C O N WIRE AND HARNESS ID PRODUCTS T E N T S 3 Heat Shrink/Cable Markers Performance Labels Self-Laminating Labels Pre-Printed Wire and Cable Markers LABEL ID PRODUCTS 86 Product Code Cross Reference Thermal Transfer Labels Dot Matrix Labels Laser Labels HARDWARE/SOFTWARE 134 Printers Scanners and Imagers Laser Marking Systems Ribbons Software Application Systems SPECIALTY PRODUCTS 164 RFID Pre-Print Services Permark(R) Rail -- Signal Products Tube and Pipe ID Labels OBSOLETE REFERENCE Printer/Material/Ribbon Cross Reference 180 NOT the LATEST REVISION Master Material Specification Chart 182 Industry Icon Key 186 Part Number Index 187 1 Engineering Notes 2 Catalog 1654227 Revised 04-07 www.tycoelectronics.com Dimensions not italicized are in millimeters while dimensions in inches are italicized. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 TMS-SCE Military Grade Sleeves . . . . . . . .4 HT-SCE High Temperature Sleeves . . . . . .6 HX-SCE Low Fire Hazard Sleeves . . . . . . .8 D-SCE Fluid Resistant Sleeves . . . . . . . . .12 NBC-SCE Nuclear, Biological and Chemical Resistant Sleeves . . . . . . . . . . . . . . . . . . . . .14 RPS Commercial Grade Sleeves . . . . . . .16 TMS-CCUV UV Resistant Oversleeves . .18 CM-SCE Polyolefin Tags . . . . . . . . . . . . . . .20 HTCM-SCE High Temp Tie-on Tags . . . .22 HLX Low Fire Hazard Tie-on Tags . . . . . .24 HLX-NEL Low Fire Hazard Tie-On Tags .26 HL Tie-On Tags . . . . . . . . . . . . . . . . . . . . . . .28 NMX Flame Retardant Polyaramid Tags . . . . . . . . . . . . . . . . . . . . . .30 MultiMark . . . . . . . . . . . . . . . . . . . . . . . . . . . .32 iMC Snap-on Cable Clip . . . . . . . . . . . . . . .34 iKC/iKB Tie-On Cable Clip . . . . . . . . . . . . .36 PERFORMANCE LABELS VF/NPVF/VF-130 Polyvinyl Fluoride . .38 RMK-6 Epoxy Coated Polyester . . . . . . .40 RMK Epoxy Coated Polyester . . . . . . . . .42 TTP Polyester . . . . . . . . . . . . . . . . . . . . . . . . .44 HPK Polypropylene . . . . . . . . . . . . . . . . . . .46 Wire and Harness ID Products HEAT SHRINK/CABLE MARKERS SELF-LAMINATING LABELS SB Thermal Transfer Vinyl . . . . . . . . . . . . .48 SP Self Laminating Polyester . . . . . . . . . .50 PVF Thermal Transfer Polyvinyl Fluoride . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52 TW Dot Matrix Vinyl . . . . . . . . . . . . . . . . . .54 PV Dot Matrix Polyvinyl Fluoride . . . . . . .56 LSR Polyester Laser Printable . . . . . . . . .58 CSL Polyester Laser Printable . . . . . . . . .60 TKM Self-writable, Self-laminating Label Booklet . . . . . . . . . . . . . . . . . . . . . . . . .62 Label Dimensions . . . . . . . . . . . . . . . . . . . . .64 TEK Vinyl Fabric Labels . . . . . . . . . . . . . . .66 CMD Label Dispenser . . . . . . . . . . . . . . . . .68 WCD Label Dispenser . . . . . . . . . . . . . . . . .70 PRE-PRINTED WIRE AND CABLE MARKERS K-Type Cable Markers . . . . . . . . . . . . . . . . .72 G-Type Cable Markers . . . . . . . . . . . . . . . . .74 Z-Type Push On Wire Markers . . . . . . . . .76 V-Type Cable Markers . . . . . . . . . . . . . . . . .78 Catalog 1654227 Revised 04-07 www.tycoelectronics.com Dimensions not italicized are in millimeters while dimensions in inches are italicized. Dimensions are shown for reference purposes only. Specifications subject to change. O-Type Cable Markers . . . . . . . . . . . . . . . . .80 Snap On Markers . . . . . . . . . . . . . . . . . . . . .82 CWM Wire Marker Cards . . . . . . . . . . . . .84 USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 3 Wire and Harness ID Products Heat-Shrink/Cable Markers TMS-SCE Military grade heat shrinkable wire identification sleeves TMS-SCE marker sleeves are designed to meet the wire and cable marking needs of manufacturers with high performance requirements. Made from durable, flame retardant, radiationcrosslinked heat-shrinkable polyolefin, TMS-SCE marker sleeves can be used in a wide variety of applications. All TMS-SCE meet the performance requirements of SAE-ASM-DTL-23053/5 class 1. TMS-SCE-2X meets all of the requirements of SAE-AMS-DTL23053/5 classes 1 and 3. The marks are permanent immediately after printing and remain legible even when exposed to abrasion, aggressive cleaning solvents, and military fuels and oils. The sleeves meet the mark permanence requirements of SAE AS81531 4.6.2 and MIL-STD-202 both before and after shrinking. Both 2:1 and 3:1 shrink ratios are available. The 2:1 products provide a thick, rugged sleeve wall and are particularly easy to handle. The lightweight 3:1 products provide extremely fast shrinking and cover a wider range of wire diameters, thus simplifying inventory. The marker sleeves are designed to be printed by computer-driven dot matrix or thermal transfer printers, providing several advantages in terms of reduced errors, cycle time and cost. Supplied in a thin, flat "ladder" format, the sleeves are held horizontally between two hole-punched polyester strips. This configuration feeds directly from the storage box into a Tyco Electronics recommended printer. Tyco Electronics recommended ribbons should always be used. The ladder format provides automatic kitting of the marker sleeves in the desired sequence. A standard heat gun with reflector is used to shrink the sleeves onto the wire or cable. Temperature rating Operating temperature range -55C to +135C -67F to +275F Minimum recovery temperature +85C +185F Maximum storage temperature +40C +104F Specifications/approvals Tyco Electronics RW 2511 TTDS-023 Military SAE-AMS-DTL-23053/5 class1 and 3 (TMS-SCE-2X) SAE-AMS-DTL-23053/5 class 1 (TMS-SCE) SAE AS81531 4.6.2, MIL-STD-202 Method 215J Industry UL Recognized - Standard 224, file E35586 (TMS-SCE-2X is UL224-VW1 rated. TMS-SCE is UL224all tube flame test rated) CSA Certified - File 31929 Heat Shrink/Cable Markers Features and benefits 4 Printer information Permanent identification sleeves Computer-printable T200 Series (thermal transfer, low volume) Lightweight for aerospace applications T312M (thermal transfer) Military specification material and print performance Tyco Electronics printer Tyco Electronics ribbon AM6310 (dot matrix) 1892BK04-RIBBON (dot matrix) TMS-101-RIBBON-4RPSCE (thermal transfer for T208M) TMS-RJS-RIBBON-4RPSCE (thermal transfer for T312M)) 2:1 and 3:1 shrink ratio CSA Certified UL Recognized, VW all flame tubing test rated Part numbering system Quick recovery for heat sensitive areas TMS-SCE - 2X -1K- 1/ 8 - 2.0-S1-9 Color (white or yellow) Scoring (optional) Sleeve length (2.0" nominal) (omit for 2X) Inside diameter, as supplied ( inches) Standard Pack (1,000 pieces) 2X is optional (2:1 shrink ratio: if left out, product will be 3:1) Product family Catalog 1654227 Revised 04-07 www.tycoelectronics.com Dimensions not italicized are in millimeters while dimensions in inches are italicized. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Ordering information 50mm (nom ) SOG-ER33-3 BT-M D SOG-ER32-3 BT-M d SOG-ER13-3 BT-M Available sizes and formats Inside diameter Expanded Recovered D (minimum) d (maximum) Ordering description Recommended use range Recovered wall thickness mm inches mm inches Weight mm inches mm inches TMS-SCE-1K- 3/32-2.0 - <color> 2.36 0.093 0.79 0.031 0.81 - 1.90 0.032 - 0.075 0.53 0.08 0.021 0.003 TMS-SCE-2X-1K- 3/32 - <color> 2.36 0.093 1.17 0.046 1.27 - 1.90 0.050 - 0.075 0.64 0.08 0.025 0.003 2.04 TMS-SCE-1K- 1/8-2.0 - <color> 3.18 0.125 1.07 0.042 1.11 - 2.66 0.044 - 0.105 0.58 0.08 0.023 0.003 2.03 TMS-SCE-2X-1K- 1/8- <color> 3.18 0.125 1.58 0.062 1.75 - 2.66 0.069 - 0.105 0.64 0.08 0.025 0.003 2.75 TMS-SCE-1K- 3/16-2.0 - <color> 4.75 0.187 1.57 0.062 1.75 - 4.06 0.069 - 0.160 0.58 0.08 0.023 0.003 2.68 TMS-SCE-2X-1K- 3/16- <color> 4.75 0.187 2.36 0.093 2.54 - 4.06 0.100 - 0.160 0.64 0.08 0.025 0.003 3.62 (g/10 pcs.) 1.50 TMS-SCE-1K- 1/4-2.0 - <color> 6.35 0.250 2.11 0.083 2.31 - 5.46 0.091 - 0.215 0.58 0.08 0.023 0.003 3.51 TMS-SCE-2X-1K- 1/4- <color> 6.35 0.250 3.18 0.125 3.81 - 5.46 0.150 - 0.215 0.64 0.08 0.025 0.003 5.94 TMS-SCE-1K- 3/8-2.0 - <color> 9.53 0.375 3.18 0.125 3.47 - 8.12 0.137 - 0.320 0.61 0.08 0.024 0.003 5.04 TMS-SCE-2X-1K- 3/8- <color> 9.53 0.375 4.75 0.187 5.59 - 8.12 0.220 - 0.320 0.64 0.08 0.025 0.003 8.50 TMS-SCE-1K- 1/2-2.0 - <color> 12.70 0.500 4.22 0.166 4.64 - 10.79 0.183 - 0.425 0.61 0.08 0.024 0.003 6.81 TMS-SCE-2X-1K- 1/2- <color> 12.70 0.500 6.35 0.250 6.99 - 10.79 0.275 - 0.425 0.64 0.08 0.025 0.003 11.45 TMS-SCE-1K-- 3/4-2.0 - <color> 19.05 0.750 6.35 0.250 6.99 - 16.25 0.275 - 0.640 0.61 0.08 0.024 0.003 12.03 TMS-SCE-2X-1K- 3/4- <color> 19.05 0.750 9.53 0.375 10.16 - 16.25 0.400 - 0.640 0.76 0.08 0.030 0.003 20.63 TMS-SCE-1K-1-2.0 - <color> 25.40 1.000 8.46 0.333 9.29 - 21.59 0.366 - 0.850 0.64 0.08 0.025 0.003 15.35 TMS-SCE-1K-11/2-2.0 - <color> 38.10 1.500 19.05 0.750 20.95 - 33.02 0.825 - 1.300 0.51 0.08 0.020 0.003 27.51 TMS-SCE-1K-2-2.0 - <color> 50.80 2.000 25.40 1.000 27.94 - 44.95 1.100 - 1.750 0.64 0.08 0.025 0.003 47.27 19.05 0.750 22.32 - 50.80 TMS-SCE-1K-21/4-2.0 - <color> 57.15 2.250 Total width as supplied 90.18 mm (3.550 inches) including tape and carrier width. 0.880 - 2.000 0.76 0.08 0.030 0.003 42.06 Options Prescoring Package sizes Colors Perforated score to produce multiple markers from each sleeve. Number of prescores 1 prescore 2 prescores 3 prescores Code S1 S2 S3 Standard 1K - 1000-piece packs Nonstandard Smaller and larger pack sizes are available. Please contact Tyco Electronics. Standard Yellow Code 4 White 9 Nonstandard Red Pink Orange Green Blue Violet Gray Black Code 2 2L 3 5 6 7 8 0 Note: 3:1 products yellow and white meet the color requirements of MIL-STD-104 class 1. Otherwise colors are pastel for print contrast. Ordering information: Specify product name, pack size, sleeve size, prescore format, and color. Ordering example: TMS-SCE-1K-1/8-2.0-S1-9 (scored once) TMS-SCE-2X only available in white Catalog 1654227 Revised 04-07 www.tycoelectronics.com Dimensions not italicized are in millimeters while dimensions in inches are italicized. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Wire and Harness ID Products TMS-SCE Military grade heat shrinkable wire identification sleeves Heat Shrink/Cable Markers Heat-Shrink/Cable Markers 5 Wire and Harness ID Products Heat-Shrink/Cable Markers HT-SCE High temperature, low outgassing heat-shrinkable wire identification sleeves HT-SCE wire markers are designed for use in high temperature applications or where extreme resistance to fuels, lubricants and cleaning solvents is required. They are also ideal for applications in which low-vacuum outgassing is of high importance. The marker sleeves are made of highly flame retardant, heat-shrinkable fluoropolymer tubing. HT-SCE markers are supplied as a thin, flat "ladder" of sleeves held horizontally between two polyester strips. This configuration feeds directly from the storage box into standard Tyco Electronics recommended printers, with no modifications necessary. A strip of adhesive tape on each side of the sleeves holds them securely in place for printing and kitting, yet the sleeves pull easily from the carrier strips. A standard heat gun with reflector is used to shrink the sleeves onto the wire or cable to achieve a permanent mark. After shrinking, HT-SCE markers meet the print performance requirements of SAE AS81531 4.6.2 and MIL-STD-202. HT-SCE markers are supplied in boxes of 1000 sleeves and are available in nine diameter sizes. These cover substrates from 0.8mm to 34.0mm. Because of this versatility, customers need not carry a large inventory of markers. Features and benefits Permanent identification sleeves High continuous operating temperature Extreme fluid resistance Low-vacuum outgassing Wide range of sleeve sizes for several wire and bundle diameters Heat Shrink/Cable Markers 6 Temperature rating Operating temperature range -55C to +225C -67F to +437F Minimum recovery temperature +200C +392F Maximum storage temperature +40C +104F Specifications/approvals Tyco Electronics Military RW 2512 TTDS-020 SAE AS 81531 4.6.2 MIL-STD-202 Method 215J Printer information Tyco Electronics printer T312M (thermal transfer) Tyco Electronics ribbon TMS-RJS-RIBBON-4HT (thermal transfer) Part numbering system HT-SCE - 1K-1/4 - 2.0 - S1 - 0 Color Scoring (optional) Sleeve length (inches) Expanded inside diameter (inches) Pack size Product family Catalog 1654227 Revised 04-07 www.tycoelectronics.com Dimensions not italicized are in millimeters while dimensions in inches are italicized. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 HT-SCE High temperature, low outgassing heat-shrinkable wire identification sleeves Ordering information 50mm (nom ) SOG-ER33-3 BT-M D SOG-ER32-3 BT-M d SOG-ER13-3 BT-M Available sizes and formats Inside diameter Ordering description D (min) As supplied d (max) After recovery Recommended use range mm inches mm inches HT-SCE-1K- 3/32 -2.0- <color> 2.36 0.093 0.79 0.031 0.81 - 1.90 HT-SCE-1K - 1/8 -2.0- <color> 3.18 0.125 1.58 0.062 1.75 - 2.66 0.069 - 0.105 HT-SCE-1K- 3/16 -2.0- <color> 4.75 0.187 2.36 0.093 2.54 - 4.06 0.100 - 0.160 mm inches 0.032 - 0.075 HT-SCE-1K- 1/4 -2.0- <color> 6.35 0.250 3.18 0.125 3.40 - 6.00 0.134 - 0.236 HT-SCE-1K- 3/8 -2.0- <color> 9.53 0.375 4.75 0.187 5.30 - 8.10 0.209 - 0.319 HT-SCE-1K- 1/2 -2.0- <color> 12.70 0.500 6.35 0.250 6.60 - 11.40 0.260 - 0.449 HT-SCE-1K- 3/4 -2.0- <color> 18.00 0.709 9.00 0.354 9.90 - 15.30 0.390 - 0.602 HT-SCE-1K-1-2.0- <color> 25.40 1.000 12.70 0.500 13.30 - 23.00 0.524 - 0.906 HT-SCE-1K-11/2 -2.0- <color> 38.10 1.500 19.05 0.750 Total width as supplied 90.18 mm (3.550 inches) including tape and carrier width. 20.95 - 34.00 0.825 -1.339 Wire and Harness ID Products Heat-Shrink/Cable Markers Options Perforated score to produce multiple marker sleeves from each HT-SCE sleeve Number of prescores 1 prescore 2 prescores 3 prescores Code S1 S2 S3 Package size Standard 1K - 1000 piece packs Nonstandard Larger pack sizes are available. Please contact Tyco Electronics. Colors Standard White Code 9 0 Nonstandard Pink Blue Yellow Code 2L 6 4 Heat Shrink/Cable Markers Prescoring Black Ordering information: Specify product name, pack size, sleeve size, prescore, format and color. Ordering example: HT-SCE-1K-1/4-2.0-S1-9 Catalog 1654227 Revised 04-07 www.tycoelectronics.com Dimensions not italicized are in millimeters while dimensions in inches are italicized. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 7 Wire and Harness ID Products Heat-Shrink/Cable Markers HX-SCE Low fire hazard heat-shrinkable wire identification sleeves Thin wall, zero-halogen, low smoke, low toxicity, radiation crosslinked, UV stabilised polyolefin heat-shrinkable tubing, assembled as cut sleeves organized in a ladder format. Identification of wires and cables by computer-based printing onto sleeves. Ideal for applications where limited fire hazard characteristics are necessary. The zero halogen material coupled with low smoke and low toxic fume emissions make this product best used in enclosed spaces such as mass transit, marine and industrial installations. This product is not recommended where strain relief properties are required. Features and benefits Low fire hazard properties, low smoke, low toxicity, low flammability. Meets industry standard BS 6853 (1999) Vehicle Category 1a Superb print quality to give crisp clear identification marker sleeve Operating temperature range -30C to +105C -22F to +221F Minimum recovery temperature +120C +248F Excellent print permanence when tested in demanding industry related fluids Maximum storage temperature +40C +104F Choice of printer options Sleeve diameters from 2.4mm to 38.1mm Sleeve length from 12.7mm to 50.8mm Sleeves are printable on both sides for ease of identification or inclusion of additional information to the marker sleeve Temperature rating Specifications/approvals Tyco Electronics Heat Shrink/Cable Markers 8 Shrink ratio of 2:1 - recovers to half of the original diameter Military RW 2072 TTDS-108 SAE AS81531 4.6.2 MIL-STD-202 Method 215J Industry BS 6853 [1999] - Vehicle Category 1a LUL toxic fume (LUL E1042:A6 [2002}) - No halogen, O, N or S sources Printer information Tyco Electronics printers T312M and T212M (thermal transfer) Tyco Electronics ribbons 1966 - RIBBON (T312M) T200 - RIBBON-1966 (T212M) Part numbering system HX-SCE- 1K-4.8 - 50 - S1 - 4 Color Scoring (optional) Sleeve length (mm) Expanded inside diameter (inches) Pack size Product family Catalog 1654227 Revised 04-07 www.tycoelectronics.com Dimensions not italicized are in millimeters while dimensions in inches are italicized. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 HX-SCE Low fire hazard heat-shrinkable wire identification sleeves Ordering information Available sizes and formats Inside diameter Ordering description D (min) as supplied d (max) after recovery Recommended use range mm inches mm inches 2.40 0.094 1.19 0.047 1.27 - 1.90 0.050 - 0.075 HX-SCE-1K- 3.2 - 50- <color> 3.20 0.126 1.58 0.060 1.765 - 2.66 0.069 - 0.105 HX-SCE-1K- 4.8 - 50- <color>> 4.80 0.189 2.36 0.090 2.54 - 4.06 0.100 - 0.160 HX-SCE-1K- 6.4 - 50- <color> 6.40 0.250 3.18 0.125 3.81 - 5.46 0.150 - 0.215 HX-SCE-1K- 2.4 - 50- <color> mm inches HX-SCE-1K- 9.5 - 50- <color> 9.50 0.375 4.75 0.187 5.59 - 8.12 0.220 - 0.320 HX-SCE-1K- 12.7 - 50- <color> 12.70 0.500 6.35 0.250 6.99 - 10.79 0.275 - 0.425 HX-SCE-1K- 19.0 - 50- <color> 19.00 0.730 9.53 0.375 10.16 - 16.25 0.400 - 0.640 HX-SCE-1K- 25.4 - 50- <color> 25.40 1.000 12.70 0.500 14.29 - 21.59 0.563 - 0.850 HX-SCE-1K- 38.1 - 50- <color> 38.10 1.500 19.05 0.750 20.95 - 33.02 0.825 - 1.300 Wire and Harness ID Products Heat-Shrink/Cable Markers Options Package sizes Perforated score to produce multiple marker sleeves from each HX-SCE sleeve. Nonstandard Side scored Number of prescores 1 prescore 2 prescores 3 prescores Code S1 S2 S3 Standard 1K - 1000 piece packages available for all HX-SCE sizes up to 25.4 Nonstandard 2.5K - 2500 pieces available for 4.8 and 6.4 HX-SCE sizes Heat Shrink/Cable Markers Prescoring 5K - 5000 pieces available for 2.4 and 3.2 HX-SCE sizes 250 piece package available for all HX-SCE sizes Colors Standard Yellow White Code 4 9 Nonstandard Red Green Blue Orange Code 2 5 6 3 Ordering information: Specify product name, pack size, sleeve size, prescore, format and color. Ordering example: HX-SCE-1K--50-S1-4 Catalog 1654227 Revised 04-07 www.tycoelectronics.com Dimensions not italicized are in millimeters while dimensions in inches are italicized. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 9 Wire and Harness ID Products Heat-Shrink/Cable Markers HX-SCE Low fire hazard heat-shrinkable wire identification sleeves Industry Standards Standard Title BS6853 Code of practice for fire precautions in the design Interior minor use materials of mass 100g to 500g. and construction of passenger carrying trains. Vehicle category Ia. Fire Safety Performance of Materials Limited, dispered usage (abbreciation RS/EQ/I) Railway Rolling Stock Fire behavior choice of materials Rolling Stock Classification A1 Preventive fire protection in railway vehicles - Part 2: Fire Dripping Classification ST2 1 London Underground Limited Application Standard 2-01001-002 NF F 16-101 DIN 5510-2 behavior and fire side effects of materials and parts; Classification, Requirements and Test Methods. 2 EN50343 Railway Applications - Rolling Stock - Tests on marking when using heat-shrinkable sleeves Rules for installation of cabling. 1 This replaces LUL Engineering Standard E1042 2 Not including resistance to liquid fuel - not recommended for use in areas where the sleeves may be subject to extended contact from diesel fuel - Tyco Electronics D-SCE Heat Shrink/Cable Markers product range is designed for use in these areas. 10 Catalog 1654227 Revised 04-07 www.tycoelectronics.com Dimensions not italicized are in millimeters while dimensions in inches are italicized. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 HX-SCE Low fire hazard heat-shrinkable wire identification sleeves Technical Information Print Method/Ribbon: T312M-PRINTER with 1966-RIBBON or T212M-PRINTER with T200-1966-RIBBON Service Temperature -30C to +105C (-22F to +221F) Minimum Shrink Temperature 136C (275F) Colors: White or yellow. Other colors available on request. Flammability: Self-extinguishing (ASTM D2671 Procedure B). Oxygen Index (BS6853: Pass 34% Min.) (BS EN ISO 4589-2 [1999]). (AFNOR NF F 16-101 Class 12). Dripping Classification ST2 (DIN 5510-2) Smoke: A0-0.017 Max. (BS 6853 [1999] Annex D [D.8.3] Small scale test Smoke Index Determination (IF) Maximum 0, Smoke Class F1 (AFRNOR NF F 16-101-1988 Smoke Index) Toxicity: R < 1 - (BS 6853 [1999] Annex B - Wire and Harness ID Products Heat-Shrink/Cable Markers AFNOR NF X 70-100 Determination of weighted summation of toxic fume, mass based method) LUL Toxid Fume: No. Halogens, No. P, S or N sources above trace level (LUL E1042: A6 [2002]) London Underground Standard 2-01001-002, section 5.2.3 Chemical composition/toxicity) Toxicity Index = 0.34 - toxicity index of gasses from combustion of organic material Dielectric Strength: 15V/mm minimum. Water Absorption 11% maximum after 24 hours at 23C (73F) Copper Mirror Corrosion: 8% maximum after 16 hours of 150C (302F) Longitudinal Change: +5% to -10%. Tensile Strength: 7MPa minimum. Ultimate Elongation: 80% minimum. Secant Modulus: 200MPa mimum at 2% elongation. UL Resistance: Tensile strength >90% & ultimate elongation >40% or original value after 1000 hours (ASTM G53: UVA [100% dry cycle]; UVB [8 hours dry/4 hours wet cycle]). Print Permanence: ADHERENCE - Meets the requirements of SE AS81531 4.6.2 (50 rubs). FLUID RESISTANCE - Meets the requirements of MIL-STD-202 method 215J. Catalog 1654227 Revised 04-07 www.tycoelectronics.com Dimensions not italicized are in millimeters while dimensions in inches are italicized. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Heat Shrink/Cable Markers (CEI 20-37-7-09-1997 Determination of 11 Wire and Harness ID Products Heat-Shrink/Cable Markers D-SCE Fluid resistant heat-shrinkable wire identification sleeves D-SCE markers are used to identify wires and cables where exposure to organic fluids, especially oils, is required. D-SCE markers are designed to operate in these conditions at elevated temperatures for extended periods of time, making them ideal in aerospace, rail and construction industries. The D-SCE markers are suitable for use in environments with temperatures of - 55C to +135C (- 67F to +275F), and will provide strain relief, insulation and protection from mechanical abuse. The 3:1 shrink ratio markers* are assembled in a ladder format enabling sleeves to be printed on both sides for maximum data content and readability. *See ordering description. Features and benefits Resistance to organic fluids, common fuels, lubricants and solvents 3:1 shrink ratio Operating temperature range -55C to +135C -67F to +275F Wide range of sizes for several wire and bundle diameters Minimum recovery temperature +135C +275F Maximum storage temperature +40C +104F Temperature rating Formulated for use in aerospace, rail and construction equipment Dot matrix and thermal transfer printable -- both print technologies meet all specifications and approvals listed Specifications/approvals Tyco Electronics RW 2519 TTDS-017 Military SAE-AMS-DTL-23053/6, Class 1 (material and performance requirements) SAE AS81531 4.6.2 MIL-STD-202 Method 215J Industry NF F 00 608 Category A and H Heat Shrink/Cable Markers Printer information 12 Tyco Electronics printer AM6310 (dot matrix) Tyco Electronics ribbon 1892BK04-RIBBON (dot matrix) T312M (thermal transfer) 1966-RIBBON Part numbering system D-SCE - 5K - 3.2 - 50 - S1- 4 Color Scoring (optional) Sleeve length (mm) Expanded inside diameter (mm) Large packaging (optional) Product family Catalog 1654227 Revised 04-07 www.tycoelectronics.com Dimensions not italicized are in millimeters while dimensions in inches are italicized. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 D-SCE Fluid resistant heat-shrinkable wire identification sleeves Ordering information 50mm (nom ) SOG-ER33-3 BT-M D SOG-ER32-3 BT-M d SOG-ER13-3 BT-M Available sizes and formats Inside diameter Ordering description D (min) As supplied mm inches d (max) After recovery mm inches Recommended use range mm inches D-SCE-1K- 2.4-50-<color> 2.39 0.094 0.79 0.031 0.81 - 1.90 D-SCE-1K- 3.2-50-<color> 3.18 0.125 1.07 0.043 1.11 - 2.66 0.044 - 0.105 D-SCE-1K- 4.8-50-<color> 4.75 0.187 1.57 0.063 1.75 - 4.06 0.069 - 0.160 0.032 - 0.075 D-SCE-1K- 6.4-50-<color> 6.35 0.250 2.11 0.084 2.31 - 5.46 0.091 - 0.215 D-SCE-1K- 9.5-50-<color> 9.53 0.375 3.18 0.125 3.47 - 8.12 0.137 - 0.320 D-SCE-1K-12-50-<color> 12.70 0.500 4.22 0.167 4.64 - 10.79 0.183 - 0.425 D-SCE-1K-18-50-<color> 19.05 0.750 6.35 0.250 6.99 - 16.25 0.275 - 0.640 D-SCE-1K-25-50-<color> 25.40 1.000 8.46 0.333 9.29 - 21.59 0.366 - 0.850 D-SCE-1K-38-50-<color>* 38.10 1.500 19.05 0.750 20.95 - 33.02 0.825 - 1.300 Wire and Harness ID Products Heat-Shrink/Cable Markers * 2:1 shrink ratio Total width as supplied 90.18 mm (3.550 inches) including tape and carrier width. Options Perforated score to produce multiple marker sleeves from each D-SCE sleeve. Standard Side scored Number of prescores 1 prescore 2 prescores 3 prescores Code S1 S2 S3 Package sizes Standard 1K - 1000 piece packages available for all D-SCE sizes Nonstandard Larger pack sizes are available. Please contact Tyco Electronics. Colors Standard White Code 9 4 Nonstandard Pink Blue Code 2L 6 Heat Shrink/Cable Markers Prescoring Yellow Ordering information: Specify product name, pack size, sleeve size, prescore, format and color. Ordering example: D-SCE-1K-6.4-50-S2-4 Catalog 1654227 Revised 04-07 www.tycoelectronics.com Dimensions not italicized are in millimeters while dimensions in inches are italicized. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 13 Wire and Harness ID Products Heat-Shrink/Cable Markers NBC-SCE Nuclear, biological, chemical resistant heat-shrinkable wire identification sleeves Tyco Electronics NBC-SCE is used to identify wire and cables where extreme resistance to cleaning solvents is needed. The markers are suitable for use in wire harness systems requiring high fluid resistance and resistance to the effects of nuclear, biological and chemical agent exposure and decontamination. The markers should be used with an appropriate transparent oversleeve whose ends are sealed with an appropriate epoxy adhesive. NBC-SCE marker sleeves are suitable for use in environments with temperatures from -55C to +225C (-67F to +437F). Features and benefits Permanent identification sleeves Computer-printable 2:1 shrink ratio NBC application with the appropriate adhesive and oversleeve Temperature rating Operating temperature range -55C to +225C -67F to +437F Minimum recovery temperature +200C +392F Maximum storage temperature +40C +104F Specifications/approvals Tyco Electronics RW 2514 Military SAE AS81531 4.6.2 MIL-STD-202 Method 215J Heat Shrink/Cable Markers Printer information 14 Tyco Electronics printer T312M (thermal transfer) Tyco Electronics ribbon TMS-RJS-RIBBON-4HT (thermal transfer) Part numbering system NBC-SCE - 1K-1/4 - 2.0 - S1 - 9 Color Scoring (optional) Sleeve length (inches) Expanded inside diameter (inches) Large packaging (optional) Product family Catalog 1654227 Revised 04-07 www.tycoelectronics.com Dimensions not italicized are in millimeters while dimensions in inches are italicized. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 NBC-SCE Nuclear, biological, chemical resistant heat-shrinkable wire identification sleeves Ordering information 50mm (nom ) SOG-ER33-3 BT-M D SOG-ER32-3 BT-M d SOG-ER13-3 BT-M Available sizes and formats Inside diameter Expanded Recovered D (minimum) d (maximum) Ordering description Recommended use range mm inches mm inches NBC-SCE-1K-1/8- 2.0<color> 3.43 0.135 1.59 0.062 1.75-2.66 0.069 -0.105 0.38 0.08 0.015 0.003 NBC-SCE-1K-1/4- 2.0<color> 6.35 0.250 3.18 0.125 3.81-5.46 0.150-0.215 0.38 0.08 0.015 0.003 NBC-SCE-1K-1/2- 2.0<color> 12.70 0.500 6.35 0.250 6.99-10.79 0.275-0.425 0.38 0.08 0.015 0.003 NBC-SCE-1K-3/4- 2.0<color> 19.05 0.750 9.53 0.375 10.16-16.25 0.400-0.640 0.38 0.08 0.015 0.003 NBC-SCE-1K-1- 2.0<color> 25.40 1.000 12.70 0.500 mm NBC-SCE-1K-1-1/2- 2.0<color> 38.10 1.500 19.05 0.750 Total width as supplied 90.18 mm (3.550 inches) including tape and carrier width. inches Recovered wall thickness mm inches 14.70-21.50 0.578-0.846 0.43 0.10 0.017 0.004 20.95-33.02 0.825-1.300 0.43 0.10 0.017 0.004 Wire and Harness ID Products Heat-Shrink/Cable Markers Options Prescoring Perforated score to produce multiple marker sleeves from each NBC-SCE sleeve. Number of prescores 1 prescore 2 prescores 3 prescores Code S1 S2 S3 Package sizes Standard 1000 piece packages available for all NBC-SCE sizes Colors Standard White Code 9 Heat Shrink/Cable Markers Ordering information: Please specify product name, pack size, sleeve size, prescore, format and color. Ordering example: NBC-SCE-1K-1/8-2.0-9 Catalog 1654227 Revised 04-07 www.tycoelectronics.com Dimensions not italicized are in millimeters while dimensions in inches are italicized. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 15 Wire and Harness ID Products Heat-Shrink/Cable Markers RPS Commercial grade heat-shrinkable wire identification sleeves RPS markers are heat shrinkable marking sleeves for wire and cable identification. When RPS is printed with Tyco Electronics recommended printers and ink ribbons, the marks remain legible, without any post printing process, even when exposed to abrasion, aggressive cleaning solvents, and industrial fluids. RPS markers are designed to meet the wire identification needs of commercial and industrial customers. Features and benefits Permanent identification sleeves Computer printable Excellent print performance Configured for ease of kitting Good chemical and solvent resistance 3:1 shrink ratio CSA Certified, UL Recognized Temperature rating Operating temperature range -30C to +105C -22F to +221F Minimum recovery temperature +85C +185F Maximum storage temperature +40C +104F Specifications/approvals Tyco Electronics Military RW 2510 TTDS-019 SAE AS81531 4.6.2 MIL-STD-202 Method 215J Industry UL Recognized - standard 224, file E35586 Heat Shrink/Cable Markers CSA Certified - file 31929 16 Printer information Tyco Electronics printer AM6310 (dot matrix) T208M (thermal transfer - low volume) T312M (thermal transfer) Tyco Electronics ribbon 1892BK04-RIBBON (dot matrix) TMS-101-RIBBON-4RPSCE (thermal transfer for T208M) TMS-RJS-RIBBON-4RPSCE (thermal transfer for T312M) Part numbering system RPS-1K-22-18/2.0-S1-9 Color Scoring (optional) Sleeve length (inches) US wire gauge size Pack size Product family Catalog 1654227 Revised 04-07 www.tycoelectronics.com Dimensions not italicized are in millimeters while dimensions in inches are italicized. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 RPS Commercial grade heat-shrinkable wire identification sleeves Ordering information 50mm (nom ) SOG-ER33-3 BT-M D SOG-ER32-3 BT-M d SOG-ER13-3 BT-M Available sizes and formats Inside diameter Ordering description D (min) as supplied d (max) after recovery Recommended use range mm inches mm inches RPS-1K-22-18/2.0- <color> 3.18 0.125 1.07 0.042 1.17 - 2.66 0.046 - 0.105 RPS-1K-18-12/2.0- <color> 4.75 0.187 1.57 0.062 1.75 - 4.06 0.069 - 0.160 RPS-1K-16-10/2.0- <color> 6.35 0.250 2.11 0.083 2.31 - 5.46 0.091 - 0.215 RPS-1K-8-4/2.0- <color> 9.53 0.375 3.18 0.125 3.47 - 8.12 0.137 - 0.320 mm inches RPS-1K-10-2/2.0- <color> 12.70 0.500 4.22 0.166 4.64 - 10.79 0.183 - 0.425 RPS-1K-6-250/2.0- <color> 19.05 0.750 6.35 0.250 6.99 - 16.25 0.275 - 0.640 RPS-1K-1-400/2.0- <color> 25.40 1.000 8.46 0.333 9.29 - 21.59 0.366 - 0.850 RPS-1K-400-1000/2.0- <color> 38.10 1.500 19.05 0.750 Total width as supplied 90.18 mm (3.550 inches) including tape and carrier width. 20.95 - 33.02 0.825 - 1.300 Wire and Harness ID Products Heat-Shrink/Cable Markers Options Prescoring Perforated score to produce multiple marker sleeves from each RPS sleeve. 1 prescore 2 prescores 3 prescores Code S1 S2 S3 Package sizes Standard 1K -1000 piece packs Nonstandard Smaller and larger pack sizes are available. Please contact Tyco Electronics. Colors Standard White Yellow Code 9 4 Heat Shrink/Cable Markers Number of prescores Ordering information: Specify product name, pack size, sleeve size, prescore, format and color. Ordering example: RPS-1K-22-18/2.0-S2-9 Catalog 1654227 Revised 04-07 www.tycoelectronics.com Dimensions not italicized are in millimeters while dimensions in inches are italicized. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 17 Wire and Harness ID Products Heat-Shrink/Cable Markers TMS-CCUV Heat-shrinkable UV protection sleeves TMS-CCUV clear heat shrinkable sleeves are designed for over protection of TMS System Six identification products, to give increased protection for permanent, long-term environmental exposure. The clear CCUV heat-shrinkable sleeves are formulated to combine a long-term barrier to the effects of ultra-violet, with tough resistance to abrasion and industrial fluids. They are available in packs which match the product sizes and pack quantities of TMS System Six heat-shrinkable identification sleeves and cable markers. The TMS CCUV sleeves are inherently low profile and use the action of heat-shrink to lock in place over the previously installed identification sleeves; except for cable markers which use a slide fitting CCUV sleeve which is held in place by the cable ties. The action of heat-shrink locking of the CCUV sleeves means there is no reliance on the long term performance of adhesives to hold the outer protection layer in place, and also gives the ability to accommodate cables and wire bundles which may be bent or flexed during use. Operating temperature range Features and benefits Heat Shrink/Cable Markers Temperature rating -55C to +150C -67F to 302F Minimum recovery temperature +150C +302F Maximum storage temperature +40C +104F Specifications/approvals Exceptional clarity and stability Tyco Electronics RW 2525 Added UV-resistant sleeves Military UL VW-1 rated SAE-AMS-DTL-23053/18, Class 2 Not printable Tough resistance to abrasion and industrial fluids Heat-shrink locking in place (no reliance on adhesives) Low profile Accommodates bent or flexing cable/wire bundles Can work as an NBC (nuclear, biological, chemical) System with NBC-SCE sleeves and appropriate adhesive Part numbering system TMS-CCUV- SLEEVE-1- X- 65mm Sleeve length (mm) Color (clear for all) Sleeve reference Loose sleeves CCUV sleeve Ordering information Before shrinking After shrinking over TMS cable sleeve TMS IDENT SLEEVE D 60mmto 65mm Wire dia. L After sliding over TMS cable marker After shrinking over TMS cable marker TMS CABLE MARKER TMS CABLE MARKER 32mm Cable dia. 18 Catalog 1654227 Revised 04-07 www.tycoelectronics.com Dimensions not italicized are in millimeters while dimensions in inches are italicized. 60mmto 65mm Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 TMS-CCUV Heat-shrinkable UV protection sleeves Available sizes and formats (For use with heat shrink sleeves) Inside diameter minimum mm inches Recovered diameter maximum mm inches TMS-CCUV-SLEEVE-1-X-65mm 65 3.20 0.125 1.60 0.063 1.80-2.80 0.071-0.110 2.40 0.094 N/A TMS-CCUV-SLEEVE-1-X-65mm 65 3.20 0.125 1.60 0.063 1.80-2.80 0.071-0.110 3.20 0.125 22-18 Sleeve length mm Wire size diameter mm inches Sleeve size expanded diameter TMS-SCE RPS mm inches US Wire gauge TMS-CCUV-SLEEVE-2-X-65mm 65 4.80 0.187 2.40 0.094 2.60-3.70 0.102-0.146 4.80 0.188 18-12 TMS-CCUV-SLEEVE-2-X-65mm 65 4.80 0.187 2.40 0.094 2.60-3.70 0.102-0.146 6.40 0.250 16-10 TMS-CCUV-SLEEVE-3-X-65mm 65 6.40 0.250 3.20 0.126 3.50-5.10 0.138-0.201 9.50 0.375 8-4 TMS-CCUV-SLEEVE-4-X-65mm 65 9.50 0.375 4.80 0.189 5.00-7.00 0.197-0.275 12.70 0.500 10-2 TMS-CCUV-SLEEVE-5-X-65mm 65 12.70 0.500 6.40 0.252 6.90-10.60 0.272-0.417 19.00 0.750 6-250 TMS-CCUV-SLEEVE-6-X-65mm 65 19.00 0.750 9.50 0.374 10.00-14.00 0.394-0.551 25.40 1.000 1-400 TMS-CCUV-SLEEVE-7-X-65mm 65 25.40 1.000 12.70 0.500 13.30-21.00 0.524-0.827 25.40 1.000 1-400 TMS-CCUV-SLEEVE-8-X-65mm 65 38.10 1.500 19.00 0.748 21.00-33.80 0.827-1.331 Some sleeve sizes may need to be recovered partially before CCUV sleeve is applied to protect them. 38.10 1.500 400-1000 (For use with cable markers to secure / protect without cable ties) Inside Recovered Ordering Sleeve diameter diameter description length minimum maximum mm inches mm inches TMS-CCUV-SLEEVE-4-X-65mm 65 9.50 0.375 4.80 0.189 TMS-CCUV-SLEEVE-5-X-65mm 65 12.70 0.500 6.40 0.252 TMS-CCUV-SLEEVE-6-X-65mm 65 19.00 0.750 9.50 0.374 TMS-CCUV-SLEEVE-7-X-65mm 65 25.40 1.000 12.70 0.500 (For use with cable markers to protect with cable ties) Inside Ordering Sleeve diameter description length minimum mm mm inches TMS-CCUV-SLEEVE-9-X-32mm 32 6.40 0.250 TMS-CCUV-SLEEVE-10-X-32mm 32 12.70 0.500 Wire size diameter mm inches 5.00-8.00 0.197-0.315 7.00-11.00 0.275-0.433 12.00-17.00 0.472-0.669 15.00-23.00 0.590-0.905 Recovered diameter maximum mm inches 3.20 0.126 6.40 0.252 Wire size diameter mm inches Marker height mm inches 6.40 0.250 6.40 0.250 12.70 0.500 12.70 0.500 Marker height mm inches N/A 6.40 0.250 N/A 12.70 0.500 (For use with NBC-SCE sleeves and adhesives sealing*) Inside Recovered Wire size Sleeve size diameter diameter diameter expanded diameter minimum maximum NBC-SCE NBC-SCE mm inches mm inches mm inches mm inches TMS-CCUV-SLEEVE-15 76 3.20 0.125 1.60 0.063 1.80-2.80 0.071-0.110 3.20 0.125 TMS-CCUV-SLEEVE-16 76 4.80 0.187 2.40 0.094 2.60-3.70 0.102-0.146 4.80 0.188 TMS-CCUV-SLEEVE-17 76 6.40 0.250 3.20 0.126 3.50-5.10 0.138-0.201 6.40 0.250 TMS-CCUV-SLEEVE-18 76 9.50 0.375 4.80 0.189 5.00-7.00 0.197-0.275 9.50 0.375 TMS-CCUV-SLEEVE-19 76 12.70 0.500 6.40 0.252 6.90-10.60 0.272-0.417 12.70 0.500 TMS-CCUV-SLEEVE-20 76 19.00 0.750 9.50 0.374 10.00-14.00 0.394-0.551 19.00 0.750 TMS-CCUV-SLEEVE-21 76 25.40 1.000 12.70 0.500 13.30-21.00 0.524-0.827 25.40 1.000 TMS-CCUV-SLEEVE-22 76 38.10 1.500 19.00 0.748 21.00-33.80 0.827-1.331 38.10 1.500 *For use with adhesives such as S-1255-04 and S-1264 please refer to RT1012 and RT1014 for specifications and adhesive details. Ordering description Sleeve length mm Options Prescoring Not available -- supplied as cut pieces. Package Sizes Standard 250 piece bags only Colors Standard Clear only Ordering information: Specify product name, loose sleeve, sleeve reference, color and sleeve length. Ordering example: For all Heat Shrink sleeves except NBC-SCE TMS-CCUV-SLEEVE-1-X- 65mm For NBC-SCE TMS-CCUV-SLEEVE-22 Catalog 1654227 Revised 04-07 www.tycoelectronics.com Dimensions not italicized are in millimeters while dimensions in inches are italicized. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Heat Shrink/Cable Markers Ordering description Wire and Harness ID Products Heat-Shrink/Cable Markers 19 Wire and Harness ID Products Heat-Shrink/Cable Markers CM-SCE Military grade tie-on cable marker tags CM-SCE markers are flat, rigid, non-adhesive labels that can be used to identify large cables and wire bundles in environments such as military and aerospace. Marker tags are applied to cables or wire bundles with cable ties. Print performance meets or exceeds the requirements of SAE AS81531 4.6.2 and MIL-STD-202. Features and benefits Side entry provides access to big size and wire bundles as well as retrofit and repair capability Highly flame-retardant Highly resistant to abrasion, mechanical abuses, fluids, lubricants and solvents Ease of use: markers can be easily removed from the carrier Easy installation: only standard cable tie-wraps are needed to install markers. No extra steps required Excellent print permanence when printing on the rough side of the marker Temperature rating Operating temperature range -55C to +135C -67F to +275F Specifications/approvals Tyco Electronics RW 2513 TTDS-021 Military Mark permanence: SAE AS81531 4.6.2 Solvent resistance: MIL-STD-202 Method 215J Industry UL MH26328 Group PG1S2 Heat Shrink/Cable Markers Printer information 20 Tyco Electronics printer AM6310 (dot matrix) T312M (thermal transfer) Tyco Electronics ribbon 1892BK04-RIBBON (dot matrix) (dot matrix) 1966-RIBBON (thermal transfer) Part numbering system CM-SCE - 2.5K - 1/ 4 - 4H-9 Color Tie-wrap holes Markable height of marker (inches) Pack size Product family Catalog 1654227 Revised 04-07 www.tycoelectronics.com Dimensions not italicized are in millimeters while dimensions in inches are italicized. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Wire and Harness ID Products Heat-Shrink/Cable Markers CM-SCE Military grade tie-on cable marker tags Ordering information Figure 1 CM-SCE- 1/4 INCH Available sizes and formats Ordering description Size Markable length Recommended use range mm inches /4 6.40 0.250 50.80 2.000 5.08 - 12.50 0.200 - 0.492 /4 6.40 0.250 50.80 2.000 5.08 - 12.50 0.200 - 0.492 /4 6.40 0.250 50.80 2.000 5.08 - 12.50 0.200 -0.492 /2 12.70 0.500 50.80 2.000 12.50 and up 0.492 and up /2 12.70 0.500 50.80 2.000 12.50 and up 0.492 and up /2 12.70 0.500 50.80 2.000 12.50 and up 0.492 and up /2 12.70 0.500 50.80 2.000 12.50 and up 0.492 and up CM-SCE- 1/4 -6H- <color> 1 CM-SCE- 1/4 -4H- <color> 1 CM-SCE -TP- 1/4 - 4H- <color>* 1 CM-SCE- 1/2 - 4H- <color> 1 CM -SCE-TP- 1/2 - 4H- <color>* 1 CM-SCE- /2 - 6H- <color> 1 CM -SCE-TP- 1/2 - 6H- <color>* 1 1 Markable height mm inches mm inches * for thermal transfer printing Tie-wrap holes 1 Four holes standard 1 Four holes Six holes Code 4H 6H Code Fx (substitute package size code for "x") /4 - inch tags /2 - inch tags Fanfold Package sizes Standard 250 pieces Colors Standard White Code 9 Nonstandard Yellow Code 4 Heat Shrink/Cable Markers Options Ordering information: Specify product name, markable height of marker, pack size, number of tie wraps and color. Ordering example: CM-SCE--2.5K -1/4 -4H-9 Catalog 1654227 Revised 04-07 www.tycoelectronics.com Dimensions not italicized are in millimeters while dimensions in inches are italicized. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 21 Wire and Harness ID Products Heat-Shrink/Cable Markers HTCM-SCE High temperature, low outgassing tie-on-cable marker tags HTCM-SCE markers are flat, rigid, non-adhesive labels that can be used to identify large cables and wire bundles in high temperature environments and outer space applications where low vacuum outgassing is required. Marker tags are applied to cables or wire bundles using cable ties. Print performance meets or exceeds the requirements of SAE AS81531 4.6.2 and MIL-STD-202. Features and benefits Side entry provides access to big size cables and wire bundles as well as retrofit and repair capability High temperature use Highly flame-retardant Highly resistant to abrasion, mechanical abuses, fluids, lubricants and solvents Low vacuum outgassing for outer space applications Ease of use: markers can be easily removed from the carrier Easy installation: only standard cable tie-wraps are needed to install markers. No extra steps required Excellent print permanence when printing on the rough side of the marker Temperature rating Operating temperature range -55C to +225C -67F to +437F Specifications/approvals Tyco Electronics Military RW 2524 TTDS-022 Mark permanence: SAE AS81531 4.6.2 Solvent resistance: MIL-STD-202 Method 215J Heat Shrink/Cable Markers Printer information 22 Tyco Electronics printer T312M (thermal transfer) Tyco Electronics ribbon TMS-RJS-RIBBON-4HT (thermal transfer) Part numbering system HTCM-SCE - 2.5K -1/ 4 - 4H-9 Color Tie-wrap holes Markable height of marker (inches) Pack size Product family Catalog 1654227 Revised 04-07 www.tycoelectronics.com Dimensions not italicized are in millimeters while dimensions in inches are italicized. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 HTCM-SCE High temperature, low outgassing tie-on-cable marker tags Ordering information Figure 1 HTCM-SCE- 1/4 INCH Available sizes and formats Ordering description Size Markable height Markable length Recommended use range mm inches /4 6.40 0.250 50.80 2.000 5.08 - 12.50 0.200 - 0.492 /2 12.70 0.500 50.80 2.000 12.50 and up 0.492 and up /2 12.70 0.500 50.80 2.000 12.50 and up 0.492 and up HTCM-SCE -TP- 1/4 - 4H- <color> 1 HTCM -SCE-TP- 1/2 - 4H- <color> 1 HTCM -SCE-TP- 1/2 - 6H- <color> 1 mm inches mm inches Wire and Harness ID Products Heat-Shrink/Cable Markers Tie-wrap holes 1 Four holes standard 1 Four holes Six holes Code 4H 6H Code Fx (substitute package size code for "x") /4 - inch tags /2 - inch tags Fanfold Package sizes Standard 250 pieces Colors Standard White Code 9 Nonstandard Yellow Code 4 Heat Shrink/Cable Markers Options Ordering information: Specify product name, markable height of marker, pack size, number of tie wraps and color. Ordering example: HTCM-SCE - 2.5K --1/4 --4H-9 Catalog 1654227 Revised 04-07 www.tycoelectronics.com Dimensions not italicized are in millimeters while dimensions in inches are italicized. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 23 Wire and Harness ID Products Heat-Shrink/Cable Markers HLX Low fire hazard tie-on cable marker tags HLX cable markers are made from zero halogen, low smoke, low toxicity, radiation cross-linked, UV stabilized polyolefin sheet, formed into punched organized cable markers on a paper carrier. They are used for identification of cables and wire bundles by computer-based printing onto markers. Markers are attached using cable ties. HLX markers are ideal for applications where limited fire hazard characteristics are necessary. Features and benefits Recommended for use where combustion of products may endanger personnel or place delicate electronics at risk Several printable heights and widths available Temperature rating Operating temperature range -40C to +105C -40F to +221F Specifications/approvals Tyco Electronics Military RW 2523 TTDS-013 SAE AS81531 4.6.2 MIL-STD-202 Method 215J Industry BS 4G 198 Part 3 ASTM D 2671 Heat Shrink/Cable Markers Printer information 24 Tyco Electronics printer T312M (thermal transfer) Tyco Electronics ribbon 1966-RIBBON Part numbering system HLX 150 YW 1 TS 033 B Pack size Printable width (mm) Format Scoring Color Marker height Product family Catalog 1654227 Revised 04-07 www.tycoelectronics.com Dimensions not italicized are in millimeters while dimensions in inches are italicized. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Ordering information Available sizes and formats Ordering description Marker dimensions (W x H) mm inches Printable area (W x H) mm inches Pack size TS HLX104<color>1<format>025B 45.00 x 10.40 1.800 x 0.400 25.00 x 10.40 1.000 x 0.400 1000 HLX104<color>1<format>033B 52.00 x 10.40 2.100 x 0.400 33.00 x 10.40 1.300 x 0.400 1000 HLX104<color>1<format>038B 58.00 x 10.40 2.300 x 0.400 38.00 x 10.40 1.500 x 0.400 1000 HLX104<color>1<format>050B 70.00 x 10.40 2.750 x 0.400 50.00 x 10.40 2.000 x 0.400 1000 HLX104<color>1<format>070B 90.00 x 10.40 3.500 x 0.400 70.00 x 10.40 2.750 x 0.400 1000 HLX150<color>1<format>025B 45.00 x 15.00 1.800 x 0.600 25.00 x 15.00 1.000 x 0.600 500 HLX150<color>1<format>033B 52.00 x 15.00 2.100 x 0.600 33.00 x 15.00 1.300 x 0.600 500 HLX150<color>1<format>038B 58.00 x 15.00 2.300 x 0.600 38.00 x 15.00 1.500 x 0.600 500 HLX150<color>1<format>050B 70.00 x 15.00 2.750 x 0.600 50.00 x 15.00 2.000 x 0.600 500 HLX150<color>1<format>070B 90.00 x 15.00 3.500 x 0.600 70.00 x 15.00 2.750 x 0.600 500 HLX203<color>1<format>025B 45.00 x 20.30 1.800 x 0.800 25.00 x 20.30 1.000 x 0.800 500 HLX203<color>1<format>033B 52.00 x 20.30 2.100 x 0.800 33.00 x 20.30 1.300 x 0.800 500 HLX203<color>1<format>038B 58.00 x 20.30 2.300 x 0.800 38.00 x 20.30 1.500 x 0.800 500 HLX203<color>1<format>050B 70.00 x 20.30 2.750 x 0.800 50.00 x 20.30 2.000 x 0.800 500 HLX203<color>1<format>070B 90.00 x 20.30 3.500 x 0.800 70.00 x 20.30 2.750 x 0.800 500 HLX253<color>1<format>025B 45.00 x 25.30 1.800 x 1.000 25.00 x 25.30 1.000 x 1.000 250 HLX253<color>1<format>033B 52.00 x 25.30 2.100 x 1.000 33.00 x 25.30 1.300 x 1.000 250 HLX253<color>1<format>038B 58.00 x 25.30 2.300 x 1.000 38.00 x 25.30 1.500 x 1.000 250 HLX253<color>1<format>050B 70.00 x 25.30 2.750 x 1.000 50.00 x 25.30 2.000 x 1.000 250 HLX253<color>1<format>070B 90.00 x 25.30 3.500 x 1.000 70.00 x 25.30 2.750 x 1.000 250 Options Prescoring Not available on these products - this should always be 1. Package sizes Standard B Colors Standard White Code WE YW Nonstandard Red Blue Code RD BE Format TS - Thermal transfer (reel/single sided) Printable width on marker 025 25mm (1") 033 33mm (1.3") 038 38mm (1.5") 050 50mm (2") 070 70mm (2.75") Yellow Wire and Harness ID Products HLX Low fire hazard tie-on cable marker tags Heat Shrink/Cable Markers Heat-Shrink/Cable Markers Ordering information: Specify product name, marker height, color, scoring option (always 1), format, printable width, and pack size. Ordering example: HLX150YW1TS033B Catalog 1654227 Revised 04-07 www.tycoelectronics.com Dimensions not italicized are in millimeters while dimensions in inches are italicized. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 25 Wire and Harness ID Products Heat-Shrink/Cable Markers HLX-NEL Narrow Edge Leading Low fire hazard tie-on cable marker tags HLX cable markers assembled in a Narrow Edge Leading (NEL) format for use in the T212M printer. Ideal for use in applications where the volume is small or wiring complexity is simple. These markers are manufactured from the same low fire hazard material as the standard HLX markers making them ideal in applications where low smoke, low toxicity and zero halogen are critical. These markers are attached to cables, bundles, and larger wire by cable ties. Features and benefits Recommended for use where combustion of products may endanger personnel or delicate electronics Ideal for low volume applications with T212M printer Two formats available Same material and approvals as standard HLX cable markers Ideal for pre or post termination assembly Temperature rating Operating temperature range -40C to +105C -40F to +221F Specifications/approvals Tyco Electronics RW 2529 TTDS-134 Industry UL 224 (clause 14) BS 4G 198 Part 3 ASTM D 2671 SAE AS81531 4.6.2 Heat Shrink/Cable Markers MIL-STD-202 Method 215K 26 Printer information Tyco Electronics printer T212M (thermal transfer only) Tyco Electronics ribbon 1966-RIBBON-4T200 Part numbering system HLX 125 YW 2 NEL 60 S Pack size Printable width (mm) Format Number of markers across width Color Marker height (mm) Product family Catalog 1654227 Revised 04-07 www.tycoelectronics.com Dimensions not italicized are in millimeters while dimensions in inches are italicized. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 HLX-NEL Narrow Edge Leading Low fire hazard tie-on cable marker tags (Cont'd) Ordering information Available sizes and formats Ordering description HLX125<color>4NEL60S HLX125<color>2NEL60S Marker dimensions (W x H) mm inches 80.00 x 12.50 80.00 x 12.50 3.15 x 0.49 3.15 x 0.49 Printable area (W x H) mm inches 60.00 x 10.50 60.00 x 10.50 Number of Markers Across 12.35 x 0.40 12.35 x 0.40 4 2 Options Package sizes Standard S Colors Standard White Yellow WE YW Colors NEL - Narrow edge leading Heat Shrink/Cable Markers Format Wire and Harness ID Products Heat-Shrink/Cable Markers Catalog 1654227 Revised 04-07 www.tycoelectronics.com Dimensions not italicized are in millimeters while dimensions in inches are italicized. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 27 Wire and Harness ID Products Heat-Shrink/Cable Markers HL Flame retardant tie-on cable marker tags Used to identify large cables and bundles either pre or posttermination, these flame retardant HL cable markers are suitable for use in environments with temperatures of -55C to +135C (-67F to +275F). The markers are easily applied with standard cable ties. HL markers are presented as organized markers assembled onto either a fanfolded or reeled paper carrier for ease of selection and kitting and are available in an extensive range of sizes. They are available with the surface designed for either dot matrix or thermal transfer printers. Features and benefits Recommended for use where de-termination of wires is not possible for large ID wires or wire bundles Heat resistant to +175C for 168 hours or +250C for 4 hours with no deterioration in properties Several printable widths and heights available Non-standard color options available Temperature rating Operating temperature range -55C to +135C -67F to +275F Specifications/approvals Tyco Electronics Military TTDS-037 SAE AS81531 4.6.2 MIL-STD-202 Method 215J Heat Shrink/Cable Markers Industry 28 ASTM D 2671 Printer information Tyco Electronics printer AM 6310 (dot matrix) Tyco Electronics ribbon 1892BK04 (dot matrix) T312M (thermal transfer) 1892BK03 (dot matrix -- high performance) TMS-RJS-RIBBON-4RPSCE Part numbering system HL 150 YW 1 NF 033 B Pack size Printable width (mm) Format Scoring Color Marker height Product family Catalog 1654227 Revised 04-07 www.tycoelectronics.com Dimensions not italicized are in millimeters while dimensions in inches are italicized. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Ordering information WEB WIDTH WIDTH HEIGHT Available sizes and formats Ordering description Marker dimensions (W x H) mm inches HL104<color>1<format>025B 45.00 x 10.40 1.800 x 0.400 Printable area (W x H) mm inches 25.00 x 10.40 1.000 x 0.400 Pack size NF TS 550 1000 HL104<color>1<format>033B 52.00 x 10.40 2.100 x 0.400 33.00 x 10.40 1.300 x 0.400 550 1000 HL104<color>1<format>038B 58.00 x 10.40 2.300 x 0.400 38.00 x 10.40 1.500 x 0.400 550 1000 HL104<color>1<format>050B 70.00 x 10.40 2.750 x 0.400 50.00 x 10.40 2.000 x 0.400 550 1000 HL104<color>1<format>070B 90.00 x 10.40 3.500 x 0.400 70.00 x 10.40 2.750 x 0.400 550 1000 HL150<color>1<format>025B 45.00 x 15.00 1.800 x 0.600 25.00 x 15.00 1.000 x 0.600 550 500 HL150<color>1<format>033B 52.00 x 15.00 2.100 x 0.600 33.00 x 15.00 1.300 x 0.600 550 500 HL150<color>1<format>038B 58.00 x 15.00 2.300 x 0.600 38.00 x 15.00 1.500 x 0.600 550 500 HL150<color>1<format>050B 70.00 x 15.00 2.750 x 0.600 50.00 x 15.00 2.000 x 0.600 550 500 HL150<color>1<format>070B 90.00 x 15.00 3.500 x 0.600 70.00 x 15.00 2.750 x 0.600 550 500 HL203<color>1<format>025B 45.00 x 20.30 1.800 x 0.800 25.00 x 20.30 1.000 x 0.800 550 500 HL203<color>1<format>033B 52.00 x 20.30 2.100 x 0.800 33.00 x 20.30 1.300 x 0.800 550 500 HL203<color>1<format>038B 58.00 x 20.30 2.300 x 0.800 38.00 x 20.30 1.500 x 0.800 550 500 HL203<color>1<format>050B 70.00 x 20.30 2.750 x 0.800 50.00 x 20.30 2.000 x 0.800 550 500 HL203<color>1<format>070B 90.00 x 20.30 3.500 x 0.800 70.00 x 20.30 2.750 x 0.800 550 500 HL253<color>1<format>025B 45.00 x 25.30 1.800 x 1.000 25.00 x 25.30 1.000 x 1.000 300 250 HL253<color>1<format>033B 52.00 x 25.30 2.100 x 1.000 33.00 x 25.30 1.300 x 1.000 300 250 HL253<color>1<format>038B 58.00 x 25.30 2.300 x 1.000 38.00 x 25.30 1.500 x 1.000 300 250 HL253<color>1<format>050B 70.00 x 25.30 2.750 x 1.000 50.00 x 25.30 2.000 x 1.000 300 250 HL253<color>1<format>070B 90.00 x 25.30 3.500 x 1.000 70.00 x 25.30 2.750 x 1.000 300 250 Options Prescoring Not available on these products - this should always be 1. Package sizes Standard B Colors Standard White Code WE YW Nonstandard Red Blue Code RD BE Format NF - Dot matrix printing (fanfold/single sided) Printable Width On Marker 025 25mm (1") 033 33mm (1.3") 038 38mm (1.5") 050 50mm (2") 070 70mm (2.75") Yellow TS - Thermal transfer (reel/single sided) Wire and Harness ID Products HL Flame retardant tie-on cable marker tags Heat Shrink/Cable Markers Heat-Shrink/Cable Markers Ordering information: Specify product name, marker height, color, scoring option (always 1), format, printable width, and pack size. Ordering example: HL150YW1NF033B Catalog 1654227 Revised 04-07 www.tycoelectronics.com Dimensions not italicized are in millimeters while dimensions in inches are italicized. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 29 Wire and Harness ID Products Heat-Shrink/Cable Markers NMX Flame retardant, light weight tie-on cable marker tags NMX cable marker tags are used for identification of cables and wire bundles by computer-based printing onto markers. The markers are attached using cable ties. They are ideal for aerospace and other cases where resistance to harsh environments and light weight are important. Features and benefits Extremely light weight Ultimate tensile strength and tear resistance Flame retardant Resistant to several avionics fluids, solvents and cleaners Dot matrix printable Available in white and yellow printable areas Temperature rating Operating temperature range -40C to +135C -40F to +275F Specifications/approvals Tyco Electronics TTDS-030 Military SAE AS81531 4.6.2, MIL-STD-202 Method 215J Industry DMS 2325, DMS 2409 Printer information AM6310 (dot matrix) Tyco Electronics ribbon 1892 BK01 (dot matrix) Part numbering system Heat Shrink/Cable Markers 30 Tyco Electronics printer NMX 25625 WE 2.5 Pack size Color Product size Product family Catalog 1654227 Revised 04-07 www.tycoelectronics.com Dimensions not italicized are in millimeters while dimensions in inches are italicized. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 NMX Flame retardant, light weight tie on cable marker tags Ordering information 3.500 2.500 0.625 Available sizes and formats Ordering description Label width mm NMX25625<color>2.5 63.50 Label height inches 2.500 mm 15.87 inches 0.625 Printable width mm 50.80 inches 2.000 Weight (g/10 pcs.) 2.5 Wire and Harness ID Products Heat-Shrink/Cable Markers Options Package sizes Colors Standard 2500 pieces per pack Nonstandard Larger pack sizes are available. Please contact Tyco Electronics. White Yellow WE YE Ordering information: Specify product name, product size, color and pack size. Heat Shrink/Cable Markers Ordering example: NMX25625WE2.5 Catalog 1654227 Revised 04-07 www.tycoelectronics.com Dimensions not italicized are in millimeters while dimensions in inches are italicized. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 31 Wire and Harness ID Products Heat-Shrink/Cable Markers MultiMark Strip and Carriers insert marker for post termination identification MultiMark is comprised of a polyolefin printed strip, which is inserted into a protective PVC carrier. The carrier can be applied to wires or cables pre-termination to allow post termination printed strip insertion or the strips can be replaced post termination when re-labeling is required. The PVC carrier protects the markers from dust and grime. These carriers are available in a number of sizes to cover a wide range of cable diameters. The printable strips are presented as organized markers assembled onto fanfolded paper carrier for ease of selection and kitting. The strips are available in a variety of lengths. Available for printing by dot matrix only. Features and benefits Suitable for post termination labeling and re-labeling Marker lengths 10mm to 30mm Clear carriers to fit cable diameters 1.8mm to 8.0mm Temperature rating Operating temperature range -45C to +70C -49F to 158F Specifications/approvals Tyco Electronics TTDS-003 Military MIL-STD 202 method 215J SAE-AS81531 4.6.2 Printer information Heat Shrink/Cable Markers Tyco Electronics Printer Tyco Electronics Ribbon 32 AM6310 (dot matrix) 1892BK04 (dot matrix) Part numbering system 082 5 99 19A Size (pack quantity and length) Color Format Number (height) Material Type Catalog 1654227 Revised 04-07 www.tycoelectronics.com Dimensions not italicized are in millimeters while dimensions in inches are italicized. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Ordering Information Type Format Number Color Size Pack Qty Marker length 082 = Polyolefin Label 5 = height 4mm 99 = White 01A 880 pcs. 15.0mm 94 = Yellow 03A 880 pcs. 30.0mm 05A 792 pcs. 10.0mm MultiMark . 02A 1760 pcs. 15.0mm 04A 1760 pcs. 30.0mm 06A 1848 pcs. 10.0mm 17A 1320 pcs. 20.0mm 18A 2640 pcs. 20.0mm 19A 3520 pcs. 15.0mm Legends Order Code Marker Length Marker Quantity Color 0.16 792 White 0.16 1848 White 4 0.16 880 White mm inches 08259905A 10.2 0.4 4 08259906A 10.2 0.4 4 08259901A 15.2 0.6 mm Height Pack inches 08259902A 15.2 0.6 4 0.16 1760 White 08259919A 15.2 0.6 4 0.16 3520 White 08259917A 20.2 0.8 4 0.16 1320 White 08259918A 20.2 0.8 4 0.16 2640 White 08259903A 30.2 1.2 4 0.16 880 White 08259904A 30.2 1.2 4 0.16 1760 White 08259405A 10.2 0.4 4 0.16 792 Yellow 08259406A 10.2 0.4 4 0.16 1848 Yellow 08259401A 15.2 0.6 4 0.16 880 Yellow 08259402A 15.2 0.6 4 0.16 1760 Yellow 08259419A 15.2 0.6 4 0.16 3520 Yellow 08259417A 20.2 0.8 4 0.16 1320 Yellow 08259418A 20.2 0.8 4 0.16 2640 Yellow 08259403A 30.2 1.2 4 0.16 880 Yellow 08259404A 30.2 1.2 4 0.16 1760 Yellow For Cable Size (mm2) Carrier Size Carriers Order Code For Cable Diameter (mm) Carrier Length Pack Quantity 0825001 1.8 - 4.0 0.5 - 1.5 0 ----- 50m coil 0825016 1.8 - 4.0 0.5 - 1.5 0 16 1200 pcs 0825032 1.8 - 4.0 0.5 - 1.5 0 32 600 pcs 0825201 2.6 - 6.0 1.5 - 6.0 2 ----- 30m coil 0825216 2.6 - 6.0 1.5 - 6.0 2 16 800 pcs 0825232 2.6 - 6.0 1.5 - 6.0 2 32 400 pcs 0825416 5.2 - 8.0 4.0 - 16.0 4 16 400 pcs 0825432 5.2 - 8.0 4.0 - 16.0 4 32 200 pcs Catalog 1654227 Revised 04-07 www.tycoelectronics.com Dimensions not italicized are in millimeters while dimensions in inches are italicized. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Wire and Harness ID Products MultiMark Strip and Carriers insert marker for post termination identification Heat Shrink/Cable Markers Heat-Shrink/Cable Markers 33 Wire and Harness ID Products Heat-Shrink/Cable Markers iMC Laser or hand writable marking clip Tyco Electronics iMC are marking clips designed for the identification of wires and can be permanently attached to wires, post termination. They can be quickly and simply clipped on the wire or cable. The polyester insert strip which can be printed using a laser printer or written by hand is then inserted in the clip. The marking clips are fastened without the need of cable ties. Features and benefits Protects against damp, dust and dirt iMC polyester strip can be marked with a laser printer or by hand Quick and flexible iMC strip is a dual color label with white on one side and yellow on the other Temperature rating Operating temperature 0 to +80C (+32 to +176F) Printer Information Standard laser printer with auto/manual sheet feed Heat Shrink/Cable Markers Contact Tyco Electronics Electronics Identification for more information. 34 Catalog 1654227 Revised 04-07 www.tycoelectronics.com Dimensions not italicized are in millimeters while dimensions in inches are italicized. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 iMC Laser or hand writable marking clip Ordering Information Marker Clips Ordering Description Clips per pack Recommended Use Range mm (inches) Typical Cross Section mm2 Dimensions Length x Width mm (inches) iMC02 500 0.75 - 2.00 (0.03 - 0.08) 0.20 - 0.75 15 x 7.8 (0.59 - 0.31) iMC04 500 1.75 - 3.25 (0.07 - 0.13) 0.50 - 1.50 15 x 7.8 (0.59 - 0.31) iMC06 500 3.00 - 4.50 (0.12 - 0.18) 1.50 - 6.00 15 x 9.5 (0.59 - 0.37) iMC08 500 4.25 - 6.00 (0.17 - 0.24) 6.00 - 10.00 15 x 9.5 (0.59 - 0.37) Legend Strips (A4 Sheets) Labels per sheet 560 Color 1 side White/1 side Yellow Label Size Height x Width mm (inches) 6.4 x 12.2 (0.25 x 0.48) Heat Shrink/Cable Markers Ordering Description iMCA4ES-4/9 Wire and Harness ID Products Heat-Shrink/Cable Markers Catalog 1654227 Revised 04-07 www.tycoelectronics.com Dimensions not italicized are in millimeters while dimensions in inches are italicized. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 35 Wire and Harness ID Products Heat-Shrink/Cable Markers iKC/iKB Laser or hand writable cable clip Tyco Electronics iKC/iKB are cable clips designed for the identification of wires and cables in rough, damp and dusty environments. The legend strip (iKB) with the printable information is embedded in the cable clip (iKC) and therefore has all- round protection. The cable clips are fastened on using cable ties. . Features and benefits Protects against damp, dust and dirt iKB legend strip marked with a laser printer or by hand Universal application on various cable diameters iKB legend strip is a dual color label with white on one side and yellow on the other Temperature rating Operating temperature -26C to +130C (-15F to +266F) Printer Information Standard laser printer with auto/manual sheet feed Heat Shrink/Cable Markers Contact Tyco Electronics Electronics Identification for more information. 36 Catalog 1654227 Revised 04-07 www.tycoelectronics.com Dimensions not italicized are in millimeters while dimensions in inches are italicized. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Wire and Harness ID Products Heat-Shrink/Cable Markers iKC/iKB Laser or hand writable cable clip Ordering Information Cable Clips iKC Clips per pack Dimensions L x W mm (inches) iKC01 25 44 x 21 (1.73 - 0.83) iKC02 25 34 x10.5 (1.34 - 0.41) iKC03 25 68 x 10.5 (2.68 x - 0.41) Ordering Description Labels per sheet Color Label Size H x W mm (inches) iKB01P-9/4 60 1 side White 16 x 40 (0.63 x 1.57) Heat Shrink/Cable Markers Ordering Description Ordering Information Legend Strips iKB (A4 Sheets) 1 side Yellow iKB02P-9/4 240 1 side White 6.2 x 30 (0.24 x 0.41) 1 side Yellow iKB03P-9/4 120 1 side White 6.2 x 64 (0.24 x 0.41) 1 side Yellow Catalog 1654227 Revised 04-07 www.tycoelectronics.com Dimensions not italicized are in millimeters while dimensions in inches are italicized. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 37 Wire and Harness ID Products Performance Labels VF/NPVF/VF-130 Tedlar(R) color coding tape and labels This polyvinyl fluoride material is designed for use as a wire/cable marker, label and wrap-around in the general aviation industry. The product is ideal for a variety of harsh chemical environments and where non-igniting/self-extinguishing properties are a necessity. It is available in several application-defined types and sizes and can be used with various printing technologies. VF series The VF series of Tedlar(R) products is specifically designed for wire/cable labeling. The product is dot matrix or thermal transfer printable and is available in several continuous and die-cut formats to fit a wide range of cables/cable bundles. The product meets all the requirements of the BMS 13-47, DMS 2359 and GAT100BA specifications, the benchmarks for pressure-sensitive wrap-around labels in the aerospace industry. NPVF Series The NPVF Tedlar (R) is a non-printable, 12.7mm (0.5") wide and 30.48m (100') long continuous tape designed for use as a color-coded identifier for cables/cable bundles. Besides identifying the bundle this product is wrapped around, it also provides strength and rigidity to the bundle. The product has all the features of the VF series of Tedlar (R) products except for printability. VF-130 Series The VF-130 series is a range of clear non-printable Tedlar(R) tapes designed for use as an over laminate on wires/bundle identifiers where additional UV protection is required. These tapes can be used over various types of identifiers like wrap around labels, heat-shrink labels, tie-on cable labels and pressure-sensitive markers. Temperature rating Operating temperature range VF and NPVF -40C to +130C -40F to +266F VF-130 -40C to +105C -40F to +221F VF-130 -40C to 105C -40F to 221F Specifications/approvals Tyco Electronics TTDS-005 (TTVF/DMVF) Military MIL-M-87958 DMS 2359 Industry BMS-13-47 BACT 19 GAT100BA TTDS-004 (NPVF) Printer information Performance Labels Features and benefits 38 Resists water, oil, conventional cleaning agents, and oil based solvents Filters UV light Exhibits high degree of resistance to aging Meets the requirements of MIL-M-87958 Available in several colors to facilitate color-coding and clear for over laminating Tyco Electronics printer AM6310 (dot matrix) T308S* (thermal transfer) *Size dependent. Contact Tyco Electronics. Tyco Electronics ribbon 1892BK01 (dot matrix) 1330-3300-10* (thermal transfer) * Alternative printers and ribbons are available for special applications. Contact Tyco Electronics Electronics Identification for more information. Part numbering system (Continuous) TTVF 200 YW-100 Length (feet) Color Width (inches) Product family Part numbering system (Die-Cut) TTVF 6004 GN 2.5 Pack size Color Label size (W x H) Product family Catalog 1654227 Revised 04-07 www.tycoelectronics.com Dimensions not italicized are in millimeters while dimensions in inches are italicized. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 VF/NPVF/VF-130 Tedlar(R) color coding tape and labels Ordering information Continuous NPVF Die-Cut LABEL WIDTH ROLL WIDTH Polyvinyl Fluoride VF Tedlar (R) - Continuous Labels Ordering Printer Label width description type mm inches Label length Meters Feet Quantity per pack <format>VF050<color> -180 DM/TT 12.70 0.500 54.86 180 Continuous <format>VF075<color> -100 DM/TT 19.05 0.750 30.48 100 Continuous <format>VF100<color> -100 DM/TT 25.40 1.000 30.48 100 Continuous <format>VF150<color> -100 DM/TT 38.10 1.500 30.48 100 Continuous <format>VF200<color> -100 DM/TT 50.80 2.000 30.48 100 Continuous <format>VF300<color> -100 DM/TT 76.20 3.000 30.48 100 Continuous <format>VF400<color> -100 DM/TT 101.60 4.000 30.48 100 Continuous Polyvinyl Fluoride VF Tedlar (R) - Die-Cut Labels Ordering Printer description type Label width mm inches Label height mm inches Wire and Harness ID Products Performance Labels Quantity per pack <format>VF1029<color>2.5 DM/TT 25.40 1.000 73.66 2.900 2500 <format>VF1079<color>1 DM/TT 25.40 1.000 200.66 7.900 1000 <format>VF1529<color>2.5 DM/TT 38.10 1.500 73.66 2.900 2500 <format>VF1679<color>1 DM/TT 40.64 1.600 200.66 7.900 1000 <format>VF3015<color>1 DM/TT 76.20 3.000 38.10 1.500 1000 <format>VF3509<color>2.5 DM/TT 88.90 3.500 22.86 0.900 2500 <format>VF6004<color>2.5 DM/TT 152.40 6.000 10.16 0.400 2500 Options Format (TT) Thermal transfer printable Colors Yellow White Red Blue Green Violet Pink Code YW WE RD BE GN VT PK Polyvinyl Fluoride NPVF Tedlar (R) - Color coding tape Ordering Printer Roll width description type mm inches NPVF050XX-100 N/A Label length Meters Feet 30.48 100 0.500 12.70 Quantity per pack Continuous Options Colors Yellow White Red Blue Green Violet Pink Black Brown Orange Grey Gold Code YW WE RD BE GN VT PK BK BN OE GY GD Polyvinyl Fluoride VF-130 Tedlar(R) - Over laminate tapes Ordering Printer Label width description type Color mm inches NPVF150CL -100 N/A Clear 38.10 1.500 NPVF200CL-100 N/A Clear 50.80 2.000 NPVF300CL-100 N/A Clear 76.20 3.000 NPVF400CL -100 N/A Clear 101.60 4.000 Catalog 1654227 Revised 04-07 www.tycoelectronics.com Dimensions not italicized are in millimeters while dimensions in inches are italicized. Label length Meters Feet 30.48 100 30.48 100 30.48 100 30.48 100 Dimensions are shown for reference purposes only. Specifications subject to change. Quantity per pack Continuous Continuous Performance Labels (DM) Dot matrix printable Continuous Continuous USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 39 Wire and Harness ID Products Performance Labels RMK-6 Computer printable epoxy coated labels RMK-6 is a computer printable labelstock with outstanding fluid and abrasion resistance, designed to be printed by impact dot matrix printers. When heat-cured after printing, its unique heat reactive epoxy surface "locks in" the image to combine the versatility and convenience of on-site printing with performance to meet the toughest conditions. A high performance acrylic adhesive ensures simple installation while maintaining excellent adhesion. Typical applications are rating plate labels, component identification, and pipe and cable wraparound markers. Outdoor use is not recommended. Features and benefits Printable by dot matrix printers Excellent fluid and abrasion resistance without an overlay High performance acrylic adhesive Low fire hazard properties Indoor use only Temperature rating Operating temperature range Wiring marking Panel marking Excursion temperature Performance Labels Storage conditions 40 -40C to +85C -40F to +185F -40C to +105C -40F to +221F +200C for 2 hours Unopened 12 months at temperatures not exceeding +35C (+95F). Opened 6 months at temperatures not exceeding +25C (+77F) and 80% relative humidity Curing 4 - 6 minutes at 160C in an air circulating oven. Specifications/approvals Tyco Electronics Industry RW 2520 TTDS-032 UL MH17259 Group PGGU2 Printer information Tyco Electronics printer AM6310 (dot matrix) Tyco Electronics ribbon 1892BK04 (dot matrix) Part numbering system RMK6 8.5 Label height (mm) Product family Catalog 1654227 Revised 04-07 www.tycoelectronics.com Dimensions not italicized are in millimeters while dimensions in inches are italicized. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Wire and Harness ID Products Performance Labels RMK-6 Computer printable epoxy coated labels Ordering information Matrix removed 12.7 W 127-0.1 (per 10 pitches) H 4.0 Dia. hole 9-1 59.8-1 65-1 RayMark coating Pressure sensitive acrylic adhesive 0.16 Nom . White polyester film Release paper carrie r Available sizes and formats Ordering description Label height mm Label width mm Package quantity Labels per pack 10000 RMK6-4.2 4.20 50.80 RMK6-8.5 8.50 50.80 5000 RMK6-12.7 12.70 50.80 3000 RMK6-17.0 17.00 50.80 2500 RMK6-25.4 25.40 50.80 1500 RMK6-55.0 55.00 50.80 750 RMK6-WM* * 50.80 *An uncut version for wraparound markers. Spool length = 40 meters. * Options Standard White Performance Labels Colors Catalog 1654227 Revised 04-07 www.tycoelectronics.com Dimensions not italicized are in millimeters while dimensions in inches are italicized. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 41 Wire and Harness ID Products Performance Labels RMK Computer printable epoxy coated labels in a sheet form RMK is a computer printable labelstock with outstanding fluid and abrasion resistance, designed to be printed by sheet fed inkjet printers. When heat-cured after printing its unique heat reactive epoxy surface "locks in" the image to combine the versatility and convenience of on-site printing with performance to meet the toughest conditions. A high performance acrylic adhesive ensures simple installation while maintaining excellent adhesion. A wide range of label sizes are available, supplied in A4 sheets for feeding through standard inkjet printers. Typical applications are replacement of engraved metal or plastic labels, signs, rating plate labels, and color coding. Features and benefits High performance label material High performance acrylic adhesive A4 format sheet Printable by color inkjet printers with sheet feed Outstanding fluid and abrasion resistance without an overlay Wiring marking -40C to +85C -40F to +185F Low fire hazard properties Panel marking -40C to +105C -40F to +221F Indoor use only Temperature rating Operating temperature range Excursion temperature Storage conditions +200C for 2 hours Unopened 12 months at temperatures not exceeding +35C (+95F) Opened 6 months at temperatures not exceeding +25C (+77F) and 80% relative humidity Curing 4 - 6 minutes at 160C in an air circulating oven. Specifications/approvals Tyco Electronics Industry RW 2518 MH17259 Group PGGU2 UL Printer information Performance Labels Various color inkjet printers can be used depending on the application, mainly HP800 or HP900 series if available. 42 Tyco Electronics recommended printer Tyco Electronics recommended inks Epson R340/R320 Standard Epson For further advice on possible alternative printers, contact Tyco Electronics. Part numbering system RMK-18x35- A4 Sheet size Label size (mm) Product family Catalog 1654227 Revised 04-07 www.tycoelectronics.com Dimensions not italicized are in millimeters while dimensions in inches are italicized. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 RMK Computer printable epoxy coated labels in a sheet form Ordering information 210 mm W 297 mm H 188 mm usable r = 1 mm to 3 mm (size dependent) A4 sheet dimensions Label height mm Label dimensions Label width mm Labels per sheet RMK-6x20-A4 6 20 224 RMK-9x25-A4 9 25 132 RMK-10x19-A4 10 19 160 RMK-11x40-A4 11 40 72 RMK-18x20-A4 18 20 96 RMK-18x25-A4 18 25 72 RMK-18x35-A4 18 35 48 RMK-18x50-A4 18 50 36 RMK-25x30-A4 25 30 45 RMK-25x35-A4 25 35 36 RMK-25x50-A4 25 50 27 RMK-25x70-A4 25 70 10 RMK-25x75-A4 25 75 18 RMK-25x100-A4 25 100 10 RMK-28x40-A4 28 40 32 RMK-30x13-A4 30 13 88 RMK-30x25-A4 30 25 48 RMK-30x70-A4 30 70 14 RMK-35x75-A4 35 75 12 RMK-50x13-A4 50 13 50 RMK-50x25-A4 50 25 30 RMK-50x100-A4 50 100 5 RMK-75x150-A4 75 150 3 RMK-87x13-A4 87 13 33 18 RMK-87x25-A4 87 25 RMK-150x150-A4 150 150 1 RMK-170x13-A4 170 13 11 RMK-170x25-A4 170 25 6 RMK-190x30-A4 190 30 5 RMK-200x13-A4 200 13 10 RMK-250x13-A4 250 13 11 RMK-250x25-A4 250 25 RMK-UNCUT-A4 Uncut Catalog 1654227 Revised 04-07 www.tycoelectronics.com Dimensions not italicized are in millimeters while dimensions in inches are italicized. Performance Labels Available sizes and formats Ordering description r 6 50 sheets Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 Wire and Harness ID Products Performance Labels South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 43 Wire and Harness ID Products Performance Labels TTP Continuous polyester for decals The system is designed for applications that require a highdurability label with all the features of a "silk-screened" label, only without the cost, time and inflexibility involved in obtaining a silk-screened product. The product utilizes high performance polyester with permanent acrylic adhesive. It is thermal transfer printable with all the capabilities of graphics, barcodes, logos and several fonts. The product is available in several colors although white, clear and metalized silver are available as standard. Typical applications include panel labels, fascias, decalcomanias and asset identification and rating plates. Typical industry use includes aerospace, defense, electronics and infrastructure. Features and benefits Efficient solution for expensive silk-screen printing Available in continuous format Several widths and colors available Interior and exterior aircraft use including flight entertainment and deck instrumentation Thermal transfer printable Printable in any combination of material and ribbon colors Temperature rating Operating temperature range Clear, White -40C to +150C -40F to +302F Metalized, and colors Specifications/approvals Tyco Electronics TTDS- 031 Military A-A-59485 (accelerated weather resistance and salt spray) Industry GAT 100BB UL 17292 Group PGJI2 (polywhite) Printer information T312S (thermal transfer) Tyco Electronics ribbon 1330-0607-10 (thermal transfer) Part numbering system Performance Labels 44 Tyco Electronics printer TTP 200 CL-10 Length Color Label width (inches) Product name Catalog 1654227 Revised 04-07 www.tycoelectronics.com Dimensions not italicized are in millimeters while dimensions in inches are italicized. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Wire and Harness ID Products Performance Labels TTP Continuous polyester for decals Ordering information LABEL WIDTH Available sizes and formats Ordering description Label width mm inches Roll length meters feet Quantity per pack TTP200<color>-10 50.80 2.000 30.48 100 TTP300<color>-10 76.20 3.000 30.48 100 Continuous Continuous TTP400<color>-10 101.60 4.000 30.48 100 Continuous TTP600<color>-10 152.40 6.000 30.48 100 Continuous Note: Use TTPA prefix for high tack adhesive Options Colors Colors Colors Standard Clear White Metalized silver Code CL WE MP Non Standard Red Green Blue Orange Code RD GN BE OE Non Standard Black Yellow Code BK YW Performance Labels Ordering example: TTP400WE-10 or TTPA400WE (for the high tack adhesive variant) Catalog 1654227 Revised 04-07 www.tycoelectronics.com Dimensions not italicized are in millimeters while dimensions in inches are italicized. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 45 Wire and Harness ID Products Performance Labels HPK Thermal transfer printable panel labels Tyco Electronics HPK is a semi-rigid, heavy gauge polypropylene film with a permanent acrylic adhesive, designed to permanently identify control panel components and racks, as well as general labeling applications that require a high performance heavy gauge material. They offer excellent abrasion resistance, and adhere to most smooth surfaces including bare and painted metal. For reliable print performance and durability, use with Tyco Electronics 1330-0607 ribbon. Features and benefits Self-adhesive backing for quick and easy fixing Thermal transfer printable Recommended for indoor use Resistant to common fluids, lubricants and solvents Temperature rating Operating temperature range -29C to +80C -20F to +176F 10C +50F Minimum recovery temperature Specifications/approvals Tyco Electronics TTDS- 008 Printer information Tyco Electronics printer T308S (thermal transfer) Tyco Electronics ribbon 1330-0607-10 (thermal transfer) Part numbering system HPK 02 WE 1 050 Performance Labels Label width (mm) Scoring (optional) Color Label height Product family 46 Catalog 1654227 Revised 04-07 www.tycoelectronics.com Dimensions not italicized are in millimeters while dimensions in inches are italicized. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 HPK Thermal transfer printable panel labels Ordering information Available sizes and formats Ordering Labels description across (A) Label width (B) Label height (C) Vertical repeat (D) Web width inches mm inches mm inches HPK02WE1050 1 50.80 2.000 5.10 0.200 8.30 0.325 57.20 HPK04WE1050 1 50.80 2.000 10.20 0.400 13.30 0.525 57.20 2.250 HPK06WE1050 1 50.80 2.000 15.20 0.600 18.40 0.725 57.20 2.250 mm mm inches 2.250 HPK08WE1050 1 50.80 2.000 20.30 0.800 23.50 0.925 57.20 2.250 HPK10WE1050 1 50.80 2.000 25.40 1.000 28.60 1.125 57.20 2.250 Wire and Harness ID Products Performance Labels Options Prescoring Perforated score to produce multiple labels from each HPK label. Number of prescores 0 prescores 1 prescore Code 1 2 Package size Standard 1000 piece pack Color Standard White Ordering information: Specify product name, product size and prescores. Performance Labels Ordering example: HPK02WE1050 Catalog 1654227 Revised 04-07 www.tycoelectronics.com Dimensions not italicized are in millimeters while dimensions in inches are italicized. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 47 Wire and Harness ID Products Self-Laminating Labels SB Thermal transfer printable self-laminating labels Tyco Electronics SB is a thermal transfer printable, translucent vinyl film with a permanent acrylic adhesive, supplied with a white printable area, which is over-laminated upon application with the translucent portion of the label. This `self-laminating' feature protects the printed area from exposure to oil, solvents, water and abrasion. SB labels offer excellent conformability to round, irregular or flexible surfaces. Ideal for wire and cable identification, including flat ribbon cables that are subject to repeated bending, they are UL Listed. For reliable print performance and durability, use with Tyco Electronics TMS-RJS-RIBBON-4RPSCE series ribbon. Features and benefits Manufactured with a white coated area for printing, and with a clear tail to wind around a wire or cable over the printed surface to seal out impurities that would cause the label to become illegible Protects printed information from chemicals and frequent handling Designed to withstand exposure to oil, solvents, and water Temperature rating Operating temperature range -40C to +80C -40F to +176F Specifications/approvals Tyco Electronics TTDS- 052 Industry UL MH17001 (Group PGDQ2) MH17292 (Group PGJI2) Self-Laminating Labels Printer information 48 Tyco Electronics printer T308S* (thermal transfer) Tyco Electronics ribbon TMS-RJS-RIBBON-4RPSCE* (thermal transfer) * Alternative printers and ribbons are available for special applications. Contact Tyco Electronics Identification for more information. Part numbering system SB 100 225 WE 5 Pack size Color Label length Label width Product family Catalog 1654227 Revised 04-07 www.tycoelectronics.com Dimensions not italicized are in millimeters while dimensions in inches are italicized. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Ordering information Available sizes and formats Ordering Package Labels description quantity across Max.Cable OD inches mm (A) Label height mm inches (B) Label mm inches (C) Printable repeat mm inches (D) Horizontal repeat mm inches (E) Vertical width mm inches (F) Web SB050100WE10 10,000 5 5.1 .20 12.70 0.500 25.40 1.000 8.50 0.330 16.80 0.600 31.00 1.222 86.00 3.384 SB050143WE10 10,000 5 7.6 .30 12.70 0.500 36.50 1.437 12.70 0.500 16.80 0.662 42.20 1.661 86.00 3.384 SB075094WE10 10,000 4 7.6 .30 19.10 0.750 23.90 0.940 9.50 0.375 20.30 0.800 28.60 1.125 85.10 3.350 SB080150WE10 10,000 4 7.6 .30 20.30 0.800 38.10 1.500 12.70 0.500 22.90 0.900 44.50 1.750 94.90 3.736 mm inches SB100143WE5 5,000 3 7.6 .30 25.40 1.000 36.50 1.437 12.70 0.500 27.90 1.100 42.20 1.661 87.30 3.436 SB100225WE5 5,000 3 12.2 .48 25.40 1.000 57.20 2.250 19.10 0.750 27.90 1.100 66.70 2.625 87.30 3.436 SB100375WE2.5 2,500 3 22.4 .88 25.40 1.000 95.30 3.750 25.40 1.000 27.90 1.100 101.60 4.000 87.30 3.436 SBH100375WE2.5 2,500 1* 22.4 .88 25.40 1.000 95.30 3.750 25.40 1.000 N/A 28.60 1.125 100.30 3.950 N/A SB100594WE1 1,000 3 35.6 1.4 25.40 1.000 151.00 5.940 38.10 1.500 27.90 1.100 158.80 6.250 87.30 3.436 SB100743WE1 1,000 3 35.6 1.4 25.40 1.000 188.90 7.437 38.10 1.500 27.90 1.100 195.30 7.688 87.30 3.436 SB190319WE2.5 2,500 2 12.2 .48 48.30 1.900 81.00 3.190 19.10 0.750 50.80 2.000 87.40 3.440 105.10 4.138 SB190594WE1 1,000 2 35.6 1.4 48.30 1.900 151.00 5.940 38.10 1.500 50.80 2.000 158.80 6.250 105.10 4.138 SB200143WE2.5 2,500 2 7.6 .30 50.80 2.000 36.50 1.437 12.70 0.500 50.80 2.000 42.20 1.661 107.60 4.236 SB200225WE2.5 2,500 2 12.2 .48 50.80 2.000 57.20 2.250 19.10 0.750 50.80 2.000 66.70 2.625 107.60 4.236 SB200375WE2.5 2,500 2 22.4 .88 50.80 2.000 95.30 3.750 25.40 1.000 53.30 2.100 101.60 4.000 111.40 4.386 SB200743WE1 1,000 2 *One label across rotated format. 48.3 1.9 50.80 2.000 188.90 7.437 38.10 1.500 53.30 2.100 195.30 7.688 110.10 4.336 Options Colors Standard White with clear tail Non-Standard Red, Orange, Yellow, Green, Blue, Violet, with clear tail Catalog 1654227 Revised 04-07 www.tycoelectronics.com Dimensions not italicized are in millimeters while dimensions in inches are italicized. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Wire and Harness ID Products SB Thermal transfer printable self-laminating labels Self-Laminating Labels Self-Laminating Labels 49 Wire and Harness ID Products Self-Laminating Labels SP Self-laminating polyester labels Tyco Electronics "SP" is a thermal transfer printable, low profile translucent polyester film with a permanent acrylic adhesive. Supplied with a white printable area, which is over-laminated upon application with the translucent portion of the label. This 'self-laminating' feature better protects the printed area from exposure to oil, solvents, water and abrasion. Excellent conformability to round, irregular or flexible surfaces. Ideal for wire & cable identification, including flat ribbon cables that are subject to repeated bending. For reliable print performance and durability, use with Tyco Electronics 1330-0607 ribbon. Features and benefits Self laminating feature for protection and mark permanence of the printed area of the label Designed to better withstand exposure to oil, solvents, and water Low profile design for conformability to wires and cables High tack adhesive makes SP suitable for flagging and wrapping around thin gauge wires Adhesive Permanent rubber-based Service temperature -40C to +150C -40F to +302F Recommended printer T308S* Recommended ribbon 1330-0607-10* *Alternative printers and ribbons are available for special applications. Contact Tyco Electronics Identification for more information. Part numbering system SP 100 225 WE 5 Self-Laminating Labels Pack size Color Label length Label width Product family 50 Catalog 1654227 Revised 04-07 www.tycoelectronics.com Dimensions not italicized are in millimeters while dimensions in inches are italicized. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 SP Self-laminating polyester labels Ordering information Available sizes and formats Ordering Package description quantity Labels across Max. Cable (A) Label OD width mm inches mm inches (B) Label height mm inches (C) Printable height mm inches (D) Horizontal repeat mm inches (E) Vertical repeat mm inches (F) Web width mm inches SP050100WE10 10,000 5 5.1 .20 12.70 0.500 25.40 1.000 8.50 0.330 16.80 0.600 31.00 1.222 86.00 3.384 SP050143WE10 10,000 5 7.6 .30 12.70 0.500 36.50 1.437 12.70 0.500 16.80 0.662 42.20 1.661 86.00 3.384 SP075094WE10 10,000 4 7.6 .30 19.10 0.750 23.90 0.940 9.50 0.375 20.30 0.800 28.60 1.125 85.10 3.350 SP080150WE10 10,000 4 7.6 .30 20.30 0.800 38.10 1.500 12.70 0.500 22.90 0.900 44.50 1.750 94.90 3.736 SP100143WE5 5,000 3 7.6 .30 25.40 1.000 36.50 1.437 12.70 0.500 27.90 1.100 42.20 1.661 87.30 3.436 SP100225WE5 5,000 3 12.2 .48 25.40 1.000 57.20 2.250 19.10 0.750 27.90 1.100 66.70 2.625 87.30 3.436 SP100375WE2.5 2,500 3 22.4 .88 25.40 1.000 95.30 3.750 25.40 1.000 27.90 1.100 101.60 4.000 87.30 3.436 SP100594WE1 1,000 3 35.6 1.4 25.40 1.000 151.00 5.940 38.10 1.500 27.90 1.100 158.80 6.250 87.30 3.436 SP200225WE2.5 2,500 2 12.2 .48 50.80 2.000 57.20 2.250 19.10 0.750 50.80 2.000 66.70 2.625 107.60 4.236 SP200375WE2.5 2,500 2 22.4 .88 50.80 2.000 95.30 3.750 25.40 1.000 53.30 2.100 101.60 4.000 111.40 4.386 Wire and Harness ID Products Self-Laminating Labels Options Standard White with clear tail Self-Laminating Labels Colors Catalog 1654227 Revised 04-07 www.tycoelectronics.com Dimensions not italicized are in millimeters while dimensions in inches are italicized. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 51 Wire and Harness ID Products Self-Laminating Labels PVF Polyvinyl fluoride thermal transfer printable self-laminating labels Tyco Electronics PVF is a thermal transfer printable, translucent polyvinyl fluoride (Tedlar(R)) film with a permanent acrylic adhesive, designed for wire and cable marking applications that require the `self-extinguishing' properties of Tedlar(R). PVF labels are supplied with a white printable area, which is over-laminated upon application with the translucent portion of the label. This `self-laminating' feature protects the printed area from exposure to oil, solvents, water and abrasion. The low-profile design makes PVF suitable for wrapping onto thin wire gauges. For reliable print performance and durability use with Tyco Electronics 1330-3300 series ribbon. Features and benefits Resists water, oils, and conventional cleaning agents Filters UV light Exhibits high degree of resistance to aging Thermal transfer printable Temperature rating Operating temperature range -53C to +135C -65F to +275F Specifications/approvals Tyco Electronics TTDS-111 Printer information Tyco Electronics printer T308S* (thermal transfer) Tyco Electronics ribbon 1330-3300-10* (thermal transfer) *Alternative printers and ribbons are available for special applications. Contact Tyco Electronics Identification for more information. Part numbering system PVF 080 150 WE 10 Self-Laminating Labels Pack size Color Label height (inches) Label width Product family 52 Catalog 1654227 Revised 04-07 www.tycoelectronics.com Dimensions not italicized are in millimeters while dimensions in inches are italicized. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Ordering information Available sizes and formats Ordering Package Labels description quantity across Max. Cable OD mm (A) Label width inches mm inches (B) Label height mm (C) Printable height inches mm inches (D) Horizontal repeat mm inches (E) Vertical repeat (F) Web width mm inches mm inches PVF050100WE10 10,000 5 5.1 .20 12.70 0.500 25.40 1.000 8.50 0.330 16.80 0.600 31.00 1.222 86.00 3.384 PVF050143WE10 10,000 5 7.6 .30 12.70 0.500 36.50 1.437 12.70 0.500 16.80 0.662 42.20 1.661 86.00 3.384 PVF080150WE10 10,000 4 7.6 .30 20.30 0.800 38.10 1.500 12.70 0.500 22.90 0.900 44.50 1.750 94.90 3.736 PVF100143WE5 5,000 3 7.6 .30 25.40 1.000 36.50 1.437 12.70 0.500 27.90 1.100 42.20 1.661 87.30 3.436 PVF100225WE5 5,000 3 12.2 .48 25.40 1.000 57.20 2.250 19.10 0.750 27.90 1.100 66.70 2.625 87.30 3.436 PVF100375WE2.5 2,500 3 22.4 .88 25.40 1.000 95.30 3.750 25.40 1.000 27.90 1.100 101.60 4.000 87.30 3.436 PVF100594WE1 1,000 3 35.6 1.4 25.40 1.000 151.0 5.940 38.10 1.500 27.90 1.100 158.80 6.250 87.30 3.436 PVF100743WE1 1,000 3 35.6 1.4 25.40 1.000 188.9 7.437 38.10 1.500 27.90 1.100 195.30 7.688 87.30 3.436 PVF190319WE2.5 2,500 2 12.2 .48 48.30 1.900 81.00 3.190 19.10 0.750 50.80 2.000 87.40 3.440 105.10 4.138 PVF190594WE1 1,000 2 35.6 1.4 48.30 1.900 151.00 5.940 38.10 1.500 50.80 2.000 158.80 6.250 105.10 4.138 PVF200143WE2.5 2,500 2 7.6 .30 50.80 2.000 36.50 1.437 12.70 0.500 50.80 2.000 42.20 1.661 107.60 4.236 PVF200225WE2.5 2,500 2 12.2 .48 50.80 2.000 57.20 2.250 19.10 0.750 50.80 2.000 66.70 2.625 107.60 4.236 PVF200375WE2.5 2,500 2 22.4 .88 50.80 2.000 95.30 3.750 25.40 1.000 53.30 2.100 101.60 4.000 111.40 4.386 PVF200743WE1 1,000 2 48.3 1.9 50.80 2.000 188.90 7.437 38.10 1.500 53.30 2.100 195.30 7.688 110.10 4.336 Options Colors Standard White with clear tail Non-Standard Red, Orange, Yellow, Green, Blue, Violet, with clear tail Catalog 1654227 Revised 04-07 www.tycoelectronics.com Dimensions not italicized are in millimeters while dimensions in inches are italicized. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Wire and Harness ID Products PVF Polyvinyl fluoride thermal transfer printable self-laminating labels Self-Laminating Labels Self-Laminating Labels 53 Wire and Harness ID Products Self-Laminating Labels TW Dot matrix printable self-laminating labels Tyco Electronics TW is a dot matrix printable, translucent vinyl film with a permanent acrylic adhesive, supplied with a white printable area, which is over-laminated upon application with the translucent portion of the label. This `self-laminating' feature protects the printed area from exposure to oil, solvents, water and abrasion. TW labels offer excellent conformability to round, irregular or flexible surfaces, and are ideal for wire and cable identification, including flat ribbon cables that are subject to repeated bending. They are UL Listed, with reliable print performance and durability, when used with Tyco Electronics 1892BK01 ribbon. Features and benefits Manufactured with a white coated area for printing or writing on, and with a clear wrap to wind around a wire or cable over the printed surface to seal out impurities that would cause the label to become illegible Protects printed information from chemicals and frequent handling Designed to withstand exposure to oil, solvents, and water Temperature rating Operating temperature range -40C to +80C -40F to +176F Specifications/approvals Industry UL MH17292 Group PGJI2 Printer information Tyco Electronics printer AM6310 (dot matrix) Tyco Electronics ribbon 1892BK01 (dot matrix) Self-Laminating Labels Part numbering system 54 J TW 10 Pack size Product family Label size Catalog 1654227 Revised 04-07 www.tycoelectronics.com Dimensions not italicized are in millimeters while dimensions in inches are italicized. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Ordering information Available sizes and formats Ordering Package Labels description quantity across Max. Cable OD mm inches (A) Label width mm inches (B) Label height mm inches (C) Printable (D) Horizontal height repeat mm inches mm inches (E) Vertical repeat mm inches (F) Web width mm inches J-TW10 10,000 12 5.1 0.20 12.70 0.500 19.10 0.750 9.50 0.375 15.20 0.600 25.40 1.000 205.70 8.100 N-TW10 10,000 16 7.6 0.30 12.70 0.500 36.50 1.437 12.70 0.500 12.70 0.500 38.10 1.500 228.60 9.000 Q-TW10 10,000 9 7.6 0.30 19.10 0.750 44.50 1.750 12.70 0.500 22.90 0.900 50.80 2.000 227.30 8.950 A-TW10 10,000 6 7.6 0.30 20.30 0.800 36.50 1.437 12.70 0.500 22.90 0.900 38.10 1.500 160.00 6.300 O-TW10 10,000 8 7.6 0.30 25.40 1.000 36.50 1.437 12.70 0.500 25.40 1.000 38.10 1.500 228.60 9.000 R-TW5 5,000 8 12.2 0.48 25.40 1.000 57.20 2.250 19.10 0.750 25.40 1.000 63.50 2.500 228.60 9.000 T-TW2.5 2,500 8 22.4 0.88 25.40 1.000 95.30 3.750 25.40 1.000 25.40 1.000 101.60 4.000 228.60 9.000 W1-TW1 1,000 8 35.6 1.40 25.40 1.000 150.90 5.940 38.10 1.500 25.40 1.000 152.40 6.000 228.60 9.000 D1-TW1 1,000 7 35.6 1.40 25.40 1.000 188.90 7.437 38.10 1.500 27.90 1.100 190.50 7.500 218.40 8.600 C1-TW2.5 2,500 3 12.2 0.48 48.30 1.900 3.190 19.10 0.750 50.80 2.000 3.500 175.30 6.900 P-TW5 5,000 4 7.6 0.30 50.80 2.000 36.50 1.437 12.70 0.500 50.80 2.000 38.10 1.500 228.60 9.000 S-TW2.5 2,500 4 12.2 0.48 50.80 2.000 57.20 2.250 19.10 0.750 50.80 2.000 63.50 2.500 228.60 9.000 81.00 88.90 U-TW2.5 2,500 4 22.4 0.88 50.80 2.000 95.30 3.750 25.40 1.000 50.80 2.000 101.60 4.000 228.60 9.000 W2-TW1 1,000 3 48.3 1.90 50.80 2.000 150.90 5.940 38.10 1.500 53.30 2.100 152.40 6.000 182.90 7.200 D3-TW1 1,000 3 48.3 1.90 50.80 2.000 188.90 7.437 38.10 1.500 55.90 2.200 190.50 7.500 188.00 7.400 Options Colors Standard Catalog 1654227 Revised 04-07 www.tycoelectronics.com White with clear tail Dimensions not italicized are in millimeters while dimensions in inches are italicized. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Wire and Harness ID Products TW Dot matrix printable self-laminating labels Self-Laminating Labels Self-Laminating Labels 55 Wire and Harness ID Products Self-Laminating Labels PV Polyvinyl fluoride dot matrix printable self-laminating labels Tyco Electronics PV is a dot matrix printable, translucent polyvinyl fluoride (Tedlar(R)) film with a permanent acrylic adhesive, designed for wire and cable marking applications that require the `self-extinguishing' properties of Tedlar(R). PV labels are supplied with a white printable area, which is over-laminated upon application with the translucent portion of the label. This `self-laminating' feature protects the printed area from exposure to oil, solvents, water and abrasion. The low-profile design makes PV suitable for wrapping onto thin wire gauges. For reliable print performance and durability, use with Tyco Electronics 1892BK01 ribbon. Features and benefits Resists water, oils, and conventional cleaning agents Filters UV light Exhibits high degree of resistance to ageing Self-laminating feature for protection and mark permanence of the printed area of the label Temperature rating Operating temperature range -53C to +135C -65F to +275F Specifications/approvals Tyco Electronics TTDS- 092 Printer information Tyco Electronics printer AM6310 (dot matrix) Tyco Electronics ribbon 1892BK01 (dot matrix) Part numbering system Self-Laminating Labels N- PV 10 56 Pack size Product family Product size Catalog 1654227 Revised 04-07 www.tycoelectronics.com Dimensions not italicized are in millimeters while dimensions in inches are italicized. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 PV Polyvinyl fluoride dot matrix printable self-laminating labels Ordering information Max. Cable OD mm inches (A) Label width (B) Label height mm inches mm inches (C) Printable height mm inches (D) Horizontal repeat mm inches (E) Vertical repeat mm inches (F) Web width mm inches J-PV10 10,000 12 5.1 0.20 12.70 0.500 19.10 0.750 9.50 0.375 15.20 0.600 25.40 1.000 205.70 8.100 N-PV10 10,000 16 7.6 0.30 12.70 0.500 36.50 1.437 12.70 0.500 12.70 0.500 38.10 1.500 228.60 9.000 Q-PV10 10,000 9 7.6 0.30 19.10 0.750 44.50 1.750 12.70 0.500 22.90 0.900 50.80 2.000 227.30 8.950 A-PV10 10,000 6 7.6 0.30 20.30 0.800 36.50 1.437 12.70 0.500 22.90 0.900 38.10 1.500 160.00 6.300 O-PV10 10,000 8 7.6 0.30 25.40 1.000 36.50 1.437 12.70 0.500 25.40 1.000 38.10 1.500 228.60 9.000 R-PV5 5,000 8 12.2 0.48 25.40 1.000 57.20 2.250 19.10 0.750 25.40 1.000 63.50 2.500 228.60 9.000 T-PV2.5 2,500 8 22.4 0.88 25.40 1.000 95.30 3.750 25.40 1.000 25.40 1.000 101.60 4.000 228.60 9.000 W1-PV1 1,000 8 35.6 1.40 25.40 1.000 150.90 5.940 38.10 1.500 25.40 1.000 152.40 6.000 228.60 9.000 D1-PV1 1,000 7 35.6 1.40 25.40 1.000 188.90 7.437 38.10 1.500 27.90 1.100 190.50 7.500 218.40 8.600 C1-PV2.5 2,500 3 12.2 0.48 48.30 1.900 81.00 3.190 19.10 0.750 50.80 2.000 88.90 3.500 175.30 6.900 P-PV5 5,000 4 7.6 0.30 50.80 2.000 36.50 1.437 12.70 0.500 50.80 2.000 38.10 1.500 228.60 9.000 S-PV2.5 2,500 4 12.2 0.48 50.80 2.000 57.20 2.250 19.10 0.750 50.80 2.000 63.50 2.500 228.60 9.000 U-PV2.5 2,500 4 22.4 0.88 50.80 2.000 95.30 3.750 25.40 1.000 50.80 2.000 101.60 4.000 228.60 9.000 W2-PV1 1,000 3 48.3 1.90 50.80 2.000 150.90 5.940 38.10 1.500 53.30 2.100 152.40 6.000 182.90 7.200 D3-PV1 1,000 3 48.3 1.90 50.80 2.000 188.90 7.437 38.10 1.500 55.90 2.200 190.50 7.500 188.00 7.400 Options Colors Standard Catalog 1654227 Revised 04-07 www.tycoelectronics.com White with clear tail Dimensions not italicized are in millimeters while dimensions in inches are italicized. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Self-Laminating Labels Available sizes and formats Ordering Package Labels description quantity across Wire and Harness ID Products Self-Laminating Labels 57 Wire and Harness ID Products Self-Laminating Labels LSR Laser printable self-laminating labels Tyco Electronics LSR is a laser printable, translucent polyester film with a permanent acrylic adhesive, supplied with a white printable area, which is over-laminated upon application with the translucent portion of the label. This `self-laminating' feature protects the printed area from exposure to oil, solvents, water and abrasion with good conformability to round surfaces. LSR is ideal for wire and cable marking including flat ribbon cable. The lowprofile design makes LSR suitable for wrapping onto thin wire gauges. Features and benefits Manufactured with a white coated area for printing or writing on, and with a clear wrap to wind around a wire or cable over the printed surface to seal out impurities that would cause the label to become illegible Protects printed information from chemicals and frequent handling Designed to withstand exposure to oil, solvents, and water Can also be flagged around a wire rather than wrapped Temperature rating Operating temperature range -40C to +150C -40F to +302F Printer information Standard laser printer with auto/manual sheet feed. Self-Laminating Labels Contact Tyco Electronics Identification for more information. 58 Catalog 1654227 Revised 04-07 www.tycoelectronics.com Dimensions not italicized are in millimeters while dimensions in inches are italicized. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 LSR Laser printable self-laminating labels Ordering information Available sizes and formats Ordering Package Labels description quantity across Labels per sheet (A) Label width mm inches (B) Label height mm inches (C) Printable height mm inches (D) Horizontal repeat mm inches (E) Vertical repeat mm inches 13 156 12.70 0.500 19.10 0.750 9.40 0.370 15.20 0.600 20.60 0.810 13 78 12.70 0.500 38.10 1.500 12.70 0.500 15.20 0.600 40.60 1.600 CR-105-LSR 5,040 7 84 25.40 1.000 19.10 0.750 8.60 0.340 27.90 1.100 20.60 0.810 CR-106-LSR 2,520 7 63 25.40 1.000 25.40 1.000 8.60 0.340 27.90 1.100 27.90 1.100 CR-107-LSR 2,499 7 49 25.40 1.000 33.80 1.330 12.70 0.500 27.90 1.100 36.60 1.440 CR-108-LSR 1,008 7 21 25.40 1.000 80.50 3.170 24.60 0.970 27.90 1.100 84.10 3.310 CR-110-LSR 1,008 4 12 47.80 1.880 80.50 3.170 24.60 0.970 50.80 2.000 83.30 3.280 Self-Laminating Labels CR-100-LSR 4,992 CR-101-LSR 4,992 Wire and Harness ID Products Self-Laminating Labels Catalog 1654227 Revised 04-07 www.tycoelectronics.com Dimensions not italicized are in millimeters while dimensions in inches are italicized. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 59 Wire and Harness ID Products Self-Laminating Labels CSL A4 Laser printable self-laminating labels Tyco Electronics CSL is a laser printable, clear polyester film with a permanent acrylic adhesive, supplied with a white or yellow printable area, which is over-laminated upon application with the clear section of the label. Using the over-lamination process protects the printed area against exposure to oil, solvents, water and abrasion. Features and benefits Manufactured with a white or yellow coated area for writing on, and with a clear wrap to wind around a wire or cable to cover the written legend and to protect it against impurities that would cause the label to become illegible Protects printed information from chemicals and frequent handling Designed to withstand exposure to Solvents, salts, alkalis and water Can also be flagged around a wire rather than wrapped Temperature rating Operating temperature range -30C to +120C -22F to +248F Part numbering system Self-Laminating Labels CSL- 034 23 P- 4 60 Color Material (Polyester) Label width Label height Product family Catalog 1654227 Revised 04-07 www.tycoelectronics.com Dimensions not italicized are in millimeters while dimensions in inches are italicized. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 CSL A4 Laser printable self-laminating labels Ordering information B A C Available sizes and formats Ordering Markers/ description pack A height B height C width Max. cable diameter inches mm inches inches mm inches CSL-02713P-<color> 160 26.70 1.05 6.00 0.24 12.50 0.49 3.00 0.12 CSL-03418P-<color> 88 33.90 1.33 8.50 0.33 18.18 0.72 5.00 0.20 CSL-03425P-<color> 64 33.90 1.33 12.70 0.50 25.00 0.98 5.00 0.20 CSL-05525P-<color> 40 55.00 2.17 12.70 0.50 25.00 0.98 11.00 0.43 CSL-06925P-<color> 32 69.00 2.72 17.00 0.67 25.00 0.98 14.00 0.55 mm mm CSL-06933P-<color> 24 69.00 2.72 22.00 0.87 33.33 1.31 13.00 0.51 CSL-09333P-<color> 18 93.00 3.66 25.40 1.00 33.33 1.31 19.00 0.75 CSL-14033P-<color> 12 140.00 5.51 25.40 1.00 33.33 1.31 34.00 1.34 Colors Yellow White Code 4 Wire and Harness ID Products Self-Laminating Labels Options Self-Laminating Labels 9 Catalog 1654227 Revised 04-07 www.tycoelectronics.com Dimensions not italicized are in millimeters while dimensions in inches are italicized. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 61 Wire and Harness ID Products Self-Laminating Labels TKM Hand writable booklet self-laminating labels Tyco Electronics TKM is a self writable, clear vinyl film with a permanent acrylic adhesive, supplied with a white writable area, which is over-laminated upon application with the clear portion of the label. TKM labels are a quick, simple and durable form of wire, cable and pipe identification. . Features and benefits Manufactured with a white coated area for writing on, and with a clear wrap to wind around a wire or cable to cover the written legend and to protect it against impurities that would cause the label to become illegible Protects printed information from chemicals and frequent handling Supplied in a handy pocket size booklet Temperature rating Designed to withstand exposure to Solvents, salts, alkalis and water Specifications/Approvals Operating temperature range Tyco Electronics -54C to +82C -65F to +180F TTDS-056 Part numbering system Self-Laminating Labels TKM 75 WE - N 62 Standard Packaging Color (WE=White) Label size Product family Catalog 1654227 Revised 04-07 www.tycoelectronics.com Dimensions not italicized are in millimeters while dimensions in inches are italicized. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 TKM Hand writable booklet self-laminating labels Ordering information B A C Available sizes and formats Ordering Markers/ description pack A height mm B height inches mm C width inches mm inches Max. cable diameter mm inches TKM75WE-N 60 75.00 3.0 25.00 1.00 25.00 1.00 14.00 0.60 TKM150WE-N 30 150.00 6.0 25.00 1.00 25.00 1.00 38.00 1.50 TKM230WE-N 30 230.00 9.0 25.00 1.00 25.00 1.00 63.00 2.50 Accessories for manual marking Ordering Description description Wire and Harness ID Products Self-Laminating Labels Quantity per pack Felt-tip pen, fine 1 ZUB-03 Pencil for UV-resistant labelling 1 Self-Laminating Labels ZUB-01 Catalog 1654227 Revised 04-07 www.tycoelectronics.com Dimensions not italicized are in millimeters while dimensions in inches are italicized. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 63 Wire and Harness ID Products Self-Laminating Label Dimensions Self-Laminating Label Dimensions 25.4mm 19.1mm 8.5mm Print area 25.4mm 19.1mm 9.5mm Print area J-TW10 J-PV10 38.1mm Print area Q-TW10 Q-PV10 SP050100WE10 SB050100WE10 PVF050100WE10 12.7mm 25.4mm 150.9mm 36.5mm 12.7mm Print area 20.3mm 12.7mm Print area 19.1mm Print area 12.7mm Print area 38.1mm 20.3mm 57.2mm SB050143WE10 PVF050143WE10 N-TW10 N-PV10 36.5mm 12.7mm Print area 12.7mm 44.5mm 12.7mm SP100225WE5 SB100225WE5 PVF100225WE5 R-TW5 R-PV5 SP100594-WE1 SB100594WE1 PVF100594WE1 W1-TW1 W1-PV1 SP080150WE10 SB080150WE10 PVF080150WE10 50.8mm A-TW10 A-PV10 19.1mm Print area Self-Laminating Labels 36.5mm 12.7mm Print area 57.2mm 25.4mm SP100143WE5 SB100143WE5 PVF100143WE5 O-TW10 O-PV10 25.4mm SP200225WE2.5 SB200225WE2.5 PVF200225WE2.5 S-TW2.5 S-PV2.5 25.4mm Print area SP100375WE2.5 SB100375WE2.5 PVF100375WE2.5 T-TW2.5 T-PV2.5 36.5mm 12.7mm Print area 19.1mm Print area 81.0mm SB200143WE2.5 PVF200143WE2.5 P-TW5 P-PV5 19.1mm 23.9mm 48.3mm 95.3mm 50.8mm SB190319WE2.5 PVF190319WE2.5 C1-TW2.5 C1-PV2.5 9.5mm Print area SP075094WE10 Note: Drawing is not to scale 64 Catalog 1654227 Revised 04-07 www.tycoelectronics.com Dimensions not italicized are in millimeters while dimensions in inches are italicized. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Self-Laminating Label Dimensions 50.8mm 38.1mm Print area 25.4mm 38.1mm Print area 50.8mm 38.1mm Print area SB200743WE1 PVF200743WE1 D3-TW1 D3-PV1 50.8mm SB190594WE1 PVF190594WE1 25.4mm Print area 95.3mm 150.9mm 188.9mm 38.1mm Print area SB100743WE1 PVF100743WE1 D1-TW1 D1-PV1 SP200375WE2.5 SB200375WE2.5 PVF200375WE2.5 U-TW2.5 U-PV2.5 Self-Laminating Labels 48.3mm 188.9mm 150.9mm W2-TW1 W2-PV1 Wire and Harness ID Products Self-Laminating Labels Note: Drawing is not to scale Catalog 1654227 Revised 04-07 www.tycoelectronics.com Dimensions not italicized are in millimeters while dimensions in inches are italicized. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 65 Wire and Harness ID Products Self-Laminating Labels TEK Hand writeable vinyl fabric labels Tyco Electronics TEK vinyl fabric pocket packs are suitable for onthe-spot labeling. Thanks to their handy size they fit in the pocket or the technician's toolbox. The packs are available in the most common label sizes. They can be written on using the pencil (ZUB-03) or the felt-tip pen (ZUB-01). Features and benefits Portability On the spot labeling Temperature rating Operating temperature range -29C to +80C -20F to +176F Properties Self-Laminating Labels Adhesive removal without residue (approx. 1 year). Very pliable film. Age resistant. Fabric materials silicone free. 66 Resistant against Water, sea water, alcohol, engine oils, methanol, petrol (gasoline) Part numbering system TEK 8 21 - N Standard Packaging Label width (mm) Label height (mm) Product family Catalog 1654227 Revised 04-07 www.tycoelectronics.com Dimensions not italicized are in millimeters while dimensions in inches are italicized. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 TEK Hand writeable vinyl fabric labels Ordering information A B Available sizes and formats Ordering Markers/ description pack (A) height (B) width Black Border mm inches mm inches with without TEK 821-N 640 8.00 2.0 21.00 0.60 - X TEK 914-N 840 9.00 3.0 14.00 1.00 - X TEK 1119-N 440 11.00 6.0 19.00 1.00 X - TEK 1138-N 220 11.00 9.0 38.00 1.00 X - Accessories for manual marking Ordering Description description Wire and Harness ID Products Self-Laminating Labels Quantity per pack Felt-tip pen, fine 1 ZUB-03 Pencil for UV-resistant labelling 1 Self-Laminating Labels ZUB-01 Catalog 1654227 Revised 04-07 www.tycoelectronics.com Dimensions not italicized are in millimeters while dimensions in inches are italicized. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 67 Wire and Harness ID Products Self-Laminating Labels CMD Cable and wire marker dispenser Tyco Electronics CMD is one of the most user friendly portable wire marker systems available. Each dispenser contains 10 rolls of individually numbered marker tape. Each roll of markers contains 76 individual markers which are a convenient length that accommodates most commonly identified wire sizes. Manufactured from DuPont Tyvek(R) material to ensure durability and minimize the potential of tearing. Features and benefits Supplied with a pre-determined length of 32mm and a width of 6.4mm Supplied in a handy pocket size reusable dispenser Aggressive acrylic adhesive impervious to oil and water Temperature rating Operating temperature range -40C to +80C -40F to +176F Specifications/approvals Tyco Electronics TTDS-141 Self-Laminating Labels Part numbering system 68 CMD - 0-9 Contents Product family Catalog 1654227 Revised 04-07 www.tycoelectronics.com Dimensions not italicized are in millimeters while dimensions in inches are italicized. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 CMD Cable and wire marker dispenser Ordering information A B Available sizes and formats Ordering Markers/ description pack (A) height (B) width Comments mm inches mm CMD-0-9 10 x 76 32.0 1.25 6.4 0.25 Loaded dispenser contains markers pre-marked 0 to 9 CMD-CC 10 x 76 32.0 1.25 6.4 0.25 Loaded dispenser contains colour coded markers Wire and Harness ID Products Self-Laminating Labels inches Extra Items CMD-0-9-REFILL 10 x 76 32.0 1.25 6.4 0.25 Refill box pre-marked 0 to 9 CMD-CC-REFILL 10 x 76 32.0 1.25 6.4 0.25 Refill box colour coded N/A N/A N/A CMD-A-REFILL 10 x 76 32.0 1.25 6.4 0.25 Empty dispenser Refill box pre-marked A CMD-B-REFILL 10 x 76 32.0 1.25 6.4 0.25 Refill box pre-marked B CMD-C-REFILL 10 x 76 32.0 1.25 6.4 0.25 Refill box pre-marked C CMD-D-REFILL 10 x 76 32.0 1.25 6.4 0.25 Refill box pre-marked D CMD-E-REFILL 10 x 76 32.0 1.25 6.4 0.25 Refill box pre-marked E CMD-F-REFILL 10 x 76 32.0 1.25 6.4 0.25 Refill box pre-marked F CMD-G-REFILL 10 x 76 32.0 1.25 6.4 0.25 Refill box pre-marked G CMD-H-REFILL 10 x 76 32.0 1.25 6.4 0.25 Refill box pre-marked H CMD-L-REFILL 10 x 76 32.0 1.25 6.4 0.25 Refill box pre-marked L CMD-N-REFILL 10 x 76 32.0 1.25 6.4 0.25 Refill box pre-marked N CMD-R-REFILL 10 x 76 32.0 1.25 6.4 0.25 Refill box pre-marked R CMD-S-REFILL 10 x 76 32.0 1.25 6.4 0.25 Refill box pre-marked S CMD-T-REFILL 10 x 76 32.0 1.25 6.4 0.25 Refill box pre-marked T CMD-U-REFILL 10 x 76 32.0 1.25 6.4 0.25 Refill box pre-marked U CMD-V-REFILL 10 x 76 32.0 1.25 6.4 0.25 Refill box pre-marked V CMD-W-REFILL 10 x 76 32.0 1.25 6.4 0.25 Refill box pre-marked W CMD-MINUS-REFILL 10 x 76 32.0 1.25 6.4 0.25 Refill box pre-marked - CMD-PLUS-REFILL 10 x 76 32.0 1.25 6.4 0.25 Refill box pre-marked + Catalog 1654227 Revised 04-07 www.tycoelectronics.com Dimensions not italicized are in millimeters while dimensions in inches are italicized. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 Self-Laminating Labels CMD-EMPTY South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 69 Wire and Harness ID Products Self-Laminating Labels WCD Write-on self-laminating label dispensers Tyco Electronics WCD is a pocket sized label dispenser containing a roll of pre-cut self-laminating cable markers. Each market has a white markable area for legend inscription using the specified marker pen (ZUB-01). Manufactured with a white coated area for writing on, and with a clear wrap to wind around a wire or cable to cover the written legend and to protect it against impurities that would cause the label to become illegible. Features and benefits Protects printed information from chemicals and frequent handling Supplied in a handy pocket size disposable dispenser Aggressive acrylic adhesive impervious to oil and water Temperature rating Operating temperature range -40C to +80C -40F to +176F Specifications/approvals Self-Laminating Labels Tyco Electronics 70 TTDS-140 Part numbering system WCD - 318 Label Length (ex: 31.8 mm) Product family Catalog 1654227 Revised 04-07 www.tycoelectronics.com Dimensions not italicized are in millimeters while dimensions in inches are italicized. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 WCD Write-on self-laminating label dispensers Ordering information B A C Available sizes and formats Ordering Markers/ description pack (A) height (B) height (C) width Max. Cable diameter mm inches mm inches mm inches WCD-318 300 31.8 1.25 7.95 0.31 19.0 0.75 7.6.2 0.30 WCD-476 150 47.6 1.87 12.7 0.50 19.0 0.75 10.16 0.40 WCD-762 90 76.2 3.0 19.0 0.75 19.0 0.75 17.78 0.70 WCD-1520 40 152.0 5.98 25.4 1.00 19.0 0.75 40.64 1.60 Accessories for manual marking Ordering Description description mm Wire and Harness ID Products Self-Laminating Labels inches Quantity per pack Felt-tip pen, fine 1 ZUB-03 Pencil for UV-resistant labelling 1 Self-Laminating Labels ZUB-01 Catalog 1654227 Revised 04-07 www.tycoelectronics.com Dimensions not italicized are in millimeters while dimensions in inches are italicized. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 71 Wire and Harness ID Products Pre-Printed Wire and Cable Markers K-Type(R) cable markers K-Type(R) markers are used to identify wire bundles, cables, pipes and conduits using specially designed oval shaped, individual characters that slide on to a PVC carrier, which is then attached to the substrate using cable ties. K-Type(R) markers are ideal for post termination applications or where retrofit is anticipated. These markers are supplied yellow with black legends and in the standard International colour code option and are supplied on reels. K-Type(R) markers come in one standard size to fit carrier strips that can hold from 7 to 18 markers and are made from a plasticized PVC material. Features and benefits Versatile marking system for cables , cable bundles and conduit Elliptical marker profile allows easy fitting to carrier strips Temperature rating Operating temperature range -40C to +70C -40F to +158F Specifications/approvals Tyco Electronics TTDS- 025 Pre-Printed Wire and Cable Markers Part numbering system 72 1361 1 4 01 Legend code Color code Packaging code Product/size code Catalog 1654227 Revised 04-07 www.tycoelectronics.com Dimensions not italicized are in millimeters while dimensions in inches are italicized. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 K-Type(R) cable markers Ordering information Markers Size code Marker size Marker Length (mm) Cable diameter (mm) Reel quantity 65 60 4.2 - 7.0 500 1361 Packaging Code 1 Reel Color Code (Available for All Legends) 4 Yellow 9 White International color code Legend Marker Color Ink Color Legend Marker Color Ink Color Legend Marker Color 0 Black White 1 Brown White 2 Red Ink Color Black 3 Orange Black 4 Yellow Black 5 Green Black 6 Blue Black 7 Violet Black 8 Gray Black 9 White Black Legend Legend Code Legend Code 0 Code 00 J 19 / 38 1 01 K 20 ~ 39 2 02 L 21 Earth 40 3 03 M 22 ) 41 4 04 N 23 Blank 42 5 05 O 24 : 43 6 06 P 25 , 44 7 07 Q 26 < 45 8 08 R 27 > 46 9 09 S 28 = 47 A 10 T 29 . 48 B 11 U 30 C 12 V 31 D 13 W 32 E 14 X 33 F 15 Y 34 G 16 Z 35 H 17 + 36 I 18 - 37 Pre-Printed Wire and Cable Markers Legend code Carrier Strips Order code Capacity Quantity 11320000 7 markers 500 11310000 12 markers 500 11300000 18 markers 250 11330000 * 12 markers 100 * This carrier can be used to flag Catalog 1654227 Revised 04-07 www.tycoelectronics.com Dimensions not italicized are in millimeters while dimensions in inches are italicized. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 Wire and Harness ID Products Pre-Printed Wire and Cble Markers South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 73 Wire and Harness ID Products Pre-Printed Wire and Cable Markers G-Type(R) push-on wire markers G-Type(R) markers are individual push-on characters used to identify wires and small cables. They are designed with an expanding profile, enabling each marker to accommodate a wide range of wire/cable sizes. The markers are supplied chevron cut to ensure the legend remains aligned. G-Type(R) markers are yellow with black legends and are supplied as loose pieces packed in boxes. G-Type(R) markers are particularly suitable for applications requiring low fire hazard properties. They are made from a self-extinguishing modified thermoplastic polymer and are halogen, silicone and cadmium free. Features and benefits Low Fire Hazard Zero halogen, self extinguishing material Gusseted design allows marker to fit over a wide range of cable diameters Chevron cut ensures markers stay aligned Specifications/approvals Tyco Electronics TTDS- 024 Temperature rating Operating temperature range -45C to +70C -50F to +158F Flammability Pre-Printed Wire and Cable Markers LOI 40%, FTI > 300C 74 Part numbering system 0719 1 4 01 Legend code Color code (4 = yellow only) Packaging code (1 = box only) Product/size code Catalog 1654227 Revised 04-07 www.tycoelectronics.com Dimensions not italicized are in millimeters while dimensions in inches are italicized. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 G-Type(R) push-on wire markers Ordering information Size code Marker size Cable diameter (mm) Box quantity 0719 G3/10 1.4 - 2.5 1000 0720 G3/20 2.0 - 3.5 1000 0721 G4/10 3.0 - 6.0 500 0722 G6/10 5.0 - 9.5 250 0723 G6/20 8.0 - 12.5 250 Packaging Code 1 Box Color Code (Available for All Legends) 4 Yellow Legend Legend Code Legend Code 0 Code 00 J 19 / 38 1 01 K 20 ~ 39 2 02 L 21 Earth 40 3 03 M 22 ) 41 4 04 N 23 Blank 42 5 05 O 24 : 43 6 06 P 25 , 44 7 07 Q 26 < 45 8 08 R 27 > 46 9 09 S 28 = 47 A 10 T 29 . 48 B 11 U 30 L1 51 C 12 V 31 L2 52 D 13 W 32 L3 53 E 14 X 33 Serd 54 F 15 Y 34 PE 55 G 16 Z 35 PEN 56 H 17 + 36 ( 62 I 18 - 37 Catalog 1654227 Revised 04-07 www.tycoelectronics.com Dimensions not italicized are in millimeters while dimensions in inches are italicized. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 Pre-Printed Wire and Cable Markers Legend code Wire and Harness ID Products Pre-Printed Wire and Cable Markers South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 75 Wire and Harness ID Products Pre-Printed Wire and Cable Markers Z-Type(R) push-on wire markers Z-Type(R) markers are individual push-on characters used to identify wires and small cables permanently. They are designed with an expanding profile, enabling each marker to accommodate a wide range of wire/cable sizes. Z-Type(R) markers are a simple, cost-effective solution for many commercial wire identification applications. The markers are supplied either straight cut or chevron cut: the chevron cut option ensures the legends remain aligned. Standard Z-Type(R) markers are yellow or white with black legends and can be supplied as loose pieces packed in boxes or on reels. Color coded markers are also available. Features and benefits Resistant to sea water, fuels and oils 9 sizes covering wire diameters from1.5mm to 12.7mm (0.06 inches to 0.5 inches) Applicator wands available for easy marker installation Specifications/approvals Tyco Electronics TTDS- 026 Temperature rating Pre-Printed Wire and Cable Markers Operating temperature range 76 -45C to +70C -50F to +158F Part numbering system 0616 1 4 00 Legend code Color code Packaging code Product/size code Catalog 1654227 Revised 04-07 www.tycoelectronics.com Dimensions not italicized are in millimeters while dimensions in inches are italicized. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Z-Type(R) push-on wire markers Ordering information Size code (straight cut) Size code (chevron cut) Marker size Marker Length (mm) Pack quantity mm Cable diameter inches 0580 1151 5 4.5 1000 1.5 - 2.0 0.06 - 0.08 0581 1152 7 4.5 1000 2.0 - 3.2 0.08 - 0.13 0615 1153 9 4.5 1000 2.5 - 4.0 0.10 - 0.16 0616 1154 11 4.5 1000 2.9 - 4.7 0.11 - 0.19 0617 1155 13 4.5 1000 3.4 - 5.7 0.13 - 0.22 0618 1156 15 4.5 1000 3.8 - 6.3 0.15 - 0.25 0620 1157 18 4.5 500 4.3 - 6.9 0.17 - 0.27 0622 1158 23 6.0 500 5.5 - 8.9 0.22 - 0.35 0624 1159 35 6.0 250 7.9 - 12.7 0.31 - 0.50 Packaging Code 1 Box 3 Reel Color Code (Available for All Legends) 9 White Packaging Options available Straight Cut White marker with black legend: Yellow marker with black legend: Color coded Color Code Legend Chevron cut White marker with black legend: Yellow marker with black legend: Color coded Boxes, reels Reels Boxes Marker Color Ink Color Marker Color Ink Color 0 Black White 1 Brown White 2 Red Black 3 Orange Black 4 Yellow Black 5 Green Black 6 Blue Black 7 Violet Black 8 Gray Black 9 White Black Order example: 06161400 Legend code Legend 0 1 2 3 4 5 6 7 8 9 A B C D E F G H I Legend Boxes Reels Boxes, reels Pre-Printed Wire and Cable Markers 4 Yellow (Z-Type(R) markers, size 11, yellow marker with black legend 0, boxed) Code 00 01 02 03 Legend J K L M Code 19 20 21 22 Legend / ~ Earth ) Code 38 39 40 41 04 N 23 Blank 42 05 06 07 08 09 O P Q R S 24 25 26 27 28 : , < > = 43 44 45 46 47 10 11 T U 29 30 . 48 12 13 14 V W X 31 32 33 15 16 17 Y Z + 34 35 36 18 - 37 Applicators Order Code 12510000 12530000 12550000 Catalog 1654227 Revised 04-07 www.tycoelectronics.com Marker Size 7 11 15 Pack Quantity 1 1 1 Dimensions not italicized are in millimeters while dimensions in inches are italicized. Order Code 12520000 12540000 12560000 Dimensions are shown for reference purposes only. Specifications subject to change. Marker Size 9 13 18 Pack Quantity 1 1 1 USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 Wire and Harness ID Products Pre-Printed Wire and Cable Markers South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 77 Wire and Harness ID Products Pre-Printed Wire and Cable Markers V-TypeTM Manual wire and cable markers V-TypeTM markers are individual push-on characters used to identify wires and small cables permanently. They are designed with an expanding profile, enabling each marker to accommodate a wide range of wire/cable sizes. V-TypeTM markers are a simple, cost-effective solution for many commercial wire identification applications. The markers are supplied chevron cut and this ensures the legends remain aligned. Standard V-TypeTM markers are yellow or white with black legends and can be supplied as loose pieces packed in boxes, on reels or flat disc reels. Color coded markers are also available. Features and benefits Resistant to sea water, fuels and oils 4 sizes covering wire diameters from1.4mm to 16.0mm (0.06 inches to 0.63 inches) Specifications/approvals Tyco Electronics TTDS-096 Temperature rating Pre-Printed Wire and Cable Markers Operating temperature range 78 -45C to +70C -50F to +158F Part numbering system 0761 1 4 00 Mark/legend code Color code Packaging code Size code Catalog 1654227 Revised 04-07 www.tycoelectronics.com Dimensions not italicized are in millimeters while dimensions in inches are italicized. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 V-TypeTM Manual wire and cable markers Ordering information Size code Marker size Cable diameter Packed inches mm 0761 3 1.4 - 2.8 0.06 - 0.11 1000 0762 5 2.8 - 5.0 0.11 - 0.20 1000 0763 10 4.0 - 10.0 0.16 - 0.39 500 0764 15 8.0 - 16.0 0.31 - 0.63 250 Packaging Code 1 Box 3 Reel Color Code (Available for All Legends) 4 Yellow 9 White Color code (for numbers 0-9 only) Legend Marker Color Ink Color Legend Marker Color Ink Color Legend Marker Color 0 Black White 1 Brown White 2 Red Ink Color White 3 Orange Black 4 Yellow Black 5 Green White 6 Blue White 7 Violet White 8 Gray Black 9 White Black Wire and Harness ID Products Pre-Printed Wire and Cable Markers Legend Legend Code Legend Code 0 Code 00 J 19 / 38 1 01 K 20 ~ 39 2 02 L 21 Earth 40 3 03 M 22 ) 41 4 04 N 23 Blank 42 5 05 O 24 : 43 6 06 P 25 , 44 7 07 Q 26 < 45 8 08 R 27 > 46 9 09 S 28 = 47 A 10 T 29 . 48 B 11 U 30 C 12 V 31 D 13 W 32 E 14 X 33 F 15 Y 34 G 16 Z 35 H 17 + 36 I 18 - 37 Catalog 1654227 Revised 04-07 www.tycoelectronics.com Dimensions not italicized are in millimeters while dimensions in inches are italicized. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 Pre-Printed Wire and Cable Markers Mark/Legend code South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 79 O-TypeTM Manual wire and cable markers The O-TypeTM markeris a thin walled plasticised PVC marker which is particularly suited to high density wiring applications where space saving is paramount. They are color coded to BS3858: 1992 which includes repeated printing of the individual digit three times around the circumference of the marker. Letters and symbols are printed on a pink background. Features and benefits Conforms to BS3858: 192 Type 3 Color coding enables identification when mark is obscured Thin wall for densely packed wiring Nine sizes of marker cover cable sizes up to 16mm2 Temperature rating Operating temperature range Pre-Printed Wire and Cable Markers Wire and Harness ID Products Pre-Printed Wire and Cable Markers 80 -65C to +95C -85F to +203F Part numbering system 1106 99 10 Mark/Legend code Color code Size code Catalog 1654227 Revised 04-07 www.tycoelectronics.com Dimensions not italicized are in millimeters while dimensions in inches are italicized. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 O-TypeTM Manual wire and cable markers Ordering information Size Code Part Cut Cable Diameter mm Cable Size mm2 Marker Size Marker Length mm Packed 1106 0.6 - 1.0 - 0.75 3.0 1000 1107 0.9 - 1.3 - 10 4.0 1000 1108 1.1 - 1.6 - 12 3.0 1000 1109 1.4 - 2.1 - 15 3.0 1000 1110 1.9 - 2.8 - 20 5.0 1000 1111 2.4 - 3.5 1.0 25 5.0 1000 1112 2.9 - 4.8 1.5 30 5.0 1000 1113 3.9 - 5.8 2.5 & 4.0 40 5.0 1000 1114 5.3 - 8.0 6.0 & 10.0 55 5.0 1000 Color Code (Available for All Legends) 99 Pink Color code (for numbers 0-9 only) Legend Marker Color Ink Color Legend Marker Color Ink Color Legend Marker Color 0 Black White 1 Brown White 2 Red Ink Color Black 3 Orange Black 4 Yellow Black 5 Green Black 6 Blue Black 7 Violet Black 8 Gray Black 9 White Black Wire and Harness ID Products Pre-Printed Wire and Cable Markers Legend Legend Code Legend Code Legend Code 0 Code 00 J 19 / 38 SO 57 1 01 K 20 ~ 39 -10 58 2 02 L 21 Earth 40 -1 59 3 03 M 22 ) 41 -2 60 4 04 N 23 Blank 42 5 05 O 24 : 43 6 06 P 25 , 44 7 07 Q 26 < 45 8 08 R 27 > 46 9 09 S 28 = 47 A 10 T 29 Fullstop 48 B 11 U 30 A 49 C 12 V 31 O 50 D 13 W 32 L1 51 E 14 X 33 L2 52 F 15 Y 34 L3 53 G 16 Z 35 SERD 54 H 17 + 36 PE 55 I 18 - 37 PEN 56 Catalog 1654227 Revised 04-07 www.tycoelectronics.com Dimensions not italicized are in millimeters while dimensions in inches are italicized. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Pre-Printed Wire and Cable Markers Legend code 81 Wire and Harness ID Products Pre-Printed Wire and Cable Markers 82 Pre-Printed Wire and Cable Markers Snap-On wire markers Tyco Electronics snap-on markers are convenient and easy to use. These markers are supplied on a `wand' applicator that simplifies and reduces installation time, and saves on the cost of marking. Snap-on wire markers are designed to stand the test of time, preventing costly re-work before the life of the equipment ends. This is why Tyco Electronics snap-on markers are found today in power stations, oil refineries, offshore platforms, and other major projects around the world. Features and benefits Snap-on markers are the perfect way to permanently and rapidly mark cables, wires, leads, and cores after termination and installation Easy to alter identification on cables that are already marked Secure grip for positive fixing to cable The high elasticity of the marker enables all types of installation and conduction material to be permanently marked without damage Applicator has a patented slit to prevent over-expansion of the marker during application Made from polyoxymethylene which guarantees strength, dimensional stability, low moisture absorption, and resistance to chemicals Resistant against oils, cleaning agents, fuels, and alkaline solutions Zero-halogen material Ten sizes for cable diameters 0.04" to 0.75" (1.0mm to 19.0mm) Color-coded option Catalog 1654227 Revised 04-07 www.tycoelectronics.com Dimensions not italicized are in millimeters while dimensions in inches are italicized. Specifications/approvals Tyco Electronics TTDS- 094 Temperature rating Operating temperature range -40C to +106C -40F to +223F Part numbering system STD 06 W -4 Legend code Color code (W=white) Size Snap-on Marker Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Snap-On wire markers Ordering information Size Code mm Cable Diameter Color of Applicator Wand STD 01 1.00 - 1.40 0.040 - 0.055 Brown STD 02 1.40 - 1.80 0.055 - 0.071 Gray 10 mounting wands with 30 identical markers STD 03 1.90 - 2.65 0.075 - 0.104 Green 10 mounting wands with 30 identical markers 10 mounting wands with 30 identical markers inches Packed Box 10 mounting wands with 30 identical markers STD 05 2.30 - 3.00 0.091 - 0.118 Natural STD 06 2.60 - 3.50 0.102 - 0.138 Red 10 mounting wands with 30 identical markers STD 09 3.25 - 4.50 0.128 - 0.177 Blue 10 mounting wands with 30 identical markers STD12 4.50 - 6.00 0.177 - 0.236 Yellow 10 mounting wands with 30 identical markers STD 15 5.80 - 8.50 0.228 - 0.335 Orange* 50 identical markers; applicator available on request STD 17 8.50 - 11.50 0.335 - 0.452 Orange* 50 identical markers; applicator available on request STD 21 11.00 - 15.50 0.433 - 0.610 Gray* 50 identical markers; applicator available on request STD 24 15.00 - 19.00 0.590 - 0.750 Gray* 50 identical markers; applicator available on request Color Code (Available for All Legends) Y Yellow W White Legend Legend Code Legend Code 0 Code 0 J J / Slash 1 1 K K Earth Earth 2 2 L L Blank Blank 3 3 M M : Colon 4 4 N N = Equals 5 5 O O . Dot 6 6 P P 7 7 Q Q 8 8 R R 9 9 S S A A T T B B U U C C V V D D W W E E X X F F Y Y G G Z Z H H + Plus I I - Minus Pre-Printed Wire and Cable Markers Legend code Applicators Order Code STD15 - Applicator STD17 - Applicator STD21 - Applicator STD24- Applicator Catalog 1654227 Revised 04-07 www.tycoelectronics.com Marker Size 15 17 21 24 Color of Applicator Orange Orange Gray Gray Dimensions not italicized are in millimeters while dimensions in inches are italicized. Number of Applications Per Pack 5 5 2 2 Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 Wire and Harness ID Products Pre-Printed Wire and Cable Markers South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 83 Wire and Harness ID Products Pre-Printed Wire and Cable Markers CWM Wire marker cards Tyco Electronics CWM are pre-printed wire markers made with our white vinyl coated cloth tape material, supplied on a thick, easy to handle card stock, with a permanent, rubber based, pressure sensitive adhesive for easy application. Ideal for basic wire marking applications where pre-printed single or double-digit legends and some resistance to a variety of solvents, water, oil, dirt and heat is required. Features and benefits Convenient and easy to use Pre-printed for on-site wire marking Available in colors for color coding applications Available in single and multiple digit legends Specifications/approvals Tyco Electronics TTDS- 100 Temperature rating -40C to +82C -40F to +180F Pre-Printed Wire and Cable Markers Operating temperature range 84 Catalog 1654227 Revised 04-07 www.tycoelectronics.com Dimensions not italicized are in millimeters while dimensions in inches are italicized. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 CWM Wire marker cards Ordering information Product Order Code Legend Option Package Quantity Label Width Label Height Card Width mm inches mm inches 6.4 0.250 38.1 1.500 Card Height mm inches 235.0 9.250 CWM-SL-# * Solid Numbers 0-99 25 Cards (825 labels) mm 50.8 inches 2.000 CWM-SL-letter * Solid Letters A - Z 25 Cards (825 labels) 6.4 0.250 38.1 1.500 CWM-SL-color * Solid Colors 25 Cards (825 labels) 6.4 0.250 38.1 1.500 235.0 9.250 50.8 2.000 235.0 9.250 50.8 CWM-SL-legend * Solid 2+ Digits 25 Cards (825 labels) 6.4 0.250 38.1 2.000 1.500 235.0 9.250 50.8 CWM-SQ-1-33 Sequential 1 - 33 25 Cards (825 labels) 6.4 0.250 2.000 38.1 1.500 235.0 9.250 50.8 CWM-SQ-34-66 Sequential 34 - 66 25 Cards (825 labels) 6.4 2.000 0.250 38.1 1.500 235.0 9.250 50.8 CWM-SQ-67-99 Sequential 67 - 99 25 Cards (825 labels) 2.000 6.4 0.250 38.1 1.500 235.0 9.250 50.8 CWM-SQ-A-Z Sequential A - Z 2.000 25 Cards (825 labels) 6.4 0.250 38.1 1.500 235.0 9.250 50.8 CWM-SQ-AA-ZZ 2.000 Sequential AA - ZZ 25 Cards (825 labels) 6.4 0.250 38.1 1.500 235.0 9.250 50.8 2.000 CWM-SQ-a-z Sequential a - z 25 Cards (825 labels) 6.4 0.250 38.1 1.500 235.0 9.250 50.8 2.000 CWM-SQ-1-6 Sequential 1 - 6 25 Cards (825 labels) 6.4 0.250 38.1 1.500 235.0 9.250 50.8 2.000 CWM-SQ-1-18 Sequential 1 - 18 25 Cards (825 labels) 6.4 0.250 38.1 1.500 235.0 9.250 50.8 2.000 Pre-Printed Wire and Cable Markers *Solid cards (SL) = 1 legend on each card. Select a single legend and add to the suffix of the product order code. *Sequential cards (SQ) = a consecutive range of alpha or numeric legends on each card, as specified in the suffix of the product order code. *Available options on product order code CWM-SL-legends are: T1, T2, T3, L1, L2, L3, GND, P1, A1, XS, PTO. Add legend suffix of order code. Wire and Harness ID Products Pre-Printed Wire and Cable Markers Catalog 1654227 Revised 04-07 www.tycoelectronics.com Dimensions not italicized are in millimeters while dimensions in inches are italicized. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 85