Printers
Scanners and Imagers
Laser Marking Systems
Ribbons
Software
Application Systems
1
Heat Shrink/Cable Markers
Performance Labels
Self-Laminating Labels
Pre-Printed Wire and Cable Markers
RFID
Pre-Print Services
Permark®
Rail — Signal Products
Tube and Pipe ID Labels
Product Code Cross Reference
Thermal Transfer Labels
Dot Matrix Labels
Laser Labels
CONTENTS
Printer/Material/Ribbon Cross Reference 180
Master Material Specification Chart 182
Industry Icon Key 186
Part Number Index 187
REFERENCE
LABEL ID PRODUCTS 86
HARDWARE/SOFTWARE 134
SPECIALTY PRODUCTS 164
WIRE AND HARNESS ID PRODUCTS 3
NOT the LATEST
REVISION
OBSOLETE
Engineering Notes
2Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
3
Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
TMS-SCE Military Grade Sleeves . . . . . . . .4
HT-SCE High Temperature Sleeves . . . . . .6
HX-SCE Low Fire Hazard Sleeves . . . . . . .8
D-SCE Fluid Resistant Sleeves . . . . . . . . .12
NBC-SCE Nuclear, Biological and Chemical
Resistant Sleeves . . . . . . . . . . . . . . . . . . . . .14
RPS Commercial Grade Sleeves . . . . . . .16
TMS-CCUV UV Resistant Oversleeves . .18
CM-SCE Polyolefin Tags . . . . . . . . . . . . . . .20
HTCM-SCE High Temp Tie-on Tags . . . .22
HLX Low Fire Hazard Tie-on Tags . . . . . .24
HLX-NEL Low Fire Hazard Tie-On Tags .26
HL Tie-On Tags . . . . . . . . . . . . . . . . . . . . . . .28
NMX Flame Retardant
Polyaramid Tags . . . . . . . . . . . . . . . . . . . . . .30
MultiMark . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
iMC Snap-on Cable Clip . . . . . . . . . . . . . . .34
iKC/iKB Tie-On Cable Clip . . . . . . . . . . . . .36
VF/NPVF/VF-130 Polyvinyl Fluoride . .38
RMK-6 Epoxy Coated Polyester . . . . . . .40
RMK Epoxy Coated Polyester . . . . . . . . .42
TTP Polyester . . . . . . . . . . . . . . . . . . . . . . . . .44
HPK Polypropylene . . . . . . . . . . . . . . . . . . .46
SB Thermal Transfer Vinyl . . . . . . . . . . . . .48
SP Self Laminating Polyester . . . . . . . . . .50
PVF Thermal Transfer Polyvinyl
Fluoride . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52
TW Dot Matrix Vinyl . . . . . . . . . . . . . . . . . .54
PV Dot Matrix Polyvinyl Fluoride . . . . . . .56
LSR Polyester Laser Printable . . . . . . . . .58
CSL Polyester Laser Printable . . . . . . . . .60
TKM Self-writable, Self-laminating
Label Booklet . . . . . . . . . . . . . . . . . . . . . . . . .62
Label Dimensions . . . . . . . . . . . . . . . . . . . . .64
TEK Vinyl Fabric Labels . . . . . . . . . . . . . . .66
CMD Label Dispenser . . . . . . . . . . . . . . . . .68
WCD Label Dispenser . . . . . . . . . . . . . . . . .70
K-Type Cable Markers . . . . . . . . . . . . . . . . .72
G-Type Cable Markers . . . . . . . . . . . . . . . . .74
Z-Type Push On Wire Markers . . . . . . . . .76
V-Type Cable Markers . . . . . . . . . . . . . . . . .78
O-Type Cable Markers . . . . . . . . . . . . . . . . .80
Snap On Markers . . . . . . . . . . . . . . . . . . . . .82
CWM Wire Marker Cards . . . . . . . . . . . . .84
Wire and Harness ID Products
HEAT SHRINK/CABLE MARKERS
PERFORMANCE LABELS
SELF-LAMINATING LABELS
PRE-PRINTED WIRE AND CABLE MARKERS
TMS-SCE Military grade heat shrinkable wire identification sleeves
4Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Heat Shrink/Cable Markers
Wire and Harness ID Products
Heat-Shrink/Cable Markers
TMS-SCE marker sleeves are designed to meet the wire and cable
marking needs of manufacturers with high performance
requirements. Made from durable, flame retardant, radiation-
crosslinked heat-shrinkable polyolefin, TMS-SCE marker sleeves
can be used in a wide variety of applications. All TMS-SCE meet the
performance requirements of SAE-ASM-DTL-23053/5 class 1.
TMS-SCE-2X meets all of the requirements of SAE-AMS-DTL-
23053/5 classes 1 and 3. The marks are permanent immediately
after printing and remain legible even when exposed to abrasion,
aggressive cleaning solvents, and military fuels and oils. The
sleeves meet the mark permanence requirements of SAE
AS81531 4.6.2 and MIL-STD-202 both before and after
shrinking.
Both 2:1 and 3:1 shrink ratios are available. The 2:1 products
provide a thick, rugged sleeve wall and are particularly easy to
handle. The lightweight 3:1 products provide extremely fast
shrinking and cover a wider range of wire diameters, thus
simplifying inventory.
The marker sleeves are designed to be printed by computer-driven
dot matrix or thermal transfer printers, providing several
advantages in terms of reduced errors, cycle time and cost.
Supplied in a thin, flat “ladder” format, the sleeves are held
horizontally between two hole-punched polyester strips. This
configuration feeds directly from the storage box into a Tyco
Electronics recommended printer. Tyco Electronics recommended
ribbons should always be used. The ladder format provides
automatic kitting of the marker sleeves in the desired sequence. A
standard heat gun with reflector is used to shrink the sleeves onto
the wire or cable.
Features and benefits
Permanent identification sleeves
Computer-printable
Lightweight for aerospace applications
Military specification material and print performance
2:1 and 3:1 shrink ratio
CSA Certified
UL Recognized, VW all flame tubing test rated
Quick recovery for heat sensitive areas TMS-SCE - 2X -1K-1/8- 2.0-S1-9
Part numbering system
Color (white or yellow)
Scoring (optional)
Sleeve length
(2.0
"
nominal) (omit for 2X)
Inside diameter, as
supplied ( inches)
Standard Pack
(1,000 pieces)
2X is optional (2:1 shrink
ratio: if left out, product
will be 3:1)
Product family
Temperature rating
Operating temperature range 55°C to +135°C –67°F to +275°F
Minimum recovery temperature +85°C +185°F
Maximum storage temperature +40°C +104°F
Specifications/approvals
Tyco Electronics RW 2511
TTDS-023
Military SAE-AMS-DTL-23053/5 class1 and 3 (TMS-SCE-2X)
SAE-AMS-DTL-23053/5 class 1 (TMS-SCE)
SAE AS81531 4.6.2, MIL-STD-202 Method 215J
Industry UL Recognized – Standard 224, file E35586
(TMS-SCE-2X is UL224-VW1 rated. TMS-SCE is UL224-
all tube flame test rated)
CSA Certified – File 31929
Printer information
Tyco Electronics printer
AM6310 (dot matrix)
T200 Series (thermal transfer, low volume)
T312M (thermal transfer)
Tyco Electronics ribbon
1892BK04-RIBBON (dot matrix)
TMS-101-RIBBON-4RPSCE (thermal transfer for T208M)
TMS-RJS-RIBBON-4RPSCE (thermal transfer for T312M))
Heat Shrink/Cable Markers
Wire and Harness ID Products
TMS-SCE Military grade heat shrinkable wire identification sleeves
5
Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Heat-Shrink/Cable Markers
Ordering information
Available sizes and formats
Inside diameter
Ordering Expanded Recovered Recommended Recovered wall
description D (minimum) d (maximum) use range thickness Weight
mm
inches
mm
inches
mm
inches
mm
inches
(g/10 pcs.)
TMS-SCE-1K-3/32-2.0- <color> 2.36 0.093 0.79 0.031 0.81 - 1.90 0.032 - 0.075 0.53 ± 0.08 0.021 ± 0.003 1.50
TMS-SCE-2X-1K-3/32- <color> 2.36 0.093 1.17 0.046 1.27 - 1.90 0.050 - 0.075 0.64 ± 0.08 0.025 ± 0.003 2.04
TMS-SCE-1K-1/8-2.0- <color> 3.18 0.125 1.07 0.042 1.11 - 2.66 0.044 - 0.105 0.58 ± 0.08 0.023 ± 0.003 2.03
TMS-SCE-2X-1K-1/8-<color> 3.18 0.125 1.58 0.062 1.75 - 2.66 0.069 - 0.105 0.64 ± 0.08 0.025 ± 0.003 2.75
TMS-SCE-1K-3/16-2.0- <color> 4.75 0.187 1.57 0.062 1.75 - 4.06 0.069 - 0.160 0.58 ± 0.08 0.023 ± 0.003 2.68
TMS-SCE-2X-1K-3/16-<color> 4.75 0.187 2.36 0.093 2.54 - 4.06 0.100 - 0.160 0.64 ± 0.08 0.025 ± 0.003 3.62
TMS-SCE-1K-1/4-2.0- <color> 6.35 0.250 2.11 0.083 2.31 - 5.46 0.091 - 0.215 0.58 ± 0.08 0.023 ± 0.003 3.51
TMS-SCE-2X-1K-1/4-<color> 6.35 0.250 3.18 0.125 3.81 - 5.46 0.150 - 0.215 0.64 ± 0.08 0.025 ± 0.003 5.94
TMS-SCE-1K-3/8-2.0- <color> 9.53 0.375 3.18 0.125 3.47 - 8.12 0.137 - 0.320 0.61 ± 0.08 0.024 ± 0.003 5.04
TMS-SCE-2X-1K-3/8-<color> 9.53 0.375 4.75 0.187 5.59 - 8.12 0.220 - 0.320 0.64 ± 0.08 0.025 ± 0.003 8.50
TMS-SCE-1K-1/2-2.0- <color> 12.70 0.500 4.22 0.166 4.64 - 10.79 0.183 - 0.425 0.61 ± 0.08 0.024 ± 0.003 6.81
TMS-SCE-2X-1K-1/2-<color> 12.70 0.500 6.35 0.250 6.99 - 10.79 0.275 - 0.425 0.64 ± 0.08 0.025 ± 0.003 11.45
TMS-SCE-1K--3/4-2.0- <color> 19.05 0.750 6.35 0.250 6.99 - 16.25 0.275 - 0.640 0.61 ± 0.08 0.024 ± 0.003 12.03
TMS-SCE-2X-1K-3/4-<color> 19.05 0.750 9.53 0.375 10.16 - 16.25 0.400 - 0.640 0.76 ± 0.08 0.030 ± 0.003 20.63
TMS-SCE-1K-1-2.0- <color> 25.40 1.000 8.46 0.333 9.29 - 21.59 0.366 - 0.850 0.64 ± 0.08 0.025 ± 0.003 15.35
TMS-SCE-1K-11/2-2.0- <color> 38.10 1.500 19.05 0.750 20.95 - 33.02 0.825 - 1.300 0.51 ± 0.08 0.020 ± 0.003 27.51
TMS-SCE-1K-2-2.0- <color> 50.80 2.000 25.40 1.000 27.94 - 44.95 1.100 - 1.750 0.64 ± 0.08 0.025 ± 0.003 47.27
TMS-SCE-1K-21/4-2.0- <color> 57.15 2.250 19.05 0.750 22.32 - 50.80 0.880 - 2.000 0.76 ± 0.08 0.030 ± 0.003 42.06
Total width as supplied 90.18 mm (3.550 inches) including tape and carrier width.
Options
Prescoring Perforated score to produce multiple markers from each sleeve.
Number of prescores 1 prescore 2 prescores 3 prescores
Code S1 S2 S3
Package sizes Standard 1K - 1000-piece packs
Nonstandard Smaller and larger pack sizes are available. Please contact Tyco Electronics.
Colors Standard Yellow White
Code 4 9
Nonstandard Red Pink Orange Green Blue Violet Gray Black
Code 22L3567 80
Note: 3:1 products yellow and white meet the color requirements of MIL-STD-104 class 1. Otherwise colors are pastel for print contrast.
Ordering information: Specify product name, pack size, sleeve size, prescore format, and color.
Ordering example: TMS-SCE-1K-1/8-2.0-S1-9 (scored once)
TMS-SCE-2X only available in white
SOG-ER33-3 BT-M
50mm
(nom)
SOG-ER32-3 BT-M
SOG-ER13-3 BT-M
Dd
HT-SCE High temperature, low outgassing heat-shrinkable wire identification sleeves
6Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Heat-Shrink/Cable Markers
Heat Shrink/Cable Markers
Wire and Harness ID Products
HT-SCE - 1K-1/4-2.0-S1-0
Part numbering system
Color
Scoring (optional)
Sleeve length (inches)
Expanded inside diameter (inches)
Pack size
Product family
HT-SCE wire markers are designed for use in high temperature
applications or where extreme resistance to fuels, lubricants and
cleaning solvents is required. They are also ideal for applications in
which low-vacuum outgassing is of high importance. The marker
sleeves are made of highly flame retardant, heat-shrinkable fluo-
ropolymer tubing.
HT-SCE markers are supplied as a thin, flat “ladder” of sleeves held
horizontally between two polyester strips. This configuration feeds
directly from the storage box into standard Tyco Electronics
recommended printers, with no modifications necessary. A strip of
adhesive tape on each side of the sleeves holds them securely in
place for printing and kitting, yet the sleeves pull easily from the
carrier strips. A standard heat gun with reflector is used to shrink
the sleeves onto the wire or cable to achieve a permanent mark.
After shrinking, HT-SCE markers meet the print performance
requirements of SAE AS81531 4.6.2 and MIL-STD-202. HT-SCE
markers are supplied in boxes of 1000 sleeves and are available
in nine diameter sizes. These cover substrates from 0.8mm to
34.0mm. Because of this versatility, customers need not carry a
large inventory of markers.
Features and benefits
Permanent identification sleeves
High continuous operating temperature
Extreme fluid resistance
Low-vacuum outgassing
Wide range of sleeve sizes for several wire
and bundle diameters
Temperature rating
Operating temperature range 55°C to +225°C –67°F to +437°F
Minimum recovery temperature +200°C +392°F
Maximum storage temperature +40°C +104°F
Specifications/approvals
Tyco Electronics RW 2512
TTDS-020
Military SAE AS 81531 4.6.2
MIL-STD-202 Method 215J
Printer information
Tyco Electronics printer T312M (thermal transfer)
Tyco Electronics ribbon TMS-RJS-RIBBON-4HT (thermal transfer)
Heat Shrink/Cable Markers
Wire and Harness ID Products
HT-SCE High temperature, low outgassing heat-shrinkable wire identification sleeves
7
Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Heat-Shrink/Cable Markers
Ordering information
Available sizes and formats
Inside diameter
Ordering D (min) d (max) Recommended
description As supplied After recovery use range
mm
inches
mm
inches
mm
inches
HT-SCE-1K-3
/32 -2.0- <color> 2.36 0.093 0.79 0.031 0.81 - 1.90 0.032 - 0.075
HT-SCE-1K -1/8-2.0- <color> 3.18 0.125 1.58 0.062 1.75 - 2.66 0.069 - 0.105
HT-SCE-1K-3
/16 -2.0- <color> 4.75 0.187 2.36 0.093 2.54 - 4.06 0.100 - 0.160
HT-SCE-1K-1/4-2.0- <color> 6.35 0.250 3.18 0.125 3.40 - 6.00 0.134 - 0.236
HT-SCE-1K-3/8-2.0- <color> 9.53 0.375 4.75 0.187 5.30 - 8.10 0.209 - 0.319
HT-SCE-1K-1/2-2.0- <color> 12.70 0.500 6.35 0.250 6.60 - 11.40 0.260 - 0.449
HT-SCE-1K-3
/4-2.0- <color> 18.00 0.709 9.00 0.354 9.90 - 15.30 0.390 - 0.602
HT-SCE-1K-1-2.0- <color> 25.40 1.000 12.70 0.500 13.30 - 23.00 0.524 - 0.906
HT-SCE-1K-11/2-2.0- <color> 38.10 1.500 19.05 0.750 20.95 - 34.00 0.825 -1.339
Total width as supplied 90.18 mm (3.550 inches) including tape and carrier width.
Options
Prescoring Perforated score to produce multiple marker sleeves from each HT-SCE sleeve
Number of prescores 1 prescore 2 prescores 3 prescores
Code S1 S2 S3
Package size Standard 1K - 1000 piece packs
Nonstandard Larger pack sizes are available. Please contact Tyco Electronics.
Colors Standard White Black
Code 9 0
Nonstandard Pink Blue Yellow
Code 2L 6 4
Ordering information: Specify product name, pack size, sleeve size, prescore, format and color.
Ordering example: HT-SCE-1K-1/4-2.0-S1-9
SOG-ER33-3 BT-M
50mm
(nom)
SOG-ER32-3 BT-M
SOG-ER13-3 BT-M
Dd
HX-SCE Low fire hazard heat-shrinkable wire identification sleeves
8Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Heat-Shrink/Cable Markers
Heat Shrink/Cable Markers
Wire and Harness ID Products
Thin wall, zero-halogen, low smoke, low toxicity, radiation cross-
linked, UV stabilised polyolefin heat-shrinkable tubing, assembled
as cut sleeves organized in a ladder format.
Identification of wires and cables by computer-based printing onto
sleeves. Ideal for applications where limited fire hazard
characteristics are necessary. The zero halogen material coupled
with low smoke and low toxic fume emissions make this product
best used in enclosed spaces such as mass transit, marine and
industrial installations.
This product is not recommended where strain relief properties are
required.
Features and benefits
Low fire hazard properties, low smoke, low toxicity, low
flammability. Meets industry standard BS 6853 (1999)
Vehicle Category 1a
Superb print quality to give crisp clear identification
marker sleeve
Excellent print permanence when tested in demanding
industry related fluids
Choice of printer options
Sleeve diameters from 2.4mm to 38.1mm
Sleeve length from 12.7mm to 50.8mm
Sleeves are printable on both sides for ease of
identification or inclusion of additional information
to the marker sleeve
Shrink ratio of 2:1 - recovers to half of the original
diameter
Temperature rating
Operating temperature range 30°C to +105°C –22°F to +221°F
Minimum recovery temperature +120°C +248°F
Maximum storage temperature +40°C +104°F
Specifications/approvals
Tyco Electronics RW 2072
TTDS-108
Military SAE AS81531 4.6.2
MIL-STD-202 Method 215J
Industry BS 6853 [1999] – Vehicle Category 1a
LUL toxic fume (LUL E1042:A6 [2002})
- No halogen, O, N or S sources
Printer information
Tyco Electronics printers T312M and T212M (thermal transfer)
Tyco Electronics ribbons 1966 - RIBBON (T312M)
T200 - RIBBON-1966 (T212M)
HX-SCE-1K-4.8 - 50 - S1 -4
Part numbering system
Color
Scoring (optional)
Sleeve length (mm)
Expanded inside diameter (inches)
Pack size
Product family
Heat Shrink/Cable Markers
Wire and Harness ID Products
HX-SCE Low fire hazard heat-shrinkable wire identification sleeves
9
Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Heat-Shrink/Cable Markers
Ordering information
Available sizes and formats
Inside diameter
Ordering D (min) d (max) Recommended
description as supplied after recovery use range
mm
inches
mm
inches
mm
inches
HX-SCE-1K-2.4 - 50- <color> 2.40 0.094 1.19 0.047 1.27 - 1.90 0.050 - 0.075
HX-SCE-1K-3.2 - 50- <color> 3.20 0.126 1.58 0.060 1.765 - 2.66 0.069 - 0.105
HX-SCE-1K-4.8 - 50- <color>> 4.80 0.189 2.36 0.090 2.54 - 4.06 0.100 - 0.160
HX-SCE-1K-6.4 - 50- <color> 6.40 0.250 3.18 0.125 3.81 - 5.46 0.150 - 0.215
HX-SCE-1K-9.5 - 50- <color> 9.50 0.375 4.75 0.187 5.59 - 8.12 0.220 - 0.320
HX-SCE-1K-12.7 - 50- <color> 12.70 0.500 6.35 0.250 6.99 - 10.79 0.275 - 0.425
HX-SCE-1K-19.0 - 50- <color> 19.00 0.730 9.53 0.375 10.16 - 16.25 0.400 - 0.640
HX-SCE-1K-25.4 - 50- <color> 25.40 1.000 12.70 0.500 14.29 - 21.59 0.563 - 0.850
HX-SCE-1K-38.1 - 50- <color> 38.10 1.500 19.05 0.750 20.95 - 33.02 0.825 - 1.300
Options
Prescoring Perforated score to produce multiple marker sleeves from each HX-SCE sleeve.
Nonstandard Side scored
Number of prescores 1 prescore 2 prescores 3 prescores
Code S1 S2 S3
Package sizes Standard 1K - 1000 piece packages available for all HX-SCE sizes up to 25.4
Nonstandard 2.5K - 2500 pieces available for 4.8 and 6.4 HX-SCE sizes
5K - 5000 pieces available for 2.4 and 3.2 HX-SCE sizes
250 piece package available for all HX-SCE sizes
Colors Standard Yellow White
Code 4 9
Nonstandard Red Green Blue Orange
Code 2 5 6 3
Ordering information: Specify product name, pack size, sleeve size, prescore, format and color.
Ordering example: HX-SCE-1K--50-S1-4
HX-SCE Low fire hazard heat-shrinkable wire identification sleeves
10 Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Heat-Shrink/Cable Markers
Heat Shrink/Cable Markers
Wire and Harness ID Products
Industry Standards
Standard Title Application
BS6853 Code of practice for fire precautions in the design Interior minor use materials of mass 100g to 500g.
and construction of passenger carrying trains. Vehicle category Ia.
1London Underground Limited Fire Safety Performance of Materials Limited, dispered usage (abbreciation RS/EQ/I)
Standard 2-01001-002
NF F 16-101 Railway Rolling Stock Fire behavior choice of materials Rolling Stock Classification A1
DIN 5510-2 Preventive fire protection in railway vehicles - Part 2: Fire Dripping Classification ST2
behavior and fire side effects of materials and parts;
Classification, Requirements and Test Methods.
2EN50343 Railway Applications - Rolling Stock - Tests on marking when using heat-shrinkable sleeves
Rules for installation of cabling.
1This replaces LUL Engineering Standard E1042
2 Not including resistance to liquid fuel - not recommended for use in areas where the sleeves may be subject to extended contact from diesel fuel - Tyco Electronics D-SCE
product range is designed for use in these areas.
Heat Shrink/Cable Markers
Wire and Harness ID Products
HX-SCE Low fire hazard heat-shrinkable wire identification sleeves
11
Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Heat-Shrink/Cable Markers
Technical Information
PPrriinntt MMeetthhoodd//RRiibbbboonn::T312M-PRINTER with 1966-RIBBON or
T212M-PRINTER with T200-1966-RIBBON
SSeerrvviiccee TTeemmppeerraattuurree-30˚C to +105˚C (-22˚F to +221˚F)
MMiinniimmuumm SShhrriinnkk TTeemmppeerraattuurree136˚C (275˚F)
CCoolloorrss::White or yellow.
Other colors available on request.
FFllaammmmaabbiilliittyy::SSeellff--eexxttiinngguuiisshhiinngg --
(ASTM D2671 Procedure B).
OOxxyyggeenn IInnddeexx ((BBSS66885533:: PPaassss 3344%% MMiinn..)) --
(BS EN ISO 4589-2 [1999]).
(AFNOR NF F 16-101 Class 12).
DDrriippppiinngg CCllaassssiiffiiccaattiio
onn SSTT22 --
(DIN 5510-2)
SSmmookkee::AA00--00..001177 MMaaxx.. (BS 6853 [1999]
Annex D [D.8.3] Small scale test
SSmmookkee IInnddeexx DDeetteerrmmiinnaattiioonn ((IIFF))
MMaaxxiimmuumm 00,, SSmmookkee CCllaassss FF11 -
(AFRNOR NF F 16-101-1988 Smoke Index)
TTooxxiicciittyy::RR << 11- (BS 6853 [1999] Annex B -
AFNOR NF X 70-100 Determination of
weighted summation of toxic fume, mass
based method)
LLUULL TTooxxiidd FFuummee:: NNoo.. HHaallooggeennss,, NNoo.. PP,, SS oorr
NN ssoouurrcceess aabboovvee ttrraaccee lleevveell --
(LUL E1042: A6 [2002]) -
London Underground Standard 2-01001-002,
section 5.2.3 Chemical composition/toxicity)
TTooxxiicciit
tyy IInnddeexx == 00..3344-
(CEI 20-37-7-09-1997 Determination of
toxicity index of gasses from combustion of
organic material
DDiieelleeccttrriicc SSttrreennggtthh::15V/mm minimum.
WWaatteerr AAbbssoorrppttiioonn11% maximum after 24 hours at 23C (73˚F)
CCooppppeerr MMiirrrroorr CCoorrrroossiioonn::8% maximum after 16 hours of 150˚C (302˚F)
LLoonnggiittuuddiinnaall CChhaannggee::+5% to -10%.
TTeennssiillee SSttrreennggtthh::7MPa minimum.
UUllttiimmaattee EElloonnggaattiioonn::80% minimum.
SSeeccaanntt MMoodduulluuss::200MPa mimum at 2% elongation.
UULLRReessiissttaannccee::Tensile strength >90% & ultimate elongation
>40% or original value after 1000 hours
(ASTM G53: UVA [100% dry cycle]; UVB
[8 hours dry/4 hours wet cycle]).
PPrriinntt PPeerrmmaanneennccee::ADHERENCE - Meets the requirements of
SE AS81531 4.6.2 (50 rubs).
FLUID RESISTANCE - Meets the
requirements of MIL-STD-202 method 215J.
D-SCE Fluid resistant heat-shrinkable wire identification sleeves
12 Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Heat-Shrink/Cable Markers
Heat Shrink/Cable Markers
Wire and Harness ID Products
D-SCE - 5K - 3.2 - 50 - S1- 4
Part numbering system
Color
Scoring (optional)
Sleeve length (mm)
Expanded inside diameter (mm)
Large packaging (optional)
Product family
D-SCE markers are used to identify wires and cables where
exposure to organic fluids, especially oils, is required. D-SCE
markers are designed to operate in these conditions at elevated
temperatures for extended periods of time, making them ideal in
aerospace, rail and construction industries. The D-SCE markers are
suitable for use in environments with temperatures of –55°C to
+135°C (–67°F to +275°F), and will provide strain relief,
insulation and protection from mechanical abuse. The 3:1 shrink
ratio markers* are assembled in a ladder format enabling sleeves to
be printed on both sides for maximum data content and
readability.
*See ordering description.
Features and benefits
Resistance to organic fluids, common fuels, lubricants
and solvents
3:1 shrink ratio
Wide range of sizes for several wire and bundle diameters
Formulated for use in aerospace, rail and construction
equipment
Dot matrix and thermal transfer printable — both print
technologies meet all specifications and approvals listed
Temperature rating
Operating temperature range 55°C to +135°C –67°F to +275°F
Minimum recovery temperature +135°C +275°F
Maximum storage temperature +40°C +104°F
Specifications/approvals
Tyco Electronics RW 2519
TTDS-017
Military SAE-AMS-DTL-23053/6, Class 1
(material and performance requirements)
SAE AS81531 4.6.2
MIL-STD-202 Method 215J
Industry NF F 00 608 Category A and H
Printer information
Tyco Electronics printer AM6310 (dot matrix)
T312M (thermal transfer)
Tyco Electronics ribbon 1892BK04-RIBBON (dot matrix)
1966-RIBBON
D-SCE Fluid resistant heat-shrinkable wire identification sleeves
13
Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Heat-Shrink/Cable Markers
Heat Shrink/Cable Markers
Wire and Harness ID Products
Ordering information
Available sizes and formats
Inside diameter
Ordering D (min) d (max) Recommended
description As supplied After recovery use range
mm
inches
mm
inches
mm
inches
D-SCE-1K-2.4-50-<color> 2.39 0.094 0.79 0.031 0.81 - 1.90 0.032 - 0.075
D-SCE-1K-3.2-50-<color> 3.18 0.125 1.07 0.043 1.11 - 2.66 0.044 - 0.105
D-SCE-1K-4.8-50-<color> 4.75 0.187 1.57 0.063 1.75 - 4.06 0.069 - 0.160
D-SCE-1K-6.4-50-<color> 6.35 0.250 2.11 0.084 2.31 - 5.46 0.091 - 0.215
D-SCE-1K-9.5-50-<color> 9.53 0.375 3.18 0.125 3.47 - 8.12 0.137 - 0.320
D-SCE-1K-12-50-<color> 12.70 0.500 4.22 0.167 4.64 - 10.79 0.183 - 0.425
D-SCE-1K-18-50-<color> 19.05 0.750 6.35 0.250 6.99 - 16.25 0.275 - 0.640
D-SCE-1K-25-50-<color> 25.40 1.000 8.46 0.333 9.29 - 21.59 0.366 - 0.850
D-SCE-1K-38-50-<color>* 38.10 1.500 19.05 0.750 20.95 - 33.02 0.825 - 1.300
* 2:1 shrink ratio
Total width as supplied 90.18 mm (3.550 inches) including tape and carrier width.
Options
Prescoring Perforated score to produce multiple marker sleeves from each D-SCE sleeve.
Standard Side scored
Number of prescores 1 prescore 2 prescores 3 prescores
Code S1 S2 S3
Package sizes Standard 1K - 1000 piece packages available for all D-SCE sizes
Nonstandard Larger pack sizes are available. Please contact Tyco Electronics.
Colors Standard White Yellow
Code 9 4
Nonstandard Pink Blue
Code 2L 6
Ordering information: Specify product name, pack size, sleeve size, prescore, format and color.
Ordering example: D-SCE-1K-6.4-50-S2-4
SOG-ER33-3 BT-M
50mm
(nom)
SOG-ER32-3 BT-M
SOG-ER13-3 BT-M
Dd
NBC-SCE Nuclear, biological, chemical resistant heat-shrinkable
wire identification sleeves
Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Heat-Shrink/Cable Markers
Heat Shrink/Cable Markers
Wire and Harness ID Products
14
NBC-SCE - 1K-1/4-2.0-S1-9
Part numbering system
Color
Scoring (optional)
Sleeve length (inches)
Expanded inside diameter (inches)
Large packaging (optional)
Product family
Tyco Electronics NBC-SCE is used to identify wire and cables
where extreme resistance to cleaning solvents is needed. The
markers are suitable for use in wire harness systems requiring high
fluid resistance and resistance to the effects of nuclear, biological
and chemical agent exposure and decontamination. The markers
should be used with an appropriate transparent oversleeve whose
ends are sealed with an appropriate epoxy adhesive.
NBC-SCE marker sleeves are suitable for use in environments with
temperatures from –55°C to +225°C (–67°F to +437°F).
Features and benefits
Permanent identification sleeves
Computer-printable
2:1 shrink ratio
NBC application with the appropriate adhesive and oversleeve
Temperature rating
Operating temperature range 55°C to +225°C 67°F to +437°F
Minimum recovery temperature +200°C +392°F
Maximum storage temperature +40°C +104°F
Specifications/approvals
Tyco Electronics RW 2514
Military SAE AS81531 4.6.2
MIL-STD-202 Method 215J
Printer information
Tyco Electronics printer T312M (thermal transfer)
Tyco Electronics ribbon TMS-RJS-RIBBON-4HT (thermal
transfer)
NBC-SCE Nuclear, biological, chemical resistant heat-shrinkable
wire identification sleeves
15
Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Heat-Shrink/Cable Markers
Heat Shrink/Cable Markers
Wire and Harness ID Products
Ordering information
Available sizes and formats
Inside diameter
Ordering Expanded Recovered Recommended Recovered wall
description D (minimum) d (maximum) use range thickness
mm
inches
mm
inches
mm
inches
mm
inches
NBC-SCE-1K-1
/8- 2.0<color> 3.43 0.135 1.59 0.062 1.75-2.66 0.069-0.105 0.38 ± 0.08 0.015 ± 0.003
NBC-SCE-1K-1
/4- 2.0<color> 6.35 0.250 3.18 0.125 3.81-5.46 0.150-0.215 0.38 ± 0.08 0.015 ± 0.003
NBC-SCE-1K-1
/2- 2.0<color> 12.70 0.500 6.35 0.250 6.99-10.79 0.275-0.425 0.38 ± 0.08 0.015 ± 0.003
NBC-SCE-1K-3/4- 2.0<color> 19.05 0.750 9.53 0.375 10.16-16.25 0.400-0.640 0.38 ± 0.08 0.015 ± 0.003
NBC-SCE-1K-1- 2.0<color> 25.40 1.000 12.70 0.500 14.70-21.50 0.578-0.846 0.43 ± 0.10 0.017 ± 0.004
NBC-SCE-1K-1-1
/2- 2.0<color> 38.10 1.500 19.05 0.750 20.95-33.02 0.825-1.300 0.43 ± 0.10 0.017 ± 0.004
Total width as supplied 90.18 mm (3.550 inches) including tape and carrier width.
Options
Prescoring Perforated score to produce multiple marker sleeves from each NBC-SCE sleeve.
Number of prescores 1 prescore 2 prescores 3 prescores
Code S1 S2 S3
Package sizes Standard 1000 piece packages available for all NBC-SCE sizes
Colors Standard White
Code 9
Ordering information: Please specify product name, pack size, sleeve size, prescore, format and color.
Ordering example: NBC-SCE-1K-1
/8-2.0-9
SOG-ER33-3 BT-M
50mm
(nom)
SOG-ER32-3 BT-M
SOG-ER13-3 BT-M
Dd
RPS Commercial grade heat-shrinkable wire identification sleeves
16 Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Heat-Shrink/Cable Markers
Heat Shrink/Cable Markers
Wire and Harness ID Products
RPS-1K-22-18/2.0-S1-9
Part numbering system
Color
Scoring (optional)
Sleeve length (inches)
US wire gauge size
Pack size
Product family
RPS markers are heat shrinkable marking sleeves for wire and
cable identification. When RPS is printed with Tyco Electronics
recommended printers and ink ribbons, the marks remain legible,
without any post printing process, even when exposed to
abrasion, aggressive cleaning solvents, and industrial fluids.
RPS markers are designed to meet the wire identification needs of
commercial and industrial customers.
Features and benefits
Permanent identification sleeves
Computer printable
Excellent print performance
Configured for ease of kitting
Good chemical and solvent resistance
3:1 shrink ratio
CSA Certified, UL Recognized
Temperature rating
Operating temperature range 30°C to +105°C 22°F to +221°F
Minimum recovery temperature +85°C +185°F
Maximum storage temperature +40°C +104°F
Specifications/approvals
Tyco Electronics RW 2510
TTDS-019
Military SAE AS81531 4.6.2
MIL-STD-202 Method 215J
Industry UL Recognized – standard 224,
file E35586
CSA Certified – file 31929
Printer information
Tyco Electronics printer AM6310 (dot matrix)
T208M (thermal transfer – low volume)
T312M (thermal transfer)
Tyco Electronics ribbon 1892BK04-RIBBON (dot matrix)
TMS-101-RIBBON-4RPSCE (thermal transfer
for T208M)
TMS-RJS-RIBBON-4RPSCE (thermal transfer
for T312M)
RPS Commercial grade heat-shrinkable wire identification sleeves
17
Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Heat-Shrink/Cable Markers
Heat Shrink/Cable Markers
Wire and Harness ID Products
Ordering information
Available sizes and formats
Inside diameter
Ordering D (min) d (max) Recommended
description as supplied after recovery use range
mm
inches
mm
inches
mm
inches
RPS-1K-22-18/2.0- <color> 3.18 0.125 1.07 0.042 1.17 - 2.66 0.046 - 0.105
RPS-1K-18-12/2.0- <color> 4.75 0.187 1.57 0.062 1.75 - 4.06 0.069 - 0.160
RPS-1K-16-10/2.0- <color> 6.35 0.250 2.11 0.083 2.31 - 5.46 0.091 - 0.215
RPS-1K-8-4/2.0- <color> 9.53 0.375 3.18 0.125 3.47 - 8.12 0.137 - 0.320
RPS-1K-10-2/2.0- <color> 12.70 0.500 4.22 0.166 4.64 - 10.79 0.183 - 0.425
RPS-1K-6-250/2.0- <color> 19.05 0.750 6.35 0.250 6.99 - 16.25 0.275 - 0.640
RPS-1K-1-400/2.0- <color> 25.40 1.000 8.46 0.333 9.29 - 21.59 0.366 - 0.850
RPS-1K-400-1000/2.0- <color> 38.10 1.500 19.05 0.750 20.95 - 33.02 0.825 - 1.300
Total width as supplied 90.18 mm (3.550 inches) including tape and carrier width.
Options
Prescoring Perforated score to produce multiple marker sleeves from each RPS sleeve.
Number of prescores 1 prescore 2 prescores 3 prescores
Code S1 S2 S3
Package sizes Standard 1K -1000 piece packs
Nonstandard Smaller and larger pack sizes are available. Please contact Tyco Electronics.
Colors Standard White Yellow
Code 9 4
Ordering information: Specify product name, pack size, sleeve size, prescore, format and color.
Ordering example: RPS-1K-22-18/2.0-S2-9
SOG-ER33-3 BT-M
50mm
(nom)
SOG-ER32-3 BT-M
SOG-ER13-3 BT-M
Dd
TMS-CCUV Heat-shrinkable UV protection sleeves
18 Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Heat-Shrink/Cable Markers
Heat Shrink/Cable Markers
Wire and Harness ID Products
TMS-CCUV clear heat shrinkable sleeves are designed for over
protection of TMS System Six identification products, to give
increased protection for permanent, long-term environmental
exposure. The clear CCUV heat-shrinkable sleeves are formulated
to combine a long-term barrier to the effects of ultra-violet, with
tough resistance to abrasion and industrial fluids. They are
available in packs which match the product sizes and pack
quantities of TMS System Six heat-shrinkable identification sleeves
and cable markers.
The TMS CCUV sleeves are inherently low profile and use the
action of heat-shrink to lock in place over the previously installed
identification sleeves; except for cable markers which use a slide
fitting CCUV sleeve which is held in place by the cable ties.
The action of heat-shrink locking of the CCUV sleeves means there
is no reliance on the long term performance of adhesives to hold
the outer protection layer in place, and also gives the ability to
accommodate cables and wire bundles which may be bent or
flexed during use.
Features and benefits
Exceptional clarity and stability
Added UV-resistant sleeves
Not printable
Tough resistance to abrasion and industrial fluids
Heat-shrink locking in place (no reliance on adhesives)
Low profile
Accommodates bent or flexing cable/wire bundles
Can work as an NBC (nuclear, biological, chemical) System with
NBC-SCE sleeves and appropriate adhesive
Temperature rating
Operating temperature range 55°C to +150°C –67°F to 302°F
Minimum recovery temperature +150°C +302°F
Maximum storage temperature +40°C +104°F
Specifications/approvals
Tyco Electronics RW 2525
Military UL VW-1 rated
SAE-AMS-DTL-23053/18, Class 2
Before shrinking
L
D
After shrinking over TMS cable sleeve
TMS IDENT SLEEVE
Wire dia.
60mm to 65mm
TMS CABLE
MARKER
Cable dia.
32mm
After sliding over TMS cable marker
TMS CABLE MARKER
60mm to 65mm
After shrinking over TMS cable marker
TMS-CCUV- SLEEVE-1- X-65mm
Part numbering system
Sleeve length (mm)
Color (clear for all)
Sleeve reference
Loose sleeves
CCUV sleeve
Ordering information