Driver and SDK * LabVIEW, MATLAB, C/C++, Visual Basic, Visual Studio.NET Maximum data transfer rate: 200 MB/s Digital logic levels: Logic Levels Digital Input Digital Output ACL-10279 Ordering Information 1.8 V 2.5 V 3.3 V Min. input high voltage 1.2 V 1.6 V 2V Max. input low voltage 0.63 V 0.7 V 0.8 V Min. output high voltage 1.6 V 2.3 V 3.1 V Max. output low voltage 0.2 V 0.2 V 0.2 V Max. output driving current 8 mA 16 mA 32 mA PCIe-7350 50 MHz 32-CH High-Speed Digital I/O PCI Express(R) Card Clocking mode Internal clock: Max. 50 MHz (100 MHz / N; 2<N<65535) External clock: Max. 100 MHz (support 8/16-Bit data width only, data throughput must be less than 200 MB/s) Handshaking Burst handshaking Trigger sources Software trigger External digital trigger: AFI[0...7] Trigger modes Post trigger, Retrigger, Pattern match, Handshaking Change of State Interrupt Interrupt sources: Any of 32 channels or a pre-define channel Change-of-State Application Function I/O Number of channels: 8 Supporting modes: static I/O, I2C or SPI master node, external clock input/output, external digital trigger input, handshaking Updated September 23, 2014. (c)2014 ADLINK Technology, Inc. All Rights Reserved. All specifications are subject to change without further notice. www.adlinktech.com 3-34 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: ADLINK Technology: PCIe-7350